With commit 9e124fe16ff2("xen: Enable console tty by default in domU
if it's not a dummy") a hack was implemented to make sure that the
tty console remains the console behind the /dev/console device. The
main problem with the hack is that, after getting the console pointer
to the tty console, it is assumed the pointer is still valid after
releasing the console_sem. This assumption is incorrect and unsafe.
Make the hack safe by introducing a new function
console_force_preferred_locked() and perform the full operation
under the console_list_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-33-john.ogness@linutronix.de
The CON_ENABLED flag is being misused to track whether or not the
extended console should be or has been registered. Instead use
a local variable to decide if the extended console should be
registered and console_is_registered() to determine if it has
been registered.
Also add a check in cleanup_netconsole() to only unregister the
extended console if it has been registered.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-32-john.ogness@linutronix.de
It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-31-john.ogness@linutronix.de
It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-30-john.ogness@linutronix.de
It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-29-john.ogness@linutronix.de
It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-28-john.ogness@linutronix.de
It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-27-john.ogness@linutronix.de
It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-26-john.ogness@linutronix.de
The CON_ENABLED status of a console is a runtime setting that does not
involve the console driver. Drivers must not assume that if the console
is disabled then proper hardware management is not needed. For the EFI
earlycon case, it is about remapping/unmapping memory for the
framebuffer.
Use console_is_registered() instead of checking CON_ENABLED.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-25-john.ogness@linutronix.de
Currently CON_ENABLED is being (mis)used to identify if the console
has been registered. This is not reliable because it can be set even
though registration failed or it can be unset, even though the console
is registered. Use console_is_registered() instead.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-24-john.ogness@linutronix.de
All users of uart_console_enabled() really want to know if a console
is registered. It is not reliable to check for CON_ENABLED in order
to identify if a console is registered. Use console_is_registered()
instead.
A _locked() variant is provided because uart_set_options() is always
called with the console_list_lock held and must check if a console
is registered in order to synchronize with kgdboc.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-23-john.ogness@linutronix.de
Currently it is not possible for drivers to detect if they have
already successfully registered their console. Several drivers
have multiple paths that lead to console registration. To avoid
attempting a 2nd registration (which leads to a WARN), drivers
are implementing their own solution.
Introduce console_is_registered() so drivers can easily identify
if their console is currently registered. A _locked() variant
is also provided if the caller is already holding the
console_list_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-22-john.ogness@linutronix.de
Use srcu console list iteration for console list traversal. It is
acceptable because the consoles might come and go at any time.
Strict synchronizing with console registration code would not bring
any advantage over srcu.
Document why the console_lock is still necessary. Note that this
is a preparatory change for when console_lock no longer provides
synchronization for the console list.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-21-john.ogness@linutronix.de
With SRCU it is now safe to traverse the console list, even if
the console_trylock() failed. However, overwriting console->seq
when console_trylock() failed is still an issue.
Switch to SRCU iteration and document remaining issue with
console->seq.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-20-john.ogness@linutronix.de
Use srcu console list iteration for console list traversal.
Document why the console_lock is still necessary. Note that this
is a preparatory change for when console_lock no longer provides
synchronization for the console list.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-19-john.ogness@linutronix.de
All users of console_is_usable() are SRCU iterators. Use the
appropriate wrapper function to locklessly read the flags.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-18-john.ogness@linutronix.de
Use srcu console list iteration for console list traversal.
Document why the console_lock is still necessary. Note that this
is a preparatory change for when console_lock no longer provides
synchronization for the console list.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-17-john.ogness@linutronix.de
Guarantee safe iteration of the console list by using SRCU.
Note that in the case of a handover, the SRCU read lock is also
released. This is documented in the function description and as
comments in the code. It is a bit tricky, but this preserves the
lockdep lock ordering for the context handing over the
console_lock:
console_lock()
| mutex_acquire(&console_lock_dep_map) <-- console lock
|
console_unlock()
| console_flush_all()
| | srcu_read_lock(&console_srcu) <-- srcu lock
| | console_emit_next_record()
| | | console_lock_spinning_disable_and_check()
| | | | srcu_read_unlock(&console_srcu) <-- srcu unlock
| | | | mutex_release(&console_lock_dep_map) <-- console unlock
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-16-john.ogness@linutronix.de
Guarantee safe iteration of the console list by using SRCU.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-15-john.ogness@linutronix.de
Rather than using the console_lock to guarantee safe console list
traversal, use srcu console list iteration.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-14-john.ogness@linutronix.de
After switching to SRCU for console list iteration, some readers
will begin readings console->flags as a data race. Locklessly
reading console->flags provides a consistent value because there
is at most one CPU modifying console->flags and that CPU is
using only read-modify-write operations.
Introduce a wrapper for SRCU iterators to read console flags.
Introduce a matching wrapper to write to flags of registered
consoles. Writing to flags of registered consoles is synchronized
by the console_list_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-13-john.ogness@linutronix.de
Currently there exist races in register_console(), where the types
of registered consoles are checked (without holding the console_lock)
and then after acquiring the console_lock, it is assumed that the list
has not changed. Also, some code that performs console_unregister()
make similar assumptions.
It might be possible to fix these races using the console_lock. But
it would require a complex analysis of all console drivers to make
sure that the console_lock is not taken in match() and setup()
callbacks. And we really prefer to split up and reduce the
responsibilities of console_lock rather than expand its complexity.
Therefore, introduce a new console_list_lock to provide full
synchronization for any console list changes.
In addition, also use console_list_lock for synchronization of
console->flags updates. All flags are either static or modified only
during the console registration. There are only two exceptions.
The first exception is CON_ENABLED, which is also modified by
console_start()/console_stop(). Therefore, these functions must
also take the console_list_lock.
The second exception is when the flags are modified by the console
driver init code before the console is registered. These will be
ignored because they are not visible to the rest of the system
via the console_drivers list.
Note that one of the various responsibilities of the console_lock is
also intended to provide console list and console->flags
synchronization. Later changes will update call sites relying on the
console_lock for these purposes. Once all call sites have been
updated, the console_lock will be relieved of synchronizing
console_list and console->flags updates.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87sficwokr.fsf@jogness.linutronix.de
The console_lock is held throughout the start/show/stop procedure
to print out device/driver information about all registered
consoles. Since the console_lock is being used for multiple reasons,
explicitly document these reasons. This will be useful when the
console_lock is split into fine-grained locking.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-11-john.ogness@linutronix.de
show_cons_active() uses the console_lock to gather information
on registered consoles. Since the console_lock is being used for
multiple reasons, explicitly document these reasons. This will
be useful when the console_lock is split into fine-grained
locking.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-10-john.ogness@linutronix.de
kgdboc_earlycon_init() uses the console_lock to ensure that no consoles
are unregistered until the kgdboc_earlycon is setup. This is necessary
because the trapping of the exit() callback assumes that the exit()
callback is not called before the trap is setup.
Explicitly document this non-typical console_lock usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-9-john.ogness@linutronix.de
The initial intention of the UML kmsg_dumper is to dump the kernel
buffers to stdout if there is no console available to perform the
regular crash output.
However, if ttynull was registered as a console, no crash output was
seen. Commit e23fe90dec ("um: kmsg_dumper: always dump when not tty
console") tried to fix this by performing the kmsg_dump unless the
stdio console was behind /dev/console or enabled. But this allowed
kmsg dumping to occur even if other non-stdio consoles will output
the crash output. Also, a console being the driver behind
/dev/console has nothing to do with a crash scenario.
Restore the initial intention by dumping the kernel buffers to stdout
only if a non-ttynull console is registered and enabled. Also add
detailed comments so that it is clear why these rules are applied.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-8-john.ogness@linutronix.de
It used to be that all consoles were synchronized with respect to
which message they were printing. After commit a699449bb1 ("printk:
refactor and rework printing logic"), all consoles have their own
@seq for tracking which message they are on. That commit also changed
how the initial sequence number was chosen. Instead of choosing the
next non-printed message, it chose the sequence number of the next
message that will be added to the ringbuffer.
That change created a possibility that a non-boot console taking over
for a boot console might skip messages if the boot console was behind
and did not have a chance to catch up before being unregistered.
Since it is not known which boot console is the same device, flush
all consoles and, if necessary, start with the message of the enabled
boot console that is the furthest behind. If no boot consoles are
enabled, begin with the next message that will be added to the
ringbuffer.
Also, since boot consoles are meant to be used at boot time, handle
them the same as CON_PRINTBUFFER to ensure that no initial messages
are skipped.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-7-john.ogness@linutronix.de
The code to initialize @seq for a new console needs to consider
more factors when choosing an initial value. Move the code into
a helper function console_init_seq() "as is" so this code can
be expanded without causing register_console() to become too
long. A later commit will implement the additional code.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-6-john.ogness@linutronix.de
The @bootcon_enabled and @realcon_enabled local variables actually
represent if such console types are registered. In general there
has been a confusion about enabled vs. registered. Incorrectly
naming such variables promotes such confusion.
Rename the variables to _registered.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-5-john.ogness@linutronix.de
Provide an NMI-safe SRCU protected variant to walk the console list.
Note that all console fields are now set before adding the console
to the list to avoid the console becoming visible by SCRU readers
before being fully initialized.
This is a preparatory change for a new console infrastructure which
operates independent of the console BKL.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-4-john.ogness@linutronix.de
Replace the open coded single linked list with a hlist so a conversion
to SRCU protected list walks can reuse the existing primitives.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-3-john.ogness@linutronix.de
Unprotected list walks are not necessarily safe.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-2-john.ogness@linutronix.de
This commit adds lockdep checks for illegal use of synchronize_srcu()
within same-type SRCU read-side critical sections and within normal
RCU read-side critical sections. It also makes synchronize_srcu()
be a no-op during early boot.
These changes bring Tiny synchronize_srcu() into line with both Tree
synchronize_srcu() and Tiny synchronize_rcu().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: John Ogness <john.ogness@linutronix.de>
Kernels configured with CONFIG_PRINTK=n and CONFIG_SRCU=n get build
failures. This causes trouble for deep embedded systems. But given
that there are more than 25 instances of "select SRCU" in the kernel,
it is hard to believe that there are many kernels running in production
without SRCU. This commit therefore makes SRCU mandatory. The SRCU
Kconfig option remains for backwards compatibility, and will be removed
when it is no longer used.
[ paulmck: Update per kernel test robot feedback. ]
Reported-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Provide an implementation for debug_lockdep_rcu_enabled() when
CONFIG_DEBUG_LOCK_ALLOC is not enabled. This allows code to check
if rcu lockdep debugging is available without needing an extra
check if CONFIG_DEBUG_LOCK_ALLOC is enabled.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently the NMI safety debugging is only performed on architectures
that don't support NMI-safe this_cpu_inc().
Reorder the code so that other architectures like x86 also detect bad
uses.
[ paulmck: Apply kernel test robot, Stephen Rothwell, and Zqiang feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tell about the need to protect against concurrent updaters who may
overflow the GP counter behind the current update.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Using the NMI-unsafe reader API from within an NMI handler is very likely
to be buggy for three reasons:
1) NMIs aren't strictly re-entrant (a pending nested NMI will execute at
the end of the current one) so it should be fine to use a non-atomic
increment here. However, breakpoints can still interrupt NMIs and if
a breakpoint callback has a reader on that same ssp, a racy increment
can happen.
2) If the only reader site for a given srcu_struct structure is in an
NMI handler, then RCU should be used instead of SRCU.
3) Because of the previous reason (2), an srcu_struct structure having
an SRCU read side critical section in an NMI handler is likely to
have another one from a task context.
For all these reasons, warn if an NMI-unsafe reader API is used from an
NMI handler.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The s390 architecture uses either a cmpxchg loop (old systems)
or the laa add-to-memory instruction (new systems) to implement
this_cpu_add(), both of which are NMI safe. This means that the old
and more-efficient srcu_read_lock() may be used in NMI context, without
the need for srcu_read_lock_nmisafe(). Therefore, add the new Kconfig
option ARCH_HAS_NMI_SAFE_THIS_CPU_OPS to arch/s390/Kconfig, which will
cause NEED_SRCU_NMI_SAFE to be deselected, thus preserving the current
srcu_read_lock() behavior.
[ paulmck: Apply Christian Borntraeger feedback. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <linux-s390@vger.kernel.org>
The loongarch architecture uses the atomic read-modify-write
amadd instruction to implement this_cpu_add(), which is NMI safe.
This means that the old and more-efficient srcu_read_lock() may be
used in NMI context, without the need for srcu_read_lock_nmisafe().
Therefore, add the new Kconfig option ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
to arch/loongarch/Kconfig, which will cause NEED_SRCU_NMI_SAFE to be
deselected, thus preserving the current srcu_read_lock() behavior.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <loongarch@lists.linux.dev>
The arm64 architecture uses either an LL/SC loop (old systems) or an LSE
stadd instruction (new systems) to implement this_cpu_add(), both of which
are NMI safe. This means that the old and more-efficient srcu_read_lock()
may be used in NMI context, without the need for srcu_read_lock_nmisafe().
Therefore, add the new Kconfig option ARCH_HAS_NMI_SAFE_THIS_CPU_OPS to
arch/arm64/Kconfig, which will cause NEED_SRCU_NMI_SAFE to be deselected,
thus preserving the current srcu_read_lock() behavior.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <linux-arm-kernel@lists.infradead.org>
The x86 architecture uses an add-to-memory instruction to implement
this_cpu_add(), which is NMI safe. This means that the old and
more-efficient srcu_read_lock() may be used in NMI context, without
the need for srcu_read_lock_nmisafe(). Therefore, add the new Kconfig
option ARCH_HAS_NMI_SAFE_THIS_CPU_OPS to arch/x86/Kconfig, which will
cause NEED_SRCU_NMI_SAFE to be deselected, thus preserving the current
srcu_read_lock() behavior.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <x86@kernel.org>
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives globally, but based
on the per-CPU data. These global checks are made by the grace-period
code that must scan the srcu_data structures anyway, and are done only
in kernels built with CONFIG_PROVE_RCU=y.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives on a per-CPU basis.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
On strict load-store architectures, the use of this_cpu_inc() by
srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU.
To see this suppose that an NMI arrives in the middle of srcu_read_lock(),
just after it has read ->srcu_lock_count, but before it has written
the incremented value back to memory. If that NMI handler also does
srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure,
then upon return from that NMI handler, the interrupted srcu_read_lock()
will overwrite the NMI handler's update to ->srcu_lock_count, but
leave unchanged the NMI handler's update by srcu_read_unlock() to
->srcu_unlock_count.
This can result in a too-short SRCU grace period, which can in turn
result in arbitrary memory corruption.
If the NMI handler instead interrupts the srcu_read_unlock(), this
can result in eternal SRCU grace periods, which is not much better.
This commit therefore creates a pair of new srcu_read_lock_nmisafe()
and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in
both NMI handlers and in process and IRQ context. It is bad practice
to mix the existing and the new _nmisafe() primitives on the same
srcu_struct structure. Use one set or the other, not both.
Just to underline that "bad practice" point, using srcu_read_lock() at
process level and srcu_read_lock_nmisafe() in your NMI handler will not,
repeat NOT, work. If you do not immediately understand why this is the
case, please review the earlier paragraphs in this commit log.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Randy Dunlap. ]
[ paulmck: Apply feedback from John Ogness. ]
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
NMI-safe variants of srcu_read_lock() and srcu_read_unlock() are needed
by printk(), which on many architectures entails read-modify-write
atomic operations. This commit prepares Tree SRCU for this change by
making both ->srcu_lock_count and ->srcu_unlock_count by atomic_long_t.
[ paulmck: Apply feedback from John Ogness. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmNHYD0ACgkQSfxwEqXe
A655AA//dJK0PdRghqrKQsl18GOCffV5TUw5i1VbJQbI9d8anfxNjVUQiNGZi4et
qUwZ8OqVXxYx1Z1UDgUE39PjEDSG9/cCvOpMUWqN20/+6955WlNZjwA7Fk6zjvlM
R30fz5CIJns9RFvGT4SwKqbVLXIMvfg/wDENUN+8sxt36+VD2gGol7J2JJdngEhM
lW+zqzi0ABqYy5so4TU2kixpKmpC08rqFvQbD1GPid+50+JsOiIqftDErt9Eg1Mg
MqYivoFCvbAlxxxRh3+UHBd7ZpJLtp1UFEOl2Rf00OXO+ZclLCAQAsTczucIWK9M
8LCZjb7d4lPJv9RpXFAl3R1xvfc+Uy2ga5KeXvufZtc5G3aMUKPuIU7k28ZyblVS
XXsXEYhjTSd0tgi3d0JlValrIreSuj0z2QGT5pVcC9utuAqAqRIlosiPmgPlzXjr
Us4jXaUhOIPKI+Musv/fqrxsTQziT0jgVA3Njlt4cuAGm/EeUbLUkMWwKXjZLTsv
vDsBhEQFmyZqxWu4pYo534VX2mQWTaKRV1SUVVhQEHm57b00EAiZohoOvweB09SR
4KiJapikoopmW4oAUFotUXUL1PM6yi+MXguTuc1SEYuLz/tCFtK8DJVwNpfnWZpE
lZKvXyJnHq2Sgod/hEZq58PMvT6aNzTzSg7YzZy+VabxQGOO5mc=
=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support
for using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as
well as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF
in 'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this option
to the or expression expected in the intercepted perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the 'perf
annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus being
ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY0vyXAAKCRCyPKLppCJ+
J3EgAQDgr9FhTCTG+u46iGqPG4lxc46ZWKB3MgZwPuX6P2jwLwD9GCwGow4qHQVP
F/m7S/3tK/ShPfPWB2m4nVHd9xp7uwM=
=F1IB
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for
the combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
-----BEGIN PGP SIGNATURE-----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=EZAr
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
