Add the module clocks used by the Pin Function Controller (PFC) and
General Purpose Input/Output (GPIO) blocks on the Renesas R-Car V4M
(R8A779H0) SoC.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/a7d8f4111b87decb825db5ed310de8294f90b9f9.1706266196.git.geert+renesas@glider.be
R-Car V4H and V4M have a second Frequency Control Register C.
Add support for this by treating bit field offsets beyond 31 as
referring to the second register.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f64d5573a92a18505619ff0ff808d50cfc2bde55.1706194617.git.geert+renesas@glider.be
Add CRU clock and reset entries to CPG driver.
CRU_SYSCLK and CRU_VCLK clocks need to be turned ON/OFF in particular
sequence for the CRU block hence add these clocks to
r9a07g043_no_pm_mod_clks[] array and pass it as part of CPG data for
RZ/G2UL SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240123114415.290918-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/G3S has a watchdog module accessible by the Cortex-A core. Add clock
and reset support for it.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240122111115.2861835-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
After the DT conversion of SH-Mobile and Armadillo-800-EVA display
support, all devices are registered from DT, so we can remove the
registration of clkdevs.
Add the missing #include <linux/slab.h>, which was included implicitly
through <linux/clkdev.h> before.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e98a6e47ebecc44fa41de6d88b4ed20c6efbd177.1705931322.git.geert+renesas@glider.be
Some boards might use Linux and another OS at the same time. In such
case, currently, during booting, Linux will stop necessary module clocks
which are not used on the Linux side, but are used by another OS.
To avoid such situation, renesas-cpg-mssr tries to find
status = "reserved" devices (A), and adds CLK_IGNORE_UNUSED flag to its
<&cgp CPG_MOD xxx> clock (B).
Table 2.4: Values for status property
https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf
"reserved"
Indicates that the device is operational, but should not be
used. Typically this is used for devices that are controlled
by another software component, such as platform firmware.
ex)
scif5: serial@e6f30000 {
...
(B) clocks = <&cpg CPG_MOD 202>,
<&cpg CPG_CORE R8A7795_CLK_S3D1>,
<&scif_clk>;
...
(A) status = "reserved";
};
Cc: Aymeric Aillet <aymeric.aillet@iot.bzh>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/878r4ygfap.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h.
of_device.h isn't needed, but mod_devicetable.h and platform_device.h
were implicitly included.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231211160510.0aef871b@canb.auug.org.au
[robh: Redo commit msg]
Signed-off-by: Rob Herring <robh@kernel.org>
SM8650 based on the diffstat. Otherwise this is a collection of non-critical
fixes and cleanups to various clk drivers and their DT bindings. Nothing is
changed in the core clk framework this time, although there's a patch to fix a
basic clk type initialization function. In general, this pile looks to be on
the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling separate
memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and
QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers
-----BEGIN PGP SIGNATURE-----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=t0CI
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
A new drivers/cache/ subsystem is added to contain drivers for abstracting
cache flush methods on riscv and potentially others, as this is needed for
handling non-coherent DMA but several SoCs require nonstandard hardware
methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195,
and driver support for MT8188 along with some code refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon
-----BEGIN PGP SIGNATURE-----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=4bKY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
* clk-rs9:
clk: rs9: Add support for 9FGV0841
clk: rs9: Replace model check with bitshift from chip data
clk: rs9: Limit check to vendor ID in VID register
dt-bindings: clk: rs9: Add 9FGV0841
Add APMIXED, ETH, INFRACFG and TOPCKGEN clock drivers which are
typical MediaTek designs.
Also add driver for XFIPLL clock generating the 156.25MHz clock for
the XFI SerDes. It needs an undocumented software workaround and has
an unknown internal design.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/c7574d808e2da1a530182f0fd790c1337c336e1b.1702849494.git.daniel@makrotopia.org
[sboyd@kernel.org: Add module license to infracfg file]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Introduce pcw_chg_bit member to struct mtk_pll_data and use it instead
of the previously hardcoded PCW_CHG_MASK macro if set.
This will needed for clocks on the MT7988 SoC.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/3b9c65ddb08c8bedf790aacf29871af026b6f0b7.1702849494.git.daniel@makrotopia.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
- top_edp was set to TVDPLL1, outputting X GHz
- top_dp was set to TVDPLL2, outputting Y GHz
- mtk_dpi calls clk_set_rate(top_edp, Z GHz)
- top_dp is switched to TVDPLL1
- TVDPLL1 changes its rate, top_edp outputs the wrong rate.
- eDP display is garbled
To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-4-angelogioacchino.delregno@collabora.com
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The top_dp and top_edp muxes can be both parented to either TVDPLL1
or TVDPLL2, two identically specced PLLs for the specific purpose of
giving out pixel clock: this becomes a problem when the MediaTek
DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
In the usecase of two simultaneous outputs (using two controllers),
it was seen that one of the displays would sometimes display garbled
output (if any at all) and this was because:
- top_edp was set to TVDPLL1, outputting X GHz
- top_dp was set to TVDPLL2, outputting Y GHz
- mtk_dpi calls clk_set_rate(top_edp, Z GHz)
- top_dp is switched to TVDPLL1
- TVDPLL1 changes its rate, top_edp outputs the wrong rate.
- eDP display is garbled
To solve this issue, remove all TVDPLL1 parents from `top_dp` and
all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
able to use the right bit index for the new parents list.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-3-angelogioacchino.delregno@collabora.com
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for customized parent indices for MediaTek muxes: this is
necessary for the case in which we want to exclude some clocks from
a mux's parent clocks list, where the exclusions are not from the
very bottom of the list but either in the middle or the beginning.
Example:
- MUX1 (all parents)
- parent1; idx=0
- parent2; idx=1
- parent3; idx=2
- MUX1 (wanted parents)
- parent1; idx=0
- parent3; idx=2
To achieve that add a `parent_index` array pointer to struct mtk_mux,
then in .set_parent(), .get_parent() callbacks check if this array
was populated and eventually get the index from that.
Also, to avoid updating all clock drivers for all SoCs, rename the
"main" macro to __GATE_CLR_SET_UPD_FLAGS (so, `__` was added) and
add the new member to it; furthermore, GATE_CLK_SET_UPD_FLAGS has
been reintroduced as being fully compatible with the older version.
The new parent_index can be specified with the new `_INDEXED`
variants of the MUX_GATE_CLR_SET_UPD_xxxx macros.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103102533.69280-2-angelogioacchino.delregno@collabora.com
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This is needed by the dwmac-starfive ethernet driver to set the clock
for 1000, 100 and 10 Mbps links properly.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231219232442.2460166-3-cristian.ciocaltea@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This flag is needed to add the CLK_SET_RATE_PARENT flag on the gmac_tx
clock on the JH7100, which in turn is needed by the dwmac-starfive
driver to set the clock properly for 1000, 100 and 10 Mbps links.
This change was mostly made using coccinelle:
@ match @
expression idx, name, nparents;
@@
JH71X0__MUX(
-idx, name, nparents,
+idx, name, 0, nparents,
...)
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231219232442.2460166-2-cristian.ciocaltea@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
pll14xx_calc_rate() output the fout clock not the fvco clock
The relation of fvco and fout is:
fout = fvco / (1 << sdiv)
So use correct naming for the clock.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/1703068389-6130-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
To be compatible with SCU firmware based on 1.15 a different clock
routing for LVDS is needed.
Signed-off-by: Oliver F. Brown <oliver.brown@oss.nxp.com>
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231218122407.2757175-1-alexander.stein@ew.tq-group.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
In cases where imx_clk_is_resource_owned() returns false, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'clk_node' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/all/20231210171907.3410922-1-visitorckw@gmail.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
To ensure that all fields (particularly CAL_L and CAL_L_RINGOSC) are
filled properly, use the correct prepare function for OLE PLLs.
Fixes: 90114ca114 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-9-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The settings in the driver seem to have been taken from an older
release. Update them to match the latest values.
Fixes: 90114ca114 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-8-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The settings in the driver seem to have been taken from an older
release. Update them to match the latest values.
Fixes: bfae40744b ("clk: qcom: gpucc-sm8550: Add support for graphics clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-7-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe GDSCs can be shared with other masters and should use the APCS
collapse-vote register when updating the power state.
This is specifically also needed to be able to disable power domains
that have been enabled by boot firmware using the vote register.
Following other recent Qualcomm platforms, describe this register and
the corresponding mask for the PCIe (and _phy) GDSCs.
Fixes: 955f2ea3b9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-5-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe GDSCs on most Qualcomm platforms expect the OS to always
consider collapse requests as successful. This also concerns SM8550.
Add the VOTABLE flag to the GDSCs in question to comply with these
expectations.
Fixes: 955f2ea3b9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-4-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All of the 8550's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.
Fixes: 955f2ea3b9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-3-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The gs101 clock defines from the bindings header are derived from the
clock register names found in the datasheet under some certain rules.
The CMU TOP gate clock defines missed to include the required "CMU"
differentiator which will cause collisions with the gate clock defines
of other clock units. Rename the TOP gate clock defines to include "CMU".
Update the clock driver to use the new defines in order to not break
compilation and bisect-ability. There are no device trees that use the
previous defines.
Fixes: 0a910f1606 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231218064333.479885-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Introduce a new PLL reset mode flag which controls whether or not to
reset a PLL after adjusting its rate. The mode can be configured through
platform data or device tree.
Since commit 6dc669a22c ("clk: si5351: Add PLL soft reset"), the
driver unconditionally resets a PLL whenever its rate is adjusted.
The rationale was that a PLL reset was required to get three outputs
working at the same time. Before this change, the driver never reset the
PLLs.
Commit b26ff127c5 ("clk: si5351: Apply PLL soft reset before enabling
the outputs") subsequently introduced an option to reset the PLL when
enabling a clock output that sourced it. Here, the rationale was that
this is required to get a deterministic phase relationship between
multiple output clocks.
This clearly shows that it is useful to reset the PLLs in applications
where multiple clock outputs are used. However, the Si5351 also allows
for glitch-free rate adjustment of its PLLs if one avoids resetting the
PLL. In our audio application where a single Si5351 clock output is used
to supply a runtime adjustable bit clock, this unconditional PLL reset
behaviour introduces unwanted glitches in the clock output.
It would appear that the problem being solved in the former commit
may be solved by using the optional device tree property introduced in
the latter commit, obviating the need for an unconditional PLL reset
after rate adjustment. But it's not OK to break the default behaviour of
the driver, and it cannot be assumed that all device trees are using the
property introduced in the latter commit. Hence, the new behaviour is
made opt-in.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Jacob Siverskog <jacob@teenage.engineering>
Cc: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-3-69b82311cb90@bang-olufsen.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
regmap_bulk_write() return zero or negative error code, return the value
of regmap_bulk_write() rather than '0'.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231101031633.996124-1-suhui@nfschina.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Drop ret variable from vc3_clk_mux_determine_rate().
While at it, return the value returned by regmap_*
wherever possible instead of returning 0.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-6-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add missing space between ')' and '{' for hw.init initialization.
While at it, update the macro VC3_PLL1_LOOP_FILTER_N_DIV_MSB
0x0a->0xa.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-5-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The return type of get_parent() member in struct clk_ops is u8.
Use same return type for corresponding callback function as well.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-4-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Update vc3_get_div() to avoid divide by zero operation on
vc3_div_round_rate() by returning1, if there is no table match
found.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20231122142310.203169-2-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This model is similar to 9FGV0441, the DIFx bits start at bit 0 again,
except this chip has 8 outputs.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Adjust rs9_calc_dif() to special-case the 9FGV0241 where DIFx bits
start at 1, encode this shift into chip data and drop the model
check entirely.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Extract only vendor ID from VID register, the top 4 bits are
revision ID which are not useful for the vendor ID check.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for Clocking Wizard for Versal adaptive compute
acceleration platforms. The Versal clocking wizard differs
in the programming model and the register layout.
The CLKFBOUT_1 registers are at offset of 0x200
instead of the 0x330 in Versal. In Versal clocking wizard the low and
high time is programmed instead of the divisor.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20231214105125.26919-3-shubhrajyoti.datta@amd.com
[sboyd@kernel.org: Stop initializing spinlock flags]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
