Commit Graph

127 Commits

Author SHA1 Message Date
Liangliang Huang
c9b0299034 MIPS: Use fallthrough for arch/mips
Convert the various /* fallthrough */ comments to the pseudo-keyword
fallthrough;

Done via script:
https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/

Signed-off-by: Liangliang Huang <huangll@lemote.com>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-07 11:55:47 +02:00
Jiaxun Yang
ece276de2a
MIPS: Add MAC2008 Support
MAC2008 means the processor implemented IEEE754 style Fused MADD
instruction. It was introduced in Release3 but removed in Release5.

The toolchain support of MAC2008 have never landed except for Loongson
processors.

This patch aimed to disabled the MAC2008 if it's optional. For
MAC2008 only processors, we corrected math-emu behavior to align
with actual hardware behavior.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[paulburton@kernel.org: Fixup MIPSr2-r5 check in cpu_set_fpu_2008.]
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com
Cc: paul.burton@mips.com
Cc: linux-kernel@vger.kernel.org
2020-01-22 15:56:08 -08:00
Thomas Gleixner
9d5a634946 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 397
Based on 1 normalized pattern(s):

  this program is free software you can distribute it and or modify it
  under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope it will be useful but without any warranty
  without even the implied warranty of merchantability or fitness for
  a particular purpose see the gnu general public license for more
  details you should have received a copy of the gnu general public
  license along with this program if not write to the free software
  foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 33 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.563233189@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:12 +02:00
Linus Torvalds
96d4f267e4 Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00
Paul Burton
1975ed43ce
MIPS: Ensure emulated FP sets PF_USED_MATH
Emulated floating point instructions don't ensure that the PF_USED_MATH
flag is set for the task. This results in a couple of inconsistencies:

  - ptrace will return the default initial state of FP registers rather
    than the values actually stored in struct thread_struct, hiding
    state that has been updated by emulated floating point instructions.

  - If a task migrates to a CPU with an FPU after having emulated
    floating point instructions then its floating point register state
    will be reset to the default ~0 bit pattern, losing state from the
    emulated instructions.

Fix this by calling init_fp_ctx() from fpu_emulator_cop1Handler() to
consistently initialize FP state if it was previously uninitialized,
setting the PF_USED_MATH flag in the process.

All callers of fpu_emulator_cop1Handler() either call lose_fpu(1) before
it in order to save any live FPU registers to struct thread_struct, or
in the case of do_cpu() already know that the task does not own an FPU
so lose_fpu(1) would be a no-op. Since we know that saving FP context
will be unnecessary in the case where FP context was just initialized we
move this call into fpu_emulator_cop1Handler() too, providing
consistency & avoiding needless duplication.

Calls to own_fpu(1) are common after return from
fpu_emulator_cop1Handler() too, but this would not be a no-op in the
do_cpu() case so these are left as-is. A potential future improvement
could be to have fpu_emulator_cop1Handler() restore FPU state
automatically only if it saved it, though this may not be optimal if
some callers are better off without their current calls to own_fpu(1).
One potential example of this could be mipsr2_decoder() which as-is
could end up saving & restoring FP context repeatedly & unnecessarily if
emulating multiple FP instructions.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21003/
Cc: linux-mips@linux-mips.org
2018-11-09 10:23:14 -08:00
Aleksandar Markovic
2a14b21acd MIPS: math-emu: Mark fall throughs in switch statements with a comment
Mark intentional fall throughs in switch statements with a consistent
comment.

In most of the cases, a new comment line containing text "fall through"
is inserted. In some of the cases, existing comment contained a variation
of the text "fall through" (for example, "FALL THROUGH" or "drop through").
In such cases, the existing comment is modified to contain "fall through".
Lastly, in two cases, code segments were described in comments as "fall
througs", but were in reality "breaks out" of switch statement. In such
cases, existing comments are accordingly modified.

Apart from making code easier to follow and debug, this change enables
some static code analysers to interpret newly inserted comments as their
annotations (and, therefore, not issue warnings of type "fall through in
switch statement", which is desireable, since marked fallthroughs are
intentional).

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17588/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-12-12 17:20:20 +01:00
Aleksandar Markovic
61100500a1 MIPS: math-emu: Avoid multiple assignment
Replace several instances of multiple assignment with individual
assignments.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17587/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-12-12 17:20:20 +01:00
Aleksandar Markovic
8904d5b1a3 MIPS: math-emu: Avoid an assignment within if statement condition
Move invocation of fpu_emu() to be out of if statement condition.

This makes code easier to follow and debug, and fixes a checkpatch
warning.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17586/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-12-12 17:20:20 +01:00
Linus Torvalds
892204e06c MIPS changes for 4.15
These are the main MIPS changes for 4.15.
 
 Fixes:
 - ralink: Fix MT7620 PCI build issues (4.5)
 - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
   (4.1)
 - Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
 - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
 - ralink: Fix MT7628 pinmux (3.19)
 - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
 - Fix n32 core dumping as o32 since regset support (3.13)
 - ralink: Drop obsolete USB_ARCH_HAS_HCD select
 
 Build system:
 - Default to "generic" (multiplatform) system type instead of IP22
 - Use generic little endian MIPS32 r2 configuration as default defconfig
   instead of ip22_defconfig
 
 FPU emulation:
 - Fix exception generation for certain R6 FPU instructions
 
 SMP:
 - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
   spaces
 
 Miscellaneous:
 - Add iomem resource for kernel bss section for kexec/kdump
 - Atomics: Nudge writes on bit unlock
 - DT files: Standardise "ok" -> "okay"
 
 Platform support:
 
  BMIPS:
  - Enable HARDIRQS_SW_RESEND
 
  Broadcom BCM63XX:
  - Add clkdev lookup support
  - Update clk driver, UART driver, DTs to handle named refclk from DTs
  - Split apart various clocks to more closely match hardware
  - Add ethernet clocks
 
  Cavium Octeon:
  - Remove usage of cvmx_wait() in favour of __delay()
 
  ImgTec Pistachio:
  - DT: Drop deprecated dwmmc num-slots property
 
  Ingenic JZ4780:
  - Add NFS root to Ci20 defconfig
  - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
    driver with this SoC
 
  Generic (multiplatform):
  - Migrate xilfpga (MIPSfpga) platform to the generic platform
 
  Lantiq xway:
  - Fix ASC0/ASC1 clocks
 
 Minor cleanups:
 - Define virt_to_pfn()
 - Make thread_saved_pc static
 - Simplify 32-bit sign extension in __read_64bit_c0_split()
 - DMA: Use vma_pages() helper
 - FPU emulation: Replace unsigned with unsigned int
 - MM: Removed unused lastpfn
 - Alchemy: Make clk_ops const
 - Lasat: Use setup_timer() helper
 - ralink: Use BIT() in MT7620 PCI driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAloJ8ecACgkQbAtpk944
 dnqF3w/+IPcxcYl7QpVFvM3MsDgxJI8ENIkY5ffMi1UVM8gApAHuFSnGotikS8C8
 jjnFyorrOkUKuuX9m9pfwfmvMHAy8j77so7kp2vpGjihe4iFntYJxJYUpYq8Ru8M
 jNzikrPbFv6eQyjwFEGuqxrJmsgTlJGiWA04a33LCfiFz5RZUSloHfPkjWiyWM1s
 xrbkbZpwvyX3jw39vguZvz5qjuUPViy/YOSyMhmTqnqDXqGmwlHgzev1/HEzISVe
 eN5n6bHGX5Dis4bCBPZuYbr6m96/z+xTKCKC7mlH0OnG/WWQtv9LFFU7o+ffRsI/
 nPKEN/TFFA7V0b9zI/lxfVSoZ67IZa5TDA+PLnzX9UQAxOA/wgFHPOgqJZN3/BXo
 OBgTuguwq9D22uSrvrMoqmcU+zDXG4ZQQCgv7mUUw2E9gHnsYJykhVa4kQVj9MxE
 LkixhhE+Qabsh6L3wDtBntpgoOd58dxNiMJ7UAzDW3rmyjo+EEWN1eeCxQCrewlf
 1aJaHeRoEOt/k7oPZWCd1InJ3vEsrNcO74KSZuQ+q0ytuqYOLUZ7ZXteA86VzroI
 4qcftvR4cVOCz86B6NZdQQVOM95P7vgqBMJqh52i1pjQlVdvE92MBgzbm4BSOUAL
 Y+hybhhIwJriF8WtTq2goL8osvMODM1uM3Zlm0XtA5JfUYbWK/E=
 =xbL0
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.15.

  Fixes:
   - ralink: Fix MT7620 PCI build issues (4.5)
   - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
     (4.1)
   - Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
   - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
   - ralink: Fix MT7628 pinmux (3.19)
   - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
   - Fix n32 core dumping as o32 since regset support (3.13)
   - ralink: Drop obsolete USB_ARCH_HAS_HCD select

  Build system:
   - Default to "generic" (multiplatform) system type instead of IP22
   - Use generic little endian MIPS32 r2 configuration as default
     defconfig instead of ip22_defconfig

  FPU emulation:
   - Fix exception generation for certain R6 FPU instructions

  SMP:
   - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
     spaces

  Miscellaneous:
   - Add iomem resource for kernel bss section for kexec/kdump
   - Atomics: Nudge writes on bit unlock
   - DT files: Standardise "ok" -> "okay"

  Minor cleanups:
   - Define virt_to_pfn()
   - Make thread_saved_pc static
   - Simplify 32-bit sign extension in __read_64bit_c0_split()
   - DMA: Use vma_pages() helper
   - FPU emulation: Replace unsigned with unsigned int
   - MM: Removed unused lastpfn
   - Alchemy: Make clk_ops const
   - Lasat: Use setup_timer() helper
   - ralink: Use BIT() in MT7620 PCI driver

  Platform support:

  BMIPS:
  - Enable HARDIRQS_SW_RESEND

  Broadcom BCM63XX:
  - Add clkdev lookup support
  - Update clk driver, UART driver, DTs to handle named refclk from DTs
  - Split apart various clocks to more closely match hardware
  - Add ethernet clocks

  Cavium Octeon:
  - Remove usage of cvmx_wait() in favour of __delay()

  ImgTec Pistachio:
  - DT: Drop deprecated dwmmc num-slots property

  Ingenic JZ4780:
  - Add NFS root to Ci20 defconfig
  - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
    driver with this SoC

  Generic (multiplatform):
  - Migrate xilfpga (MIPSfpga) platform to the generic platform

  Lantiq xway:
  - Fix ASC0/ASC1 clocks"

* tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits)
  MIPS: Add iomem resource for kernel bss section.
  MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP
  MIPS: BMIPS: Enable HARDIRQS_SW_RESEND
  MIPS: pci: Make use of the BIT() macro inside the mt7620 driver
  MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver
  MIPS: pci: Remove duplicate define in mt7620 driver
  MIPS: ralink: Fix typo in mt7628 pinmux function
  MIPS: ralink: Fix MT7628 pinmux
  MIPS: Fix odd fp register warnings with MIPS64r2
  watchdog: jz4780: Allow selection of jz4740-wdt driver
  MIPS/ptrace: Update syscall nr on register changes
  MIPS/ptrace: Pick up ptrace/seccomp changed syscalls
  MIPS: Fix an n32 core file generation regset support regression
  MIPS: Fix MIPS64 FP save/restore on 32-bit kernels
  MIPS: page.h: Define virt_to_pfn()
  MIPS: Xilfpga: Switch to using generic defconfigs
  MIPS: generic: Add support for MIPSfpga
  MIPS: Set defconfig target to a generic system for 32r2el
  MIPS: Kconfig: Set default MIPS system type as generic
  MIPS: DTS: Remove num-slots from Pistachio SoC
  ...
2017-11-15 11:36:08 -08:00
Aleksandar Markovic
a58f85b5d5 MIPS: math-emu: Use preferred flavor of unsigned integer declarations
Fix occurences of unsigned integer variable declarations that are
not preferred by standards of checkpatch scripts. This removes a
significant number of checkpatch warnings for files in math-emu
directory (several files become completely warning-free), and thus
makes easier to spot (now and in the future) other, perhaps more
significant, checkpatch errors and warnings.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17582/
Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07 18:33:16 +00:00
Aleksandar Markovic
409fcace99 MIPS: math-emu: Fix final emulation phase for certain instructions
Fix final phase of <CLASS|MADDF|MSUBF|MAX|MIN|MAXA|MINA>.<D|S>
emulation. Provide proper generation of SIGFPE signal and updating
debugfs FP exception stats in cases of any exception flags set in
preceding phases of emulation.

CLASS.<D|S> instruction may generate "Unimplemented Operation" FP
exception. <MADDF|MSUBF>.<D|S> instructions may generate "Inexact",
"Unimplemented Operation", "Invalid Operation", "Overflow", and
"Underflow" FP exceptions. <MAX|MIN|MAXA|MINA>.<D|S> instructions
can generate "Unimplemented Operation" and "Invalid Operation" FP
exceptions.

The proper final processing of the cases when any FP exception
flag is set is achieved by replacing "break" statement with "goto
copcsr" statement. With such solution, this patch brings the final
phase of emulation of the above instructions consistent with the
one corresponding to the previously implemented emulation of other
related FPU instructions (ADD, SUB, etc.).

Fixes: 38db37ba06 ("MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction")
Fixes: e24c3bec3e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Fixes: a79f5f9ba5 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.3+
Patchwork: https://patchwork.linux-mips.org/patch/17581/
Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07 18:33:15 +00:00
Paul Burton
ca8eb05b5f MIPS: math-emu: Remove pr_err() calls from fpu_emu()
The FPU emulator includes 2 calls to pr_err() which are triggered by
invalid instruction encodings for MIPSr6 cmp.cond.fmt instructions.
These cases are not kernel errors, merely invalid instructions which are
already handled by delivering a SIGILL which will provide notification
that something failed in cases where that makes sense.

In cases where that SIGILL is somewhat expected & being handled, for
example when crashme happens to generate one of the affected bad
encodings, the message is printed with no useful context about what
triggered it & spams the kernel log for no good reason.

Remove the pr_err() calls to make crashme run silently & treat the bad
encodings the same way we do others, with a SIGILL & no further kernel
log output.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: f8c3c6717a ("MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction")
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.3+
Patchwork: https://patchwork.linux-mips.org/patch/17253/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-10-09 16:33:34 +02:00
Aleksandar Markovic
454854ace2 MIPS: math-emu: Add FP emu debugfs stats for individual instructions
Add FP emulation debugfs statistics for individual instructions. The
debugfs files that contain counter values are placed in a separate
directory called "instructions". This means that the default path for
these new stat is "/sys/kernel/debug/mips/fpuemustats/instructions".

Each instruction counter is mapped to the debugfs file that has the
same name as instruction name. The lowercase is choosen as more
commonly used case for instruction names.

One example of usage:

mips_host::/sys/kernel/debug/mips/fpuemustats/instructions # grep "" *

The shortened output of this command is:

abs.d:34
abs.s:5711
add.d:10401
add.s:399307
bc1eqz:3199
...
...
...
sub.s:167211
trunc.l.d:375
trunc.l.s:8054
trunc.w.d:421
trunc.w.s:27032

The limitation of this patch is that it handles R6 FP emulation
instructions only. There are altogether 114 handled instructions.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17145/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29 15:21:57 +02:00
Aleksandar Markovic
ae5f3f5b81 MIPS: math-emu: Add FP emu debugfs statistics for branches
Add FP emu debugfs counter for branches.

The new counter is displayed the same way as existing counter, and
its default path is /sys/kernel/debug/mips/fpuemustats/.

The limitation of this counter is that it counts only R6 branch
instructions BC1NEZ and BC1EQZ.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17143/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29 15:21:57 +02:00
Aleksandar Markovic
e1231dd6b1 MIPS: math-emu: CLASS.D: Zero bits 32-63 of the result
Fix content of CLASS.D output bits 32-63 to match hardware behavior.

Prior to this patch, bits 32-63 of CLASS.D output were not
initialized, causing different 32-63 bits content of CLASS.D, based on
circumstances. However, the hardware consistently returns all these
bits zeroed. The documentation is not clear whether these bits should
be zero or unpredictable. Since technically "all zero" case still can
be viewed as belonging to "unpredictable" class of results, it is
better to zero bits 32-63.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17142/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29 15:21:56 +02:00
Aleksandar Markovic
3ec404d88c MIPS: math-emu: RINT.<D|S>: Fix several problems by reimplementation
Reimplement RINT.<D|S> kernel emulation so that all RINT.<D|S>
specifications are met.

For the sake of simplicity, let's analyze RINT.S only. Prior to
this patch, RINT.S emulation was essentially implemented as (in
pseudocode) <output> = ieee754sp_flong(ieee754sp_tlong(<input>)),
where ieee754sp_tlong() and ieee754sp_flong() are functions
providing conversion from double to integer, and from integer
to double, respectively. On surface, this implementation looks
correct, but actually fails in many cases. Following problems
were detected:

1. NaN and infinity cases will not be handled properly. The
   function ieee754sp_flong() never returns NaN nor infinity.
2. For RINT.S, for all inputs larger than LONG_MAX, and smaller
   than FLT_MAX, the result will be wrong, and the overflow
   exception will be erroneously set. A similar problem for
   negative inputs exists as well.
3. For some rounding modes, for some negative inputs close to zero,
   the return value will be zero, and should be -zero. This is
   because ieee754sp_flong() never returns -zero.

This patch removes the problems above by implementing dedicated
functions for RINT.<D|S> emulation.

The core of the new function functionality is adapted version of
the core of the function ieee754sp_tlong(). However, there are many
details that are implemented to match RINT.<D|S> specification. It
should be said that the functionality of ieee754sp_tlong() actually
closely corresponds to CVT.L.S instruction, and it is used while
emulating CVT.L.S. However, RINT.S and CVT.L.S instructions differ
in many aspects. This patch fulfills missing support for RINT.<D|S>.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17141/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29 15:21:56 +02:00
Aleksandar Markovic
1ff8560ac9 MIPS: math-emu: CMP.Sxxx.<D|S>: Prevent occurrences of SIGILL crashes
Fix CMP.Sxxx.<D|S> SIGILL crashes by fixing main switch/case statement
in fpu_emul() function so that inadvertent fall-troughs are prevented.

Consider, let's say, CMP.SAF.S instruction when one of inputs is zero
and another input is a signaling NaN. The desired output is zero, and
the exception flag "invalid operation" set. For such case, the main
portion of the implementation is within "d_fmt" case of the main
"switch/case" statement in fpu_emul() function. The execution will
follow one of "if-else" branches that doesn't contain "goto cop1scr;"
statement, and will therefore reach the end of "d_fmt" case. It will
subsequently fall through to the next case, "l_fmt". After following
similar pattern, the execution will fall through to the succeeding
case, which is "default". The "default" case contains "return SIGILL;"
statement only. This means that the caller application will crash
with "illegal instruction" message.

It is obvious that above described fall-throughs are unnecessary and
harmful. This patch rectifies that behavior by providing "break;"
statements at the end of cases "d_fmt" and "l_fmt".

There are 22 instructions affected by this problem:

CMP.<SAF|SEQ|SLE|SLT|SNE|SOR|SUEQ|SULE|SULT|SUN|SUNE>.<D|S>.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17140/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29 15:21:56 +02:00
Paul Burton
445a58ce34 MIPS: math-emu: Correct user fault_addr type
The fault_addr argument to fpu_emulator_cop1Handler(), fpux_emu() and
cop1Emulate() has up until now been declared as:

  void *__user *fault_addr

This is essentially a pointer in user memory which points to a pointer
to void. This is not the intent for our code, which is actually
operating on a pointer to a pointer to void where the pointer to void is
pointing at user memory. ie. the pointer is in kernel memory & points to
user memory.

This mismatch produces a lot of sparse warnings that look like this:

arch/mips/math-emu/cp1emu.c:1485:45:
   warning: incorrect type in assignment (different address spaces)
      expected void *[noderef] <asn:1><noident>
      got unsigned int [noderef] [usertype] <asn:1>*[assigned] va

Fix these by modifying the declaration of the fault_addr argument to:

  void __user **fault_addr

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17173/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29 15:21:55 +02:00
Manuel Lauss
8535f2ba0a MIPS: math-emu: do not use bools for arithmetic
GCC-7 complains about a boolean value being used with an arithmetic
AND:

arch/mips/math-emu/cp1emu.c: In function 'cop1Emulate':
arch/mips/math-emu/cp1emu.c:838:14: warning: '~' on a boolean expression [-Wbool-operation]
  fpr = (x) & ~(cop1_64bit(xcp) == 0);    \
              ^
arch/mips/math-emu/cp1emu.c:1068:3: note: in expansion of macro 'DITOREG'
   DITOREG(dval, MIPSInst_RT(ir));
   ^~~~~~~
arch/mips/math-emu/cp1emu.c:838:14: note: did you mean to use logical not?
  fpr = (x) & ~(cop1_64bit(xcp) == 0);    \

Since cop1_64bit() returns and int, just flip the LSB.

Suggested-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17058/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29 15:21:53 +02:00
Maciej W. Rozycki
70f743d141 MIPS: math-emu: For MFHC1/MTHC1 also return SIGILL right away
Update commit 1ac944007b ("MIPS: math-emu: Add mfhc1 & mthc1
support.") and like done throughout `cop1Emulate' for other cases also
for the MFHC1 and MTHC1 instructions return SIGILL right away rather
than jumping to a single `return' statement.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16401/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-29 02:42:27 +02:00
Maciej W. Rozycki
13769ebad0 MIPS: math-emu: Prevent wrong ISA mode instruction emulation
Terminate FPU emulation immediately whenever an ISA mode switch has been
observed.  This is so that we do not interpret machine code in the wrong
mode, for example when a regular MIPS FPU instruction has been placed in
a delay slot of a jump that switches into the MIPS16 mode, as with the
following code (taken from a GCC test suite case):

00400650 <set_fast_math>:
  400650:	3c020100 	lui	v0,0x100
  400654:	03e00008 	jr	ra
  400658:	44c2f800 	ctc1	v0,c1_fcsr
  40065c:	00000000 	nop

[...]

004012d0 <__libc_csu_init>:
  4012d0:	f000 6a02 	li	v0,2
  4012d4:	f150 0b1c 	la	v1,3f9430 <_DYNAMIC-0x6df0>
  4012d8:	f400 3240 	sll	v0,16
  4012dc:	e269      	addu	v0,v1
  4012de:	659a      	move	gp,v0
  4012e0:	f00c 64f6 	save	a0-a2,48,ra,s0-s1
  4012e4:	673c      	move	s1,gp
  4012e6:	f010 9978 	lw	v1,-32744(s1)
  4012ea:	d204      	sw	v0,16(sp)
  4012ec:	eb40      	jalr	v1
  4012ee:	653b      	move	t9,v1
  4012f0:	f010 997c 	lw	v1,-32740(s1)
  4012f4:	f030 9920 	lw	s1,-32736(s1)
  4012f8:	e32f      	subu	v1,s1
  4012fa:	326b      	sra	v0,v1,2
  4012fc:	d206      	sw	v0,24(sp)
  4012fe:	220c      	beqz	v0,401318 <__libc_csu_init+0x48>
  401300:	6800      	li	s0,0
  401302:	99e0      	lw	a3,0(s1)
  401304:	4801      	addiu	s0,1
  401306:	960e      	lw	a2,56(sp)
  401308:	4904      	addiu	s1,4
  40130a:	950d      	lw	a1,52(sp)
  40130c:	940c      	lw	a0,48(sp)
  40130e:	ef40      	jalr	a3
  401310:	653f      	move	t9,a3
  401312:	9206      	lw	v0,24(sp)
  401314:	ea0a      	cmp	v0,s0
  401316:	61f5      	btnez	401302 <__libc_csu_init+0x32>
  401318:	6476      	restore	48,ra,s0-s1
  40131a:	e8a0      	jrc	ra

Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit)
and emulation triggers for the CTC1 instruction.  As it is in a jump
delay slot emulation continues from `401312' (`401313' with the ISA
bit).  However we have no path to handle MIPS16 FPU code emulation,
because there are no MIPS16 FPU instructions.  So the default emulation
path is taken, interpreting a 32-bit word fetched by `get_user' from
`401313' as a regular MIPS instruction, which is:

  401313:	f5ea0a92	sdc1	$f10,2706(t7)

This makes the FPU emulator proceed with the supposed SDC1 instruction
and consequently makes the program considered here terminate with
SIGSEGV.

A similar although less severe issue exists with pure-microMIPS
processors in the case where similarly an FPU instruction is emulated in
a delay slot of a register jump that (incorrectly) switches into the
regular MIPS mode.  A subsequent instruction fetch from the jump's
target is supposed to cause an Address Error exception, however instead
we proceed with regular MIPS FPU emulation.

For simplicity then, always terminate the emulation loop whenever a mode
change is detected, denoted by an ISA mode bit flip.  As from commit
377cb1b6c1 ("MIPS: Disable MIPS16/microMIPS crap for platforms not
supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded
to 0, so we need to examine the ISA mode bit by hand.

This complements commit 102cedc32a ("MIPS: microMIPS: Floating point
support.") which added JALX decoding to FPU emulation.

Fixes: 102cedc32a ("MIPS: microMIPS: Floating point support.")
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/16393/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-29 02:42:26 +02:00
Douglas Leung
8bcd84a4a3 MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling
Correct the treatment of branching conditions for BC1EQZ and BC1NEZ
instructions in function isBranchInstr().

Previously, corresponding conditions were swapped, which in turn meant
that, for these two instructions, function isBranchInstr() returned
wrong value in its output parameter contpc.

This change is actually an extension of the fix done by the commit
93583e178e ("MIPS: math-emu: Fix BC1{EQ,NE}Z emulation"). That commit
dealt with a similar problem in function cop1Emulate(), while this
commit deals with condition handling in function isBranchInstr().
The code styles of changes in these two commits are kept as
consistent as possible.

Signed-off-by: Douglas Leung <douglas.leung@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: james.hogan@imgtec.com
Cc: leonid.yegoshin@imgtec.com
Cc: petar.jovanovic@imgtec.com
Cc: goran.ferenc@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15489/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-10 11:56:09 +02:00
Linus Torvalds
7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Masahiro Yamada
97139d4a6f treewide: remove redundant #include <linux/kconfig.h>
Kernel source files need not include <linux/kconfig.h> explicitly
because the top Makefile forces to include it with:

  -include $(srctree)/include/linux/kconfig.h

This commit removes explicit includes except the following:

  * arch/s390/include/asm/facilities_src.h
  * tools/testing/radix-tree/linux/kernel.h

These two are used for host programs.

Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Linus Torvalds
4305f42401 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.8.  Also includes is a
  minor SSB cleanup as SSB code traditionally is merged through the MIPS
  tree:

  ATH25:
    - MIPS: Add default configuration for ath25

  Boot:
    - For zboot, copy appended dtb to the end of the kernel
    - store the appended dtb address in a variable

  BPF:
    - Fix off by one error in offset allocation

  Cobalt code:
    - Fix typos

  Core code:
    - debugfs_create_file returns NULL on error, so don't use IS_ERR for
      testing for errors.
    - Fix double locking issue in RM7000 S-cache code.  This would only
      affect RM7000 ARC systems on reboot.
    - Fix page table corruption on THP permission changes.
    - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
      David says, there are no compatibility issues raised by this fix.
    - Move some signal code around.
    - Rewrite r4k count/compare clockevent device registration such that
      min_delta_ticks/max_delta_ticks files are guaranteed to be
      initialized.
    - Only register r4k count/compare as clockevent device if we can
      assume the clock to be constant.
    - Fix MSA asm warnings in control reg accessors
    - uasm and tlbex fixes and tweaking.
    - Print segment physical address when EU=1.
    - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
    - CP: Allow booting by VP other than VP 0
    - Cache handling fixes and optimizations for r4k class caches
    - Add hotplug support for R6 processors
    - Cleanup hotplug bits in kconfig
    - traps: return correct si code for accessing nonmapped addresses
    - Remove cpu_has_safe_index_cacheops

  Lantiq:
    - Register IRQ handler for virtual IRQ number
    - Fix EIU interrupt loading code
    - Use the real EXIN count
    - Fix build error.

  Loongson 3:
    - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES

  Octeon:
    - Delete built-in DTB pruning code for D-Link DSR-1000N.
    - Clean up GPIO definitions in dlink_dsr-1000n.dts.
    - Add more LEDs to the DSR-100n DTS
    - Fix off by one in octeon_irq_gpio_map()
    - Typo fixes
    - Enable SATA by default in cavium_octeon_defconfig
    - Support readq/writeq()
    - Remove forced mappings of USB interrupts.
    - Ensure DMA descriptors are always in the low 4GB
    - Improve USB reset code for OCTEON II.

  Pistachio:
    - Add maintainers entry for pistachio SoC Support
    - Remove plat_setup_iocoherency

  Ralink:
    - Fix pwm UART in spis group pinmux.

  SSB:
    - Change bare unsigned to unsigned int to suit coding style

  Tools:
    - Fix reloc tool compiler warnings.

  Other:
    - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
  MIPS: mm: Fix definition of R6 cache instruction
  MIPS: tools: Fix relocs tool compiler warnings
  MIPS: Cobalt: Fix typo
  MIPS: Octeon: Fix typo
  MIPS: Lantiq: Fix build failure
  MIPS: Use CPHYSADDR to implement mips32 __pa
  MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
  MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
  MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
  MIPS: store the appended dtb address in a variable
  MIPS: ZBOOT: copy appended dtb to the end of the kernel
  MIPS: ralink: fix spis group pinmux
  MIPS: Factor o32 specific code into signal_o32.c
  MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
  MIPS: Use per-mm page to execute branch delay slot instructions
  MIPS: Modify error handling
  MIPS: c-r4k: Use SMP calls for CM indexed cache ops
  MIPS: c-r4k: Avoid small flush_icache_range SMP calls
  MIPS: c-r4k: Local flush_icache_range cache op override
  MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
  ...
2016-08-06 09:13:11 -04:00
Masahiro Yamada
97f2645f35 tree-wide: replace config_enabled() with IS_ENABLED()
The use of config_enabled() against config options is ambiguous.  In
practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the
author might have used it for the meaning of IS_ENABLED().  Using
IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc.  makes the intention
clearer.

This commit replaces config_enabled() with IS_ENABLED() where possible.
This commit is only touching bool config options.

I noticed two cases where config_enabled() is used against a tristate
option:

 - config_enabled(CONFIG_HWMON)
  [ drivers/net/wireless/ath/ath10k/thermal.c ]

 - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE)
  [ drivers/gpu/drm/gma500/opregion.c ]

I did not touch them because they should be converted to IS_BUILTIN()
in order to keep the logic, but I was not sure it was the authors'
intention.

Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will Drewry <wad@chromium.org>
Cc: Nikolay Martynov <mar.kolya@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tony Wu <tung7970@gmail.com>
Cc: Huaitong Han <huaitong.han@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Paul Burton
432c6bacbd MIPS: Use per-mm page to execute branch delay slot instructions
In some cases the kernel needs to execute an instruction from the delay
slot of an emulated branch instruction. These cases include:

  - Emulated floating point branch instructions (bc1[ft]l?) for systems
    which don't include an FPU, or upon which the kernel is run with the
    "nofpu" parameter.

  - MIPSr6 systems running binaries targeting older revisions of the
    architecture, which may include branch instructions whose encodings
    are no longer valid in MIPSr6.

Executing instructions from such delay slots is done by writing the
instruction to memory followed by a trap, as part of an "emuframe", and
executing it. This avoids the requirement of an emulator for the entire
MIPS instruction set. Prior to this patch such emuframes are written to
the user stack and executed from there.

This patch moves FP branch delay emuframes off of the user stack and
into a per-mm page. Allocating a page per-mm leaves userland with access
to only what it had access to previously, and compared to other
solutions is relatively simple.

When a thread requires a delay slot emulation, it is allocated a frame.
A thread may only have one frame allocated at any one time, since it may
only ever be executing one instruction at any one time. In order to
ensure that we can free up allocated frame later, its index is recorded
in struct thread_struct. In the typical case, after executing the delay
slot instruction we'll execute a break instruction with the BRK_MEMU
code. This traps back to the kernel & leads to a call to do_dsemulret
which frees the allocated frame & moves the user PC back to the
instruction that would have executed following the emulated branch.
In some cases the delay slot instruction may be invalid, such as a
branch, or may trigger an exception. In these cases the BRK_MEMU break
instruction will not be hit. In order to ensure that frames are freed
this patch introduces dsemul_thread_cleanup() and calls it to free any
allocated frame upon thread exit. If the instruction generated an
exception & leads to a signal being delivered to the thread, or indeed
if a signal simply happens to be delivered to the thread whilst it is
executing from the struct emuframe, then we need to take care to exit
the frame appropriately. This is done by either rolling back the user PC
to the branch or advancing it to the continuation PC prior to signal
delivery, using dsemul_thread_rollback(). If this were not done then a
sigreturn would return to the struct emuframe, and if that frame had
meanwhile been used in response to an emulated branch instruction within
the signal handler then we would execute the wrong user code.

Whilst a user could theoretically place something like a compact branch
to self in a delay slot and cause their thread to become stuck in an
infinite loop with the frame never being deallocated, this would:

  - Only affect the users single process.

  - Be architecturally invalid since there would be a branch in the
    delay slot, which is forbidden.

  - Be extremely unlikely to happen by mistake, and provide a program
    with no more ability to harm the system than a simple infinite loop
    would.

If a thread requires a delay slot emulation & no frame is available to
it (ie. the process has enough other threads that all frames are
currently in use) then the thread joins a waitqueue. It will sleep until
a frame is freed by another thread in the process.

Since we now know whether a thread has an allocated frame due to our
tracking of its index, the cookie field of struct emuframe is removed as
we can be more certain whether we have a valid frame. Since a thread may
only ever have a single frame at any given time, the epc field of struct
emuframe is also removed & the PC to continue from is instead stored in
struct thread_struct. Together these changes simplify & shrink struct
emuframe somewhat, allowing twice as many frames to fit into the page
allocated for them.

The primary benefit of this patch is that we are now free to mark the
user stack non-executable where that is possible.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Maciej Rozycki <maciej.rozycki@imgtec.com>
Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13764/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-02 09:28:53 +02:00
Paul Burton
1b49260006 MIPS: inst.h: Rename cbcond{0,1}_op to pop{1,3}0_op
The opcodes currently defined in inst.h as cbcond0_op & cbcond1_op are
actually defined in the MIPS base instruction set manuals as pop10 &
pop30 respectively. Rename them as such, for consistency with the
documentation.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-05 16:09:07 +02:00
Paul Burton
1c66b79bb3 MIPS: inst.h: Rename b{eq,ne}zcji[al]c_op to pop{6,7}6_op
The opcodes currently defined in inst.h as beqzcjic_op & bnezcjialc_op
are actually defined in the MIPS base instruction set manuals as pop66 &
pop76 respectively. Rename them as such, for consistency with the
documentation.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-05 16:08:59 +02:00
Paul Burton
ab4a92e667 MIPS: math-emu: Fix jalr emulation when rd == $0
When emulating a jalr instruction with rd == $0, the code in
isBranchInstr was incorrectly writing to GPR $0 which should actually
always remain zeroed. This would lead to any further instructions
emulated which use $0 operating on a bogus value until the task is next
context switched, at which point the value of $0 in the task context
would be restored to the correct zero by a store in SAVE_SOME. Fix this
by not writing to rd if it is $0.

Fixes: 102cedc32a ("MIPS: microMIPS: Floating point support.")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable <stable@vger.kernel.org> # v3.10
Patchwork: https://patchwork.linux-mips.org/patch/13160/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13 14:02:24 +02:00
Paul Burton
4b820d95dc MIPS: math-emu: Emulate MIPSr6 sel.fmt instruction
Add support for emulating the MIPSr6 sel.fmt instruction, which was
previously missing from the FPU emulation code. This instruction selects
its result from 2 possible source registers, based upon bit 0 of the
destination register, and is valid only for S (single) & D (double) data
types.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13153/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13 14:02:22 +02:00
Paul Burton
93583e178e MIPS: math-emu: Fix BC1{EQ,NE}Z emulation
The conditions for branching when emulating the BC1EQZ & BC1NEZ
instructions were backwards, leading to each of those instructions being
treated as the other. Fix this by reversing the conditions, and clear up
the code a little for readability & checkpatch.

Fixes: c909ca718e ("MIPS: math-emu: Emulate missing BC1{EQ,NE}Z instructions")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13150/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13 14:02:21 +02:00
Maciej W. Rozycki
e4553573b3 MIPS: math-emu: Correctly handle NOP emulation
Fix an issue introduced with commit 9ab4471c9f ("MIPS: math-emu:
Correct delay-slot exception propagation") where the emulation of a NOP
instruction signals the need to terminate the emulation loop.  This in
turn, if the PC has not changed from the entry to the loop, will cause
the kernel to terminate the program with SIGILL.

Consider this program:

static double div(double d)
{
	do
		d /= 2.0;
	while (d > .5);
	return d;
}

int main(int argc, char **argv)
{
	return div(argc);
}

which gets compiled to the following binary code:

00400490 <main>:
  400490:	44840000 	mtc1	a0,$f0
  400494:	3c020040 	lui	v0,0x40
  400498:	d44207f8 	ldc1	$f2,2040(v0)
  40049c:	46800021 	cvt.d.w	$f0,$f0
  4004a0:	46220002 	mul.d	$f0,$f0,$f2
  4004a4:	4620103c 	c.lt.d	$f2,$f0
  4004a8:	4501fffd 	bc1t	4004a0 <main+0x10>
  4004ac:	00000000 	nop
  4004b0:	4620000d 	trunc.w.d	$f0,$f0
  4004b4:	03e00008 	jr	ra
  4004b8:	44020000 	mfc1	v0,$f0
  4004bc:	00000000 	nop

Where the FPU emulator is used, depending on the number of command-line
arguments this code will either run to completion or terminate with
SIGILL.

If no arguments are specified, then BC1T will not be taken, NOP will not
be emulated and code will complete successfully.

If one argument is specified, then BC1T will be taken once and NOP will
be emulated.  At this point the entry PC value will be 0x400498 and the
new PC value, set by `mips_dsemul' will be 0x4004a0, the target of BC1T.
The emulation loop will terminate, but SIGILL will not be issued,
because the PC has changed.  The FPU emulator will be entered again and
on the second execution BC1T will not be taken, NOP will not be emulated
and code will complete successfully.

If two or more arguments are specified, then the first execution of BC1T
will proceed as above.  Upon reentering the FPU emulator the emulation
loop will continue to BC1T, at which point the branch will be taken and
NOP emulated again.  At this point however the entry PC value will be
0x4004a0, the same as the target of BC1T.  This will make the emulator
conclude that execution has not advanced and therefore an unsupported
FPU instruction has been encountered, and SIGILL will be sent to the
process.

Fix the problem by extending the internal API of `mips_dsemul', making
it return -1 if no delay slot emulation frame has been made, the
instruction has been handled and execution of the emulation loop needs
to continue as if nothing happened.  Remove code from `mips_dsemul' to
reproduce steps made by the emulation loop at the conclusion of each
iteration, as those will be reached normally now.  Adjust call sites
accordingly.  Document the API.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12172/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24 01:34:47 +01:00
Markos Chandras
a79f5f9ba5 MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction
MIPS R6 introduced the following instruction:
Scalar Floating-Point Maximum and
Scalar Floating-Point argument with Maximum Absolute Value
MAX.fmt writes the maximum value of the inputs fs and ft to the
destination fd.
MAXA.fmt takes input arguments fs and ft and writes the argument with
the maximum absolute value to the destination fd.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10961/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:14 +02:00
Markos Chandras
4e9561b20e MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction
MIPS R6 introduced the following instruction:
Scalar Floating-Point Minimum and
Scalar Floating-Point argument with Minimum Absolute Value

MIN.fmt writes the minimum value of the inputs fs and ft to the
destination fd.
MINA.fmt takes input arguments fs and ft and writes the argument with
the minimum absolute value to the destination fd.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10960/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:14 +02:00
Markos Chandras
38db37ba06 MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction
MIPS R6 introduced the following instruction:
Stores in fd a bit mask reflecting the floating-point class of the
floating point scalar value fs.

CLASS.fmt: FPR[fd] = class(FPR[fs])

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10959/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:14 +02:00
Markos Chandras
400bd2e413 MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction
MIPS R6 introduced the following instruction:
Floating-Point Round to Integral
Scalar floating-point round to integral floating point value.

RINT.fmt: FPR[fd] = round_int(FPR[fs])

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:14 +02:00
Markos Chandras
83d43305a1 MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction
MIPS R6 introduced the following instruction:
Floating Point Fused Multiply Subtract:
MSUBF.fmt To perform a fused multiply-subtract of FP values.

MSUBF.fmt: FPR[fd] = FPR[fd] - (FPR[fs] x FPR[ft])

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10957/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:13 +02:00
Markos Chandras
e24c3bec3e MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction
MIPS R6 introduced the following instruction:
Floating Point Fused Multiply Add:
MADDF.fmt To perform a fused multiply-add of FP values.

MADDF.fmt: FPR[fd] = FPR[fd] + (FPR[fs] x FPR[ft])

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10956/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:13 +02:00
Markos Chandras
130fe357ee MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction
MIPS R6 introduced the following instruction:
SELNEZ.fmt: FPR[fd]  FPR[ft].bit0 ? FPR[fs] : 0

Add support for emulating the single and double precision
formats of the said instruction.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10955/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:13 +02:00
Markos Chandras
67613f0278 MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction
MIPS R6 introduced the following instruction:
SELEQZ.fmt: FPR[fd]  FPR[ft].bit0 ? 0 : FPR[fs]

Add support for emulating the single and double precision formats
of the said instruction.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10954/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:12 +02:00
Markos Chandras
f8c3c6717a MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction
Add support for emulating the new CMP.condn.fmt R6 instructions and
return SIGILL for the old C.cond.fmt if R2 emulation is not enabled
since it's not supported by R6.

The functionality of the new CMP.condn.fmt is the following one:

If the comparison specified by the condn field of the instruction
is true for the operand values, the result is true; otherwise, the
result is false. If no exception is taken, the result is written into
FPR fd; true is all 1s and false is all 0s repeated the operand width
of fmt. All other bits beyond the operand width fmt are UNPREDICTABLE.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10953/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:12 +02:00
Markos Chandras
c909ca718e MIPS: math-emu: Emulate missing BC1{EQ,NE}Z instructions
Commit c8a34581ec ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions")
added support for emulating the new R6 BC1{EQ,NE}Z branches but it missed
the case where the instruction that caused the exception was not on a DS.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: c8a34581ec ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions")
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10738/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:07:43 +02:00
Markos Chandras
e8f80cc1a6 MIPS: math-emu: Allow m{f,t}hc emulation on MIPS R6
The mfhc/mthc instructions are supported on MIPS R6 so emulate
them if needed.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10737/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:07:43 +02:00
Markos Chandras
bbdd8147b1 MIPS: cp1emu: Fix closing bracket for the d_fmt case
The double format (d_fmt) case uses an opening bracket which then
closes at the end of the word format (w_fmt). This can be rather confusing
so add the closing bracket at the end of the d_fmt case and use another one
for the w_fmt one.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10733/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:07:42 +02:00
Markos Chandras
143fefc8f3 MIPS: Fix erroneous JR emulation for MIPS R6
Commit 5f9f41c474 ("MIPS: kernel: Prepare
the JR instruction for emulation on MIPS R6") added support for
emulating the JR instruction on MIPS R6 cores but that introduced a bug
which could be triggered when hitting a JALR opcode because the code used
the wrong field in the 'r_format' struct to determine the instruction
opcode. This lead to crashes because an emulated JALR instruction was
treated as a JR one when the R6 emulator was turned off.

Fixes: 5f9f41c474 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10583/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 11:11:43 +02:00
Markos Chandras
e9d92d2233 MIPS: Fix branch emulation for BLTC and BGEC instructions
Commits f1b44067c1 ("MIPS: Emulate the
new MIPS R6 B{L,G}T{Z,}{AL,}C instructions") and commit
a8ff66f52d ("MIPS: Emulate the new MIPS
R6 B{L,G}E{Z,}{AL,}C instructions") added support for emulating various
branch compact instructions. However, it missed the case for those which
use the old BLEZL and BGTZL opcodes leading to random crashes when the R6
emulator is disabled. We fix this by ensuring that the 'rt' field is not
zero which is always true for these branch compact instructions.

Fixes: f1b44067c1 ("MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructions")
Fixes: a8ff66f52d ("MIPS: Emulate the new MIPS R6 B{L,G}E{Z,}{AL,}C instructions")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/10582/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 11:10:40 +02:00
Maciej W. Rozycki
03dce59527 MIPS: Fix a preemption issue with thread's FPU defaults
Fix "BUG: using smp_processor_id() in preemptible" reported in accesses
to thread's FPU defaults: the value to initialise FSCR to at program
startup, the FCSR r/w mask and the contents of FIR in full FPU
emulation, removing a regression introduced with 9b26616c [MIPS: Respect
the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR
feature flags for full emulation].

Use `boot_cpu_data' to obtain the data from, following the approach that
`cpu_has_*' macros take and avoiding the call to `smp_processor_id' made
in the reference to `current_cpu_data'.  The contents of FSCR have to be
consistent across processors in an SMP system, the settings there must
not change as a thread is migrated across processors.  And the contents
of FIR are guaranteed to be consistent in FPU emulation, by definition.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Tested-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10030/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-12 23:15:49 +02:00
Maciej W. Rozycki
9b26616c8d MIPS: Respect the ISA level in FCSR handling
Define the central place the default FCSR value is set from, initialised
in `cpu_probe'.  Determine the FCSR mask applied to values written to
the register with CTC1 in the full emulation mode and via ptrace(2),
according to the ISA level of processor hardware or the writability of
bits 31:18 if actual FPU hardware is used.

Software may rely on FCSR bits whose functions our emulator does not
implement, so it should not allow them to be set or software may get
confused.  For ptrace(2) it's just sanity.

[ralf@linux-mips.org: Fixed double inclusion of <asm/current.h>.]

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9711/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08 01:10:37 +02:00
Maciej W. Rozycki
f1f3b7ebac MIPS: math-emu: Define IEEE 754-2008 feature control bits
Define IEEE 754-2008 feature control bits: FIR.HAS2008, FCSR.ABS2008 and
FCSR.NAN2008, and update the `_ieee754_csr' structure accordingly.

For completeness define FIR.UFRP too.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9709/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08 01:10:31 +02:00