Previously only `ident` and generic types were supported in the
`{try_}{pin_}init!` macros. This patch allows arbitrary path fragments,
so for example `Foo::Bar` but also very complex paths such as
`<Foo as Baz>::Bar::<0, i32>`.
Internally this is accomplished by using `path` fragments. Due to some
peculiar declarative macro limitations, we have to "forget" certain
additional parsing information in the token trees. This is achieved by
using the `paste!` proc macro. It does not actually modify the input,
since no `[< >]` will be present in the input, so it just strips the
information held by declarative macros. For example, if a declarative
macro takes `$t:path` as its input, it cannot sensibly propagate this to
a macro that takes `$($p:tt)*` as its input, since the `$t` token will
only be considered one `tt` token for the second macro. If we first pipe
the tokens through `paste!`, then it parses as expected.
Suggested-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230814084602.25699-10-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add two functions `pin_init_array_from_fn` and `init_array_from_fn` that
take a function that generates initializers for `T` from `usize`, the added
functions then return an initializer for `[T; N]` where every element is
initialized by an element returned from the generator function.
Suggested-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230814084602.25699-9-benno.lossin@proton.me
[ Cleaned a couple trivial nits. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the struct update syntax to the init macros, but only for
`..Zeroable::zeroed()`. Adding this at the end of the struct initializer
allows one to omit fields from the initializer, these fields will be
initialized with 0x00 set to every byte. Only types that implement the
`Zeroable` trait can utilize this.
Suggested-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230814084602.25699-8-benno.lossin@proton.me
[ Rebased on `rust-next` and cleaned a few trivial nits. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Previously the init macros would create a local variable with the name
and hygiene of the field that is being initialized to store the value of
the field. This would override any user defined variables. For example:
```
struct Foo {
a: usize,
b: usize,
}
let a = 10;
let foo = init!(Foo{
a: a + 1, // This creates a local variable named `a`.
b: a, // This refers to that variable!
});
let foo = Box::init!(foo)?;
assert_eq!(foo.a, 11);
assert_eq!(foo.b, 11);
```
This patch changes this behavior, so the above code would panic at the
last assertion, since `b` would have value 10.
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230814084602.25699-7-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In the implementation of the init macros there is a `if false` statement
that type checks the initializer to ensure every field is initialized.
Since the next patch has a stack variable to store the struct, the
function might allocate too much memory on debug builds. Putting the
struct into a closure that is never executed ensures that even in debug
builds no stack overflow error is caused. In release builds this was not
a problem since the code was optimized away due to the `if false`.
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230814084602.25699-6-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use hygienic identifiers for the guards instead of the field names. This
makes the init macros feel more like normal struct initializers, since
assigning identifiers with the name of a field does not create
conflicts.
Also change the internals of the guards, no need to make the `forget`
function `unsafe`, since users cannot access the guards anyways. Now the
guards are carried directly on the stack and have no extra `Cell<bool>`
field that marks if they have been forgotten or not, instead they are
just forgotten via `mem::forget`.
Suggested-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230814084602.25699-5-benno.lossin@proton.me
[ Cleaned a few trivial nits. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a derive proc-macro for the `Zeroable` trait. The macro supports
structs where every field implements the `Zeroable` trait. This way
`unsafe` implementations can be avoided.
The macro is split into two parts:
- a proc-macro to parse generics into impl and ty generics,
- a declarative macro that expands to the impl block.
Suggested-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230814084602.25699-4-benno.lossin@proton.me
[ Added `ignore` to the `lib.rs` example and cleaned trivial nit. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This patch allows one to write
```
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
```
Before, this would result in a compile error, because `#[pin_data]`
would generate two functions named `a` for both fields unconditionally.
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230814084602.25699-3-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Merges the implementations of `try_init!` and `try_pin_init!`. These two
macros are very similar, but use different traits. The new macro
`__init_internal!` that is now the implementation for both takes these
traits as parameters.
This change does not affect any users, as no public API has been
changed, but it should simplify maintaining the init macros.
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230814084602.25699-2-benno.lossin@proton.me
[ Cleaned a couple trivial nits. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The behavior of 'rustup override' is not very well known. Add a small
note about what it does, so users have a better understanding of how it
affects their system toolchain (i.e., it does not affect system
toolchain and only sets a directory-specific override).
Signed-off-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20230803060437.12157-3-tmgross@umich.edu
[ Undid the `:` to `::` change. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The source for Rust's 'core' library is needed to build the kernel with
Rust support. This sometimes needs to be obtained by hand when using a
standalone version of 'rustc' not managed by 'rustup'. Currently, the
documentation suggests cloning the 'rust' repository to obtain these
sources, but this is quite slow (on the order of a multiple minutes).
Change this documentation to suggest using the source tarball instead.
The tarball includes only needed files (<5M) and is significantly faster
to download; this is more in line with what 'rustup' does.
Also simplify wording of the relevant section.
Link: https://github.com/Rust-for-Linux/linux/pull/1024
Signed-off-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20230803060437.12157-2-tmgross@umich.edu
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Both `core` and `alloc` have their `cfgs` (such as `no_rc`) missing
in `rust-project.json`.
To remedy this, pass the flags to `generate_rust_analyzer.py` for
them to be added to a dictionary where each key corresponds to
a crate and each value to a list of `cfg`s. The dictionary is then
used to pass the `cfg`s to each crate in the generated file (for
`core` and `alloc` only).
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230804171448.54976-1-yakoyoku@gmail.com
[ Removed `Suggested-by` as discussed in mailing list. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In LLVM 16, anonymous items may return names like `(unnamed union at ..)`
rather than empty names [1], which breaks Rust-enabled builds because
bindgen assumed an empty name instead of detecting them via
`clang_Cursor_isAnonymous` [2]:
$ make rustdoc LLVM=1 CLIPPY=1 -j$(nproc)
RUSTC L rust/core.o
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
BINDGEN rust/uapi/uapi_generated.rs
thread 'main' panicked at '"ftrace_branch_data_union_(anonymous_at__/_/include/linux/compiler_types_h_146_2)" is not a valid Ident', .../proc-macro2-1.0.24/src/fallback.rs:693:9
...
thread 'main' panicked at '"ftrace_branch_data_union_(anonymous_at__/_/include/linux/compiler_types_h_146_2)" is not a valid Ident', .../proc-macro2-1.0.24/src/fallback.rs:693:9
...
This was fixed in bindgen 0.62.0. Therefore, upgrade bindgen to
a more recent version, 0.65.1, to support LLVM 16.
Since bindgen 0.58.0 changed the `--{white,black}list-*` flags to
`--{allow,block}list-*` [3], update them on our side too.
In addition, bindgen 0.61.0 moved its CLI utility into a binary crate
called `bindgen-cli` [4]. Thus update the installation command in the
Quick Start guide.
Moreover, bindgen 0.61.0 changed the default functionality to bind
`size_t` to `usize` [5] and added the `--no-size_t-is-usize` flag
to not bind `size_t` as `usize`. Then bindgen 0.65.0 removed
the `--size_t-is-usize` flag [6]. Thus stop passing the flag to bindgen.
Finally, bindgen 0.61.0 added support for the `noreturn` attribute (in
its different forms) [7]. Thus remove the infinite loop in our Rust
panic handler after calling `BUG()`, since bindgen now correctly
generates a `BUG()` binding that returns `!` instead of `()`.
Link: 19e984ef8f [1]
Link: https://github.com/rust-lang/rust-bindgen/pull/2319 [2]
Link: https://github.com/rust-lang/rust-bindgen/pull/1990 [3]
Link: https://github.com/rust-lang/rust-bindgen/pull/2284 [4]
Link: cc78b6fdb6 [5]
Link: https://github.com/rust-lang/rust-bindgen/pull/2408 [6]
Link: https://github.com/rust-lang/rust-bindgen/issues/2094 [7]
Signed-off-by: Aakash Sen Sharma <aakashsensharma@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1013
Tested-by: Ariel Miculas <amiculas@cisco.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230612194311.24826-1-aakashsensharma@gmail.com
[ Reworded commit message. Mentioned the `bindgen-cli` binary crate
change, linked to it and updated the Quick Start guide. Re-added a
deleted "as" word in a code comment and reflowed comment to respect
the maximum length. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set
the C ABI when using `#[no_mangle]` (or thinking it is implied).
For instance, it would have prevented the issue [2] fixed by commit
c682e4c37d ("rust: kernel: Mark rust_fmt_argument as extern "C"").
error: `#[no_mangle]` set on a function with the default (`Rust`) ABI
--> rust/kernel/print.rs:21:1
|
21 | / unsafe fn rust_fmt_argument(
22 | | buf: *mut c_char,
23 | | end: *mut c_char,
24 | | ptr: *const c_void,
25 | | ) -> *mut c_char {
| |________________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi
= note: requested on the command line with `-D clippy::no-mangle-with-rust-abi`
help: set an ABI
|
21 | unsafe extern "C" fn rust_fmt_argument(
| ++++++++++
help: or explicitly set the default
|
21 | unsafe extern "Rust" fn rust_fmt_argument(
| +++++++++++++
Thus enable it.
In rare cases, we may need to use the Rust ABI even with `#[no_mangle]`
(e.g. one case, before 1.71.0, would have been the `__rust_*`
functions). In those cases, we would need to `#[allow(...)]` the lint,
since using `extern "Rust"` explicitly (as the compiler suggests)
currently gets overwritten by `rustfmt` [3].
Link: https://github.com/rust-lang/rust-clippy/issues/10347 [1]
Link: https://github.com/Rust-for-Linux/linux/pull/967 [2]
Link: https://github.com/rust-lang/rustfmt/issues/5701 [3]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is the second upgrade to the Rust toolchain, from 1.68.2 to 1.71.1
(i.e. the latest).
See the upgrade policy [1] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [2] for details.
# Required changes
For the upgrade, this patch requires the following changes:
- Removal of the `__rust_*` allocator functions, together with
the addition of the `__rust_no_alloc_shim_is_unstable` static.
See [3] for details.
- Some more compiler builtins added due to `<f{32,64}>::midpoint()`
that got added in Rust 1.71 [4].
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://rust-for-linux.com/rust-version-policy [1]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [2]
Link: https://github.com/rust-lang/rust/pull/86844 [3]
Link: https://github.com/rust-lang/rust/pull/92048 [4]
Closes: https://github.com/Rust-for-Linux/linux/issues/68
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20230729220317.416771-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With commit c1177979af ("btf, scripts: Exclude Rust CUs with pahole")
we are now able to use pahole directly to identify Rust compilation
units (CUs) and exclude them from generating BTF debugging information
(when DEBUG_INFO_BTF is enabled).
And if pahole doesn't support the --lang-exclude flag, we can't enable
both RUST and DEBUG_INFO_BTF at the same time.
So, in any case, the script is_rust_module.sh is just redundant and we
can drop it.
NOTE: we may also be able to drop the "Rust loadable module" mark
inside Rust modules, but it seems safer to keep it for now to make sure
we are not breaking any external tool that may potentially rely on it.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/20230704052136.155445-1-andrea.righi@canonical.com
[ Picked the `Reviewed-by`s from the old patch too. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This macro provides a flexible way to concatenated identifiers together
and it allows the resulting identifier to be used to declare new items,
which `concat_idents!` does not allow. It also allows identifiers to be
transformed before concatenated.
The `concat_idents!` example
let x_1 = 42;
let x_2 = concat_idents!(x, _1);
assert!(x_1 == x_2);
can be written with `paste!` macro like this:
let x_1 = 42;
let x_2 = paste!([<x _1>]);
assert!(x_1 == x_2);
However `paste!` macro is more flexible because it can be used to create
a new variable:
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
While this is not possible with `concat_idents!`.
This macro is similar to the `paste!` crate [1], but this is a fresh
implementation to avoid vendoring large amount of code directly. Also, I
have augmented it to provide a way to specify span of the resulting
token, allowing precise control.
For example, this code is broken because the variable is declared inside
the macro, so Rust macro hygiene rules prevents access from the outside:
macro_rules! m {
($id: ident) => {
// The resulting token has hygiene of the macro.
paste!(let [<$id>] = 1;)
}
}
m!(a);
let _ = a;
In this version of `paste!` macro I added a `span` modifier to allow
this:
macro_rules! m {
($id: ident) => {
// The resulting token has hygiene of `$id`.
paste!(let [<$id:span>] = 1;)
}
}
m!(a);
let _ = a;
Link: http://docs.rs/paste/ [1]
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230628171108.1150742-1-gary@garyguo.net
[ Added SPDX license identifier as discussed in the list and fixed typo. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Adds a `PhantomPinned` field to `Opaque<T>`. This removes the last Rust
guarantee: the assumption that the type `T` can be freely moved. This is
not the case for many types from the C side (e.g. if they contain a
`struct list_head`). This change removes the need to add a
`PhantomPinned` field manually to Rust structs that contain C structs
which must not be moved.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230630150216.109789-1-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When combining `UnsafeCell` with `MaybeUninit`, it is idiomatic to use
`UnsafeCell` as the outer type. Intuitively, this is because a
`MaybeUninit<T>` might not contain a `T`, but we always want the effect
of the `UnsafeCell`, even if the inner value is uninitialized.
Now, strictly speaking, this doesn't really make a difference. The
compiler will always apply the `UnsafeCell` effect even if the inner
value is uninitialized. But I think we should follow the convention
here.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230614115328.2825961-1-aliceryhl@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `rust_is_available.sh` script runs for everybody compiling the
kernel, even if not using Rust. Therefore, it is important to ensure
that the script is correct to avoid breaking people's compilation.
In addition, the script needs to be able to handle a set of subtle
cases, including parsing version strings of different tools.
Therefore, maintenance of this script can be greatly eased with
a set of tests.
Thus add a test suite to cover hopefully most of the setups that
the script may encounter in the wild. Extra setups can be easily
added later on if missing.
The script currently covers all the branches of the shell script,
including several ways in which they may be entered.
Python is used for this script, since the script under test
does not depend on Rust, thus hopefully making it easier for others
to use if the need arises.
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-12-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The script already checks for `$RUSTC` and `$BINDGEN` existing
and exiting without failure. However, one may still pass an
unexpected binary that does not output what the later parsing
expects. The script still successfully reports a failure as
expected, but the error is confusing. For instance:
$ RUSTC=true BINDGEN=bindgen CC=clang scripts/rust_is_available.sh
scripts/rust_is_available.sh: 19: arithmetic expression: expecting primary: "100000 * + 100 * + "
***
*** Please see Documentation/rust/quick-start.rst for details
*** on how to set up the Rust support.
***
Thus add an explicit check and a proper message for unexpected
output from the called command.
Similarly, do so for the `libclang` version parsing, too.
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQYk6s11MASRHW6oxtkqF00EJVqhHOP=5rynWt-QDUsXw@mail.gmail.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-11-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The script already checks if `$RUSTC` and `$BINDGEN` exists via
`command`, but the environment variables may point to a
non-executable file, or the programs may fail for some other reason.
While the script successfully exits with a failure as it should,
the error given can be quite confusing depending on the shell and
the behavior of its `command`. For instance, with `dash`:
$ RUSTC=./mm BINDGEN=bindgen CC=clang scripts/rust_is_available.sh
scripts/rust_is_available.sh: 19: arithmetic expression: expecting primary: "100000 * + 100 * + "
Thus detect failure exit codes when calling `$RUSTC` and `$BINDGEN` and
print a better message, in a similar way to what we do when extracting
the `libclang` version found by `bindgen`.
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQYk6s11MASRHW6oxtkqF00EJVqhHOP=5rynWt-QDUsXw@mail.gmail.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to match the version string, `sed` is used in a couple
cases, and `grep` and `head` in a couple others.
Make the script more consistent and easier to understand by
using the same method, `sed`, for all of them.
This makes the version matching also a bit more strict for
the changed cases, since the strings `rustc ` and `bindgen `
will now be required, which should be fine since `rustc`
complains if one attempts to call it with another program
name, and `bindgen` uses a hardcoded string.
In addition, clarify why one of the existing `sed` commands
does not provide an address like the others.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`bindgen`'s output for `libclang`'s version check contains paths, which
in turn may contain strings that look like version numbers [1][2]:
.../6.1.0-dev/.../rust_is_available_bindgen_libclang.h:2:9: warning: clang version 11.1.0 [-W#pragma-messages], err: false
which the script will pick up as the version instead of the latter.
It is also the case that versions may appear after the actual version
(e.g. distribution's version text), which was the reason behind `head` [3]:
.../rust-is-available-bindgen-libclang.h:2:9: warning: clang version 13.0.0 (Fedora 13.0.0-3.fc35) [-W#pragma-messages], err: false
Thus instead ask for a match after the `clang version` string.
Reported-by: Jordan Isaacs <mail@jdisaacs.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/942 [1]
Reported-by: "Ethan D. Twardy" <ethan.twardy@gmail.com>
Closes: https://lore.kernel.org/rust-for-linux/20230528131802.6390-2-ethan.twardy@gmail.com/ [2]
Reported-by: Tiago Lam <tiagolam@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/789 [3]
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Ethan Twardy <ethan.twardy@gmail.com>
Tested-by: Ethan Twardy <ethan.twardy@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sometimes [1] users may attempt to setup the Rust support by
checking what Kbuild does and they end up finding out about
`scripts/rust_is_available.sh`. Inevitably, they run the script
directly, but unless they setup the required variables,
the result of the script is not meaningful.
We could add some defaults to the variables, but that could be
confusing for those that may override the defaults (compared
to their kernel builds), and `$CC` would not be a simple default
in any case.
Therefore, instead, explicitly check whether the expected variables
are set (`$RUSTC`, `$BINDGEN` and `$CC`). If not, print an explanation
about the fact that the script is meant to be called from Kbuild,
since that is the most likely cause for the variables not being set.
Link: https://lore.kernel.org/oe-kbuild-all/Y6r4mXz5NS0+HVXo@zn.tnic/ [1]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`scripts/rust_is_available.sh` calls `bindgen` with a special
header in order to check whether the `libclang` version in use
is suitable.
However, the invocation itself may fail if, for instance, `bindgen`
cannot locate `libclang`. This is fine for Kconfig (since the
script will still fail and therefore disable Rust as it should),
but it is pretty confusing for users of the `rustavailable` target
given the error will be unrelated:
./scripts/rust_is_available.sh: 21: arithmetic expression: expecting primary: "100000 * + 100 * + "
make: *** [Makefile:1816: rustavailable] Error 2
Instead, run the `bindgen` invocation independently in a previous
step, saving its output and return code. If it fails, then show
the user a proper error message. Otherwise, continue as usual
with the saved output.
Since the previous patch we show a reference to the docs, and
the docs now explain how `bindgen` looks for `libclang`,
thus the error message can leverage the documentation, avoiding
duplication here (and making users aware of the setup guide in
the documentation).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/rust-for-linux/CAKwvOdm5JT4wbdQQYuW+RT07rCi6whGBM2iUAyg8A1CmLXG6Nw@mail.gmail.com/
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/934
Reported-by: Alexandru Radovici <msg4alex@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/921
Reported-by: Matthew Leach <dev@mattleach.net>
Closes: https://lore.kernel.org/rust-for-linux/20230507084116.1099067-1-dev@mattleach.net/
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
People trying out the Rust support in the kernel may get
warnings and errors from `scripts/rust_is_available.sh`
from the `rustavailable` target or the build step.
Some of those users may be following the Quick Start guide,
but others may not (likely those getting warnings from
the build step instead of the target).
While the messages are fairly clear on what the problem is,
it may not be clear how to solve the particular issue,
especially for those not aware of the documentation.
We could add all sorts of details on the script for each one,
but it is better to point users to the documentation instead,
where it is easily readable in different formats. It also
avoids duplication.
Thus add a reference to the documentation whenever the script
fails or there is at least a warning.
Reviewed-by: Finn Behrens <fin@nyantec.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
rust_is_available.sh uses cc-version.sh to identify which C compiler is
in use, as scripts/Kconfig.include does. cc-version.sh isn't designed to
be able to handle multiple arguments in one variable, i.e. "ccache clang".
Its invocation in rust_is_available.sh quotes "$CC", which makes
$1 == "ccache clang" instead of the intended $1 == ccache & $2 == clang.
cc-version.sh could also be changed to handle having "ccache clang" as one
argument, but it only has the one consumer upstream, making it simpler to
fix the caller here.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Link: https://github.com/Rust-for-Linux/linux/pull/873
[ Reworded title prefix and reflow line to 75 columns. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The -v option is passed when this script is invoked from Makefile,
but not when invoked from Kconfig.
As you can see in scripts/Kconfig.include, the 'success' macro suppresses
stdout and stderr anyway, so this script does not need to be quiet.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230109061436.3146442-1-masahiroy@kernel.org
[ Reworded prefix to match the others in the patch series. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Alice has been involved with the Rust for Linux project for
almost a year now. She has been primarily working on the
Android Binder Driver [1].
In addition, she has been reviewing patches in the mailing
list for some months and has submitted improvements to the
core Rust support.
She is also part of the core maintainer team for the widely
used library Tokio [2], an asynchronous Rust runtime.
Her expertise with the language will be very useful to have
around in the future if Rust grows within the kernel, thus
add her to the `RUST` entry as reviewer.
Link: https://rust-for-linux.com/android-binder-driver [1]
Link: https://tokio.rs [2]
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20230718054521.1048785-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Adds support for out-of-tree rust modules to use the `rust-analyzer`
make target to generate the rust-project.json file.
The change involves adding an optional parameter `external_src` to the
`generate_rust_analyzer.py` which expects the path to the out-of-tree
module's source directory. When this parameter is passed, I have chosen
not to add the non-core modules (samples and drivers) into the result
since these are not expected to be used in third party modules. Related
changes are also made to the Makefile and rust/Makefile allowing the
`rust-analyzer` target to be used for out-of-tree modules as well.
Link: https://github.com/Rust-for-Linux/linux/pull/914
Link: https://github.com/Rust-for-Linux/rust-out-of-tree-module/pull/2
Signed-off-by: Vinay Varma <varmavinaym@gmail.com>
Link: https://lore.kernel.org/r/20230411091714.130525-1-varmavinaym@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
While there are default impls for these methods, using the respective C
api's is faster. Currently neither the existing nor these new
GlobalAlloc method implementations are actually called. Instead the
__rust_* function defined below the GlobalAlloc impl are used. With
rustc 1.71 these functions will be gone and all allocation calls will go
through the GlobalAlloc implementation.
Link: https://github.com/Rust-for-Linux/linux/issues/68
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
[boqun: add size adjustment for alignment requirement]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230730012905.643822-4-boqun.feng@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This fixes the potential issue that when KernelAllocator is used, the
allocation may be mis-aligned due to SLAB's alignment guarantee.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230730012905.643822-3-boqun.feng@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sort the #include directives of rust/helpers.c alphabetically and add a
comment specifying this. The reason for this is to improve readability
and to be consistent with the other files with a similar approach within
'rust/'.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1003
Signed-off-by: Ariel Miculas <amiculas@cisco.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230426204923.16195-1-amiculas@cisco.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZM+bcQAKCRCRxhvAZXjc
opWnAP9Ik49607Rn3OvFhWiYQp21nJ9NTs4lp5H30gMM3KhOxQEA9YAafIRH3rMs
zYjmEBwf4FCW9XQ4QgmktsW4Y7RqggE=
=DCbd
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup
- Clean up directory iterators and clarify file_needs_f_pos_lock()
* tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: rely on ->iterate_shared to determine f_pos locking
vfs: get rid of old '->iterate' directory operation
proc: fix missing conversion to 'iterate_shared'
open: make RESOLVE_CACHED correctly test for O_TMPFILE
Now that we removed ->iterate we don't need to check for either
->iterate or ->iterate_shared in file_needs_f_pos_lock(). Simply check
for ->iterate_shared instead. This will tell us whether we need to
unconditionally take the lock. Not just does it allow us to avoid
checking f_inode's mode it also actually clearly shows that we're
locking because of readdir.
Signed-off-by: Christian Brauner <brauner@kernel.org>
All users now just use '->iterate_shared()', which only takes the
directory inode lock for reading.
Filesystems that never got convered to shared mode now instead use a
wrapper that drops the lock, re-takes it in write mode, calls the old
function, and then downgrades the lock back to read mode.
This way the VFS layer and other callers no longer need to care about
filesystems that never got converted to the modern era.
The filesystems that use the new wrapper are ceph, coda, exfat, jfs,
ntfs, ocfs2, overlayfs, and vboxsf.
Honestly, several of them look like they really could just iterate their
directories in shared mode and skip the wrapper entirely, but the point
of this change is to not change semantics or fix filesystems that
haven't been fixed in the last 7+ years, but to finally get rid of the
dual iterators.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
I'm looking at the directory handling due to the discussion about f_pos
locking (see commit 797964253d: "file: reinstate f_pos locking
optimization for regular files"), and wanting to clean that up.
And one source of ugliness is how we were supposed to move filesystems
over to the '->iterate_shared()' function that only takes the inode lock
for reading many many years ago, but several filesystems still use the
bad old '->iterate()' that takes the inode lock for exclusive access.
See commit 6192269444 ("introduce a parallel variant of ->iterate()")
that also added some documentation stating
Old method is only used if the new one is absent; eventually it will
be removed. Switch while you still can; the old one won't stay.
and that was back in April 2016. Here we are, many years later, and the
old version is still clearly sadly alive and well.
Now, some of those old style iterators are probably just because the
filesystem may end up having per-inode mutable data that it uses for
iterating a directory, but at least one case is just a mistake.
Al switched over most filesystems to use '->iterate_shared()' back when
it was introduced. In particular, the /proc filesystem was converted as
one of the first ones in commit f50752eaa0 ("switch all procfs
directories ->iterate_shared()").
But then later one new user of '->iterate()' was then re-introduced by
commit 6d9c939dbe ("procfs: add smack subdir to attrs").
And that's clearly not what we wanted, since that new case just uses the
same 'proc_pident_readdir()' and 'proc_pident_lookup()' helper functions
that other /proc pident directories use, and they are most definitely
safe to use with the inode lock held shared.
So just fix it.
This still leaves a fair number of oddball filesystems using the
old-style directory iterator (ceph, coda, exfat, jfs, ntfs, ocfs2,
overlayfs, and vboxsf), but at least we don't have any remaining in the
core filesystems.
I'm going to add a wrapper function that just drops the read-lock and
takes it as a write lock, so that we can clean up the core vfs layer and
make all the ugly 'this filesystem needs exclusive inode locking' be
just filesystem-internal warts.
I just didn't want to make that conversion when we still had a core user
left.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.
Cc: stable@vger.kernel.org # v5.12+
Fixes: 99668f6180 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230806-resolve_cached-o_tmpfile-v1-1-7ba16308465e@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
- Prevent the scsi disk driver from issuing a START STOP UNIT command
for ATA devices during system resume as this causes various issues
reported by multiple users.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZM73RgAKCRDdoc3SxdoY
dng8AP4qmIrU9K95uy7S9Ix8aMJj0HCWvFlBr6Evh8kpyEw7HgD/SHHlvbYg+g8n
lD9/JWRzpHkHl5XM8DqWyKSvi906pgM=
=m3pD
-----END PGP SIGNATURE-----
Merge tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Prevent the scsi disk driver from issuing a START STOP UNIT command
for ATA devices during system resume as this causes various issues
reported by multiple users.
* tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata,scsi: do not issue START STOP UNIT on resume
-----BEGIN PGP SIGNATURE-----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=AY3g
-----END PGP SIGNATURE-----
Merge tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
- Fix DFS interlink problem (different namespace)
* tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix dfs link mount against w2k8
- Fix vmemmap altmap boundary check which could cause memory hotunplug failure.
- Create a dummy stackframe to fix ftrace stack unwind.
- Fix secondary thread bringup for Book3E ELFv2 kernels.
- Use early_ioremap/unmap() in via_calibrate_decr().
Thanks to: Aneesh Kumar K.V, Benjamin Gray, Christophe Leroy, David Hildenbrand,
Naveen N Rao.
-----BEGIN PGP SIGNATURE-----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=a6as
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix vmemmap altmap boundary check which could cause memory hotunplug
failure
- Create a dummy stackframe to fix ftrace stack unwind
- Fix secondary thread bringup for Book3E ELFv2 kernels
- Use early_ioremap/unmap() in via_calibrate_decr()
Thanks to Aneesh Kumar K.V, Benjamin Gray, Christophe Leroy, David
Hildenbrand, and Naveen N Rao.
* tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powermac: Use early_* IO variants in via_calibrate_decr()
powerpc/64e: Fix secondary thread bringup for ELFv2 kernels
powerpc/ftrace: Create a dummy stackframe to fix stack unwind
powerpc/mm/altmap: Fix altmap boundary check
- early fixmap preallocation to fix boot failures on kernel >= 6.4
- remove DMA leftover code in parport_gsc
- drop old comments and code style fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZM3hwQAKCRD3ErUQojoP
Xyp7AP9i7NNVAjyRoTdTUWGWncfrS5bLL+TYWdPjKPfLJh0tPQEAl4zcC+gbTQgV
SgeWecV+CbLcNX+Pmpa5bKHBIg6SBAM=
=A00f
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- early fixmap preallocation to fix boot failures on kernel >= 6.4
- remove DMA leftover code in parport_gsc
- drop old comments and code style fixes
* tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: unaligned: Add required spaces after ','
parport: gsc: remove DMA leftover code
parisc: pci-dma: remove unused and dead EISA code and comment
parisc/mm: preallocate fixmap page tables at init
- Change a usleep() to udelay() to avoid scheduling while atomic
in the Amlogic PLL code
- Revert a patch to the Mediatek MT8183 driver that caused an
out-of-bounds write
- Return the right error value when devm_of_iomap() fails in
imx93_clocks_probe()
- Constrain the Kconfig for the fixed mmio clk so that it depends on
HAS_IOMEM and can't be compiled on architectures such as s390
-----BEGIN PGP SIGNATURE-----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=eROl
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for some SoC clk drivers:
- Change a usleep() to udelay() to avoid scheduling while atomic in
the Amlogic PLL code
- Revert a patch to the Mediatek MT8183 driver that caused an
out-of-bounds write
- Return the right error value when devm_of_iomap() fails in
imx93_clocks_probe()
- Constrain the Kconfig for the fixed mmio clk so that it depends on
HAS_IOMEM and can't be compiled on architectures such as s390"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM
clk: imx93: Propagate correct error in imx93_clocks_probe()
clk: mediatek: mt8183: Add back SSPM related clocks
clk: meson: change usleep_range() to udelay() for atomic context
