We have one outstanding issue with the stmmac driver, which may
be a LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = "10gbase-r" in the device tree
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T2ty
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
Tasmiya reports that their compiler complains that we deref
a pointer to unknown type with rcu_dereference_rtnl():
include/linux/rcupdate.h:439:9: error: dereferencing pointer to incomplete type ‘struct dpll_pin’
Unclear what compiler it is, at the moment, and we can't report
but since DPLL can't be a module - move the code from the header
into the source file.
Fixes: 0d60d8df6f ("dpll: rely on rcu for netdev_dpll_pin()")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Link: https://lore.kernel.org/all/3fcf3a2c-1c1b-42c1-bacb-78fdcd700389@linux.vnet.ibm.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240229190515.2740221-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b38460bc46 ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.
So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cbcb ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mgmt: Fix limited discoverable off timeout
- hci_qca: Set BDA quirk bit if fwnode exists in DT
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_sync: Check the correct flag before starting a scan
- Enforce validation on max value of connection interval
- hci_sync: Fix accept_list when attempting to suspend
- hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
- Avoid potential use-after-free in hci_error_reset
- rfcomm: Fix null-ptr-deref in rfcomm_check_security
- hci_event: Fix wrongly recorded wakeup BD_ADDR
- qca: Fix wrong event type for patch config command
- qca: Fix triggering coredump implementation
-----BEGIN PGP SIGNATURE-----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=ZpLZ
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- mgmt: Fix limited discoverable off timeout
- hci_qca: Set BDA quirk bit if fwnode exists in DT
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_sync: Check the correct flag before starting a scan
- Enforce validation on max value of connection interval
- hci_sync: Fix accept_list when attempting to suspend
- hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
- Avoid potential use-after-free in hci_error_reset
- rfcomm: Fix null-ptr-deref in rfcomm_check_security
- hci_event: Fix wrongly recorded wakeup BD_ADDR
- qca: Fix wrong event type for patch config command
- qca: Fix triggering coredump implementation
* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
Bluetooth: hci_sync: Fix accept_list when attempting to suspend
Bluetooth: Avoid potential use-after-free in hci_error_reset
Bluetooth: hci_sync: Check the correct flag before starting a scan
Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================
Link: https://lore.kernel.org/r/20240228145644.2269088-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the decrypt request goes to the backlog and crypto_aead_decrypt
returns -EBUSY, tls_do_decryption will wait until all async
decryptions have completed. If one of them fails, tls_do_decryption
will return -EBADMSG and tls_decrypt_sg jumps to the error path,
releasing all the pages. But the pages have been passed to the async
callback, and have already been released by tls_decrypt_done.
The only true async case is when crypto_aead_decrypt returns
-EINPROGRESS. With -EBUSY, we already waited so we can tell
tls_sw_recvmsg that the data is available for immediate copy, but we
need to notify tls_decrypt_sg (via the new ->async_done flag) that the
memory has already been released.
Fixes: 8590541473 ("net: tls: handle backlogging of crypto requests")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4755dd8d9bebdefaa19ce1439b833d6199d4364c.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.
We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916 ("tls: fix race between
async notify and socket close") took care of it.
This will make the next fix easier.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we peek from 2 records with a currently empty rx_list, and the
first record is decrypted synchronously but the second record is
decrypted async, the following happens:
1. decrypt record 1 (sync)
2. copy from record 1 to the userspace's msg
3. queue the decrypted record to rx_list for future read(!PEEK)
4. decrypt record 2 (async)
5. queue record 2 to rx_list
6. call process_rx_list to copy data from the 2nd record
We currently pass copied=0 as skip offset to process_rx_list, so we
end up copying once again from the first record. We should skip over
the data we've already copied.
Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1b132d2b2b99296bfde54e8a67672d90d6d16e71.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With mixed sync/async decryption, or failures of crypto_aead_decrypt,
we increment decrypt_pending but we never do the corresponding
decrement since tls_decrypt_done will not be called. In this case, we
should decrement decrypt_pending immediately to avoid getting stuck.
For example, the prequeue prequeue test gets stuck with mixed
modes (one async decrypt + one sync decrypt).
Fixes: 94524d8fc9 ("net/tls: Add support for async decryption of tls records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c56d5fc35543891d5319f834f25622360e1bfbec.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: collect tstats automatically
The commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf") added a field in struct_netdevice, which tells what
type of statistics the driver supports.
That field is used primarily to allocate stats structures automatically,
but, it also could leveraged to simplify the drivers even further, such
as, if the driver relies in the default stats collection, then it
doesn't need to assign to .ndo_get_stats64. That means that drivers only
assign functions to .ndo_get_stats64 if they are using something
special.
I started to move some of these drivers[1][2][3] to use the core
allocation, and with this change in, I just need to touch the driver
once, and be able to simplify the whole stats allocation and collection
for generic case.
There are 44 devices today that could benefit from this simplification.
# grep -r .ndo_get_stats64 | grep dev_get_tstats64 | wc -l
44
As of today, netnext only has the `sit` driver fully ported to core
stats allocation, hence the second patch.
Links:
[1] https://lore.kernel.org/all/20240227182338.2739884-1-leitao@debian.org/
[2] https://lore.kernel.org/all/20240222144117.1370101-1-leitao@debian.org/
[3] https://lore.kernel.org/all/20240223115839.3572852-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240228113125.3473685-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the driver is using the network core allocation mechanism, by setting
NETDEV_PCPU_STAT_TSTATS, as this driver is, then, it doesn't need to set
the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Since
the network core calls it automatically, and .ndo_get_stats64 should
only be set if the driver needs special treatment.
This simplifies the driver, since all the generic statistics is now
handled by core.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the network driver is relying in the net core to do stats allocation,
then we want to dev_get_tstats64() instead of netdev_stats_to_stats64(),
since there are per-cpu stats that needs to be taken in consideration.
This will also simplify the drivers in regard to statistics. Once the
driver sets NETDEV_PCPU_STAT_TSTATS, it doesn't not need to allocate the
stacks, neither it needs to set `.ndo_get_stats64 = dev_get_tstats64`
for the generic stats collection function anymore.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is just a trivial fix for a typo in a comment, no functional
changes.
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240228112447.1490926-1-siyanteng@loongson.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2BRo
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current HSR implementation uses following supervisory frame (even for
HSRv1 the HSR tag is not is not present):
00000000: 01 15 4e 00 01 2d XX YY ZZ 94 77 10 88 fb 00 01
00000010: 7e 1c 17 06 XX YY ZZ 94 77 10 1e 06 XX YY ZZ 94
00000020: 77 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00
The current code adds extra two bytes (i.e. sizeof(struct hsr_sup_tlv))
when offset for skb_pull() is calculated.
This is wrong, as both 'struct hsrv1_ethhdr_sp' and 'hsrv0_ethhdr_sp'
already have 'struct hsr_sup_tag' defined in them, so there is no need
for adding extra two bytes.
This code was working correctly as with no RedBox support, the check for
HSR_TLV_EOT (0x00) was off by two bytes, which were corresponding to
zeroed padded bytes for minimal packet size.
Fixes: eafaa88b3e ("net: hsr: Add support for redbox supervision frames")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228085644.3618044-1-lukma@denx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The input parameter 'level' in do_raw_set/getsockopt() is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228072505.640550-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Robert Marko says:
====================
net: dsa: mv88e6xxx: add Amethyst specific SMI GPIO function
Amethyst family (MV88E6191X/6193X/6393X) has a simplified SMI GPIO setting
via the Scratch and Misc register so it requires family specific function.
In the v1 review, Andrew pointed out that it would make sense to rename the
existing mv88e6xxx_g2_scratch_gpio_set_smi as it only works on the MV6390
family.
Changes in v2:
* Add rename of mv88e6xxx_g2_scratch_gpio_set_smi to
mv88e6390_g2_scratch_gpio_set_smi
====================
Link: https://lore.kernel.org/r/20240227175457.2766628-1-robimarko@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The existing mv88e6390_g2_scratch_gpio_set_smi() cannot be used on the
88E6393X as it requires certain P0_MODE, it also checks the CPU mode
as it impacts the bit setting value.
This is all irrelevant for Amethyst (MV88E6191X/6193X/6393X) as only
the default value of the SMI_PHY Config bit is set to CPU_MGD bootstrap
pin value but it can be changed without restrictions so that GPIO pins
9 and 10 are used as SMI pins.
So, introduce Amethyst specific function and call that if the Amethyst
family wants to setup the external PHY.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The name mv88e6xxx_g2_scratch_gpio_set_smi is a bit ambiguous as it appears
to only be applicable to the 6390 family, so lets rename it to
mv88e6390_g2_scratch_gpio_set_smi to make it more obvious.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I missed that inet6_dump_addr() is calling in6_dump_addrs()
from two points.
First one under RTNL protection, and second one under rcu_read_lock().
Since we want to remove RTNL use from inet6_dump_addr() very soon,
no longer assume in6_dump_addrs() is protected by RTNL (even
if this is still the case).
Use rcu_read_lock() earlier to fix this lockdep splat:
WARNING: suspicious RCU usage
6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0 Not tainted
net/ipv6/addrconf.c:5317 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor.2/8834:
#0: ffff88802f554678 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x119/0x780 net/netlink/af_netlink.c:2338
#1: ffffffff8f377a88 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0x676/0xda0 net/netlink/af_netlink.c:2265
#2: ffff88807e5f0580 (&ndev->lock){++--}-{2:2}, at: in6_dump_addrs+0xb8/0x1de0 net/ipv6/addrconf.c:5279
stack backtrace:
CPU: 1 PID: 8834 Comm: syz-executor.2 Not tainted 6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
lockdep_rcu_suspicious+0x220/0x340 kernel/locking/lockdep.c:6712
in6_dump_addrs+0x1b47/0x1de0 net/ipv6/addrconf.c:5317
inet6_dump_addr+0x1597/0x1690 net/ipv6/addrconf.c:5428
netlink_dump+0x6a6/0xda0 net/netlink/af_netlink.c:2266
__netlink_dump_start+0x59d/0x780 net/netlink/af_netlink.c:2374
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_rcv_msg+0xcf7/0x10d0 net/core/rtnetlink.c:6555
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2547
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8e0/0xcb0 net/netlink/af_netlink.c:1902
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
Fixes: c3718936ec ("ipv6: anycast: complete RCU handling of struct ifacaddr6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227222259.4081489-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_defer_free_flush() is currently called from net_rx_action()
and napi_threaded_poll().
We should also call it from __napi_busy_loop() otherwise
there is the risk the percpu queue can grow until an IPI
is forced from skb_attempt_defer_free() adding a latency spike.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Samiullah Khawaja <skhawaja@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227210105.3815474-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By moving some fields around, this patch shrinks
holes size from 56 to 32, saving 24 bytes on 64bit arches.
After the patch pahole gives the following for 'struct tcp_sock':
/* size: 2304, cachelines: 36, members: 162 */
/* sum members: 2234, holes: 6, sum holes: 32 */
/* sum bitfield members: 34 bits, bit holes: 5, sum bit holes: 14 bits */
/* padding: 32 */
/* paddings: 3, sum paddings: 10 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 12 */
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227192721.3558982-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i211 requires the same PTP timestamp adjustments as the i210,
according to its datasheet. To ensure consistent timestamping across
different platforms, this change extends the existing adjustments to
include the i211.
The adjustment result are tested and comparable for i210 and i211 based
systems.
Fixes: 3f544d2a4d ("igb: adjust PTP timestamps for Tx/Rx latency")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240227184942.362710-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If br_multicast_init_stats() fails, there is no need to set lockdep
classes. Just return from the error path.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227182338.2739884-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the bridge driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227182338.2739884-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename some test cases to avoid overlapping test names which is
problematic for the kernel test robot. No changes in the test's logic.
Suggested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240227170418.491442-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the commit d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!
Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.
This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.
Fixes: d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 446fda4f26 ("[NetLabel]: CIPSOv4 engine"), *bitmap_walk
function only returns -1. Nearly 18 years have passed, -2 scenes never
come up, so there's no need to consider it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240227093604.3574241-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
inet: implement lockless RTM_GETNETCONF ops
This series removes RTNL use for RTM_GETNETCONF operations on AF_INET.
- Annotate data-races to avoid possible KCSAN splats.
- "ip -4 netconf show dev XXX" can be implemented without RTNL [1]
- "ip -4 netconf" dumps can be implemented using RCU instead of RTNL [1]
[1] This only refers to RTM_GETNETCONF operation, "ip" command
also uses RTM_GETLINK dumps which are using RTNL at this moment.
====================
Link: https://lore.kernel.org/r/20240227092411.2315725-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) inet_netconf_dump_devconf() can run under RCU protection
instead of RTNL.
2) properly return 0 at the end of a dump, avoiding an
an extra recvmsg() system call.
3) Do not use inet_base_seq() anymore, for_each_netdev_dump()
has nice properties. Restarting a GETDEVCONF dump if a device has
been added/removed or if net->ipv4.dev_addr_genid has changed is moot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"ip -4 netconf show dev XXXX" no longer acquires RTNL.
Return -ENODEV instead of -EINVAL if no netdev or idev can be found.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add READ_ONCE() in ipv4_devconf_get() and corresponding
WRITE_ONCE() in ipv4_devconf_set()
Add IPV4_DEVCONF_RO() and IPV4_DEVCONF_ALL_RO() macros,
and use them when reading devconf fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227092411.2315725-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d1d77120bc ("net: phy: dp83826: support TX data voltage tuning")
introduced a regression in that WOL is not disabled by default for DP83826.
WOL should normally be enabled through ethtool.
Fixes: d1d77120bc ("net: phy: dp83826: support TX data voltage tuning")
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Link: https://lore.kernel.org/r/20240226162339.696461-1-catalin.popescu@leica-geosystems.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: stop using libmnl
There is no strong reason to stop using libmnl in ynl but there
are a few small ones which add up.
First (as I remembered immediately after hitting send on v1),
C++ compilers do not like the libmnl for_each macros.
I haven't tried it myself, but having all the code directly
in YNL makes it easier for folks porting to C++ to modify them
and/or make YNL more C++ friendly.
Second, we do much more advanced netlink level parsing in ynl
than libmnl so it's hard to say that libmnl abstracts much from us.
The fact that this series, removing the libmnl dependency, only
adds <300 LoC shows that code savings aren't huge.
OTOH when new types are added (e.g. auto-int) we need to add
compatibility to deal with older version of libmnl (in fact,
even tho patches have been sent months ago, auto-ints are still
not supported in libmnl.git).
Thrid, the dependency makes ynl less self contained, and harder
to vendor in. Whether vendoring libraries into projects is a good
idea is a separate discussion, nonetheless, people want to do it.
Fourth, there are small annoyances with the libmnl APIs which
are hard to fix in backward-compatible ways. See the last patch
for example.
All in all, libmnl is a great library, but with all the code
generation and structured parsing, ynl is better served by going
its own way.
v1: https://lore.kernel.org/all/20240222235614.180876-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20240227223032.1835527-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To stick to libmnl wrappers in the past we had to use poll()
to check if there are any outstanding notifications on the socket.
This is no longer necessary, we can use MSG_DONTWAIT.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-16-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most libmnl socket helpers can be replaced by direct calls to
the underlying libc API. We need portid, the netlink manpage
suggests we bind() address of zero.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-14-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing callbacks take struct ynl_parse_arg as the argument.
Make that official by using a local callback type instead of mnl_cb_t.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's only one set of callbacks in YNL, for netlink control
messages, and most of them are trivial. So implement the message
walking directly without depending on mnl_cb_run2().
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl_recv_ack() is simple and it's the only user of mnl_cb_run().
Now that ynl_sock_read_msgs() exists it's actually less code
to use ynl_sock_read_msgs() instead of being special.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All callers to mnl_cb_run2() call mnl_socket_recvfrom() right before.
Wrap the two in a helper, take typed arguments (struct ynl_parse_arg),
instead of hoping that all callers remember that parser error handling
requires yarg.
In case of ynl_sock_read_family() we will no longer check for kernel
returning no data, but that would be a kernel bug, not worth complicating
the code to catch this. Calling mnl_cb_run2() on an empty buffer
is legal and results in STOP (1).
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f2ba1e5e22 ("tools: ynl-gen: stop generating common notification handlers")
removed the last caller of the parse_cb_run() helper.
We no longer need to export ynl_cb_array.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing code expects a pointer to struct ynl_parse_arg AKA yarg.
For dump was pass in struct ynl_dump_state, which works fine, because
struct ynl_dump_state and struct ynl_parse_arg have identical layout
for the members that matter.. but it's a bit hacky.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create helpers for accessing payloads of struct nlmsg.
Use them instead of the libmnl ones.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
