mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 21:51:40 +00:00
5dfe9d2739
1280527 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Neal Cardwell
|
5dfe9d2739 |
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
Testing determined that the recent commit |
||
Shannon Nelson
|
84b767f9e3 |
ionic: use dev_consume_skb_any outside of napi
If we're not in a NAPI softirq context, we need to be careful
about how we call napi_consume_skb(), specifically we need to
call it with budget==0 to signal to it that we're not in a
safe context.
This was found while running some configuration stress testing
of traffic and a change queue config loop running, and this
curious note popped out:
[ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545
[ 4371.402897] caller is napi_skb_cache_put+0x16/0x80
[ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G OE 6.10.0-rc3-netnext+ #8
[ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021
[ 4371.403460] Call Trace:
[ 4371.403613] <TASK>
[ 4371.403758] dump_stack_lvl+0x4f/0x70
[ 4371.403904] check_preemption_disabled+0xc1/0xe0
[ 4371.404051] napi_skb_cache_put+0x16/0x80
[ 4371.404199] ionic_tx_clean+0x18a/0x240 [ionic]
[ 4371.404354] ionic_tx_cq_service+0xc4/0x200 [ionic]
[ 4371.404505] ionic_tx_flush+0x15/0x70 [ionic]
[ 4371.404653] ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic]
[ 4371.404805] ionic_txrx_deinit+0x71/0x190 [ionic]
[ 4371.404956] ionic_reconfigure_queues+0x5f5/0xff0 [ionic]
[ 4371.405111] ionic_set_ringparam+0x2e8/0x3e0 [ionic]
[ 4371.405265] ethnl_set_rings+0x1f1/0x300
[ 4371.405418] ethnl_default_set_doit+0xbb/0x160
[ 4371.405571] genl_family_rcv_msg_doit+0xff/0x130
[...]
I found that ionic_tx_clean() calls napi_consume_skb() which calls
napi_skb_cache_put(), but before that last call is the note
/* Zero budget indicate non-NAPI context called us, like netpoll */
and
DEBUG_NET_WARN_ON_ONCE(!in_softirq());
Those are pretty big hints that we're doing it wrong. We can pass a
context hint down through the calls to let ionic_tx_clean() know what
we're doing so it can call napi_consume_skb() correctly.
Fixes:
|
||
Tristram Ha
|
b1c4b4d452 |
net: dsa: microchip: fix wrong register write when masking interrupt
The switch global port interrupt mask, REG_SW_PORT_INT_MASK__4, is
defined as 0x001C in ksz9477_reg.h. The designers used 32-bit value in
anticipation for increase of port count in future product but currently
the maximum port count is 7 and the effective value is 0x7F in register
0x001F. Each port has its own interrupt mask and is defined as 0x#01F.
It uses only 4 bits for different interrupts.
The developer who implemented the current interrupt mechanism in the
switch driver noticed there are similarities between the mechanism to
mask port interrupts in global interrupt and individual interrupts in
each port and so used the same code to handle these interrupts. He
updated the code to use the new macro REG_SW_PORT_INT_MASK__1 which is
defined as 0x1F in ksz_common.h but he forgot to update the 32-bit write
to 8-bit as now the mask registers are 0x1F and 0x#01F.
In addition all KSZ switches other than the KSZ9897/KSZ9893 and LAN937X
families use only 8-bit access and so this common code will eventually
be changed to accommodate them.
Fixes:
|
||
luoxuanqiang
|
ff46e3b442 |
Fix race for duplicate reqsk on identical SYN
When bonding is configured in BOND_MODE_BROADCAST mode, if two identical
SYN packets are received at the same time and processed on different CPUs,
it can potentially create the same sk (sock) but two different reqsk
(request_sock) in tcp_conn_request().
These two different reqsk will respond with two SYNACK packets, and since
the generation of the seq (ISN) incorporates a timestamp, the final two
SYNACK packets will have different seq values.
The consequence is that when the Client receives and replies with an ACK
to the earlier SYNACK packet, we will reset(RST) it.
========================================================================
This behavior is consistently reproducible in my local setup,
which comprises:
| NETA1 ------ NETB1 |
PC_A --- bond --- | | --- bond --- PC_B
| NETA2 ------ NETB2 |
- PC_A is the Server and has two network cards, NETA1 and NETA2. I have
bonded these two cards using BOND_MODE_BROADCAST mode and configured
them to be handled by different CPU.
- PC_B is the Client, also equipped with two network cards, NETB1 and
NETB2, which are also bonded and configured in BOND_MODE_BROADCAST mode.
If the client attempts a TCP connection to the server, it might encounter
a failure. Capturing packets from the server side reveals:
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855116,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855123, <==
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117, <==
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117,
Two SYNACKs with different seq numbers are sent by localhost,
resulting in an anomaly.
========================================================================
The attempted solution is as follows:
Add a return value to inet_csk_reqsk_queue_hash_add() to confirm if the
ehash insertion is successful (Up to now, the reason for unsuccessful
insertion is that a reqsk for the same connection has already been
inserted). If the insertion fails, release the reqsk.
Due to the refcnt, Kuniyuki suggests also adding a return value check
for the DCCP module; if ehash insertion fails, indicating a successful
insertion of the same connection, simply release the reqsk as well.
Simultaneously, In the reqsk_queue_hash_req(), the start of the
req->rsk_timer is adjusted to be after successful insertion.
Fixes:
|
||
Nick Child
|
0983d288ca |
ibmvnic: Add tx check to prevent skb leak
Below is a summary of how the driver stores a reference to an skb during
transmit:
tx_buff[free_map[consumer_index]]->skb = new_skb;
free_map[consumer_index] = IBMVNIC_INVALID_MAP;
consumer_index ++;
Where variable data looks like this:
free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3]
consumer_index^
tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null]
The driver has checks to ensure that free_map[consumer_index] pointed to
a valid index but there was no check to ensure that this index pointed
to an unused/null skb address. So, if, by some chance, our free_map and
tx_buff lists become out of sync then we were previously risking an
skb memory leak. This could then cause tcp congestion control to stop
sending packets, eventually leading to ETIMEDOUT.
Therefore, add a conditional to ensure that the skb address is null. If
not then warn the user (because this is still a bug that should be
patched) and free the old pointer to prevent memleak/tcp problems.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
Jakub Kicinski
|
482000cf7f |
bpf-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZnlmXgAKCRDbK58LschI g2ovAP9iynwwFEjMSxHjQVXSq1J1PMqF4966vmy30RCKJMMN/QD/SRsRRKcfsPis BzKOdsOVbWlDl2CUqvBrPZGT6laKoQc= =6/0V -----END PGP SIGNATURE----- Merge tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-06-24 We've added 12 non-merge commits during the last 10 day(s) which contain a total of 10 files changed, 412 insertions(+), 16 deletions(-). The main changes are: 1) Fix a BPF verifier issue validating may_goto with a negative offset, from Alexei Starovoitov. 2) Fix a BPF verifier validation bug with may_goto combined with jump to the first instruction, also from Alexei Starovoitov. 3) Fix a bug with overrunning reservations in BPF ring buffer, from Daniel Borkmann. 4) Fix a bug in BPF verifier due to missing proper var_off setting related to movsx instruction, from Yonghong Song. 5) Silence unnecessary syzkaller-triggered warning in __xdp_reg_mem_model(), from Daniil Dulov. * tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xdp: Remove WARN() from __xdp_reg_mem_model() selftests/bpf: Add tests for may_goto with negative offset. bpf: Fix may_goto with negative offset. selftests/bpf: Add more ring buffer test coverage bpf: Fix overrunning reservations in ringbuf selftests/bpf: Tests with may_goto and jumps to the 1st insn bpf: Fix the corner case with may_goto and jump to the 1st insn. bpf: Update BPF LSM maintainer list bpf: Fix remap of arena. selftests/bpf: Add a few tests to cover bpf: Add missed var_off setting in coerce_subreg_to_size_sx() bpf: Add missed var_off setting in set_sext32_default_val() ==================== Link: https://patch.msgid.link/20240624124330.8401-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Daniil Dulov
|
7e9f794283 |
xdp: Remove WARN() from __xdp_reg_mem_model()
syzkaller reports a warning in __xdp_reg_mem_model().
The warning occurs only if __mem_id_init_hash_table() returns an error. It
returns the error in two cases:
1. memory allocation fails;
2. rhashtable_init() fails when some fields of rhashtable_params
struct are not initialized properly.
The second case cannot happen since there is a static const rhashtable_params
struct with valid fields. So, warning is only triggered when there is a
problem with memory allocation.
Thus, there is no sense in using WARN() to handle this error and it can be
safely removed.
WARNING: CPU: 0 PID: 5065 at net/core/xdp.c:299 __xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299
CPU: 0 PID: 5065 Comm: syz-executor883 Not tainted 6.8.0-syzkaller-05271-gf99c5f563c17 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:__xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299
Call Trace:
xdp_reg_mem_model+0x22/0x40 net/core/xdp.c:344
xdp_test_run_setup net/bpf/test_run.c:188 [inline]
bpf_test_run_xdp_live+0x365/0x1e90 net/bpf/test_run.c:377
bpf_prog_test_run_xdp+0x813/0x11b0 net/bpf/test_run.c:1267
bpf_prog_test_run+0x33a/0x3b0 kernel/bpf/syscall.c:4240
__sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5649
__do_sys_bpf kernel/bpf/syscall.c:5738 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5736 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Fixes:
|
||
Alexei Starovoitov
|
280e4ebffd |
selftests/bpf: Add tests for may_goto with negative offset.
Add few tests with may_goto and negative offset. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240619235355.85031-2-alexei.starovoitov@gmail.com |
||
|
Alexei Starovoitov
|
2b2efe1937 |
bpf: Fix may_goto with negative offset.
Zac's syzbot crafted a bpf prog that exposed two bugs in may_goto.
The 1st bug is the way may_goto is patched. When offset is negative
it should be patched differently.
The 2nd bug is in the verifier:
when current state may_goto_depth is equal to visited state may_goto_depth
it means there is an actual infinite loop. It's not correct to prune
exploration of the program at this point.
Note, that this check doesn't limit the program to only one may_goto insn,
since 2nd and any further may_goto will increment may_goto_depth only
in the queued state pushed for future exploration. The current state
will have may_goto_depth == 0 regardless of number of may_goto insns
and the verifier has to explore the program until bpf_exit.
Fixes:
|
||
Daniel Borkmann
|
316930d06b |
selftests/bpf: Add more ring buffer test coverage
Add test coverage for reservations beyond the ring buffer size in order to validate that bpf_ringbuf_reserve() rejects the request with NULL, all other ring buffer tests keep passing as well: # ./vmtest.sh -- ./test_progs -t ringbuf [...] ./test_progs -t ringbuf [ 1.165434] bpf_testmod: loading out-of-tree module taints kernel. [ 1.165825] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.284001] tsc: Refined TSC clocksource calibration: 3407.982 MHz [ 1.286871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc34e357, max_idle_ns: 440795379773 ns [ 1.289555] clocksource: Switched to clocksource tsc #274/1 ringbuf/ringbuf:OK #274/2 ringbuf/ringbuf_n:OK #274/3 ringbuf/ringbuf_map_key:OK #274/4 ringbuf/ringbuf_write:OK #274 ringbuf:OK #275 ringbuf_multi:OK [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> [ Test fixups for getting BPF CI back to work ] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240621140828.18238-2-daniel@iogearbox.net |
||
Jose Ignacio Tornos Martinez
|
058722ee35 |
net: usb: ax88179_178a: improve link status logs
Avoid spurious link status logs that may ultimately be wrong; for example,
if the link is set to down with the cable plugged, then the cable is
unplugged and after this the link is set to up, the last new log that is
appearing is incorrectly telling that the link is up.
In order to avoid errors, show link status logs after link_reset
processing, and in order to avoid spurious as much as possible, only show
the link loss when some link status change is detected.
cc: stable@vger.kernel.org
Fixes:
|
||
Ratheesh Kannoth
|
02ea312055 |
octeontx2-pf: Fix coverity and klockwork issues in octeon PF driver
Fix unintended sign extension and klockwork issues. These are not real issue but for sanity checks. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Jan Sokolowski
|
f4b91c1d17 |
ice: Rebuild TC queues on VSI queue reconfiguration
TC queues needs to be correctly updated when the number of queues on
a VSI is reconfigured, so netdev's queue and TC settings will be
dynamically adjusted and could accurately represent the underlying
hardware state after changes to the VSI queue counts.
Fixes:
|
||
Frank Li
|
8a67cbd47b |
dt-bindings: net: fman: remove ptp-timer from required list
IEEE1588(ptp) is optional feature for network. Remove it from required list to fix below CHECK_DTBS warning. arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David S. Miller
|
4ae2c67840 |
Merge branch 'phy-microchip-ksz-9897-errata'
Enguerrand de Ribaucourt says: ==================== Handle new Microchip KSZ 9897 Errata These patches implement some suggested workarounds from the Microchip KSZ 9897 Errata [1]. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf --- v7: - use dev_crit_once instead of dev_crit_ratelimited - add a comment to help users understand the consequences of half-duplex errors v6: https://lore.kernel.org/netdev/20240614094642.122464-1-enguerrand.de-ribaucourt@savoirfairelinux.com/ - remove KSZ9897 phy_id workaround (was a configuration issue) - use macros for checking link down in monitoring function - check if VLAN is enabled before monitoring resources v5: https://lore.kernel.org/all/20240604092304.314636-1-enguerrand.de-ribaucourt@savoirfairelinux.com/ - use macros for bitfields - rewrap comments - check ksz_pread* return values - fix spelling mistakes - remove KSZ9477 suspend/resume deletion patch v4: https://lore.kernel.org/all/20240531142430.678198-1-enguerrand.de-ribaucourt@savoirfairelinux.com/ - Rebase on net/main - Add Fixes: tags to the patches - reverse x-mas tree order - use pseudo phy_id instead of match_phy_device v3: https://lore.kernel.org/all/20240530102436.226189-1-enguerrand.de-ribaucourt@savoirfairelinux.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Enguerrand de Ribaucourt
|
bf1bff11e4 |
net: dsa: microchip: monitor potential faults in half-duplex mode
The errata DS80000754 recommends monitoring potential faults in
half-duplex mode for the KSZ9477 family.
half-duplex is not very common so I just added a critical message
when the fault conditions are detected. The switch can be expected
to be unable to communicate anymore in these states and a software
reset of the switch would be required which I did not implement.
Fixes:
|
||
|
Enguerrand de Ribaucourt
|
d963c95bc9 |
net: dsa: microchip: use collision based back pressure mode
Errata DS80000758 states that carrier sense back pressure mode can cause
link down issues in 100BASE-TX half duplex mode. The datasheet also
recommends to always use the collision based back pressure mode.
Fixes:
|
||
|
Enguerrand de Ribaucourt
|
54a4e5c163 |
net: phy: micrel: add Microchip KSZ 9477 to the device table
PHY_ID_KSZ9477 was supported but not added to the device table passed to
MODULE_DEVICE_TABLE.
Fixes:
|
||
Kory Maincent
|
42354e3c31 |
netlink: specs: Fix pse-set command attributes
Not all PSE attributes are used for the pse-set netlink command.
Select only the ones used by ethtool.
Fixes:
|
||
|
Nick Child
|
49bbeb5719 |
ibmvnic: Free any outstanding tx skbs during scrq reset
There are 2 types of outstanding tx skb's:
Type 1: Packets that are sitting in the drivers ind_buff that are
waiting to be batch sent to the NIC. During a device reset, these are
freed with a call to ibmvnic_tx_scrq_clean_buffer()
Type 2: Packets that have been sent to the NIC and are awaiting a TX
completion IRQ. These are free'd during a reset with a call to
clean_tx_pools()
During any reset which requires us to free the tx irq, ensure that the
Type 2 skb references are freed. Since the irq is released, it is
impossible for the NIC to inform of any completions.
Furthermore, later in the reset process is a call to init_tx_pools()
which marks every entry in the tx pool as free (ie not outstanding).
So if the driver is to make a call to init_tx_pools(), it must first
be sure that the tx pool is empty of skb references.
This issue was discovered by observing the following in the logs during
EEH testing:
TX free map points to untracked skb (tso_pool 0 idx=4)
TX free map points to untracked skb (tso_pool 0 idx=5)
TX free map points to untracked skb (tso_pool 1 idx=36)
Fixes:
|
||
|
Jakub Kicinski
|
2ea8a02a35 |
Here are some batman-adv bugfixes:
- Don't accept TT entries for out-of-spec VIDs, by Sven Eckelmann - Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks", by Linus Lüssing -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmZ1kA8WHHN3QHNpbW9u d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoYuHEACp9CIARf+NyyWYpoH7io4IsvpJ foqM4byM4CCTnUiRHKeIxdx5zWL8TDMlDd+ydagjLSgVDjXMnmr5jMNmQTjDc9YR 0fOQNR0kdK3kPdxdAqb9CIzjHae7YBsbsFqvTBKTSAAaLWiZAJpI3xbQioSsmxSG BHGQHy5gx7IJcTnPOqZ05tygF5/bvi8di6hKfV4kYhxicSRHMdPsgqxP1C0dMXmn myz8EhPcvBSVfF4bV9lVA/NBNVLEUlbgoPwtjOu9zmdu+ebmIq5fhy5ezMhuDPA2 KlCYq1FqHsm8sT8XzoC35eS7i+kJBcG1lZwf3vMn/01AiBdUpMIBm8Tl92qkF3Ft bvKkdMMzSuGlBMZf7fprNbjvmidi+/Fyl5kdrEOZTLkJJwbp4jR+FsLHTALDqWQB 6AskpPr41mp9p6bGIE6zK4cWBrjABBv1lJAIql0ApLX19OCRh4WOltWO3CF8PlZ1 j3JAJ7/jUgqRc637JTfuADKkZSyRlKGJJ15ltcdybrsHOGRUAmIQbcvk49JdJwjL tSDxsfdLebVWbfoXpj5tg0C7ZECa0kHQ0dw6x7QdvGbPZxAduc15QrX6/PE7zOMx zMI8+ZMxPELu7cpZ+fngy5qoMh6U47rskHSIclcJRZi1GrQhyRthfniBFPfCShww vUsmFXflExZUjlaPYg== =sCft -----END PGP SIGNATURE----- Merge tag 'batadv-net-pullrequest-20240621' of git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Don't accept TT entries for out-of-spec VIDs, by Sven Eckelmann - Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks", by Linus Lüssing * tag 'batadv-net-pullrequest-20240621' of git://git.open-mesh.org/linux-merge: Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks" batman-adv: Don't accept TT entries for out-of-spec VIDs ==================== Link: https://patch.msgid.link/20240621143915.49137-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
a38b800db8 |
linux-can-fixes-for-6.10-20240621
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmZ1TY8THG1rbEBwZW5n dXRyb25peC5kZQAKCRAoOKI+ei28b+pXB/9fsvj/6jQtOAyGUHzKlWLGkfqh199P ecWVL6/zCrAhS/CtE1VY97+6Khd9Ipmz7wXXE9IpuuIhMrfS0AkGy/9f30Kf59XL PcehYmmOzNlpEPdqTVYbJGc9gOl1LNUTtTfAtJMilOY4NtvGGr02YT+frKsEKjYe O/qrE6trjeAV3pHThZzqkVDDeTRP68XuMlx6W6NFduQOmCxB6bLluRMd5yqoV5G6 fLjRV5iwdB1qIU8Ny52NYGYrh0JfRqA97eLpMveTxG06/RCu7/zfAkdVJWfGf5ho 6PtRd7qqAh5uF2EZ5qXlzPc1FRyqFB8uhmavMetQ6g3F3UY6u0xSTVtF =5bED -----END PGP SIGNATURE----- Merge tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-06-21 The first patch is by Oleksij Rempel, it enhances the error handling for tightly received RTS message in the j1939 protocol. Shigeru Yoshida's patch fixes a kernel information leak in j1939_send_one() in the j1939 protocol. Followed by a patch by Oleksij Rempel for the j1939 protocol, to properly recover from a CAN bus error during BAM transmission. A patch by Chen Ni properly propagates errors in the kvaser_usb driver. The last patch is by Vitor Soares, that fixes an infinite loop in the mcp251xfd driver is SPI async sending fails during xmit. * tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: fix infinite loop when xmit fails can: kvaser_usb: fix return value for hif_usb_send_regout net: can: j1939: recover socket queue on CAN bus error during BAM transmission net: can: j1939: Initialize unused data in j1939_send_one() net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new ==================== Link: https://patch.msgid.link/20240621121739.434355-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Guillaume Nault
|
31392048f5 |
vxlan: Pull inner IP header in vxlan_xmit_one().
Ensure the inner IP header is part of the skb's linear data before
setting old_iph. Otherwise, on a non-linear skb, old_iph could point
outside of the packet data.
Unlike classical VXLAN, which always encapsulates Ethernet packets,
VXLAN-GPE can transport IP packets directly. In that case, we need to
look at skb->protocol to figure out if an Ethernet header is present.
Fixes:
|
||
|
Daniel Borkmann
|
cfa1a2329a |
bpf: Fix overrunning reservations in ringbuf
The BPF ring buffer internally is implemented as a power-of-2 sized circular
buffer, with two logical and ever-increasing counters: consumer_pos is the
consumer counter to show which logical position the consumer consumed the
data, and producer_pos which is the producer counter denoting the amount of
data reserved by all producers.
Each time a record is reserved, the producer that "owns" the record will
successfully advance producer counter. In user space each time a record is
read, the consumer of the data advanced the consumer counter once it finished
processing. Both counters are stored in separate pages so that from user
space, the producer counter is read-only and the consumer counter is read-write.
One aspect that simplifies and thus speeds up the implementation of both
producers and consumers is how the data area is mapped twice contiguously
back-to-back in the virtual memory, allowing to not take any special measures
for samples that have to wrap around at the end of the circular buffer data
area, because the next page after the last data page would be first data page
again, and thus the sample will still appear completely contiguous in virtual
memory.
Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for
book-keeping the length and offset, and is inaccessible to the BPF program.
Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ`
for the BPF program to use. Bing-Jhong and Muhammad reported that it is however
possible to make a second allocated memory chunk overlapping with the first
chunk and as a result, the BPF program is now able to edit first chunk's
header.
For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size
of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to
bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in
[0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets
allocate a chunk B with size 0x3000. This will succeed because consumer_pos
was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask`
check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able
to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned
earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data
pages. This means that chunk B at [0x4000,0x4008] is chunk A's header.
bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then
locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk
B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong
page and could cause a crash.
Fix it by calculating the oldest pending_pos and check whether the range
from the oldest outstanding record to the newest would span beyond the ring
buffer size. If that is the case, then reject the request. We've tested with
the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh)
before/after the fix and while it seems a bit slower on some benchmarks, it
is still not significantly enough to matter.
Fixes:
|
||
|
Alexei Starovoitov
|
2673315947 |
selftests/bpf: Tests with may_goto and jumps to the 1st insn
Add few tests with may_goto and jumps to the 1st insn. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240619011859.79334-2-alexei.starovoitov@gmail.com |
||
|
Alexei Starovoitov
|
5337ac4c9b |
bpf: Fix the corner case with may_goto and jump to the 1st insn.
When the following program is processed by the verifier:
L1: may_goto L2
goto L1
L2: w0 = 0
exit
the may_goto insn is first converted to:
L1: r11 = *(u64 *)(r10 -8)
if r11 == 0x0 goto L2
r11 -= 1
*(u64 *)(r10 -8) = r11
goto L1
L2: w0 = 0
exit
then later as the last step the verifier inserts:
*(u64 *)(r10 -8) = BPF_MAX_LOOPS
as the first insn of the program to initialize loop count.
When the first insn happens to be a branch target of some jmp the
bpf_patch_insn_data() logic will produce:
L1: *(u64 *)(r10 -8) = BPF_MAX_LOOPS
r11 = *(u64 *)(r10 -8)
if r11 == 0x0 goto L2
r11 -= 1
*(u64 *)(r10 -8) = r11
goto L1
L2: w0 = 0
exit
because instruction patching adjusts all jmps and calls, but for this
particular corner case it's incorrect and the L1 label should be one
instruction down, like:
*(u64 *)(r10 -8) = BPF_MAX_LOOPS
L1: r11 = *(u64 *)(r10 -8)
if r11 == 0x0 goto L2
r11 -= 1
*(u64 *)(r10 -8) = r11
goto L1
L2: w0 = 0
exit
and that's what this patch is fixing.
After bpf_patch_insn_data() call adjust_jmp_off() to adjust all jmps
that point to newly insert BPF_ST insn to point to insn after.
Note that bpf_patch_insn_data() cannot easily be changed to accommodate
this logic, since jumps that point before or after a sequence of patched
instructions have to be adjusted with the full length of the patch.
Conceptually it's somewhat similar to "insert" of instructions between other
instructions with weird semantics. Like "insert" before 1st insn would require
adjustment of CALL insns to point to newly inserted 1st insn, but not an
adjustment JMP insns that point to 1st, yet still adjusting JMP insns that
cross over 1st insn (point to insn before or insn after), hence use simple
adjust_jmp_off() logic to fix this corner case. Ideally bpf_patch_insn_data()
would have an auxiliary info to say where 'the start of newly inserted patch
is', but it would be too complex for backport.
Fixes:
|
||
|
David S. Miller
|
8406b56a91 |
Merge branch 'mlxsw-fixes'
Petr Machata says: ==================== mlxsw: Fixes This patchset fixes an issue with mlxsw driver initialization, and a memory corruption issue in shared buffer occupancy handling. v3: - Drop the core thermal fix, it's not relevant anymore. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Ido Schimmel
|
c28947de2b |
mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systems
The following two shared buffer operations make use of the Shared Buffer
Status Register (SBSR):
# devlink sb occupancy snapshot pci/0000:01:00.0
# devlink sb occupancy clearmax pci/0000:01:00.0
The register has two masks of 256 bits to denote on which ingress /
egress ports the register should operate on. Spectrum-4 has more than
256 ports, so the register was extended by cited commit with a new
'port_page' field.
However, when filling the register's payload, the driver specifies the
ports as absolute numbers and not relative to the first port of the port
page, resulting in memory corruptions [1].
Fix by specifying the ports relative to the first port of the port page.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0
Read of size 1 at addr ffff8881068cb00f by task devlink/1566
[...]
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xce/0x670
kasan_report+0xd7/0x110
mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0
mlxsw_devlink_sb_occ_snapshot+0x75/0xb0
devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0
genl_family_rcv_msg_doit+0x20c/0x300
genl_rcv_msg+0x567/0x800
netlink_rcv_skb+0x170/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x547/0x830
netlink_sendmsg+0x8d4/0xdb0
__sys_sendto+0x49b/0x510
__x64_sys_sendto+0xe5/0x1c0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
copy_verifier_state+0xbc2/0xfb0
do_check_common+0x2c51/0xc7e0
bpf_check+0x5107/0x9960
bpf_prog_load+0xf0e/0x2690
__sys_bpf+0x1a61/0x49d0
__x64_sys_bpf+0x7d/0xc0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
poison_slab_object+0x109/0x170
__kasan_slab_free+0x14/0x30
kfree+0xca/0x2b0
free_verifier_state+0xce/0x270
do_check_common+0x4828/0xc7e0
bpf_check+0x5107/0x9960
bpf_prog_load+0xf0e/0x2690
__sys_bpf+0x1a61/0x49d0
__x64_sys_bpf+0x7d/0xc0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes:
|
||
|
Ido Schimmel
|
0602697d6f |
mlxsw: pci: Fix driver initialization with Spectrum-4
Cited commit added support for a new reset flow ("all reset") which is
deeper than the existing reset flow ("software reset") and allows the
device's PCI firmware to be upgraded.
In the new flow the driver first tells the firmware that "all reset" is
required by issuing a new reset command (i.e., MRSR.command=6) and then
triggers the reset by having the PCI core issue a secondary bus reset
(SBR).
However, due to a race condition in the device's firmware the device is
not always able to recover from this reset, resulting in initialization
failures [1].
New firmware versions include a fix for the bug and advertise it using a
new capability bit in the Management Capabilities Mask (MCAM) register.
Avoid initialization failures by reading the new capability bit and
triggering the new reset flow only if the bit is set. If the bit is not
set, trigger a normal PCI hot reset by skipping the call to the
Management Reset and Shutdown Register (MRSR).
Normal PCI hot reset is weaker than "all reset", but it results in a
fully operational driver and allows users to flash a new firmware, if
they want to.
[1]
mlxsw_spectrum4 0000:01:00.0: not ready 1023ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 2047ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 4095ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 8191ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 16383ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 32767ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 65535ms after bus reset; giving up
mlxsw_spectrum4 0000:01:00.0: PCI function reset failed with -25
mlxsw_spectrum4 0000:01:00.0: cannot register bus device
mlxsw_spectrum4: probe of 0000:01:00.0 failed with error -25
Fixes:
|
||
Kuniyuki Iwashima
|
11b006d689 |
selftest: af_unix: Add Kconfig file.
diag_uid selftest failed on NIPA where the received nlmsg_type is
NLMSG_ERROR [0] because CONFIG_UNIX_DIAG is not set [1] by default
and sock_diag_lock_handler() failed to load the module.
# # Starting 2 tests from 2 test cases.
# # RUN diag_uid.uid.1 ...
# # diag_uid.c:159:1:Expected nlh->nlmsg_type (2) == SOCK_DIAG_BY_FAMILY (20)
# # 1: Test terminated by assertion
# # FAIL diag_uid.uid.1
# not ok 1 diag_uid.uid.1
Let's add all AF_UNIX Kconfig to the config file under af_unix dir
so that NIPA consumes it.
Fixes:
|
||
|
Shannon Nelson
|
2490785ee7 |
net: remove drivers@pensando.io from MAINTAINERS
Our corporate overlords have been changing the domains around again and this mailing list has gone away. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Eric Dumazet
|
62e58ddb14 |
net: add softirq safety to netdev_rename_lock
syzbot reported a lockdep violation involving bridge driver [1]
Make sure netdev_rename_lock is softirq safe to fix this issue.
[1]
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0 Not tainted
-----------------------------------------------------
syz-executor.2/9449 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
ffffffff8f5de668 (netdev_rename_lock.seqcount){+.+.}-{0:0}, at: rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
and this task is already holding:
ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: br_port_slave_changelink+0x3d/0x150 net/bridge/br_netlink.c:1212
which would create a new lock dependency:
(&br->lock){+.-.}-{2:2} -> (netdev_rename_lock.seqcount){+.+.}-{0:0}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&br->lock){+.-.}-{2:2}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86
call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers kernel/time/timer.c:2417 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428
run_timer_base kernel/time/timer.c:2437 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758
fs_reclaim_acquire+0xaf/0x140 mm/page_alloc.c:3800
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3890 [inline]
slab_alloc_node mm/slub.c:3980 [inline]
kmalloc_trace_noprof+0x3d/0x2c0 mm/slub.c:4147
kmalloc_noprof include/linux/slab.h:660 [inline]
kzalloc_noprof include/linux/slab.h:778 [inline]
class_dir_create_and_add drivers/base/core.c:3255 [inline]
get_device_parent+0x2a7/0x410 drivers/base/core.c:3315
device_add+0x325/0xbf0 drivers/base/core.c:3645
netdev_register_kobject+0x17e/0x320 net/core/net-sysfs.c:2136
register_netdevice+0x11d5/0x19e0 net/core/dev.c:10375
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:690 [inline]
nsim_create+0x647/0x890 drivers/net/netdevsim/netdev.c:750
__nsim_dev_port_add+0x6c0/0xae0 drivers/net/netdevsim/dev.c:1390
nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1446 [inline]
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1498 [inline]
nsim_dev_reload_up+0x69b/0x8e0 drivers/net/netdevsim/dev.c:985
devlink_reload+0x478/0x870 net/devlink/dev.c:474
devlink_nl_reload_doit+0xbd6/0xe50 net/devlink/dev.c:586
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
to a SOFTIRQ-irq-unsafe lock:
(netdev_rename_lock.seqcount){+.+.}-{0:0}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(netdev_rename_lock.seqcount);
local_irq_disable();
lock(&br->lock);
lock(netdev_rename_lock.seqcount);
<Interrupt>
lock(&br->lock);
*** DEADLOCK ***
3 locks held by syz-executor.2/9449:
#0: ffffffff8f5e7448 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock net/core/rtnetlink.c:79 [inline]
#0: ffffffff8f5e7448 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x842/0x1180 net/core/rtnetlink.c:6632
#1: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
#1: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: br_port_slave_changelink+0x3d/0x150 net/bridge/br_netlink.c:1212
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline]
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline]
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: team_change_rx_flags+0x29/0x330 drivers/net/team/team_core.c:1767
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&br->lock){+.-.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
br_add_if+0xb34/0xef0 net/bridge/br_if.c:682
do_set_master net/core/rtnetlink.c:2701 [inline]
do_setlink+0xe70/0x41f0 net/core/rtnetlink.c:2907
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
IN-SOFTIRQ-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86
call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers kernel/time/timer.c:2417 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428
run_timer_base kernel/time/timer.c:2437 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758
fs_reclaim_acquire+0xaf/0x140 mm/page_alloc.c:3800
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3890 [inline]
slab_alloc_node mm/slub.c:3980 [inline]
kmalloc_trace_noprof+0x3d/0x2c0 mm/slub.c:4147
kmalloc_noprof include/linux/slab.h:660 [inline]
kzalloc_noprof include/linux/slab.h:778 [inline]
class_dir_create_and_add drivers/base/core.c:3255 [inline]
get_device_parent+0x2a7/0x410 drivers/base/core.c:3315
device_add+0x325/0xbf0 drivers/base/core.c:3645
netdev_register_kobject+0x17e/0x320 net/core/net-sysfs.c:2136
register_netdevice+0x11d5/0x19e0 net/core/dev.c:10375
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:690 [inline]
nsim_create+0x647/0x890 drivers/net/netdevsim/netdev.c:750
__nsim_dev_port_add+0x6c0/0xae0 drivers/net/netdevsim/dev.c:1390
nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1446 [inline]
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1498 [inline]
nsim_dev_reload_up+0x69b/0x8e0 drivers/net/netdevsim/dev.c:985
devlink_reload+0x478/0x870 net/devlink/dev.c:474
devlink_nl_reload_doit+0xbd6/0xe50 net/devlink/dev.c:586
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
br_add_if+0xb34/0xef0 net/bridge/br_if.c:682
do_set_master net/core/rtnetlink.c:2701 [inline]
do_setlink+0xe70/0x41f0 net/core/rtnetlink.c:2907
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
}
... key at: [<ffffffff94b9a1a0>] br_dev_setup.__key+0x0/0x20
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (netdev_rename_lock.seqcount){+.+.}-{0:0} {
HARDIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
SOFTIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL READ USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
register_netdevice+0x1665/0x19e0 net/core/dev.c:10422
register_netdev+0x3b/0x50 net/core/dev.c:10512
loopback_net_init+0x73/0x150 drivers/net/loopback.c:217
ops_init+0x359/0x610 net/core/net_namespace.c:139
__register_pernet_operations net/core/net_namespace.c:1247 [inline]
register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1320
register_pernet_device+0x33/0x80 net/core/net_namespace.c:1407
net_dev_init+0xfcd/0x10d0 net/core/dev.c:11956
do_one_initcall+0x248/0x880 init/main.c:1267
do_initcall_level+0x157/0x210 init/main.c:1329
do_initcalls+0x3f/0x80 init/main.c:1345
kernel_init_freeable+0x435/0x5d0 init/main.c:1578
kernel_init+0x1d/0x2b0 init/main.c:1467
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
}
... key at: [<ffffffff8f5de668>] netdev_rename_lock+0x8/0xa0
... acquired at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
__dev_notify_flags+0xf7/0x400 net/core/dev.c:8816
__dev_set_promiscuity+0x152/0x5a0 net/core/dev.c:8588
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
team_change_rx_flags+0x203/0x330 drivers/net/team/team_core.c:1771
dev_change_rx_flags net/core/dev.c:8541 [inline]
__dev_set_promiscuity+0x406/0x5a0 net/core/dev.c:8585
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
br_port_clear_promisc net/bridge/br_if.c:135 [inline]
br_manage_promisc+0x505/0x590 net/bridge/br_if.c:172
nbp_update_port_count net/bridge/br_if.c:242 [inline]
br_port_flags_change+0x161/0x1f0 net/bridge/br_if.c:761
br_setport+0xcb5/0x16d0 net/bridge/br_netlink.c:1000
br_port_slave_changelink+0x135/0x150 net/bridge/br_netlink.c:1213
__rtnl_newlink net/core/rtnetlink.c:3689 [inline]
rtnl_newlink+0x169f/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
stack backtrace:
CPU: 0 PID: 9449 Comm: syz-executor.2 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_bad_irq_dependency kernel/locking/lockdep.c:2626 [inline]
check_irq_usage kernel/locking/lockdep.c:2865 [inline]
check_prev_add kernel/locking/lockdep.c:3138 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x4de0/0x5900 kernel/locking/lockdep.c:3869
__lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
__dev_notify_flags+0xf7/0x400 net/core/dev.c:8816
__dev_set_promiscuity+0x152/0x5a0 net/core/dev.c:8588
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
team_change_rx_flags+0x203/0x330 drivers/net/team/team_core.c:1771
dev_change_rx_flags net/core/dev.c:8541 [inline]
__dev_set_promiscuity+0x406/0x5a0 net/core/dev.c:8585
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
br_port_clear_promisc net/bridge/br_if.c:135 [inline]
br_manage_promisc+0x505/0x590 net/bridge/br_if.c:172
nbp_update_port_count net/bridge/br_if.c:242 [inline]
br_port_flags_change+0x161/0x1f0 net/bridge/br_if.c:761
br_setport+0xcb5/0x16d0 net/bridge/br_netlink.c:1000
br_port_slave_changelink+0x135/0x150 net/bridge/br_netlink.c:1213
__rtnl_newlink net/core/rtnetlink.c:3689 [inline]
rtnl_newlink+0x169f/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3b3047cf29
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3b311740c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f3b305b4050 RCX: 00007f3b3047cf29
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008
RBP: 00007f3b304ec074 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f3b305b4050 R15: 00007ffca2f3dc68
</TASK>
Fixes:
|
||
Taehee Yoo
|
e3f02f32a0 |
ionic: fix kernel panic due to multi-buffer handling
Currently, the ionic_run_xdp() doesn't handle multi-buffer packets
properly for XDP_TX and XDP_REDIRECT.
When a jumbo frame is received, the ionic_run_xdp() first makes xdp
frame with all necessary pages in the rx descriptor.
And if the action is either XDP_TX or XDP_REDIRECT, it should unmap
dma-mapping and reset page pointer to NULL for all pages, not only the
first page.
But it doesn't for SG pages. So, SG pages unexpectedly will be reused.
It eventually causes kernel panic.
Oops: general protection fault, probably for non-canonical address 0x504f4e4dbebc64ff: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.10.0-rc3+ #25
RIP: 0010:xdp_return_frame+0x42/0x90
Code: 01 75 12 5b 4c 89 e6 5d 31 c9 41 5c 31 d2 41 5d e9 73 fd ff ff 44 8b 6b 20 0f b7 43 0a 49 81 ed 68 01 00 00 49 29 c5 49 01 fd <41> 80 7d0
RSP: 0018:ffff99d00122ce08 EFLAGS: 00010202
RAX: 0000000000005453 RBX: ffff8d325f904000 RCX: 0000000000000001
RDX: 00000000670e1000 RSI: 000000011f90d000 RDI: 504f4e4d4c4b4a49
RBP: ffff99d003907740 R08: 0000000000000000 R09: 0000000000000000
R10: 000000011f90d000 R11: 0000000000000000 R12: ffff8d325f904010
R13: 504f4e4dbebc64fd R14: ffff8d3242b070c8 R15: ffff99d0039077c0
FS: 0000000000000000(0000) GS:ffff8d399f780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f41f6c85e38 CR3: 000000037ac30000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
? die_addr+0x33/0x90
? exc_general_protection+0x251/0x2f0
? asm_exc_general_protection+0x22/0x30
? xdp_return_frame+0x42/0x90
ionic_tx_clean+0x211/0x280 [ionic 15881354510e6a9c655c59c54812b319ed2cd015]
ionic_tx_cq_service+0xd3/0x210 [ionic 15881354510e6a9c655c59c54812b319ed2cd015]
ionic_txrx_napi+0x41/0x1b0 [ionic 15881354510e6a9c655c59c54812b319ed2cd015]
__napi_poll.constprop.0+0x29/0x1b0
net_rx_action+0x2c4/0x350
handle_softirqs+0xf4/0x320
irq_exit_rcu+0x78/0xa0
common_interrupt+0x77/0x90
Fixes:
|
||
|
Kory Maincent
|
7eadf50095 |
net: pse-pd: Kconfig: Fix missing firmware loader config select
Selecting FW_UPLOAD is not sufficient as it allows the firmware loader
API to be built as a module alongside the pd692x0 driver built as builtin.
Add select FW_LOADER to fix this issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406200632.hSChnX0g-lkp@intel.com/
Fixes:
|
||
Hangbin Liu
|
a95b031c67 |
bonding: fix incorrect software timestamping report
The __ethtool_get_ts_info function returns directly if the device has a
get_ts_info() method. For bonding with an active slave, this works correctly
as we simply return the real device's timestamping information. However,
when there is no active slave, we only check the slave's TX software
timestamp information. We still need to set the phc index and RX timestamp
information manually. Otherwise, the result will be look like:
Time stamping parameters for bond0:
Capabilities:
software-transmit
PTP Hardware Clock: 0
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
This issue does not affect VLAN or MACVLAN devices, as they only have one
downlink and can directly use the downlink's timestamping information.
Fixes:
|
||
Aryan Srivastava
|
00418d5530 |
net: mvpp2: fill-in dev_port attribute
Fill this in so user-space can identify multiple ports on the same CP unit. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Xin Long
|
a23ac973f6 |
openvswitch: get related ct labels from its master if it is not confirmed
Ilya found a failure in running check-kernel tests with at_groups=144 (144: conntrack - FTP SNAT orig tuple) in OVS repo. After his further investigation, the root cause is that the labels sent to userspace for related ct are incorrect. The labels for unconfirmed related ct should use its master's labels. However, the changes made in commit |
||
Vitor Soares
|
d8fb63e46c |
can: mcp251xfd: fix infinite loop when xmit fails
When the mcp251xfd_start_xmit() function fails, the driver stops
processing messages, and the interrupt routine does not return,
running indefinitely even after killing the running application.
Error messages:
[ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16
[ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3).
... and repeat forever.
The issue can be triggered when multiple devices share the same SPI
interface. And there is concurrent access to the bus.
The problem occurs because tx_ring->head increments even if
mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX
package while still expecting a response in
mcp251xfd_handle_tefif_one().
Resolve the issue by starting a workqueue to write the tx obj
synchronously if err = -EBUSY. In case of another error, decrement
tx_ring->head, remove skb from the echo stack, and drop the message.
Fixes:
|
||
Chen Ni
|
0d34d8163f |
can: kvaser_usb: fix return value for hif_usb_send_regout
As the potential failure of usb_submit_urb(), it should be better to return the err variable to catch the error. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cn Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> |
||
Oleksij Rempel
|
9ad1da14ab |
net: can: j1939: recover socket queue on CAN bus error during BAM transmission
Addresses an issue where a CAN bus error during a BAM transmission
could stall the socket queue, preventing further transmissions even
after the bus error is resolved. The fix activates the next queued
session after the error recovery, allowing communication to continue.
Fixes:
|
||
Shigeru Yoshida
|
b7cdf1dd5d |
net: can: j1939: Initialize unused data in j1939_send_one()
syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one()
creates full frame including unused data, but it doesn't initialize
it. This causes the kernel-infoleak issue. Fix this by initializing
unused data.
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
instrument_copy_to_user include/linux/instrumented.h:114 [inline]
copy_to_user_iter lib/iov_iter.c:24 [inline]
iterate_ubuf include/linux/iov_iter.h:29 [inline]
iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
iterate_and_advance include/linux/iov_iter.h:271 [inline]
_copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
copy_to_iter include/linux/uio.h:196 [inline]
memcpy_to_msg include/linux/skbuff.h:4113 [inline]
raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008
sock_recvmsg_nosec net/socket.c:1046 [inline]
sock_recvmsg+0x2c4/0x340 net/socket.c:1068
____sys_recvmsg+0x18a/0x620 net/socket.c:2803
___sys_recvmsg+0x223/0x840 net/socket.c:2845
do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939
__sys_recvmmsg net/socket.c:3018 [inline]
__do_sys_recvmmsg net/socket.c:3041 [inline]
__se_sys_recvmmsg net/socket.c:3034 [inline]
__x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034
x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1313 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
sock_alloc_send_skb include/net/sock.h:1842 [inline]
j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline]
j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline]
j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
____sys_sendmsg+0x877/0xb60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Bytes 12-15 of 16 are uninitialized
Memory access of size 16 starts at ffff888120969690
Data copied to user address 00000000200017c0
CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Fixes:
|
||
|
Oleksij Rempel
|
d3e2904f71 |
net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
This patch enhances error handling in scenarios with RTS (Request to
Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE
backtraces with a new error handling method. This provides clearer error
messages and allows for the early termination of problematic sessions.
Previously, sessions were only released at the end of j1939_xtp_rx_rts().
Potentially this could be reproduced with something like:
testj1939 -r vcan0:0x80 &
while true; do
# send first RTS
cansend vcan0 18EC8090#1014000303002301;
# send second RTS
cansend vcan0 18EC8090#1014000303002301;
# send abort
cansend vcan0 18EC8090#ff00000000002301;
done
Fixes:
|
||
|
Tristram Ha
|
ad53f5f54f |
net: dsa: microchip: fix initial port flush problem
The very first flush in any port will flush all learned addresses in all
ports. This can be observed by unplugging the cable from one port while
additional ports are connected and dumping the fdb entries.
This problem is caused by the initially wrong value programmed to the
REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and
SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when
ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit
takes effect and flushes all learned entries. After that call both bits
are reset and so the next port flush will not cause such problem again.
Fixes:
|
||
Linus Torvalds
|
d5a7fc58da |
Including fixes from wireless, bpf and netfilter.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Lb9b
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
|
||
|
Linus Torvalds
|
042742a1ff |
sound fixes for 6.10-rc5
Lots of small HD-audio quirks and fixes (mostly Realtek codec and Cirrus stuff). Also a small MIDI 2.0 fix and a fix for missing module description are included. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmZ0K6oOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE+vQxAAgUl0blTus8D0W2H7y034B/c8YhhlWMGX9KpO WQjvhjldkQLSJt2lqRnWzgbE/hZ5OauteOIG1omoh4vxi3OgT7Q3awFJAMtb0E2Z BKvf2Cp1eu2YKKJ7V9PYwWAIFpsZ7JxnhXerZvhwRhafkc8CYpvPpLjOJDbcaWpG V9LVi/Ew1qR0eMCYJ92453GP8OtX6+GRcNbXLq43h4pyhUrnbT2zCzFF1a3K8zXk KzhuWGXbAnLf/kIzchDm4nhoorPgJpd1/lwFy4VgFzxG/HbdtyMC1xF/IpJDvXCu 8dn63broqhqNlZa/b3XJI567UCet8Mrt6i1HoMQ8yLOimmmXyuVd+IMLf6BT9dzV tKaGhrIvqJz37QXGK3joClK3r3/ffJxTPlAplmtTwwzhgxH+bm6pg02lpsLtq+DV 4y+wC3jCkNkLvade1EFK4KLiTpCvgk0ql76bHRTkLwNrwyU30JxB2jj5uZLqjAGh GufF/9QlIL7mhWspwBOfaPaLX39lIYBVYxMt95DfV4MB6iRQc/Z+8boQpYRxOe5N moC23fetFf+isr7geiKNiyIiWlM7i3WdH//IUuYoAYtSte8ec98clC+Dz+QU1MJ6 1jNl6SU51XZEVnhNXp0lO16TdUQmHfkiy38JszjPm1DjSZO5nup96d573VxOfWhS jcJLirk= =E//p -----END PGP SIGNATURE----- Merge tag 'sound-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Lots of small HD-audio quirks and fixes (mostly Realtek codec and Cirrus stuff). Also a small MIDI 2.0 fix and a fix for missing module description are included" * tag 'sound-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE ALSA: hda/realtek: Add more codec ID to no shutup pins list sound/oss/dmasound: add missing MODULE_DESCRIPTION() macro ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ARP8 ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM ALSA: hda: tas2781: Component should be unbound before deconstruction ALSA: hda: cs35l41: Component should be unbound before deconstruction ALSA: hda: cs35l56: Component should be unbound before deconstruction ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4 ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5 ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 4 ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P Gen 5 ALSA: hda/realtek: Remove Framework Laptop 16 from quirks ALSA: hda/realtek: Limit mic boost on N14AP7 ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11. ALSA: seq: ump: Fix missing System Reset message handling ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind() ALSA: hda: cs35l56: Fix lifecycle of codec pointer |
||
|
Linus Torvalds
|
3a7b3836bb |
- Bug Fixes
- Fix AXP717 PMIC probe and by extension it's consumers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmZz8wMACgkQUa+KL4f8 d2GRKBAAosI0wvAh3zG8+IsZ2T9MYlIKEpUfz7D4cxGFqZY3+eh6g/XzZ05s29mE GsOhnR6SGs1K1TSoPT4Atu+gI48JaidgGEP+1myGZKYcFz7Fk6FlBws2STX7glVJ EWNH3PutwL/RRHwrGtzWuQR4nFbL6lK226in+gb21FFnZEBP+L8HIkyBbPwooSvK sfr6WhuM3FSx0xKgfy7MduufbnzLcYNtx0xWP1+nu450yKAXF7zmon6UXSSmwU2/ SsJ1II9FIXMs4rH51CYhdBfcgeDwD1CUltDczSmljfMl9hDG904CgvOteDj1P8dC cxwDNmGZCM8sdZeDLddj+m/OxMTJyLP8Lnp990+t3eQInlQDmDogMCaq4HKXjrmv afTsWC9EXbM4soA9RFdLEfaVCbDB7KM60Ynn1+2vuZj4O+aBSnsCcDq8pHRT8RYY V/Frk0NWKZpFMFq6QE5NzkAzNoWNloShsVZNFw3VV8OUnIEAq3c2+iyEhnz6t1bT 6JPgkkP+hN+POAux86HHaUqMIko7yCZ1oxa+lw4Xv22PYLRzl4pWUzPgQH1NK3Lq UjoQbig6T3XCMEuZV3dQRpfYTO8jX/KTtTsjiSvZq1CUQ/cffHYSUYDrElOap64R vGfyZM6Ewed0CqKotgVusOlJpdBoM9V3bqUUEKVaTnu+bLV6dJo= =KVSG -----END PGP SIGNATURE----- Merge tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd fix from Lee Jones: - Fix AXP717 PMIC probe and by extension its consumers * tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: axp20x: AXP717: Fix missing IRQ status registers range |
||
Oliver Neukum
|
fba3839853 |
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
This functions retrieves values by passing a pointer. As the function
that retrieves them can fail before touching the pointers, the variables
must be initialized.
Fixes:
|
||
Jiri Pirko
|
48dea8f7bb |
selftests: virtio_net: add forgotten config options
One may use tools/testing/selftests/drivers/net/virtio_net/config
for example for vng build command like this one:
$ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config
In that case, the needed kernel config options are not turned on.
Add the missed kernel config options.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240617072614.75fe79e7@kernel.org/
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Closes: https://lore.kernel.org/netdev/1a63f209-b1d4-4809-bc30-295a5cafa296@kernel.org/
Fixes:
|
||
|
Jakub Kicinski
|
3f67782e10 |
Merge branch 'bnxt_en-bug-fixes-for-net'
Michael Chan says: ==================== bnxt_en: Bug fixes for net The first firmware interface update is needed by the second patch to limit the number of TSO segments on the 5760X chips. The third patch fixes the TX error path for PTP packets. ==================== Link: https://lore.kernel.org/r/20240618215313.29631-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Pavan Chebbi
|
1e7962114c |
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
The current code only restores PTP tx_avail count when we get DMA
mapping errors. Fix it so that the PTP tx_avail count will be
restored for both DMA mapping errors and skb_pad() errors.
Otherwise PTP TX timestamp will not be available after a PTP
packet hits the skb_pad() error.
Fixes:
|