Context tracking involves tracking user, kernel, guest switches. 32-bit
shares interrupt and syscall entry and exit code (and context tracking
calls) with 64-bit, and KVM can not be selected if CONTEXT_TRACKING_USER
is enabled, so context tracking can be enabled for 32-bit.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095805.2823731-3-npiggin@gmail.com
There are two separeate implementations for 32-bit and 64-bit which
mostly do the same thing. Consolidating on one implementation ends
up being smaller and simpler, there is just irq soft-mask reconcile
that is specific to 64-bit.
There should be no real functional change with this patch, but it
does make the context tracking calls necessary for 32-bit to support
context tracking.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095805.2823731-2-npiggin@gmail.com
Commit ec3eb9d941 ("powerpc/perf: Use PVR rather than
oprofile field to determine CPU version") added usage
of pvr value instead of oprofile field to determine the
platform. In hv-24x7 pmu driver code, pvr check uses PVR_POWER8
when assigning the interface version for power8 platform.
But power8 can also have other pvr values like PVR_POWER8E and
PVR_POWER8NVL. Hence the interface version won't be set
properly incase of PVR_POWER8E and PVR_POWER8NVL.
Fix this issue by adding the checks for PVR_POWER8E and
PVR_POWER8NVL as well.
Fixes: ec3eb9d941 ("powerpc/perf: Use PVR rather than oprofile field to determine CPU version")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230131184804.220756-1-kjain@linux.ibm.com
When an ALU instruction is preceded by a MOV instruction
that just moves a source register into the destination register of
the ALU, replace that MOV+ALU instructions by an ALU operation
taking the source of the MOV as second source instead of using its
destination.
Before the change, code could look like the following, with
superfluous separate register move (mr) instructions.
70: 7f c6 f3 78 mr r6,r30
74: 7f a5 eb 78 mr r5,r29
78: 30 c6 ff f4 addic r6,r6,-12
7c: 7c a5 01 d4 addme r5,r5
With this commit, addition instructions take r30 and r29 directly.
70: 30 de ff f4 addic r6,r30,-12
74: 7c bd 01 d4 addme r5,r29
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6719beaf01f9dcbcdbb787ef67c4a2f8e3a4cb6.1675245773.git.christophe.leroy@csgroup.eu
At the time being, all ALU operation are performed with same L-source
and destination, requiring the L-source to be moved into destination via
a separate register move, like:
70: 7f c6 f3 78 mr r6,r30
74: 7f a5 eb 78 mr r5,r29
78: 30 c6 ff f4 addic r6,r6,-12
7c: 7c a5 01 d4 addme r5,r5
Introduce a second source register to all ALU operations. For the time
being that second source register is made equal to the destination
register.
That change will allow, via following patch, to optimise the generated
code as:
70: 30 de ff f4 addic r6,r30,-12
74: 7c bd 01 d4 addme r5,r29
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5aaaba50d9d6b4a0e9f0cd4a5e34101aca1e247.1675245773.git.christophe.leroy@csgroup.eu
Now that two real additional passes are performed in case of extra pass
requested by BPF core, padding is not needed anymore except during
initial pass done before memory allocation to count maximum possible
program size.
So, only do the padding when 'image' is NULL.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/921851d6577badc1e6b08b270a0ced80a6a26d03.1675245773.git.christophe.leroy@csgroup.eu
BPF core calls the jit compiler again for an extra pass in order
to properly set subprog addresses.
Unlike other architectures, powerpc only updates the addresses
during that extra pass. It means that holes must have been left
in the code in order to enable the maximum possible instruction
size.
In order to avoid waste of space, and waste of CPU time on powerpc
processors on which the NOP instruction is not 0-cycle, perform
two real additional passes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d484a4ac95949ff55fc4344b674e7c0d3ddbfcd5.1675245773.git.christophe.leroy@csgroup.eu
BPF progs are never called with more than one argument, plus the
tail call count as a second argument when needed.
So, no need to retrieve 9th and 10th argument (5th 64 bits argument)
from the stack in prologue.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/89a200fb45048601475c092c5775294dee3886de.1675245773.git.christophe.leroy@csgroup.eu
Until now a stack frame was set at all time due to the need
to keep tail call counter in the stack.
But since commit 89d21e259a ("powerpc/bpf/32: Fix Oops on tail call
tests") the tail call counter is passed via register r4. It is therefore
not necessary anymore to have a stack frame for that.
Just like PPC64, implement bpf_has_stack_frame() and only sets the frame
when needed.
The difference with PPC64 is that PPC32 doesn't have a redzone, so
the stack is required as soon as non volatile registers are used or
when tail call count is set up.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix commit reference in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d7b654a3cfe73d998697cb29bbc5ffd89bfdb1.1675245773.git.christophe.leroy@csgroup.eu
That test was introducted in 2006 by
commit 00ae36de49 ("[POWERPC] Better check in show_instructions").
At that time, there was no BPF progs.
As seen in message of commit 89d21e259a ("powerpc/bpf/32: Fix Oops
on tail call tests"), when a page fault occurs in test_bpf.ko for
instance, the code is dumped as XXXXXXXXs. Allthough
__kernel_text_address() checks is_bpf_text_address(), it seems it is
not enough.
Today, show_instructions() uses get_kernel_nofault() to read the code,
so there is no real need for additional verifications.
ARM64 and x86 don't do any additional check before dumping
instructions. Do the same and remove __kernel_text_address()
in show_instructions().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4fd69ef7945518c3e27f96b95046a5c1468d35bf.1675245773.git.christophe.leroy@csgroup.eu
For all unrecoverable errors we are missing to log the
error, Since machine_check_log_err() is not getting called
for unrecoverable errors. machine_check_log_err() is called
from deferred handler, To run deferred handlers we have to do
irq work raise from the exception handler.
For recoverable errors exception vector code takes care of
running deferred handlers.
For unrecoverable errors raise irq work in save_mce_event(),
So that we log the error from MCE deferred handler.
Log without this change
MCE: CPU27: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU27: PID: 10580 Comm: inject-ra-err NIP: [0000000010000df4]
MCE: CPU27: Initiator CPU
MCE: CPU27: Unknown
Log with this change
MCE: CPU24: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU24: PID: 1589811 Comm: inject-ra-err NIP: [0000000010000e48]
MCE: CPU24: Initiator CPU
MCE: CPU24: Unknown
RTAS: event: 5, Type: Platform Error (224), Severity: 3
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230201095933.129482-1-ganeshgr@linux.ibm.com
A couple of tests roll their own auto-allocating file read logic.
Add a generic implementation and convert them to use it.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-6-bgray@linux.ibm.com
Add helper functions to read and write (unsigned) long values directly
from/to files. One of the kernel interfaces uses hex strings, so we need
to allow passing a base too.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-5-bgray@linux.ibm.com
Often a file is expected to hold an integral value. Existing functions
will use a C stdlib function like atoi or strtol to parse the file.
These operations are error prone, with complicated error conditions
(atoi returns 0 if not a number, and is undefined behaviour if not in
range. strtol returns 0 if not a number, and LONG_MIN/MAX if not in
range + sets errno to ERANGE).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-4-bgray@linux.ibm.com
Debugfs files are not always integers, so make *_file return/write a
byte buffer, and *_int deal with int values specifically. This increases
consistency with the other file read/write helpers.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-3-bgray@linux.ibm.com
File read/write is reimplemented in about 5 different ways in the
various PowerPC selftests. This indicates it should be a common util.
Add a common read_file / write_file implementation and convert users
to it where (easily) possible.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-2-bgray@linux.ibm.com
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230202141919.2298821-1-gregkh@linuxfoundation.org
This looks like it came across from x86, but x86 uses TLB_FLUSH_ALL as
a parameter to internal functions. Powerpc never sets it anywhere.
Remove the associated logic and leave a warning for now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203111718.1149852-4-npiggin@gmail.com
The MMU_NO_CONTEXT checks are an unnecessary complication. Make
these warn to prepare to remove them in future.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203111718.1149852-3-npiggin@gmail.com
need_flush_all is only set by arch code to instruct generic tlb_flush
to flush all. It is never set by powerpc, so it can be removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203111718.1149852-2-npiggin@gmail.com
The "pci-OF-bus-map" property was declared deprecated in 2006 [1] and to
the best of everyone's knowledge is not used by anything anymore [2].
The creation of the property was disabled on powermac (arch/powerpc) in
2005 by commit 35499c0195 ("powerpc: Merge in 64-bit powermac
support."). But it is still created by default on CHRP.
On powermac the actual map (pci_to_OF_bus_map) is still used by default,
even though the device tree property is not created.
Add an option to enable/disable use of the pci_to_OF_bus_map, and
creation of the property (on CHRP).
Disabling the option allows enabling CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
which allows "normal" bus numbering and more than 256 buses, like 64-bit
and other architectures.
Mark the new option as default n, the intention is that the option and
the code will be removed in a future release.
[1]: https://lore.kernel.org/linuxppc-dev/1148016268.13249.14.camel@localhost.localdomain/
[2]: https://lore.kernel.org/all/575f239205e8635add81c9f902b7d9db7beb83ea.camel@kernel.crashing.org/
Signed-off-by: Pali Rohár <pali@kernel.org>
[mpe: Reword commit & help text, shrink option name, rework to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206113902.1857123-1-mpe@ellerman.id.au
It makes sense to enable CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT by default
(when possible by dependencies) to take advantages of all 256 PCI buses on
each PCI domain, like it is already on all other kernel architectures.
Fixes: 5663568130 ("powerpc/pci: Add config option for using all 256 PCI buses")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230128133459.32123-1-pali@kernel.org
Interrupt handlers called by soft-pending irq replay code can run
softirqs, softirq replay enables and disables local irqs, which allows
interrupts to come in including soft-masked interrupts, and it can
cause pending irqs to be replayed again. That makes the soft irq replay
state machine and possible races more complicated and fragile than it
needs to be.
Use irq_enter/irq_exit around irq replay to prevent softirqs running
while interrupts are being replayed. Softirqs will now be run at the
irq_exit() call after all the irq replaying is done. This prevents irqs
being replayed while irqs are being replayed, and should hopefully make
things simpler and easier to think about and debug.
A new PACA_IRQ_REPLAYING is added to prevent asynchronous interrupt
handlers hard-enabling EE while pending irqs are being replayed, because
that causes new pending irqs to arrive which is also a complexity. This
means pending irqs won't be profiled quite so well because perf irqs
can't be taken.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121102618.2824429-1-npiggin@gmail.com
NO_IRQ is a relic from the old days. It is not used anymore in core
functions. By the way, function irq_of_parse_and_map() returns value 0
on error.
In some drivers, NO_IRQ is erroneously used to check the return of
irq_of_parse_and_map().
It is not a real bug today because the only architectures using the
drivers being fixed by this patch define NO_IRQ as 0, but there are
architectures which define NO_IRQ as -1. If one day those
architectures start using the non fixed drivers, there will be a
problem.
Long time ago Linus advocated for not using NO_IRQ, see
https://lore.kernel.org/all/Pine.LNX.4.64.0511211150040.13959@g5.osdl.org
He re-iterated the same view recently in
https://lore.kernel.org/all/CAHk-=wg2Pkb9kbfbstbB91AJA2SF6cySbsgHG-iQMq56j3VTcA@mail.gmail.com
So test !irq instead of tesing irq == NO_IRQ.
All other usage of NO_IRQ for powerpc were removed in previous cycles so
the time has come to remove NO_IRQ completely for powerpc.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4b8d4f96140af01dec3a3330924dda8b2451c316.1674476798.git.christophe.leroy@csgroup.eu
At the time commit f97bb36f70 ("powerpc/rtas: Turn rtas lock into a
raw spinlock") was written, the spinlock lockup detection code called
__delay(), which will not make progress if the timebase is not
advancing. Since the interprocessor timebase synchronization sequence
for chrp, cell, and some now-unsupported Power models can temporarily
freeze the timebase through an RTAS function (freeze-time-base), the
lock that serializes most RTAS calls was converted to arch_spinlock_t
to prevent kernel hangs in the lockup detection code.
However, commit bc88c10d7e ("locking/spinlock/debug: Remove spinlock
lockup detection code") removed that inconvenient property from the
lock debug code several years ago. So now it should be safe to
reintroduce generic locks into the RTAS support code, primarily to
increase lockdep coverage.
Making rtas_lock a spinlock_t would violate lock type nesting rules
because it can be acquired while holding raw locks, e.g. pci_lock and
irq_desc->lock. So convert it to raw_spinlock_t. There's no apparent
reason not to upgrade timebase_lock as well.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-5-nathanl@linux.ibm.com
Only code internal to the RTAS subsystem needs access to the central
lock and parameter block. Remove these from the globally visible
'rtas' struct and make them file-static in rtas.c.
Some changed lines in rtas_call() lack appropriate spacing around
operators and cause checkpatch errors; fix these as well.
Suggested-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-4-nathanl@linux.ibm.com
The first symbol exports of RTAS functions and data came with the (now
removed) scanlog driver in 2003:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb
At the time this was applied, EXPORT_SYMBOL_GPL() was very new, and
the exports of rtas_call() etc have remained non-GPL. As new APIs have
been added to the RTAS subsystem, their symbol exports have followed
the convention set by existing code.
However, the historical evidence is that RTAS function exports have been
added over time only to satisfy the needs of in-kernel users, and these
clients must have fairly intimate knowledge of how the APIs work to use
them safely. No out of tree users are known, and future ones seem
unlikely.
Arguably the default for RTAS symbols should have become
EXPORT_SYMBOL_GPL once it was available. Let's make it so now, and
exceptions can be evaluated as needed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-3-nathanl@linux.ibm.com
No modular code needs access to the 'rtas' struct, so remove the
symbol export.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-2-nathanl@linux.ibm.com
When CONFIG_TARGET_CPU is specified then pass its value to the compiler
-mcpu option. This fixes following build error when building kernel with
powerpc e500 SPE capable cross compilers:
BOOTAS arch/powerpc/boot/crt0.o
powerpc-linux-gnuspe-gcc: error: unrecognized argument in option ‘-mcpu=powerpc’
powerpc-linux-gnuspe-gcc: note: valid arguments to ‘-mcpu=’ are: 8540 8548 native
make[1]: *** [arch/powerpc/boot/Makefile:231: arch/powerpc/boot/crt0.o] Error 1
Similar change was already introduced for the main powerpc Makefile in
commit 446cda1b21 ("powerpc/32: Don't always pass -mcpu=powerpc to the
compiler").
Fixes: 40a75584e5 ("powerpc/boot: Build wrapper for an appropriate CPU")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2ae3ae5887babfdacc34435bff0944b3f336100a.1674632329.git.christophe.leroy@csgroup.eu
Since commit 0069f3d14e ("powerpc/64e: Tie PPC_BOOK3E_64 to
PPC_E500MC"), the only possible BOOK3E/64 are E500, so no need of a
default CPU over the E5500.
When the user selects book3e, they must have an e500 compatible
compiler, and it won't work anymore with the default -mcpu=power64, see
commit d6b551b8f9 ("powerpc/64e: Fix build failure with GCC
12 (unrecognized opcode: `wrteei')").
For book3s/64, replace GENERIC_CPU by POWERPC64_CPU to match the PPC32
POWERPC_CPU, and set a default mpcu value in Kconfig directly.
When a user selects a particular CPU, they must ensure the compiler has
the requested capability. Therefore, remove hidden fallback, instead
offer user the possibility to say they want to use the toolchain
default.
Fixes: d6b551b8f9 ("powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')")
Reported-by: Pali Rohár <pali@kernel.org>
Tested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/76c11197b058193dcb8e8b26adffba09cfbdab11.1674632329.git.christophe.leroy@csgroup.eu
When a module with a livepatched function is unloaded and then reloaded,
klp attempts to dynamically re-patch it. On ppc64, that fails with the
following error:
module_64: livepatch_nfsd: Expected nop after call, got e8410018 at e_show+0x60/0x548 [livepatch_nfsd]
livepatch: failed to initialize patch 'livepatch_nfsd' for module 'nfsd' (-8)
livepatch: patch 'livepatch_nfsd' failed for module 'nfsd', refusing to load module 'nfsd'
The error happens because the restore r2 instruction had already
previously been written into the klp module's replacement function when
the original function was patched the first time. So the instruction
wasn't a nop as expected.
When the restore r2 instruction has already been patched in, detect that
and skip the warning and the instruction write.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2f6329ffd9674df6ff57e03edeb2ca54414770ab.1674617130.git.jpoimboe@kernel.org
restore_r2() returns 1 on success, which is surprising for a non-boolean
function. Change it to return 0 on success and -errno on error to match
kernel coding convention.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/15baf76c271a0ae09f7b8556e50f2b4251e7049d.1674617130.git.jpoimboe@kernel.org
Although the powerpc linker script mentions .comment in the DISCARD
section, that has never actually caused it to be discarded, because the
earlier ELF_DETAILS macro (previously STABS_DEBUG) explicitly includes
.comment.
However commit 99cb0d917f ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro. With binutils < 2.36 that causes the DISCARD directives later in
the script to be applied earlier, causing .comment to actually be
discarded.
It's confusing to explicitly include and discard .comment, and even more
so if the behaviour depends on the toolchain version. So don't discard
.comment in order to maintain the existing behaviour in all cases.
Fixes: 83a092cf95 ("powerpc: Link warning for orphan sections")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-3-mpe@ellerman.id.au
Relocatable kernels must not discard relocations, they need to be
processed at runtime. As such they are included for CONFIG_RELOCATABLE
builds in the powerpc linker script (line 340).
However they are also unconditionally discarded later in the
script (line 414). Previously that worked because the earlier inclusion
superseded the discard.
However commit 99cb0d917f ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 137). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier, causing .rela* to
actually be discarded at link time, leading to build warnings and a
kernel that doesn't boot:
ld: warning: discarding dynamic section .rela.init.rodata
Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE
is disabled.
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-2-mpe@ellerman.id.au
The powerpc linker script explicitly includes .exit.text, because
otherwise the link fails due to references from __bug_table and
__ex_table. The code is freed (discarded) at runtime along with
.init.text and data.
That has worked in the past despite powerpc not defining
RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker
script (line 410), and the explicit inclusion of .exit.text
earlier (line 280) supersedes the discard.
However commit 99cb0d917f ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 136). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier [1], causing
.exit.text to actually be discarded at link time, leading to build
errors:
'.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in
discarded section '.exit.text' of crypto/algboss.o
'.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in
discarded section '.exit.text' of drivers/nvdimm/core.o
Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic
DISCARDS macro to not include .exit.text at all.
1: https://lore.kernel.org/lkml/87fscp2v7k.fsf@igel.home/
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-1-mpe@ellerman.id.au
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
-----BEGIN PGP SIGNATURE-----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=M9iU
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced by a
function in the .text section
-----BEGIN PGP SIGNATURE-----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=ZQnP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early
-----BEGIN PGP SIGNATURE-----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=0nPr
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmOwNaYVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGWHYP/2Z9bU6pCBlzL4JN6ksS8RAEjfAr
SiNg03Imr3n77b6Pa+dqVFZhiYoa3trqeHnDvz3ldaGEQ7vWmyd0WydGOoudtXD6
rUij3Z0YyoSPH4kwzNdZwmHXTJaU471P5MBVA63q3nY4I/ihWu18rPXIGTS/sXxK
wSu126h1HxLf9NJFZoeZPgo5p31M8G8PM6Nxy2YTMyG/ClSaRpccpBiSImZMZiCK
cMWH92rASl3ZQx49kyZqGLe6Nx1dl5E5mynL/k8rJrdRd5tbt06Pq9MGapQlntwe
PcRFn0l3PzJ5dADrhpiVXakA0BPpauvNvIiQCAVfT3B7J+cdUftYphEtR3wwNXKI
b75zQwdeLkPI5Y+e4Jlp5H/gr71ltiW3cST6yBdOoYuYxSFf6VqQjL4G4l7X8sWh
KxUFv9Y2L3thZdYlY5Arc/iQQoHpS+7XBpRi7P5TC5/mZY7pFwUqawKXIgIGPpPx
5i9jxClhs+6lgfsO6SZ4TiQnN0OU5AMi+VNG5R7f4RGdVMHztHXdKTPeZOJ9kYrq
i2j+x6XoVs+MCNosS5OA820C5XM5b4XyOBOp6gcswP9ykViUOhqhGeBBHPNmTuXq
inqJZe4rwJoX6VrB5dgCxds9kEyXEuaONUhLTpx6mTkF6iSmM2iDYQ88y24BIo9z
syAga8KipXSMfytu
=yoFP
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
A single fix to address an issue with wake from suspend with PCS
adapters, from Adam.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCY6+JYAAKCRDdoc3SxdoY
dlYQAP0fABQ/yloLqTw11Lw0PNr3X8sVlI+l5QiOArmo9p2wvgEAqMP1bZVKlfp0
eSL10uDUxxuub69rK1v65wAIm4vp7AE=
=gsn6
-----END PGP SIGNATURE-----
Merge tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
"A single fix to address an issue with wake from suspend with PCS
adapters, from Adam"
* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Fix PCS quirk application for suspend
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=rSWr
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmOu9vEOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9M0w/9HX0lDRiw/SPYayqRGmVgM46PxfAPGMFvRzII
jmOUcCtu1zdG155IIASAAjAwaqxpGn2rhuq8SlVPAkWD/v/YvSU88AE8u9Oa/jpA
74pccAULN0xIB8ms0NOAE9myYC18U14V6rfAIORs10uHuETgbXsn6CrlIn/ccHXK
6ha5+F5TZqPDBggHaBfdRFXkkyrxGW4YQK95bOm0t4YqR4Y0Ff/zeU12dXWJfzyy
8NE7i/P/ncmcwR8/vHkKMNv79NVABRlYgHbD49i7ArhNHeEMl7aAKQYg4e6KkhHA
4xi0L8I6N4a2nyIij17CKpSh1I71DuxpmvLxQRV08bHRENcP625qd4/qCkakPHcO
Yxs6DNHtHXB8jsDCbNayCW01tt9dXc39HI96e37I9pbi25XcmA7s5qbiYqwqWwE0
g0MPF3alaQU6jOeidRtKjslhBWCFrltP3ziBa6dLhqoIamagOW6AsSFuRbAhjEUN
e+jvgeVPv/Z2C9eHkBdvKB1+a10gYYzlxMjKkFd8wU5MP9eDgSx8j1gwrxDtZqJR
sAEGbLmroiCHjqMsLref1oSkKAOcjFo+PfCBvr2myd5NGE7OucnsDhiMegw4pieQ
3UHRhyjt1U6MlK46iqxvHh8tZLErEd/8+Fe6oVH1VgLXv+hasnaQnUwBXt18un/h
CW8zyR4=
=mGy9
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops"
* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
ALSA: line6: fix stack overflow in line6_midi_transmit
ALSA: line6: correct midi status byte when receiving data from podxt
