This work shouldn't run after we're disconnecting. Cancel it earlier
(and then don't cancel it in stop later.)
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211034.ac754794279f.Ib9fbb1dab50c6b67f6de9be09a6c452ce89bbd50@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Annotate 'sub_specs' of 'struct cfg80211_sar_specs', 'channels'
of 'struct cfg80211_sched_scan_request', 'channels' of 'struct
cfg80211_wowlan_nd_match', and 'matches' of 'struct
cfg80211_wowlan_nd_info' with '__counted_by' attribute. Briefly
tested with clang 18.1.1 and CONFIG_UBSAN_BOUNDS running iwlwifi.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized
to pass EHT MU-MIMO configurations from user space to driver
in AP mode.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Link: https://msgid.link/20240515181327.12855-2-quic_pradeepc@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are now three places setting up chanreq.ap which always
depends on the mode (EHT being used or not) and override flag.
Refactor that code into a common function with a comment, to
make that clearer.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.5cd6a209e58a.I3be318959d9e2df5dccd2d0938c3d2fcc6688030@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During channel switch, track the AP configuration in the
chanreq, so that wider bandwidth OFDMA is taken into
account correctly, since multiple channel contexts may
be needed due to sharing not being possible due to
wider bandwidth OFDMA.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.b2c5a72dac1b.I69f65cb2e75d4a49a174b1aede68bf8ff0a3cab3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Collect the CSA data in ieee80211_link_data_managed and
ieee80211_link_data into a csa sub-struct to clean up a
bit and make adding new things more obvious.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.29f954b1f576.I9a683a9647c33d4dd3011aade6677982428c1082@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we see a channel switch announcement on one link for
another, handle that case and start the CSA. The driver
can react to this in whatever way it needs. The stack
will have the ability to track it via the RNR/MLE in the
reporting link's beacon if it sees it for inactive links
and adjust everything accordingly.
Note that currently the timings for the CSA aren't set,
the values are only used by the Intel drivers, and they
don't need this for newer devices that support MLO, so
I've left it out for now.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.4d34b6a31be7.Ie8453979f5805873a8411c99346bcc3810cd6476@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Just like it's not currently possible to start radar
detection while already operating, it shouldn't be
possible to start operating while radar detection is
running. Fix that.
Also, improve the check whether operating (carrier
might not be up if e.g. attempting to join IBSS).
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211158.ae8dca3d0d6c.I7c70a66a5fbdbc63a78fee8a34f31d1995491bc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At some point we thought perhaps this could be per link, but
really that didn't happen, and it's confusing. Radar detection
still uses the deflink to allocate the channel, but the work
need not be there. Move it back.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211311.43bd82c6da04.Ib39bec3aa198d137385f081e7e1910dcbde3aa1b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for enable/disable 11be for china and South Korea by
reading DSM function 12 from UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.037613d03c87.I4e5ee63c0dbdd4bd6c48daee7b0c88462b702423@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we exit EMLSR due to a IWL_MVM_ESR_EXIT*, a MLO scan followed by a
link selection is scheduled with a delay of 30 seconds.
If during that 30 seconds EMLSR was blocked and unblocked
(IWL_MVM_ESR_BLOCKED*), we would still want to get the needed data from
the MLO scan and select link accordingly, and not return immediately to
EMLSR.
Fixes: 2f33561ea8 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512152312.caab27a8dd8f.I63f67e213d5e05416f71513a8d914917d59aa44f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to calculate again whether data should
be included or be handled externally, just check if any
space for it was already reserved.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.a3d3b4796460.I85bd3029baee24ebf0be04db7d6bf01834090869@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to allocate buf1 if we're not going to
write anything to it, and the condition for writing is
(correctly) "hdr_len > 0 && !iwl_trace_data()". Also
allocate the event space only under the same condition.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.a11e6490d053.Ie090beea70d2f271bb22c9b0e287dbd342fb2a96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we crash the firmware, we need to know why we decided to do so.
Almost all the callsites of iwl_force_nmi() print something in the logs
that explain why the driver decided to crash the firmware.
Debugfs doesn't print anything and it is then hard to understand why the
firmware has crashed.
Add a simple print in the debugfs hook to ease the debug.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512075822.e2558de222dc.Idd81777c47264e6f557b086625895c1dc2f667f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When AUTO_EML is set to false, this change ignores the exit criteria,
for testing purposes. Currently, if AUTO_EML is disabled, the
driver will not select a link or enter EMLSR, but will still exit if one
of the criteria is not fulfilled.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512072733.10a0b5da6ec2.I46fd578a3ef6cdbf14fdc4dfa97b4be008fe68e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We track which link is using which FW link ID, so there
really isn't a need to separately track which link IDs
are in use. Remove that code and check the table when
looking for a new link ID to use.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.1a67d8af815f.Ie642c12dce3ab55c688abd9a25918569e83e558a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All our firmware versions should now be printed in hex.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.cae4c562b2c3.I5043383bd0e81f872c55046afd2c6560f482c8e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In practice, iwl_trans_get_rxq_dma_data() will not fail,
it only can do that if called with the wrong arguments.
But it does have an error value and doesn't initialize
the argument when it fails, so don't use the value then.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.faf3a1b87589.I77c950173cb914676fbd28483e5ef420bb9f1bc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add new time point to get the details of scan failure
While on it added other missing enum to match with FW.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.6781e76990c4.Iadfb3f6dd63a98fc35019772266b5ebddc5b5270@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The two versions of iwl_mei_set_power_limit() are a bit different,
and while really the const isn't all that necessary on the inline,
it's still better to have it be the same.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.854427753c92.I557716085cb1f6a35d1f97640388fa421f42a56a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Just like with any other frame, mac80211 will do sanity checks
on no-data RX (representing e.g. sounding PPDUs), and if e.g.
the NSS is wrong, it will warn. This isn't a good idea if we
already know the frame wasn't received well, e.g. has bad PLCP.
Unless the firmware reports "no error", set the bad PLCP flag
to skip checks in mac80211.
Also, since we're now extracting two different values from the
info field, use le32_get_bits() for both.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.e6adcb9a6ece.Ic14c2e8ed5e80d48af78b2f04e9f08beeb62d68e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver reads xtal_calib from NVM file, but actually never uses it.
This is only used in dvm driver.
Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.c4d1a4571049.I7d7b73dccb793e220f023e0d049b082b043ca95e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
fw_running assumes that memory can be retrieved only after alive.
This assumption is no longer true as we support dump before alive.
To avoid invalid access to the NIC, check that STATUS_DEVICE_ENABLED
bit in trans status is set before dumping instead of the prior check.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.ca07138cedeb.I090e31d3eaeb4ba19f5f84aba997ccd36927e9ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These flags are not needed on 6 GHz channels, and anyway they were set
incorrectly.
This in turn resulted in alternating channel flags, preventing reg domain
rules to be merged together, so cfg80211 couldn't even send them to the
user space, as the regulatory domain was too large.
Fix it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.b0d51b2229f8.I092e21cde43320ffc2eff17f5748ff9c87c87fcf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an entry for setting the maximum TXOP time in microseconds.
The configured value can be read from the same entry.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.b8d17a9c1731.I57c33574a61edd68bd0ec1aa7009f31111fd7efe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
uAPSD can't be enabled on BSS or P2P Client if there is
another active interface (e.g. associated client). Allow
the code that apply those limitations to run on BSS as well.
Also forbid uAPSD if we have an IBSS or NAN interface in
the system.
Since we are now forbidding uAPSD in any concurrency
scenario, we don't need to check the number of PHY
contexts.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.4ac26534adf7.Ib892020177e86603b2be3a105f8717b9a15951d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The logic here is rather convoluted - we cannot get here with
lq_sta being NULL as mac80211 will (no longer) call us like
that, and since I removed the rate_control_send_low() call in
this function there's no longer any point in setting priv_sta
to NULL either.
So the only thing that remains to check is if we have actually
initialized our lq_sta->drv pointer, and exit if we didn't in
which case we'll use the data mac80211 already set up for the
low rate usage.
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Link: https://msgid.link/20240510170500.a4cdb41825eb.Id202bcc967c32829f70ab1412f8893b6eb7f78e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of passing the full TPE elements, in all their glory
and mixed up data formats for HE backward compatibility, parse
them fully into the right values, and pass that to the drivers.
Also introduce proper validation already in mac80211, so that
drivers don't need to do it, and parse the EHT portions.
The code now passes the values in the right order according to
the channel used by an interface, which could also be a subset
of the data advertised by the AP, if we couldn't connect with
the full bandwidth (for whatever reason.)
Also add kunit tests for the more complicated bits of it.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The chanctx can be shared, but it seems like the TPE values for
this vif should only reflect the channel that the vif uses, which
is captured in bss_conf->chanreq.oper rather than the chanctx.
Use that when calculating defaults, a similar issue is where the
data from the AP is processed, but I'm moving that to mac80211.
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.d99fcf5856b9.I359bb401ea74bf82dc981a86a7ca3fa44d169d2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The define IEEE80211_MAX_NUM_PWR_LEVEL doesn't make much
sense. Yes, that table has a maximum value of 8, and the
table will actually remain that way, but EHT introduced
a way to encode more levels for 320 MHz channels.
Remove IEEE80211_MAX_NUM_PWR_LEVEL and, for ath11k being
the only user, add ATH11K_NUM_PWR_LEVELS, where it makes
sense since it cannot support 320 MHz channels.
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.9818e5471055.Icece7e47e963d6b68e0d97ba13c102b37fbaa689@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
6 GHz AP power type details are required to set proper tx power
used to send frames.
Update AP power type received in beacon while preparing
for connection instead of after association so the frames
before association can use the correct tx power.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Link: https://msgid.link/20240506214536.310434f55f76.I6aca291ee06265e3f63e0f9024ba19a850b53a33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add trace events to trace when wiphy works are queued (or
delayed ones scheduled), and other APIs are called. Also
add an event when the worker starts, before acquiring the
mutex, to be able to see potential delays due to locking.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://msgid.link/20240506210002.bf1840a1d22d.I4abba048c1c4017345640219cf1384a0b2288dd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
