The helper is generic, it doesn't use the opaque EDID type struct drm_edid
and is also used by drivers that only support non-probeable displays such
as fixed panels.
These drivers add a list of modes using drm_mode_probed_add() and then set
a preferred mode using the drm_set_preferred_mode() helper.
It seems more logical to have the helper definition in drm_modes.o instead
of drm_edid.o, since the former contains modes helper while the latter has
helpers to manage the EDID information.
Since both drm_edid.o and drm_modes.o object files are built-in the drm.o
object, there are no functional changes. But besides being a more logical
place for this helper, it could also allow to eventually make drm_edid.o
optional and not included in drm.o if only fixed panels must be supported
in a given system.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102122208.3103597-1-javierm@redhat.com
There's no need to include either linux/hdmi.h or drm/drm_mode.h. They
can be removed by using forward declarations.
While at it, group the forward declarations together, and remove the
unnecessary ones.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104211028.1129606-1-jani.nikula@intel.com
This is only a cosmetic change.
This replaces a hand-crafted EPROBE_DEFER handling for deciding to print
an error message with dev_err_probe.
A side-effect is that dev_err_probe also adds a debug message when it's
not EPROBE_DEFER, but this is seen as an improvement.
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-2-8ef3c0b585d8@theobroma-systems.com
devm_gpiod_get_optional may return EPROBE_DEFER in case the GPIO
controller isn't yet probed when the panel driver is being probed.
In that case, a spurious and confusing error message about not being
able to get the reset GPIO is printed even though later on the device
actually manages to get probed.
Use dev_err_probe instead so that the message is only printed when it
truly matters.
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-1-8ef3c0b585d8@theobroma-systems.com
This scary message can misled the user into thinking something bad has
happened and needs to be fixed, however it could simply be part of a
normal boot process where EPROBE_DEFER is taken into account. Therefore,
let's use dev_err_probe so that this message doesn't get shown (by
default) when the return code is EPROBE_DEFER.
Fixes: 34cc0aa254 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-2-9c59a5779cf9@theobroma-systems.com
ret variable stores the return value of drm_of_find_panel_or_bridge
which can return error codes different from EPROBE_DEFER. Therefore,
let's just return that error code instead of forcing it to EPROBE_DEFER.
Fixes: 34cc0aa254 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-1-9c59a5779cf9@theobroma-systems.com
Now that we have proper pixelclock-based mode validation we can drop the
custom fill_modes hook.
CRTC size validation for the display controller has been added with
Commit 8e140cb602 ("drm/rockchip: vop: limit maximum resolution to
hardware capabilities")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-27-knaerzche@gmail.com
As per TRM this controller supports pixelclocks starting from 25 MHz. The
maximum supported pixelclocks are defined by the phy configurations we
have. Also it can't support modes that require doubled clocks. If the
variant has a phy reference clock we can additionally validate against VESA
DMT'srecommendations.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-26-knaerzche@gmail.com
This variant requires the phy reference clock to be enabled before the DDC
block can work and the (initial) DDC bus frequency is calculated based on
the rate of this clock. Besides the only difference is phy configuration
required to make the driver working for this variant as well.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-25-knaerzche@gmail.com
In preparation to support RK3128's integration of the controller, this
patch adds a simple variant implementation. They mainly differ in the phy
configuration required, so those are part of the match_data. The values
have been taken from downstream. The pixelclocks in there are meant to be
max-inclusive.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-24-knaerzche@gmail.com
Fix a new kernel-doc warning reported by kernel test robot:
vmwgfx_surface.c:55: warning: Excess struct member 'base' description in 'vmw_user_surface'
The other warning is not correct: it is confused by "__counted_by".
Kees has made a separate patch for that.
In -Wall mode, kernel-doc still reports 20 warnings of this nature:
vmwgfx_surface.c:198: warning: No description found for return value of 'vmw_surface_dma_size'
but I am not addressing those.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150701.kNI9LuM3-lkp@intel.com/
Cc: Kees Cook <keescook@chromium.org>
Cc: Zack Rusin <zackr@vmware.com>
Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215235638.19189-1-rdunlap@infradead.org
kernel test robot reports one kernel-doc warning in stdu, but
running scripts/kernel-doc in -Wall mode reports several more,
so fix all of them at one time:
vmwgfx_stdu.c:76: warning: Excess struct member 'transfer' description in 'vmw_stdu_dirty'
vmwgfx_stdu.c:103: warning: missing initial short description on line:
* struct vmw_screen_target_display_unit
vmwgfx_stdu.c:215: warning: No description found for return value of 'vmw_stdu_bind_st'
vmwgfx_stdu.c:320: warning: No description found for return value of 'vmw_stdu_destroy_st'
vmwgfx_stdu.c:551: warning: No description found for return value of 'vmw_kms_stdu_readback'
vmwgfx_stdu.c:719: warning: No description found for return value of 'vmw_kms_stdu_surface_dirty'
vmwgfx_stdu.c:895: warning: No description found for return value of 'vmw_stdu_primary_plane_prepare_fb'
vmwgfx_stdu.c:1470: warning: No description found for return value of 'vmw_stdu_init'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150347.5icezNlK-lkp@intel.com/
Cc: Zack Rusin <zackr@vmware.com>
Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215234102.16574-1-rdunlap@infradead.org
While making a spelling mistake myself for `git grep kvalloc`
I found that the only file has such a typo. Fix it and update
to the standard de facto of how we refer to the functions.
Also spell usr-out as user-out, it seems this driver uses its
own terminology nobody else can decypher, make it more readable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219151955.2477488-1-andriy.shevchenko@linux.intel.com
When the floor LUT index (drm_fixp2int(lut_index) is the last
index of the array the ceil LUT index will point to an entry
beyond the array. Make sure we guard against it and use the
value of the floor LUT index.
v3:
- Drop bits from commit description that didn't contribute
anything of value
Fixes: db1f254f2c ("drm/vkms: Add support to 1D gamma LUT")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-6-harry.wentland@amd.com
This aligns with most other DRM drivers and will allow
us to add new VKMS config options without polluting
the DRM Kconfig.
v3:
- Change SPDX to GPL-2.0-only to match DRM KConfig
SPDX (Simon)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-4-harry.wentland@amd.com
Unit testing this in VKMS shows that passing 0 into
this function returns -1, which is highly counter-
intuitive. Fix it by checking whether the input is
>= 0 instead of > 0.
Fixes: 64566b5e76 ("drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-2-harry.wentland@amd.com
Bubble up any error to the caller.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231216141518.242811-1-contact@emersion.fr
The Solomon SSD133x controllers (such as the SSD1331) are used by RGB dot
matrix OLED panels, add a modesetting pipeline to support the chip family.
The SSD133x controllers support 256 (8-bit) and 65k (16-bit) color depths
but only the 256-color mode (DRM_FORMAT_RGB332) is implemented for now.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229112026.2797483-5-javierm@redhat.com
This splits setting the power mode of the controller / phy in two
functions. It's done in preparation of setting up the phy based on the
pixelclock.
No functional changes intended.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-23-knaerzche@gmail.com
inno_hdmi_reset is only ever called when initializing the controller. At
this point it’s completely uneccessary to power up the PHY, since all
what has to work at this point is the DDC bus. The phy will be powered up
correctly when a mode is set in inno_hdmi_encoder_enable and disabled in
inno_hdmi_encoder_disable.
Set it to LOWER_PWR after resetting the controller.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-22-knaerzche@gmail.com
The display controller will always give full range RGB regardless of the
mode set, but HDMI requires certain modes to be transmitted in limited
range RGB. This is especially required for HDMI sinks which do not support
non-standard quantization ranges.
This enables color space conversion for those modes and sets the
quantization range accordingly in the AVI infoframe.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-21-knaerzche@gmail.com
The data which is currently hold in hdmi_data should not be part of device
itself but of the connector state.
Introduce a connector state subclass and move the data from hdmi_data in
there.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-20-knaerzche@gmail.com
The drm_dev field in the inno_hdmi struct stores a pointer to the DRM
device but is never used anywhere in the driver. Let's remove it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-17-knaerzche@gmail.com
The inno_hdmi driver relies on its own internal infoframe type matching
the hardware.
This works fine, but in order to make further reworks easier, let's
switch to the HDMI spec definition of those types.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-16-knaerzche@gmail.com
The code to upload infoframes to the controller uses a weird construct
which, based on the previous function call return code, will either
disable or enable that infoframe.
In order to get rid of that argument, let's split the function to
disable the infoframe into a separate function and make it obvious what
we are doing in the error path.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-15-knaerzche@gmail.com
The HDMI vendor infoframe is only meant to be sent with 4k60 modes and
higher, but the controller doesn't support them. Let's drop them from
the kernel.
Suggested-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-14-knaerzche@gmail.com
The tmds_rate field in the inno_hdmi structure is used mostly to
configure the internal i2c controller divider through a call to the
inno_hdmi_i2c_init() function.
We can simply make that rate an argument to that function, which also
removes a workaround to initialize the divider at probe time when we
don't have a mode yet.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-13-knaerzche@gmail.com
The driver has a lot of logic to deal with multiple input formats, but
hardcodes it to RGB. This means that most of that code has been dead
code, so let's get rid of it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-11-knaerzche@gmail.com
The sink_has_audio flag is not used anywhere in the driver so let's get
rid of it. It's redundant with drm_display_info.has_audio anyway.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-10-knaerzche@gmail.com
The mode's VIC is only ever used in the inno_hdmi_setup() function so
there's no need to store it in the main structure.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-9-knaerzche@gmail.com
We're not doing anything special in atomic_mode_set so we can simply
merge it into atomic_enable.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-8-knaerzche@gmail.com
The inno_hdmi encoder still uses the !atomic variants of enable, disable
and modeset. Convert to their atomic equivalents.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-7-knaerzche@gmail.com
The driver maintains a copy of the adjusted mode but doesn't use it
anywhere. Remove it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-6-knaerzche@gmail.com
The mode_fixup implementation doesn't do anything, so we can simply
remove it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-5-knaerzche@gmail.com
In contrast to RK3036, RK312x SoCs have multiple output channels such as
RGB (i.e. LVDS TTL), LVDS, DSI and HDMI.
In order to support that, this splits output from RK3036 and defines an
separate one for RK3126 with the registers required to enable the
appropriate output and setup the correct polarity.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-3-knaerzche@gmail.com
tilcdc currently just ioremaps its iomem, without doing the (a bit more
robust) request on the memory first. The devm_ functions provide a handy
way to both request and ioremap the memory with automatic cleanup.
Replace the manual ioremap with the devm_ version.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222115216.19218-2-pstanner@redhat.com
In probe() we create the drm_device, and then register the MHI controller.
In remove(), we should unregister the controller first, then remove the
drm_device. Update the remove() operations to match.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-8-quic_jhugo@quicinc.com
