Currently the ad5064 only supports two different register map variations
and this is represented by a bool. This patch changes since to a enum so
we can support more variations in the future.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
List the newly support LTC devices in the Kconfig entry for the AD5064
driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The Linear Technology LTC2606, LTC2607, LTC2609, LTC2616, LTC2617,
LTC2619, LTC2626, LTC2627 and LTC2629 devices are very similar
to the AD5064 device.
This patch adds support for those devices.
Datasheet for LTC devices:
LTC2606, LTC2616, LTC2626: http://www.linear.com/docs/6398
LTC2607, LTC2617, LTC2627: http://www.linear.com/docs/8977
LTC2709, LTC2619, LTC2629: http://www.linear.com/docs/8477
Signed-off-by: Marc Andre <marc.andre@netline.ch>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch makes minor structural changes to support specifics
for LTC2617 DAC. This DAC requires different handling of the
power down modes. The configuration to actually support the
DAC will be submitted in a secondary patch.
Adjust the DECLARE_AD5064_CHANNELS() macro to accept a new
ext_info parameter. This allows to use different power down
modes per DAC. (e.g. DAC only support 90kohm to ground)
Add the chip_info parameter "powerdown_ltc". This parameter is
used in the ad5064_sync_powerdown_mode() function to handle the
power down command for LTC diffently. For those devices the
power down command must be addressed to the channel.
Signed-off-by: Marc Andre <marc.andre@netline.ch>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
mlock *must* be used by core and drivers to protect access
to devices state changes.
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Both the SPI and platform device driver for the ad7606 use the same set of
PM ops. Consolidate them in the common part of the driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add driver for the TI AFE4403 heart rate monitor and pulse oximeter.
This device detects reflected LED light fluctuations and presents an ADC
value to the user space for further signal processing.
Data sheet located here:
http://www.ti.com/product/AFE4403/datasheet
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add the TI AFE4403 heart monitor DT bindings documentation.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add driver for the TI AFE4404 heart rate monitor and pulse oximeter.
This device detects reflected LED light fluctuations and presents an ADC
value to the user space for further signal processing.
Datasheet: http://www.ti.com/product/AFE4404/datasheet
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add the TI afe4404 heart monitor DT bindings documentation.
Create health directory created under iio.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch replaces the clk_get() with devm_clk_get().Accordingly,modified
the error paths,rename error labels and removed clk_put() in probe() &
remove functions.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The newly added atlas-ph-sensor driver uses irq_work_queue, which
may not always be enabled:
ERROR: "irq_work_queue" [drivers/iio/chemical/atlas-ph-sensor.ko] undefined!
This adds a 'select' statement to Kconfig to ensure it's there
when we need it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 27dec00ecf ("iio: chemical: add Atlas pH-SM sensor support")
Reviewed-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
We have the same code for computing the scan index storage size in bytes
all over the place. Factor this out into helper functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This will be used together with an external trigger (e.g hrtimer
based software trigger).
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This allows data exported via buffer interface to be converted
to standard units in userspace.
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In this file,function names are otherwise used as pointers without &.
Found using coccinelle.
// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
// </smpl>
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
By slightly reordering the channels in the channel spec array we can reuse
the same array for all variant of the chip.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There is no need to print debug message when kmalloc is failed.
This message is redundant. The code already show us that kmalloc is
failed. The braces of first if statement is remove as well because if
statement has a single statement.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes error codes as -ENOMEM instead of using -EFAULT if
kmalloc is failed.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes coding style of kmalloc usage found by checkpatch.pl
CHECK: Prefer kmalloc(sizeof(*mgmt_tx)...) over kmalloc(sizeof(struct
tx_complete_mon_data)...)
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds braces on all arms of if statement found by
checkpatch.pl
CHECK: braces {} should be used on all arms of this statement
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch inserts a blank line afer function found by checkpatch.pl
CHECK: Please use a blank line after function/struct/union/enum
declarations
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes space after a type cast found by checkpatch.pl
CHECK: No space is necessary after a cast
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes NULL comparsion style found by checkpatch.pl
CHECK: Comparison to NULL could be written "!wilc_wfi_mon"
CHECK: Comparison to NULL could be written "!skb"
CHECK: Comparison to NULL could be written "!skb"
CHECK: Comparison to NULL could be written "!dev"
CHECK: Comparison to NULL could be written "!mgmt_tx"
CHECK: Comparison to NULL could be written "!mgmt_tx->buff"
CHECK: Comparison to NULL could be written "!wilc_wfi_mon"
CHECK: Comparison to NULL could be written "!mon_priv"
CHECK: Comparison to NULL could be written "!priv"
CHECK: Comparison to NULL could be written "wilc_wfi_mon"
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes blank lines before a close brace found by
checkpatch.pl
CHECK: Blank lines aren't necessary before a close brace '}'
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch remove blank lines after open brace found by checkpatch.pl
CHECK: Blank lines aren't necessary after an open brace '{'
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch warning:
WARNING: __packed is preferred over __attribute__((packed))
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should be called up(&mq->sem) to release semaphore before returning
error codes as -EFAULT when list is empty.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch uses standard struct list_head in struct message and
message_queue instead of custom linked list.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames u16index variable to index
to remove the prefix variable defined name.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames u16TagParamOffset variable to tag_param_offset
to avoid camelcase.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames u16RxLen variable to rx_len to avoid camelcase.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are over-commenting in the coreconfigurator.c file and most of them
are not helpful to explain what the code does and generate 80 ending
line over warnings. So, all of comments are removed in this patch and the
comments will later be added if necessary with the preferred Linux style.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checks reported by checkpatch.pl
for spaces required around that '=' or '||' or '('.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the check reported by checkpatch.pl
for 'no space is necessary after a cast'.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checking wilc_netdev and skb->dev are already done in the begining of the
function and they are just print printing error log, so delete them.
Null checking wilc is needed before is used so add null ckeck before it is
used.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the check found by checkpatch.pl
CHECK: Alignment should match open parenthesis
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
host_int_set_power_mgmt should be called after changing operation mode to
work properly. Move the function below host_int_set_operation_mode.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In previous patch, we use unified firmware on wilc, which means we do not need
to download firmware again to change virtual interfaces.
There are a lot of codes to change interface and they are needless now, so
remove them except wilc_set_operation_mode function which change the mode and
wilc_set_power_mgmt which control power save.
There will be unused functions and they will be removed in later patch.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes index 0 to index of vif which is currently beging used
because AP mode can run on any interface.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch add new argument mode to wilc_wlan_set_bssid and define mode in
struct wilc_vif also. The mode is used by get_if_handler function to get proper
netdevice for each mode.
The get_if_handler is changed together. Remove invalid handle codes and
add mode condition to get netdevice for the mode.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wilc_set_machw_change_vir_if is not used anymore since we use one unified
firmware. Instead, wilc_set_operation_mode is called when wilc_mac_open to
let the wilc use the proper firmware. Remove wilc_set_machw_change_vir_if
and it's functions calls.
In the later patch, mac index will be passed to wilc device.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a unified firmware for all mode of operations which are station, ap and
p2p. Two firmware are introduced for 1002 and 1003 chipset.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get mac address from wilc device instead of using random mac address.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sleep is not necessary during handling tx queue so remove it and also reduce
close time to 5 sec since it is enough time to close.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds ops resume, suspend and set_wakeup in cfg80211. Together with
previous patches, driver will support suspend/resume functionality.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Part of sdio init codes should not run when sdio init function is called on
sdio resume so skip them.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces sdio device suspend and resume functionality. sdio_reset
function is added to reset sdio. Remove static inline keyword from
chip_allow_sleep and chip_wakeup, and export symbols.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wilc supports suspend/resume functionality. Introduce new sleep and wakeup
functions and remove old codes since that will be handled in the new functions.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
