mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 12:11:40 +00:00
4929257613
2543 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
0215331944 |
Kconfig: Disable -Wstringop-overflow for GCC globally
It turns out it was never just gcc-11 that was broken. Apparently it just happens to work on x86-64 with other gcc versions. On arm64, I see warnings with gcc version 13.2.1, and the kernel test robot reports the same problem on s390 with gcc 13.2.0. Admittedly it seems to be just the new Xe drm driver, but this is keeping me from doing my normal arm64 build testing. So it gets reverted until somebody figures out what causes the problem (and why it doesn't show on x86-64, which is what makes me suspect it was never just about gcc-11, and more about just random happenstance). This also changes the Kconfig naming a bit - just make the "disable this for GCC" conditional be one simple Kconfig entry, and we can put the gcc version dependencies in that entry once we figure out what the correct rules are. The version dependency _may_ still end up being "gcc version larger than 11" if the issue is purely in the Xe driver, but even if that ends up the case, let's make that all part of the "GCC_NO_STRINGOP_OVERFLOW" logic. For now, we just disable it for all gcc versions while the exact cause is unknown. Link: https://lore.kernel.org/all/202401161031.hjGJHMiJ-lkp@intel.com/T/ Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Gustavo A. R. Silva
|
a5e0ace04f |
init: Kconfig: Disable -Wstringop-overflow for GCC-11
-Wstringop-overflow is buggy in GCC-11. Therefore, we should disable this option specifically for that compiler version. To achieve this, we introduce a new configuration option: GCC11_NO_STRINGOP_OVERFLOW. The compiler option related to string operation overflow is now managed under configuration CC_STRINGOP_OVERFLOW. This option is enabled by default for all other versions of GCC that support it. Link: https://lore.kernel.org/lkml/b3c99290-40bc-426f-b3d2-1aa903f95c4e@embeddedor.com/ Link: https://lore.kernel.org/lkml/20231128091351.2bfb38dd@canb.auug.org.au/ Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/linux-hardening/ZWj1+jkweEDWbmAR@work/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> |
||
Linus Torvalds
|
80955ae955 |
Driver core changes for 6.8-rc1
Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing major in here this release cycle, just lots of small cleanups and some tweaks on kernfs that in the very end, got reverted and will come back in a safer way next release cycle. Included in here are: - more driver core 'const' cleanups and fixes - fw_devlink=rpm is now the default behavior - kernfs tiny changes to remove some string functions - cpu handling in the driver core is updated to work better on many systems that add topologies and cpus after booting - other minor changes and cleanups All of the cpu handling patches have been acked by the respective maintainers and are coming in here in one series. Everything has been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeOrg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymtcwCffzvKKkSY9qAp6+0v2WQNkZm1JWoAoJCPYUwF If6wEoPLWvRfKx4gIoq9 =D96r -----END PGP SIGNATURE----- Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing major in here this release cycle, just lots of small cleanups and some tweaks on kernfs that in the very end, got reverted and will come back in a safer way next release cycle. Included in here are: - more driver core 'const' cleanups and fixes - fw_devlink=rpm is now the default behavior - kernfs tiny changes to remove some string functions - cpu handling in the driver core is updated to work better on many systems that add topologies and cpus after booting - other minor changes and cleanups All of the cpu handling patches have been acked by the respective maintainers and are coming in here in one series. Everything has been in linux-next for a while with no reported issues" * tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits) Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock" kernfs: convert kernfs_idr_lock to an irq safe raw spinlock class: fix use-after-free in class_register() PM: clk: make pm_clk_add_notifier() take a const pointer EDAC: constantify the struct bus_type usage kernfs: fix reference to renamed function driver core: device.h: fix Excess kernel-doc description warning driver core: class: fix Excess kernel-doc description warning driver core: mark remaining local bus_type variables as const driver core: container: make container_subsys const driver core: bus: constantify subsys_register() calls driver core: bus: make bus_sort_breadthfirst() take a const pointer kernfs: d_obtain_alias(NULL) will do the right thing... driver core: Better advertise dev_err_probe() kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy() kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy() kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy() initramfs: Expose retained initrd as sysfs file fs/kernfs/dir: obey S_ISGID kernel/cgroup: use kernfs_create_dir_ns() ... |
||
Linus Torvalds
|
296455ade1 |
Char/Misc and other Driver changes for 6.8-rc1
Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Lots of stuff in here, but first off, you will get a merge conflict in drivers/android/binder_alloc.c when merging this tree due to changing coming in through the -mm tree. The resolution of the merge issue can be found here: https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au or in a simpler patch form in that thread: https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com If there are issues with the merge of this file, please let me know. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues (other than the binder merge conflict.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP YoI7f1I4GBcC0GKNfK6s =+Kyv -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ... |
||
Linus Torvalds
|
78273df7f6 |
header cleanups for 6.8
The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies. Testing - it's been in -next, and fixes from pretty much all architectures have percolated in - nothing major. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmWfBwwACgkQE6szbY3K bnZPwBAAmuRojXaeWxi01IPIOehSGDe68vw44PR9glEMZvxdnZuPOdvE4/+245/L bRKU2WBCjBUokUbV9msIShwRkFTZAmEMPNfPAAsFMA+VXeDYHKB+ZRdwTggNAQ+I SG6fZgh5m0HsewCDxU8oqVHkjVq4fXn0cy+aL6xLEd9gu67GoBzX2pDieS2Kvy6j jnyoKTxFwb+LTQgph0P4EIpq5I2umAsdLwdSR8EJ+8e9NiNvMo1pI00Lx/ntAnFZ JftWUJcMy3TQ5u1GkyfQN9y/yThX1bZK5GvmHS9SJ2Dkacaus5d+xaKCHtRuFS1I 7C6b8PsNgRczUMumBXus44HdlNfNs1yU3lvVxFvBIPE1qC9pYRHrkWIXXIocXLLC oxTEJ6B2G3BQZVQgLIA4fOaxMVhmvKffi/aEZLi9vN9VVosd1a6XNKI6KbyRnXFp GSs9qDqszhn5I3GYNlDNQTc/8UsRlhPFgS6nS0By6QnvxtGi9QkU2tBRBsXvqwCy cLoCYIhc2tvugHvld70dz26umiJ4rnmxGlobStNoigDvIKAIUt1UmIdr1so8P8eH xehnL9ZcOX6xnANDL0AqMFFHV6I58CJynhFdUoXfVQf/DWLGX48mpi9LVNsYBzsI CAwVOAQ0UjGrpdWmJ9ueY/ABYqg9vRjzaDEXQ+MhAYO55CLaVsg= =3tyT -----END PGP SIGNATURE----- Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs Pull header cleanups from Kent Overstreet: "The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies" * tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits) Kill sched.h dependency on rcupdate.h kill unnecessary thread_info.h include Kill unnecessary kernel.h include preempt.h: Kill dependency on list.h rseq: Split out rseq.h from sched.h LoongArch: signal.c: add header file to fix build error restart_block: Trim includes lockdep: move held_lock to lockdep_types.h sem: Split out sem_types.h uidgid: Split out uidgid_types.h seccomp: Split out seccomp_types.h refcount: Split out refcount_types.h uapi/linux/resource.h: fix include x86/signal: kill dependency on time.h syscall_user_dispatch.h: split out *_types.h mm_types_task.h: Trim dependencies Split out irqflags_types.h ipc: Kill bogus dependency on spinlock.h shm: Slim down dependencies workqueue: Split out workqueue_types.h ... |
||
Kent Overstreet
|
8b7787a543 |
plist: Split out plist_types.h
Trimming down sched.h dependencies: we don't want to include more than the base types. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
Randy Dunlap
|
a751ea34f8 |
init/Kconfig: move more items into the EXPERT menu
KCMP, RSEQ, CACHESTAT_SYSCALL, and PC104 depend on EXPERT but not shown in the EXPERT menu. Move some lines around so that they are displayed in the EXPERT menu. Drop one useless comment. Change "enabled" to "enable" for DEBUG_RSEQ. Link: https://lkml.kernel.org/r/20231208045819.2922-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexander Graf
|
2678fd2fe9 |
initramfs: Expose retained initrd as sysfs file
When the kernel command line option "retain_initrd" is set, we do not free the initrd memory. However, we also don't expose it to anyone for consumption. That leaves us in a weird situation where the only user of this feature is ppc64 and arm64 specific kexec tooling. To make it more generally useful, this patch adds a kobject to the firmware object that contains the initrd context when "retain_initrd" is set. That way, we can access the initrd any time after boot from user space and for example hand it into kexec as --initrd parameter if we want to reboot the same initrd. Or inspect it directly locally. With this patch applied, there is a new /sys/firmware/initrd file when the kernel was booted with an initrd and "retain_initrd" command line option is set. Signed-off-by: Alexander Graf <graf@amazon.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20231207235654.16622-1-graf@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Heiko Carstens
|
0eb5085c38 |
arch: remove ARCH_TASK_STRUCT_ON_STACK
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ON_STACK. IA-64 was removed with commit |
||
Stefan Berger
|
21528c69a0 |
rootfs: Fix support for rootfstype= when root= is given
Documentation/filesystems/ramfs-rootfs-initramfs.rst states:
If CONFIG_TMPFS is enabled, rootfs will use tmpfs instead of ramfs by
default. To force ramfs, add "rootfstype=ramfs" to the kernel command
line.
This currently does not work when root= is provided since then
saved_root_name contains a string and rootfstype= is ignored. Therefore,
ramfs is currently always chosen when root= is provided.
The current behavior for rootfs's filesystem is:
root= | rootfstype= | chosen rootfs filesystem
------------+-------------+--------------------------
unspecified | unspecified | tmpfs
unspecified | tmpfs | tmpfs
unspecified | ramfs | ramfs
provided | ignored | ramfs
rootfstype= should be respected regardless whether root= is given,
as shown below:
root= | rootfstype= | chosen rootfs filesystem
------------+-------------+--------------------------
unspecified | unspecified | tmpfs (as before)
unspecified | tmpfs | tmpfs (as before)
unspecified | ramfs | ramfs (as before)
provided | unspecified | ramfs (compatibility with before)
provided | tmpfs | tmpfs (new)
provided | ramfs | ramfs (new)
This table represents the new behavior.
Fixes:
|
||
Linus Torvalds
|
8f6f76a6a2 |
As usual, lots of singleton and doubleton patches all over the tree and
there's little I can say which isn't in the individual changelogs. The lengthier patch series are - "kdump: use generic functions to simplify crashkernel reservation in arch", from Baoquan He. This is mainly cleanups and consolidation of the "crashkernel=" kernel parameter handling. - After much discussion, David Laight's "minmax: Relax type checks in min() and max()" is here. Hopefully reduces some typecasting and the use of min_t() and max_t(). - A group of patches from Oleg Nesterov which clean up and slightly fix our handling of reads from /proc/PID/task/... and which remove task_struct.therad_group. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4 63BNcG3+hM9nwGJHb5lyh5m79nBMRg0= =On4u -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "As usual, lots of singleton and doubleton patches all over the tree and there's little I can say which isn't in the individual changelogs. The lengthier patch series are - 'kdump: use generic functions to simplify crashkernel reservation in arch', from Baoquan He. This is mainly cleanups and consolidation of the 'crashkernel=' kernel parameter handling - After much discussion, David Laight's 'minmax: Relax type checks in min() and max()' is here. Hopefully reduces some typecasting and the use of min_t() and max_t() - A group of patches from Oleg Nesterov which clean up and slightly fix our handling of reads from /proc/PID/task/... and which remove task_struct.thread_group" * tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits) scripts/gdb/vmalloc: disable on no-MMU scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n .mailmap: add address mapping for Tomeu Vizoso mailmap: update email address for Claudiu Beznea tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions .mailmap: map Benjamin Poirier's address scripts/gdb: add lx_current support for riscv ocfs2: fix a spelling typo in comment proc: test ProtectionKey in proc-empty-vm test proc: fix proc-empty-vm test with vsyscall fs/proc/base.c: remove unneeded semicolon do_io_accounting: use sig->stats_lock do_io_accounting: use __for_each_thread() ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error() ocfs2: fix a typo in a comment scripts/show_delta: add __main__ judgement before main code treewide: mark stuff as __ro_after_init fs: ocfs2: check status values proc: test /proc/${pid}/statm compiler.h: move __is_constexpr() to compiler.h ... |
||
Linus Torvalds
|
426ee5196d |
sysctl-6.7-rc1
To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last 2 patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmVCqKsSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinEgYQAIpkqRL85DBwems19Uk9A27lkctwZ6Fc HdslQCObQTsbuKVimZFP4IL2beUfUE0cfLZCXlzp+4nRDOf6vyhyf3w19jPQtI0Q YdqwTk9y6G5VjDsb35QK0+UBloY/kZ1H3/LW4uCwjXTuksUGmWW2Qvey35696Scv hDMLADqKQmdpYxLUaNi9QyYbEAjYtOai2ezg3+i7hTG168t1k/Ab2BxIFrPVsCR2 FAiq05L4ugWjNskdsWBjck05JZsx9SK/qcAxpIPoUm4nGiFNHApXE0E0hs3vsnmn WIHIbxCQw8ZlUDlmw4S+0YH3NFFzFbWfmW8k2b0f2qZTJm/rU4KiJfcJVknkAUVF raFox6XDW0AUQ9L/NOUJ9ip5rup57GcFrMYocdJ3PPAvvmHKOb1D1O741p75RRcc 9j7zwfIRrzjPUqzhsQS/GFjdJu3lJNmEBK1AcgrVry6WoItrAzJHKPPDC7TwaNmD eXpjxMl1sYzzHqtVh4hn+xkUYphj/6gTGMV8zdo+/FopFswgeJW9G8kHtlEWKDPk MRIKwACmfetP6f3ngHunBg+BOipbjCANL7JI0nOhVOQoaULxCCPx+IPJ6GfSyiuH AbcjH8DGI7fJbUkBFoF0dsRFZ2gH8ds1PYMbWUJ6x3FtuCuv5iIuvQYoaWU6itm7 6f0KvCogg0fU =Qf50 -----END PGP SIGNATURE----- Merge tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last two patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now" * tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits) watchdog: move softlockup_panic back to early_param proc: sysctl: prevent aliased sysctls from getting passed to init intel drm: Remove now superfluous sentinel element from ctl_table array Drivers: hv: Remove now superfluous sentinel element from ctl_table array raid: Remove now superfluous sentinel element from ctl_table array fw loader: Remove the now superfluous sentinel element from ctl_table array sgi-xp: Remove the now superfluous sentinel element from ctl_table array vrf: Remove the now superfluous sentinel element from ctl_table array char-misc: Remove the now superfluous sentinel element from ctl_table array infiniband: Remove the now superfluous sentinel element from ctl_table array macintosh: Remove the now superfluous sentinel element from ctl_table array parport: Remove the now superfluous sentinel element from ctl_table array scsi: Remove now superfluous sentinel element from ctl_table array tty: Remove now superfluous sentinel element from ctl_table array xen: Remove now superfluous sentinel element from ctl_table array hpet: Remove now superfluous sentinel element from ctl_table array c-sky: Remove now superfluous sentinel element from ctl_talbe array powerpc: Remove now superfluous sentinel element from ctl_table arrays riscv: Remove now superfluous sentinel element from ctl_table array x86/vdso: Remove now superfluous sentinel element from ctl_table array ... |
||
Linus Torvalds
|
1e0c505e13 |
asm-generic updates for v6.7
The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC40IACgkQYKtH/8kJ Uidhmw/9EX+aWSXGoObJ3fngaNSMw+PmrEuP8qEKBHxfKHcCdX3hc451Oh4GlhaQ tru91pPwgNvN2/rfoKusxT+V4PemGIzfNni/04rp+P0kvmdw5otQ2yNhsQNsfVmq XGWvkxF4P2GO6bkjjfR/1dDq7GtlyXtwwPDKeLbYb6TnJOZjtx+EAN27kkfSn1Ms R4Sa3zJ+DfHUmHL5S9g+7UD/CZ5GfKNmIskI4Mz5GsfoUz/0iiU+Bge/9sdcdSJQ kmbLy5YnVzfooLZ3TQmBFsO3iAMWb0s/mDdtyhqhTVmTUshLolkPYyKnPFvdupyv shXcpEST2XJNeaDRnL2K4zSCdxdbnCZHDpjfl9wfioBg7I8NfhXKpf1jYZHH1de4 LXq8ndEFEOVQw/zSpYWfQq1sux8Jiqr+UK/ukbVeFWiGGIUs91gEWtPAf8T0AZo9 ujkJvaWGl98O1g5wmBu0/dAR6QcFJMDfVwbmlIFpU8O+MEaz6X8mM+O5/T0IyTcD eMbAUjj4uYcU7ihKzHEv/0SS9Of38kzff67CLN5k8wOP/9NlaGZ78o1bVle9b52A BdhrsAefFiWHp1jT6Y9Rg4HOO/TguQ9e6EWSKOYFulsiLH9LEFaB9RwZLeLytV0W vlAgY9rUW77g1OJcb7DoNv33nRFuxsKqsnz3DEIXtgozo9CzbYI= =H1vH -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture |
||
Krister Johansen
|
8001f49394 |
proc: sysctl: prevent aliased sysctls from getting passed to init
The code that checks for unknown boot options is unaware of the sysctl
alias facility, which maps bootparams to sysctl values. If a user sets
an old value that has a valid alias, a message about an invalid
parameter will be printed during boot, and the parameter will get passed
to init. Fix by checking for the existence of aliased parameters in the
unknown boot parameter code. If an alias exists, don't return an error
or pass the value to init.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes:
|
||
Linus Torvalds
|
befaa609f4 |
hardening updates for v6.7-rc1
- Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmU/3cUWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJsEoEACBGPSiOmfSWdH3TOnIG270PD24 jGjg8KFv7RC/JTOdYmpLl0okdlGT9LvjN/ToSSDEw3PIayxoXUdhkbYy0MYtiV3m yz2ozDTzJuplQX/W2fPE+nXSzIwHao2zjPPFjHnT7lt8IIjhgjiOtLfZ2gGUkW99 Mdu2aWh3u0r4tC8OS23++yN5ibRc5l72efsjDWjZ0aPXnxE1bjmLMiIPiizpndIf beasPuDBs98sJVYouemCwnsPXuXOPz3Q1Cpo/fTd+TMTJCLSemCQZCTuOBU0acI/ ZjLCgCaJU1yIYKBMtrIN4G9kITZniXX3/Nm4o6NQMVlcCqMeNaHuflomqWoqWfhE UPbRo2eghZOaMNiCKLLvZDIqPrh1IcsiEl6Ef3W4hICc42GTK96IuGisIvDXwQ4N /SzTOupJuN42noh3z1M3XuZy5RoXJ99IYDNY5CTKf9IdqvA0bbGkU3nb1gZH/xw9 BjTqKzR/7K1kTXuSgagDZ1Wceej9pZxhX7E3IHYsP8ZOvKug3EeL4yybVwQ3HRfq Qnzcp/qPB9cOkLSQXveRTFTsj2mX28Gixct/iDuc1jIYwGQlY1gI6dcUcqby6ptM BrQti7eR2NH2+T3aE2UVCIWsZVhx7NaSF+z8JxfAuu56jicc4xJVsi8zrNveWX5M m2VXyBl3121BVtKi4w== =0iVF -----END PGP SIGNATURE----- Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ... |
||
Linus Torvalds
|
f84a52eef5 |
- A bunch of improvements, cleanups and fixlets to the SRSO mitigation
machinery and other, general cleanups to the hw mitigations code, by Josh Poimboeuf - Improve the return thunk detection by objtool as it is absolutely important that the default return thunk is not used after returns have been patched. Future work to detect and report this better is pending - Other misc cleanups and fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmU7mFEACgkQEsHwGGHe VUpbBxAAtS4X5LCntPWUsDEBU80SBYAunEp0Wd0ttYEj+UrEk4tvnWVGFiIEr47A PrRKK9JCJtC6ko0+dwPtMi66L/T7mCpoNPI1kzfRG1IHJBfvCTGJhzZsesogvkA2 1X9Je+RCVW4xVybIryxhjMGdB6jUoGEU1a4DmQXq481qiLB3ilvA1bIAaNo9BBYP rxKPrPcdOxn2NjxuOWg+FXjSc8LuAVSu3HqsgCW2AHJ6XIKEYWEq9FkXhwj9OJOr ax1F4qD1IY++jYZO9DJiltjeJyj0wC+yp8kDDURoLbcTk85WHlpD5vK0g64mELOA y0375thHep+vsrtQ/qZAmi/eVTaTekgbi7McahjoZebK7FbKOYRk6GZ+5+m29AVr DfQSJ7xQQqbCbpimeFmZ+gQf7mFexyDWvjUPyBl+OelOY1umdPM9IZVTnqib5LPr D2M+uqWfJhSwACi2o05LRv0gyhkAz0bGHrwZPmCVuxE5kBbhOpj4aT87fetUp/MW 8lEFa3PHx/gkh2VOJ7ZgKzpeD75Vjo8TRAXOe4O2jn/L54gNEJ+1mukvrjW3+lp1 ShmcZokl3ldPq6F5ioE+u45hVAfHkaruWM+5Rj3hsA/fdFN3isTVLhIRIsypPTKc p1ITT8Yhek8vkm9PcRBE5xWRmEZ2XE5ooDld930nJxra8QNVVQw= =E7c4 -----END PGP SIGNATURE----- Merge tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 hw mitigation updates from Borislav Petkov: - A bunch of improvements, cleanups and fixlets to the SRSO mitigation machinery and other, general cleanups to the hw mitigations code, by Josh Poimboeuf - Improve the return thunk detection by objtool as it is absolutely important that the default return thunk is not used after returns have been patched. Future work to detect and report this better is pending - Other misc cleanups and fixes * tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/retpoline: Document some thunk handling aspects x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN x86/callthunks: Delete unused "struct thunk_desc" x86/vdso: Run objtool on vdso32-setup.o objtool: Fix return thunk patching in retpolines x86/srso: Remove unnecessary semicolon x86/pti: Fix kernel warnings for pti= and nopti cmdline options x86/calldepth: Rename __x86_return_skl() to call_depth_return_thunk() x86/nospec: Refactor UNTRAIN_RET[_*] x86/rethunk: Use SYM_CODE_START[_LOCAL]_NOALIGN macros x86/srso: Disentangle rethunk-dependent options x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block x86/bugs: Remove default case for fully switched enums x86/srso: Remove 'pred_cmd' label x86/srso: Unexport untraining functions x86/srso: Improve i-cache locality for alias mitigation x86/srso: Fix unret validation dependencies x86/srso: Fix vulnerability reporting for missing microcode x86/srso: Print mitigation for retbleed IBPB case x86/srso: Print actual mitigation if requested mitigation isn't possible ... |
||
Linus Torvalds
|
9e87705289 |
Initial bcachefs pull request for 6.7-rc1
Here's the bcachefs filesystem pull request. One new patch since last week: the exportfs constants ended up conflicting with other filesystems that are also getting added to the global enum, so switched to new constants picked by Amir. I'll also be sending another pull request later on in the cycle bringing things up to date my master branch that people are currently running; that will be restricted to fs/bcachefs/, naturally. Testing - fstests as well as the bcachefs specific tests in ktest: https://evilpiepirate.org/~testdashboard/ci?branch=bcachefs-for-upstream It's also been soaking in linux-next, which resulted in a whole bunch of smatch complaints and fixes and a patch or two from Kees. The only new non fs/bcachefs/ patch is the objtool patch that adds bcachefs functions to the list of noreturns. The patch that exports osq_lock() has been dropped for now, per Ingo. Prereq patch list: |
||
Josh Poimboeuf
|
2d7ce49f58 |
x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN
Enabling CONFIG_KCSAN leads to unconverted, default return thunks to remain after patching. As David Kaplan describes in his debugging of the issue, it is caused by a couple of KCSAN-generated constructors which aren't processed by objtool: "When KCSAN is enabled, GCC generates lots of constructor functions named _sub_I_00099_0 which call __tsan_init and then return. The returns in these are generally annotated normally by objtool and fixed up at runtime. But objtool runs on vmlinux.o and vmlinux.o does not include a couple of object files that are in vmlinux, like init/version-timestamp.o and .vmlinux.export.o, both of which contain _sub_I_00099_0 functions. As a result, the returns in these functions are not annotated, and the panic occurs when we call one of them in do_ctors and it uses the default return thunk. This difference can be seen by counting the number of these functions in the object files: $ objdump -d vmlinux.o|grep -c "<_sub_I_00099_0>:" 2601 $ objdump -d vmlinux|grep -c "<_sub_I_00099_0>:" 2603 If these functions are only run during kernel boot, there is no speculation concern." Fix it by disabling KCSAN on version-timestamp.o and .vmlinux.export.o so the extra functions don't get generated. KASAN and GCOV are already disabled for those files. [ bp: Massage commit message. ] Closes: https://lore.kernel.org/lkml/20231016214810.GA3942238@dev-arch.thelio-3990X/ Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Marco Elver <elver@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20231017165946.v4i2d4exyqwqq3bx@treble |
||
Jianyong Wu
|
84d2b69623
|
init/mount: print pretty name of root device when panics
Given a wrong root device, current log may not give the pretty name which is useful to locate root cause. For example, there are 2 blk devs in a VM, /dev/vda which has 2 partitials /dev/vda1 and /dev/vda2 and /dev/vdb which is blank. /dev/vda2 is the right root dev. When set "root=/dev/vdb", we get error log: [ 0.635575] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,16) It's not straightforward to find out the root cause as there is lack of the root devive name therefore hard for people to get those info from the device number, in the example, (254,16). It is more comprehensive way to hint the root cause if pretty name is given here, like: [ 0.559887] Kernel panic - not syncing: VFS: Unable to mount root fs on "/dev/vdb" or unknown-block(254,16) Signed-off-by: Jianyong Wu <jianyong.wu@arm.com> Message-Id: <20230907091025.3436878-1-jianyong.wu@arm.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Oleg Nesterov
|
8e1f385104 |
kill task_struct->thread_group
The last user was removed by the previous patch. Link: https://lkml.kernel.org/r/20230826111409.GA23243@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Azeem Shaikh
|
8ebab155ea |
init/version.c: Replace strlcpy with strscpy
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since return value of -errno is used to check for truncation instead of sizeof(dest). [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230830160806.3821893-1-azeemshaikh38@gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> |
||
Kent Overstreet
|
2b69987be5 |
sched: Add task_struct->faults_disabled_mapping
There has been a long standing page cache coherence bug with direct IO. This provides part of a mechanism to fix it, currently just used by bcachefs but potentially worth promoting to the VFS. Direct IO evicts the range of the pagecache being read or written to. For reads, we need dirty pages to be written to disk, so that the read doesn't return stale data. For writes, we need to evict that range of the pagecache so that it's not stale after the write completes. However, without a locking mechanism to prevent those pages from being re-added to the pagecache - by a buffered read or page fault - page cache inconsistency is still possible. This isn't necessarily just an issue for userspace when they're playing games; filesystems may hang arbitrary state off the pagecache, and so page cache inconsistency may cause real filesystem bugs, depending on the filesystem. This is less of an issue for iomap based filesystems, but e.g. buffer heads caches disk block mappings (!) and attaches them to the pagecache, and bcachefs attaches disk reservations to pagecache pages. This issue has been hard to fix, because - we need to add a lock (henceforth called pagecache_add_lock), which would be held for the duration of the direct IO - page faults add pages to the page cache, thus need to take the same lock - dio -> gup -> page fault thus can deadlock And we cannot enforce a lock ordering with this lock, since userspace will be controlling the lock ordering (via the fd and buffer arguments to direct IOs), so we need a different method of deadlock avoidance. We need to tell the page fault handler that we're already holding a pagecache_add_lock, and since plumbing it through the entire gup() path would be highly impractical this adds a field to task_struct. Then the full method is: - in the dio path, when we first take the pagecache_add_lock, note the mapping in the current task_struct - in the page fault handler, if faults_disabled_mapping is set, we check if it's the same mapping as the one we're taking a page fault for, and if so return an error. Then we check lock ordering: if there's a lock ordering violation and trylock fails, we'll have to cycle the locks and return an error that tells the DIO path to retry: faults_disabled_mapping is also used for signalling "locks were dropped, please retry". Also relevant to this patch: mapping->invalidate_lock. mapping->invalidate_lock provides most of the required semantics - it's used by truncate/fallocate to block pages being added to the pagecache. However, since it's a rwsem, direct IOs would need to take the write side in order to block page cache adds, and would then be exclusive with each other - we'll need a new type of lock to pair with this approach. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Cc: Jan Kara <jack@suse.cz> Cc: Darrick J. Wong <djwong@kernel.org> Cc: linux-fsdevel@vger.kernel.org Cc: Andreas Grünbacher <andreas.gruenbacher@gmail.com> |
||
Ard Biesheuvel
|
cf8e865810 |
arch: Remove Itanium (IA-64) architecture
The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
Linus Torvalds
|
bd30fe6a7d |
workqueue: Changes for v6.6
* Unbound workqueues now support more flexible affinity scopes. The default behavior is to soft-affine according to last level cache boundaries. A work item queued from a given LLC is executed by a worker running on the same LLC but the worker may be moved across cache boundaries as the scheduler sees fit. On machines which multiple L3 caches, which are becoming more popular along with chiplet designs, this improves cache locality while not harming work conservation too much. Unbound workqueues are now also a lot more flexible in terms of execution affinity. Differeing levels of affinity scopes are supported and both the default and per-workqueue affinity settings can be modified dynamically. This should help working around amny of sub-optimal behaviors observed recently with asymmetric ARM CPUs. This involved signficant restructuring of workqueue code. Nothing was reported yet but there's some risk of subtle regressions. Should keep an eye out. * Rescuer workers now has more identifiable comms. * workqueue.unbound_cpus added so that CPUs which can be used by workqueue can be constrained early during boot. * Now that all the in-tree users have been flushed out, trigger warning if system-wide workqueues are flushed. * One pull commit from for-6.5-fixes to avoid cascading conflicts in the affinity scope patchset. -----BEGIN PGP SIGNATURE----- iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZPERlQ4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGVqQAPwIOy9tWY5jFAmMuIyH6wV50hbmfxCc2n5xhQNr 5HoyGgEA8lw1W7afDCIPiQVA7AYsu8dhwuNSOcRCJxhrrn4XsA0= =g/Uu -----END PGP SIGNATURE----- Merge tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue updates from Tejun Heo: - Unbound workqueues now support more flexible affinity scopes. The default behavior is to soft-affine according to last level cache boundaries. A work item queued from a given LLC is executed by a worker running on the same LLC but the worker may be moved across cache boundaries as the scheduler sees fit. On machines which multiple L3 caches, which are becoming more popular along with chiplet designs, this improves cache locality while not harming work conservation too much. Unbound workqueues are now also a lot more flexible in terms of execution affinity. Differeing levels of affinity scopes are supported and both the default and per-workqueue affinity settings can be modified dynamically. This should help working around amny of sub-optimal behaviors observed recently with asymmetric ARM CPUs. This involved signficant restructuring of workqueue code. Nothing was reported yet but there's some risk of subtle regressions. Should keep an eye out. - Rescuer workers now has more identifiable comms. - workqueue.unbound_cpus added so that CPUs which can be used by workqueue can be constrained early during boot. - Now that all the in-tree users have been flushed out, trigger warning if system-wide workqueues are flushed. * tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (31 commits) workqueue: fix data race with the pwq->stats[] increment workqueue: Rename rescuer kworker workqueue: Make default affinity_scope dynamically updatable workqueue: Add "Affinity Scopes and Performance" section to documentation workqueue: Implement non-strict affinity scope for unbound workqueues workqueue: Add workqueue_attrs->__pod_cpumask workqueue: Factor out need_more_worker() check and worker wake-up workqueue: Factor out work to worker assignment and collision handling workqueue: Add multiple affinity scopes and interface to select them workqueue: Modularize wq_pod_type initialization workqueue: Add tools/workqueue/wq_dump.py which prints out workqueue configuration workqueue: Generalize unbound CPU pods workqueue: Factor out clearing of workqueue-only attrs fields workqueue: Factor out actual cpumask calculation to reduce subtlety in wq_update_pod() workqueue: Initialize unbound CPU pods later in the boot workqueue: Move wq_pod_init() below workqueue_init() workqueue: Rename NUMA related names to use pod instead workqueue: Rename workqueue_attrs->no_numa to ->ordered workqueue: Make unbound workqueues to use per-cpu pool_workqueues workqueue: Call wq_update_unbound_numa() on all CPUs in NUMA node on CPU hotplug ... |
||
Linus Torvalds
|
d68b4b6f30 |
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options"). - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h"). - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands"). - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions"). - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug"). - Many singleton patches to various parts of the tree -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy QHy7lL0Syha38kKLMXTM+bN6YQHi9AU= =WJQa -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options") - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h") - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands") - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions") - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug") - Many singleton patches to various parts of the tree * tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits) document while_each_thread(), change first_tid() to use for_each_thread() drivers/char/mem.c: shrink character device's devlist[] array x86/crash: optimize CPU changes crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() crash: hotplug support for kexec_load() x86/crash: add x86 crash hotplug support crash: memory and CPU hotplug sysfs attributes kexec: exclude elfcorehdr from the segment digest crash: add generic infrastructure for crash hotplug support crash: move a few code bits to setup support of crash hotplug kstrtox: consistently use _tolower() kill do_each_thread() nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse scripts/bloat-o-meter: count weak symbol sizes treewide: drop CONFIG_EMBEDDED lockdep: fix static memory detection even more lib/vsprintf: declare no_hash_pointers in sprintf.h lib/vsprintf: split out sprintf() and friends kernel/fork: stop playing lockless games for exe_file replacement adfs: delete unused "union adfs_dirtail" definition ... |
||
Linus Torvalds
|
b96a3e9142 |
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which reduces the special-case code for handling hugetlb pages in GUP. It also speeds up GUP handling of transparent hugepages. - Peng Zhang provides some maple tree speedups ("Optimize the fast path of mas_store()"). - Sergey Senozhatsky has improved te performance of zsmalloc during compaction (zsmalloc: small compaction improvements"). - Domenico Cerasuolo has developed additional selftest code for zswap ("selftests: cgroup: add zswap test program"). - xu xin has doe some work on KSM's handling of zero pages. These changes are mainly to enable the user to better understand the effectiveness of KSM's treatment of zero pages ("ksm: support tracking KSM-placed zero-pages"). - Jeff Xu has fixes the behaviour of memfd's MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED"). - David Howells has fixed an fscache optimization ("mm, netfs, fscache: Stop read optimisation when folio removed from pagecache"). - Axel Rasmussen has given userfaultfd the ability to simulate memory poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD"). - Miaohe Lin has contributed some routine maintenance work on the memory-failure code ("mm: memory-failure: remove unneeded PageHuge() check"). - Peng Zhang has contributed some maintenance work on the maple tree code ("Improve the validation for maple tree and some cleanup"). - Hugh Dickins has optimized the collapsing of shmem or file pages into THPs ("mm: free retracted page table by RCU"). - Jiaqi Yan has a patch series which permits us to use the healthy subpages within a hardware poisoned huge page for general purposes ("Improve hugetlbfs read on HWPOISON hugepages"). - Kemeng Shi has done some maintenance work on the pagetable-check code ("Remove unused parameters in page_table_check"). - More folioification work from Matthew Wilcox ("More filesystem folio conversions for 6.6"), ("Followup folio conversions for zswap"). And from ZhangPeng ("Convert several functions in page_io.c to use a folio"). - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext"). - Baoquan He has converted some architectures to use the GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take GENERIC_IOREMAP way"). - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support batched/deferred tlb shootdown during page reclamation/migration"). - Better maple tree lockdep checking from Liam Howlett ("More strict maple tree lockdep"). Liam also developed some efficiency improvements ("Reduce preallocations for maple tree"). - Cleanup and optimization to the secondary IOMMU TLB invalidation, from Alistair Popple ("Invalidate secondary IOMMU TLB on permission upgrade"). - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes for arm64"). - Kemeng Shi provides some maintenance work on the compaction code ("Two minor cleanups for compaction"). - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most file-backed faults under the VMA lock"). - Aneesh Kumar contributes code to use the vmemmap optimization for DAX on ppc64, under some circumstances ("Add support for DAX vmemmap optimization for ppc64"). - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client data in page_ext"), ("minor cleanups to page_ext header"). - Some zswap cleanups from Johannes Weiner ("mm: zswap: three cleanups"). - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan"). - VMA handling cleanups from Kefeng Wang ("mm: convert to vma_is_initial_heap/stack()"). - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes: implement DAMOS tried total bytes file"), ("Extend DAMOS filters for address ranges and DAMON monitoring targets"). - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction"). - Liam Howlett has improved the maple tree node replacement code ("maple_tree: Change replacement strategy"). - ZhangPeng has a general code cleanup - use the K() macro more widely ("cleanup with helper macro K()"). - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap on memory feature on ppc64"). - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list in page_alloc"), ("Two minor cleanups for get pageblock migratetype"). - Vishal Moola introduces a memory descriptor for page table tracking, "struct ptdesc" ("Split ptdesc from struct page"). - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups for vm.memfd_noexec"). - MM include file rationalization from Hugh Dickins ("arch: include asm/cacheflush.h in asm/hugetlb.h"). - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text output"). - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use object_cache instead of kmemleak_initialized"). - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor and _folio_order"). - A VMA locking scalability improvement from Suren Baghdasaryan ("Per-VMA lock support for swap and userfaults"). - pagetable handling cleanups from Matthew Wilcox ("New page table range API"). - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop using page->private on tail pages for THP_SWAP + cleanups"). - Cleanups and speedups to the hugetlb fault handling from Matthew Wilcox ("Change calling convention for ->huge_fault"). - Matthew Wilcox has also done some maintenance work on the MM subsystem documentation ("Improve mm documentation"). -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6 Nfio7afS1ncD+hPYT8947UnLxTgn+ww= =Afws -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list") - Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which reduces the special-case code for handling hugetlb pages in GUP. It also speeds up GUP handling of transparent hugepages. - Peng Zhang provides some maple tree speedups ("Optimize the fast path of mas_store()"). - Sergey Senozhatsky has improved te performance of zsmalloc during compaction (zsmalloc: small compaction improvements"). - Domenico Cerasuolo has developed additional selftest code for zswap ("selftests: cgroup: add zswap test program"). - xu xin has doe some work on KSM's handling of zero pages. These changes are mainly to enable the user to better understand the effectiveness of KSM's treatment of zero pages ("ksm: support tracking KSM-placed zero-pages"). - Jeff Xu has fixes the behaviour of memfd's MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED"). - David Howells has fixed an fscache optimization ("mm, netfs, fscache: Stop read optimisation when folio removed from pagecache"). - Axel Rasmussen has given userfaultfd the ability to simulate memory poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD"). - Miaohe Lin has contributed some routine maintenance work on the memory-failure code ("mm: memory-failure: remove unneeded PageHuge() check"). - Peng Zhang has contributed some maintenance work on the maple tree code ("Improve the validation for maple tree and some cleanup"). - Hugh Dickins has optimized the collapsing of shmem or file pages into THPs ("mm: free retracted page table by RCU"). - Jiaqi Yan has a patch series which permits us to use the healthy subpages within a hardware poisoned huge page for general purposes ("Improve hugetlbfs read on HWPOISON hugepages"). - Kemeng Shi has done some maintenance work on the pagetable-check code ("Remove unused parameters in page_table_check"). - More folioification work from Matthew Wilcox ("More filesystem folio conversions for 6.6"), ("Followup folio conversions for zswap"). And from ZhangPeng ("Convert several functions in page_io.c to use a folio"). - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext"). - Baoquan He has converted some architectures to use the GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take GENERIC_IOREMAP way"). - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support batched/deferred tlb shootdown during page reclamation/migration"). - Better maple tree lockdep checking from Liam Howlett ("More strict maple tree lockdep"). Liam also developed some efficiency improvements ("Reduce preallocations for maple tree"). - Cleanup and optimization to the secondary IOMMU TLB invalidation, from Alistair Popple ("Invalidate secondary IOMMU TLB on permission upgrade"). - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes for arm64"). - Kemeng Shi provides some maintenance work on the compaction code ("Two minor cleanups for compaction"). - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most file-backed faults under the VMA lock"). - Aneesh Kumar contributes code to use the vmemmap optimization for DAX on ppc64, under some circumstances ("Add support for DAX vmemmap optimization for ppc64"). - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client data in page_ext"), ("minor cleanups to page_ext header"). - Some zswap cleanups from Johannes Weiner ("mm: zswap: three cleanups"). - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan"). - VMA handling cleanups from Kefeng Wang ("mm: convert to vma_is_initial_heap/stack()"). - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes: implement DAMOS tried total bytes file"), ("Extend DAMOS filters for address ranges and DAMON monitoring targets"). - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction"). - Liam Howlett has improved the maple tree node replacement code ("maple_tree: Change replacement strategy"). - ZhangPeng has a general code cleanup - use the K() macro more widely ("cleanup with helper macro K()"). - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap on memory feature on ppc64"). - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list in page_alloc"), ("Two minor cleanups for get pageblock migratetype"). - Vishal Moola introduces a memory descriptor for page table tracking, "struct ptdesc" ("Split ptdesc from struct page"). - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups for vm.memfd_noexec"). - MM include file rationalization from Hugh Dickins ("arch: include asm/cacheflush.h in asm/hugetlb.h"). - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text output"). - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use object_cache instead of kmemleak_initialized"). - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor and _folio_order"). - A VMA locking scalability improvement from Suren Baghdasaryan ("Per-VMA lock support for swap and userfaults"). - pagetable handling cleanups from Matthew Wilcox ("New page table range API"). - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop using page->private on tail pages for THP_SWAP + cleanups"). - Cleanups and speedups to the hugetlb fault handling from Matthew Wilcox ("Change calling convention for ->huge_fault"). - Matthew Wilcox has also done some maintenance work on the MM subsystem documentation ("Improve mm documentation"). * tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits) maple_tree: shrink struct maple_tree maple_tree: clean up mas_wr_append() secretmem: convert page_is_secretmem() to folio_is_secretmem() nios2: fix flush_dcache_page() for usage from irq context hugetlb: add documentation for vma_kernel_pagesize() mm: add orphaned kernel-doc to the rst files. mm: fix clean_record_shared_mapping_range kernel-doc mm: fix get_mctgt_type() kernel-doc mm: fix kernel-doc warning from tlb_flush_rmaps() mm: remove enum page_entry_size mm: allow ->huge_fault() to be called without the mmap_lock held mm: move PMD_ORDER to pgtable.h mm: remove checks for pte_index memcg: remove duplication detection for mem_cgroup_uncharge_swap mm/huge_memory: work on folio->swap instead of page->private when splitting folio mm/swap: inline folio_set_swap_entry() and folio_swap_entry() mm/swap: use dedicated entry for swap in folio mm/swap: stop using page->private on tail pages for THP_SWAP selftests/mm: fix WARNING comparing pointer to 0 selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check ... |
||
Linus Torvalds
|
3ca9a836ff |
Scheduler changes for v6.6:
- The biggest change is introduction of a new iteration of the SCHED_FAIR interactivity code: the EEVDF ("Earliest Eligible Virtual Deadline First") scheduler. EEVDF too is a virtual-time scheduler, with two parameters (weight and relative deadline), compared to CFS that had weight only. It completely reworks the base scheduler: placement, preemption, picking -- everything. LWN.net, as usual, has a terrific writeup about EEVDF: https://lwn.net/Articles/925371/ Preemption (both tick and wakeup) is driven by testing against a fresh pick. Because the tree is now effectively an interval tree, and the selection is no longer the 'leftmost' task, over-scheduling is less of a problem. A lot of the CFS heuristics are removed or replaced by more natural latency-space parameters & constructs. In terms of expected performance regressions: we'll and can fix everything where a 'good' workload misbehaves with the new scheduler, but EEVDF inevitably changes workload scheduling in a binary fashion, hopefully for the better in the overwhelming majority of cases, but in some cases it won't, especially in adversarial loads that got lucky with the previous code, such as some variants of hackbench. We are trying hard to err on the side of fixing all performance regressions, but we expect some inevitable post-release iterations of that process. - Improve load-balancing on hybrid x86 systems: enable cluster scheduling (again). - Improve & fix bandwidth-scheduling on nohz systems. - Improve bandwidth-throttling. - Use lock guards to simplify and de-goto-ify control flow. - Misc improvements, cleanups and fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmTtDOgRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iS4g//b9yewVW9OPxetKoN8zIJA0TjFYuuOVHK BlCJi5dbzXeCTrtENI65BRA7kPbTQ3AjwLRQ2BallAZ4dJceK0RhlZJvcrMNsm4e Adcpoch/FbqPKCrtAJQY04Ln1B244n/KyVifYett9220dMgTFQGJJYxrTc2G2+Kp F44vdUHzRczIE+KeOgBild1CwfKv5Zn5xgaXgtuoPLZtWBE0C1fSSzbK/PTINcUx bS4NVxK0CpOqSiNjnugV8KsYb71/0U6IgShBVjfHsrlBYigOH2NbVTH5xyjF8f83 WxiGstlhxj+N6Kv4L6FOJIAr2BIggH82j3FaPACmv4c8pzEoBBbvlAJkfinLEgbn Povg3OF2t6uZ8NoHjeu3WxOjBsphbpkFz7H5nno1ibXSIR/JyUH5MdBPSx93QITB QoUKQpr/L8zWauWDOEzSaJjEsZbl8rkcIVq5Bk0bR3qn2xkZsIeVte+vCEu3+tBc b4JOZjq7AuPDqPnsBLvuyiFZ7zwsAfm+pOD5UF3/zbLjPn1N/7wTNQZ29zjc04jl SifpCZGgF1KlG8m8wNTlSfVvq0ksppCzJt+C6VFuejZ191IGpirQHn4Vp0sluMhC WRzXhb7v37Bq5JY10GMfeKb/jAiRs68kozhzqVPsBSAPS6I6jJssONgedq+LbQdC tFsmE9n09do= =XtCD -----END PGP SIGNATURE----- Merge tag 'sched-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - The biggest change is introduction of a new iteration of the SCHED_FAIR interactivity code: the EEVDF ("Earliest Eligible Virtual Deadline First") scheduler EEVDF too is a virtual-time scheduler, with two parameters (weight and relative deadline), compared to CFS that had weight only. It completely reworks the base scheduler: placement, preemption, picking -- everything LWN.net, as usual, has a terrific writeup about EEVDF: https://lwn.net/Articles/925371/ Preemption (both tick and wakeup) is driven by testing against a fresh pick. Because the tree is now effectively an interval tree, and the selection is no longer the 'leftmost' task, over-scheduling is less of a problem. A lot of the CFS heuristics are removed or replaced by more natural latency-space parameters & constructs In terms of expected performance regressions: we will and can fix everything where a 'good' workload misbehaves with the new scheduler, but EEVDF inevitably changes workload scheduling in a binary fashion, hopefully for the better in the overwhelming majority of cases, but in some cases it won't, especially in adversarial loads that got lucky with the previous code, such as some variants of hackbench. We are trying hard to err on the side of fixing all performance regressions, but we expect some inevitable post-release iterations of that process - Improve load-balancing on hybrid x86 systems: enable cluster scheduling (again) - Improve & fix bandwidth-scheduling on nohz systems - Improve bandwidth-throttling - Use lock guards to simplify and de-goto-ify control flow - Misc improvements, cleanups and fixes * tag 'sched-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits) sched/eevdf/doc: Modify the documented knob to base_slice_ns as well sched/eevdf: Curb wakeup-preemption sched: Simplify sched_core_cpu_{starting,deactivate}() sched: Simplify try_steal_cookie() sched: Simplify sched_tick_remote() sched: Simplify sched_exec() sched: Simplify ttwu() sched: Simplify wake_up_if_idle() sched: Simplify: migrate_swap_stop() sched: Simplify sysctl_sched_uclamp_handler() sched: Simplify get_nohz_timer_target() sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset sched/rt: Fix sysctl_sched_rr_timeslice intial value sched/fair: Block nohz tick_stop when cfs bandwidth in use sched, cgroup: Restore meaning to hierarchical_quota MAINTAINERS: Add Peter explicitly to the psi section sched/psi: Select KERNFS as needed sched/topology: Align group flags when removing degenerate domain sched/fair: remove util_est boosting sched/fair: Propagate enqueue flags into place_entity() ... |
||
Randy Dunlap
|
ef815d2cba |
treewide: drop CONFIG_EMBEDDED
There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd). Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [RISC-V] Acked-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Brian Cain <bcain@quicinc.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Eric DeVolder
|
89cde45591 |
kexec: consolidate kexec and crash options into kernel/Kconfig.kexec
Patch series "refactor Kconfig to consolidate KEXEC and CRASH options", v6. The Kconfig is refactored to consolidate KEXEC and CRASH options from various arch/<arch>/Kconfig files into new file kernel/Kconfig.kexec. The Kconfig.kexec is now a submenu titled "Kexec and crash features" located under "General Setup". The following options are impacted: - KEXEC - KEXEC_FILE - KEXEC_SIG - KEXEC_SIG_FORCE - KEXEC_IMAGE_VERIFY_SIG - KEXEC_BZIMAGE_VERIFY_SIG - KEXEC_JUMP - CRASH_DUMP Over time, these options have been copied between Kconfig files and are very similar to one another, but with slight differences. The following architectures are impacted by the refactor (because of use of one or more KEXEC/CRASH options): - arm - arm64 - ia64 - loongarch - m68k - mips - parisc - powerpc - riscv - s390 - sh - x86 More information: In the patch series "crash: Kernel handling of CPU and memory hot un/plug" https://lore.kernel.org/lkml/20230503224145.7405-1-eric.devolder@oracle.com/ the new kernel feature introduces the config option CRASH_HOTPLUG. In reviewing, Thomas Gleixner requested that the new config option not be placed in x86 Kconfig. Rather the option needs a generic/common home. To Thomas' point, the KEXEC and CRASH options have largely been duplicated in the various arch/<arch>/Kconfig files, with minor differences. This kind of proliferation is to be avoid/stopped. https://lore.kernel.org/lkml/875y91yv63.ffs@tglx/ To that end, I have refactored the arch Kconfigs so as to consolidate the various KEXEC and CRASH options. Generally speaking, this work has the following themes: - KEXEC and CRASH options are moved into new file kernel/Kconfig.kexec - These items from arch/Kconfig: CRASH_CORE KEXEC_CORE KEXEC_ELF HAVE_IMA_KEXEC - These items from arch/x86/Kconfig form the common options: KEXEC KEXEC_FILE KEXEC_SIG KEXEC_SIG_FORCE KEXEC_BZIMAGE_VERIFY_SIG KEXEC_JUMP CRASH_DUMP - These items from arch/arm64/Kconfig form the common options: KEXEC_IMAGE_VERIFY_SIG - The crash hotplug series appends CRASH_HOTPLUG to Kconfig.kexec - The Kconfig.kexec is now a submenu titled "Kexec and crash features" and is now listed in "General Setup" submenu from init/Kconfig. - To control the common options, each has a new ARCH_SUPPORTS_<option> option. These gateway options determine whether the common options options are valid for the architecture. - To account for the slight differences in the original architecture coding of the common options, each now has a corresponding ARCH_SELECTS_<option> which are used to elicit the same side effects as the original arch/<arch>/Kconfig files for KEXEC and CRASH options. An example, 'make menuconfig' illustrating the submenu: > General setup > Kexec and crash features [*] Enable kexec system call [*] Enable kexec file based system call [*] Verify kernel signature during kexec_file_load() syscall [ ] Require a valid signature in kexec_file_load() syscall [ ] Enable bzImage signature verification support [*] kexec jump [*] kernel crash dumps [*] Update the crash elfcorehdr on system configuration changes In the process of consolidating the common options, I encountered slight differences in the coding of these options in several of the architectures. As a result, I settled on the following solution: - Each of the common options has a 'depends on ARCH_SUPPORTS_<option>' statement. For example, the KEXEC_FILE option has a 'depends on ARCH_SUPPORTS_KEXEC_FILE' statement. This approach is needed on all common options so as to prevent options from appearing for architectures which previously did not allow/enable them. For example, arm supports KEXEC but not KEXEC_FILE. The arch/arm/Kconfig does not provide ARCH_SUPPORTS_KEXEC_FILE and so KEXEC_FILE and related options are not available to arm. - The boolean ARCH_SUPPORTS_<option> in effect allows the arch to determine when the feature is allowed. Archs which don't have the feature simply do not provide the corresponding ARCH_SUPPORTS_<option>. For each arch, where there previously were KEXEC and/or CRASH options, these have been replaced with the corresponding boolean ARCH_SUPPORTS_<option>, and an appropriate def_bool statement. For example, if the arch supports KEXEC_FILE, then the ARCH_SUPPORTS_KEXEC_FILE simply has a 'def_bool y'. This permits the KEXEC_FILE option to be available. If the arch has a 'depends on' statement in its original coding of the option, then that expression becomes part of the def_bool expression. For example, arm64 had: config KEXEC depends on PM_SLEEP_SMP and in this solution, this converts to: config ARCH_SUPPORTS_KEXEC def_bool PM_SLEEP_SMP - In order to account for the architecture differences in the coding for the common options, the ARCH_SELECTS_<option> in the arch/<arch>/Kconfig is used. This option has a 'depends on <option>' statement to couple it to the main option, and from there can insert the differences from the common option and the arch original coding of that option. For example, a few archs enable CRYPTO and CRYTPO_SHA256 for KEXEC_FILE. These require a ARCH_SELECTS_KEXEC_FILE and 'select CRYPTO' and 'select CRYPTO_SHA256' statements. Illustrating the option relationships: For each of the common KEXEC and CRASH options: ARCH_SUPPORTS_<option> <- <option> <- ARCH_SELECTS_<option> <option> # in Kconfig.kexec ARCH_SUPPORTS_<option> # in arch/<arch>/Kconfig, as needed ARCH_SELECTS_<option> # in arch/<arch>/Kconfig, as needed For example, KEXEC: ARCH_SUPPORTS_KEXEC <- KEXEC <- ARCH_SELECTS_KEXEC KEXEC # in Kconfig.kexec ARCH_SUPPORTS_KEXEC # in arch/<arch>/Kconfig, as needed ARCH_SELECTS_KEXEC # in arch/<arch>/Kconfig, as needed To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be enabled, and the ARCH_SELECTS_<option> handles side effects (ie. select statements). Examples: A few examples to show the new strategy in action: ===== x86 (minus the help section) ===== Original: config KEXEC bool "kexec system call" select KEXEC_CORE config KEXEC_FILE bool "kexec file based system call" select KEXEC_CORE select HAVE_IMA_KEXEC if IMA depends on X86_64 depends on CRYPTO=y depends on CRYPTO_SHA256=y config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE config KEXEC_SIG bool "Verify kernel signature during kexec_file_load() syscall" depends on KEXEC_FILE config KEXEC_SIG_FORCE bool "Require a valid signature in kexec_file_load() syscall" depends on KEXEC_SIG config KEXEC_BZIMAGE_VERIFY_SIG bool "Enable bzImage signature verification support" depends on KEXEC_SIG depends on SIGNED_PE_FILE_VERIFICATION select SYSTEM_TRUSTED_KEYRING config CRASH_DUMP bool "kernel crash dumps" depends on X86_64 || (X86_32 && HIGHMEM) config KEXEC_JUMP bool "kexec jump" depends on KEXEC && HIBERNATION help becomes... New: config ARCH_SUPPORTS_KEXEC def_bool y config ARCH_SUPPORTS_KEXEC_FILE def_bool X86_64 && CRYPTO && CRYPTO_SHA256 config ARCH_SELECTS_KEXEC_FILE def_bool y depends on KEXEC_FILE select HAVE_IMA_KEXEC if IMA config ARCH_SUPPORTS_KEXEC_PURGATORY def_bool KEXEC_FILE config ARCH_SUPPORTS_KEXEC_SIG def_bool y config ARCH_SUPPORTS_KEXEC_SIG_FORCE def_bool y config ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG def_bool y config ARCH_SUPPORTS_KEXEC_JUMP def_bool y config ARCH_SUPPORTS_CRASH_DUMP def_bool X86_64 || (X86_32 && HIGHMEM) ===== powerpc (minus the help section) ===== Original: config KEXEC bool "kexec system call" depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP) select KEXEC_CORE config KEXEC_FILE bool "kexec file based system call" select KEXEC_CORE select HAVE_IMA_KEXEC if IMA select KEXEC_ELF depends on PPC64 depends on CRYPTO=y depends on CRYPTO_SHA256=y config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE config CRASH_DUMP bool "Build a dump capture kernel" depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP) select RELOCATABLE if PPC64 || 44x || PPC_85xx becomes... New: config ARCH_SUPPORTS_KEXEC def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP) config ARCH_SUPPORTS_KEXEC_FILE def_bool PPC64 && CRYPTO=y && CRYPTO_SHA256=y config ARCH_SUPPORTS_KEXEC_PURGATORY def_bool KEXEC_FILE config ARCH_SELECTS_KEXEC_FILE def_bool y depends on KEXEC_FILE select KEXEC_ELF select HAVE_IMA_KEXEC if IMA config ARCH_SUPPORTS_CRASH_DUMP def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP) config ARCH_SELECTS_CRASH_DUMP def_bool y depends on CRASH_DUMP select RELOCATABLE if PPC64 || 44x || PPC_85xx Testing Approach and Results There are 388 config files in the arch/<arch>/configs directories. For each of these config files, a .config is generated both before and after this Kconfig series, and checked for equivalence. This approach allows for a rather rapid check of all architectures and a wide variety of configs wrt/ KEXEC and CRASH, and avoids requiring compiling for all architectures and running kernels and run-time testing. For each config file, the olddefconfig, allnoconfig and allyesconfig targets are utilized. In testing the randconfig has revealed problems as well, but is not used in the before and after equivalence check since one can not generate the "same" .config for before and after, even if using the same KCONFIG_SEED since the option list is different. As such, the following script steps compare the before and after of 'make olddefconfig'. The new symbols introduced by this series are filtered out, but otherwise the config files are PASS only if they were equivalent, and FAIL otherwise. The script performs the test by doing the following: # Obtain the "golden" .config output for given config file # Reset test sandbox git checkout master git branch -D test_Kconfig git checkout -B test_Kconfig master make distclean # Write out updated config cp -f <config file> .config make ARCH=<arch> olddefconfig # Track each item in .config, LHSB is "golden" scoreboard .config # Obtain the "changed" .config output for given config file # Reset test sandbox make distclean # Apply this Kconfig series git am <this Kconfig series> # Write out updated config cp -f <config file> .config make ARCH=<arch> olddefconfig # Track each item in .config, RHSB is "changed" scoreboard .config # Determine test result # Filter-out new symbols introduced by this series # Filter-out symbol=n which not in either scoreboard # Compare LHSB "golden" and RHSB "changed" scoreboards and issue PASS/FAIL The script was instrumental during the refactoring of Kconfig as it continually revealed problems. The end result being that the solution presented in this series passes all configs as checked by the script, with the following exceptions: - arch/ia64/configs/zx1_config with olddefconfig This config file has: # CONFIG_KEXEC is not set CONFIG_CRASH_DUMP=y and this refactor now couples KEXEC to CRASH_DUMP, so it is not possible to enable CRASH_DUMP without KEXEC. - arch/sh/configs/* with allyesconfig The arch/sh/Kconfig codes CRASH_DUMP as dependent upon BROKEN_ON_MMU (which clearly is not meant to be set). This symbol is not provided but with the allyesconfig it is set to yes which enables CRASH_DUMP. But KEXEC is coded as dependent upon MMU, and is set to no in arch/sh/mm/Kconfig, so KEXEC is not enabled. This refactor now couples KEXEC to CRASH_DUMP, so it is not possible to enable CRASH_DUMP without KEXEC. While the above exceptions are not equivalent to their original, the config file produced is valid (and in fact better wrt/ CRASH_DUMP handling). This patch (of 14) The config options for kexec and crash features are consolidated into new file kernel/Kconfig.kexec. Under the "General Setup" submenu is a new submenu "Kexec and crash handling". All the kexec and crash options that were once in the arch-dependent submenu "Processor type and features" are now consolidated in the new submenu. The following options are impacted: - KEXEC - KEXEC_FILE - KEXEC_SIG - KEXEC_SIG_FORCE - KEXEC_BZIMAGE_VERIFY_SIG - KEXEC_JUMP - CRASH_DUMP The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP. Architectures specify support of certain KEXEC and CRASH features with similarly named new ARCH_SUPPORTS_<option> config options. Architectures can utilize the new ARCH_SELECTS_<option> config options to specify additional components when <option> is enabled. To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be enabled, and the ARCH_SELECTS_<option> handles side effects (ie. select statements). Link: https://lkml.kernel.org/r/20230712161545.87870-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230712161545.87870-2-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Cc. "H. Peter Anvin" <hpa@zytor.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> # for x86 Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Juerg Haefliger <juerg.haefliger@canonical.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marc Aurèle La France <tsi@tuyoix.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Xin Li <xin3.li@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Kefeng Wang
|
527ed4f7d9 |
mm: remove arguments of show_mem()
All callers of show_mem() pass 0 and NULL, so we can remove the two arguments by directly calling __show_mem(0, NULL, MAX_NR_ZONES - 1) in show_mem(). Link: https://lkml.kernel.org/r/20230630062253.189440-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Loic Poulain
|
45071e1c28 |
init: Add support for rootwait timeout parameter
Add an optional timeout arg to 'rootwait' as the maximum time in seconds to wait for the root device to show up before attempting forced mount of the root filesystem. Use case: In case of device mapper usage for the rootfs (e.g. root=/dev/dm-0), if the mapper is not able to create the virtual block for any reason (wrong arguments, bad dm-verity signature, etc), the `rootwait` param causes the kernel to wait forever. It may however be desirable to only wait for a given time and then panic (force mount) to cause device reset. This gives the bootloader a chance to detect the problem and to take some measures, such as marking the booted partition as bad (for A/B case) or entering a recovery mode. In success case, mounting happens as soon as the root device is ready, unlike the existing 'rootdelay' parameter which performs an unconditional pause. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Message-Id: <20230813082349.513386-1-loic.poulain@linaro.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Tejun Heo
|
2930155b2e |
workqueue: Initialize unbound CPU pods later in the boot
During boot, to initialize unbound CPU pods, wq_pod_init() was called from workqueue_init(). This is early enough for NUMA nodes to be set up but before SMP is brought up and CPU topology information is populated. Workqueue is in the process of improving CPU locality for unbound workqueues and will need access to topology information during pod init. This adds a new init function workqueue_init_topology() which is called after CPU topology information is available and replaces wq_pod_init(). As unbound CPU pods are now initialized after workqueues are activated, we need to revisit the workqueues to apply the pod configuration. Workqueues which are created before workqueue_init_topology() are set up so that they always use the default worker pool. After pods are set up in workqueue_init_topology(), wq_update_pod() is called on all existing workqueues to update the pool associations accordingly. Note that wq_update_pod_attrs_buf allocation is moved to workqueue_init_early(). This isn't necessary right now but enables further generalization of pod handling in the future. This patch changes the initialization sequence but the end result should be the same. Signed-off-by: Tejun Heo <tj@kernel.org> |
||
Randy Dunlap
|
98dfdd9ee9 |
sched/psi: Select KERNFS as needed
Users of KERNFS should select it to enforce its being built, so
do this to prevent a build error.
In file included from ../kernel/sched/build_utility.c:97:
../kernel/sched/psi.c: In function 'psi_trigger_poll':
../kernel/sched/psi.c:1479:17: error: implicit declaration of function 'kernfs_generic_poll' [-Werror=implicit-function-declaration]
1479 | kernfs_generic_poll(t->of, wait);
Fixes:
|
||
Linus Torvalds
|
ad2885979e |
Kbuild updates for v6.5
- Remove the deprecated rule to build *.dtbo from *.dts - Refactor section mismatch detection in modpost - Fix bogus ARM section mismatch detections - Fix error of 'make gtags' with O= option - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error with the latest LLVM version - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed - Ignore more compiler-generated symbols for kallsyms - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles - Enable more kernel-doc warnings with W=2 - Refactor <linux/export.h> by generating KSYMTAB data by modpost - Deprecate <asm/export.h> and <asm-generic/export.h> - Remove the EXPORT_DATA_SYMBOL macro - Move the check for static EXPORT_SYMBOL back to modpost, which makes the build faster - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm - Warn missing MODULE_DESCRIPTION when building modules with W=1 - Make 'make clean' robust against too long argument error - Exclude more objects from GCOV to fix CFI failures with GCOV - Allow 'make modules_install' to install modules.builtin and modules.builtin.modinfo even when CONFIG_MODULES is disabled - Include modules.builtin and modules.builtin.modinfo in the linux-image Debian package even when CONFIG_MODULES is disabled - Revive "Entering directory" logging for the latest Make version -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmSf6B0VHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGS2wP/1izzNJ/64XmQoyBDhZCbuOl7ODF n4wgVJnsJmRnD/RxXR/AZ0JZwQHhzpGISWQM61rVIf/RVFOB7Apx1HpmomKUUjrL Yc53wLfhTEizGgwttP6tusLM3RO6jkuMKhjC4rllc0tDLJ3zCcwAjSyiOQQ9PBcH txwAb8r4/TZUzDDCJ0d98WdhIsNDca/ISeRXKHMiIkfvHe+6yizDKu25Y4B6BL5g 0VPJ9nVJZ+XVwRqdVR+UQoPYGZzZ/O2NqAtU7n4PpBKvFfLACILJW+aBDAz9SqN7 RSxn1ahxwq0vrhlB9bSrQRj3N0g8zsi7/xShEZSnGLCbyxYilr5Gq8C59+QxOIJf 5lGBwZlEgn5aWH+D9abwjEI/QOQbTI9kX09sVzweulGCN9iJlJqyIGsB0Ri0/S2R c/n7c8nLwnWnGF/+LXYvkrak8L9YRKori//YYf9zdvh4h1c2/0SS0nDoC29DhDru Am7YmhBAkJXXX3NUB2gLvtdp94GSumqefHeSJ5Sp9v/+f2Ft7ruY2ouJC81xDa4p nNpvolAq2txlZ9t5OU7x7DQiuCWYSws0W7PJ9FBhyHJchf21UHbcm97/HfDoU8rN ioLQGm+h+g6oZt8pArk45wccjkR3ydpEFDWenYbTEr2o3zLfeKigZps5uhCK3DW2 gnVk50VNagkzrzvA =Rc1z -----END PGP SIGNATURE----- Merge tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove the deprecated rule to build *.dtbo from *.dts - Refactor section mismatch detection in modpost - Fix bogus ARM section mismatch detections - Fix error of 'make gtags' with O= option - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error with the latest LLVM version - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed - Ignore more compiler-generated symbols for kallsyms - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles - Enable more kernel-doc warnings with W=2 - Refactor <linux/export.h> by generating KSYMTAB data by modpost - Deprecate <asm/export.h> and <asm-generic/export.h> - Remove the EXPORT_DATA_SYMBOL macro - Move the check for static EXPORT_SYMBOL back to modpost, which makes the build faster - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm - Warn missing MODULE_DESCRIPTION when building modules with W=1 - Make 'make clean' robust against too long argument error - Exclude more objects from GCOV to fix CFI failures with GCOV - Allow 'make modules_install' to install modules.builtin and modules.builtin.modinfo even when CONFIG_MODULES is disabled - Include modules.builtin and modules.builtin.modinfo in the linux-image Debian package even when CONFIG_MODULES is disabled - Revive "Entering directory" logging for the latest Make version * tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits) modpost: define more R_ARM_* for old distributions kbuild: revive "Entering directory" for Make >= 4.4.1 kbuild: set correct abs_srctree and abs_objtree for package builds scripts/mksysmap: Ignore prefixed KCFI symbols kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb kbuild: builddeb: always make modules_install, to install modules.builtin* modpost: continue even with unknown relocation type modpost: factor out Elf_Sym pointer calculation to section_rel() modpost: factor out inst location calculation to section_rel() kbuild: Disable GCOV for *.mod.o kbuild: Fix CFI failures with GCOV kbuild: make clean rule robust against too long argument error script: modpost: emit a warning when the description is missing kbuild: make modules_install copy modules.builtin(.modinfo) linux/export.h: rename 'sec' argument to 'license' modpost: show offset from symbol for section mismatch warnings modpost: merge two similar section mismatch warnings kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion modpost: use null string instead of NULL pointer for default namespace modpost: squash sym_update_namespace() into sym_add_exported() ... |
||
Linus Torvalds
|
77b1a7f7a0 |
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in
top-level directories. - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs. - Zhen Lei has enhanced kexec's ability to support two crash regions. - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries. - And the usual bunch of singleton patches in various places. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa 2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU= =F293 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-mm updates from Andrew Morton: - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level directories - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs - Zhen Lei has enhanced kexec's ability to support two crash regions - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries - And the usual bunch of singleton patches in various places * tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) kernel/time/posix-stubs.c: remove duplicated include ocfs2: remove redundant assignment to variable bit_off watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h devres: show which resource was invalid in __devm_ioremap_resource() watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64 watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h watchdog/hardlockup: make the config checks more straightforward watchdog/hardlockup: sort hardlockup detector related config values a logical way watchdog/hardlockup: move SMP barriers from common code to buddy code watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY watchdog/buddy: don't copy the cpumask in watchdog_next_cpu() watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog() watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy() watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick() watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe() watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails ... |
||
Linus Torvalds
|
6e17c6de3d |
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs.
- Yosry has also eliminated cgroup's atomic rstat flushing. - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability. - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning. - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface. - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree. - Johannes Weiner has done some cleanup work on the compaction code. - David Hildenbrand has contributed additional selftests for get_user_pages(). - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code. - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code. - Huang Ying has done some maintenance on the swap code's usage of device refcounting. - Christoph Hellwig has some cleanups for the filemap/directio code. - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses. - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings. - John Hubbard has a series of fixes to the MM selftesting code. - ZhangPeng continues the folio conversion campaign. - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock. - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8. - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management. - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code. - Vishal Moola also has done some folio conversion work. - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh J0qXCzqaaN8+BuEyLGDVPaXur9KirwY= =B7yQ -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ... |
||
Linus Torvalds
|
6f612579be |
objtool changes for v6.5:
- Build footprint & performance improvements: - Reduce memory usage with CONFIG_DEBUG_INFO=y In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel, DWARF creates almost 200 million relocations, ballooning objtool's peak heap usage to 53GB. These patches reduce that to 25GB. On a distro-type kernel with kernel IBT enabled, they reduce objtool's peak heap usage from 4.2GB to 2.8GB. These changes also improve the runtime significantly. - Debuggability improvements: - Add the unwind_debug command-line option, for more extend unwinding debugging output. - Limit unreachable warnings to once per function - Add verbose option for disassembling affected functions - Include backtrace in verbose mode - Detect missing __noreturn annotations - Ignore exc_double_fault() __noreturn warnings - Remove superfluous global_noreturns entries - Move noreturn function list to separate file - Add __kunit_abort() to noreturns - Unwinder improvements: - Allow stack operations in UNWIND_HINT_UNDEFINED regions - drm/vmwgfx: Add unwind hints around RBP clobber - Cleanups: - Move the x86 entry thunk restore code into thunk functions - x86/unwind/orc: Use swap() instead of open coding it - Remove unnecessary/unused variables - Fixes for modern stack canary handling Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmSaxcoRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1ht5w//f8mBoABct29pS4ib6pDwRZQDoG8fCA7M +KWjFD1AhX7RsJVEbM4uBUXdSWZD61xxIa8p8LO2jjzE5RyhM+EuNaisKujKqmfj uQTSnRhIRHMPqqVGK/gQxy1v4+3+12O32XFIJhAPYCp/dpbZJ2yKDsiHjapzZTDy BM+86hbIyHFmSl5uJcBFHEv6EGhoxwdrrrOxhpao1CqfAUi+uVgamHGwVqx+NtTY MvOmcy3/0ukHwDLON0MIMu9MSwvnXorD7+RSkYstwAM/k6ao/k78iJ31sOcynpRn ri0gmfygJsh2bxL4JUlY4ZeTs7PLWkj3i60deePc5u6EyV4JDJ2borUibs5oGoF6 pN0AwbtubLHHhUI/v74B3E6K6ZGvLiEn9dsNTuXsJffD+qU2REb+WLhr4ut+E1Wi IKWrYh811yBLyOqFEW3XudZTiXSJlgi3eYiCxspEsKw2RIFFt2g6vYcwrIb0Hatw 8R4/jCWk1nc6Wa3RQYsVnhkglAECSKQdDfS7p2e1hNUTjZuess4EEJjSLs8upIQ9 D1bmuUxEzRxVwAZtXYNh0NKe7OtyOrqgsVTQuqxvWXq2CpC7Hqj8piVJWHdBWgHO 0o2OQqjwSrzAtevpAIaYQv9zhPs1hV7CpBgzzqWGXrwJ3vM6YoSRLf0bg+5OkN8I O4U2xq2OVa8= =uNnc -----END PGP SIGNATURE----- Merge tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molar: "Build footprint & performance improvements: - Reduce memory usage with CONFIG_DEBUG_INFO=y In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel, DWARF creates almost 200 million relocations, ballooning objtool's peak heap usage to 53GB. These patches reduce that to 25GB. On a distro-type kernel with kernel IBT enabled, they reduce objtool's peak heap usage from 4.2GB to 2.8GB. These changes also improve the runtime significantly. Debuggability improvements: - Add the unwind_debug command-line option, for more extend unwinding debugging output - Limit unreachable warnings to once per function - Add verbose option for disassembling affected functions - Include backtrace in verbose mode - Detect missing __noreturn annotations - Ignore exc_double_fault() __noreturn warnings - Remove superfluous global_noreturns entries - Move noreturn function list to separate file - Add __kunit_abort() to noreturns Unwinder improvements: - Allow stack operations in UNWIND_HINT_UNDEFINED regions - drm/vmwgfx: Add unwind hints around RBP clobber Cleanups: - Move the x86 entry thunk restore code into thunk functions - x86/unwind/orc: Use swap() instead of open coding it - Remove unnecessary/unused variables Fixes for modern stack canary handling" * tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y objtool: Skip reading DWARF section data objtool: Free insns when done objtool: Get rid of reloc->rel[a] objtool: Shrink elf hash nodes objtool: Shrink reloc->sym_reloc_entry objtool: Get rid of reloc->jump_table_start objtool: Get rid of reloc->addend objtool: Get rid of reloc->type objtool: Get rid of reloc->offset objtool: Get rid of reloc->idx objtool: Get rid of reloc->list objtool: Allocate relocs in advance for new rela sections objtool: Add for_each_reloc() objtool: Don't free memory in elf_close() objtool: Keep GElf_Rel[a] structs synced objtool: Add elf_create_section_pair() objtool: Add mark_sec_changed() objtool: Fix reloc_hash size objtool: Consolidate rel/rela handling ... |
||
Linus Torvalds
|
7cffdbe360 |
Updates for the x86 boot process:
- Initialize FPU late. Right now FPU is initialized very early during boot. There is no real requirement to do so. The only requirement is to have it done before alternatives are patched. That's done in check_bugs() which does way more than what the function name suggests. So first rename check_bugs() to arch_cpu_finalize_init() which makes it clear what this is about. Move the invocation of arch_cpu_finalize_init() earlier in start_kernel() as it has to be done before fork_init() which needs to know the FPU register buffer size. With those prerequisites the FPU initialization can be moved into arch_cpu_finalize_init(), which removes it from the early and fragile part of the x86 bringup. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmSZdNYTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoaNBEACWtVd1uhqQldIFgSvZYujsrWXlmkU+ pok6gDzKQNwZADiXW/tn5fP8SBLWT0pgLM9d+oZ5mEaLaOW7HcZLEHcVrn74e3TT 53xN8e1zCzyjCJ/x22vrKH4sn/bU+bQyzSNVu9Disqn9Fl+ts37FqAHDv/ExbneD DaYXXCLgQsyGbPLD8B7yGOpJTGBUTJxNQS1ZFElBaRsAaw0mYZOEoPvuTFK4o7Uz GUB2vGefmeNfX+EgLYKG9QoS0F3SMS9X2IYswy1H76ZnV/eXmTsA1S3u3X9yX7kC XBnPtCC+iX+7o3xFkTpa0oQUdzEyGOItExZZgce6jEQu4Fl7NoIJxhlMg9/Y+vcF ntipEKSWFLAi1GkZzeKRwSSsoWqRaFxOKLy8qhn9kud09k+UtMBkNrF1CSp9laAz QParu3B1oHPEzx/jS0bSOCMN+AQZH8rX7LxRp4kpBOeBSZNCnfaBUzfIvmccPls+ EJTO/0JUpRm5LsPSDiJhypPRoOOIP26IloR6OoZTcI3p76NrnYblRvisvuFAgDU6 bk7Belf+GDx0kBZugqQgok7nDaHIBR7vEmca1NV8507UrffVyxLAiI4CiWPcFdOq ovhO8K+gP4xvzZx4cXZBwYwusjvl/oxKy8yQiGgoftDiWU4sdUCSrwX3x27+hUYL 2P1OLDOXSGwESQ== =yxMj -----END PGP SIGNATURE----- Merge tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Thomas Gleixner: "Initialize FPU late. Right now FPU is initialized very early during boot. There is no real requirement to do so. The only requirement is to have it done before alternatives are patched. That's done in check_bugs() which does way more than what the function name suggests. So first rename check_bugs() to arch_cpu_finalize_init() which makes it clear what this is about. Move the invocation of arch_cpu_finalize_init() earlier in start_kernel() as it has to be done before fork_init() which needs to know the FPU register buffer size. With those prerequisites the FPU initialization can be moved into arch_cpu_finalize_init(), which removes it from the early and fragile part of the x86 bringup" * tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build x86/fpu: Move FPU initialization into arch_cpu_finalize_init() x86/fpu: Mark init functions __init x86/fpu: Remove cpuinfo argument from init functions x86/init: Initialize signal frame size late init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init() init: Invoke arch_cpu_finalize_init() earlier init: Remove check_bugs() leftovers um/cpu: Switch to arch_cpu_finalize_init() sparc/cpu: Switch to arch_cpu_finalize_init() sh/cpu: Switch to arch_cpu_finalize_init() mips/cpu: Switch to arch_cpu_finalize_init() m68k/cpu: Switch to arch_cpu_finalize_init() loongarch/cpu: Switch to arch_cpu_finalize_init() ia64/cpu: Switch to arch_cpu_finalize_init() ARM: cpu: Switch to arch_cpu_finalize_init() x86/cpu: Switch to arch_cpu_finalize_init() init: Provide arch_cpu_finalize_init() |
||
Linus Torvalds
|
a0433f8cae |
for-6.5/block-2023-06-23
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmSV8dwQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpilGD/9Yys1oxIXJpRf00fzrylAlBthRxMjFQVWw zAut106hAQiBHvU8IkmGA3MvEFVHxtzwYhHI7IR8K3aZBIqscweCqmVI9JyogJw9 U9Twnzel47VmuKdM94FeoN+hbj1fP8EWTjzmy67/zEEfFCdmHvNlMi3lSrGYIpFy 39LxTB99Y4UarM5PtWbes37GYYljzMSWKuo4AfBkvq1eQa+sZ0Vq2xAABKq3UM7f apqhgHtkJooRePDP0eQp+kAyyVMgW2jIK+oIdJDxNF3CKTu2w40RzaYz6fp+jVSU H4R/xS59GW4/xql+VBJDh/qJg9K62DPPYjlW8BmSR8+IjvfFpsyH3/MacE50CD3P 20fs/Mnj49H79fDrQEHJI53cOOb2EmUitbwLbvOcColNTPpt8loBtdQxjF2RMU8R Nyort9DJPFclYCxky1LYg1CNEC2Ln4Zy/jD47wPvqRmOQphOoVlV/hPnOEqvjaZC 49Vn70W2DeE9cXvYI7ha+XIg6/oj+Gs3iusEbV08Ci7EAtXgI+ZUUsQ97K8UNiUh h2lqSJtuI7lBpYP9sf+BeCch5UCC+xGYyTdoM5f58lehWBBPtbs0g7S9RyRyOYxe n+yxEUo3dAGzJ/xsKAjinbZfeWIpr0b1TkAh4w3Cq/BKzRr9Bp8lBAxYuancbQ+Y 1ADPteUOTA== =zP4Y -----END PGP SIGNATURE----- Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux Pull block updates from Jens Axboe: - NVMe pull request via Keith: - Various cleanups all around (Irvin, Chaitanya, Christophe) - Better struct packing (Christophe JAILLET) - Reduce controller error logs for optional commands (Keith) - Support for >=64KiB block sizes (Daniel Gomez) - Fabrics fixes and code organization (Max, Chaitanya, Daniel Wagner) - bcache updates via Coly: - Fix a race at init time (Mingzhe Zou) - Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye) - use page pinning in the block layer for dio (David) - convert old block dio code to page pinning (David, Christoph) - cleanups for pktcdvd (Andy) - cleanups for rnbd (Guoqing) - use the unchecked __bio_add_page() for the initial single page additions (Johannes) - fix overflows in the Amiga partition handling code (Michael) - improve mq-deadline zoned device support (Bart) - keep passthrough requests out of the IO schedulers (Christoph, Ming) - improve support for flush requests, making them less special to deal with (Christoph) - add bdev holder ops and shutdown methods (Christoph) - fix the name_to_dev_t() situation and use cases (Christoph) - decouple the block open flags from fmode_t (Christoph) - ublk updates and cleanups, including adding user copy support (Ming) - BFQ sanity checking (Bart) - convert brd from radix to xarray (Pankaj) - constify various structures (Thomas, Ivan) - more fine grained persistent reservation ioctl capability checks (Jingbo) - misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan, Jordy, Li, Min, Yu, Zhong, Waiman) * tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits) scsi/sg: don't grab scsi host module reference ext4: Fix warning in blkdev_put() block: don't return -EINVAL for not found names in devt_from_devname cdrom: Fix spectre-v1 gadget block: Improve kernel-doc headers blk-mq: don't insert passthrough request into sw queue bsg: make bsg_class a static const structure ublk: make ublk_chr_class a static const structure aoe: make aoe_class a static const structure block/rnbd: make all 'class' structures const block: fix the exclusive open mask in disk_scan_partitions block: add overflow checks for Amiga partition support block: change all __u32 annotations to __be32 in affs_hardblocks.h block: fix signed int overflow in Amiga partition support block: add capacity validation in bdev_add_partition() block: fine-granular CAP_SYS_ADMIN for Persistent Reservation block: disallow Persistent Reservation on partitions reiserfs: fix blkdev_put() warning from release_journal_dev() block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions() block: document the holder argument to blkdev_get_by_path ... |
||
Sami Tolvanen
|
ddf56288ee |
kbuild: Fix CFI failures with GCOV
With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to each object file, and the functions are indirectly called during boot. However, when code is injected to object files that are not part of vmlinux.o, it's also not processed by objtool, which breaks CFI hash randomization as the hashes in these files won't be included in the .cfi_sites section and thus won't be randomized. Similarly to commit |
||
Thomas Gleixner
|
439e17576e |
init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
Invoke the X86ism mem_encrypt_init() from X86 arch_cpu_finalize_init() and remove the weak fallback from the core code. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.670360645@linutronix.de |
||
Thomas Gleixner
|
9df9d2f047 |
init: Invoke arch_cpu_finalize_init() earlier
X86 is reworking the boot process so that initializations which are not required during early boot can be moved into the late boot process and out of the fragile and restricted initial boot phase. arch_cpu_finalize_init() is the obvious place to do such initializations, but arch_cpu_finalize_init() is invoked too late in start_kernel() e.g. for initializing the FPU completely. fork_init() requires that the FPU is initialized as the size of task_struct on X86 depends on the size of the required FPU register buffer. Fortunately none of the init calls between calibrate_delay() and arch_cpu_finalize_init() is relevant for the functionality of arch_cpu_finalize_init(). Invoke it right after calibrate_delay() where everything which is relevant for arch_cpu_finalize_init() has been set up already. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Link: https://lore.kernel.org/r/20230613224545.612182854@linutronix.de |
||
Thomas Gleixner
|
61235b24b9 |
init: Remove check_bugs() leftovers
Everything is converted over to arch_cpu_finalize_init(). Remove the check_bugs() leftovers including the empty stubs in asm-generic, alpha, parisc, powerpc and xtensa. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de |
||
Thomas Gleixner
|
7725acaa4f |
init: Provide arch_cpu_finalize_init()
check_bugs() has become a dumping ground for all sorts of activities to finalize the CPU initialization before running the rest of the init code. Most are empty, a few do actual bug checks, some do alternative patching and some cobble a CPU advertisement string together.... Aside of that the current implementation requires duplicated function declaration and mostly empty header files for them. Provide a new function arch_cpu_finalize_init(). Provide a generic declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub inline otherwise. This requires a temporary #ifdef in start_kernel() which will be removed along with check_bugs() once the architectures are converted over. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de |
||
Angus Chen
|
6aee6723f1 |
init: add bdev fs printk if mount_block_root failed
Booting with the QEMU command line: "qemu-system-x86_64 -append root=/dev/vda rootfstype=ext4 ..." will panic if ext4 is not builtin and a request to load the ext4 module fails. [ 1.729006] VFS: Cannot open root device "vda" or unknown-block(253,0): error -19 [ 1.730603] Please append a correct "root=" boot option; here are the available partitions: [ 1.732323] fd00 256000 vda [ 1.732329] driver: virtio_blk [ 1.734194] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(253,0) [ 1.734771] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-rc2+ #53 [ 1.735194] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1.735772] Call Trace: [ 1.735950] <TASK> [ 1.736113] dump_stack_lvl+0x32/0x50 [ 1.736367] panic+0x108/0x310 [ 1.736570] mount_block_root+0x161/0x310 [ 1.736849] ? rdinit_setup+0x40/0x40 [ 1.737088] prepare_namespace+0x10c/0x180 [ 1.737393] kernel_init_freeable+0x354/0x450 [ 1.737707] ? rest_init+0xd0/0xd0 [ 1.737945] kernel_init+0x16/0x130 [ 1.738196] ret_from_fork+0x1f/0x30 As a hint, print all the bdev fstypes which are available. [akpm@linux-foundation.org: fix spelling in printk message] Link: https://lkml.kernel.org/r/20230518035321.1672-1-angus.chen@jaguarmicro.com Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Arnd Bergmann
|
73648e6fa7 |
init: move cifs_root_data() prototype into linux/mount.h
cifs_root_data() is defined in cifs and called from early init code, but lacks a global prototype: fs/cifs/cifsroot.c:83:12: error: no previous prototype for 'cifs_root_data' Move the declaration from do_mounts.c into an appropriate header. Link: https://lkml.kernel.org/r/20230517131102.934196-13-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Paris <eparis@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Arnd Bergmann
|
ad1a48301f |
init: consolidate prototypes in linux/init.h
The init/main.c file contains some extern declarations for functions defined in architecture code, and it defines some other functions that are called from architecture code with a custom prototype. Both of those result in warnings with 'make W=1': init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes] init/main.c:790:20: error: no previous prototype for 'mem_encrypt_init' [-Werror=missing-prototypes] init/main.c:792:20: error: no previous prototype for 'poking_init' [-Werror=missing-prototypes] arch/arm64/kernel/irq.c:122:13: error: no previous prototype for 'init_IRQ' [-Werror=missing-prototypes] arch/arm64/kernel/time.c:55:13: error: no previous prototype for 'time_init' [-Werror=missing-prototypes] arch/x86/kernel/process.c:935:13: error: no previous prototype for 'arch_post_acpi_subsys_init' [-Werror=missing-prototypes] init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes] kernel/fork.c:991:20: error: no previous prototype for 'arch_task_cache_init' [-Werror=missing-prototypes] Add prototypes for all of these in include/linux/init.h or another appropriate header, and remove the duplicate declarations from architecture specific code. [sfr@canb.auug.org.au: declare time_init_early()] Link: https://lkml.kernel.org/r/20230519124311.5167221c@canb.auug.org.au Link: https://lkml.kernel.org/r/20230517131102.934196-12-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Paris <eparis@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Nhat Pham
|
cf264e1329 |
cachestat: implement cachestat syscall
There is currently no good way to query the page cache state of large file sets and directory trees. There is mincore(), but it scales poorly: the kernel writes out a lot of bitmap data that userspace has to aggregate, when the user really doesn not care about per-page information in that case. The user also needs to mmap and unmap each file as it goes along, which can be quite slow as well. Some use cases where this information could come in handy: * Allowing database to decide whether to perform an index scan or direct table queries based on the in-memory cache state of the index. * Visibility into the writeback algorithm, for performance issues diagnostic. * Workload-aware writeback pacing: estimating IO fulfilled by page cache (and IO to be done) within a range of a file, allowing for more frequent syncing when and where there is IO capacity, and batching when there is not. * Computing memory usage of large files/directory trees, analogous to the du tool for disk usage. More information about these use cases could be found in the following thread: https://lore.kernel.org/lkml/20230315170934.GA97793@cmpxchg.org/ This patch implements a new syscall that queries cache state of a file and summarizes the number of cached pages, number of dirty pages, number of pages marked for writeback, number of (recently) evicted pages, etc. in a given range. Currently, the syscall is only wired in for x86 architecture. NAME cachestat - query the page cache statistics of a file. SYNOPSIS #include <sys/mman.h> struct cachestat_range { __u64 off; __u64 len; }; struct cachestat { __u64 nr_cache; __u64 nr_dirty; __u64 nr_writeback; __u64 nr_evicted; __u64 nr_recently_evicted; }; int cachestat(unsigned int fd, struct cachestat_range *cstat_range, struct cachestat *cstat, unsigned int flags); DESCRIPTION cachestat() queries the number of cached pages, number of dirty pages, number of pages marked for writeback, number of evicted pages, number of recently evicted pages, in the bytes range given by `off` and `len`. An evicted page is a page that is previously in the page cache but has been evicted since. A page is recently evicted if its last eviction was recent enough that its reentry to the cache would indicate that it is actively being used by the system, and that there is memory pressure on the system. These values are returned in a cachestat struct, whose address is given by the `cstat` argument. The `off` and `len` arguments must be non-negative integers. If `len` > 0, the queried range is [`off`, `off` + `len`]. If `len` == 0, we will query in the range from `off` to the end of the file. The `flags` argument is unused for now, but is included for future extensibility. User should pass 0 (i.e no flag specified). Currently, hugetlbfs is not supported. Because the status of a page can change after cachestat() checks it but before it returns to the application, the returned values may contain stale information. RETURN VALUE On success, cachestat returns 0. On error, -1 is returned, and errno is set to indicate the error. ERRORS EFAULT cstat or cstat_args points to an invalid address. EINVAL invalid flags. EBADF invalid file descriptor. EOPNOTSUPP file descriptor is of a hugetlbfs file [nphamcs@gmail.com: replace rounddown logic with the existing helper] Link: https://lkml.kernel.org/r/20230504022044.3675469-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20230503013608.2431726-3-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Brian Foster <bfoster@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Christoph Hellwig
|
702f3189e4 |
block: move the code to do early boot lookup of block devices to block/
Create a new block/early-lookup.c to keep the early block device lookup code instead of having this code sit with the early mount code. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230531125535.676098-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Christoph Hellwig
|
079caa35f7 |
init: clear root_wait on all invalid root= strings
Instead of only clearing root_wait in devt_from_partuuid when the UUID format was invalid, do that in parse_root_device for all strings that failed to parse. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230531125535.676098-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |