Following errors were seen with um-x86_64-gcc12/um-allyesconfig:
+ /kisskb/src/drivers/mtd/spi-nor/spansion.c: error: 'op' is used uninitialized [-Werror=uninitialized]: => 495:27, 364:27
Initialise local struct spi_mem_op with all zeros at declaration in
order to avoid using garbage data for fields that are not explicitly
set afterwards.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c87c9b11c5 ("mtd: spi-nor: spansion: Determine current address mode")
Fixes: 6afcc84080 ("mtd: spi-nor: spansion: Add support for Infineon S25FS256T")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230509193900.948753-1-tudor.ambarus@linaro.org
UBI:
- Fix error value for try_write_vid_and_data()
- Minor cleanups
UBIFS:
- Fixes for various memory leaks
- Minor cleanups
-----BEGIN PGP SIGNATURE-----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=3ows
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Fix error value for try_write_vid_and_data()
- Minor cleanups
UBIFS:
- Fixes for various memory leaks
- Minor cleanups"
* tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Fix memleak when insert_old_idx() failed
Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
ubifs: Fix memory leak in do_rename
ubifs: Free memory for tmpfile name
ubi: Fix return value overwrite issue in try_write_vid_and_data()
ubifs: Remove return in compr_exit()
ubi: Simplify bool conversion
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
A fairly standard release for SPI with the exception of a change to the
API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily for
a while. There's also a new API to allow us to TPM chips on half duplex
controllers.
There's three commits in here that were mangled by a bad interaction
between the alsa-devel mailing list software and b4, I didn't notice
until there were merges on top with it being SPI not ALSA. It seemed
clear enough to not be worth going back and fixing.
- Refactoring in preparation for supporting multiple chip selects for a
single device, needed by some flash devices, which required a change
in the SPI device API visible throughout the tree.
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI.
- Optimisation for large transfers on fsl-cpm devices.
- Cleanups around device property use which fix some sisues with
fwnode.
- Use of both void remove() and devm_platform_.*ioremap_resource().
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI.
The final commit converting to DEV_PM_OPS() was applied late to fix a
warning that was introduced by some of the earlier work.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRIFQgACgkQJNaLcl1U
h9BJOwf+JF2RySdn5g1LsyTndPZhLfw4iJgTHaMlnv5tiPHvYVYMM/mNMbMr5Znh
Y2T0OUkzuRfOK273C+hItC1bTYFTa2cEbDb5dpmKBOZdQ3hjGsZQBvuH2bScUQ+a
H7UgD3FYOJST6k6rRgZQxVMPePFrXAOaO1gmFWTR3v1EcEr2JeQnjZsmymFXcTnc
CtPg9N3RvhVnq5aXuxSgQeyyKIjo4LJh/eZ2mexPIu0DeUq3MftaWwSwCXFIoeNC
DMLA4mZWTgf/yt6JUALwLr+bIiJjb4qGjp3xGZ2wmX7zn73f9QQvuunKb1V4zbNF
EdXLo2VjA9cZjsihenBaKeHnkfgNfA==
=IRqY
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
* dt-bindings: Drop unneeded quotes
* mtdblock: Tolerate corrected bit-flips
* Use of_property_read_bool() for boolean properties
* Avoid magic values
* Avoid printing error messages on probe deferrals
* Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
* Fix error path for nvmem provider
* Fix nvmem error reporting
* Provide unique name for nvmem device
MTD device changes:
* lpddr_cmds: Remove unused words variable
* bcm63xxpart: Remove MODULE_LICENSE in non-modules
SPI NOR core changes:
* Introduce Read While Write support for flashes featuring several banks
* Set the 4-Byte Address Mode method based on SFDP data
* Allow post_sfdp hook to return errors
* Parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
* macronix: Add support for mx25uw51245g with RWW
* spansion:
- Determine current address mode at runtime as it can be changed in a
non-volatile way and differ from factory defaults or from what SFDP
advertises.
- Enable JFFS2 write buffer mode for few ECC'd NOR flashes: S25FS256T,
s25hx and s28hx
- Add support for s25hl02gt and s25hs02gt
Raw NAND core changes:
* Convert to platform remove callback returning void
* Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
* imx: Remove unused is_imx51_nfc and imx53_nfc functions
* omap2: Drop obsolete dependency on COMPILE_TEST
* orion: Use devm_platform_ioremap_resource()
* qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
* stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
* tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
* hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
* Add support for ESMT F50x1G41LB
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmRANmIACgkQJWrqGEe9
VoRU2QgAl8XFkLs1h88wGi6ln/MSK0cQJZWUzteGgWuaBQCMNfgGFzqPHyJ7ygO9
l4U4O1L/IvACvJx5QHm/lH5Mig23jym9J8YfV1Kf9aVYOlBKRNysbi+DdktESGG9
6HmpS0nQfkC84qA8ouInOp+AZYjFEPRrBfp5UWkSRHiQJvcYnt2iS2oOLk3LNY6y
zduBOno3mric2ZlBbg+ZCURhQzrr3k8c4VXV+LHSslqsmH/2sOFlg78hLJx922Y+
FTfYnx82iLIvFAJttRi2bXWKuE1Yr2XWJ3iEHKxmOA2vPmYi6mDBHTYhnikGSpm+
GhARHH+JhW7qzLbaq5ZC3HGH58aC/g==
=aYlo
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Core MTD changes:
- dt-bindings: Drop unneeded quotes
- mtdblock: Tolerate corrected bit-flips
- Use of_property_read_bool() for boolean properties
- Avoid magic values
- Avoid printing error messages on probe deferrals
- Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
- Fix error path for nvmem provider
- Fix nvmem error reporting
- Provide unique name for nvmem device
MTD device changes:
- lpddr_cmds: Remove unused words variable
- bcm63xxpart: Remove MODULE_LICENSE in non-modules
SPI NOR core changes:
- Introduce Read While Write support for flashes featuring several
banks
- Set the 4-Byte Address Mode method based on SFDP data
- Allow post_sfdp hook to return errors
- Parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
- macronix: Add support for mx25uw51245g with RWW
- spansion:
- Determine current address mode at runtime as it can be changed
in a non-volatile way and differ from factory defaults or from
what SFDP advertises.
- Enable JFFS2 write buffer mode for few ECC'd NOR flashes:
S25FS256T, s25hx and s28hx
- Add support for s25hl02gt and s25hs02gt
Raw NAND core changes:
- Convert to platform remove callback returning void
- Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
- imx: Remove unused is_imx51_nfc and imx53_nfc functions
- omap2: Drop obsolete dependency on COMPILE_TEST
- orion: Use devm_platform_ioremap_resource()
- qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
- stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
- tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
- hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
- Add support for ESMT F50x1G41LB"
* tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (55 commits)
mtd: nand: Convert to platform remove callback returning void
mtd: onenand: omap2: Drop obsolete dependency on COMPILE_TEST
mtd: spi-nor: spansion: Add support for s25hl02gt and s25hs02gt
mtd: spi-nor: spansion: Add a new ->ready() hook for multi-chip device
mtd: spi-nor: spansion: Rework cypress_nor_quad_enable_volatile() for multi-chip device support
mtd: spi-nor: spansion: Rework cypress_nor_get_page_size() for multi-chip device support
mtd: spi-nor: sfdp: Add support for SCCR map for multi-chip device
mtd: spi-nor: Extract volatile register offset from SCCR map
mtd: spi-nor: Allow post_sfdp hook to return errors
mtd: spi-nor: spansion: Rename method to cypress_nor_get_page_size
mtd: spi-nor: spansion: Enable JFFS2 write buffer for S25FS256T
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s25hx SEMPER flash
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash
mtd: spi-nor: spansion: Determine current address mode
mtd: spi-nor: core: Introduce spi_nor_set_4byte_addr_mode()
mtd: spi-nor: core: Update flash's current address mode when changing address mode
mtd: spi-nor: Stop exporting spi_nor_restore()
mtd: spi-nor: Set the 4-Byte Address Mode method based on SFDP data
mtd: spi-nor: core: Make spi_nor_set_4byte_addr_mode_brwr public
mtd: spi-nor: core: Update name and description of spi_nor_set_4byte_addr_mode
...
The commit 2d78aee426 ("UBI: simplify LEB write and atomic LEB change code")
adds helper function, try_write_vid_and_data(), to simplify the code, but this
helper function has bug, it will return 0 (success) when ubi_io_write_vid_hdr()
or the ubi_io_write_data() return error number (-EIO, etc), because the return
value of ubi_wl_put_peb() will overwrite the original return value.
This issue will cause unexpected data loss issue, because the caller of this
function and UBIFS willn't know the data is lost.
Fixes: 2d78aee426 ("UBI: simplify LEB write and atomic LEB change code")
Cc: stable@vger.kernel.org
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
./drivers/mtd/ubi/build.c:1261:33-38: WARNING: conversion to bool not needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4061
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
* Convert to platform remove callback returning void
* Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
* imx: Remove unused is_imx51_nfc and imx53_nfc functions
* omap2: Drop obsolete dependency on COMPILE_TEST
* orion: Use devm_platform_ioremap_resource()
* qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
* stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
* tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
* hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
* Add support for ESMT F50x1G41LB
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmRANGgACgkQJWrqGEe9
VoRo+wf9EfUFJA84za9m0c51OBDw+yZBpwnHi8zIJ3Rhf19ALluYgxBqsXkR8sYd
gFT3RUnjHsUypnH6Qi0ZBfSQuuH0/Io76TYW+n9ABWSL7zvupyt6biP8l8Rh016X
Y/0Ftxwa5lUkTrZ4w3DdYnPFsAzxfwRFFVPj4mTGK1c/FG8RbyWtyOO2/J0VI+7M
41IR/HKQoaNNnrt+CmxBxqcRuP/nJvwTg//EXetJHlP7pyL8WXw/qQaQxVPfBGYr
U++MGOKIQgZC+ojPTcnSPLLzeo5jaz0lpLFEkcjYjHI8csSB81cIRkUkjIJs02d/
U8fOctks4ipzhoGzHQ+uRGVZ6pyyTw==
=qHKn
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.4' into mtd/next
Raw NAND core changes:
* Convert to platform remove callback returning void
* Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
* imx: Remove unused is_imx51_nfc and imx53_nfc functions
* omap2: Drop obsolete dependency on COMPILE_TEST
* orion: Use devm_platform_ioremap_resource()
* qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
* stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
* tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
* hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
* Add support for ESMT F50x1G41LB
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* introduce Read While Write support for flashes featuring several banks
* set the 4-Byte Address Mode method based on SFDP data
* allow post_sfdp hook to return errors
* parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
* macronix: add support for mx25uw51245g with RWW
* spansion:
- determine current address mode at runtime as it can be changed in a
non-volatile way and differ from factory defaults or from what SFDP
advertises.
- enable JFFS2 write buffer mode for few ECC'd NOR flashes: S25FS256T,
s25hx and s28hx
- add support for s25hl02gt and s25hs02gt
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmQ5ZhIACgkQS1VPR6WN
FOkKRQgAoqUKIUr1m1Bic3gSqB70zsySfo//q/qoPSiXZ0i6y4kfHZXtb55Xekqq
sH5c6wPKbWX4LfSjbkmx7Y8rKmnopI8B7mLPM8cLwCrUdiCvzZlxIC5iHvKo2O5+
V2Aw2QTd3ty3lckw8cmfhfDZMakxRbHRxGMxEpkuAghwSVNZ5p4Df6VRC9nJAats
NO5bBAqx0yQFJeUSvK/0wdPmhglU4K56sp4obhIopem2Nixpp7sI+WawpOOSxhVp
xDrmMBBvoBMwD+92za37qBh2bLXPeo/gP1iQ0Agg/GB8fkVRH4dIe1AwrMs/Ozvz
1ScgmNOiR8VYH49IU25K7a0F3lowcg==
=ST4w
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.4' into mtd/next
SPI NOR core changes:
* introduce Read While Write support for flashes featuring several banks
* set the 4-Byte Address Mode method based on SFDP data
* allow post_sfdp hook to return errors
* parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
* macronix: add support for mx25uw51245g with RWW
* spansion:
- determine current address mode at runtime as it can be changed in a
non-volatile way and differ from factory defaults or from what SFDP
advertises.
- enable JFFS2 write buffer mode for few ECC'd NOR flashes: S25FS256T,
s25hx and s28hx
- add support for s25hl02gt and s25hs02gt
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
- Fix for a stable patch: Fix failure attaching when vid_hdr offset equals to (sub)page size
- Fix for a deadlock in UBI's worker thread
-----BEGIN PGP SIGNATURE-----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=s5M1
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI fixes from Richard Weinberger:
- Fix failure to attach when vid_hdr offset equals the (sub)page size
- Fix for a deadlock in UBI's worker thread
* tag 'ubifs-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size
ubi: Fix deadlock caused by recursively holding work_sem
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # atmel
Reviewed-by: Paul Cercueil <paul@crapouillou.net> # ingenic
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> # ingenic
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # intel
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # meson
Acked-by: Roger Quadros <rogerq@kernel.org> # omap_elm
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Reviewed-by: Heiko Stuebner <heiko@sntech.de> # rockchip
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sunxi
Acked-by: Thierry Reding <treding@nvidia.com> # tegra
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230411113816.3472237-1-u.kleine-koenig@pengutronix.de
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230407190453.66efdf9d@endymion.delvare
For multi-chip devices, we need to make sure the all dice in the device
are ready. The cypress_nor_sr_ready_and_clear() reads SR in each die and
returns true only when all dice are ready. This function also takes care
for program or erase error handling by reusing spansion_nor_clear_sr().
To do that, spansion_nor_clear_sr() is moved to top.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/3e4a64613ee733e002279349c75083433be45bf5.1680849425.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
For multi-chip devices, we can use 512B page only when the all dice are
configured as 512B page size. The volatile register address is calculated
by using the volatile register addresses retrieved from the SCCR tables
and the (configuration) register offset.
The location of cypress_nor_set_page_size() call is moved from
post_bfpt_fixup() to post_sfdp_fixup(), because the number of dice and
volatile register offset are parsed in the optional SCCR tables.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/6f8272f3e877dee392742d2c8401c4aed57e6d83.1680849425.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
SCCR map for multi-chip devices contains the number of additional dice in
the device and register offset values for each additional dice.
spi_nor_parse_sccr_mc() is added to determine the number of dice and
volatile register offset for each die. The volatile register offset table
may already be allocated and contains offset value for die-0 via SCCR map
parse. So, we should use devm_krealloc() to expand the table with
preserving die-0 offset.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/89c892d52f8cbddbd14373f6a02db496885ae4f1.1680849425.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
In use of multi-chip devices, we need to access registers in each die for
configuration and status check. The number of dice in the device and
volatile register offsets for each die are essential to iterate register
access ops.
The volatile register offset for the first die resides in the 1st DWORD
of SCCR map. Allocate the table and copy the offset value.
The table may be allocated when the SCCR map for multi-chip is parsed.
Since we cannot assume SCCR parse is always in ahead of SCCR multi-chip,
we need to check if the table is already allocated or not.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/e2cc39ad6e0e02dd8288c4def9bb201a3f564425.1680849425.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Multi die flashes like s25hl02gt need to determine the page_size at
run-time by querying a configuration register for each die. Since the
number of dice is determined in an optional SFDP table, SCCR MC, the
page size configuration must be done in the post_sfdp hook. Allow
post_sfdp to return errors, as reading the configuration register might
return errors.
Link: https://lore.kernel.org/r/924ab710f128448ec62537cfbb377336e390043c.1680849425.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support. Drop the
comment as the same info is now specified in cypress_nor_ecc_init().
Fixes: 6afcc84080 ("mtd: spi-nor: spansion: Add support for Infineon S25FS256T")
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/641bfb26c6e059915ae920117b7ec278df1a6f0a.1680760742.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support.
Fixes: b6b23833fc ("mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups")
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/a1cc128e094db4ec141f85bd380127598dfef17e.1680760742.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support.
A new SNOR_F_ECC flag is introduced to determine if the part has on-die
ECC and if it has, MTD_BIT_WRITEABLE is unset.
In vendor specific driver, a common cypress_nor_ecc_init() helper is
added. This helper takes care for ECC related initialization for SEMPER
flash family by setting up params->writesize and SNOR_F_ECC.
Fixes: c3266af101 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d586723f6f12aaff44fbcd7b51e674b47ed554ed.1680760742.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Internal address mode (3- or 4-byte) affects to the address length in
Read Any Reg op. Read Any Reg op is used in SMPT parse and other setup
functions. Current driver assumes that address mode is factory default
but users can change it via volatile and non-volatile registers.
Current address mode can be checked by CFR2V[7] but Read Any Reg op is
needed to read CFR2V (chicken-and-egg).
Introduce a way to determine current address mode by comparing status
register 1 values read by different address length.
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20230331074606.3559258-11-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Make the method public, as it will be used as a last resort to enable
4byte address mode when we can't determine the address mode at runtime.
Update the addr_nbytes and current address mode while exiting the 4byte
address mode too, as it may be used in the future by manufacturer
drivers. No functional change. spi_nor_restore didn't update the address
mode nbytes, but updating them now doesn't harm as the method is called
in the driver's remove and shutdown paths.
Link: https://lore.kernel.org/r/20230331074606.3559258-10-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
The bug was obswerved while reading code. There are not many users of
addr_mode_nbytes. Anyway, we should update the flash's current address
mode when changing the address mode, fix it. We don't care for now about
the set_4byte_addr_mode(nor, false) from spi_nor_restore(), as it is
used at driver remove and shutdown.
Fixes: d7931a2150 ("mtd: spi-nor: core: Track flash's internal address mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230331074606.3559258-9-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Some SPI NOR controllers that used this method were moved to
drivers/spi/. We don't accept new support for the existing SPI NOR
controllers drivers under drivers/mtd/spi-nor/controllers/ and we
encourage their owners to move the drivers under drivers/spi/.
Make spi_nor_restore() private as we're going to use it just in core.c.
Link: https://lore.kernel.org/r/20230331074606.3559258-8-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
JESD216 SFDP defines in BFPT methods to enter and exit the
4-Byte Address Mode. The flash parameters and settings that are
retrieved from SFDP have higher precedence than the static
initialized ones, because they should be more accurate and less
error prone than those initialized statically. Parse and favor the
BFPT-parsed set_4byte_addr_mode methods.
Some regressions may be introduced by this patch, because the
params->set_4byte_addr_mode method that was set either in
spi_nor_init_default_params() or later overwritten in default_init()
hooks, are now be overwritten with a different value based on the
BFPT data. If that's the case, the fix is to introduce a post_bfpt
fixup hook where one should fix the wrong BFPT info.
Link: https://lore.kernel.org/r/20230331074606.3559258-7-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
This method can be retrieved at BFPT parsing time. The method is
described in JESD216 BFPT[SFDP_DWORD(16)], BIT(28) and BIT(20).
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230331074606.3559258-6-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Rename method to spi_nor_set_4byte_addr_mode_en4b_ex4b and extend its
description. This method is described in JESD216 BFPT[SFDP_DWORD(16)],
BIT(31) and BIT(23).
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230331074606.3559258-5-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Rename method to spi_nor_set_4byte_addr_mode_brwr and extend its
description. This method is described in JESD216 BFPT[SFDP_DWORD(16)],
BIT(28) and BIT(20).
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230331074606.3559258-4-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Rename method to spi_nor_set_4byte_addr_mode_wren_en4b_ex4b and extend
its description. This method is described in JESD216 BFPT[SFDP_DWORD(16)],
BIT(30) and BIT(22).
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230331074606.3559258-3-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Describe this new part and provide the RWW flag for it.
There is no public datasheet, but here are the sfdp tables plus base
testing to show it works.
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
mx25uw51245g
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
c2813a
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
macronix
$ xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp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$ md5sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
047a884cf44d9ffc2a94d3ab37b48c63 /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
$ dd if=/dev/urandom of=./qspi_test bs=1M count=6
6+0 records in
6+0 records out
$ mtd_debug write /dev/mtd1 0 6291456 qspi_test
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
$ mtd_debug erase /dev/mtd1 0 6291456
Erased 6291456 bytes from address 0x00000000 in flash
$ mtd_debug read /dev/mtd1 0 6291456 qspi_read
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
$ hexdump qspi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0600000
$ mtd_debug write /dev/mtd1 0 6291456 qspi_test
Copied 6291456 bytes from qspi_test to address 0x00000000 in flash
$ mtd_debug read /dev/mtd1 0 6291456 qspi_read
Copied 6291456 bytes from address 0x00000000 in flash to qspi_read
$ sha1sum qspi_test qspi_read
d24a9523db829a0df688f34b8dc76a1383b74024 qspi_test
d24a9523db829a0df688f34b8dc76a1383b74024 qspi_read
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230331194620.839899-2-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Bank size is derived from the chip's size, which in
spi_nor_init_default_params() can still be zero if the flash size is
not specified at flash declaration. Let the flash size be updated
by parsing SFDP and do the initialization of the bank size in
spi_nor_late_init_params(). Flashes that don't define the SFDP tables
must specify the flash size at declaration.
Fixes: 9d6c5d64f0 ("mtd: spi-nor: Introduce the concept of bank")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230331194620.839899-1-miquel.raynal@bootlin.com
[ta: drop superfluous initialization in spi_nor_init_default_params(),
reword commit message, add Fixes tag.]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Valid mask is 0x3FFF, without this patch the following problems were
found:
1) [ 0.938914] Could not find a valid ONFI parameter page, trying
bit-wise majority to recover it
[ 0.947384] ONFI parameter recovery failed, aborting
2) Read with disabled ECC mode was broken.
Fixes: 8fae856c53 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/3794ffbf-dfea-e96f-1f97-fe235b005e19@sberdevices.ru
mtd_read() may return -EUCLEAN in case of corrected bit-flips.This
particular condition should not be treated like an error.
Signed-off-by: Bang Li <libang.linuxer@gmail.com>
Fixes: e47f68587b ("mtd: check for max_bitflips in mtd_read_oob()")
Cc: <stable@vger.kernel.org> # v3.7
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328163012.4264-1-libang.linuxer@gmail.com
Remove the EDO mode support from as the FMC2 controller does not
support the feature.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 2cd457f328 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Cc: stable@vger.kernel.org #v5.4+
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328155819.225521-2-christophe.kerello@foss.st.com
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are 3 small changes for 6.3-rc5 semi-related to driver core stuff:
- documentation update where we move the security_bugs file to a more
relevant location.
- mdt/spi-nor debugfs memory leak fix that's been floating around for
a long time and acked by the maintainer
- cacheinfo bugfix for a regression in 6.3-rc1
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZCmVyg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylq2ACgl6+JkJU4g8mZb1wUel8w8n9u8J8AmQE+DhVz
ER9zOe+7njI+ZAsyUVZl
=d5f4
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small changes for 6.3-rc5 semi-related to driver core
stuff:
- documentation update where we move the security_bugs file to a more
relevant location.
- mdt/spi-nor debugfs memory leak fix that's been floating around for
a long time and acked by the maintainer
- cacheinfo bugfix for a regression in 6.3-rc1
All have been in linux-next with no reported problems"
* tag 'driver-core-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
cacheinfo: Fix LLC is not exported through sysfs
Documentation/security-bugs: move from admin-guide/ to process/
mtd: spi-nor: fix memory leak when using debugfs_lookup()
Following process will make ubi attaching failed since commit
1b42b1a36f ("ubi: ensure that VID header offset ... size"):
ID="0xec,0xa1,0x00,0x15" # 128M 128KB 2KB
modprobe nandsim id_bytes=$ID
flash_eraseall /dev/mtd0
modprobe ubi mtd="0,2048" # set vid_hdr offset as 2048 (one page)
(dmesg):
ubi0 error: ubi_attach_mtd_dev [ubi]: VID header offset 2048 too large.
UBI error: cannot attach mtd0
UBI error: cannot initialize UBI, error -22
Rework original solution, the key point is making sure
'vid_hdr_shift + UBI_VID_HDR_SIZE < ubi->vid_hdr_alsize',
so we should check vid_hdr_shift rather not vid_hdr_offset.
Then, ubi still support (sub)page aligined VID header offset.
Fixes: 1b42b1a36f ("ubi: ensure that VID header offset ... size")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Tested-by: Nicolas Schichan <nschichan@freebox.fr>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> # v5.10, v4.19
Signed-off-by: Richard Weinberger <richard@nod.at>
On devices featuring several banks, the Read While Write (RWW) feature
is here to improve the overall performance when performing parallel
reads and writes at different locations (different banks). The following
constraints have to be taken into account:
1#: A single operation can be performed in a given bank.
2#: Only a single program or erase operation can happen on the entire
chip (common hardware limitation to limit costs)
3#: Reads must remain serialized even though reads crossing bank
boundaries are allowed.
4#: The I/O bus is unique and thus is the most constrained resource, all
spi-nor operations requiring access to the spi bus (through the spi
controller) must be serialized until the bus exchanges are over. So
we must ensure a single operation can be "sent" at a time.
5#: Any other operation that would not be either a read or a write or an
erase is considered requiring access to the full chip and cannot be
parallelized, we then need to ensure the full chip is in the idle
state when this occurs.
All these constraints can easily be managed with a proper locking model:
1#: Is enforced by a bitfield of the in-use banks, so that only a single
operation can happen in a specific bank at any time.
2#: Is handled by the ongoing_pe boolean which is set before any write
or erase, and is released only at the very end of the
operation. This way, no other destructive operation on the chip can
start during this time frame.
3#: An ongoing_rd boolean allows to track the ongoing reads, so that
only one can be performed at a time.
4#: An ongoing_io boolean is introduced in order to capture and serialize
bus accessed. This is the one being released "sooner" than before,
because we only need to protect the chip against other SPI accesses
during the I/O phase, which for the destructive operations is the
beginning of the operation (when we send the command cycles and
possibly the data), while the second part of the operation (the
erase delay or the programmation delay) is when we can do something
else in another bank.
5#: Is handled by the three booleans presented above, if any of them is
set, the chip is not yet ready for the operation and must wait.
All these internal variables are protected by the existing lock, so that
changes in this structure are atomic. The serialization is handled with
a wait queue.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230328154105.448540-8-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Introduce a new (no SFDP) flag for the feature that we are about to
support: Read While Write. This means, if the chip has several banks and
supports RWW, once a page of data to write has been transferred into the
chip's internal SRAM, another read operation happening on a different
bank can be performed during the tPROG delay.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230328154105.448540-7-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
This commit alone just introduces two new "prepare and lock" pairs of
helpers which do the exact same thing as before. They will soon be
improved in a followup commit which actually brings the logic, but I
figured out it was more readable to do it this way.
One new pair is suffixed _pe which stands for "program and erase" and
hence is being called by spi_nor_write() and spi_nor_erase().
The other pair is suffixed _rd which stands for "read" and hence is
being called by spi_nor_read().
One note however, these extra helpers will need to know the operation
range, so they come with two new parameters to define it. Otherwise
there is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230328154105.448540-6-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
While this operation will remain a single function call in the end,
let's extract the logic of the [un]prepare calls within their own static
helper. We will soon add new flavors of the *_[un]prepare_and_[un]lock()
helpers, having the preparation logic outside will save us from duplicating
code over and over again.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230328154105.448540-5-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
The ->prepare()/->unprepare() hooks are now legacy, we no longer accept
new drivers supporting them. The only remaining controllers using them
acquires a per-chip mutex, which should not interfere with the rest of
the operation done in the core. As a result, we should be safe to
reorganize these helpers to first perform the preparation, before
acquiring the core locks. This is necessary in order to be able to
improve the locking mechanism in the core (coming next). No side effects
are expected.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230328154105.448540-4-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Most of the chips on the market only feature a single bank. However, new
chips may support more than a single bank, with the possibility to
parallelize some operations. Let's introduce an INFOB() macro which also
takes a n_bank parameter.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20230328154105.448540-3-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
