In commit 18ff0bcda6 ("ethtool: add interface to interact with Ethernet
Power Equipment"), the 'pse_control_config' structure was introduced,
housing a single member labeled 'admin_cotrol' responsible for maintaining
the operational state of the PoDL PSE functions.
A noticeable typographical error exists in the naming of this field
('cotrol' should be corrected to 'control'), which this commit aims to
rectify.
Furthermore, with upcoming extensions of this structure to encompass PoE
functionalities, the field is being renamed to 'podl_admin_state' to
distinctly indicate that this state is tailored specifically for PoDL."
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-3-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multiple network devices that support hardware timestamping appear to have
common behavior with regards to timestamp handling. Implement common Tx
hardware timestamping statistics in a tx_stats struct_group. Common Rx
hardware timestamping statistics can subsequently be implemented in a
rx_stats struct_group for ethtool_ts_stats.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-2-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 292fac464b ("net: ethtool: eee: Remove legacy _u32 from keee")
this function has no user any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b4ff9b51-092b-4d44-bfce-c95342a05b51@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is used with the set_eee() ethtool operation. Certain
fields of struct ethtool_keee() are relevant only for the get_eee()
operation. In addition, in case of the ioctl interface, we have no
guarantee that userspace sends sane values in struct ethtool_eee.
Therefore explicitly ignore all fields not needed for set_eee().
This protects from drivers trying to use unchecked and unreliable
data, relying on specific userspace behavior.
Note: Such unsafe driver behavior has been found and fixed in the
tg3 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ad7ee11e-eb7a-4975-9122-547e13a161d8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All MAC drivers have been converted to use the link mode members of
keee. So remove the _u32 values, and the code in the ethtool core to
convert the legacy _u32 values to link modes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when you switch between branches or something like that and
rebuild, net/ethtool/ioctl.c has to be built again because it depends
on UTS_RELEASE.
By instead referencing a string variable stored in another object file,
this can be avoided.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240220194244.2056384-1-jannh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
for_each_netdev_dump() can be used with RCU protection,
no need for rtnl if we are going to use dev_hold()/dev_put().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240207153514.3640952-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add linkmode bitmap members to struct ethtool_keee, but keep the legacy
u32 bitmaps for compatibility with existing drivers.
Use linkmode "supported" not being empty as indicator that a user wants
to use the linkmode bitmap members instead of the legacy bitmaps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is in preparation of using the existing names for linkmode
bitmaps.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the following in struct ethtool_keee
- remove member cmd, it's not needed on kernel side
- remove reserved fields
- switch the semantically boolean members to type bool
We don't have to change any user of the boolean members due to the
implicit casting from/to bool. A small change is needed where a
pointer to bool members is used, in addition remove few now unneeded
double negations.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to later extend struct ethtool_keee, we have to decouple it
from the userspace format represented by struct ethtool_eee.
Therefore switch back to struct ethtool_eee, representing the userspace
format, and add conversion between ethtool_eee and ethtool_keee.
Struct ethtool_keee will be changed in follow-up patches, therefore
don't do a *keee = *eee here.
Member cmd isn't copied, because it's not used, and we'll remove
it in the next patch of this series. In addition omit setting cmd
to ETHTOOL_GEEE in the ioctl response, userspace ethtool isn't
interested in it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Accessing an ethernet device that is powered off or clock gated might
cause the CPU to hang. Add ethnl_ops_begin/complete in
ethnl_set_features() to protect against this.
Fixes: 0980bfcd69 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Ludvig Pärsson <ludvig.parsson@axis.com>
Link: https://lore.kernel.org/r/20240117-etht2-v2-1-1a96b6e8c650@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RXFH input_xfrm currently has three supported values: 0 (clear all),
symmetric_xor and NO_CHANGE.
Reject any other value sent from user-space.
Fixes: 13e59344fb ("net: ethtool: add support for symmetric-xor RSS hash")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20240104212653.394424-1-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 13e59344fb ("net: ethtool: add support for symmetric-xor RSS hash")
adds a check to the ethtool set_rxnfc operation, which checks the RX
flow hash if the flag RXH_XFRM_SYM_XOR is set. This flag is introduced
with the same commit. It calls the ethtool get_rxfh operation to get the
RX flow hash data. If get_rxfh is not supported, then EOPNOTSUPP is
returned.
There are driver like tsnep, macb, asp2, genet, gianfar, mtk, ... which
support the ethtool operation set_rxnfc but not get_rxfh. This results
in EOPNOTSUPP returned by ethtool_set_rxnfc() without actually calling
the ethtool operation set_rxnfc. Thus, set_rxnfc got broken for all
these drivers.
Check RX flow hash in ethtool_set_rxnfc() only if driver supports RX
flow hash.
Fixes: 13e59344fb ("net: ethtool: add support for symmetric-xor RSS hash")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20231226205536.32003-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer
from the ethnl request to allow query phy stats from each PHY on the
link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Symmetric RSS hash functions are beneficial in applications that monitor
both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc).
Getting all traffic of the same flow on the same RX queue results in
higher CPU cache efficiency.
A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry
by XORing the source and destination fields and pass the values to the
RSS hash algorithm.
The user may request RSS hash symmetry for a specific algorithm, via:
# ethtool -X eth0 hfunc <hash_alg> symmetric-xor
or turn symmetry off (asymmetric) by:
# ethtool -X eth0 hfunc <hash_alg>
The specific fields for each flow type should then be specified as usual
via:
# ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the RSS context parameters to struct ethtool_rxfh_param and use the
get/set_rxfh to handle the RSS contexts as well.
This is part 2/2 of the fix suggested in [1]:
- Add a rss_context member to the argument struct and a capability
like cap_link_lanes_supported to indicate whether driver supports
rss contexts, then you can remove *et_rxfh_context functions,
and instead call *et_rxfh() with a non-zero rss_context.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Tony Nguyen <anthony.l.nguyen@intel.com>
CC: Marcin Wojtas <mw@semihalf.com>
CC: Russell King <linux@armlinux.org.uk>
CC: Sunil Goutham <sgoutham@marvell.com>
CC: Geetha sowjanya <gakula@marvell.com>
CC: Subbaraya Sundeep <sbhatta@marvell.com>
CC: hariprasad <hkelam@marvell.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
CC: Leon Romanovsky <leon@kernel.org>
CC: Edward Cree <ecree.xilinx@gmail.com>
CC: Martin Habets <habetsm.xilinx@gmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-3-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow up commit 9690ae6042 ("ethtool: add header/data split
indication") and add the set part of Ethtool's header split, i.e.
ability to enable/disable header split via the Ethtool Netlink
interface. This might be helpful to optimize the setup for particular
workloads, for example, to avoid XDP frags, and so on.
A driver should advertise ``ETHTOOL_RING_USE_TCP_DATA_SPLIT`` in its
ops->supported_ring_params to allow doing that. "Unknown" passed from
the userspace when the header split is supported means the driver is
free to choose the preferred state.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231212142752.935000-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use strscpy() to implement ethtool_puts().
Functionally the same as ethtool_sprintf() when it's used with two
arguments or with just "%s" format specifier.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Madhuri Sripada <madhuri.sripada@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are multiple ways to query for the carrier state: through
rtnetlink, sysfs, and (possibly) ethtool. Synchronize linkwatch
work before these operations so that we don't have a situation
where userspace queries the carrier state between the driver's
carrier off->on transition and linkwatch running and expects it
to work, when really (at least) TX cannot work until linkwatch
has run.
I previously posted a longer explanation of how this applies to
wireless [1] but with this wireless can simply query the state
before sending data, to ensure the kernel is ready for it.
[1] https://lore.kernel.org/all/346b21d87c69f817ea3c37caceb34f1f56255884.camel@sipsolutions.net/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231204214706.303c62768415.I1caedccae72ee5a45c9085c5eb49c145ce1c0dd5@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default dump handler needs to clear ret before returning.
Otherwise if the last interface returns an inconsequential
error this error will propagate to user space.
This may confuse user space (ethtool CLI seems to ignore it,
but YNL doesn't). It will also terminate the dump early
for mutli-skb dump, because netlink core treats EOPNOTSUPP
as a real error.
Fixes: 728480f124 ("ethtool: default handlers for GET requests")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert following commits:
commit acec05fb78 ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask")
commit 11d55be06d ("net: ethtool: Add a command to expose current time stamping layer")
commit bb8645b00c ("netlink: specs: Introduce new netlink command to get current timestamp")
commit d905f9c753 ("net: ethtool: Add a command to list available time stamping layers")
commit aed5004ee7 ("netlink: specs: Introduce new netlink command to list available time stamping layers")
commit 51bdf3165f ("net: Replace hwtstamp_source by timestamping layer")
commit 0f7f463d48 ("net: Change the API of PHY default timestamp to MAC")
commit 091fab1228 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp")
commit 152c75e1d0 ("net: ethtool: ts: Let the active time stamping layer be selectable")
commit ee60ea6be0 ("netlink: specs: Introduce time stamping set command")
They need more time for reviews.
Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the current timestamp is saved in a variable lets add the
ETHTOOL_MSG_TS_SET ethtool netlink socket to make it selectable.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the default selected timestamp API change we have to change also the
timestamp return by ethtool. This patch return now the current selected
timestamp.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the API to select MAC default time stamping instead of the PHY.
Indeed the PHY is closer to the wire therefore theoretically it has less
delay than the MAC timestamping but the reality is different. Due to lower
time stamping clock frequency, latency in the MDIO bus and no PHC hardware
synchronization between different PHY, the PHY PTP is often less precise
than the MAC. The exception is for PHY designed specially for PTP case but
these devices are not very widespread. For not breaking the compatibility I
introduce a default_timestamp flag in phy_device that is set by the phy
driver to know we are using the old API behavior.
The phy_set_timestamp function is called at each call of phy_attach_direct.
In case of MAC driver using phylink this function is called when the
interface is turned up. Then if the interface goes down and up again the
last choice of timestamp will be overwritten by the default choice.
A solution could be to cache the timestamp status but it can bring other
issues. In case of SFP, if we change the module, it doesn't make sense to
blindly re-set the timestamp back to PHY, if the new module has a PHY with
mediocre timestamping capabilities.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new netlink message that lists all available time stamping
layers on a given interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Time stamping on network packets may happen either in the MAC or in
the PHY, but not both. In preparation for making the choice
selectable, expose both the current layers via ethtool.
In accordance with the kernel implementation as it stands, the current
layer will always read as "phy" when a PHY time stamping device is
present. Future patches will allow changing the current layer
administratively.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vlan, macvlan and the bonding drivers call their "real" device driver
in order to report the time stamping capabilities. Provide a core
ethtool helper function to avoid copy/paste in the stack.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 26c5334d34 ("ethtool: Add forced speed to supported link
modes maps") added a dependency between ethtool.h and linkmode.h.
The dependency in the opposite direction already exists so the
new code was inserted in an awkward place.
The reason for ethtool.h to include linkmode.h, is that
ethtool_forced_speed_maps_init() is a static inline helper.
That's not really necessary.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 108a36d07c.
It was reported that this fix breaks the possibility to remove existing WoL
flags. For example:
~$ ethtool lan2
...
Supports Wake-on: pg
Wake-on: d
...
~$ ethtool -s lan2 wol gp
~$ ethtool lan2
...
Wake-on: pg
...
~$ ethtool -s lan2 wol d
~$ ethtool lan2
...
Wake-on: pg
...
This worked correctly before this commit because we were always updating
a zero bitmap (since commit 6699170376 ("ethtool: fix application of
verbose no_mask bitset"), that is) so that the rest was left zero
naturally. But now the 1->0 change (old_val is true, bit not present in
netlink nest) no longer works.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/netdev/20231019095140.l6fffnszraeb6iiw@lion.mk-sys.cz/
Cc: stable@vger.kernel.org
Fixes: 108a36d07c ("ethtool: Fix mod state of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20231019-feature_ptp_bitset_fix-v1-1-70f3c429a221@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit
6699170376 fixes this issue by clearing the whole target bitmap before we
start iterating. The solution proposed brought an issue with the behavior
of the mod variable. As the bitset is always cleared the old val will
always differ to the new val.
Fix it by adding a new temporary variable which save the state of the old
bitmap.
Fixes: 6699170376 ("ethtool: fix application of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009133645.44503-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ETHTOOL_A_PLCA_ENABLED data type is u8. But while parsing the
value from the attribute, nla_get_u32() is used in the plca_update_sint()
function instead of nla_get_u8(). So plca_cfg.enabled variable is updated
with some garbage value instead of 0 or 1 and always enables plca even
though plca is disabled through ethtool application. This bug has been
fixed by parsing the values based on the attributes type in the policy.
Fixes: 8580e16c28 ("net/ethtool: add netlink interface for the PLCA RS")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230908044548.5878-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data implementations would try to access info->extack
leading to a null-deref.
Now that dumps and notifications can access struct genl_info
we can pass it in, and remove the info null checks.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # pause
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since dumps carry struct genl_info now, use the attrs pointer
from genl_info and remove the one in struct genl_dumpit_info.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_init() and phy_exit() will have to do more stuff under rtnl_lock()
in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot
of stuff under the hood, it's a pity to lock and unlock the rtnetlink
mutex twice in a row.
Change the calling convention such that the only caller of
ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where
the rtnl_mutex is already acquired.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
