When removing the device we call blkdev_put() on the device once we've
removed it, and because we have an EXCL open we need to take the
->open_mutex on the block device to clean it up. Unfortunately during
device remove we are holding the sb writers lock, which results in the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #407 Not tainted
------------------------------------------------------
losetup/11595 is trying to acquire lock:
ffff973ac35dd138 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_put+0x3a/0x220
btrfs_rm_device.cold+0x62/0xe5
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11595:
#0: ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 0 PID: 11595 Comm: losetup Not tainted 5.14.0-rc2+ #407
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc21255d4cb
So instead save the bdev and do the put once we've dropped the sb
writers lock in order to avoid the lockdep recursion.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We update the ctime/mtime of a block device when we remove it so that
blkid knows the device changed. However we do this by re-opening the
block device and calling filp_update_time. This is more correct because
it'll call the inode->i_op->update_time if it exists, but the block dev
inodes do not do this. Instead call generic_update_time() on the
bd_inode in order to avoid the blkdev_open path and get rid of the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #406 Not tainted
------------------------------------------------------
losetup/11596 is trying to acquire lock:
ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_get_by_dev.part.0+0x56/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
file_open_name+0xc7/0x170
filp_open+0x2c/0x50
btrfs_scratch_superblocks.part.0+0x10f/0x170
btrfs_rm_device.cold+0xe8/0xed
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11596:
#0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ #406
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
asm/do_div.h is for div_u64, but it is found in math64.h. This change
will make compiler job easier and prevent compiler errors in situation
where compiler will not find math64.h from another paths.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mount option max_inline ranges from 0 to the sectorsize (which is
now equal to page size). But we parse the mount options too early and
before the actual sectorsize is read from the superblock. So the upper
limit of max_inline is unaware of the actual sectorsize and is limited
by the temporary sectorsize 4096, even on a system where the default
sectorsize is 64K.
Fix this by reading the superblock sectorsize before the mount option
parse.
Reported-by: Alexander Tsvetkov <alexander.tsvetkov@oracle.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This crash was observed with a failed assertion on device close:
BTRFS: Transaction aborted (error -28)
WARNING: CPU: 1 PID: 3902 at fs/btrfs/extent-tree.c:2150 btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c crc32c_intel xor zstd_decompress zstd_compress xxhash lzo_compress lzo_decompress raid6_pq loop
CPU: 1 PID: 3902 Comm: kworker/u8:4 Not tainted 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
RIP: 0010:btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
RSP: 0018:ffffb7a5452d7d80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff97834176a378 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff97835195d388
R13: 0000000005b08000 R14: ffff978385484000 R15: 000000000000016c
FS: 0000000000000000(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190d003fe8 CR3: 000000002a81e005 CR4: 0000000000170ea0
Call Trace:
flush_space+0x197/0x2f0 [btrfs]
btrfs_async_reclaim_metadata_space+0x139/0x300 [btrfs]
process_one_work+0x262/0x5e0
worker_thread+0x4c/0x320
? process_one_work+0x5e0/0x5e0
kthread+0x144/0x170
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
irq event stamp: 19334989
hardirqs last enabled at (19334997): [<ffffffffab0e0c87>] console_unlock+0x2b7/0x400
hardirqs last disabled at (19335006): [<ffffffffab0e0d0d>] console_unlock+0x33d/0x400
softirqs last enabled at (19334900): [<ffffffffaba0030d>] __do_softirq+0x30d/0x574
softirqs last disabled at (19334893): [<ffffffffab0721ec>] irq_exit_rcu+0x12c/0x140
---[ end trace 45939e308e0dd3c7 ]---
BTRFS: error (device vdd) in btrfs_run_delayed_refs:2150: errno=-28 No space left
BTRFS info (device vdd): forced readonly
BTRFS warning (device vdd): failed setting block group ro: -30
BTRFS info (device vdd): suspending dev_replace for unmount
assertion failed: !test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state), in fs/btrfs/volumes.c:1150
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3431!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 3982 Comm: umount Tainted: G W 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
RSP: 0018:ffffb7a5454c7db8 EFLAGS: 00010246
RAX: 0000000000000068 RBX: ffff978364b91c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff9783523a4c00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9783523a4d18
R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000003
FS: 00007f61c8f42800(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190cffa810 CR3: 0000000030b96002 CR4: 0000000000170ea0
Call Trace:
btrfs_close_one_device.cold+0x11/0x55 [btrfs]
close_fs_devices+0x44/0xb0 [btrfs]
btrfs_close_devices+0x48/0x160 [btrfs]
generic_shutdown_super+0x69/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x2c/0xa0
cleanup_mnt+0x144/0x1b0
task_work_run+0x59/0xa0
exit_to_user_mode_loop+0xe7/0xf0
exit_to_user_mode_prepare+0xaf/0xf0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x4a/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
This happens when close_ctree is called while a dev_replace hasn't
completed. In close_ctree, we suspend the dev_replace, but keep the
replace target around so that we can resume the dev_replace procedure
when we mount the root again. This is the call trace:
close_ctree():
btrfs_dev_replace_suspend_for_unmount();
btrfs_close_devices():
btrfs_close_fs_devices():
btrfs_close_one_device():
ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT,
&device->dev_state));
However, since the replace target sticks around, there is a device
with BTRFS_DEV_STATE_REPLACE_TGT set on close, and we fail the
assertion in btrfs_close_one_device.
To fix this, if we come across the replace target device when
closing, we should properly reset it back to allocation state. This
fix also ensures that if a non-target device has a corrupted state and
has the BTRFS_DEV_STATE_REPLACE_TGT bit set, the assertion will still
catch the error.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: b2a6166768 ("btrfs: fix rw device counting in __btrfs_free_extra_devids")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_lookup_ordered_extent() is supposed to query the offset in a file
instead of the logical address. Pass the file offset from
submit_extent_page() to calc_bio_boundaries().
Also, calc_bio_boundaries() relies on the bio's operation flag, so move
the call site after setting it.
Fixes: 390ed29b81 ("btrfs: refactor submit_extent_page() to make bio and its flag tracing easier")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A common characteristic of the bug report where preemptive flushing was
going full tilt was the fact that the vast majority of the free metadata
space was used up by the global reserve. The hard 90% threshold would
cover the majority of these cases, but to be even smarter we should take
into account how much of the outstanding reservations are covered by the
global block reserve. If the global block reserve accounts for the vast
majority of outstanding reservations, skip preemptive flushing, as it
will likely just cause churn and pain.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212185
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The preemptive flushing code was added in order to avoid needing to
synchronously wait for ENOSPC flushing to recover space. Once we're
almost full however we can essentially flush constantly. We were using
98% as a threshold to determine if we were simply full, however in
practice this is a really high bar to hit. For example reports of
systems running into this problem had around 94% usage and thus
continued to flush. Fix this by lowering the threshold to 90%, which is
a more sane value, especially for smaller file systems.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212185
CC: stable@vger.kernel.org # 5.12+
Fixes: 576fa34830 ("btrfs: improve preemptive background space flushing")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_lookup_data_extent calls btrfs_search_slot to verify if
the EXTENT_ITEM exists in the extent tree. btrfs_search_slot can return
values bellow zero if an error happened.
Function replay_one_extent currently checks if the search found
something (0 returned) and increments the reference, and if not, it
seems to evaluate as 'not found'.
Fix the condition by checking if the value was bellow zero and return
early.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several cases where when logging an inode we need to log its
parent directories or logging subdirectories when logging a directory.
There are cases however where we end up logging a directory even if it was
not changed in the current transaction, no dentries added or removed since
the last transaction. While this is harmless from a functional point of
view, it is a waste time as it brings no advantage.
One example where this is triggered is the following:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/A
$ mkdir /mnt/B
$ mkdir /mnt/C
$ touch /mnt/A/foo
$ ln /mnt/A/foo /mnt/B/bar
$ ln /mnt/A/foo /mnt/C/baz
$ sync
$ rm -f /mnt/A/foo
$ xfs_io -c "fsync" /mnt/B/bar
This last fsync ends up logging directories A, B and C, however we only
need to log directory A, as B and C were not changed since the last
transaction commit.
So fix this by changing need_log_inode(), to return false in case the
given inode is a directory and has a ->last_trans value smaller than the
current transaction's ID.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we converted btrfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag. We only need to raise this flag on the btrfs_root_fs_type
filesystem since btrfs_mount_root() is ultimately responsible for
allocating the superblock and is called into from btrfs_mount()
associated with btrfs_fs_type.
The conversion of the btrfs inode operations was straightforward.
Regarding btrfs specific ioctls that perform checks based on inode
permissions only those have been allowed that are not filesystem wide
operations and hence can be reasonably charged against a specific mount.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make the ACL code idmapped mount aware. The POSIX default and POSIX
access ACLs are the only ACLs other than some specific xattrs that take
DAC permissions into account. On an idmapped mount they need to be
translated according to the mount's userns. The main change is done to
__btrfs_set_acl() which is responsible for translating POSIX ACLs to
their final on-disk representation.
The btrfs_init_acl() helper does not need to take the idmapped mount
into account since it is called in the context of file creation
operations (mknod, create, mkdir, symlink, tmpfile) and is used for
btrfs_init_inode_security() to copy POSIX default and POSIX access
permissions from the parent directory. These ACLs need to be inherited
unmodified from the parent directory. This is identical to what we do
for ext4 and xfs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The INO_LOOKUP_USER is an unprivileged version of the INO_LOOKUP ioctl
and has the following restrictions. The main difference between the two
is that INO_LOOKUP is filesystem wide operation wheres INO_LOOKUP_USER
is scoped beneath the file descriptor passed with the ioctl.
Specifically, INO_LOOKUP_USER must adhere to the following restrictions:
- The caller must be privileged over each inode of each path component
for the path they are trying to lookup.
- The path for the subvolume the caller is trying to lookup must be reachable
from the inode associated with the file descriptor passed with the ioctl.
The second condition makes it possible to scope the lookup of the path
to the mount identified by the file descriptor passed with the ioctl.
This allows us to enable this ioctl on idmapped mounts.
Specifically, this is possible because all child subvolumes of a parent
subvolume are reachable when the parent subvolume is mounted. So if the
user had access to open the parent subvolume or has been given the fd
then they can lookup the path if they had access to it provided they
were privileged over each path component.
Note, the INO_LOOKUP_USER ioctl allows a user to learn the path and name
of a subvolume even though they would otherwise be restricted from doing
so via regular VFS-based lookup.
So think about a parent subvolume with multiple child subvolumes.
Someone could mount he parent subvolume and restrict access to the child
subvolumes by overmounting them with empty directories. At this point
the user can't traverse the child subvolumes and they can't open files
in the child subvolumes. However, they can still learn the path of
child subvolumes as long as they have access to the parent subvolume by
using the INO_LOOKUP_USER ioctl.
The underlying assumption here is that it's ok that the lookup ioctls
can't really take mounts into account other than the original mount the
fd belongs to during lookup. Since this assumption is baked into the
original INO_LOOKUP_USER ioctl we can extend it to idmapped mounts.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Setting flags on subvolumes or snapshots are core features of btrfs. The
SUBVOL_SETFLAGS ioctl is especially important as it allows to make
subvolumes and snapshots read-only or read-write. Allow setting flags on
btrfs subvolumes and snapshots on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The SET_RECEIVED_SUBVOL ioctls are used to set information about
a received subvolume. Make it possible to set information about a
received subvolume on idmapped mounts. This is a fairly straightforward
operation since all the permission checking helpers are already capable
of handling idmapped mounts. So we just need to pass down the mount's
userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So far we prevented the deletion of subvolumes and snapshots using
subvolume ids possible with the BTRFS_SUBVOL_SPEC_BY_ID flag.
This restriction is necessary on idmapped mounts as this allows
filesystem wide subvolume and snapshot deletions and thus can escape the
scope of what's exposed under the mount identified by the fd passed with
the ioctl.
Deletion by subvolume id works by looking for an alias of the parent of
the subvolume or snapshot to be deleted. The parent alias can be
anywhere in the filesystem. However, as long as the alias of the parent
that is found is the same as the one identified by the file descriptor
passed through the ioctl we can allow the deletion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Destroying subvolumes and snapshots are important features of btrfs.
Both operations are available to unprivileged users if the filesystem
has been mounted with the "user_subvol_rm_allowed" mount option. Allow
subvolume and snapshot deletion on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Subvolumes and snapshots can either be deleted by specifying their name
or - if BTRFS_IOC_SNAP_DESTROY_V2 is used - by their subvolume or
snapshot id if the BTRFS_SUBVOL_SPEC_BY_ID is set.
This feature is blocked on idmapped mounts as this allows filesystem
wide subvolume deletions and thus can escape the scope of what's exposed
under the mount identified by the fd passed with the ioctl.
This means that even the root or CAP_SYS_ADMIN capable user can't delete
a subvolume via BTRFS_SUBVOL_SPEC_BY_ID. This is intentional.
The root user is currently already subject to permission checks in
btrfs_may_delete() including whether the inode's i_uid/i_gid of the
directory the subvolume is located in have a mapping in the caller's
idmapping. For this to fail isn't currently possible since a btrfs
filesystem can't be mounted with a non-initial idmapping but it shows
that even the root user would fail to delete a subvolume if the relevant
inode isn't mapped in their idmapping. The idmapped mount case is the
same in principle.
This isn't a huge problem a root user wanting to delete arbitrary
subvolumes can just always create another (even detached) mount without
an idmapping attached.
In addition, we will allow BTRFS_SUBVOL_SPEC_BY_ID for cases where the
subvolume to delete is directly located under inode referenced by the fd
passed for the ioctl() in a follow-up commit.
Here is an example where a btrfs subvolume is deleted through a
subvolume mount that does not expose the subvolume to be delete but it
can still be deleted by using the subvolume id:
/* Compile the following program as "delete_by_spec". */
#define _GNU_SOURCE
#include <fcntl.h>
#include <inttypes.h>
#include <linux/btrfs.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
static int rm_subvolume_by_id(int fd, uint64_t subvolid)
{
struct btrfs_ioctl_vol_args_v2 args = {};
int ret;
args.flags = BTRFS_SUBVOL_SPEC_BY_ID;
args.subvolid = subvolid;
ret = ioctl(fd, BTRFS_IOC_SNAP_DESTROY_V2, &args);
if (ret < 0)
return -1;
return 0;
}
int main(int argc, char *argv[])
{
int subvolid = 0;
if (argc < 3)
exit(1);
fprintf(stderr, "Opening %s\n", argv[1]);
int fd = open(argv[1], O_CLOEXEC | O_DIRECTORY);
if (fd < 0)
exit(2);
subvolid = atoi(argv[2]);
fprintf(stderr, "Deleting subvolume with subvolid %d\n", subvolid);
int ret = rm_subvolume_by_id(fd, subvolid);
if (ret < 0)
exit(3);
exit(0);
}
#include <stdio.h>"
#include <stdlib.h>"
#include <linux/btrfs.h"
truncate -s 10G btrfs.img
mkfs.btrfs btrfs.img
export LOOPDEV=$(sudo losetup -f --show btrfs.img)
mount ${LOOPDEV} /mnt
sudo chown $(id -u):$(id -g) /mnt
btrfs subvolume create /mnt/A
btrfs subvolume create /mnt/B/C
# Get subvolume id via:
sudo btrfs subvolume show /mnt/A
# Save subvolid
SUBVOLID=<nr>
sudo umount /mnt
sudo mount ${LOOPDEV} -o subvol=B/C,user_subvol_rm_allowed /mnt
./delete_by_spec /mnt ${SUBVOLID}
With idmapped mounts this can potentially be used by users to delete
subvolumes/snapshots they would otherwise not have access to as the
idmapping would be applied to an inode that is not exposed in the mount
of the subvolume.
The fact that this is a filesystem wide operation suggests it might be a
good idea to expose this under a separate ioctl that clearly indicates
this. In essence, the file descriptor passed with the ioctl is merely
used to identify the filesystem on which to operate when
BTRFS_SUBVOL_SPEC_BY_ID is used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Creating subvolumes and snapshots is one of the core features of btrfs
and is even available to unprivileged users. Make it possible to use
subvolume and snapshot creation on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a new subvolume is created btrfs currently doesn't check whether
the fsgid/fsuid of the caller actually have a mapping in the user
namespace attached to the filesystem. The VFS always checks this to make
sure that the caller's fsgid/fsuid can be represented on-disk. This is
most relevant for filesystems that can be mounted inside user namespaces
but it is in general a good hardening measure to prevent unrepresentable
gid/uid from being written to disk.
Since we want to support idmapped mounts for btrfs ioctls to create
subvolumes in follow-up patches this becomes important since we want to
make sure the fsgid/fsuid of the caller as mapped according to the
idmapped mount can be represented on-disk. Simply add the missing
fsuidgid_has_mapping() line from the VFS may_create() version to
btrfs_may_create().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_permission() to handle idmapped mounts. This is just a
matter of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_setattr() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_tmpfile() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_symlink() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_mkdir() to handle idmapped mounts. This is just a matter of
passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_create() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_mknod() to handle idmapped mounts. This is just a matter of
passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_getattr() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_rename() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extend btrfs_new_inode() to take the idmapped mount into account when
initializing a new inode. This is just a matter of passing down the
mount's userns. The rest is taken care of in inode_init_owner(). This is
a preliminary patch to make the individual btrfs inode operations
idmapped mount aware.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Various filesystems rely on the lookup_one_len() helper to lookup a
single path component relative to a well-known starting point. Allow
such filesystems to support idmapped mounts by adding a version of this
helper to take the idmap into account when calling inode_permission().
This change is a required to let btrfs (and other filesystems) support
idmapped mounts.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sysfs file has grown big. It takes some time to locate the correct
struct attribute to add new files. Create a table and map the struct
attribute to its sysfs path.
Also, fix the comment about the debug sysfs path. And add the comments
to the attributes instead of attribute group, where sysfs file names are
defined.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
It's easy to trigger NULL pointer dereference, just by removing a
non-existing device id:
# mkfs.btrfs -f -m single -d single /dev/test/scratch1 \
/dev/test/scratch2
# mount /dev/test/scratch1 /mnt/btrfs
# btrfs device remove 3 /mnt/btrfs
Then we have the following kernel NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 649 Comm: btrfs Not tainted 5.14.0-rc3-custom+ #35
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:btrfs_rm_device+0x4de/0x6b0 [btrfs]
btrfs_ioctl+0x18bb/0x3190 [btrfs]
? lock_is_held_type+0xa5/0x120
? find_held_lock.constprop.0+0x2b/0x80
? do_user_addr_fault+0x201/0x6a0
? lock_release+0xd2/0x2d0
? __x64_sys_ioctl+0x83/0xb0
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
[CAUSE]
Commit a27a94c2b0 ("btrfs: Make btrfs_find_device_by_devspec return
btrfs_device directly") moves the "missing" device path check into
btrfs_rm_device().
But btrfs_rm_device() itself can have case where it only receives
@devid, with NULL as @device_path.
In that case, calling strcmp() on NULL will trigger the NULL pointer
dereference.
Before that commit, we handle the "missing" case inside
btrfs_find_device_by_devspec(), which will not check @device_path at all
if @devid is provided, thus no way to trigger the bug.
[FIX]
Before calling strcmp(), also make sure @device_path is not NULL.
Fixes: a27a94c2b0 ("btrfs: Make btrfs_find_device_by_devspec return btrfs_device directly")
CC: stable@vger.kernel.org # 5.4+
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We call split_zoned_em() on an extent_map on submitting a bio for it. Thus,
we can assume the extent_map is PINNED, not LOGGING, and in the modified
list. Add ASSERT()s to ensure the extent_maps after the split also has the
proper flags set and are in the modified list.
Suggested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
alloc_offset is offset from the start of a block group and @offset is
actually an address in logical space. Thus, we need to consider
block_group->start when calculating them.
Fixes: 011b41bffa ("btrfs: zoned: advance allocation pointer after tree log node")
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_relocate_chunk() can fail with -EAGAIN when e.g. send operations are
running. The message can fail btrfs/187 and it's unnecessary because we
anyway add it back to the reclaim list.
btrfs_reclaim_bgs_work()
`-> btrfs_relocate_chunk()
`-> btrfs_relocate_block_group()
`-> reloc_chunk_start()
`-> if (fs_info->send_in_progress)
`-> return -EAGAIN
CC: stable@vger.kernel.org # 5.13+
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Automatically reclaiming dirty zones might not always be desired for all
workloads, especially as there are currently still some rough edges with
the relocation code on zoned filesystems.
Allow disabling zone auto reclaim on a per filesystem basis by writing 0
as the threshold value.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A comment at log_conflicting_inodes() mentions that we check the inode's
logged_trans field instead of using btrfs_inode_in_log() because the field
last_log_commit is not updated when we log that an inode exists and the
inode has the full sync flag (BTRFS_INODE_NEEDS_FULL_SYNC) set. The part
about the full sync flag is not true anymore since commit 9acc8103ab
("btrfs: fix unpersisted i_size on fsync after expanding truncate"), so
update the comment to not mention that part anymore.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we are checking if the inode's logged_trans is 0 to detect the
possibility of the inode having been evicted and reloaded, the test for
the full sync flag (BTRFS_INODE_NEEDS_FULL_SYNC) is no longer needed at
tree-log.c:inode_logged(). Its purpose was to detect the possibility
of a previous eviction as well, since when an inode is loaded the full
sync flag is always set on it (and only cleared after the inode is
logged).
So just remove the check and update the comment. The check for the inode's
logged_trans being 0 was added recently by the patch with the subject
"btrfs: eliminate some false positives when checking if inode was logged".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the very end of btrfs_rename_exchange(), in case an error happened, we
are checking if 'new_inode' is NULL, but that is not needed since during a
rename exchange, unlike regular renames, 'new_inode' can never be NULL,
and if it were, we would have a crashed much earlier when we dereference it
multiple times.
So remove the check because it is not necessary and because it is causing
static checkers to emit a warning. I probably introduced the check by
copy-pasting similar code from btrfs_rename(), where 'new_inode' can be
NULL, in commit 86e8aa0e77 ("Btrfs: unpin logs if rename exchange
operation fails").
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate backref_ctx, allocate backref_ctx
on stack. The size is reasonably small.
sizeof(backref_ctx) = 48
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate btrfs_ioctl_defrag_range_args,
allocate btrfs_ioctl_defrag_range_args on stack, the size is reasonably
small and ioctls are called in process context.
sizeof(btrfs_ioctl_defrag_range_args) = 48
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate btrfs_ioctl_quota_rescan_args,
allocate btrfs_ioctl_quota_rescan_args on stack, the size is reasonably
small and ioctls are called in process context.
sizeof(btrfs_ioctl_quota_rescan_args) = 64
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's a common practice to start a search using offset (u64)-1, which is
the u64 maximum value, meaning that we want the search_slot function to
be set in the last item with the same objectid and type.
Once we are in this position, it's a matter to start a search backwards
by calling btrfs_previous_item, which will check if we'll need to go to
a previous leaf and other necessary checks, only to be sure that we are
in last offset of the same object and type.
The new btrfs_search_backwards function does the all these steps when
necessary, and can be used to avoid code duplication.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As fsverity support depends on a config option, print that at module
load time like we do for similar features.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Writing out the verity data is too large of an operation to do in a
single transaction. If we are interrupted before we finish creating
fsverity metadata for a file, or fail to clean up already created
metadata after a failure, we could leak the verity items that we already
committed.
To address this issue, we use the orphan mechanism. When we start
enabling verity on a file, we also add an orphan item for that inode.
When we are finished, we delete the orphan. However, if we are
interrupted midway, the orphan will be present at mount and we can
cleanup the half-formed verity state.
There is a possible race with a normal unlink operation: if unlink and
verity run on the same file in parallel, it is possible for verity to
succeed and delete the still legitimate orphan added by unlink. Then, if
we are interrupted and mount in that state, we will never clean up the
inode properly. This is also possible for a file created with O_TMPFILE.
Check nlink==0 before deleting to avoid this race.
A final thing to note is that this is a resurrection of using orphans to
signal an operation besides "delete this inode". The old case was to
signal the need to do a truncate. That case still technically applies
for mounting very old file systems, so we need to take some care to not
clobber it. To that end, we just have to be careful that verity orphan
cleanup is a no-op for non-verity files.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.
Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.
Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.
Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.
Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, inode flags are fully backwards incompatible in btrfs. If we
introduce a new inode flag, then tree-checker will detect it and fail.
This can even cause us to fail to mount entirely. To make it possible to
introduce new flags which can be read-only compatible, like VERITY, we
add new ro flags to btrfs without treating them quite so harshly in
tree-checker. A read-only file system can survive an unexpected flag,
and can be mounted.
As for the implementation, it unfortunately gets a little complicated.
The on-disk representation of the inode, btrfs_inode_item, has an __le64
for flags but the in-memory representation, btrfs_inode, uses a u32.
David Sterba had the nice idea that we could reclaim those wasted 32 bits
on disk and use them for the new ro_compat flags.
It turns out that the tree-checker code which checks for unknown flags
is broken, and ignores the upper 32 bits we are hoping to use. The issue
is that the flags use the literal 1 rather than 1ULL, so the flags are
signed ints, and one of them is specifically (1 << 31). As a result, the
mask which ORs the flags is a negative integer on machines where int is
32 bit twos complement. When tree-checker evaluates the expression:
btrfs_inode_flags(leaf, iitem) & ~BTRFS_INODE_FLAG_MASK)
The mask is something like 0x80000abc, which gets promoted to u64 with
sign extension to 0xffffffff80000abc. Negating that 64 bit mask leaves
all the upper bits zeroed, and we can't detect unexpected flags.
This suggests that we can't use those bits after all. Luckily, we have
good reason to believe that they are zero anyway. Inode flags are
metadata, which is always checksummed, so any bit flips that would
introduce 1s would cause a checksum failure anyway (excluding the
improbable case of the checksum getting corrupted exactly badly).
Further, unless the 1 << 31 flag is used, the cast to u64 of the 32 bit
inode flag should preserve its value and not add leading zeroes
(at least for twos complement). The only place that flag
(BTRFS_INODE_ROOT_ITEM_INIT) is used is in a special inode embedded in
the root item, and indeed for that inode we see 0xffffffff80000000 as
the flags on disk. However, that inode is never seen by tree checker,
nor is it used in a context where verity might be meaningful.
Theoretically, a future ro flag might cause trouble on that inode, so we
should proactively clean up that mess before it does.
With the introduction of the new ro flags, keep two separate unsigned
masks and check them against the appropriate u32. Since we no longer run
afoul of sign extension, this also stops writing out 0xffffffff80000000
in root_item inodes going forward.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_check_raid_min_devices() returns error code from the enum
btrfs_err_code and it starts from 1. So there is no need to check if ret
is > 0. So drop this check and also drop the local variable ret.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_run_delalloc_range() failed, we will error out.
But there is a strange comment mentioning that
btrfs_run_delalloc_range() could have returned value >0 to indicate the
IO has already started.
Commit 40f765805f ("Btrfs: split up __extent_writepage to lower stack
usage") introduced the comment, but unfortunately at that time, we were
already using @page_started to indicate that case, and still return 0.
Furthermore, even if that comment was right (which is not), we would
return -EIO if the IO had already started.
By all means the comment is incorrect, just remove the comment along
with the dead check.
Just to be extra safe, add an ASSERT() in btrfs_run_delalloc_range() to
make sure we either return 0 or error, no positive return value.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
