Use appropriate frag_page API instead of caller accessing
'page_frag_cache' directly.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20241028115343.3405838-5-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are about to use page_frag_alloc_*() API to not just
allocate memory for skb->data, but also use them to do
the memory allocation for skb frag too. Currently the
implementation of page_frag in mm subsystem is running
the offset as a countdown rather than count-up value,
there may have several advantages to that as mentioned
in [1], but it may have some disadvantages, for example,
it may disable skb frag coalescing and more correct cache
prefetching
We have a trade-off to make in order to have a unified
implementation and API for page_frag, so use a initial zero
offset in this patch, and the following patch will try to
make some optimization to avoid the disadvantages as much
as possible.
1. https://lore.kernel.org/all/f4abe71b3439b39d17a6fb2d410180f367cadf5c.camel@gmail.com/
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-4-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The testing is done by ensuring that the fragment allocated
from a frag_frag_cache instance is pushed into a ptr_ring
instance in a kthread binded to a specified cpu, and a kthread
binded to a specified cpu will pop the fragment from the
ptr_ring and free the fragment.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Linux-MM <linux-mm@kvack.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/20241028115343.3405838-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the original conversion is from the spatch below,
but I edited some and left out other instances that were
either buggy after conversion (where default values don't
fit into the type) or just looked strange.
@@
expression attr, def;
expression val;
identifier fn =~ "^nla_get_.*";
fresh identifier dfn = fn ## "_default";
@@
(
-if (attr)
- val = fn(attr);
-else
- val = def;
+val = dfn(attr, def);
|
-if (!attr)
- val = def;
-else
- val = fn(attr);
+val = dfn(attr, def);
|
-if (!attr)
- return def;
-return fn(attr);
+return dfn(attr, def);
|
-attr ? fn(attr) : def
+dfn(attr, def)
|
-!attr ? def : fn(attr)
+dfn(attr, def)
)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are quite a number of places that use patterns
such as
if (attr)
val = nla_get_u16(attr);
else
val = DEFAULT;
Add nla_get_u16_default() and friends like that to
not have to type this out all the time.
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241108114145.acd2aadb03ac.I3df6aac71d38a5baa1c0a03d0c7e82d4395c030e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is currently impossible to delete individual FDB entries (as opposed
to flushing) that were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
RTNETLINK answers: Invalid argument
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
This is in contrast to MDB entries that can be deleted after the VLAN
was deleted:
# bridge vlan add vid 10 dev dummy1
# bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge vlan del vid 10 dev dummy1
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
Error: bridge: MDB entry not found.
Align the two interfaces and allow user space to delete FDB entries that
were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
Error: Fdb entry not found.
Add a selftest to make sure this behavior does not regress:
# ./rtnetlink.sh -t kci_test_fdb_del
PASS: bridge fdb del
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241105133954.350479-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the mlx5_eq_comp_int() interrupt handler schedules a tasklet
to call mlx5_cq_tasklet_cb() if it processes any completions. For CQs
whose completions don't need to be processed in tasklet context, this
adds unnecessary overhead. In a heavy TCP workload, we see 4% of CPU
time spent on the tasklet_trylock() in tasklet_action_common(), with a
smaller amount spent on the atomic operations in tasklet_schedule(),
tasklet_clear_sched(), and locking the spinlock in mlx5_cq_tasklet_cb().
TCP completions are handled by mlx5e_completion_event(), which schedules
NAPI to poll the queue, so they don't need tasklet processing.
Schedule the tasklet in mlx5_add_cq_to_tasklet() instead to avoid this
overhead. mlx5_add_cq_to_tasklet() is responsible for enqueuing the CQs
to be processed in tasklet context, so it can schedule the tasklet. CQs
that need tasklet processing have their interrupt comp handler set to
mlx5_add_cq_to_tasklet(), so they will schedule the tasklet. CQs that
don't need tasklet processing won't schedule the tasklet. To avoid
scheduling the tasklet multiple times during the same interrupt, only
schedule the tasklet in mlx5_add_cq_to_tasklet() if the tasklet work
queue was empty before the new CQ was pushed to it.
The additional branch in mlx5_add_cq_to_tasklet(), called for each EQE,
may add a small cost for the userspace Infiniband CQs whose completions
are processed in tasklet context. But this seems worth it to avoid the
tasklet overhead for CQs that don't need it.
Note that the mlx4 driver works the same way: it schedules the tasklet
in mlx4_add_cq_to_tasklet() and only if the work queue was empty before.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/20241105204000.1807095-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gilad Naaman says:
====================
Improve neigh_flush_dev performance
This patchsets improves the performance of neigh_flush_dev.
Currently, the only way to implement it requires traversing
all neighbours known to the kernel, across all network-namespaces.
This means that some flows are slowed down as a function of neigh-scale,
even if the specific link they're handling has little to no neighbours.
In order to solve this, this patchset adds a netdev->neighbours list,
as well as making the original linked-list doubly-, so that it is
possible to unlink neighbours without traversing the hash-bucket to
obtain the previous neighbour.
The original use-case we encountered was mass-deletion of links (12K
VLANs) while there are 50K ARPs and 50K NDPs in the system; though the
slowdowns would also appear when the links are set down.
====================
Link: https://patch.msgid.link/20241107160444.2913124-1-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a mapping between a netdev and its neighoburs,
allowing for much cheaper flushes.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241107160444.2913124-7-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove all usage of the bare neighbour::next pointer,
replacing them with neighbour::hash and its for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-5-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert seq_file-related neighbour functionality to use neighbour::hash
and the related for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-4-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce neigh_for_each_in_bucket in neighbour.h, to help iterate over
the neighbour table more succinctly.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-3-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a doubly-linked node to neighbours, so that they
can be deleted without iterating the entire bucket they're in.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-2-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vendor drivers r8125/r8126 apply this additional magic setting when
enabling WAKE_PHY, so do the same here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/51130715-45be-4db5-abb7-05d87e1f5df9@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make use of new helper r8169_mod_reg8_cond() and move from a switch()
to an if() clause. Benefit is that we don't have to touch this piece of
code each time support for a new chip version is added.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/e1ccdb85-a4ed-4800-89c2-89770ff06452@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix spelling of "probability" in tc.yaml documentation. This corrects
the max-P field description in struct tc_sfq_qopt_v1.
Signed-off-by: Abhinav Saxena <xandfury@gmail.com>
Link: https://patch.msgid.link/20241108195642.139315-1-xandfury@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/Zys4hCj61V+mQfX2@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241105231855.235894-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable has already been assigned in the subflow_create_ctx(),
So we don't need to reassign this variable in the subflow_ulp_clone().
Signed-off-by: MoYuanhao <moyuanhao3676@163.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241106071035.2591-1-moyuanhao3676@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MCTP control protocol implementations are transport binding dependent.
Endpoint discovery is mandatory based on transport binding.
Message timing requirements are specified in each respective transport
binding specification.
However, we currently have no means to get this information from MCTP
links.
Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents
the transport type using the DMTF DSP0239-defined type numbers, returned
as part of RTM_GETLINK data.
We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for
example:
- 0x00 (unspec) for loopback interface;
- 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and
- 0x05 (serial) for mctpserial%d interfaces.
Signed-off-by: Khang Nguyen <khangng@os.amperecomputing.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add NETIF_F_GSO_ESP bit to bond's gso_partial_features if all slaves
support it, such that ESP segmentation is handled by hardware if possible.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241105192721.584822-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the "tos" parameter of ip_route_output() to dscp_t. This way
we'll have a dscp_t value directly available when .flowi4_tos will
eventually be converted to dscp_t.
All ip_route_output() callers but one set this "tos" parameter to 0 and
therefore don't need to be adapted to the new prototype.
Only br_nf_pre_routing_finish() needs conversion. It can just use
ip4h_dscp() to get the DSCP field from the IPv4 header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0f10d031dd44c70aae9bc6e19391cb30d5c2fe71.1730928699.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: remove genphy_config_eee_advert
This series removes genphy_config_eee_advert().
Note: The change to bcm_config_lre_aneg() is compile-tested only
as I don't have supported hardware.
====================
Link: https://patch.msgid.link/69d22b31-57d1-4b01-bfde-0c6a1df1e310@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bcm_config_lre_aneg() doesn't use genphy_config_eee_advert() any longer.
As this was the only user, we can remove genphy_config_eee_advert() now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/37da7f3e-b883-4c07-9881-b8c0516822b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bcm_config_lre_aneg() is the only user of genphy_config_eee_advert(),
therefore use genphy_c45_an_config_eee_aneg() instead. The resulting
functionality is equivalent, and bcm_config_lre_aneg() follows the
structure of __genphy_config_aneg().
In a follow-up step genphy_config_eee_advert() can be removed.
Note: We preserve the current behavior to ignore errors.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/6e5cd4ab-28bb-4d82-b449-fec85f3d1e8a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We'll use this function in bcm_config_lre_aneg(), therefore export it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/02bd7c39-7413-4433-bafc-a276089bd292@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genphy_c45_write_eee_adv() isn't used outside phy-c45.c,
so make it static.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/d23bd784-44e6-4a15-af3a-b37379156521@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Things are slowing down quite a bit, mostly driver fixes here.
No known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed
in a refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration
when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iWv1
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.
To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.
Fixes: 0de38d9f1d ("ionic: extract common bits from ionic_probe")
Signed-off-by: Wentao Liang <Wentao_liang_g@163.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SMC-R variant of the SMC protocol used direct call to function
ib_device_ops.get_netdev() to lookup netdev. As we used mlx5 device
driver to run SMC-R, it failed to find a device, because in mlx5_ib the
internal net device management for retrieving net devices was replaced
by a common interface ib_device_get_netdev() in commit 8d159eb211
("RDMA/mlx5: Use IB set_netdev and get_netdev functions").
Since such direct accesses to the internal net device management is not
recommended at all, update the SMC-R code to use proper API
ib_device_get_netdev().
Fixes: 54903572c2 ("net/smc: allow pnetid-less configuration")
Reported-by: Aswin K <aswin@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://patch.msgid.link/20241106082612.57803-1-wenjia@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Erik Schumacher found and fixed a problem in the calculation of the PWM
period setting yielding too long periods. Trevor Gamblin---who already
cared about mainlining the pwm-axi-pwmgen driver---stepped forward as an
additional reviewer.
Thanks to Erik and Trevor.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmcsghcACgkQj4D7WH0S
/k5+rwf9EQq0tGE7yoXdCz1s/YEwp3XadWW9jYAUiRip4bxxzSZeav435RdyVy6O
aSUifvm2MrlEjSMmRSGoOBnwSRHA6XwEeZKB4jh2CLaWklLwqOdCYA5Cyabup2Zn
Z0Kzs3jAaw/y4v6gB9sCO5bj47KY6px1XGn8dqMHrVDJvfTWz9PMUOPFyaCtR9Ov
Y9DVD2XTIZ2v6z0WHMLiMrYAqBgGxsqZTZTUs+cVBnGDDyKjD8SZNdk9vrxGoerw
yoQ8iljNLPPmz3iKELJh5IJhY5Nj5hVlzhFm7QSAlhIOFzxtCaDpwMyRUNEeYVjt
0+HumDC5X6MUBwgdFB55Ra3Nw+H3dg==
=QzWj
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix period setting in imx-tpm driver and a maintainer update
Erik Schumacher found and fixed a problem in the calculation of the
PWM period setting yielding too long periods. Trevor Gamblin - who
already cared about mainlining the pwm-axi-pwmgen driver - stepped
forward as an additional reviewer.
Thanks to Erik and Trevor"
* tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: add self as reviewer for AXI PWM GENERATOR
pwm: imx-tpm: Use correct MODULO value for EPWM mode
seq_printf is costy, on a system with n CPUs, reading /proc/softirqs
would yield 10*n decimal values, and the extra cost parsing format string
grows linearly with number of cpus. Replace seq_printf with
seq_put_decimal_ull_width have significant performance improvement.
On an 8CPUs system, reading /proc/softirqs show ~40% performance
gain with this patch.
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=0P8E
-----END PGP SIGNATURE-----
Merge tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following series contains a Netfilter fix:
1) Wait for rcu grace period after netdevice removal is reported via event.
* tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: wait for rcu grace period on net_device removal
====================
Link: https://patch.msgid.link/20241107113212.116634-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid modifying or enqueuing new events if it's possible to tell that no
one will consume them.
Since enqueueing requires searching the current queue for opposite
events for the same address, adding addresses en-masse turns this
inetaddr_event into a bottle-neck, as it will get slower and slower
with each address added.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20241104083545.114-1-gnaaman@drivenets.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andy Yan says:
====================
Fix the arc emac driver
The arc emac driver was broken for a long time,
The first broken happens when a dma releated fix introduced in Linux 5.10.
The second broken happens when a emac device tree node restyle introduced
in Linux 6.1.
These two patches are try to make the arc emac work again.
Changes in v2:
- Add cover letter.
- Add fix tag.
- Add more detail explaination.
====================
Link: https://patch.msgid.link/20241104130147.440125-1-andyshrk@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The binding emac_rockchip.txt is converted to YAML.
Changed against the original binding is an added MDIO subnode.
This make the driver failed to find the PHY, and given the 'mdio
has invalid PHY address' it is probably looking in the wrong node.
Fix emac_mdio.c so that it can handle both old and new
device trees.
Fixes: 1dabb74971 ("ARM: dts: rockchip: restyle emac nodes")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Tested-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ndev->dev and pdev->dev aren't the same device, use ndev->dev.parent
which has dma_mask, ndev->dev.parent is just pdev->dev.
Or it would cause the following issue:
[ 39.933526] ------------[ cut here ]------------
[ 39.938414] WARNING: CPU: 1 PID: 501 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x90/0x1f8
Fixes: f959dcd6dd ("dma-direct: Fix potential NULL pointer dereference")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jinjian Song says:
====================
net: wwan: t7xx: Add t7xx debug ports
Add support for t7xx WWAN device to debug by ADB (Android Debug Bridge)
port and MTK MIPCi (Modem Information Process Center) port.
Application can use ADB (Android Debug Bridge) port to implement
functions (shell, pull, push ...) by ADB protocol commands.
Application can use MIPC (Modem Information Process Center) port
to debug antenna tuner or noise profiling through this MTK modem
diagnostic interface.
====================
Link: https://patch.msgid.link/20241104094436.466861-1-jinjian.song@fibocom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
