The y2038 issue for ppdev is changes of timeval in the ioctl
(PPSETTIME and PPGETTIME). The size of struct timeval changes from
8bytes to 16bytes due to the changes of time_t. It lead to the
changes of the command of ioctl, e.g. for PPGETTIME, We have:
on 32-bit (old): 0x80087095
on 32-bit (new): 0x80107095
on 64-bit : 0x80107095
This patch define these two ioctl commands to support the 32bit
and 64bit time_t application at the same time. And, introduce
pp_set_timeout to remove some duplicated code.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify a few of the *generic* shared dev_warn() and dev_dbg()
print messages for three reasons:
0) Historically firmware_class code was added to help
get device driver firmware binaries but these days
request_firmware*() helpers are being repurposed for
general *system data* needed by the kernel.
1) This will also help generalize shared code as much as possible
later in the future in consideration for a new extensible firmware
API which will enable to separate usermode helper code out as much
as possible.
2) Kees Cook pointed out the the prints already have the device
associated as dev_*() helpers are used, that should help identify
the user and case in which the helpers are used. That should provide
enough context and simplifies the messages further.
v4: generalize debug/warn messages even further as suggested by
Kees Cook.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Vojtěch Pavlík <vojtech@suse.cz>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some array of const char are not set as const.
This patch fix that.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for more than 128 peripherals by taking a lazy
caching approach to the mapping tables. Instead of reading and
caching the tables at boot given some fixed size, read them and
cache them on an as needed basis. We still assume a max size of
512 peripherals, trading off some space for simplicity.
Based on a patch by Gilad Avidov <gavidov@codeaurora.org> and
Sagar Dharia <sdharia@codeaurora.org>.
Cc: Gilad Avidov <gavidov@codeaurora.org>
Cc: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hdq_usecount was set to zero after a successful read, so
omap_hdq_put could not properly free resources which leads
e.g. to increasing usecounts in lsmod output
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Reviewed-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) Make the include file to sort from order
2) clean up the driver to make more readability
Let's clean up such trivial details.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this pacthset try to fix the code style for sunxi.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmem providers have restrictions on register strides, so return error
when users attempt to read/write buffers with sizes which are less
than word size.
Without this patch the userspace would continue to try as it does not
get any error from the nvmem core, resulting in a hang or endless loop
in userspace.
Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for NXP LPC18xx EEPROM memory found in NXP
LPC185x/3x and LPC435x/3x/2x/1x devices.
EEPROM size is 16384 bytes and it can be entirely read and
written/erased with 1 word (4 bytes) granularity. The last page
(128 bytes) contains the EEPROM initialization data and is not writable.
Erase/program time is less than 3ms. The EEPROM device requires a
~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing
the system bus clock by the division factor, contained in the divider
register (minus 1 encoded).
EEPROM will be kept in Power Down mode except during read/write calls.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use to_i2c_client() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 985087dbcb 'misc: add support for bmp18x chips to the bmp085
driver' changed the BMP085 config symbol to a boolean. I see no
reason why the shared code cannot be built as a module, so change it
back to tristate.
Fixes: 985087dbcb ("misc: add support for bmp18x chips to the bmp085 driver")
Cc: Eric Andersson <eric.andersson@unixphere.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig currently controlling compilation of this code is:
drivers/misc/Kconfig:config ARM_CHARLCD
drivers/misc/Kconfig: bool "ARM Ltd. Character LCD Driver"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and this driver did not have a ".remove"
function coded for non-modular drivers either.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
We don't replace module.h with init.h since the file already has that.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow the pch_phub driver to be build on MIPS platforms, in preparation
for its use on the MIPS Boston board.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pr_debug() will never be executed.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of calling release_firmware() on every error and then jumping
lets have a common release_firmware() in the error path.
This patch also fixes a memory leak where we missed release_firmware()
if mic_x100_load_command_line() fails.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of jumping to a label and then returning from there lets return
directly.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If request_firmware() succeeds then rc becomes 0. After that if the test
for strcmp() fails then we were jumping to label done: and returning rc.
But rc being 0 we returned success whereas we have failed here and we
were supposed to return an error.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From the error path we are printing an error message with dev_err(). No
need to print almost same message with dev_dbg().
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the loop we test "if (!retry)" to see if we timedout. The problem
is "retry--" is a post-op so retry will be -1 at the end of the loop. I
have fixed this by changing it to a pre-op instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following crash seen when MIC reset is invoked in
RESET_FAILED state due to device_del being called a second time on an
already deleted device:
[<ffffffff813b2295>] device_del+0x45/0x1d0
[<ffffffff813b243e>] device_unregister+0x1e/0x60
[<ffffffffa040f1c2>] scif_unregister_device+0x12/0x20 [scif_bus]
[<ffffffffa042f75a>] cosm_stop+0xaa/0xe0 [mic_cosm]
[<ffffffffa042f844>] cosm_reset_trigger_work+0x14/0x20 [mic_cosm]
The fix consists in realizing that because cosm_reset changes the
state to MIC_RESETTING, cosm_stop needs the previous state, before it
changed to MIC_RESETTING, to decide whether a hw_ops->stop had
previously been issued. This is now provided in a new cosm_device
member cdev->prev_state.
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Broxton SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Apollo Lake SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the character device write method allocates a temporary buffer
for user's data, but the user's data size is not sanitized and can cause
arbitrarily large allocations via kzalloc() or an integer overflow that
will then result in overwriting kernel memory.
This patch trims the input buffer size to avoid these issues.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since both sw_start and sw_end are master indices, the size of array
that holds them is sw_end - sw_start + 1, which the current code gets
wrong, allocating one item less than required.
This patch corrects the allocation size, avoiding potential slab
corruption.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
[alexander.shishkin@linux.intel.com: re-wrote the commit message]
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the list of stm_sources linked to an stm device is protected by
a spinlock, which also means that sources' .unlink() method is called under
this spinlock. However, this method may (and does) sleep, which means
trouble.
This patch slightly reworks locking around stm::link_list so that bits that
might_sleep() are called with a mutex held instead. Modification of this
list requires both mutex and spinlock to be held, while looking at the list
can be done under either mutex or spinlock.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, if stm device removal has to unbind from a policy (that is,
an stm device that has STP policy, gets removed), it will trigger a
nested lock on the stm device's policy mutex.
This patch fixes the problem by moving the locking from the policy
unbinding to policy removal (configfs path), where it's actually needed;
the other caller of the policy unbinding function already takes the
mutex around the call.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The newly added STM code uses SRCU, but does not ensure that
this code is part of the kernel:
drivers/built-in.o: In function `stm_source_link_show':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `stm_source_link_drop':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'
This adds a Kconfig 'select' statement like all the other SRCU using
drivers have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7bd1d4093c ("stm class: Introduce an abstraction for System Trace Module devices")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If STM=n, it doesn't make sense to ask about STM_DUMMY and
STM_SOURCE_CONSOLE support, which are not even built when enabled
anyway. Hence hide these options if STM=n.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Other than plainly parsing the device tree there is no way to
know which CPU a tracer is affined to. As such adding an
interface to lookup the CPU field enclosed in the etm_drvdata
structure that was initialised at boot time.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The coresight drivers have absolutely no control over bind and unbind
operations triggered from sysfs. The operations simply can't be
cancelled or denied event when one or several tracing sessions are
under way. Since the memory associated to individual device is
invariably freed, the end result is a kernel crash when the path from
source to sink is travelled again as demonstrated here[1].
One solution could be to keep track of all the path (i.e tracing
session) that get created and iterate through the elements of those path
looking for the coresight device that is being removed. This proposition
doesn't scale well since there is no upper bound on the amount of
concurrent trace session that can be created.
With the above in mind, this patch prevent devices from being unbounded
from their driver by using the driver->suppress_bind_attr option. That way
trace sessions can be managed without fearing to loose devices.
Since device can't be removed anymore the xyz_remove() functions found in
each driver is also removed.
[1]. http://www.spinics.net/lists/arm-kernel/msg474952.html
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function 'coresight_unregister()', all references to the csdev that
is being taken away need to be removed from the topology. Otherwise
building the next coresight path from source to sink may use memory
that has been released.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reference count taken by function bus_find_device() needs
to be released if a child device is found, something this patch
is adding.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In its current form the code never frees csdev->refcnt allocated
in coresight_register(). There is also a problem with csdev->conns
that is freed before device_unregister() rather than in the device
release function.
This patch addresses both issues by moving kfree(csdev->conns) to
coresight_device_release() and freeing csdev->refcnt, also in
the same function.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change restricts the reading and setting of the head and tail
pointers on 32bit X86 to 32bit for both correctness and
performance reasons. On uniprocessor X86_32, the atomic64_read
may be implemented as a non-locked cmpxchg8b. This may result in
updates to the pointers done by the VMCI device being overwritten.
On MP systems, there is no such correctness issue, but using 32bit
atomics avoids the overhead of the locked 64bit operation. All this
is safe because the queue size on 32bit systems will never exceed
a 32bit value.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the channel send side, many of the VMBUS
device drivers explicity serialize access to the
outgoing ring buffer. Give more control to the
VMBUS device drivers in terms how to serialize
accesss to the outgoing ring buffer.
The default behavior will be to aquire the
ring lock to preserve the current behavior.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
