Most bio operations get basic sanity checking in submit_bio and anything
more complicated than that is done in the callers. Discards are a bit
different from that in that a lot of checking is done in
__blkdev_issue_discard, and the specific errnos for that are returned
to userspace. Move the checks that require specific errnos to the ioctl
handler instead, and just leave the basic sanity checking in submit_bio
for the other handlers. This introduces two changes in behavior:
1) the logical block size alignment check of the start and len is lost
for non-ioctl callers.
This matches what is done for other operations including reads and
writes. We should probably verify this for all bios, but for now
make discards match the normal flow.
2) for non-ioctl callers all errors are reported on I/O completion now
instead of synchronously. Callers in general mostly ignore or log
errors so this will actually simplify the code once cleaned up
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240506042027.2289826-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We now set a default granularity in the queue limits API, so don't
bother with this extra check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240506042027.2289826-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For devices with virt_boundary limit, the driver may provide zero max
segment size, we have to set it as UINT_MAX at default. Otherwise, it
may cause warning in driver when handling sglist.
Fix it by setting default max segment size as UINT_MAX.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@kernel.org>
Fixes: b561ea56a2 ("block: allow device to have both virt_boundary_mask and max segment size")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/linux-block/7e38b67c-9372-a42d-41eb-abdce33d3372@linux-m68k.org/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240424134722.2584284-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the cmdline parsing of the "blkdevparts=" parameter using strsep(),
which makes the code simpler.
Before commit 146afeb235 ("block: use strscpy() to instead of
strncpy()"), we used a strncpy() to copy a block device name and partition
names. The commit simply replaced a strncpy() and NULL termination with
a strscpy(). It did not update calculations of length passed to strscpy().
While the length passed to strncpy() is just a length of valid characters
without NULL termination ('\0'), strscpy() takes it as a length of the
destination buffer, including a NULL termination.
Since the source buffer is not necessarily NULL terminated, the current
code copies "length - 1" characters and puts a NULL character in the
destination buffer. It replaces the last character with NULL and breaks
the parsing.
As an example, that buffer will be passed to parse_parts() and breaks
parsing sub-partitions due to the missing ')' at the end, like the
following.
example (Check Point V-80 & OpenWrt):
- Linux Kernel 6.6
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 crashkernel=30M mvpp2x.queue_mode=1 blkdevparts=mmcblk1:48M@10M(kernel-1),1M(dtb-1),720M(rootfs-1),48M(kernel-2),1M(dtb-2),720M(rootfs-2),300M(default_sw),650M(logs),1M(preset_cfg),1M(adsl),-(storage) maxcpus=4
...
[ 0.884016] mmc1: new HS200 MMC card at address 0001
[ 0.889951] mmcblk1: mmc1:0001 004GA0 3.69 GiB
[ 0.895043] cmdline partition format is invalid.
[ 0.895704] mmcblk1: p1
[ 0.903447] mmcblk1boot0: mmc1:0001 004GA0 2.00 MiB
[ 0.908667] mmcblk1boot1: mmc1:0001 004GA0 2.00 MiB
[ 0.913765] mmcblk1rpmb: mmc1:0001 004GA0 512 KiB, chardev (248:0)
1. "48M@10M(kernel-1),..." is passed to strscpy() with length=17
from parse_parts()
2. strscpy() returns -E2BIG and the destination buffer has
"48M@10M(kernel-1\0"
3. "48M@10M(kernel-1\0" is passed to parse_subpart()
4. parse_subpart() fails to find ')' when parsing a partition name,
and returns error
- Linux Kernel 6.1
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 crashkernel=30M mvpp2x.queue_mode=1 blkdevparts=mmcblk1:48M@10M(kernel-1),1M(dtb-1),720M(rootfs-1),48M(kernel-2),1M(dtb-2),720M(rootfs-2),300M(default_sw),650M(logs),1M(preset_cfg),1M(adsl),-(storage) maxcpus=4
...
[ 0.953142] mmc1: new HS200 MMC card at address 0001
[ 0.959114] mmcblk1: mmc1:0001 004GA0 3.69 GiB
[ 0.964259] mmcblk1: p1(kernel-1) p2(dtb-1) p3(rootfs-1) p4(kernel-2) p5(dtb-2) 6(rootfs-2) p7(default_sw) p8(logs) p9(preset_cfg) p10(adsl) p11(storage)
[ 0.979174] mmcblk1boot0: mmc1:0001 004GA0 2.00 MiB
[ 0.984674] mmcblk1boot1: mmc1:0001 004GA0 2.00 MiB
[ 0.989926] mmcblk1rpmb: mmc1:0001 004GA0 512 KiB, chardev (248:0
By the way, strscpy() takes a length of destination buffer and it is
often confusing when copying characters with a specified length. Using
strsep() helps to separate the string by the specified character. Then,
we can use strscpy() naturally with the size of the destination buffer.
Separating the string on the fly is also useful to omit the redundant
string copy, reducing memory usage and improve the code readability.
Fixes: 146afeb235 ("block: use strscpy() to instead of strncpy()")
Suggested-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240421074005.565-1-musashino.open@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check if partition scanning is enabled instead of
open coding the check in a few places. This now always checks for
the hidden flag even if all but one of the callers are never reachable
for hidden gendisks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240502130033.1958492-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here we know that bdevfs inodes are coallocated with struct block_device
and we can get to ->bd_inode value without any dereferencing. Introduce
an inlined helper (static, *not* exported, purely internal for bdev.c)
that gets an associated inode by block_device - BD_INODE(bdev).
NOTE: leave it static; nobody outside of block/bdev.c has any business
playing with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
bdev_unhash(): make block device invisible to lookups by device number
bdev_drop(): drop reference to associated inode.
Both are internal, for use by genhd and partition-related code - similar
to bdev_add(). The logics in there (especially the lifetime-related
parts of it) ought to be cleaned up, but that's a separate story; here
we just encapsulate getting to associated inode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
disk_live() and block_size() access bd_inode directly, prepare to remove
the field bd_inode from block_device, and only access bd_inode in block
layer.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-8-viro@zeniv.linux.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
In bdev_alloc() we have all flags initialized to false, so
assignment to ->bh_has_submit_bio n there is a no-op unless
we have partno != 0 and flag already set on entire device.
In device_add_disk() we have just allocated the block_device
in question and it had been a full-device one, so the flag
is guaranteed to be still clear when we get to assignment.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replace bd_partno with a 32bit field (__bd_flags). The lower 8 bits
contain the partition number, the upper 24 are for flags.
Helpers: bdev_{test,set,clear}_flag(bdev, flag), with atomic_or()
and atomic_andnot() used to set/clear.
NOTE: this commit does not actually move any flags over there - they
are still bool fields. As the result, it shifts the fields wrt
cacheline boundaries; that's going to be restored once the first
3 flags are dealt with.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Define the code for checking conventional and sequential write required
zones suing the functions blk_revalidate_conv_zone() and
blk_revalidate_seq_zone() respectively. This simplifies the zone type
switch-case in blk_revalidate_zone_cb().
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240501110907.96950-15-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When BIOs plugged in a zone write plug are aborted,
blk_zone_wplug_bio_io_error() clears the BIO BIO_ZONE_WRITE_PLUGGING
flag so that bio_io_error(bio) does not end up calling
blk_zone_write_plug_bio_endio() and we thus need to manually drop the
reference on the zone write plug held by the aborted BIO.
Move the call to disk_put_zone_wplug() that is alwasy following the call
to blk_zone_wplug_bio_io_error() inside that function to simplify the
code.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-14-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already have the disk variable obtained from the bio when calling
disk_get_zone_wplug(). So use that variable instead of dereferencing the
bio bdev again for the disk argument of disk_get_zone_wplug().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-13-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_zone_complete_request() must be called to handle the completion of a
zone write request handled with zone write plugging. This function is
called from blk_complete_request(), blk_update_request() and also in
blk_mq_submit_bio() error path. Improve this by moving this function
call into blk_mq_finish_request() as all requests are processed with
this function when they complete as well as when they are freed without
being executed. This also improves blk_update_request() used by scsi
devices as these may repeatedly call this function to handle partial
completions.
To be consistent with this change, blk_zone_complete_request() is
renamed to blk_zone_finish_request() and
blk_zone_write_plug_complete_request() is renamed to
blk_zone_write_plug_finish_request().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-12-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve blk_zone_write_plug_bio_merged() to check that we succefully get
a reference on the zone write plug of the merged BIO, as expected since
for a merge we already have at least one request and one BIO referencing
the zone write plug. Comments in this function are also improved to
better explain the references to the BIO zone write plug.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-11-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zone write plugging ignores empty (no data) flush operations but handles
flush BIOs that have data to ensure that the flush machinery generated
write is processed in order. However, the call to
blk_zone_write_plug_attempt_merge() which sets a request
RQF_ZONE_WRITE_PLUGGING flag is called after blk_insert_flush(), thus
missing indicating that a non empty flush request completion needs
handling by zone write plugging.
Fix this by moving the call to blk_zone_write_plug_attempt_merge()
before blk_insert_flush(). And while at it, rename that function as
blk_zone_write_plug_init_request() to be clear that it is not just about
merging plugged BIOs in the request. While at it, also add a WARN_ONCE()
check that the zone write plug for the request is not NULL.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-10-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure that a request bio is not NULL before trying to restore the
request start sector.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 6f8fd758de ("block: Restore sector of flush requests")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-9-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Large write BIOs that span a zone boundary are split in
blk_mq_submit_bio() before being passed to blk_zone_plug_bio() for zone
write plugging. Such split BIO will be chained with one fragment
targeting one zone and the remainder of the BIO targeting the next
zone. The two BIOs can be executed in parallel, without a predetermine
order relative to eachother and their completion may be reversed: the
remainder first completing and the first fragment then completing. In
such case, bio_endio() will not immediately execute
blk_zone_write_plug_bio_endio() for the parent BIO (the remainder of the
split BIO) as the BIOs are chained. blk_zone_write_plug_bio_endio() for
the parent BIO will be executed only once the first fragment completes.
In the case of a device with small zones and very large BIOs, uch
completion pattern can lead to disk_should_remove_zone_wplug() to return
true for the zone of the parent BIO when the parent BIO request
completes and blk_zone_write_plug_complete_request() is executed. This
triggers the removal of the zone write plug from the hash table using
disk_remove_zone_wplug(). With the zone write plug of the parent BIO
missing, the call to disk_get_zone_wplug() in
blk_zone_write_plug_bio_endio() returns NULL and triggers a warning.
This patterns can be recreated fairly easily using a scsi_debug device
with small zone and btrfs. E.g.
modprobe scsi_debug delay=0 dev_size_mb=1024 sector_size=4096 \
zbc=host-managed zone_cap_mb=3 zone_nr_conv=0 zone_size_mb=4
mkfs.btrfs -f -O zoned /dev/sda
mount -t btrfs /dev/sda /mnt
fio --name=wrtest --rw=randwrite --direct=1 --ioengine=libaio \
--bs=4k --iodepth=16 --size=1M --directory=/mnt --time_based \
--runtime=10
umount /dev/sda
Will result in the warning:
[ 29.035538] WARNING: CPU: 3 PID: 37 at block/blk-zoned.c:1207 blk_zone_write_plug_bio_endio+0xee/0x1e0
...
[ 29.058682] Call Trace:
[ 29.059095] <TASK>
[ 29.059473] ? __warn+0x80/0x120
[ 29.059983] ? blk_zone_write_plug_bio_endio+0xee/0x1e0
[ 29.060728] ? report_bug+0x160/0x190
[ 29.061283] ? handle_bug+0x36/0x70
[ 29.061830] ? exc_invalid_op+0x17/0x60
[ 29.062399] ? asm_exc_invalid_op+0x1a/0x20
[ 29.063025] ? blk_zone_write_plug_bio_endio+0xee/0x1e0
[ 29.063760] bio_endio+0xb7/0x150
[ 29.064280] btrfs_clone_write_end_io+0x2b/0x60 [btrfs]
[ 29.065049] blk_update_request+0x17c/0x500
[ 29.065666] scsi_end_request+0x27/0x1a0 [scsi_mod]
[ 29.066356] scsi_io_completion+0x5b/0x690 [scsi_mod]
[ 29.067077] blk_complete_reqs+0x3a/0x50
[ 29.067692] __do_softirq+0xcf/0x2b3
[ 29.068248] ? sort_range+0x20/0x20
[ 29.068791] run_ksoftirqd+0x1c/0x30
[ 29.069339] smpboot_thread_fn+0xcc/0x1b0
[ 29.069936] kthread+0xcf/0x100
[ 29.070438] ? kthread_complete_and_exit+0x20/0x20
[ 29.071314] ret_from_fork+0x31/0x50
[ 29.071873] ? kthread_complete_and_exit+0x20/0x20
[ 29.072563] ret_from_fork_asm+0x11/0x20
[ 29.073146] </TASK>
either when fio executes or when unmount is executed.
Fix this by modifying disk_should_remove_zone_wplug() to check that the
reference count to a zone write plug is not larger than 2, that is, that
the only references left on the zone are the caller held reference
(blk_zone_write_plug_complete_request()) and the initial extra reference
for the zone write plug taken when it was initialized (and that is
dropped when the zone write plug is removed from the hash table).
To be consistent with this change, make sure to drop the request or BIO
held reference to the zone write plug before calling
disk_zone_wplug_unplug_bio(). All references are also dropped using
disk_put_zone_wplug() instead of atomic_dec() to ensure that the zone
write plug is freed if it needs to be.
Comments are also improved to clarify zone write plugs reference
handling.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240501110907.96950-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix disk_remove_zone_wplug() to ensure that a zone write plug already
removed from a disk hash table of zone write plugs is not removed
again. Do this by checking the BLK_ZONE_WPLUG_UNHASHED flag of the plug
and calling hlist_del_init_rcu() only if the flag is not set.
Furthermore, since BIO completions can happen at any time, that is,
decrementing of the zone write plug reference count can happen at any
time, make sure to use disk_put_zone_wplug() instead of atomic_dec() to
ensure that the zone write plug is freed when its last reference is
dropped. In order to do this, disk_remove_zone_wplug() is moved after
the definition of disk_put_zone_wplug(). disk_should_remove_zone_wplug()
is moved as well to keep it together with disk_remove_zone_wplug().
To be consistent with this change, add a check in disk_put_zone_wplug()
to ensure that a zone write plug being freed was already removed from
the disk hash table.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-7-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since a zone write plug BIO work is a field of struct blk_zone_wplug, we
must ensure that a zone write plug is never freed when its BIO
submission work is queued or running. Do this by holding a reference on
the zone write plug when the submission work is scheduled for execution
with queue_work() and releasing the reference at the end of the
execution of the work function blk_zone_wplug_bio_work().
The helper function disk_zone_wplug_schedule_bio_work() is introduced to
get a reference on a zone write plug and queue its work. This helper is
used in disk_zone_wplug_unplug_bio() and disk_zone_wplug_handle_error().
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When zone is reset or finished, disk_zone_wplug_set_wp_offset() is
called to update the zone write plug write pointer offset and to clear
the zone error state (BLK_ZONE_WPLUG_ERROR flag) if it is set.
However, this processing is missing dropping the reference to the zone
write plug that was taken in disk_zone_wplug_set_error() when the error
flag was first set. Furthermore, the error state handling must release
the zone write plug lock to first execute a report zones command. When
the report zone races with a reset or finish operation that clears the
error, we can end up decrementing the zone write plug reference count
twice: once in disk_zone_wplug_set_wp_offset() for the reset/finish
operation and one more time in disk_zone_wplugs_work() once
disk_zone_wplug_handle_error() completes.
Fix this by introducing disk_zone_wplug_clear_error() as the symmetric
function of disk_zone_wplug_set_error(). disk_zone_wplug_clear_error()
decrements the zone write plug reference count obtained in
disk_zone_wplug_set_error() only if the error handling has not started
yet, that is, only if disk_zone_wplugs_work() has not yet taken the zone
write plug off the error list. This ensure that either
disk_zone_wplug_clear_error() or disk_zone_wplugs_work() drop the zone
write plug reference count.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When revalidating the zones of a zoned block device,
blk_revalidate_zone_cb() must allocate a zone write plug for any
sequential write required zone that is not empty nor full. However, the
current code tests the latter case by comparing the zone write pointer
offset to the zone size instead of the zone capacity. Furthermore,
disk_get_and_lock_zone_wplug() is called with a sector argument equal to
the zone start instead of the current zone write pointer position.
This commit fixes both issues by calling disk_get_and_lock_zone_wplug()
for a zone that is not empty and with a write pointer offset lower than
the zone capacity and use the zone capacity sector as the sector
argument for disk_get_and_lock_zone_wplug().
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For a device that has no limits for the maximum number of open and
active zones, we default to using the number of zones, limited to
BLK_ZONE_WPLUG_DEFAULT_POOL_SIZE (128), for the maximum number of open
zones indicated to the user. However, for a device that has conventional
zones and less zones than BLK_ZONE_WPLUG_DEFAULT_POOL_SIZE, we should
not account conventional zones and set the limit to the number of
sequential write required zones. Furthermore, for cases where the limit
is equal to the number of sequential write required zones, we can
advertize a limit of 0 to indicate "no limits".
Fix this by moving the zone write plug mempool resizing from
disk_revalidate_zone_resources() to disk_update_zone_resources() where
we can safely compute the number of conventional zones and update the
limits.
Fixes: 843283e96e ("block: Fake max open zones limit when there is no limit")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZiulnAAKCRCRxhvAZXjc
ogO+AP9z3+WAvgGmJkWOjT1aOrcQWVe+ZEdEUdK26ufkHhM5vAD/RXmdUBVHcYWk
3oE1hG8bONOASUc6dUIATPHBDjvqFg8=
=LtmL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a few small fixes for this merge window and the attempt
to handle the ntfs removal regression that was reported a little while
ago:
- After the removal of the legacy ntfs driver we received reports
about regressions for some people that do mount "ntfs" explicitly
and expect the driver to be available. Since ntfs3 is a drop-in for
legacy ntfs we alias legacy ntfs to ntfs3 just like ext3 is aliased
to ext4.
We also enforce legacy ntfs is always mounted read-only and give it
custom file operations to ensure that ioctl()'s can't be abused to
perform write operations.
- Fix an unbalanced module_get() in bdev_open().
- Two smaller fixes for the netfs work done earlier in this cycle.
- Fix the errno returned from the new FS_IOC_GETUUID and
FS_IOC_GETFSSYSFSPATH ioctls. Both commands just pull information
out of the superblock so there's no need to call into the actual
ioctl handlers.
So instead of returning ENOIOCTLCMD to indicate to fallback we just
return ENOTTY directly avoiding that indirection"
* tag 'vfs-6.9-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the pre-flush when appending to a file in writethrough mode
netfs: Fix writethrough-mode error handling
ntfs3: add legacy ntfs file operations
ntfs3: enforce read-only when used as legacy ntfs driver
ntfs3: serve as alias for the legacy ntfs driver
block: fix module reference leakage from bdev_open_by_dev error path
fs: Return ENOTTY directly if FS_IOC_GETUUID or FS_IOC_GETFSSYSFSPATH fail
The strncpy() here can cause a non-terminated string, which older gcc
versions such as gcc-9 warn about:
In function 'ldm_parse_tocblock',
inlined from 'ldm_validate_tocblocks' at block/partitions/ldm.c:386:7,
inlined from 'ldm_partition' at block/partitions/ldm.c:1457:7:
block/partitions/ldm.c:134:2: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
134 | strncpy (toc->bitmap1_name, data + 0x24, sizeof (toc->bitmap1_name));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
block/partitions/ldm.c:145:2: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
145 | strncpy (toc->bitmap2_name, data + 0x46, sizeof (toc->bitmap2_name));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
New versions notice that the code is correct after all because of the
following termination, but replacing the strncpy() with strscpy_pad()
or strcpy() avoids the warning and simplifies the code at the same time.
Use the padding version here to keep the existing behavior, in case
the code relies on not including uninitialized data.
Link: https://lkml.kernel.org/r/20240409140059.3806717-4-arnd@kernel.org
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Len Brown <lenb@kernel.org>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Changhui reported a kernel crash when running this simple shell
reproducer:
# cd /sys/kernel/debug/block && find . -type f -exec grep -aH . {} \;
The above results in a NULL pointer dereference if a device does not have
a zone_wplugs_hash allocated.
To fix this, return early if we don't have a zone_wplugs_hash.
Reported-by: Changhui Zhong <czhong@redhat.com>
Fixes: a98b05b02f ("block: Replace zone_wlock debugfs entry with zone_wplugs entry")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/e5fec079dfca448cc21c425cfa5d7b291f5faa67.1714046443.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A zone write plug BIO work function blk_zone_wplug_bio_work() calls
submit_bio_noacct_nocheck() to execute the next unplugged BIO. This
function may block. So executing zone plugs BIO works using the block
layer global kblockd workqueue can potentially lead to preformance or
latency issues as the number of concurrent work for a workqueue is
limited to WQ_DFL_ACTIVE (256).
1) For a system with a large number of zoned disks, issuing write
requests to otherwise unused zones may be delayed wiating for a work
thread to become available.
2) Requeue operations which use kblockd but are independent of zone
write plugging may alsoi end up being delayed.
To avoid these potential performance issues, create a workqueue per
zoned device to execute zone plugs BIO work. The workqueue max active
parameter is set to the maximum number of zone write plugs allocated
with the zone write plug mempool. This limit is equal to the maximum
number of open zones of the disk and defaults to 128 for disks that do
not have a limit on the number of open zones.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240420075811.1276893-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=EMuq
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240420' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just two minor fixes that should go into the 6.9 kernel release, one
fixing a regression with partition scanning errors, and one fixing a
WARN_ON() that can get triggered if we race with a timer"
* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
blk-iocost: do not WARN if iocg was already offlined
block: propagate partition scanning errors to the BLKRRPART ioctl
These functions are defined in the mq-deadline.c file, but not called
elsewhere, so delete these unused functions.
block/mq-deadline.c:134:1: warning: unused function 'deadline_earlier_request'.
block/mq-deadline.c:148:1: warning: unused function 'deadline_latter_request'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8803
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240419025610.34298-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which
is intended to confirm iocg is active when it has debt. However, warn
can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn()
is run at that time:
WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190
Call trace:
iocg_pay_debt+0x14c/0x190
iocg_kick_waitq+0x438/0x4c0
iocg_waitq_timer_fn+0xd8/0x130
__run_hrtimer+0x144/0x45c
__hrtimer_run_queues+0x16c/0x244
hrtimer_interrupt+0x2cc/0x7b0
The warn in this situation is meaningless. Since this iocg is being
removed, the state of the 'active_list' is irrelevant, and 'waitq_timer'
is canceled after removing 'active_list' in ioc_pd_free(), which ensures
iocg is freed after iocg_waitq_timer_fn() returns.
Therefore, add the check if iocg was already offlined to avoid warn
when removing a blkcg or disk.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240419093257.3004211-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 4601b4b130 ("block: reopen the device in blkdev_reread_part")
lost the propagation of I/O errors from the low-level read of the
partition table to the user space caller of the BLKRRPART.
Apparently some user space relies on, so restore the propagation. This
isn't exactly pretty as other block device open calls explicitly do not
are about these errors, so add a new BLK_OPEN_STRICT_SCAN to opt into
the error propagation.
Fixes: 4601b4b130 ("block: reopen the device in blkdev_reread_part")
Reported-by: Saranya Muruganandam <saranyamohan@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240417144743.2277601-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the block layer zone write plugging being automatically done for
any write operation to a zone of a zoned block device, a regular request
plugging handled through current->plug can only ever see at most a
single write request per zone. In such case, any potential reordering
of the plugged requests will be harmless. We can thus remove the special
casing for write operations to zones and have these requests plugged as
well. This allows removing the function blk_mq_plug and instead directly
using current->plug where needed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-29-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that zone block device write ordering control does not depend
anymore on mq-deadline and zone write locking, there is no need to force
select the mq-deadline scheduler when CONFIG_BLK_DEV_ZONED is enabled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-28-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zone write locking is now unused and replaced with zone write plugging.
Remove all code that was implementing zone write locking, that is, the
various helper functions controlling request zone write locking and
the gendisk attached zone bitmaps.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-27-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation to completely remove zone write locking, replace the
"zone_wlock" mq-debugfs entry that was listing zones that are
write-locked with the zone_wplugs entry which lists the zones that
currently have a write plug allocated.
The write plug information provided is: the zone number, the zone write
plug flags, the zone write plug write pointer offset and the number of
BIOs currently waiting for execution in the zone write plug BIO list.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-26-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block/blk-mq-debugfs-zone.c contains a single debugfs attribute
function. Defining this outside of block/blk-zoned.c does not really
help in any way, so move this zone related debugfs attribute to
block/blk-zoned.c and delete block/blk-mq-debugfs-zone.c.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-25-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zone append operations are only allowed to target sequential write
required zones. blk_check_zone_append() uses bio_zone_is_seq() to check
this. However, this check is not necessary because:
1) For NVMe ZNS namespace devices, only sequential write required zones
exist, making the zone type check useless.
2) For null_blk, the driver will fail the request anyway, thus notifying
the user that a conventional zone was targeted.
3) For all other zoned devices, zone append is now emulated using zone
write plugging, which checks that a zone append operation does not
target a conventional zone.
In preparation for the removal of zone write locking and its
conventional zone bitmap (used by bio_zone_is_seq()), remove the
bio_zone_is_seq() call from blk_check_zone_append().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-24-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only elevator feature ever implemented is ELEVATOR_F_ZBD_SEQ_WRITE
for signaling that a scheduler implements zone write locking to tightly
control the dispatching order of write operations to zoned block
devices. With the removal of zone write locking support in mq-deadline
and the reliance of all block device drivers on the block layer zone
write plugging to control ordering of write operations to zones, the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE is completely unused.
Remove it, and also remove the now unused code for filtering the
possible schedulers for a block device based on required features.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-23-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the block layer generic plugging of write operations for zoned
block devices, mq-deadline, or any other scheduler, can only ever
see at most one write operation per zone at any time. There is thus no
sequentiality requirements for these writes and thus no need to tightly
control the dispatching of write requests using zone write locking.
Remove all the code that implement this control in the mq-deadline
scheduler and remove advertizing support for the
ELEVATOR_F_ZBD_SEQ_WRITE elevator feature.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-22-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only user of blk_revalidate_disk_zones() second argument was the
SCSI disk driver (sd). Now that this driver does not require this
update_driver_data argument, remove it to simplify the interface of
blk_revalidate_disk_zones(). Also update the function kdoc comment to
be more accurate (i.e. there is no gendisk ->revalidate method).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-21-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The zone append emulation of the scsi disk driver was the only driver
using BLK_STS_ZONE_RESOURCE. With this code removed,
BLK_STS_ZONE_RESOURCE is now unused. Remove this macro definition and
simplify blk_mq_dispatch_rq_list() where this status code was handled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-20-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for allowing BIO based device drivers to use zone write
plugging and its zone append emulation, allow these drivers to call
blk_revalidate_disk_zones() so that all zone resources necessary to zone
write plugging can be initialized.
To do so, remove the check in blk_revalidate_disk_zones() restricting
the use of this function to mq request-based drivers to allow also
BIO-based drivers to use it. This is safe to do as long as the
BIO-based block device queue is already setup and usable, as it should,
and can be safely frozen.
The helper function disk_need_zone_resources() is added to control the
allocation and initialization of the zone write plug hash table and
of the conventional zone bitmap only for mq devices and for BIO-based
devices that require zone append emulation.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-12-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Given that zone write plugging manages all writes to zones of a zoned
block device and tracks the write pointer position of all zones that are
not full nor empty, emulating zone append operations using regular
writes can be implemented generically, without relying on the underlying
device driver to implement such emulation. This is needed for devices
that do not natively support the zone append command (e.g. SMR
hard-disks).
A device may request zone append emulation by setting its
max_zone_append_sectors queue limit to 0. For such device, the function
blk_zone_wplug_prepare_bio() changes zone append BIOs into
non-mergeable regular write BIOs. Modified zone append BIOs are flagged
with the new BIO flag BIO_EMULATES_ZONE_APPEND. This flag is checked
on completion of the BIO in blk_zone_write_plug_bio_endio() to restore
the original REQ_OP_ZONE_APPEND operation code of the BIO.
The block layer internal inline helper function bio_is_zone_append() is
added to test if a BIO is either a native zone append operation
(REQ_OP_ZONE_APPEND operation code) or if it is flagged with
BIO_EMULATES_ZONE_APPEND. Given that both native and emulated zone
append BIO completion handling should be similar, The functions
blk_update_request() and blk_zone_complete_request_bio() are modified to
use bio_is_zone_append() to execute blk_zone_update_request_bio() for
both native and emulated zone append operations.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-11-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for adding a generic zone append emulation using zone
write plugging, allow device drivers supporting zoned block device to
set a the max_zone_append_sectors queue limit of a device to 0 to
indicate the lack of native support for zone append operations and that
the block layer should emulate these operations using regular write
operations.
blk_queue_max_zone_append_sectors() is modified to allow passing 0 as
the max_zone_append_sectors argument. The function
queue_max_zone_append_sectors() is also modified to ensure that the
minimum of the max_hw_sectors and chunk_sectors limit is used whenever
the max_zone_append_sectors limit is 0. This minimum is consistent with
the value set for the max_zone_append_sectors limit by the function
blk_validate_zoned_limits() when limits for a queue are validated.
The helper functions queue_emulates_zone_append() and
bdev_emulates_zone_append() are added to test if a queue (or block
device) emulates zone append operations.
In order for blk_revalidate_disk_zones() to accept zoned block devices
relying on zone append emulation, the direct check to the
max_zone_append_sectors queue limit of the disk is replaced by a check
using the value returned by queue_max_zone_append_sectors(). Similarly,
queue_zone_append_max_show() is modified to use the same accessor so
that the sysfs attribute advertizes the non-zero limit that will be
used, regardless if it is for native or emulated commands.
For stacking drivers, a top device should not need to care if the
underlying devices have native or emulated zone append operations.
blk_stack_limits() is thus modified to set the top device
max_zone_append_sectors limit using the new accessor
queue_limits_max_zone_append_sectors(). queue_max_zone_append_sectors()
is modified to use this function as well. Stacking drivers that require
zone append emulation, e.g. dm-crypt, can still request this feature by
calling blk_queue_max_zone_append_sectors() with a 0 limit.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-10-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For a zoned block device that has no limit on the number of open zones
and no limit on the number of active zones, the zone write plug mempool
is created with a size of 128 zone write plugs. For such case, set the
device max_open_zones queue limit to this value to indicate to the user
the potential performance penalty that may happen when writing
simultaneously to more zones than the mempool size.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-9-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for adding zone write plugging, modify
blk_revalidate_disk_zones() to get the capacity of zones of a zoned
block device. This capacity value as a number of 512B sectors is stored
in the gendisk zone_capacity field.
Given that host-managed SMR disks (including zoned UFS drives) and all
known NVMe ZNS devices have the same zone capacity for all zones
blk_revalidate_disk_zones() returns an error if different capacities are
detected for different zones.
This also adds check to verify that the values reported by the device
for zone capacities are correct, that is, that the zone capacity is
never 0, does not exceed the zone size and is equal to the zone size for
conventional zones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-7-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove "static" from the definition of bio_attempt_back_merge() and
declare this function in block/blk.h to allow using it internally from
other block layer files. The definition of enum bio_merge_status is
also moved to block/blk.h.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On completion of a zone append request, the request sector indicates the
location of the written data. This value must be returned to the user
through the BIO iter sector. This is done in 2 places: in
blk_complete_request() and in blk_update_request(). Introduce the inline
helper function blk_zone_update_request_bio() to avoid duplicating
this BIO update for zone append requests, and to compile out this
helper call when CONFIG_BLK_DEV_ZONED is not enabled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Moving req_bio_endio() code into its only caller, blk_update_request(),
allows reducing accesses to and tests of bio and request fields. Also,
given that partial completions of zone append operations is not
possible and that zone append operations cannot be merged, the update
of the BIO sector using the request sector for these operations can be
moved directly before the call to bio_endio().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On completion of a flush sequence, blk_flush_restore_request() restores
the bio of a request to the original submitted BIO. However, the last
use of the request in the flush sequence may have been for a POSTFLUSH
which does not have a sector. So make sure to restore the request sector
using the iter sector of the original BIO. This BIO has not changed yet
since the completions of the flush sequence intermediate steps use
requeueing of the request until all steps are completed.
Restoring the request sector ensures that blk_mq_end_request() will see
a valid sector as originally set when the flush BIO was submitted.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkdev_dio_unaligned() is called from __blkdev_direct_IO(),
__blkdev_direct_IO_simple(), and __blkdev_direct_IO_async(), and all these
are only called from blkdev_direct_IO().
Move the blkdev_dio_unaligned() call to the common callsite,
blkdev_direct_IO().
Pass those functions the bdev pointer from blkdev_direct_IO(), as it is
non-trivial to look up.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240415122020.1541594-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=rCiN
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240412' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- UAF fix (Yu)
- Avoid out-of-bounds shift in blk-iocost (Rik)
- Fix for q->blkg_list corruption (Ming)
- Relax virt boundary mask/size segment checking (Ming)
* tag 'block-6.9-20240412' of git://git.kernel.dk/linux:
block: fix that blk_time_get_ns() doesn't update time after schedule
block: allow device to have both virt_boundary_mask and max segment size
block: fix q->blkg_list corruption during disk rebind
blk-iocost: avoid out of bounds shift
raid1: fix use-after-free for original bio in raid1_write_request()
While monitoring the throttle time of IO from iocost, it's found that
such time is always zero after the io_schedule() from ioc_rqos_throttle,
for example, with the following debug patch:
+ printk("%s-%d: %s enter %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
while (true) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (wait.committed)
break;
io_schedule();
}
+ printk("%s-%d: %s exit %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
It can be observerd that blk_time_get_ns() always return the same time:
[ 1068.096579] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.272587] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.274389] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.472690] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.474485] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.672656] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.674451] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.872655] fio-1268: ioc_rqos_throttle exit 1067901962288
And I think the root cause is that 'PF_BLOCK_TS' is always cleared
by blk_flush_plug() before scheduel(), hence blk_plug_invalidate_ts()
will never be called:
blk_time_get_ns
plug->cur_ktime = ktime_get_ns();
current->flags |= PF_BLOCK_TS;
io_schedule:
io_schedule_prepare
blk_flush_plug
__blk_flush_plug
/* the flag is cleared, while time is not */
current->flags &= ~PF_BLOCK_TS;
schedule
sched_update_worker
/* the flag is not set, hence plug->cur_ktime is not cleared */
if (tsk->flags & PF_BLOCK_TS)
blk_plug_invalidate_ts()
blk_time_get_ns
/* got the time stashed before schedule */
return plug->cur_ktime;
Fix the problem by clearing cached time in __blk_flush_plug().
Fixes: 06b23f92af ("block: update cached timestamp post schedule/preemption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240411032349.3051233-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-24-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This allows bsg_setup_queue() to pass them to blk_mq_alloc_queue() and thus
set up the limits at queue allocation time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-3-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
At the time bdev_may_open() is called, module reference is grabbed
already, hence module reference should be released if bdev_may_open()
failed.
This problem is found by code review.
Fixes: ed5cc702d3 ("block: Add config option to not allow writing to mounted devices")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240406090930.2252838-22-yukuai1@huaweicloud.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Multiple gendisk instances can allocated/added for single request queue
in case of disk rebind. blkg may still stay in q->blkg_list when calling
blkcg_init_disk() for rebind, then q->blkg_list becomes corrupted.
Fix the list corruption issue by:
- add blkg_init_queue() to initialize q->blkg_list & q->blkcg_mutex only
- move calling blkg_init_queue() into blk_alloc_queue()
The list corruption should be started since commit f1c006f1c6 ("blk-cgroup:
synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
which delays removing blkg from q->blkg_list into blkg_free_workfn().
Fixes: f1c006f1c6 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Fixes: 1059699f87 ("block: move blkcg initialization/destroy into disk allocation/release handler")
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240407125910.4053377-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bunch of flags that are purely based on what the file
operations support while also never being conditionally set or unset.
IOW, they're not subject to change for individual files. Imho, such
flags don't need to live in f_mode they might as well live in the fops
structs itself. And the fops struct already has that lonely
mmap_supported_flags member. We might as well turn that into a generic
fop_flags member and move a few flags from FMODE_* space into FOP_*
space. That gets us four FMODE_* bits back and the ability for new
static flags that are about file ops to not have to live in FMODE_*
space but in their own FOP_* space. It's not the most beautiful thing
ever but it gets the job done. Yes, there'll be an additional pointer
chase but hopefully that won't matter for these flags.
I suspect there's a few more we can move into there and that we can also
redirect a bunch of new flag suggestions that follow this pattern into
the fop_flags field instead of f_mode.
Link: https://lore.kernel.org/r/20240328-gewendet-spargel-aa60a030ef74@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
UBSAN catches undefined behavior in blk-iocost, where sometimes
iocg->delay is shifted right by a number that is too large,
resulting in undefined behavior on some architectures.
[ 186.556576] ------------[ cut here ]------------
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23
shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')
CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S E N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x8f/0xe0
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
iocg_kick_delay+0x30b/0x310
ioc_timer_fn+0x2fb/0x1f80
__run_timer_base+0x1b6/0x250
...
Avoid that undefined behavior by simply taking the
"delay = 0" branch if the shift is too large.
I am not sure what the symptoms of an undefined value
delay will be, but I suspect it could be more than a
little annoying to debug.
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240404123253.0f58010f@imladris.surriel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZg/C8wAKCRCRxhvAZXjc
oljxAQCneq62ginESgeQLw88fzSBTV4C50xXUA+Qz18AEgA/fgD+J3DlWquEHhMM
tJmfs3aUn9w7+wDpukcsLjJfJEiSYA8=
=f2Z6
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a few small fixes. This comes with some delay because I
wanted to wait on people running their reproducers and the Easter
Holidays meant that those replies came in a little later than usual:
- Fix handling of preventing writes to mounted block devices.
Since last kernel we allow to prevent writing to mounted block
devices provided CONFIG_BLK_DEV_WRITE_MOUNTED isn't set and the
block device is opened with restricted writes. When we switched to
opening block devices as files we altered the mechanism by which we
recognize when a block device has been opened with write
restrictions.
The detection logic assumed that only read-write mounted
filesystems would apply write restrictions to their block devices
from other openers. That of course is not true since it also makes
sense to apply write restrictions for filesystems that are
read-only.
Fix the detection logic using an FMODE_* bit. We still have a few
left since we freed up a couple a while ago. I also picked up a
patch to free up four additional FMODE_* bits scheduled for the
next merge window.
- Fix counting the number of writers to a block device. This just
changes the logic to be consistent.
- Fix a bug in aio causing a NULL pointer derefernce after we
implemented batched processing in aio.
- Finally, add the changes we discussed that allows to yield block
devices early even though file closing itself is deferred.
This also allows us to remove two holder operations to get and
release the holder to align lifetime of file and holder of the
block device"
* tag 'vfs-6.9-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
aio: Fix null ptr deref in aio_complete() wakeup
fs,block: yield devices early
block: count BLK_OPEN_RESTRICT_WRITES openers
block: handle BLK_OPEN_RESTRICT_WRITES correctly
There is no check for overflow of 'start + len' in blk_ioctl_discard().
Hung task occurs if submit an discard ioctl with the following param:
start = 0x80000000000ff000, len = 0x8000000000fff000;
Add the overflow validation now.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240329012319.2034550-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bio_list_merge_init instead of open coding bio_list_merge and
bio_list_init.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240328084147.2954434-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently tg_prfill_limit() uses a combination of snprintf() and strcpy()
to generate the values parts of the limits string, before passing them as
arguments to seq_printf().
Convert to use only a sequence of seq_printf() calls per argument, which is
simpler.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240327094020.3505514-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kernel parameter of `isolcpus=` or 'nohz_full=' are used to isolate CPUs
for specific task, and it isn't expected to let block IO disturb these CPUs.
blk-mq kworker shouldn't be scheduled on isolated CPUs. Also if isolated
CPUs is run for blk-mq kworker, long block IO latency can be caused.
Kernel workqueue only respects CPU isolation for WQ_UNBOUND, for bound
WQ, the responsibility is on user because CPU is specified as WQ API
parameter, such as mod_delayed_work_on(cpu), queue_delayed_work_on(cpu)
and queue_work_on(cpu).
So not run blk-mq kworker on isolated CPUs by removing isolated CPUs
from hctx->cpumask. Meantime use queue map to check if all CPUs in this
hw queue are offline instead of hctx->cpumask, this way can avoid any
cost in fast IO code path, and is safe since hctx->cpumask are only
used in the two cases.
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Andrew Theurer <atheurer@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Sebastian Jug <sejug@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Tejun Heo <tj@kernel.org>
Tesed-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20240322021244.1056223-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=zEIA
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240329' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Small round of minor fixes or cleanups for the 6.9-rc2 kernel, one
fixing an issue introduced in 6.8"
* tag 'block-6.9-20240329' of git://git.kernel.dk/linux:
block: Do not force full zone append completion in req_bio_endio()
block: don't reject too large max_user_sectors in blk_validate_limits
block: Make blk_rq_set_mixed_merge() static
This reverts commit 748dc0b65e.
Partial zone append completions cannot be supported as there is no
guarantees that the fragmented data will be written sequentially in the
same manner as with a full command. Commit 748dc0b65e ("block: fix
partial zone append completion handling in req_bio_endio()") changed
req_bio_endio() to always advance a partially failed BIO by its full
length, but this can lead to incorrect accounting. So revert this
change and let low level device drivers handle this case by always
failing completely zone append operations. With this revert, users will
still see an IO error for a partially completed zone append BIO.
Fixes: 748dc0b65e ("block: fix partial zone append completion handling in req_bio_endio()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240328004409.594888-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently a device is only really released once the umount returns to
userspace due to how file closing works. That ultimately could cause
an old umount assumption to be violated that concurrent umount and mount
don't fail. So an exclusively held device with a temporary holder should
be yielded before the filesystem is gone. Add a helper that allows
callers to do that. This also allows us to remove the two holder ops
that Linus wasn't excited about.
Link: https://lore.kernel.org/r/20240326-vfs-bdev-end_holder-v1-1-20af85202918@kernel.org
Fixes: f3a608827d ("bdev: open block device as files") # mainline only
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The original changes in v6.8 do allow for a block device to be reopened
with BLK_OPEN_RESTRICT_WRITES provided the same holder is used as per
bdev_may_open(). I think this has a bug.
The first opener @f1 of that block device will set bdev->bd_writers to
-1. The second opener @f2 using the same holder will pass the check in
bdev_may_open() that bdev->bd_writers must not be greater than zero.
The first opener @f1 now closes the block device and in bdev_release()
will end up calling bdev_yield_write_access() which calls
bdev_writes_blocked() and sets bdev->bd_writers to 0 again.
Now @f2 holds a file to that block device which was opened with
exclusive write access but bdev->bd_writers has been reset to 0.
So now @f3 comes along and succeeds in opening the block device with
BLK_OPEN_WRITE betraying @f2's request to have exclusive write access.
This isn't a practical issue yet because afaict there's no codepath
inside the kernel that reopenes the same block device with
BLK_OPEN_RESTRICT_WRITES but it will be if there is.
Fix this by counting the number of BLK_OPEN_RESTRICT_WRITES openers. So
we only allow writes again once all BLK_OPEN_RESTRICT_WRITES openers are
done.
Link: https://lore.kernel.org/r/20240323-abtauchen-klauen-c2953810082d@brauner
Fixes: ed5cc702d3 ("block: Add config option to not allow writing to mounted devices")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Last kernel release we introduce CONFIG_BLK_DEV_WRITE_MOUNTED. By
default this option is set. When it is set the long-standing behavior
of being able to write to mounted block devices is enabled.
But in order to guard against unintended corruption by writing to the
block device buffer cache CONFIG_BLK_DEV_WRITE_MOUNTED can be turned
off. In that case it isn't possible to write to mounted block devices
anymore.
A filesystem may open its block devices with BLK_OPEN_RESTRICT_WRITES
which disallows concurrent BLK_OPEN_WRITE access. When we still had the
bdev handle around we could recognize BLK_OPEN_RESTRICT_WRITES because
the mode was passed around. Since we managed to get rid of the bdev
handle we changed that logic to recognize BLK_OPEN_RESTRICT_WRITES based
on whether the file was opened writable and writes to that block device
are blocked. That logic doesn't work because we do allow
BLK_OPEN_RESTRICT_WRITES to be specified without BLK_OPEN_WRITE.
Fix the detection logic and use an FMODE_* bit. We could've also abused
O_EXCL as an indicator that BLK_OPEN_RESTRICT_WRITES has been requested.
For userspace open paths O_EXCL will never be retained but for internal
opens where we open files that are never installed into a file
descriptor table this is fine. But it would be a gamble that this
doesn't cause bugs. Note that BLK_OPEN_RESTRICT_WRITES is an internal
only flag that cannot directly be raised by userspace. It is implicitly
raised during mounting.
Passes xftests and blktests with CONFIG_BLK_DEV_WRITE_MOUNTED set and
unset.
Link: https://lore.kernel.org/r/ZfyyEwu9Uq5Pgb94@casper.infradead.org
Link: https://lore.kernel.org/r/20240323-zielbereich-mittragen-6fdf14876c3e@brauner
Fixes: 321de651fa ("block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access")
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We already cap down the actual max_sectors to the max of the hardware
and user limit, so don't reject the configuration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240326060745.2349154-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 8e756373d7 ("block: Move bio merge related functions into
blk-merge.c"), blk_rq_set_mixed_merge() has only been referenced in
blk-merge.c, so make it static.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240325083501.2816408-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZfglxgAKCRCRxhvAZXjc
ovK9APsF7/TMFhNbtW+JsghSyrEk0cOVPizi8JkRDDWNW3qY+wEAxtydhbmWpbKq
MpIjMHqwjPx3zXBL8Ec/b4vAoJqpJwQ=
=NgvO
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a few small fixes for this merge window:
- Undo the hiding of silly-rename files in afs. If they're hidden
they can't be deleted by rm manually anymore causing regressions
- Avoid caching the preferred address for an afs server to avoid
accidently overriding an explicitly specified preferred server
address
- Fix bad stat() and rmdir() interaction in afs
- Take a passive reference on the superblock when opening a block
device so the holder is available to concurrent callers from the
block layer
- Clear private data pointer in fscache_begin_operation() to avoid it
being falsely treated as valid"
* tag 'vfs-6.9-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscache: Fix error handling in fscache_begin_operation()
fs,block: get holder during claim
afs: Fix occasional rmdir-then-VNOVNODE with generic/011
afs: Don't cache preferred address
afs: Revert "afs: Hide silly-rename files from userspace"
Now that we open block devices as files we need to deal with the
realities that closing is a deferred operation. An operation on the
block device such as e.g., freeze, thaw, or removal that runs
concurrently with umount, tries to acquire a stable reference on the
holder. The holder might already be gone though. Make that reliable by
grabbing a passive reference to the holder during bdev_open() and
releasing it during bdev_release().
Fixes: f3a608827d ("bdev: open block device as files") # mainline only
Reported-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/ZfEQQ9jZZVes0WCZ@infradead.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: https://lore.kernel.org/r/CAHj4cs8tbDwKRwfS1=DmooP73ysM__xAb2PQc6XsAmWR+VuYmg@mail.gmail.com
Link: https://lore.kernel.org/r/20240315-freibad-annehmbar-ca68c375af91@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit 8a08c5fd89.
It turns out while this is a perfectly valid and long overdue thing to do
for user initiated discards / zeroing from the ioctl handler, it actually
breaks file system use of the discard helper by interrupting in places
the file system doesn't expect, and by leaving the bio chain in a state
that the file system callers of (at least) __blkdev_issue_discard do
not expect.
Revert the change for now, we'll redo it for the next merge window
after refactoring the code to better split the file system vs ioctl
callers and cleaning up a few other loose ends.
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240314021623.1908895-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code "max(1U, 3 * (1U << shift) / 4)" comes from the Kyber I/O
scheduler. The Kyber I/O scheduler maintains one internal queue per hwq
and hence derives its async_depth from the number of hwq tags. Using
this approach for the mq-deadline scheduler is wrong since the
mq-deadline scheduler maintains one internal queue for all hwqs
combined. Hence this revert.
Cc: stable@vger.kernel.org
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Cc: Zhiguo Niu <Zhiguo.Niu@unisoc.com>
Fixes: d47f9717e5 ("block/mq-deadline: use correct way to throttling write requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240313214218.1736147-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We should not have any callers of this from non-task context, but Jakub
ran [1] into one from blk-iocost. Rather than risk running into others,
or future ones, just limit blk_time_get_ns() to when it is called from
a task. Any other usage is invalid.
[1] https://lore.kernel.org/lkml/CAHk-=wiOaBLqarS2uFhM1YdwOvCX4CZaWkeyNDY1zONpbYw2ig@mail.gmail.com/
Fixes: da4c8c3d09 ("block: cache current nsec time in struct blk_plug")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 8e0ef41286.
It's broken, and causes the boot to fail on encrypted volumes.
Reported-and-bisected-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/all/20240311235023.GA1205@cmpxchg.org/
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4DwAKCRCRxhvAZXjc
ooTRAQDRI6Qz6wJym5Yblta8BScMGbt/SgrdgkoCvT6y83MtqwD+Nv/AZQzi3A3l
9NdULtniW1reuCYkc8R7dYM8S+yAwAc=
=Y1qX
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
