Emails to Robert Jones bounce ("550 5.2.1 The email account that you
tried to reach is disabled").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-5-krzysztof.kozlowski@linaro.org
Emails to Beniamin Bia and Stefan Popa bounce ("550 5.1.10
RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address
lookup").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-4-krzysztof.kozlowski@linaro.org
Emails to Joachim Eastwood bounce ("552 5.2.2 The email account that you
tried to reach is over quota and inactive.").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809162752.10186-2-krzysztof.kozlowski@linaro.org
The secure interrupt is only useful to secure world, therefore for NS
users it shouldn't be required. Make it optional.
This fixes a warning on Arm Juno board:
mhu@2b1f0000: interrupts: [[0, 36, 4], [0, 35, 4]] is too short
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220728190810.1290857-1-robh@kernel.org
'gpio-ranges' entries have a fixed size of 1 phandle plus arg 3 cells.
The qcom,ipq6018-pinctrl example is a cell short:
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.example.dtb: pinctrl@1000000: gpio-ranges:0: [1, 0, 80] is too short
From schema: /usr/local/lib/python3.10/dist-packages/dtschema/schemas/gpio/gpio.yaml
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220809214556.2489822-1-robh@kernel.org
Since commit ef8795f3f1 ("dt-bindings: kbuild: Use DTB files for
validation"), dt-mk-schema always needs a complete list of schemas, so
the conditional using DT_MK_SCHEMA_FLAGS should be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727211100.3249417-1-robh@kernel.org
As Rob reported in [1], there is one more issue present
in the 'sdhci-msm' dt-binding which shows up when a fix for
'unevaluatedProperties' handling is applied:
Documentation/devicetree/bindings/mmc/sdhci-msm.example.dtb:
mmc@8804000: Unevaluated properties are not allowed
('operating-points-v2' was unexpected)
Fix the same.
[1]. https://lore.kernel.org/lkml/20220514220116.1008254-1-bhupesh.sharma@linaro.org/
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220725202709.2861789-1-bhupesh.sharma@linaro.org
Bartlomiej's Samsung email address is not working since around last
year and there was no follow up patch take over of the drivers, so drop
the email from maintainers.
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220808101526.46556-3-krzysztof.kozlowski@linaro.org
-----BEGIN PGP SIGNATURE-----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=cDaA
-----END PGP SIGNATURE-----
Merge tag '5.20-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd updates from Steve French:
- fixes for memory access bugs (out of bounds access, oops, leak)
- multichannel fixes
- session disconnect performance improvement, and session register
improvement
- cleanup
* tag '5.20-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix heap-based overflow in set_ntacl_dacl()
ksmbd: prevent out of bound read for SMB2_TREE_CONNNECT
ksmbd: prevent out of bound read for SMB2_WRITE
ksmbd: fix use-after-free bug in smb2_tree_disconect
ksmbd: fix memory leak in smb2_handle_negotiate
ksmbd: fix racy issue while destroying session on multichannel
ksmbd: use wait_event instead of schedule_timeout()
ksmbd: fix kernel oops from idr_remove()
ksmbd: add channel rwlock
ksmbd: replace sessions list in connection with xarray
MAINTAINERS: ksmbd: add entry for documentation
ksmbd: remove unused ksmbd_share_configs_cleanup function
* more new_sync_{read,write}() speedups - ITER_UBUF introduction
* ITER_PIPE cleanups
* unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
* making ITER_PIPE take high-order pages without splitting them
* handling copy_page_from_iter() for high-order pages properly
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYvHI8QAKCRBZ7Krx/gZQ
62CQAPsGlbebqBeAT2pMulaGDxfLAsgz5Yf4BEaMLhPtRqFOQgD+KrZQId7Sd8O0
3IWucpTb2c4jvLlXhGMS+XWnusQH+AQ=
=pBux
-----END PGP SIGNATURE-----
Merge tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more iov_iter updates from Al Viro:
- more new_sync_{read,write}() speedups - ITER_UBUF introduction
- ITER_PIPE cleanups
- unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
- making ITER_PIPE take high-order pages without splitting them
- handling copy_page_from_iter() for high-order pages properly
* tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
fix copy_page_from_iter() for compound destinations
hugetlbfs: copy_page_to_iter() can deal with compound pages
copy_page_to_iter(): don't split high-order page in case of ITER_PIPE
expand those iov_iter_advance()...
pipe_get_pages(): switch to append_pipe()
get rid of non-advancing variants
ceph: switch the last caller of iov_iter_get_pages_alloc()
9p: convert to advancing variant of iov_iter_get_pages_alloc()
af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages()
iter_to_pipe(): switch to advancing variant of iov_iter_get_pages()
block: convert to advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: saner helper for page array allocation
fold __pipe_get_pages() into pipe_get_pages()
ITER_XARRAY: don't open-code DIV_ROUND_UP()
unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts
unify xarray_get_pages() and xarray_get_pages_alloc()
unify pipe_get_pages() and pipe_get_pages_alloc()
iov_iter_get_pages(): sanity-check arguments
iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper
...
now that we are advancing the iterator, there's no need to
treat the first page separately - just call append_pipe()
in a loop.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
mechanical change; will be further massaged in subsequent commits
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
here nothing even looks at the iov_iter after the call, so we couldn't
care less whether it advances or not.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and untangle the cleanup on failure to add into pipe.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.
Provide inline wrappers doing that, convert trivial open-coded
uses of those.
BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All call sites of get_pages_array() are essenitally identical now.
Replace with common helper...
Returns number of slots available in resulting array or 0 on OOM;
it's up to the caller to make sure it doesn't ask to zero-entry
array (i.e. neither maxpages nor size are allowed to be zero).
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and don't mangle maxsize there - turn the loop into counting
one instead. Easier to see that we won't run out of array that
way. Note that special treatment of the partial buffer in that
thing is an artifact of the non-advancing semantics of
iov_iter_get_pages() - if not for that, it would be append_pipe(),
same as the body of the loop that follows it. IOW, once we make
iov_iter_get_pages() advancing, the whole thing will turn into
calculate how many pages do we want
allocate an array (if needed)
call append_pipe() that many times.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
same as for pipes and xarrays; after that iov_iter_get_pages() becomes
a wrapper for __iov_iter_get_pages_alloc().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The differences between those two are
* pipe_get_pages() gets a non-NULL struct page ** value pointing to
preallocated array + array size.
* pipe_get_pages_alloc() gets an address of struct page ** variable that
contains NULL, allocates the array and (on success) stores its address in
that variable.
Not hard to combine - always pass struct page ***, have
the previous pipe_get_pages_alloc() caller pass ~0U as cap for
array size.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
zero maxpages is bogus, but best treated as "just return 0";
NULL pages, OTOH, should be treated as a hard bug.
get rid of now completely useless checks in xarray_get_pages{,_alloc}().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Incidentally, ITER_XARRAY did *not* free the sucker in case when
iter_xarray_populate_pages() returned 0...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All their callers are next to each other; all of them
want the total amount of pages and, possibly, the
offset in the partial final buffer.
Combine into a new helper (pipe_npages()), fix the
bogosity in pipe_space_for_user(), while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fold pipe_truncate() into it, clean up. We can release buffers
in the same loop where we walk backwards to the iterator beginning
looking for the place where the new position will be.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
instead of setting ->iov_offset for new position and calling
pipe_truncate() to adjust ->len of the last buffer and discard
everything after it, adjust ->len at the same time we set ->iov_offset
and use pipe_discard_from() to deal with buffers past that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
it's only used to get to the partial buffer we can add to,
and that's always the last one, i.e. pipe->head - 1.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Expand the only remaining call of push_pipe() (in
__pipe_get_pages()), combine it with the page-collecting loop there.
Note that the only reason it's not a loop doing append_pipe() is
that append_pipe() is advancing, while iov_iter_get_pages() is not.
As soon as it switches to saner semantics, this thing will switch
to using append_pipe().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
New helper: append_pipe(). Extends the last buffer if possible,
allocates a new one otherwise. Returns page and offset in it
on success, NULL on failure. iov_iter is advanced past the
data we've got.
Use that instead of push_pipe() in copy-to-pipe primitives;
they get simpler that way. Handling of short copy (in "mc" one)
is done simply by iov_iter_revert() - iov_iter is in consistent
state after that one, so we can use that.
[Fix for braino caught by Liu Xinpeng <liuxp11@chinatelecom.cn> folded in]
[another braino fix, this time in copy_pipe_to_iter() and pipe_zero();
caught by testcase from Hugh Dickins]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are only two kinds of pipe_buffer in the area used by ITER_PIPE.
1) anonymous - copy_to_iter() et.al. end up creating those and copying
data there. They have zero ->offset, and their ->ops points to
default_pipe_page_ops.
2) zero-copy ones - those come from copy_page_to_iter(), and page
comes from caller. ->offset is also caller-supplied - it might be
non-zero. ->ops points to page_cache_pipe_buf_ops.
Move creation and insertion of those into helpers - push_anon(pipe, size)
and push_page(pipe, page, offset, size) resp., separating them from
the "could we avoid creating a new buffer by merging with the current
head?" logics.
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pipe_buffer instances of a pipe are organized as a ring buffer,
with power-of-2 size. Indices are kept *not* reduced modulo ring
size, so the buffer refered to by index N is
pipe->bufs[N & (pipe->ring_size - 1)].
Ring size can change over the lifetime of a pipe, but not while
the pipe is locked. So for any iov_iter primitives it's a constant.
Original conversion of pipes to this layout went overboard trying
to microoptimize that - calculating pipe->ring_size - 1, storing
it in a local variable and using through the function. In some
cases it might be warranted, but most of the times it only
obfuscates what's going on in there.
Introduce a helper (pipe_buf(pipe, N)) that would encapsulate
that and use it in the obvious cases. More will follow...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use pipe_discard_from() explicitly in generic_file_read_iter(); don't bother
with rather non-obvious use of iov_iter_advance() in there.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc, with
the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is also
introduced, to avoid out-of-sync updates for rapidly restarting remote
processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces a
number of smaller fixes and cleanups in the core and a few different
drivers.
-----BEGIN PGP SIGNATURE-----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=gbAX
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc,
with the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is
also introduced, to avoid out-of-sync updates for rapidly restarting
remote processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces
a number of smaller fixes and cleanups in the core and a few different
drivers"
* tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits)
remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found
drivers/remoteproc: fix repeated words in comments
remoteproc: Directly use ida_alloc()/free()
remoteproc: Use unbounded workqueue for recovery work
remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators
remoteproc: sysmon: Send sysmon state only for running rprocs
remoteproc: sysmon: Wait for SSCTL service to come up
remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq
remoteproc: qcom: pas: Check if coredump is enabled
remoteproc: qcom: pas: Mark devices as wakeup capable
remoteproc: qcom: pas: Mark va as io memory
remoteproc: qcom: pas: Add decrypt shutdown support for modem
remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
remoteproc: qcom_q6v5: Introduce panic handler for MSS
remoteproc: qcom_q6v5_mss: Update MBA log info
remoteproc: qcom: correct kerneldoc
remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code
remoteproc: mediatek: Support MT8188 SCP
...
This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and
GLINK drivers, a circular lock dependency in the Mediatek driver and the
a possible race condition in the rpmsg_char driver is resolved.
-----BEGIN PGP SIGNATURE-----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=xoKP
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and
GLINK drivers, a circular lock dependency in the Mediatek driver and
a possible race condition in the rpmsg_char driver is resolved"
* tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: convert sysfs snprintf to sysfs_emit
rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge
rpmsg: qcom: correct kerneldoc
rpmsg: qcom: glink: remove unused name
rpmsg: qcom: glink: replace strncpy() with strscpy_pad()
rpmsg: Strcpy is not safe, use strscpy_pad() instead
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
rpmsg: Fix parameter naming for announce_create/destroy ops
rpmsg: mtk_rpmsg: Fix circular locking dependency
rpmsg: char: Add mutex protection for rpmsg_eptdev_open()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmLvs58ACgkQ+iyteGJfRso79wCeNvcoRsn0oAyjuWaElPp0cTJq
5zwAni7zKz4VAOPaC9u5gNQoaj5+ZeKK
=XMqt
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.20-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add RTL9310 support
- sp805_wdt: add arm cmsdk apb wdt support
- Remove #ifdef guards for PM related functions for several watchdog
device drivers
- pm8916_wdt reboot improvements
- Several other fixes and improvements
* tag 'linux-watchdog-5.20-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
watchdog: armada_37xx_wdt: check the return value of devm_ioremap() in armada_37xx_wdt_probe()
watchdog: dw_wdt: Fix comment typo
watchdog: Fix comment typo
dt-bindings: watchdog: Add fsl,scu-wdt yaml file
watchdog:Fix typo in comment
watchdog: pm8916_wdt: Handle watchdog enabled by bootloader
watchdog: pm8916_wdt: Report reboot reason
watchdog: pm8916_wdt: Avoid read of write-only PET register
watchdog: wdat_wdt: Remove #ifdef guards for PM related functions
watchdog: tegra_wdt: Remove #ifdef guards for PM related functions
watchdog: st_lpc_wdt: Remove #ifdef guards for PM related functions
watchdog: sama5d4_wdt: Remove #ifdef guards for PM related functions
watchdog: s3c2410_wdt: Remove #ifdef guards for PM related functions
watchdog: mtk_wdt: Remove #ifdef guards for PM related functions
watchdog: dw_wdt: Remove #ifdef guards for PM related functions
watchdog: bcm7038_wdt: Remove #ifdef guards for PM related functions
watchdog: realtek-otto: add RTL9310 support
dt-bindings: watchdog: realtek,otto-wdt: add RTL9310
watchdog: sp805_wdt: add arm cmsdk apb wdt support
watchdog: sp5100_tco: Fix a memory leak of EFCH MMIO resource
...
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmLxUA0SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxypYQAK/sYS76XzKRjVsPmC082FVlA9Helhsa
Op50DSnhfzYAWrtRZM5VPsV2CgQkmc5KCmZJSd1ZKIFcOpjlJT/rvaVaSH7Ltcn5
52GOus6KXKCL3FegQLy3bLcmKkEJIXb3uhWE2VlSuj2cxx6KE2g4bUwPE0pRr++Y
RkfaT6hcUzxxOAKw1cQhdXgBoXKL/ZeypmpZ95joYuas/mozKskM5SQFX455JCQ9
t4vaRzrsHzxi5ELiML75TYMY97sF367wSs+4jZSgPBllbJcRXEMg+JkTccKRYrsZ
k/kDvP5xVFzKT/dYpNpW3u/pl94+xZuh5WLF9/AqwC/qs7kLPJJ0/8mfTTd63DjZ
3KrkimiQ3d2XMAL4L6FoK+T8v6MwzmlN0elmHHdtmu9mY+v01CwAzjpxdvaFoELK
V6BCRRX8KNwYsrAJ4EpDK9TvPYJf8yT3jvGDcjPZY9RYlebje0Q825XOcxea4Dfe
oFxiEWgfK9gzOBvaa24oifKDy2RVy6FvR43qQeiPG4AWAFjr4qP9cDO4q5OL/BuE
sXpsGY5NE/e8JH9hkgmUK1ms50zk4UMbRC5ZoZuHWyiaFlJdMRF3cUGHe3ylPrxb
XOFZz8Zl4WeAqBjGGHuiMedwEbmQH2RhdAMCQO1nxoq3UXy6E2/ojI1G1uQ9IEm0
5FFouJ+bEnqO
=LBb0
-----END PGP SIGNATURE-----
Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
- Fix NULL pointer dereference in the thermal sysfs interface that
results from an error code path mishandling (Rafael Wysocki).
- Drop COMPILE_TEST dependency that's not needed any more from two
thermal Kconfig entries (Jean Delvare).
- Make the Intel TCC cooling driver support Alder Lake-N and Raptor
Lake-P (Sumeet Pawnikar).
- Fix possible path truncations in the tmon utility (Florian Fainelli).
-----BEGIN PGP SIGNATURE-----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=8JEE
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix an error code path issue leading to a NULL pointer
dereference, drop Kconfig dependencies that are not needed any more
after recent changes, add CPU IDs for new chips to a driver and fix up
the tmon utility.
Specifics:
- Fix NULL pointer dereference in the thermal sysfs interface that
results from an error code path mishandling (Rafael Wysocki).
- Drop COMPILE_TEST dependency that's not needed any more from two
thermal Kconfig entries (Jean Delvare).
- Make the Intel TCC cooling driver support Alder Lake-N and Raptor
Lake-P (Sumeet Pawnikar).
- Fix possible path truncations in the tmon utility (Florian
Fainelli)"
* tag 'thermal-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/thermal: Fix possible path truncations
thermal: Drop obsolete dependency on COMPILE_TEST
thermal: sysfs: Fix cooling_device_stats_setup() error code path
thermal: intel: Add TCC cooling support for Alder Lake-N and Raptor Lake-P
There isn't much for 6.0 for sysctl stuff, most of the stuff
went through the networking subsystem (Kuniyuki Iwashima's
trove of fixes using READ_ONCE/WRITE_ONCE helpe) as most of
the issues there have been identified on networking side. So
it is good we don't have much updates as we would have ended
up with tons of conflicts. I rebased my delta just now to
your tree so to avoid conflicts with that stuff. This merge
request is just minor fluff cleanups then. Perhaps for 6.1
kernel/sysctl.c will get more love than this release.
-----BEGIN PGP SIGNATURE-----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=21dd
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"There isn't much for 6.0 for sysctl stuff, most of the stuff went
through the networking subsystem (Kuniyuki Iwashima's trove of fixes
using READ_ONCE/WRITE_ONCE helpers) as most of the issues there have
been identified on networking side. So it is good we don't have much
updates as we would have ended up with tons of conflicts. I rebased my
delta just now to your tree so to avoid conflicts with that stuff.
This merge request is just minor fluff cleanups then. Perhaps for 6.1
kernel/sysctl.c will get more love than this release"
* tag 'sysctl-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
kernel/sysctl.c: Remove trailing white space
kernel/sysctl.c: Clean up indentation, replace spaces with tab.
sysctl: Merge adjacent CONFIG_TREE_RCU blocks
