Positivo SU C1400 is equipped with ALC256, and it needs
ALC269_FIXUP_ASPIRE_HEADSET_MIC quirk to make its headset mic work.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240712180642.22564-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few fairly small fixes for ASoC, there's a relatively large set of
hardening changes for the cs_dsp firmware file parsing and a couple of
other small device specific fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaP7ksACgkQJNaLcl1U
h9Cpxgf/Sa+bDU17hG8pcS7WkPcBzZcwnbjEr/6rn2iilscZYn8YwhrXXadSMZp/
nAawm+ix+ErlfJZaR7kTbRQsthFVnYxyVjpLrWfW3iCdqD/jw00pzxjU7r8/uNKM
Sp2idj9Y0mH0ggfNQMzbnhXE09uY6gZqAf1KjwGmC59aUu6imVIEX3i0Swfetljs
1Ndc5Ub75ouRrbC20BVHMLm7hbOY8+k+gs9GUhEvanVgJ9f3pyCPNwJvWCVRFq1q
5aZYjqMBNuuaxZqtKhnUlddFTe7NLXffulFhrf8T/n2TvMvq3B+2jHoAXHoNTLV4
c9WZ6PmDsk6gKaG8/uZfOgMFzUz46w==
=gHJp
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.10-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A few fairly small fixes for ASoC, there's a relatively large set of
hardening changes for the cs_dsp firmware file parsing and a couple of
other small device specific fixes.
HP 250 G7 has a mute LED that can be made to work using quirk
ALC269_FIXUP_HP_LINE1_MIC1_LED. Enable already existing quirk.
Signed-off-by: Nazar Bilinskyi <nbilinskyi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240709080546.18344-1-nbilinskyi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240708130254.9631-2-u.kleine-koenig@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MIDI2 Set Tempo message defines the tempo in 10ns unit for finer
accuracy, while MIDI1 was defined in 1us unit. For adapting this
different unit, introduce "tempo_base" field to snd_seq_queue_tempo
struct so that user-space can pass the proper tempo base unit.
The accepted value is limited, it must be either 0, 10 or 1000.
The protocol version is bumped to 1.0.4 along with this.
The access with the older protocol version ignores the tempo-base
value in ioctls and always treats as 1000.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20240705160344.6481-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal mic boost on the VAIO models VJFE-CL and VJFE-IL is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240705141012.5368-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Laptop 10431A63 contains valid _DSD, but missing Speaker ID
description. Add this discription, but keep the rest of the _DSD to
ensure the correct firmware and tuning is loaded for this laptop.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703140802.27688-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDaudio specification Section 3.6.2 limits the number of BDL entries to 256.
Make sure we don't allow more periods than this normative value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240704090106.371497-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Those registers will be used when JD source is RT711_JD2_1P8V_1PORT.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20240704092327.652609-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system enters suspend with an active stream, SOF core
calls hw_params_upon_resume(). On Intel platforms with HDA DMA used
to manage the link DMA, this leads to call chain of
hda_dsp_set_hw_params_upon_resume()
-> hda_dsp_dais_suspend()
-> hda_dai_suspend()
-> hda_ipc4_post_trigger()
A bug is hit in hda_dai_suspend() as hda_link_dma_cleanup() is run first,
which clears hext_stream->link_substream, and then hda_ipc4_post_trigger()
is called with a NULL snd_pcm_substream pointer.
Fixes: 2b009fa082 ("ASoC: SOF: Intel: hda: Unify DAI drv ops for IPC3 and IPC4")
Link: https://github.com/thesofproject/linux/issues/5080
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240704085708.371414-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Optimize the memory usage in struct snd_pcm_runtime - use boolean
value for the standard sync ID scheme.
Introduce snd_pcm_set_sync_per_card function to build synchronization
IDs.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240625172836.589380-3-perex@perex.cz
Until the commit e11f0f90a6 ("ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO
internal command"), there was a possibility to pass information
about the synchronized streams to the user space. The mentioned
commit removed blindly the appropriate code with an irrelevant comment.
The revert may be appropriate, but since this API was lost for several
years without any complains, it's time to improve it. The hardware
parameters may change the used stream clock source (e.g. USB hardware)
so move this synchronization ID to hw_params as read-only field.
It seems that pipewire can benefit from this API (disable adaptive
resampling for perfectly synchronized PCM streams) now.
Note that the contents of ID is not supposed to be used for direct
comparison with a specific byte sequence. The "empty" case is when
all bytes are zero (driver does not offer this information)
and all other cases must be only used for equal comparison among
PCM streams (including different sound cards) if they are using
identical hardware clock.
Cc: Takashi Sakamoto <takaswie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240625172836.589380-2-perex@perex.cz
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZ8WXYACgkQJNaLcl1U
h9AspQf/bpCUI0n5Ug9gVnIruIjAs7B5M1ctlkwTdKmNs1du3Qsd5/5Ucu1tqhSx
Y/yvB4VZTWOYLbgT2rjQgt9hEiBaCbrs3QFdL+Row0+qSrngydVbng2yKacMg1ii
IlqvhGvYZdODUL8SyoehlQXMN3OXOPzX2RVeAu9BVblXmeHYlNF8c/SfYvXJuto6
iJPYUV22+aOZsg+9kvnAb1KqlaZkPPPmLoKBVcFgoz+A3fVzzazMsDcBXGKLDFBX
OEtTjtGGb/facOqvaUhc/TS7Ug5Dk/cO9G8rErECwdV4vvFB2UCWkmL/bohcXax1
b9QJfMG08ucCWlKmZfbww1Oq8rX+sg==
=kPZz
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry,
and this eventually breaks the existing quirk for Lenovo Yoga Duet 7
13ITL6 equipped with the same PCI SSID 17aa:3820.
For applying a proper quirk for each model, check the codec SSID
additionally. Fortunately Yoga Duet has a different codec SSID,
0x17aa3802.
(Interestingly, 17aa:3802 has another conflict of SSID between another
Yoga model vs 14IRP8 which we had to work around similarly.)
Fixes: b1fd0d1285 ("ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM")
Link: https://patch.msgid.link/20240625155217.18767-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both snd_dmaengine_pcm_close() and
snd_dmaengine_pcm_close_release_chan() are almost identical except for
a call of dma_release_channel() in the latter. For code
simplification, unify them internally.
Just a code refactoring, and no functional changes.
Link: https://patch.msgid.link/20240625113356.2123-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This HP Laptop uses ALC236 codec with COEF 0x07 controlling
the mute LED. Enable existing quirk for this device.
Signed-off-by: Aivaz Latypov <reichaivaz@gmail.com>
Link: https://patch.msgid.link/20240625081217.1049-1-reichaivaz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The conversion from the legacy event to MIDI2 UMP for RPN and NRPN
missed the setup of the channel number, resulting in always the
channel 0. Fix it.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240625095200.25745-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit e70b8dd267 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd267 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240624061257.3115467-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f0 ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the
serial multi-instantiate driver which starts multiple Linux device
instances from a single ACPI Device() node.
As serial multi-instantiate is not an optional part of the system add it
as a dependency in Kconfig so that it is not overlooked.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
chip->flag variable assignment will be skipped when acp platform device
creation is skipped. In this case chip>flag value will not be set.
chip->flag variable should be assigned along with other structure
variables for 'chip' structure. Move chip->flag variable assignment
prior to acp platform device creation.
Fixes: 3a94c8ad0a ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP supports different pin configurations for I2S IO. Checking ACP pin
configuration value against specific value breaks the functionality for
other I2S pin configurations. This check is no longer required in i2s dai
driver probe call as i2s configuration check will be verified during acp
platform device creation sequence.
Remove i2s_mode check in acp_i2s_probe() function.
Fixes: b24484c18b ("ASoC: amd: acp: ACP code generic to support newer platforms")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When acp platform device creation is skipped, chip->chip_pdev value will
remain NULL. Add NULL check for chip->chip_pdev structure in
snd_acp_resume() function to avoid null pointer dereference.
Fixes: 088a40980e ("ASoC: amd: acp: add pm ops support for acp pci driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dell SKU 0C64 has a single rt1318 amplifier.
The prefix name of control still needs to be set rt1318-1 corresponding to UCM config.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240612075740.1678082-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is possible that during system boot when there multiple devices
attempting simultaneous initialization on a slow control bus the
download of firmware and tuning data may take a user perceivable amount
of time (a slow I2C bus with 4 amps this work could take over 2
seconds).
Adopt a pattern used in the ASoC driver and perform this activity in a
background thread so that interactive performance is not impaired. The
system_long_wq is a parallel workqueue and driver instances will perform
their firmware downloads in parallel to make best use of available bus
bandwidth.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240618130011.62860-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are lots of code checking NULL for kcontrol passed to
snd_ctl_remove() in the caller side. Let's make snd_ctl_remove()
accepting the NULL kcontrol instead a la free(), so that we can clean
up the caller side.
Link: https://lore.kernel.org/20240617100529.6667-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a simple sanity check to HD-audio HDMI Channel Map controls.
Although the value might not be accepted for the actual connection, we
can filter out some bogus values beforehand, and that should be enough
for making kselftest happier.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-7-tiwai@suse.de
The values returned from Playback Channel Map and Capture Channel Map
controls may vary dynamically depending on the corresponding PCM
stream. Mark those as volatile to indicate the values are unstable
and not suitable for testing.
Note that we may change the driver to return -EINVAL, but this would
bring other side effects, such as "alsactl restore" would start
receiving unexpected errors. So we still keep returning 0 for those
invalid inputs.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-6-tiwai@suse.de
Although we have already a mechanism for sanity checks of input values
for control writes, it's not applied unless the kconfig
CONFIG_SND_CTL_INPUT_VALIDATION is set due to the performance reason.
Nevertheless, it still makes sense to apply the same check for user
elements despite of its cost, as that's the only way to filter out the
invalid values; the user controls are handled solely in ALSA core
code, and there is no corresponding driver, after all.
This patch adds the same input value validation for user control
elements at its put callback. The kselftest will be happier with this
change, as the incorrect values will be bailed out now with errors.
For other normal controls, the check is applied still only when
CONFIG_SND_CTL_INPUT_VALIDATION is set.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-4-tiwai@suse.de
So far the HD-audio driver has been tolerant about the input values
and accepts any values by correcting the amp volume and switch values
internally. But now our own selftest starts complaining about this
behavior, so let's be picky and change the behavior to return -EINVAL
for invalid input values instead.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-3-tiwai@suse.de
So far the vmaster code has been tolerant about the input values and
accepts any values by correcting internally. But now our own selftest
starts complaining about this behavior, so let's be picky and change
the behavior to return -EINVAL for invalid input values instead.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-2-tiwai@suse.de
