Commit Graph

28 Commits

Author SHA1 Message Date
Marek Szyprowski
3eaf2da989 phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250
Exynos5420 variant of USB2 PHY is handled by the same code as the
Exynos5250 one. Introducing a separate Kconfig symbol for it was an
over-engineering, which turned out to cause build break for certain
configurations:

ERROR: modpost: "exynos5420_usb2_phy_config" [drivers/phy/samsung/phy-exynos-usb2.ko] undefined!

Fix this by removing PHY_EXYNOS5420_USB2 symbol and using
PHY_EXYNOS5250_USB2 also for Exynos5420 SoCs.

Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Fixes: 81b534f7e9 ("phy: samsung: Add support for the Exynos5420 variant of the USB2 PHY")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20201202064759.24300-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-02 12:35:07 +05:30
Marek Szyprowski
81b534f7e9 phy: samsung: Add support for the Exynos5420 variant of the USB2 PHY
Exynos5420 differs a bit from Exynos5250 in USB2 PHY related registers in
the PMU region. Add a variant for the Exynos5420 case. Till now, USB2 PHY
worked only because the bootloader enabled the PHY, but then driver messed
USB 3.0 DRD related registers during the suspend/resume cycle.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120085637.7299-2-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-30 16:20:59 +05:30
Vinod Koul
768a711e2d phy: samsung: phy-exynos-pcie: fix typo 'tunning'
Fix the typo s/tunning/tuning

Fixes: 496db02914 ("phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-20 16:04:01 +05:30
Jaehoon Chung
496db02914 phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY
Exynos5440 SoC support has been dropped since commit 8c83315da1 ("ARM:
dts: exynos: Remove Exynos5440"). Rework this driver to support PCIe PHY
variant found in the Exynos5433 SoCs.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[mszyprow: reworked the driver to support only Exynos5433 variant, rebased
	   onto current kernel code, rewrote commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Link: https://lore.kernel.org/r/20201120102627.14450-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-20 16:02:09 +05:30
Chunfeng Yun
2f0c9fac3b phy: samsung: convert to devm_platform_ioremap_resource
Use devm_platform_ioremap_resource to simplify code

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1604642930-29019-14-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16 12:47:47 +05:30
Rikard Falkeborn
f9781f7f97 phy: samsung-ufs: Constify samsung_ufs_phy_ops
The only usage is to pass its address to devm_phy_create() which takes a
const pointer. Make it const to allow the compiler to put it in
read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200823220025.17588-8-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-31 14:36:37 +05:30
Anand Moon
a85643d47d phy: samsung: Use readl_poll_timeout function
Instead of a busy waiting while loop using udelay
use readl_poll_timeout function to check the condition
is met or timeout occurs in crport_handshake function.
readl_poll_timeout is called in non atomic context so
it safe to sleep until the condition is met.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20200720173502.542-1-linux.amoon@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-23 19:36:37 +05:30
Greg Kroah-Hartman
1859a772e2 phy for 5.9
- New PHY Drivers:
    - Samsung UFS
    - Qcom USB DWC for ipq806x
    - Xilinx ZynqMP Gigabit Transceiver
    - Qcom USB QMP for IPQ8074
    - BCM63xx USBH
 
  - Removed:
    - Qcom ufs qmp phy driver
 
  - Updates:
    - Support for Qcom SM8250 QMP V4 USB3 UNIPHY
    - qcom-snps runtime pm support
    - Cleanup of W=1 warns in the subsystem
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl8ZOkIACgkQfBQHDyUj
 g0el3g//Q/e0qIg7WybLWhbB7tGO5lP/OFOVVwVB54w35VX8cCiCuuqeiaENJ81e
 x4Y8DUlKxTL0XkDwNs+yp6njU6kjZjFk1+xWnFBQIFczXWbLezNlwM2rkjwAI0oO
 A3PW0qbWuhgc7tRfQ9ULnrG6kHtvRohT/E/Qe6nUhYaz2LJ96pY5rBg8vzrQxoXn
 4vMs79dGqnxlhDASE5yKLYTus5/ntMRQCiblQjxnfRqGaNTgj40iejxzj7FEch/d
 H3x2/ylY9PTHXzIlrM1KdcBeKz0tfBZHOer7/kGhfmGGsoMNW8DUTEMgVzOBp+Yb
 VHyQBHWcVKvvv1q5XCNRN1GuGgOdNAblfmMwRQVxafNOP+tqKDdmy2LHFzA3MrDv
 XqxRXwmegTOJJ+Wl/pSXoRtergCXJhDNo5HDY03vlDj1AvYMxjHIjyay629ZD64C
 S0hxViw7Y+4W5y3DET69axRNB7ckgMuPniUf1MRSSTXLBSrL5jaCA9WvTcSeGI2y
 8kVmro5zybn3DqVMrd5q/LaHpMwYkK8Iy5BrZYJWmDYj3jsOYp96CVTc07//btOW
 vmjYU0h0YJupPtYZTOKBY7d9BEys3Xp4tUaiz9ymBOMSsXJKoD4u3OH1ePGV9/Zm
 5S7WEWb3jBjc6WdjSW2eHeMG/+gj3K5Rcg3JAcm3E8E4W8djKLE=
 =pkO8
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy for 5.9

 - New PHY Drivers:
   - Samsung UFS
   - Qcom USB DWC for ipq806x
   - Xilinx ZynqMP Gigabit Transceiver
   - Qcom USB QMP for IPQ8074
   - BCM63xx USBH

 - Removed:
   - Qcom ufs qmp phy driver

 - Updates:
   - Support for Qcom SM8250 QMP V4 USB3 UNIPHY
   - qcom-snps runtime pm support
   - Cleanup of W=1 warns in the subsystem

* tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (46 commits)
  phy: qualcomm: fix setting of tx_deamp_3_5db when device property read fails
  phy: bcm63xx-usbh: Add BCM63xx USBH driver
  dt-bindings: phy: add bcm63xx-usbh bindings
  phy: armada-38x: fix NETA lockup when repeatedly switching speeds
  dt: update Marvell Armada 38x COMPHY binding
  phy: samsung-ufs: Fix IS_ERR argument
  dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support
  dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support
  phy: renesas: rcar-gen3-usb2: exit if request_irq() failed
  phy: renesas: rcar-gen3-usb2: move irq registration to init
  devicetree: bindings: phy: Document ipq806x dwc3 qcom phy
  phy: qualcomm: add qcom ipq806x dwc usb phy driver
  phy: samsung-ufs: add UFS PHY driver for samsung SoC
  dt-bindings: phy: Document Samsung UFS PHY bindings
  phy: sun4i-usb: explicitly include gpio/consumer.h
  phy: stm32: use NULL instead of zero
  phy: exynos5-usbdrd: use correct format for structure description
  phy: rockchip-typec: use correct format for structure description
  phy: xgene: remove unsigned integer comparison with less than zero
  phy: mapphone-mdm6600: Add missing description for some structure fields
  ...
2020-07-23 09:52:10 +02:00
Gustavo A. R. Silva
e9f84ec63c phy: samsung-ufs: Fix IS_ERR argument
Fix IS_ERR argument in samsung_ufs_phy_symbol_clk_init(). The proper
argument to be passed to IS_ERR() is phy->rx1_symbol_clk.

This bug was detected with the help of Coccinelle.

Fixes: bca21e9304 ("phy: samsung-ufs: add UFS PHY driver for samsung SoC")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20200720132718.GA13413@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:09:11 +05:30
Alim Akhtar
bca21e9304 phy: samsung-ufs: add UFS PHY driver for samsung SoC
This patch introduces Samsung UFS PHY driver. This driver
supports to deal with phy calibration and power control
according to UFS host driver's behavior.

[Robot: -Wmissing-prototypes and -Wsometimes-uninitialized]
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Seungwon Jeon <essuuj@gmail.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20200716192217.35740-2-alim.akhtar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-17 13:35:30 +05:30
Vinod Koul
0672fb0d42 phy: exynos5-usbdrd: use correct format for structure description
We get warning with W=1 build:
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'phys' not described in 'exynos5_usbdrd_phy'
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'vbus' not described in 'exynos5_usbdrd_phy'
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'vbus_boost' not described in 'exynos5_usbdrd_phy'

These members are provided with description but format is not quite
right resulting in above warnings

Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200708132809.265967-5-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-13 12:14:58 +05:30
Marek Szyprowski
dcbabfeb17 phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY
PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling
calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY.

Fixes: d8c80bb3b5 ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200708133800.3336-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-13 10:43:09 +05:30
Krzysztof Kozlowski
c233a2edf8 phy: exynos: Rename Exynos to lowercase
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.

"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Link: https://lore.kernel.org/r/20200617152803.17941-1-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24 22:44:19 +05:30
Gustavo A. R. Silva
50f894d50a phy: samsung: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-15 23:08:32 -05:00
Jonathan Bakker
05942b8c36 phy: samsung: s5pv210-usb2: Add delay after reset
The USB phy takes some time to reset, so make sure we give it to it. The
delay length was taken from the 4x12 phy driver.

This manifested in issues with the DWC2 driver since commit fe369e1826
("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.")
where the endianness check would read the DWC ID as 0 due to the phy still
resetting, resulting in the wrong endian mode being chosen.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-13 08:27:35 +05:30
Linus Torvalds
aac9662671 USB/Thunderbolt/PHY driver updates for 5.6-rc1
Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1.
 
 With the advent of USB4, "Thunderbolt" has really become USB4, so the
 renaming of the Kconfig option and starting to share subsystem code has
 begun, hence both subsystems coming in through the same tree here.
 
 PHY driver updates also touched USB drivers, so that is coming in
 through here as well.
 
 Major stuff included in here are:
 	- USB 4 initial support added (i.e. Thunderbolt)
 	- musb driver updates
 	- USB gadget driver updates
 	- PHY driver updates
 	- USB PHY driver updates
 	- lots of USB serial stuff fixed up
 	- USB typec updates
 	- USB-IP fixes
 	- lots of other smaller USB driver updates
 
 All of these have been in linux-next for a while now (the usb-serial
 tree is already tested in linux-next on its own before merged into
 here), with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFTNw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynpKQCgrh2FoobS2x0oFg/OUHdjokQV/BYAoJGWLOmt
 8S5cnsCuLq3w5qpCcBva
 =PMGd
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...
2020-01-29 10:09:44 -08:00
Krzysztof Kozlowski
203b7ee14d phy: Enable compile testing for some of drivers
Some of the phy drivers can be compile tested to increase build
coverage.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200103164710.4829-2-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-06 10:35:00 +01:00
Marek Szyprowski
6aeec986f1 phy: samsung: disable bind/unbind platform driver feature
Samsung PHY drivers control the power to the SoC core components needed by
their client devices (USB HCDs, SATA, camera ISP bridge, DP encoder) to
properly operate. Disabling PHYs in runtime usually causes the client
device to crash with external abort exception or similar issue due to lack
of API to notify clients about PHY removal. This patch removes the
possiblity to unbind Samsung Exynos PHY drivers in runtime.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-08-23 09:40:59 +05:30
Greg Kroah-Hartman
aa9083faa1 phy: for 5.3
*) Add a new PHY driver for Qualcomm PCIe2 PHY
   *) Add a new PHY driver for Mixel DPHY present in i.MX8
   *) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that
      PHY enable failed
   *) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to
      calling a sleeping function from invalid context
   *) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to
      imbalance powered flag
   *) Fix .cocci and sparse warnings
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEEUXMr/TfP2p4suIY5Dlx4XIBNgtkFAl0Z3rAOHGtpc2hvbkB0
 aS5jb20ACgkQDlx4XIBNgtlvxBAAppuQXXioXA4+HSwhTTTGOfGwR4C9J+fLpfzH
 7uzFCTIG/nJnGWDyI5c093XXvvnPggh2zkRRAoy2iGDUmOtFJX3olOmDnmsyYtPW
 gMOArOCaIuTu9kDUmkes9N19QvkC11y4rQKvtbR+HhpQa96ucOaeDDMuedWlnqmB
 EeDN8tzhPSDdkkkuHnrJCfL4Mp6ZNFdTxZcEaU2vnx9pra3xq0Q7b90mm3Iyzy6E
 cTuQqWr9sClFMmL1cCZwfQlRHTFIeh2+/kBzycOnLUCsF6gQ7IVVYNyIu44qlmCM
 B0dtlvkB/z4qPj6kTh/2P6cMxf3sd8ZmW/cCXTPacpHio4gO9shRXp+yFamMC05i
 +yoL3pCQyp0t+1NjNal1N7jVEHmB+MwBhlQNiqwCYxEtBeTNMh/wVPr7cXHfO19a
 DrSUkrB0n5nYhv1adWCNEmzx4/ZA48j7hDLIVY/PFDddn1czz+5Lw6X+XR46o1tt
 qe6PodUa5nRPKoVXVnfA/0jHrjU9x4fE4OSxpBo7MbbQxWoU8LwibDuWMdWaooc9
 JlJBaTDPv4yXQg1EvHLvRvp/7S/dNRTKZgcY6E0YDYWH8ki+v3gRm5wP8eVlbGG5
 WKpChsxj6d53TdFnGs0Ngi3FOdqBHE8RXWXd0mCoDTh5SLgoF6eWmGwBr02rdX7x
 uNJTVGo=
 =5mPE
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

phy: for 5.3

  *) Add a new PHY driver for Qualcomm PCIe2 PHY
  *) Add a new PHY driver for Mixel DPHY present in i.MX8
  *) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that
     PHY enable failed
  *) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to
     calling a sleeping function from invalid context
  *) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to
     imbalance powered flag
  *) Fix .cocci and sparse warnings

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy:
  phy: qcom-qmp: Raise qcom_qmp_phy_enable() polling delay
  phy: meson-g12a-usb3-pcie: disable locking for cr_regmap
  phy: Add driver for mixel mipi dphy found on NXP's i.MX8 SoCs
  dt-bindings: phy: Add documentation for mixel dphy
  dt-bindings: phy-pxa-usb: add bindings
  phy: renesas: rcar-gen3-usb2: fix imbalance powered flag
  phy: qcom-qmp: Drop useless msm8998_pciephy_cfg setting
  phy: qcom-qmp: Correct READY_STATUS poll break condition
  phy: ti: am654-serdes: Make serdes_am654_xlate() static
  phy: usb: phy-brcm-usb: Fix platform_no_drv_owner.cocci warnings
  phy: samsung: Use struct_size() in devm_kzalloc()
  phy: qcom: Add Qualcomm PCIe2 PHY driver
  dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY
2019-07-01 15:04:59 +02:00
Gustavo A. R. Silva
c886ec0256 phy: samsung: Use struct_size() in devm_kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct samsung_usb2_phy_driver {
	...
        struct samsung_usb2_phy_instance instances[0];
};

instance = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) +
			count * sizeof(struct samsung_usb2_phy_instance),
			GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = devm_kzalloc(dev, struct_size(instance, instances, count),
			GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-06-20 14:13:57 +05:30
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Sylwester Nawrocki
af09a5e926 phy: exynos-mipi-video: Simplify code by using regmap_update_bits()
There is no functional change, just replacing regmap_read()/modify/
regmap_write() with regmap_update_bits() function calls.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-25 10:52:59 +05:30
Ulf Magnusson
fee7e1d50c phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB
Exynos4212 support was removed by commit bca9085e0a ("ARM: dts:
exynos: remove Exynos4212 support (dead code)").

Remove the SOC_EXYNOS4212 dependency from PHY_EXYNOS4X12_USB.

Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-08 13:56:21 +05:30
Vivek Gautam
d8c80bb3b5 phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800
Adding phy calibration sequence for USB 3.0 DRD PHY present on
Exynos5420/5800 systems.
This calibration facilitates setting certain PHY parameters viz.
the Loss-of-Signal (LOS) Detector Threshold Level, as well as
Tx-Vboost-Level for Super-Speed operations.
Additionally we also set proper time to wait for RxDetect measurement,
for desired PHY reference clock, so as to solve issue with enumeration
of few USB 3.0 devices, like Samsung SUM-TSB16S 3.0 USB drive
on the controller.

We are using CR_port for this purpose to send required data
to override the LOS values.

On testing with USB 3.0 devices on USB 3.0 port present on
SMDK5420, and peach-pit boards should see following message:
usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd

and without this patch, should see below shown message:
usb 1-1: new high-speed USB device number 2 using xhci-hcd

[Also removed unnecessary extra lines in the register macro definitions]

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
[adapted to use phy_calibrate as entry point]
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-12-29 13:00:35 +05:30
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Chunfeng Yun
e0ed408260 phy: samsung: use of_device_get_match_data()
reduce the boilerplate code to get the specific data

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-20 13:59:52 +05:30
Vivek Gautam
0b56e9a7e8 phy: Group vendor specific phy drivers
Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Also updated the MAINTAINERS file to reflect the correct
directory structure for phy drivers.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01 15:28:33 +05:30