Previously any PMU overflow interrupt that fired while a VCPU was
loaded was recorded as a guest event whether it truly was or not. This
resulted in nonsense perf recordings that did not honor
perf_event_attr.exclude_guest and recorded guest IPs where it should
have recorded host IPs.
Rework the sampling logic to only record guest samples for events with
exclude_guest = 0. This way any host-only events with exclude_guest
set will never see unexpected guest samples. The behaviour of events
with exclude_guest = 0 is unchanged.
Note that events configured to sample both host and guest may still
misattribute a PMI that arrived in the host as a guest event depending
on KVM arch and vendor behavior.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-6-coltonlewis@google.com
Break the assignment logic for misc flags into their own respective
functions to reduce the complexity of the nested logic.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-5-coltonlewis@google.com
Make sure PowerPC uses the arch-specific function now that those have
been reorganized.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-4-coltonlewis@google.com
For clarity, rename the arch-specific definitions of these functions
to perf_arch_* to denote they are arch-specifc. Define the
generic-named functions in one place where they can call the
arch-specific ones as needed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com
For ARM's implementation, perf_instruction_pointer() and
perf_misc_flags() are equivalent to the generic versions in
include/linux/perf_event.h so arch/arm doesn't need to provide its
own versions. Drop them here.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-2-coltonlewis@google.com
On x86_64, with allmodconfig, struct uprobe_task is 72 bytes long, with a
hole and some padding.
/* size: 72, cachelines: 2, members: 7 */
/* sum members: 64, holes: 1, sum holes: 4 */
/* padding: 4 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 4 */
/* last cacheline: 8 bytes */
Reorder the structure to fill the hole and avoid the padding.
This way, the whole structure fits in a single cacheline and some memory is
saved when it is allocated.
/* size: 64, cachelines: 1, members: 7 */
/* forced alignments: 1 */
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/a9f541d0cedf421f765c77a1fb93d6a979778a88.1730495562.git.christophe.jaillet@wanadoo.fr
Fix the following warning:
CC [M] arch/x86/events/amd/uncore.o
arch/x86/events/amd/uncore.c: In function ‘amd_uncore_umc_ctx_init’:
arch/x86/events/amd/uncore.c:951:52: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=]
snprintf(pmu->name, sizeof(pmu->name), "amd_umc_%d", index);
^~
arch/x86/events/amd/uncore.c:951:43: note: directive argument in the range [0, 2147483647]
snprintf(pmu->name, sizeof(pmu->name), "amd_umc_%d", index);
^~~~~~~~~~~~
arch/x86/events/amd/uncore.c:951:4: note: ‘snprintf’ output between 10 and 19 bytes into a destination of size 16
snprintf(pmu->name, sizeof(pmu->name), "amd_umc_%d", index);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As far as I can see, there can't be more than UNCORE_GROUP_MAX (256)
groups and each group can't have more than 255 PMU, so the number
printed by this %d can't exceed 65279, that's only 5 digits and would
fit into the buffer. So it's a false positive warning. But we can
make the compiler happy by declaring index as a 16-bit number.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20241105095253.18f34b4d@endymion.delvare
Events with aux actions or aux sampling expect the PMI to coincide with the
event, which does not happen for large PEBS, so do not enable large PEBS in
that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20241022155920.17511-5-adrian.hunter@intel.com
Prevent tracing to start if aux_paused.
Implement support for PERF_EF_PAUSE / PERF_EF_RESUME. When aux_paused, stop
tracing. When not aux_paused, only start tracing if it isn't currently
meant to be stopped.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20241022155920.17511-4-adrian.hunter@intel.com
Hardware traces, such as instruction traces, can produce a vast amount of
trace data, so being able to reduce tracing to more specific circumstances
can be useful.
The ability to pause or resume tracing when another event happens, can do
that.
Add ability for an event to "pause" or "resume" AUX area tracing.
Add aux_pause bit to perf_event_attr to indicate that, if the event
happens, the associated AUX area tracing should be paused. Ditto
aux_resume. Do not allow aux_pause and aux_resume to be set together.
Add aux_start_paused bit to perf_event_attr to indicate to an AUX area
event that it should start in a "paused" state.
Add aux_paused to struct hw_perf_event for AUX area events to keep track of
the "paused" state. aux_paused is initialized to aux_start_paused.
Add PERF_EF_PAUSE and PERF_EF_RESUME modes for ->stop() and ->start()
callbacks. Call as needed, during __perf_event_output(). Add
aux_in_pause_resume to struct perf_buffer to prevent races with the NMI
handler. Pause/resume in NMI context will miss out if it coincides with
another pause/resume.
To use aux_pause or aux_resume, an event must be in a group with the AUX
area event as the group leader.
Example (requires Intel PT and tools patches also):
$ perf record --kcore -e intel_pt/aux-action=start-paused/k,syscalls:sys_enter_newuname/aux-action=resume/,syscalls:sys_exit_newuname/aux-action=pause/ uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.043 MB perf.data ]
$ perf script --call-trace
uname 30805 [000] 24001.058782799: name: 0x7ffc9c1865b0
uname 30805 [000] 24001.058784424: psb offs: 0
uname 30805 [000] 24001.058784424: cbr: 39 freq: 3904 MHz (139%)
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __x64_sys_newuname
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) down_read
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __cond_resched
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) in_lock_functions
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_sub
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) up_read
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) in_lock_functions
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) preempt_count_sub
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) _copy_to_user
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_to_user_mode
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_work
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) perf_syscall_exit
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_alloc
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_get_recursion_context
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_tp_event
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_update
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) tracing_gen_ctx_irq_test
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_event
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __perf_event_account_interrupt
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __this_cpu_preempt_check
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_output_forward
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_aux_pause
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) ring_buffer_get
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_lock
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_unlock
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) pt_event_stop
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) native_write_msr
uname 30805 [000] 24001.058785463: ([kernel.kallsyms]) native_write_msr
uname 30805 [000] 24001.058785639: 0x0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20241022155920.17511-3-adrian.hunter@intel.com
If the trace data buffer becomes full, a truncated flag [T] is reported
in PERF_RECORD_AUX. In some cases, the size reported is 0, even though
data must have been added to make the buffer full.
That happens when the buffer fills up from empty to full before the
Intel PT driver has updated the buffer position. Then the driver
calculates the new buffer position before calculating the data size.
If the old and new positions are the same, the data size is reported
as 0, even though it is really the whole buffer size.
Fix by detecting when the buffer position is wrapped, and adjust the
data size calculation accordingly.
Example
Use a very small buffer size (8K) and observe the size of truncated [T]
data. Before the fix, it is possible to see records of 0 size.
Before:
$ perf record -m,8K -e intel_pt// uname
Linux
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.105 MB perf.data ]
$ perf script -D --no-itrace | grep AUX | grep -F '[T]'
Warning:
AUX data lost 2 times out of 3!
5 19462712368111 0x19710 [0x40]: PERF_RECORD_AUX offset: 0 size: 0 flags: 0x1 [T]
5 19462712700046 0x19ba8 [0x40]: PERF_RECORD_AUX offset: 0x170 size: 0xe90 flags: 0x1 [T]
After:
$ perf record -m,8K -e intel_pt// uname
Linux
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.040 MB perf.data ]
$ perf script -D --no-itrace | grep AUX | grep -F '[T]'
Warning:
AUX data lost 2 times out of 3!
1 113720802995 0x4948 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x2000 flags: 0x1 [T]
1 113720979812 0x6b10 [0x40]: PERF_RECORD_AUX offset: 0x2000 size: 0x2000 flags: 0x1 [T]
Fixes: 52ca9ced3f ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241022155920.17511-2-adrian.hunter@intel.com
Avoid taking refcount on uprobe in prepare_uretprobe(), instead take
uretprobe-specific SRCU lock and keep it active as kernel transfers
control back to user space.
Given we can't rely on user space returning from traced function within
reasonable time period, we need to make sure not to keep SRCU lock
active for too long, though. To that effect, we employ a timer callback
which is meant to terminate SRCU lock region after predefined timeout
(currently set to 100ms), and instead transfer underlying struct
uprobe's lifetime protection to refcounting.
This fallback to less scalable refcounting after 100ms is a fine
tradeoff from uretprobe's scalability and performance perspective,
because uretprobing *long running* user functions inherently doesn't run
into scalability issues (there is just not enough frequency to cause
noticeable issues with either performance or scalability).
The overall trick is in ensuring synchronization between current thread
and timer's callback fired on some other thread. To cope with that with
minimal logic complications, we add hprobe wrapper which is used to
contain all the synchronization related issues behind a small number of
basic helpers: hprobe_expire() for "downgrading" uprobe from SRCU-protected
state to refcounted state, and a hprobe_consume() and hprobe_finalize()
pair of single-use consuming helpers. Other than that, whatever current
thread's logic is there stays the same, as timer thread cannot modify
return_instance state (or add new/remove old return_instances). It only
takes care of SRCU unlock and uprobe refcounting, which is hidden from
the higher-level uretprobe handling logic.
We use atomic xchg() in hprobe_consume(), which is called from
performance critical handle_uretprobe_chain() function run in the
current context. When uncontended, this xchg() doesn't seem to hurt
performance as there are no other competing CPUs fighting for the same
cache line. We also mark struct return_instance as ____cacheline_aligned
to ensure no false sharing can happen.
Another technical moment. We need to make sure that the list of return
instances can be safely traversed under RCU from timer callback, so we
delay return_instance freeing with kfree_rcu() and make sure that list
modifications use RCU-aware operations.
Also, given SRCU lock survives transition from kernel to user space and
back we need to use lower-level __srcu_read_lock() and
__srcu_read_unlock() to avoid lockdep complaining.
Just to give an impression of a kind of performance improvements this
change brings, below are benchmarking results with and without these
SRCU changes, assuming other uprobe optimizations (mainly RCU Tasks
Trace for entry uprobes, lockless RB-tree lookup, and lockless VMA to
uprobe lookup) are left intact:
WITHOUT SRCU for uretprobes
===========================
uretprobe-nop ( 1 cpus): 2.197 ± 0.002M/s ( 2.197M/s/cpu)
uretprobe-nop ( 2 cpus): 3.325 ± 0.001M/s ( 1.662M/s/cpu)
uretprobe-nop ( 3 cpus): 4.129 ± 0.002M/s ( 1.376M/s/cpu)
uretprobe-nop ( 4 cpus): 6.180 ± 0.003M/s ( 1.545M/s/cpu)
uretprobe-nop ( 8 cpus): 7.323 ± 0.005M/s ( 0.915M/s/cpu)
uretprobe-nop (16 cpus): 6.943 ± 0.005M/s ( 0.434M/s/cpu)
uretprobe-nop (32 cpus): 5.931 ± 0.014M/s ( 0.185M/s/cpu)
uretprobe-nop (64 cpus): 5.145 ± 0.003M/s ( 0.080M/s/cpu)
uretprobe-nop (80 cpus): 4.925 ± 0.005M/s ( 0.062M/s/cpu)
WITH SRCU for uretprobes
========================
uretprobe-nop ( 1 cpus): 1.968 ± 0.001M/s ( 1.968M/s/cpu)
uretprobe-nop ( 2 cpus): 3.739 ± 0.003M/s ( 1.869M/s/cpu)
uretprobe-nop ( 3 cpus): 5.616 ± 0.003M/s ( 1.872M/s/cpu)
uretprobe-nop ( 4 cpus): 7.286 ± 0.002M/s ( 1.822M/s/cpu)
uretprobe-nop ( 8 cpus): 13.657 ± 0.007M/s ( 1.707M/s/cpu)
uretprobe-nop (32 cpus): 45.305 ± 0.066M/s ( 1.416M/s/cpu)
uretprobe-nop (64 cpus): 42.390 ± 0.922M/s ( 0.662M/s/cpu)
uretprobe-nop (80 cpus): 47.554 ± 2.411M/s ( 0.594M/s/cpu)
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241024044159.3156646-3-andrii@kernel.org
Currently put_uprobe() might trigger mutex_lock()/mutex_unlock(), which
makes it unsuitable to be called from more restricted context like softirq.
Let's make put_uprobe() agnostic to the context in which it is called,
and use work queue to defer the mutex-protected clean up steps.
RB tree removal step is also moved into work-deferred callback to avoid
potential deadlock between softirq-based timer callback, added in the
next patch, and the rest of uprobe code.
We can rework locking altogher as a follow up, but that's significantly
more tricky, so warrants its own patch set. For now, we need to make
sure that changes in the next patch that add timer thread work correctly
with existing approach, while concentrating on SRCU + timeout logic.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241024044159.3156646-2-andrii@kernel.org
The rapl pmu is die scope, which is supported by the generic perf_event
subsystem now.
Set the scope for the rapl PMU and remove all the cpumask and hotplug
codes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241010142604.770192-2-kan.liang@linux.intel.com
There are extra codes in the CPU hotplug function to allocate rapl pmus.
The generic PMU hotplug support is hard to be applied.
As long as the rapl pmus can be allocated upfront for each die/socket,
the code doesn't need to be implemented in the CPU hotplug function.
Move the code to the init_rapl_pmus(), and allocate a PMU for each
possible die/socket.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Link: https://lore.kernel.org/r/20241010142604.770192-1-kan.liang@linux.intel.com
This change allows the uprobe consumer to behave as session which
means that 'handler' and 'ret_handler' callbacks are connected in
a way that allows to:
- control execution of 'ret_handler' from 'handler' callback
- share data between 'handler' and 'ret_handler' callbacks
The session concept fits to our common use case where we do filtering
on entry uprobe and based on the result we decide to run the return
uprobe (or not).
It's also convenient to share the data between session callbacks.
To achive this we are adding new return value the uprobe consumer
can return from 'handler' callback:
UPROBE_HANDLER_IGNORE
- Ignore 'ret_handler' callback for this consumer.
And store cookie and pass it to 'ret_handler' when consumer has both
'handler' and 'ret_handler' callbacks defined.
We store shared data in the return_consumer object array as part of
the return_instance object. This way the handle_uretprobe_chain can
find related return_consumer and its shared data.
We also store entry handler return value, for cases when there are
multiple consumers on single uprobe and some of them are ignored and
some of them not, in which case the return probe gets installed and
we need to have a way to find out which consumer needs to be ignored.
The tricky part is when consumer is registered 'after' the uprobe
entry handler is hit. In such case this consumer's 'ret_handler' gets
executed as well, but it won't have the proper data pointer set,
so we can filter it out.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241018202252.693462-3-jolsa@kernel.org
Adding data pointer to both entry and exit consumer handlers and all
its users. The functionality itself is coming in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241018202252.693462-2-jolsa@kernel.org
Warning at every leaking bits can cause a flood of message, triggering
various stall-warning mechanisms to fire, including CSD locks, which
makes the machine to be unusable.
Track the bits that are being leaked, and only warn when a new bit is
set.
That said, this patch will help with the following issues:
1) It will tell us which bits are being set, so, it is easy to
communicate it back to vendor, and to do a root-cause analyzes.
2) It avoid the machine to be unusable, because, worst case
scenario, the user gets less than 60 WARNs (one per unhandled bit).
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20241001141020.2620361-1-leitao@debian.org
Add the new helper, xol_get_slot_nr() which does
find_first_zero_bit() + test_and_set_bit().
xol_take_insn_slot() can wait for the "xol_get_slot_nr() < UINSNS_PER_PAGE"
event instead of "area->slot_count < UINSNS_PER_PAGE".
So we can kill area->slot_count and avoid atomic_inc() + atomic_dec(), this
simplifies the code and can slightly improve the performance.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241001142458.GA13629@redhat.com
kernel/events/uprobes.c assumes that xol_area->vaddr is always correct but
a malicious application can remap its "[uprobes]" vma to another adress to
confuse the kernel. Introduce xol_mremap() to make this impossible.
With this change utask->xol_vaddr in xol_free_insn_slot() can't be invalid,
we can turn the offset check into WARN_ON_ONCE(offset >= PAGE_SIZE).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240929144258.GA9492@redhat.com
Add the "struct uprobe_task *utask" argument to xol_get_insn_slot() and
xol_free_insn_slot(), their callers already have it so we can avoid the
unnecessary dereference and simplify the code.
Kill the "tsk" argument of xol_free_insn_slot(), it is always current.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240929144253.GA9487@redhat.com
This simplifies the code and makes xol_get_insn_slot() symmetric with
xol_free_insn_slot() which clears utask->xol_vaddr.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240929144248.GA9483@redhat.com
The do / while (slot_nr >= UINSNS_PER_PAGE) loop in xol_take_insn_slot()
makes no sense, the checked condition is always true. Change this code
to use the "for (;;)" loop, this way we do not need to change slot_nr if
test_and_set_bit() fails.
Also, kill the unnecessary xol_vaddr != NULL check in xol_get_insn_slot(),
xol_take_insn_slot() never returns NULL.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240929144244.GA9480@redhat.com
If pre_ssout() succeeds and sets utask->active_uprobe and utask->xol_vaddr
the task must not exit until it calls handle_singlestep() which does the
necessary put_uprobe() and xol_free_insn_slot().
Remove put_uprobe() and xol_free_insn_slot() from uprobe_free_utask(). With
this change xol_free_insn_slot() can't hit xol_area/utask/xol_vaddr == NULL,
we can kill the unnecessary checks checks and simplify this function more.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240929144239.GA9475@redhat.com
1. Clear utask->xol_vaddr unconditionally, even if this addr is not valid,
xol_free_insn_slot() should never return with utask->xol_vaddr != NULL.
2. Add a comment to explain why do we need to validate slot_addr.
3. Simplify the validation above. We can simply check offset < PAGE_SIZE,
unsigned underflows are fine, it should work if slot_addr < area->vaddr.
4. Kill the unnecessary "slot_nr >= UINSNS_PER_PAGE" check, slot_nr must
be valid if offset < PAGE_SIZE.
The next patches will cleanup this function even more.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240929144235.GA9471@redhat.com
handle_swbp() calls get_utask() before prepare_uretprobe() or pre_ssout()
can be called, they can simply use current->utask which can't be NULL.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240929144230.GA9468@redhat.com
ArrowLake-H contains 3 different uarchs, LionCove, Skymont and Crestmont.
It is different with previous hybrid processors which only contains two
kinds of uarchs.
This patch adds PMU support for ArrowLake-H processor, adds ARL-H
specific events which supports the 3 kinds of uarchs, such as
td_retiring_arl_h, and extends some existed format attributes like
offcore_rsp to make them be available to support ARL-H as well. Althrough
these format attributes like offcore_rsp have been extended to support
ARL-H, they can still support the regular hybrid platforms with 2 kinds
of uarchs since the helper hybrid_format_is_visible() would filter PMU
types and only show the format attribute for available PMUs.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lkml.kernel.org/r/20240820073853.1974746-5-dapeng1.mi@linux.intel.com
The upcoming ARL-H hybrid processor contains 2 different atom uarchs
which have different PMU capabilities. To distinguish these atom uarchs,
CPUID.1AH.EAX[23:0] defines a native model ID which can be used to
uniquely identify the uarch of the core by combining with core type.
Thus a 3rd hybrid pmu type "hybrid_tiny" is defined to mark the 2nd
atom uarch. The helper find_hybrid_pmu_for_cpu() would compare the
hybrid pmu type and dynamically read core native id from cpu to identify
the corresponding hybrid pmu structure.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lkml.kernel.org/r/20240820073853.1974746-4-dapeng1.mi@linux.intel.com
Define helper get_this_hybrid_cpu_native_id() to return the CPU core
native ID. This core native ID combining with core type can be used to
figure out the CPU core uarch uniquely.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lkml.kernel.org/r/20240820073853.1974746-3-dapeng1.mi@linux.intel.com
Use macros instead of magic number to define hybrid_pmu_type and remove
X86_HYBRID_NUM_PMUS since it's never used.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lkml.kernel.org/r/20240820073853.1974746-2-dapeng1.mi@linux.intel.com
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
-----BEGIN PGP SIGNATURE-----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=1a8G
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Highlights:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
The following is an automated git shortlog grouped by driver:
ISST:
- Add Diamond Rapids to support list
- Fix the KASAN report slab-out-of-bounds bug
MAINTAINERS:
- Update Intel In Field Scan(IFS) entry
dell-ddv:
- Fix typo in documentation
dell-laptop:
- Do not fail when encountering unsupported batteries
dell-sysman:
- add support for alienware products
intel/pmc:
- Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86/intel:
- power-domains: Add Diamond Rapids support
wmi:
- Update WMI driver API documentation
x86-android-tablets:
- Fix use after free on platform_device_register() errors
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmcCbogUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xFEgf/UYsNHFO5P5IVwWIoXzyFgRNg8zQU
trABCxfCZztZOEwRVJKZ0lVLbkKULdBJE4Tj7RwhZiCubcupV5LJT5OLe5R+AFGK
qhG2FTo9uHacwEXPMZyBAnj+aW6sSnVATAQgBZFnZ0SdInuOjlAmMvAL48MfNnEO
Nw7EiGtAvkl7R9XHBsF7vs6EFewjy+ZFMoslZq90UUhfK51DCu74w7hv8vY5oG50
pstbW3aqn5nmCKcPhQNW7ZmG6ukpdKkl74u1hdW6JRuBruFrZWR6px1xax6+Q/Is
/ib4x69irCN+sBTX7fGTPNsO+Oaq0GmUfeiGdcZA2SjmIJ8P4yvPAuNBbw==
=Nfjz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
* Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
* Make sure that the host's vector length is at capped by a value
common to all CPUs
* Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
* Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
* Fix compilation with KVM_INTEL=KVM_AMD=n
* Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
* Fix compilation on non-x86 architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcCRMgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNIgf/T80+VxFy7eP1yTkZy9nd3UjSsAeT
fWvYMyN2isOTWTVbl3ckjMZc4i7L/nOngxfkLzI3OfFUO8TI8cw11hNFn85m+WKM
95DVgEaqz1kuJg25VjSj9AySvPFDNec8bV37C2vk2jF4YsGo6qBugSSjktZUgGiW
ozsdV39lcVcLf+x8/52Vc2eb736nrrYg8QaFP0tEQs9MHuYob/XBw3Zx42dJoZYl
tCjGP5oW7EvUdRD48GkgXP9DWA12QmDxNOHEmUdxWamsK88YQXFyWwb7uwV5x+hd
mO3bJaYInkJsh3D2e5QARswQb+D5HMVYFwvEkxQF/wvmcMosRVz4vv65Sw==
=P4uw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
- Allow r30 to be used in vDSO code generation of getrandom.
Thanks to: Jason A. Donenfeld.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZwIxiwAKCRAF0oADX8se
IbuQAQCzv/PrtxVkqQja5cTZeC/rrV4M1jIKsLpYe1voX3mDSAEA5NTime3l5VXm
SdsiFUBVa4fzp8Ipu9r98wVEGtm/SQw=
=ARIU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba97 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba014120 ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f26 ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760d ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d0 ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346
Cc: Marek Maslanka <mmaslanka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68 ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
-----BEGIN PGP SIGNATURE-----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=Rtrz
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
