cs.base is declared as a __u64 variable and vector is a u32 so this
causes a static checker warning. The user indeed can set "sipi_vector"
to any u32 value in kvm_vcpu_ioctl_x86_set_vcpu_events(), but the
value should really have 8-bit precision only.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new header, and hide the device assignment functions there.
Move struct kvm_assigned_dev_kernel to assigned-dev.c by modifying
arch/x86/kvm/iommu.c to take a PCI device struct.
Based on a patch by Radim Krcmar <rkrcmark@redhat.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This feature is not supported inside KVM guests yet, because we do not emulate
MSR_IA32_XSS. Mask it out.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that ia64 is gone, we can hide deprecated device assignment in x86.
Notable changes:
- kvm_vm_ioctl_assigned_device() was moved to x86/kvm_arch_vm_ioctl()
The easy parts were removed from generic kvm code, remaining
- kvm_iommu_(un)map_pages() would require new code to be moved
- struct kvm_assigned_dev_kernel depends on struct kvm_irq_ack_notifier
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ia64 does not need them anymore. Ack notifiers become x86-specific
too.
Suggested-by: Gleb Natapov <gleb@kernel.org>
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM for ia64 has been marked as broken not just once, but twice even,
and the last patch from the maintainer is now roughly 5 years old.
Time for it to rest in peace.
Acked-by: Gleb Natapov <gleb@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove FIXME comments about needing fault addresses to be returned. These
are propaagated from walk_addr_generic to gva_to_gpa and from there to
ops->read_std and ops->write_std.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check on the higher limit of the segment, and the check on the
maximum accessible size, is the same for both expand-up and
expand-down segments. Only the computation of "lim" varies.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register_address has been a duplicate of address_mask ever since the
ancestor of __linearize was born in 90de84f50b (KVM: x86 emulator:
preserve an operand's segment identity, 2010-11-17).
However, we can put it to a better use by including the call to reg_read
in register_address. Similarly, the call to reg_rmw can be moved to
register_address_increment.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In __linearize there is check of the condition whether to check if masking of
the linear address is needed. It occurs immediately after switch that
evaluates the same condition. Merge them.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SS is used using a non-canonical address, an #SS exception is generated on
real hardware. KVM emulator causes a #GP instead. Fix it to behave as real x86
CPU.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If branch (e.g., jmp, ret) causes limit violations, since the target IP >
limit, the #GP exception occurs before the branch. In other words, the RIP
pushed on the stack should be that of the branch and not that of the target.
To do so, we can call __linearize, with new EIP, which also saves us the code
which performs the canonical address checks. On the case of assigning an EIP >=
2^32 (when switching cs.l), we also safe, as __linearize will check the new EIP
does not exceed the limit and would trigger #GP(0) otherwise.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When segment is accessed, real hardware does not perform any privilege level
checks. In contrast, KVM emulator does. This causes some discrepencies from
real hardware. For instance, reading from readable code segment may fail due to
incorrect segment checks. In addition, it introduces unnecassary overhead.
To reference Intel SDM 5.5 ("Privilege Levels"): "Privilege levels are checked
when the segment selector of a segment descriptor is loaded into a segment
register." The SDM never mentions privilege level checks during memory access,
except for loading far pointers in section 5.10 ("Pointer Validation"). Those
are actually segment selector loads and are emulated in the similarily (i.e.,
regardless to __linearize checks).
This behavior was also checked using sysexit. A data-segment whose DPL=0 was
loaded, and after sysexit (CPL=3) it is still accessible.
Therefore, all the privilege level checks in __linearize are removed.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When performing segmented-read/write in the emulator for stack operations, it
ignores the stack size, and uses the ad_bytes as indication for the pointer
size. As a result, a wrong address may be accessed.
To fix this behavior, we can remove the masking of address in __linearize and
perform it beforehand. It is already done for the operands (so currently it is
inefficiently done twice). It is missing in two cases:
1. When using rip_relative
2. On fetch_bit_operand that changes the address.
This patch masks the address on these two occassions, and removes the masking
from __linearize.
Note that it does not mask EIP during fetch. In protected/legacy mode code
fetch when RIP >= 2^32 should result in #GP and not wrap-around. Since we make
limit checks within __linearize, this is the expected behavior.
Partial revert of commit 518547b32a (KVM: x86: Emulator does not
calculate address correctly, 2014-09-30).
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 10e38fc7cab6 ("KVM: x86: Emulator flag for instruction that only support
16-bit addresses in real mode") introduced NoBigReal for instructions such as
MONITOR. Apparetnly, the Intel SDM description that led to this patch is
misleading. Since no instruction is using NoBigReal, it is safe to remove it,
we fully understand what the SDM means.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MMIO_MAX_GEN is the same as MMIO_GEN_MASK. Use only one.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead, just use PFERR_{FETCH, PRESENT, WRITE}_MASK
inside handle_ept_violation() for slightly better code.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
apic_find_highest_irr assumes irr_pending is set if any vector in APIC_IRR is
set. If this assumption is broken and apicv is disabled, the injection of
interrupts may be deferred until another interrupt is delivered to the guest.
Ultimately, if no other interrupt should be injected to that vCPU, the pending
interrupt may be lost.
commit 56cc2406d6 ("KVM: nVMX: fix "acknowledge interrupt on exit" when APICv
is in use") changed the behavior of apic_clear_irr so irr_pending is cleared
after setting APIC_IRR vector. After this commit, if apic_set_irr and
apic_clear_irr run simultaneously, a race may occur, resulting in APIC_IRR
vector set, and irr_pending cleared. In the following example, assume a single
vector is set in IRR prior to calling apic_clear_irr:
apic_set_irr apic_clear_irr
------------ --------------
apic->irr_pending = true;
apic_clear_vector(...);
vec = apic_search_irr(apic);
// => vec == -1
apic_set_vector(...);
apic->irr_pending = (vec != -1);
// => apic->irr_pending == false
Nonetheless, it appears the race might even occur prior to this commit:
apic_set_irr apic_clear_irr
------------ --------------
apic->irr_pending = true;
apic->irr_pending = false;
apic_clear_vector(...);
if (apic_search_irr(apic) != -1)
apic->irr_pending = true;
// => apic->irr_pending == false
apic_set_vector(...);
Fixing this issue by:
1. Restoring the previous behavior of apic_clear_irr: clear irr_pending, call
apic_clear_vector, and then if APIC_IRR is non-zero, set irr_pending.
2. On apic_set_irr: first call apic_set_vector, then set irr_pending.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Logical destination mode can be used to send NMI IPIs even when all
APICs are software disabled, so if all APICs are software disabled we
should still look at the DFRs.
So the DFRs should all be the same, even if some or all APICs are
software disabled. However, the SDM does not say this, so tweak
the logic as follows:
- if one APIC is enabled and has LDR != 0, use that one to build the map.
This picks the right DFR in case an OS is only setting it for the
software-enabled APICs, or in case an OS is using logical addressing
on some APICs while leaving the rest in reset state (using LDR was
suggested by Radim).
- if all APICs are disabled, pick a random one to build the map.
We use the last one with LDR != 0 for simplicity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the APIC logical map does not consider VCPUs whose local-apic is
software-disabled. However, NMIs, INIT, etc. should still be delivered to such
VCPUs. Therefore, the APIC mode should first be determined, and then the map,
considering all VCPUs should be constructed.
To address this issue, first find the APIC mode, and only then construct the
logical map.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the 3 private slots, this gives us 512 slots total.
Motivation for this is in addition to assigned devices
support more memory hotplug slots, where 1 slot is
used by a hotplugged memory stick.
It will allow to support upto 256 hotplug memory
slots and leave 253 slots for assigned devices and
other devices that use them.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running the tsc_adjust kvm-unit-test on an AMD processor with the
IA32_TSC_ADJUST feature enabled, the WARN_ON in svm_adjust_tsc_offset can be
triggered. This WARN_ON checks for a negative adjustment in case __scale_tsc
is called; however it may trigger unnecessary warnings.
This patch moves the WARN_ON to trigger only if __scale_tsc will actually be
called from svm_adjust_tsc_offset. In addition make adj in kvm_set_msr_common
s64 since this can have signed values.
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's nothing to switch if the host and guest values are the same.
I am unable to find evidence that this makes any difference
whatsoever.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
[I could see a difference on Nehalem. From 5 runs:
userspace exit, guest!=host 12200 11772 12130 12164 12327
userspace exit, guest=host 11983 11780 11920 11919 12040
lightweight exit, guest!=host 3214 3220 3238 3218 3337
lightweight exit, guest=host 3178 3193 3193 3187 3220
This passes the t-test with 99% confidence for userspace exit,
98.5% confidence for lightweight exit. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At least on Sandy Bridge, letting the CPU switch IA32_EFER is much
faster than switching it manually.
I benchmarked this using the vmexit kvm-unit-test (single run, but
GOAL multiplied by 5 to do more iterations):
Test Before After Change
cpuid 2000 1932 -3.40%
vmcall 1914 1817 -5.07%
mov_from_cr8 13 13 0.00%
mov_to_cr8 19 19 0.00%
inl_from_pmtimer 19164 10619 -44.59%
inl_from_qemu 15662 10302 -34.22%
inl_from_kernel 3916 3802 -2.91%
outl_to_kernel 2230 2194 -1.61%
mov_dr 172 176 2.33%
ipi (skipped) (skipped)
ipi+halt (skipped) (skipped)
ple-round-robin 13 13 0.00%
wr_tsc_adjust_msr 1920 1845 -3.91%
rd_tsc_adjust_msr 1892 1814 -4.12%
mmio-no-eventfd:pci-mem 16394 11165 -31.90%
mmio-wildcard-eventfd:pci-mem 4607 4645 0.82%
mmio-datamatch-eventfd:pci-mem 4601 4610 0.20%
portio-no-eventfd:pci-io 11507 7942 -30.98%
portio-wildcard-eventfd:pci-io 2239 2225 -0.63%
portio-datamatch-eventfd:pci-io 2250 2234 -0.71%
I haven't explicitly computed the significance of these numbers,
but this isn't subtle.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
[The results were reproducible on all of Nehalem, Sandy Bridge and
Ivy Bridge. The slowness of manual switching is because writing
to EFER with WRMSR triggers a TLB flush, even if the only bit you're
touching is SCE (so the page table format is not affected). Doing
the write as part of vmentry/vmexit, instead, does not flush the TLB,
probably because all processors that have EPT also have VPID. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCIDs are only supported in 64-bit mode. No need to clear bit 63
of CR3 unless the host is 64-bit.
Reported by Fengguang Wu's autobuilder.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new trace event records:
* the id of vcpu being updated
* the pvclock_vcpu_time_info struct being written to guest memory
This is useful for debugging pvclock bugs, such as the bug fixed by
"[PATCH] kvm: x86: Fix kvm clock versioning.".
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm updates the version number for the guest paravirt clock structure by
incrementing the version of its private copy. It does not read the guest
version, so will write version = 2 in the first update for every new VM,
including after restoring a saved state. If guest state is saved during
reading the clock, it could read and accept struct fields and guest TSC
from two different updates. This changes the code to increment the guest
version and write it back.
Signed-off-by: Owen Hofmann <osh@google.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 3b32004a66 ("KVM: x86: movnti minimum op size of 32-bit is not kept")
did not fully fix the minimum operand size of MONTI emulation. Still, MOVNTI
may be mistakenly performed using 16-bit opsize.
This patch add No16 flag to mark an instruction does not support 16-bits
operand size.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the guest writes to the TSC, the masterclock TSC copy must be
updated as well along with the TSC_OFFSET update, otherwise a negative
tsc_timestamp is calculated at kvm_guest_time_update.
Once "if (!vcpus_matched && ka->use_master_clock)" is simplified to
"if (ka->use_master_clock)", the corresponding "if (!ka->use_master_clock)"
becomes redundant, so remove the do_request boolean and collapse
everything into a single condition.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that KVM injects #UD on "unhandlable" error, it makes better sense to
return such error on sysenter instead of directly injecting #UD to the guest.
This allows to track more easily the unhandlable cases the emulator does not
support.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APIC base relocation is unsupported by KVM. If anyone uses it, the least should
be to report a warning in the hypervisor.
Note that KVM-unit-tests uses this feature for some reason, so running the
tests triggers the warning.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 7fe864dc94 (KVM: x86: Mark VEX-prefix instructions emulation as
unimplemented, 2014-06-02) marked VEX instructions as such in protected
mode. VEX-prefix instructions are not supported relevant on real-mode
and VM86, but should cause #UD instead of being decoded as LES/LDS.
Fix this behaviour to be consistent with real hardware.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
[Check for mod == 3, rather than 2 or 3. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Task-switch emulation checks the privilege level prior to performing the
task-switch. This check is incorrect in the case of task-gates, in which the
tss.dpl is ignored, and can cause superfluous exceptions. Moreover this check
is unnecassary, since the CPU checks the privilege levels prior to exiting.
Intel SDM 25.4.2 says "If CALL or JMP accesses a TSS descriptor directly
outside IA-32e mode, privilege levels are checked on the TSS descriptor" prior
to exiting. AMD 15.14.1 says "The intercept is checked before the task switch
takes place but after the incoming TSS and task gate (if one was involved) have
been checked for correctness."
This patch removes the CPL checks for CALL and JMP.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulating LTR/LDTR/LGDT/LIDT, #GP should be injected if the base is
non-canonical. Otherwise, VM-entry will fail.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LGDT and LIDT emulation logic is almost identical. Merge the logic into a
single point to avoid redundancy. This will be used by the next patch that
will ensure the bases of the loaded GDTR and IDTR are canonical.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the emulation ends in fault, eflags should not be updated. However, several
instruction emulations (actually all the fastops) currently update eflags, if
the fault was detected afterwards (e.g., #PF during writeback).
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Although Intel SDM mentions bit 63 is reserved, MOV to CR3 can have bit 63 set.
As Intel SDM states in section 4.10.4 "Invalidation of TLBs and
Paging-Structure Caches": " MOV to CR3. ... If CR4.PCIDE = 1 and bit 63 of the
instruction’s source operand is 0 ..."
In other words, bit 63 is not reserved. KVM emulator currently consider bit 63
as reserved. Fix it.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to Intel SDM push of segment selectors is done in the following
manner: "if the operand size is 32-bits, either a zero-extended value is pushed
on the stack or the segment selector is written on the stack using a 16-bit
move. For the last case, all recent Core and Atom processors perform a 16-bit
move, leaving the upper portion of the stack location unmodified."
This patch modifies the behavior to match the core behavior.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CMPS and SCAS instructions are evaluated in the wrong order. For reference (of
CMPS), see http://www.fermimn.gov.it/linux/quarta/x86/cmps.htm : "Note that the
direction of subtraction for CMPS is [SI] - [DI] or [ESI] - [EDI]. The left
operand (SI or ESI) is the source and the right operand (DI or EDI) is the
destination. This is the reverse of the usual Intel convention in which the
left operand is the destination and the right operand is the source."
Introducing em_cmp_r for this matter that performs comparison in reverse order
using fastop infrastructure to avoid a wrapper function.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYSCALL emulation currently clears in 64-bit mode eflags according to
MSR_SYSCALL_MASK. However, on bare-metal eflags[1] which is fixed to one
cannot be cleared, even if MSR_SYSCALL_MASK masks the bit. This wrong behavior
may result in failed VM-entry, as VT disallows entry with eflags[1] cleared.
This patch sets the bit after masking eflags on syscall.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In x86, you can only MOV-sreg to memory with either 16-bits or 64-bits size.
In contrast, KVM may write to 32-bits memory on MOV-sreg. This patch fixes KVM
behavior, and sets the destination operand size to two, if the destination is
memory.
When destination is registers, and the operand size is 32-bits, the high
16-bits in modern CPUs is filled with zero. This is handled correctly.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 debug registers hold a linear address. Therefore, breakpoints detection
should consider CS.base, and check whether instruction linear address equals
(CS.base + RIP). This patch introduces a function to evaluate RIP linear
address and uses it for breakpoints detection.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR6[0:3] (previous breakpoint indications) are cleared when #DB is injected
during handle_exception, just as real hardware does. Similarily, handle_dr
should clear DR6[0:3].
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Real-mode exceptions do not deliver error code. As can be seen in Intel SDM
volume 2, real-mode exceptions do not have parentheses, which indicate
error-code. To avoid significant changes of the code, the error code is
"removed" during exception queueing.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In one occassion, decode_modrm uses the rm field after it is extended with
REX.B to determine the addressing mode. Doing so causes it not to read the
offset for rip-relative addressing with REX.B=1.
This patch moves the fetch where we already mask REX.B away instead.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A bug was reported as follows: when running Windows 7 32-bit guests on qemu-kvm,
sometimes the guests run into blue screen during reboot. The problem was that a
guest's RVI was not cleared when it rebooted. This patch has fixed the problem.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Tested-by: Rongrong Liu <rongrongx.liu@intel.com>, Da Chun <ngugc@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return a negative error code instead, and WARN() when we should be covering
the entire 2-bit space of vmcs_field_type's return value. For increased
robustness, add a BUILD_BUG_ON checking the range of vmcs_field_to_offset.
Suggested-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of vmx_init(), actually it would make reasonable sense to do
anything specific to vmx hardware setting in vmx_x86_ops->hardware_setup().
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
