Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
to support multiple mesh devices later, we need to move global variables
like the queues into corresponding private structs bat_priv of the soft
devices.
Note that this patch still has a lot of FIXMEs and depends on the global
soft_device variable. This should be resolved later, e.g. by referencing
the parent soft device in batman_if.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Kernighan algorithm is not able to calculate the number of set bits
in parallel and the compiler cannot replace it with optimized
instructions.
The kernel provides specialised functions for each cpu which can either
use a software implementation or hardware instruction depending on the
target cpu.
Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Ethernet header is counted when transmitting a packet, so it should also
be counted when receiving a packet. With this patch, the rx_bytes and tx_bytes
statistics behave like an ordinary Ethernet interface.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Version 2010.1.0 of the extra kernel module was released and thus the
documentation should be updated and everything prepared for the the
upcoming patchset.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The changelog is only generated on standalone releases. Thus it has no
real value for the in-kernel version of batman-adv.
Reported-by: Abraham Arce <abraham.arce.moreno@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This reverts commit 96d592ed59.
The netfilter hook seems to be misused and may leak skbs in situations
when NF_HOOK returns NF_STOLEN. It may not filter everything as
expected. Also the ethernet bridge tables are not yet capable to
understand batman-adv packet correctly.
It was only added for testing purposes and can be removed again.
Reported-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the vb_util.c file that fixes many style
issues found by the checkpatch.pl tool.
- extra spaces
- invalid code indent
- extra braces
- invalid comment style
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the vb_init.c file that fixes many style
issues found by the checkpatch.pl tool.
- extra spaces
- invalid code indent
- extra braces
- invalid comment style
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the vb_setmode.c file that fixes many style
issues found by the checkpatch.pl tool.
- extra spaces
- invalid code indent
- extra braces
- invalid comment style
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the vb_ext.c file that fixes many style
issues found by the checkpatch.pl tool.
- extra spaces
- invalid code indent
- extra braces
- invalid comment style
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes a duplicate include directive in
drivers/staging/rtl8187se/ieee80211/ieee80211.h.
Signed-off-by: Andre Nogueira <andre.neo.net@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In wmi_bssInfo_event_rx, there is unneeded check for bss, because it
is in the branch where the bss is checked to be non-null already.
Remove the superfluous check.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[2nd version -- melded all three together]
1) There is a missing return or goto statement in one fail path in
sasem_probe, so that the code contiues its normal execution (and
unlocks a mutex twice). Fix that by jumping to the right place.
Anyway the code is very broken on its fail paths and there are many
leaks. But that's a different story.
2) There is an omitted unlock in one fail path in vfd_write, jump to
the right place to unlock the lock.
3) In the probe function, there is one more error where the lock is
not unlocked. Fix that by jumping to the proper place.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When 'context' allocation fails in imon_probe, we jump to unlock
context->ctx_lock. This is wrong as context is NULL and the lock is
not locked.
Fix the labels.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I don't know how gcc interprets this, but it wouldn't surprise me if it
choose something different than start-of-comment
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I've no idea where this came from!
Also fixed form -> from in comment
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
AR6003 is a single stream, SDIO based 802.11 chipset from
Atheros optimized for mobile and embedded devices. ath6kl is a
cfg80211 driver for AR6003 and supports both the station and
AP mode of operation.
Station mode supports 802.11 a/b/g/n with HT20 on 2.4/5GHz and
HT40 only on 5GHz. Some of the other features include WPA/WPA2,
WPS, WMM, WMM-PS, and BT coexistence. AP mode can be operated
only in b/g mode with support for a subset of features mentioned
above.
The driver supports cfg80211 but comes with its own set of
wext ioctls which have historically supported some of our
customers with features like BT 3.0 and AP mode of operation.
For further details, please refer to:
http://wireless.kernel.org/en/users/Drivers/ath6kl
The driver requires firmware that runs on the chip's network
processor. The majority of it is stored in ROM. The binaries
that are downloaded and executed from RAM are as follows:
1) Patch against the code in ROM for bug fixes and feature
enhancements.
2) Code to copy the data from the OTP region of the memory
into RAM.
3) Calibration file carrying board specific data.
The above files need to be present in the directory
'/lib/firmware/ath6k/AR6003/hw2.0/' for the driver to initialize
the chip upon enumeration. The files can be downloaded from the
link specified at the following location:
http://wireless.kernel.org/en/users/Drivers/ath6kl#Download
This driver is only provided in the interim while we work on
the mac80211 replacement, ath6k. Once the mac80211 driver
achieves feature parity with the ath6kl driver, the ath6kl will
be deprecated and removed from staging.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently, the user has to explicitly write a positive value to
initstate sysfs node before the device can be used. This event
triggers allocation of per-device metadata like memory pool,
table array and so on.
We do not pre-initialize all zram devices since the 'table' array,
mapping disk blocks to compressed chunks, takes considerable amount
of memory (8 bytes per page). So, pre-initializing all devices will
be quite wasteful if only few or none of the devices are actually
used.
This explicit device initialization from user is an odd requirement and
can be easily avoided. We now initialize the device when first write is
done to the device.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Creates per-device sysfs nodes in /sys/block/zram<id>/
Currently following stats are exported:
- disksize
- num_reads
- num_writes
- invalid_io
- zero_pages
- orig_data_size
- compr_data_size
- mem_used_total
By default, disksize is set to 0. So, to start using
a zram device, fist write a disksize value and then
initialize device by writing any positive value to
initstate. For example:
# initialize /dev/zram0 with 50MB disksize
echo 50*1024*1024 | bc > /sys/block/zram0/disksize
echo 1 > /sys/block/zram0/initstate
When done using a disk, issue reset to free its memory
by writing any positive value to reset node:
echo 1 > /sys/block/zram0/reset
This change also obviates the need for 'rzscontrol' utility.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The 1 element of the array is tested twice. Change the code so that the
remaining 3 element of the array is tested instead of testing the 1 element
a second time.
The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@expression@
expression E;
@@
(
* E
|| ... || E
|
* E
&& ... && E
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the solo6010-core.c file that fixes the assignments
in if condition style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The config name is wrong in drivers/staging/Makefile...
The object name is wrong in drivers/staging/mrst-touchscreen/Makefile...
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
the touch screen driver tries to find a range of free channels (which
are an array of bytes), by scanning for the "end of used channel" marker.
however it tries to be WAAAAY too smart and does 32 bit logic on 8 bit
quantities, and in the process completely gets it wrong
(repeatedly read the same register instead of incrementing in the loop,
assuming that if any of the 4 bytes in the 32 byte quantity is free,
all four are free, returning the channel number divided by 4 rather than
the actual first free channel number)
On the setting side, the same mistakes are made by and large; changed
this to just use the byte SCU write functions....
with these fixes we go from a completely non detected touchscreen to
something that appears to completely get detected.
(after also fixing the ordering issue that Jacobs patch should solve)
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In order to support multiple ST platform devices, a new symbol
'st_get_plat_device' earlier needed to be exported by the arch/XX/brd-XX.c
file which intends to add the ST platform device.
On removing this dependency, now inside ST driver maintain the array of
ST platform devices that would be registered.
As of now let id=0, as and when we end up having such platforms
where mutliple ST devices can exist, id would come from
protocol drivers (BT, FM and GPS) as to on which platform device
they want to register to.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the dt2817.c file that fixes up all coding style
issues found by the checkpatch.pl tool
Signed-off-by: Sunny Aujla <sunnyfedora99@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I have cleaned both files inside the iface directory (fileo rtmp_pci.h
and rtmp_usb.h). I am not sure about some of the changes I have made
however my adjustments have solved all errors. There were also a few
issues on my machine with ap.h on my machine, however I have since
cleaned that too.
Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Obviously the wrong spelling was copied a lot of times.
A similar patch for the non-staging part of linux
is committed by Jiri Kosina.
Cc: devel@driverdev.osuosl.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace C99-style comments with C89-style comments, fix some typos,
and fix whitespace to use only tabs.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
An error code is stored in a variable, but 0 is returned instead. Use the
variable instead of 0.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
local idexpression x;
constant C;
@@
if (...) { ...
x = -C
... when != x
(
return <+...x...+>;
|
return NULL;
|
return;
|
* return ...;
)
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the cx25821-audio-upstream.c and cx25821-audio.h
that fixes up a warnings found by checkpatch.pl tool.
Signed-off-by: Ilya Gorskin <Revent82@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
