Add a new testing topo bond_topo_2d1c.sh which is used more commonly.
Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the
extra link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The commit 14af9963ba ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes: c87c938f62 ("i40e: Add VF VLAN pruning")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM
requests. The bit resolution of this field is six bits. That bit five was
missing in the mask. This patch comes to correct the typo in the
IGC_PTM_CTRL_SHRT_CYC macro.
Fixes: a90ec84837 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230821171721.2203572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The automatic recalculation of the maximum allowed MTU is usually triggered
by code sections which are already rtnl lock protected by callers outside
of batman-adv. But when the fragmentation setting is changed via
batman-adv's own batadv genl family, then the rtnl lock is not yet taken.
But dev_set_mtu requires that the caller holds the rtnl lock because it
uses netdevice notifiers. And this code will then fail the check for this
lock:
RTNL: assertion failed at net/core/dev.c (1953)
Cc: stable@vger.kernel.org
Reported-by: syzbot+f8812454d9b3ac00d282@syzkaller.appspotmail.com
Fixes: c6a953cce8 ("batman-adv: Trigger events for auto adjusted MTU")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821-batadv-missing-mtu-rtnl-lock-v1-1-1c5a7bfe861e@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-21 (ice)
This series contains updates to ice driver only.
Jesse fixes an issue on calculating buffer size.
Petr Oros reverts a commit that does not fully resolve VF reset issues
and implements one that provides a fuller fix.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix NULL pointer deref during VF reset
Revert "ice: Fix ice VF reset during iavf initialization"
ice: fix receive buffer size miscalculation
====================
Link: https://lore.kernel.org/r/20230821171633.2203505-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oliver Hartkopp says:
====================
CAN fixes for 6.5-rc7
The isotp fix removes an unnecessary check which leads to delays and/or
a wrong error notification.
The fix for the CAN_RAW socket solves the last issue that has been
introduced with commit ee8b94c851 ("can: raw: fix receiver memory leak")
in this upstream cycle (detected by Eric Dumazet).
====================
Link: https://lore.kernel.org/r/20230821144547.6658-1-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ee8b94c851 ("can: raw: fix receiver memory leak") introduced
a new reference to the CAN netdevice that has assigned CAN filters.
But this new ro->dev reference did not maintain its own refcount which
lead to another KASAN use-after-free splat found by Eric Dumazet.
This patch ensures a proper refcount for the CAN nedevice.
Fixes: ee8b94c851 ("can: raw: fix receiver memory leak")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20230821144547.6658-3-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original implementation had a very simple handling for single frame
transmissions as it just sent the single frame without a timeout handling.
With the new echo frame handling the echo frame was also introduced for
single frames but the former exception ('simple without timers') has been
maintained by accident. This leads to a 1 second timeout when closing the
socket and to an -ECOMM error when CAN_ISOTP_WAIT_TX_DONE is selected.
As the echo handling is always active (also for single frames) remove the
wrong extra condition for single frames.
Fixes: 9f39d36530 ("can: isotp: add support for transmission without flow control")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20230821144547.6658-2-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While injecting PCIe errors to the upstream PCIe switch of
a BCM57810 NIC, system hangs/crashes were observed.
After several calls to bnx2x_tx_timout() complete,
bnx2x_nic_unload() is called to free up HW resources
and bnx2x_napi_disable() is called to release NAPI objects.
Later, when the EEH driver calls bnx2x_io_slot_reset() to
complete the recovery process, bnx2x attempts to disable
NAPI again by calling bnx2x_napi_disable() and freeing
resources which have already been freed, resulting in a
hang or crash.
Introduce a new flag to track the HW resource and NAPI
allocation state, refactor duplicated code into a single
function, check page pool allocation status before freeing,
and reduces debug output when a TX timeout event occurs.
Reviewed-by: Manish Chopra <manishc@marvell.com>
Tested-by: Abdul Haleem <abdhalee@in.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20230818161443.708785-2-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commits passed a size to alloc_skb that was only big enough for
the actual packet contents, but the following skb_put + memcpy writes
the whole struct efx_loopback_payload including leading and trailing
padding bytes (which are then stripped off with skb_pull/skb_trim).
This could cause an skb_over_panic, although in practice we get saved
by kmalloc_size_roundup.
Pass the entire size we use, instead of the size of the final packet.
Reported-by: Andy Moreton <andy.moreton@amd.com>
Fixes: cf60ed4696 ("sfc: use padding to fix alignment in loopback test")
Fixes: 30c24dd87f ("sfc: siena: use padding to fix alignment in loopback test")
Fixes: 1186c6b31e ("sfc: falcon: use padding to fix alignment in loopback test")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821180153.18652-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* reorder buffer filter checks can cause bad shift/UBSAN
warning with newer HW, avoid the check (mac80211)
* add Kconfig dependency for iwlwifi for PTP clock usage
-----BEGIN PGP SIGNATURE-----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=edA4
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Two fixes:
- reorder buffer filter checks can cause bad shift/UBSAN
warning with newer HW, avoid the check (mac80211)
- add Kconfig dependency for iwlwifi for PTP clock usage
* tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
wifi: iwlwifi: mvm: add dependency for PTP clock
====================
Link: https://lore.kernel.org/r/20230822124206.43926-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b655892ffd ("leds: trigger: netdev: expose hw_control status
via sysfs") exposed to sysfs the flag that tells whether the LED trigger
is offloaded to hardware, under the name "hw_control", since that is the
name under which this setting is called in the code.
Everywhere else in kernel when some work that is normally done in
software can be made to be done by hardware instead, we use the word
"offloading" to describe this, e.g. "LED blinking is offloaded to
hardware".
Normally renaming sysfs entries is a no-go because of backwards
compatibility. But since this patch was not yet released in a stable
kernel, I think it is still possible to rename it, if there is
consensus.
Fixes: b655892ffd ("leds: trigger: netdev: expose hw_control status via sysfs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230821121453.30203-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a hardware reset is triggered on devices not initializing WED the
calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a
pointer on uninitialized stack memory.
Break out of both functions in case a hw_list entry is 0.
Fixes: 08a764a7c5 ("net: ethernet: mtk_wed: add reset/reset_complete callbacks")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before adding a port to bond, it need to be set down first. In the
lacpdu test the author set the port down specifically. But commit
a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
changed the operation order, the kernel will set the port down _after_
adding to bond. So all the ports will be down at last and the test failed.
In fact, the veth interfaces are already inactive when added. This
means there's no need to set them down again before adding to the bond.
Let's just remove the link down operation.
Fixes: a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Closes: https://lore.kernel.org/netdev/a0ef07c7-91b0-94bd-240d-944a330fcabd@huawei.com/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230817082459.1685972-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
NULL pointer dereference in ice_reset_vf that VF's VSI is null.
More than one instance of ice_reset_vf() can be running at a given
time. When we rebuild the VSI in ice_reset_vf, another reset can be
triaged from ice_service_task. In this case we can access the currently
uninitialized VSI and cause panic. The window for this racing condition
has been around for a long time but it's much worse after commit
227bf4500a ("ice: move VSI delete outside deconfig") because
the reset runs faster. ice_reset_vf() using vf->cfg_lock and when
we move this lock before accessing to the VF VSI, we can fix
BUG for all cases.
Panic occurs sometimes in ice_vsi_is_rx_queue_active() and sometimes
in ice_vsi_stop_all_rx_rings()
With our reproducer, we can hit BUG:
~8h before commit 227bf4500a ("ice: move VSI delete outside deconfig").
~20m after commit 227bf4500a ("ice: move VSI delete outside deconfig").
After this fix we are not able to reproduce it after ~48h
There was commit cf90b74341 ("ice: Fix call trace with null VSI during
VF reset") which also tried to fix this issue, but it was only
partially resolved and the bug still exists.
[ 6420.658415] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6420.665382] #PF: supervisor read access in kernel mode
[ 6420.670521] #PF: error_code(0x0000) - not-present page
[ 6420.675659] PGD 0
[ 6420.677679] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 6420.682038] CPU: 53 PID: 326472 Comm: kworker/53:0 Kdump: loaded Not tainted 5.14.0-317.el9.x86_64 #1
[ 6420.691250] Hardware name: Dell Inc. PowerEdge R750/04V528, BIOS 1.6.5 04/15/2022
[ 6420.698729] Workqueue: ice ice_service_task [ice]
[ 6420.703462] RIP: 0010:ice_vsi_is_rx_queue_active+0x2d/0x60 [ice]
[ 6420.705860] ice 0000:ca:00.0: VF 0 is now untrusted
[ 6420.709494] Code: 00 00 66 83 bf 76 04 00 00 00 48 8b 77 10 74 3e 31 c0 eb 0f 0f b7 97 76 04 00 00 48 83 c0 01 39 c2 7e 2b 48 8b 97 68 04 00 00 <0f> b7 0c 42 48 8b 96 20 13 00 00 48 8d 94 8a 00 00 12 00 8b 12 83
[ 6420.714426] ice 0000:ca:00.0 ens7f0: Setting MAC 22:22:22:22:22:00 on VF 0. VF driver will be reinitialized
[ 6420.733120] RSP: 0018:ff778d2ff383fdd8 EFLAGS: 00010246
[ 6420.733123] RAX: 0000000000000000 RBX: ff2acf1916294000 RCX: 0000000000000000
[ 6420.733125] RDX: 0000000000000000 RSI: ff2acf1f2c6401a0 RDI: ff2acf1a27301828
[ 6420.762346] RBP: ff2acf1a27301828 R08: 0000000000000010 R09: 0000000000001000
[ 6420.769476] R10: ff2acf1916286000 R11: 00000000019eba3f R12: ff2acf19066460d0
[ 6420.776611] R13: ff2acf1f2c6401a0 R14: ff2acf1f2c6401a0 R15: 00000000ffffffff
[ 6420.783742] FS: 0000000000000000(0000) GS:ff2acf28ffa80000(0000) knlGS:0000000000000000
[ 6420.791829] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6420.797575] CR2: 0000000000000000 CR3: 00000016ad410003 CR4: 0000000000773ee0
[ 6420.804708] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6420.811034] vfio-pci 0000:ca:01.0: enabling device (0000 -> 0002)
[ 6420.811840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6420.811841] PKRU: 55555554
[ 6420.811842] Call Trace:
[ 6420.811843] <TASK>
[ 6420.811844] ice_reset_vf+0x9a/0x450 [ice]
[ 6420.811876] ice_process_vflr_event+0x8f/0xc0 [ice]
[ 6420.841343] ice_service_task+0x23b/0x600 [ice]
[ 6420.845884] ? __schedule+0x212/0x550
[ 6420.849550] process_one_work+0x1e2/0x3b0
[ 6420.853563] ? rescuer_thread+0x390/0x390
[ 6420.857577] worker_thread+0x50/0x3a0
[ 6420.861242] ? rescuer_thread+0x390/0x390
[ 6420.865253] kthread+0xdd/0x100
[ 6420.868400] ? kthread_complete_and_exit+0x20/0x20
[ 6420.873194] ret_from_fork+0x1f/0x30
[ 6420.876774] </TASK>
[ 6420.878967] Modules linked in: vfio_pci vfio_pci_core vfio_iommu_type1 vfio iavf vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables bridge stp llc sctp ip6_udp_tunnel udp_tunnel nfp tls nfnetlink bluetooth mlx4_en mlx4_core rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma kvm_intel i40e kvm iTCO_wdt dcdbas ib_uverbs irqbypass iTCO_vendor_support mgag200 mei_me ib_core dell_smbios isst_if_mmio isst_if_mbox_pci rapl i2c_algo_bit drm_shmem_helper intel_cstate drm_kms_helper syscopyarea sysfillrect isst_if_common sysimgblt intel_uncore fb_sys_fops dell_wmi_descriptor wmi_bmof intel_vsec mei i2c_i801 acpi_ipmi ipmi_si i2c_smbus ipmi_devintf intel_pch_thermal acpi_power_meter pcspk
r
Fixes: efe4186000 ("ice: Fix memory corruption in VF driver")
Fixes: f23df5220d ("ice: Fix spurious interrupt during removal of trusted VF")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit 7255355a06.
After this commit we are not able to attach VF to VM:
virsh attach-interface v0 hostdev --managed 0000:41:01.0 --mac 52:52:52:52:52:52
error: Failed to attach interface
error: Cannot set interface MAC to 52:52:52:52:52:52 for ifname enp65s0f0np0 vf 0: Resource temporarily unavailable
ice_check_vf_ready_for_cfg() already contain waiting for reset.
New condition in ice_check_vf_ready_for_reset() causing only problems.
Fixes: 7255355a06 ("ice: Fix ice VF reset during iavf initialization")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver is misconfiguring the hardware for some values of MTU such that
it could use multiple descriptors to receive a packet when it could have
simply used one.
Change the driver to use a round-up instead of the result of a shift, as
the shift can truncate the lower bits of the size, and result in the
problem noted above. It also aligns this driver with similar code in i40e.
The insidiousness of this problem is that everything works with the wrong
size, it's just not working as well as it could, as some MTU sizes end up
using two or more descriptors, and there is no way to tell that is
happening without looking at ice_trace or a bus analyzer.
Fixes: efc2214b60 ("ice: Add support for XDP")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The commit 06470f7468 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jakub asked if I'd be willing to be the maintainer of the macsec code
and review the driver code adding macsec offload, so let's add the
corresponding entry.
The keyword lines are meant to catch selftests and patches adding HW
offload support to other drivers.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update .gitignore to untrack tools directory and log.txt. "tools" is
generated in "selftests/net/Makefile" and log.txt is generated in
"selftests/net/gro.sh" when executing run_all_tests.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP sendmsg() is lockless, so ip_select_ident_segs()
can very well be run from multiple cpus [1]
Convert inet->inet_id to an atomic_t, but implement
a dedicated path for TCP, avoiding cost of a locked
instruction (atomic_add_return())
Note that this patch will cause a trivial merge conflict
because we added inet->flags in net-next tree.
v2: added missing change in
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
(David Ahern)
[1]
BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb
read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1:
ip_select_ident_segs include/net/ip.h:542 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0:
ip_select_ident_segs include/net/ip.h:541 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x184d -> 0x184e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
==================================================================
Fixes: 23f57406b8 ("ipv4: avoid using shared IP generator for connected sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie says:
====================
net: Fix return value check for fixed_phy_register()
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Changes in v3:
- Drop the error fix patch for fixed_phy_get_gpiod().
- Split the error code update code into another patch set as suggested.
- Update the commit title and message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: b0ba512e25 ("net: bcmgenet: enable driver to work without a device tree")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: c25b23b8a3 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 91a7cda1f4 ("net: phy: Fix race condition on link status
change") all the phy_error() method invocations have been causing the
nested-mutex-lock deadlock because it's normally done in the PHY-driver
threaded IRQ handlers which since that change have been called with the
phydev->lock mutex held. Here is the calls thread:
IRQ: phy_interrupt()
+-> mutex_lock(&phydev->lock); <--------------------+
drv->handle_interrupt() | Deadlock due
+-> ERROR: phy_error() + to the nested
+-> phy_process_error() | mutex lock
+-> mutex_lock(&phydev->lock); <-+
phydev->state = PHY_ERROR;
mutex_unlock(&phydev->lock);
mutex_unlock(&phydev->lock);
The problem can be easily reproduced just by calling phy_error() from any
PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock
mutex lock from the phy_process_error() method and printing a nasty error
message to the system log if the mutex isn't held in the caller execution
context.
Note for the fix to work correctly in the PHY-subsystem itself the
phydev->lock mutex locking must be added to the phy_error_precise()
function.
Link: https://lore.kernel.org/netdev/20230816180944.19262-1-fancer.lancer@gmail.com
Fixes: 91a7cda1f4 ("net: phy: Fix race condition on link status change")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC)
for active optical cables supporting 25G and 100G speeds.
Since the specification makes no statement about transmitter range, and
as the specific sfp module that had been tested features only 2m fiber -
short-range (SR) modes are selected.
The 100G speed is irrelevant because it would require multiple fibers /
multiple SFP28 modules combined under one netdev.
sfp-bus.c only handles a single module per netdev, so only 25Gbps modes
are selected.
sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR
with compatible properties, however that entry is a contradiction in
itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely
be a mode for qsfp modules only.
Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r
interface mode and 25000baseSR link mode.
Also enforce SFP28 bitrate limits on the values read from sfp eeprom as
requested by Russell King.
Tested with fs.com S28-AO02 AOC SFP28 module.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on the original code semantic in case of Clause 45 MDIO, the address
command is supposed to be followed by the command sending the MMD address,
not the CSR address. The commit 002dd3de09 ("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most
likely due to an unfortunate variable name it switched the code to sending
the CSR address. In our case it caused the protocol malfunction so the
read operation always failed with the turnaround bit always been driven to
one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address
command.
Fixes: 002dd3de09 ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
802.1X PAE frames are link-local frames, therefore they must be trapped to
the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as
regular multicast frames, therefore flooding them to user ports. To fix
this, set 802.1X PAE frames to be trapped to the CPU port(s).
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
mlxsw: Fixes for Spectrum-4
This patchset contains an assortment of fixes for mlxsw Spectrum-4 support.
====================
Link: https://lore.kernel.org/r/cover.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove assumptions about shared buffer cell size and instead query the
cell size from devlink. Adjust the test to send small packets that fit
inside a single cell.
Tested on Spectrum-{1,2,3,4}.
Fixes: 4735402173 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f7dfbf3c4d1cb23838d9eb99bab09afaa320c4ca.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The field 'virtual router' was extended to 12 bits in Spectrum-4.
Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for
Spectrum < 4 and 4 bits for Spectrum >= 4.
The elements are stored in an internal storage scratchpad. Currently, the
MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs
can be used for multicast routing, as the highest bit is not really used by
the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust
the definitions of 'virtual router' field in the blocks accordingly - use
'_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask
in parse function to use 4 bits.
Fixes: 6d5d8ebb88 ("mlxsw: Rename virtual router flex key element")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/79bed2b70f6b9ed58d4df02e9798a23da648015b.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two most significant bits of the "local_port" field in the SSPR
register are always cleared since they are overwritten by the deprecated
and overlapping "sub_port" field.
On systems with more than 255 local ports (e.g., Spectrum-4), this
results in the firmware maintaining invalid mappings between system port
and local port. Specifically, two different systems ports (0x1 and
0x101) point to the same local port (0x1), which eventually leads to
firmware errors.
Fix by removing the deprecated "sub_port" field.
Fixes: fd24b29a1b ("mlxsw: reg: Align existing registers to use extended local_port field")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/9b909a3033c8d3d6f67f237306bef4411c5e6ae4.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE
into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE
time stamp type is UTC. The time stamps are read directly from the CQE and
software can get the time stamp in UTC format using CQEv2.
From Spectrum-4, the time stamps that are read from the CQE are allowed
to be also from MIRROR_UTC type.
Therefore, we get a warning [1] from the driver that the time stamp fields
were not set, when LLDP control packet is sent.
Allow the time stamp type to be MIRROR_UTC and set the time stamp in this
case as well.
[1]
WARNING: CPU: 11 PID: 0 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1409 mlxsw_sp2_ptp_hwtstamp_fill+0x1f/0x70 [mlxsw_spectrum]
[...]
Call Trace:
<IRQ>
mlxsw_sp2_ptp_receive+0x3c/0x80 [mlxsw_spectrum]
mlxsw_core_skb_receive+0x119/0x190 [mlxsw_core]
mlxsw_pci_cq_tasklet+0x3c9/0x780 [mlxsw_pci]
tasklet_action_common.constprop.0+0x9f/0x110
__do_softirq+0xbb/0x296
irq_exit_rcu+0x79/0xa0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
Fixes: 4735402173 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/bcef4d044ef608a4e258d33a7ec0ecd91f480db5.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with
L3S mode and ipvlan2 with L2 mode are created based on them as
figure (1). In this case, ipvlan_register_nf_hook() will be called to
register nf hook which is needed by ipvlans in L3S mode in ns1 and value
of ipvl_nf_hook_refcnt is set to 1.
(1)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
veth3--ipvlan2 (L2)
(2)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
ipvlan2 (L2) veth3
| |
|------->-------->--------->--------
migrate
When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in
ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event:
dev_change_net_namespace
call_netdevice_notifiers
ipvlan_device_event
ipvlan_migrate_l3s_hook
ipvlan_register_nf_hook(newnet) (I)
ipvlan_unregister_nf_hook(oldnet) (II)
In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0
since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to
register nf_hook in ns2 and unregister nf_hook in ns1. As a result,
ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2
is increased incorrectly. When the second net namespace is removed, a
reference count leak warning in ipvlan_ns_exit() will be triggered.
This patch add a check before ipvlan_migrate_l3s_hook() is called. The
warning can be triggered as follows:
$ ip netns add ns1
$ ip netns add ns2
$ ip netns exec ns1 ip link add veth1 type veth peer name veth2
$ ip netns exec ns1 ip link add veth3 type veth peer name veth4
$ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s
$ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2
$ ip netns exec ns1 ip link set veth3 netns ns2
$ ip net del ns2
Fixes: 3133822f5a ("ipvlan: use pernet operations and restrict l3s hooks to master netns")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We changed tcp_poll() over time, bug never updated dccp.
Note that we also could remove dccp instead of maintaining it.
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230818015820.2701595-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
*prot->memory_pressure is read/writen locklessly, we need
to add proper annotations.
A recent commit added a new race, it is time to audit all accesses.
Fixes: 2d0c88e84e ("sock: Fix misuse of sk_under_memory_pressure()")
Fixes: 4d93df0abd ("[SCTP]: Rewrite of sctp buffer management code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Abel Wu <wuyun.abel@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit resolved a bug where frames would still get stuck at
egress, even though they're smaller than the maxSDU[tc], because the
driver did not take into account the extra 33 ns that the queue system
needs for scheduling the frame.
It now takes that into account, but the arithmetic that we perform in
vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on
64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS
may become a very large integer if gate_len_ns < 33 ns.
In practice, this means that we've introduced a regression where all
traffic class gates which are permanently closed will not get detected
by the driver, and we won't enable oversize frame dropping for them.
Before:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
After:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
Fixes: 11afdc6526 ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited fixes commit introduced linecard notifications for register,
however it didn't add them for unregister. Fix that by adding them.
Fixes: c246f9b5fd ("devlink: add support to create line card and expose to user")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230817125240.2144794-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On SDP interfaces, frame oversize and undersize errors are
observed as driver is not considering packet sizes of all
subscribers of the link before updating the link config.
This patch fixes the same.
Fixes: 9b7dd87ac0 ("octeontx2-af: Support to modify min/max allowed packet lengths")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix issues with adjusted MTUs (2 patches), by Sven Eckelmann
- Fix header access for memory reallocation case, by Remi Pommarel
- Fix two memory leaks (2 patches), by Remi Pommarel
-----BEGIN PGP SIGNATURE-----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=EsR1
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20230816' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix issues with adjusted MTUs (2 patches), by Sven Eckelmann
- Fix header access for memory reallocation case, by Remi Pommarel
- Fix two memory leaks (2 patches), by Remi Pommarel
* tag 'batadv-net-pullrequest-20230816' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix batadv_v_ogm_aggr_send memory leak
batman-adv: Fix TT global entry leak when client roamed back
batman-adv: Do not get eth header before batadv_check_management_packet
batman-adv: Don't increase MTU when set by user
batman-adv: Trigger events for auto adjusted MTU
====================
Link: https://lore.kernel.org/r/20230816163318.189996-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option
is enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ze13
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
edid:
- revert mode parsing fix that had side effects.
i915:
- Fix the flow for ignoring GuC SLPC efficient frequency selection
- Fix SDVO panel_type initialization
- Fix display probe for IVB Q and IVB D GT2 server
nouveau:
- fix use-after-free in connector code
qaic:
- integer overflow check fix
- fix slicing memory leak
panel:
- fix JDI LT070ME05000 probing
- fix AUO G121EAN01 timings
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
qxl:
- fix use after free race in dumb object allocation
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmTekjgACgkQDHTzWXnE
hr7Dtw/+Lmf8Puh9RIgqLFA6sThkRI3jaj5mr/0arFzCXhQKeVUFhDgbVMndQX2B
JajuMYY/tz1ok5dDgUbFkY7P2v+JrDMEpADGbdv1F9OjzimBimydD0fyfY92NTPL
LrugeBOQrgw2BQkY12GW010ThrzEYvapF0NTAgMXY10xsVfDkT1OkUS45TrM3KM8
rX7Vwkd48DD+N+c6wjvPP6cIKQHxktOrziCmn2ggsklGUD0anIyVpZ5mk+YC2HV+
fQKt8FihyWzdqRUEjpDn1p4HuLiaKYOBxy1Kwz8jJooqf9dA+SGA+AzXYP3wfUKs
SmX7OpwWB22yhOA027oFm4y696EVg7Al4BqyblohWwwpY/hpTMxSReNQAAogTc13
TFQ1QqDM84QDzaLG58jydxh/6gmvLuCZt4Wy/Ho+qHw+n0RGiqt29DkWcGfx0ETu
a/t5NANMO+lInmDELi8ns/ZL3m9+uXvl3VDA49VhMk1mZv1Wt+UKz8wJg83tz9SQ
7k9jpEntGGgqarF2X5hwIkTeZZtsnY3bdHaOmr2ed6OJ6Gq64r7gSfVaYx/EL5IN
qF6s8Kbow9Y/5LGIkNry0KIrv6C6+XMQSYH0+F0TaeZFh55FPdPakJvxj8lkwGRT
gWEhL1bKYeEHk7GgshztCgJl1lc47Dcbg4A7rVAH/Iyqgkqn/Hc=
=P1rE
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular enough week, mostly the usual amdgpu and i915 fixes. Also
qaic, nouveau, qxl and a revert for an EDID patch that had some side
effects, along with a couple of panel fixes.
edid:
- revert mode parsing fix that had side effects.
i915:
- Fix the flow for ignoring GuC SLPC efficient frequency selection
- Fix SDVO panel_type initialization
- Fix display probe for IVB Q and IVB D GT2 server
nouveau:
- fix use-after-free in connector code
qaic:
- integer overflow check fix
- fix slicing memory leak
panel:
- fix JDI LT070ME05000 probing
- fix AUO G121EAN01 timings
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
qxl:
- fix use after free race in dumb object allocation"
* tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm:
drm/qxl: fix UAF on handle creation
Revert "drm/edid: Fix csync detailed mode parsing"
drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: skip xcp drm device allocation when out of drm resource
drm/amd/pm: Update pci link width for smu v13.0.6
drm/amd/pm: Fix temperature unit of SMU v13.0.6
drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
drm/amdgpu: disable mcbp if parameter zero is set
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
accel/qaic: Clean up integer overflow checking in map_user_pages()
accel/qaic: Fix slicing memory leak
drm/i915: fix display probe for IVB Q and IVB D GT2 server
drm/i915/sdvo: fix panel_type initialization
drm/i915/guc/slpc: Restore efficient freq earlier
drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
drm/panel: JDI LT070ME05000 simplify with dev_err_probe()
