Commit Graph

519385 Commits

Author SHA1 Message Date
Antti Seppälä
1d971d927e [media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper
Adding a simple Manchester encoder to rc-core.
Manchester coding is used by at least RC-5 and RC-6 protocols and their
variants.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-14 14:29:14 -03:00
James Hogan
9869da5bac [media] rc: rc-ir-raw: Add scancode encoder callback
Add a callback to raw ir handlers for encoding and modulating a scancode
to a set of raw events. This could be used for transmit, or for
converting a wakeup scancode filter to a form that is more suitable for
raw hardware wake up filters.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-14 14:17:03 -03:00
Antti Palosaari
f7e5a65596 [media] msi2500: cleanups
Rename state to dev.
Correct some indentations.
Remove FSF address.
Fix some style issues reported by checkpatch.pl.
Correct some style issues I liked.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-14 08:27:23 -03:00
Antti Palosaari
faf22b13ee [media] msi2500: revise synthesizer calculation
Update synthesizer calculation to model I prefer nowadays. It is mostly
just renaming some variables, but also minor functionality change how
integer and fractional part are divided (using div_u64_rem()). Also, add
'schematic' of synthesizer following my current understanding.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-14 07:57:41 -03:00
Antti Palosaari
83e64b4d3f [media] msi001: cleanups / renames
Rename state from s to dev. Rename some other things. Fix indentations.
Disable driver unbind via sysfs.

indentation prevent unload

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-14 07:56:28 -03:00
Antti Palosaari
9195e5b246 [media] msi001: revise synthesizer calculation
Update synthesizer calculation to model I prefer nowadays. It is mostly
just renaming some variables, but also minor functionality change how
integer and fractional part are divided (using div_u64_rem()). Also, add
'schematic' of synthesizer following my current understanding.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-14 07:53:58 -03:00
Thomas Reitmayr
e989a73ebd [media] media: Fix regression in some more dib0700 based devices
Fix an oops during device initialization by correctly setting size_of_priv
instead of leaving it 0.
The regression was introduced by 8abe4a0a3f ("[media] dib7000:
export just one symbol") and only fixed for one type of dib0700 based
devices in 9e334c7564 ("[media] Fix regression in some dib0700
based devices").

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=92301

Fixes: 8abe4a0a3f ("[media] dib7000: export just one symbol")

Cc: stable@vger.kernel.org # for version 3.17+
Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 18:18:39 -03:00
Olli Salonen
356484cabe [media] dw2102: resync fifo when demod locks
If the streaming_ctrl is called to enable TS before demod has locked
the TS will be empty. Copied the solution from the dvbsky driver for the
TechnoTrend S2-4600 device: when the state changes from unlock to
lock, call su3000_streaming_ctrl again.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 17:12:42 -03:00
Olli Salonen
c636bd0bce [media] dw2102: remove unnecessary printing of MAC address
While reading the MAC address for SU3000-based devices the system was
printing excessive debug information in the logs:

Output before the patch:

[ 1515.780692] bc 00 00 00 00 00
[ 1515.781440] bc ea 00 00 00 00
[ 1515.782251] bc ea 2b 00 00 00
[ 1515.783094] bc ea 2b 46 00 00
[ 1515.783816] bc ea 2b 46 12 00
[ 1515.784565] bc ea 2b 46 12 92
[ 1515.784571] dvb-usb: MAC address: bc:ea:2b:46:12:92

Output after the patch:

[ 3803.495706] dvb-usb: MAC address: bc:ea:2b:46:12:92

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 17:12:02 -03:00
Fabian Frederick
f5d3907882 [media] siano: define SRVM_MAX_PID_FILTERS only once
SRVM_MAX_PID_FILTERS was defined in 2 sms_tx_stats structures

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 17:01:44 -03:00
Krzysztof Kozlowski
44d6ac6081 [media] staging: media: omap4iss: Constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 16:46:29 -03:00
Antonio Ospite
1a4de1b5e9 [media] cx25821: cx25821-medusa-reg.h: fix 0x0x prefix
Fix the 0x0x prefix in integer constants.

In this case a padding 0 must also be inserted to make the constants
look like all the other 16 bits ones.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 16:43:49 -03:00
Dan Carpenter
550f45bc83 [media] v4l: xilinx: harmless buffer overflow
My static checker warns that the name of the port can be 15 characters
when you consider the NUL terminator and that's one more than the 14
characters in name[].  Maybe it's an off-by-one?

It's unlikely that we hit the limit and even if we do the overflow will
only affect one of the two bytes of padding so it's harmless.  Still
let's fix it and also change the sprintf() to snprintf().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 16:26:48 -03:00
Fabio Estevam
2235cf6340 [media] st_rc: fix build warning
Building for avr32 leads the following build warning:

drivers/media/rc/st_rc.c:270: warning: passing argument 1 of 'IS_ERR' discards qualifiers from pointer target type
drivers/media/rc/st_rc.c:271: warning: passing argument 1 of 'PTR_ERR' discards qualifiers from pointer target type

devm_ioremap_resource() returns void __iomem *, so change 'base' and
'rx_base' definitions accordingly.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 16:24:26 -03:00
Fabio Estevam
3ea0f28559 [media] ir-hix5hd2: Fix build warning
Building for avr32 leads the following build warning:

drivers/media/rc/ir-hix5hd2.c:221: warning: passing argument 1 of 'IS_ERR' discards qualifiers from pointer target type
drivers/media/rc/ir-hix5hd2.c:222: warning: passing argument 1 of 'PTR_ERR' discards qualifiers from pointer target type

devm_ioremap_resource() returns void __iomem *, so change 'base' definition
accordingly.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 16:16:53 -03:00
Arnd Bergmann
0fd355c8bf [media] R820T tuner needs CONFIG_BITREVERSE
In a rarely hit randconfig case, the r820t tuner driver can
get built when CONFIG_BITREVERSE is not selected by any
other driver, resulting in this error:

drivers/built-in.o: In function `r820t_read.constprop.3':
:(.text+0xa0594): undefined reference to `byte_rev_table'

For consistency, this adds the 'select BITREVERSE' that
all other similar drivers have.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 16:06:58 -03:00
Arnd Bergmann
2aae557e1d [media] exynos4_is: exynos4-fimc requires i2c
Without i2c, we can get a build error:

drivers/media/platform/exynos4-is/fimc-is-i2c.c: In function 'fimc_is_i2c_probe':
drivers/media/platform/exynos4-is/fimc-is-i2c.c:58:8: error: implicit declaration of function 'i2c_add_adapter' [-Werror=implicit-function-declaration]

The dependency already exists for exynos-fimc-lite and s5p-fimc,
but is missing for exynos4-fimc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 16:06:28 -03:00
Mauro Carvalho Chehab
6139ebc658 [media] saa7134: fix CodingStyle issues on the lines touched by pr_foo refactor
Several lines touched by the pr_foo refactoring patches are not
following the Linux Coding style.

While we won't be fixing the style globally at the driver, we should,
at least, fix on the lines we touched.

Basically, this patch add (or remove) whitespaces and blank lines
where needed.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 14:16:43 -03:00
Mauro Carvalho Chehab
45f38cb3b8 [media] saa7134: avoid complex macro warnings
The debug macros are not properly defined, as they generate warnings
like:

ERROR: Macros with complex values should be enclosed in parentheses
+#define core_dbg(fmt, arg...)    if (core_debug) \
+	printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg)

Use do { } while (0) for those macros.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 14:12:05 -03:00
Mauro Carvalho Chehab
2bb3e2eec5 [media] saa7134: replace remaining occurences or printk()
Instead of using printk(), use pr_foo() macros.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:10:52 -03:00
Mauro Carvalho Chehab
3e0051c5a4 [media] saa7134-i2c: simplify debug dump and use pr_info()
Instead of implement its own hexdump logic, use the printk
format, and convert to use pr_info().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:10:36 -03:00
Mauro Carvalho Chehab
6be5b1a19a [media] saa7134: change the debug macros for IR input
Rename the macros to input_dbg() and ir_dbg(), using pr_fmt()
on both, to be coherent with the other debug macro changes.

The ir_dbg() also prints the IR name.

I'm not sure if it is a good idea to keep both macros here,
but merging them would require tests on different flavors of
saaa7134-based boards.

So, for now, let's keep both.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:10:17 -03:00
Mauro Carvalho Chehab
630983b759 [media] saa7134: change the debug macros for video and vbi
rename the macro to vbi_dbg()/video_dbg() and use pr_fmt(),
to be coherent with the other debug macro changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:10:00 -03:00
Mauro Carvalho Chehab
e67bcf3ebe [media] saa7134: change the debug macros for saa7134-tvaudio
use just one macro instead of 2, naming it as audio_dbg() and
using pr_fmt().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:09:43 -03:00
Mauro Carvalho Chehab
af5d20ceb3 [media] saa7134-ts: use pr_fmt() at the debug macro
instead of using dev->name, let's use pr_fmt() like on the
other parts of saa7134. Also, rename the debug macro to
ts_dbg() to match the namespace for the debug macros.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:09:28 -03:00
Mauro Carvalho Chehab
30693f346e [media] saa7134-i2c: make debug macros to use pr_fmt()
Converting debug prints to use pr_foo() is not trivial, as the
result will be a way worse than what's provided here, due to the
pieces of the code that prints the I2C transfers. Those use a
lot pr_cont(), and, depending on using either level 1 or 2,
a different set of macros are selected.

So, let's replace d1printk() and d2printk() macros by i2c_dbg()
and i2c_count() adding a debug level there.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:09:12 -03:00
Mauro Carvalho Chehab
c6c62cce32 [media] saa7134: better handle core debug messages
On media drivers, debugging messages should be grouped into
categories, as this makes easier to debug the driver.

In the case of saa7134, the core has 2 debug categories, one
for IRQ, and another one for the core itself. The IRQ have
actually 2 levels of debug.

So, instead of using pr_dbg(), where everything would be in
the same box, let's define two macros that use pr_fmt(),
one for the core, and another one for irq.

With that, we can replace the remaining printk() occurrences
at the core to use either core_dbg() or irq_dbg(), depending
on the group of debug macros that need to be enabled.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:08:52 -03:00
Mauro Carvalho Chehab
51626557ac [media] saa7134: use pr_warn() on some places where no KERN_foo were used
On a few places, mostly during board detection, some printk()
macros were called without especifying any message level.

Those are actually warnings. So, use pr_warn() for them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:08:33 -03:00
Mauro Carvalho Chehab
e43c1732ad [media] saa7134-empress: use pr_debug() for the saa7134 empress module
As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:08:15 -03:00
Mauro Carvalho Chehab
7516657af0 [media] saa7134-dvb: use pr_debug() for the saa7134 dvb module
As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:07:57 -03:00
Mauro Carvalho Chehab
ae618919f1 [media] saa7134-dvb: get rid of wprintk() macro
wprintk() macro is now just a wrapper for pr_warn(). Get rid of
it!

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 10:07:21 -03:00
Mauro Carvalho Chehab
7592eefc1c [media] saa7134-alsa: use pr_debug() instead of printk
On saa7134-alsa, there is just one printk macro that use a
different debug level.

It should be easy to enable/disable this one using dynamic_printk,
if one need to individually control it.

So, this module can easily use pr_debug() instead of using its
own macros.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 09:59:06 -03:00
Mauro Carvalho Chehab
bea8630e5d [media] saa7134: fix a few other occurrences of KERN_INFO/KERN_WARNING
On a few places, the search expression used on the script that
replaced pr_info/pr_warn didn't match, because the string were
on the next line.

It is best to manually edit those lines, and re-indent the
paragraphs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 09:57:44 -03:00
Mauro Carvalho Chehab
8358200916 [media] saa7134: instead of using printk KERN_foo, use pr_foo
Replaces all occurrences of printk with KERN_INFO, KERN_WARNING
and KERN_ERR to pr_info/pr_warning, pr_err, using this small
shell script:

for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_INFO ','pr_info(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_ERR ','pr_err(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_WARNING ','pr_warn(',g <$i >a && mv a $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 09:57:17 -03:00
Mauro Carvalho Chehab
9a12ccfc80 [media] saa7134: prepare to use pr_foo macros
Add a pr_fmt macro, and move saa7134.h header to the beginning,
to avoid warnings when using the pr_foo macros.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13 09:55:47 -03:00
David Härdeman
4d298b8539 [media] rc-core: fix dib0700 scancode generation for RC5
commit af3a4a9bbe ("[media] dib0700: NEC scancode cleanup") cleaned
up the NEC scancode logic but overlooked the RC5 case.

This patch brings the RC5 case in line with the NEC code and makes
the struct self-documenting.

Signed-off-by: David Härdeman <david@hardeman.nu>
Reported-by: David Cimbůrek <david.cimburek@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 18:27:25 -03:00
Michael S. Tsirkin
8e95dba6fb [media] media/fintek: drop pci_ids dependency
This driver does not use any PCI IDs, don't include
the pci_ids.h header.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:44:41 -03:00
Wei Yongjun
250d2ff016 [media] rtl28xxu: fix return value check in rtl2832u_tuner_attach()
In case of error, the function platform_device_register_data() returns
ERR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:27:22 -03:00
Christian Engelmayer
59c0d7b1e4 [media] mn88472: Fix possible leak in mn88472_init()
Commit 307e95c922 ("[media] mn88472: implement firmware parity check")
introduced the usage of exit paths that do not free the already allocated
firmware data in case the parity handling fails. Go through the correct
exit paths. Detected by Coverity CID 1295989.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:26:30 -03:00
Olli Salonen
699dcffc52 [media] rtl2832: add support for GoTView MasterHD 3 USB tuner
GoTView MasterHD 3 is a DVB-T2/C USB 2.0 tuner.

It's based on the following components:
- USB bridge: RTL2832P (contains also DVB-T demodulator)
- Demodulator: Si2168-A30
- Tuner: Si2148-A20

The demodulator and the tuner will need firmwares. The Si2148 uses Si2158
firmware. Antti has the firmwares available for download:
http://palosaari.fi/linux/v4l-dvb/firmware/

Do note that for DVB-T either of the demodulators can be used. DVB-C and
DVB-T2 are only supported by the Si2168 demodulator. The driver will
register 2 frontends for the same adapter. Frontend 0 will be the RTL2832
demodulator and frontend 1 will be the Si2168 demodulator. The same
tuner is used for both.

As a consequence of the above, it's recommended to use application that
does implement proper DVBv5 support.

For some reason, the old I2C write method sporadically fails. Thus the
need for an option to only use the new I2C write method supported by the
RTL2832.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:25:35 -03:00
Olli Salonen
d744a0cb8a [media] rtl28xxu: add I2C read without write
Add support for I2C read operation without a preceeding write.

While here, change the error code to EOPNOTSUPP in case an
unsupported I2C operation is attempted.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:21:29 -03:00
Olli Salonen
ee3c3e4688 [media] si2157: support selection of IF interface
The chips supported by the si2157 driver have two IF outputs (either
pins 12+13 or pins 9+11). Instead of hardcoding the output to be used
add an option to choose which output shall be used.

As this patch changes the default behaviour, the IF interface is
specified in each driver currently using si2157 driver. This is to
keep bisectability.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:20:55 -03:00
Olli Salonen
7adf99d20c [media] si2168: add I2C error handling
Return error from si2168_cmd_execute in case the demodulator returns an
error.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:19:26 -03:00
Olli Salonen
c060f9329f [media] dvbsky: use si2168 config option ts_clock_gapped
Change the dvbsky driver to support gapped clock instead of the current
hack.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:17:19 -03:00
Olli Salonen
8117a3121d [media] si2168: add support for gapped clock
Add a parameter in si2168_config to support gapped clock. This might be
necessary on some devices with higher bitrates.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 13:16:37 -03:00
Silvan Jegen
b2624ff4bf [media] mantis: fix error handling
Remove dead code, make goto label names more expressive and add a label
in order to call mantis_dvb_exit if mantis_uart_init fails.

Also make sure that mantis_pci_exit is called if we fail the
mantis_stream_control call and that we call mantis_i2c_exit if
mantis_get_mac fails.

[mchehab@osg.samsung.com: fix merge conflict]
Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 08:12:18 -03:00
Olli Salonen
44767fc418 [media] dw2102: TeVii S482 support
TeVii S482 is a PCIe device with two tuners that actually contains two
USB devices. The devices are visible in the lsusb printout.

Bus 006 Device 002: ID 9022:d483 TeVii Technology Ltd.
Bus 007 Device 002: ID 9022:d484 TeVii Technology Ltd.

The device itself works exactly with the same settings as TechnoTrend
TT-connect S2-4600. Firmware for DS3103 demodulator is required:
http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/

This patch should be applied on top of the TT S2-4600 patch:
https://patchwork.linuxtv.org/patch/28818/

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 08:02:41 -03:00
Hans Verkuil
ccf509f845 [media] marvell-ccic: fix RGB444 format
The RGB444 format swapped the red and blue components, fix this.

Rather than making a new BGR444 format (as I proposed initially), Jon prefers
to just fix this and return the colors in the right order. I think that makes
sense in this case.

Since the RGB444 pixel format is deprecated due to the ambiguous specification
of the alpha component we use the XRGB444 pixel format instead (specified as having
no alpha channel).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 04:04:26 -03:00
Lad, Prabhakar
b3ab190f1c [media] media: i2c: ov2659: Use v4l2_of_alloc_parse_endpoint()
Instead of parsing the link-frequencies property in the driver, let
v4l2_of_alloc_parse_endpoint() do it.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 04:03:23 -03:00
Fabian Frederick
7f099a7558 [media] constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

[mchehab@osg.samsung.com: fix a merge conflict at adv7604.c]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 03:58:16 -03:00