mirror of
https://github.com/torvalds/linux.git
synced 2024-12-04 18:13:04 +00:00
1c12493809
795411 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Huazhong Tan
|
1c12493809 |
net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
When there is a PHY, the driver needs to complete some operations through
MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more
suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from
being sent during the hardware reset.
Fixes:
|
||
|
Huazhong Tan
|
6d71ec6cbf |
net: hns3: bugfix for is_valid_csq_clean_head()
The HEAD pointer of the hardware command queue maybe equal to the command
queue's next_to_use in the driver, so that does not belong to the invalid
HEAD pointer, since the hardware may not process the command in time,
causing the HEAD pointer to be too late to update. The variables' name
in this function is unreadable, so give them a more readable one.
Fixes:
|
||
|
Huazhong Tan
|
5faaf0752a |
net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
It is not necessary to reset the queue in the hns3_uninit_all_ring(),
since the queue is stopped in the down operation, and will be reset
in the up operation. And the judgment of the HCLGE_STATE_RST_HANDLING
flag in the hclge_reset_tqp() is not correct, because we need to reset
tqp during pf reset, otherwise it may cause queue not being reset to
working state problem.
Fixes:
|
||
|
Huazhong Tan
|
b2f74dbaf1 |
net: hns3: bugfix for the initialization of command queue's spin lock
The spin lock of the command queue only need to be initialized once
when the driver initializes the command queue. It is not necessary to
initialize the spin lock when resetting. At the same time, the
modification of the queue member should be performed after acquiring
the lock.
Fixes:
|
||
|
Huazhong Tan
|
0d4411408a |
net: hns3: bugfix for reporting unknown vector0 interrupt repeatly problem
The current driver supports handling two vector0 interrupts, reset and
mailbox. When the hardware reports an interrupt of another type of
interrupt source, if the driver does not process the interrupt, but
enables the interrupt, the hardware will repeatedly report the unknown
interrupt.
Therefore, the driver enables the vector0 interrupt after clearing the
known type of interrupt source. Other conditions are not enabled.
Fixes:
|
||
|
Huazhong Tan
|
73b907a083 |
net: hns3: bugfix for buffer not free problem during resetting
When hns3_get_ring_config()/hns3_queue_to_ring()/
hns3_get_vector_ring_chain() failed during resetting, the allocated
memory has not been freed before these three functions return. So
this patch adds error handler in these functions to fix it.
Fixes:
|
||
|
Huazhong Tan
|
ece4bf46e9 |
net: hns3: add error handler for hns3_nic_init_vector_data()
When hns3_nic_init_vector_data() fails to map ring to vector,
it should cancel the netif_napi_add() that has been successfully
done and then exits.
Fixes:
|
||
Eric Dumazet
|
d48051c5b8 |
net/mlx5e: fix csum adjustments caused by RXFCS
As shown by Dmitris, we need to use csum_block_add() instead of csum_add() when adding the FCS contribution to skb csum. Before 4.18 (more exactly commit |
||
Jason Wang
|
ff002269a4 |
vhost: Fix Spectre V1 vulnerability
The idx in vhost_vring_ioctl() was controlled by userspace, hence a potential exploitation of the Spectre variant 1 vulnerability. Fixing this by sanitizing idx before using it to index d->vqs. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Bo YU
|
b1c234441e |
net: drop a space before tabs
Fix a warning from checkpatch.pl:'please no space before tabs' in include/net/af_unix.h Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Bo YU
|
c4147beabe |
net: add an identifier name for 'struct sock *'
Fix a warning from checkpatch: function definition argument 'struct sock *' should also have an identifier name in include/net/af_unix.h. Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Colin Ian King
|
e7611088f0 |
net: hns3: fix spelling mistake "intrerrupt" -> "interrupt"
Trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Marc Zyngier
|
a6b3a3fa04 |
net: mvpp2: Fix affinity hint allocation
The mvpp2 driver has the curious behaviour of passing a stack variable
to irq_set_affinity_hint(), which results in the kernel exploding
the first time anyone accesses this information. News flash: userspace
does, and irqbalance will happily take the machine down. Great stuff.
An easy fix is to track the mask within the queue_vector structure,
and to make sure it has the same lifetime as the interrupt itself.
Fixes:
|
||
|
Eric Dumazet
|
3aa8029e1a |
net/mlx4_en: add a missing <net/ip.h> include
Abdul Haleem reported a build error on ppc :
drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: `struct
iphdr` declared inside parameter list [enabled by default]
struct iphdr *iph)
^
drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is
only this definition or declaration, which is probably not what you want
[enabled by default]
drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function
get_fixed_ipv4_csum:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing
pointer to incomplete type
__u8 ipproto = iph->protocol;
^
Fixes:
|
||
Ido Schimmel
|
da71577545 |
rtnetlink: Disallow FDB configuration for non-Ethernet device
When an FDB entry is configured, the address is validated to have the
length of an Ethernet address, but the device for which the address is
configured can be of any type.
The above can result in the use of uninitialized memory when the address
is later compared against existing addresses since 'dev->addr_len' is
used and it may be greater than ETH_ALEN, as with ip6tnl devices.
Fix this by making sure that FDB entries are only configured for
Ethernet devices.
BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863
CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x14b/0x190 lib/dump_stack.c:113
kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956
__msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645
memcmp+0x11d/0x180 lib/string.c:863
dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464
ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline]
rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558
rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715
netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
__sys_sendmsg net/socket.c:2152 [inline]
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440ee9
Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0
R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181
kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2718 [inline]
__kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:996 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
__sys_sendmsg net/socket.c:2152 [inline]
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
v2:
* Make error message more specific (David)
Fixes:
|
||
Xin Long
|
7133583693 |
sctp: check policy more carefully when getting pr status
When getting pr_assocstatus and pr_streamstatus by sctp_getsockopt,
it doesn't correctly process the case when policy is set with
SCTP_PR_SCTP_ALL | SCTP_PR_SCTP_MASK. It even causes a
slab-out-of-bounds in sctp_getsockopt_pr_streamstatus().
This patch fixes it by return -EINVAL for this case.
Fixes:
|
||
|
Xin Long
|
df132eff46 |
sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer
If a transport is removed by asconf but there still are some chunks with this transport queuing on out_chunk_list, later an use-after-free issue will be caused when accessing this transport from these chunks in sctp_outq_flush(). This is an old bug, we fix it by clearing the transport of these chunks in out_chunk_list when removing a transport in sctp_assoc_rm_peer(). Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David S. Miller
|
2b0ab72799 |
Merge branch 'mlxsw-Couple-of-fixes'
Ido Schimmel says: ==================== mlxsw: Couple of fixes First patch makes sure mlxsw does not ignore user requests to delete FDB entries that were learned by the device. Second patch fixes a use-after-free that can be triggered by requesting a reload via devlink when the previous reload failed. Please consider both patches for stable. They apply cleanly to both 4.18.y and 4.19.y. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Shalom Toledo
|
a22712a962 |
mlxsw: core: Fix devlink unregister flow
After a failed reload, the driver is still registered to devlink, its
devlink instance is still allocated and the 'reload_fail' flag is set.
Then, in the next reload try, the driver's allocated devlink instance will
be freed without unregistering from devlink and its components (e.g,
resources). This scenario can cause a use-after-free if the user tries to
execute command via devlink user-space tool.
Fix by not freeing the devlink instance during reload (failed or not).
Fixes:
|
||
Petr Machata
|
ad0b9d9418 |
mlxsw: spectrum_switchdev: Don't ignore deletions of learned MACs
Demands to remove FDB entries should be honored even if the FDB entry in
question was originally learned, and not added by the user. Therefore
ignore the added_by_user datum for SWITCHDEV_FDB_DEL_TO_DEVICE.
Fixes:
|
||
Nathan Chancellor
|
6e29464b8a |
hinic: Fix l4_type parameter in hinic_task_set_tunnel_l4
Clang warns:
drivers/net/ethernet/huawei/hinic/hinic_tx.c:392:34: error: implicit
conversion from enumeration type 'enum hinic_l4_tunnel_type' to
different enumeration type 'enum hinic_l4_offload_type'
[-Werror,-Wenum-conversion]
hinic_task_set_tunnel_l4(task, TUNNEL_UDP_NO_CSUM,
~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~
1 error generated.
It seems that hinic_task_set_tunnel_l4 was meant to take an enum of type
hinic_l4_tunnel_type, not hinic_l4_offload_type, given both the name of
the functions and the values used.
Fixes:
|
||
Lorenzo Colitti
|
e2d00e62f2 |
Documentation: ip-sysctl.txt: Document tcp_fwmark_accept
This patch documents the tcp_fwmark_accept sysctl that was added in 3.15. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Tobias Jungel
|
414dd6fb9a |
bonding: fix length of actor system
The attribute IFLA_BOND_AD_ACTOR_SYSTEM is sent to user space having the
length of sizeof(bond->params.ad_actor_system) which is 8 byte. This
patch aligns the length to ETH_ALEN to have the same MAC address exposed
as using sysfs.
Fixes:
|
||
Hangbin Liu
|
966c37f2d7 |
ipv4/igmp: fix v1/v2 switchback timeout based on rfc3376, 8.12
Similiar with ipv6 mcast commit
|
||
Linus Torvalds
|
4b42745211 |
ARM: SoC platform updates for 4.20
A couple of platforms change hands in the MAINTAINERS file:
- Linus Walleij lists himself for the ARM Reference platforms:
versatile, vexpress, integrator and realview. He has been the main
contributor for these for a while, and makes it official now.
- Vladimir Zapolskiy takes over the LPC18xx platform from Joachim Eastwood
- Manivannan Sadhasivam becomes a secondary maintainer for the
Actions Semi machines
- Nicolas Ferre lists updates the MAINTAINER listing for the AT91
platform: Ludovic Desroches is now a co-maintainer for the platform, and
several other people (Claudiu Beznea, Cristian Birsan, Eugen Hristev,
Codrin Ciubotariu) take over individual device drivers.
Thanks everyone for working on this, and welcome to the new maintainers!
The "virt" platform on qemy or kvm can now be used in big-endian mode
without additional tricks, thanks to Jason Donenfeld.
Once again, we gain support for another NXP i.MX6 variant, this time
it's the i.MX 6ULZ 32-bit single-core version.
On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0)
and RZ/G2M (r8a774a1). These are described as microcontrollers on the
manufacturer website, but appear to be rather powerful. The RZ/G2M is
used on the reference board for the CIP Super Long Term Support (SLTS)
Linux Kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7+46
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"A couple of platforms change hands in the MAINTAINERS file:
- Linus Walleij lists himself for the ARM Reference platforms:
versatile, vexpress, integrator and realview. He has been the main
contributor for these for a while, and makes it official now.
- Vladimir Zapolskiy takes over the LPC18xx platform from Joachim
Eastwood
- Manivannan Sadhasivam becomes a secondary maintainer for the
Actions Semi machines
- Nicolas Ferre lists updates the MAINTAINER listing for the AT91
platform: Ludovic Desroches is now a co-maintainer for the
platform, and several other people (Claudiu Beznea, Cristian
Birsan, Eugen Hristev, Codrin Ciubotariu) take over individual
device drivers.
Thanks everyone for working on this, and welcome to the new
maintainers!
The "virt" platform on qemy or kvm can now be used in big-endian mode
without additional tricks, thanks to Jason Donenfeld.
Once again, we gain support for another NXP i.MX6 variant, this time
it's the i.MX 6ULZ 32-bit single-core version.
On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0)
and RZ/G2M (r8a774a1). These are described as microcontrollers on the
manufacturer website, but appear to be rather powerful. The RZ/G2M is
used on the reference board for the CIP Super Long Term Support (SLTS)
Linux Kernels"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
MAINTAINERS: Assign myself as a maintainer of ARM/LPC18XX architecture
arm64: exynos: Enable generic power domain support
MAINTAINERS: remove non-exsiting email address of Baoyou
MAINTAINERS: fix pattern in ARM/Synaptics berlin SoC section
MAINTAINERS: Drop dt-bindings/genpd/k2g.h
ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms
arm64: actions: Enable PINCTRL in platforms Kconfig
MAINTAINERS: Add entry for Actions Semi Owl SoCs DMA driver
MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver
MAINTAINERS: Update clock binding entry for Actions Semi Owl SoCs
ARM: imx: add i.mx6ulz msl support
ARM: Assume maintainership of ARM reference designs
ARM: support big-endian for the virt architecture
MAINTAINERS: sdhci: move the Microchip entry to proper location
MAINTAINERS: move former ATMEL entries to proper MICROCHIP location
MAINTAINERS: remove the / ATMEL string from MICROCHIP entries
MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver
MAINTAINERS: pwm: add entry for Microchip pwm driver
MAINTAINERS: dmaengine: add files to Microchip dma entry
MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver
...
|
||
|
Linus Torvalds
|
b22b6beae6 |
ARM: SoC driver updates for 4.17
The most noteworthy SoC driver changes this time include:
- The TEE subsystem gains an in-kernel interface to access the TEE
from device drivers.
- The reset controller subsystem gains a driver for the Qualcomm
Snapdragon 845 Power Domain Controller.
- The Xilinx Zynq platform now has a firmware interface for its
platform management unit. This contains a firmware "ioctl" interface
that was a little controversial at first, but the version we merged
solved that by not exposing arbitrary firmware calls to user space.
- The Amlogic Meson platform gains a "canvas" driver that is used
for video processing and shared between different high-level drivers.
The rest is more of the usual, mostly related to SoC specific power
management support and core drivers in drivers/soc:
- Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
features related to power and reset control.
- The Mediatek mt8183 and mt6765 SoC platforms gain support for
their respective power management chips.
- A new driver for NXP i.MX8, which need a firmware interface for
power management.
- The SCPI firmware interface now contains support estimating power
usage of performance states
- The NVIDIA Tegra "pmc" driver gains a few new features, in particular
a pinctrl interface for configuring the pads.
- Lots of small changes for Qualcomm, in particular the "smem"
device driver.
- Some cleanups for the TI OMAP series related to their sysc
controller.
Additional cleanups and bugfixes in SoC specific drivers include the
Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=c/PQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most noteworthy SoC driver changes this time include:
- The TEE subsystem gains an in-kernel interface to access the TEE
from device drivers.
- The reset controller subsystem gains a driver for the Qualcomm
Snapdragon 845 Power Domain Controller.
- The Xilinx Zynq platform now has a firmware interface for its
platform management unit. This contains a firmware "ioctl"
interface that was a little controversial at first, but the version
we merged solved that by not exposing arbitrary firmware calls to
user space.
- The Amlogic Meson platform gains a "canvas" driver that is used for
video processing and shared between different high-level drivers.
The rest is more of the usual, mostly related to SoC specific power
management support and core drivers in drivers/soc:
- Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
features related to power and reset control.
- The Mediatek mt8183 and mt6765 SoC platforms gain support for their
respective power management chips.
- A new driver for NXP i.MX8, which need a firmware interface for
power management.
- The SCPI firmware interface now contains support estimating power
usage of performance states
- The NVIDIA Tegra "pmc" driver gains a few new features, in
particular a pinctrl interface for configuring the pads.
- Lots of small changes for Qualcomm, in particular the "smem" device
driver.
- Some cleanups for the TI OMAP series related to their sysc
controller.
Additional cleanups and bugfixes in SoC specific drivers include the
Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
firmware: tegra: bpmp: Implement suspend/resume support
drivers: clk: Add ZynqMP clock driver
dt-bindings: clock: Add bindings for ZynqMP clock driver
firmware: xilinx: Add zynqmp IOCTL API for device control
Documentation: xilinx: Add documentation for eemi APIs
MAINTAINERS: imx: include drivers/firmware/imx path
firmware: imx: add misc svc support
firmware: imx: add SCU firmware driver support
reset: Fix potential use-after-free in __of_reset_control_get()
dt-bindings: arm: fsl: add scu binding doc
soc: fsl: qbman: add interrupt coalesce changing APIs
soc: fsl: bman_portals: defer probe after bman's probe
soc: fsl: qbman: Use last response to determine valid bit
soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
soc: fsl: qbman: Check if CPU is offline when initializing portals
reset: qcom: PDC Global (Power Domain Controller) reset controller
dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
reset: Grammar s/more then once/more than once/
bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
...
|
||
|
Linus Torvalds
|
53b7a3b7ec |
ARM: SoC defconfig updates
The defconfig changes are split out from the rest again. This time we have a number of changes for NXP i.MX and Renesas, including a cleanup of old options. Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm, Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just enable platform specific device drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJb1yrpAAoJEGCrR//JCVIn3FIP/jYpKIKb1gvuxF9jAgNRHt2q dkAJ0eRiKewNRPnlY5KOsYpvzlhmMVCaB6ZVtEDWR/U++tlQjW9A7ZJx4b5yOr3y 7em5+dZ9nlq3G4Fx/Bs7VFoRrGQjINMFpDwSgHv2ffmH0L2r1z1eSeGHTK+82VpI nfmj78c+W4wAv9V9p1eVUb/A68oYwnNZEjqirNHN0mFDrPCMiHTA7WeUmZ+aDAQ0 01OodB5Kh/+tYcK/Lb/2zo8IhPBfqrDdkKKaD0EWp5AcOb6LGF/Q2oFFUD22IgT1 CXJSN+/+1ObU4fo08bfAb1zruG+QDNsw1xmP2h+EbPBTAOjXkDUQBx3mRNNNbnFv Z4yMh1dDNSg2YCpzx9x5xqIb//Brc0ZbuqO3UKHfVK2IZhUWbJXD7LPUw+Jk9QLs Zt5JhRuJaCbZaTKPMs1XrNN5NmnutlttLVuk+pq7QaXGDsMf9I2pt887XfGakxBt 3/hpx2zU7yqjJpdv4IAcS337jqummjRhTw+4m6Fb30Fg9kcv1oBQBZYAES6pb5eQ hI5K9IOb4IX/klnvTTB6p0jhbZskh3HHeHhrQVEzPOO9RjTRI2rQZ8VmRqwtBtKX nBMfTLgpHtLHaHuRaI1DdX9pdq6B/ubX68hvKZEWMDk+3Use0lGlHKFtS+/M+7SH vdNXGxqBtVsvaJsSDVKc =cE9r -----END PGP SIGNATURE----- Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Arnd Bergmann: "The defconfig changes are split out from the rest again. This time we have a number of changes for NXP i.MX and Renesas, including a cleanup of old options. Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm, Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just enable platform specific device drivers" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) arm64: defconfig: Enable SERIAL_8250_OMAP arm64: defconfig: Enable TI_SCI related configs ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL ARM: imx_v4_v5_defconfig: Remove unneeded options ARM: imx_v4_v5_defconfig: Re-sync defconfig ARM: mxs_defconfig: Remove unneeded options ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v6_v7_defconfig: Remove unneeded options ARM: imx_v6_v7_defconfig: Re-sync defconfig ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC ARM: multi_v7_defconfig: enable CONFIG_MMC_UNIPHIER arm64: defconfig: enable CONFIG_MMC_UNIPHIER ARM: multi_v7_defconfig: Enable USB phys for UniPhier SoCs arm64: defconfig: Enable USB phys for UniPhier SoCs arm64: defconfig: enable Rockchip Innosilicon hdmiphy arm64: defconfig: Enable PCIEPORTBUS arm64: defconfig: enable HiSilicon HNS3 driver ... |
||
|
Linus Torvalds
|
93335e5911 |
ARM: SoC device tree updates for 4.20
There are close to 800 indivudal changesets in this branch again, which feels like a lot. There are particularly many changes for the NVIDIA Tegra platform this time, in fact more than it has seen in the two years since the v4.9 merge window. Aside from this, it's been fairly normal, with lots of changes going into Renesas R-CAR, NXP i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP. Most of the changes are for adding new features into existing boards, for brevity I'm only mentioning completely new machines and SoCs here. For the first time I think we have (slightly) more new 64-bit hardware than 32-bit: Two boards get added for TI OMAP: Moxa UC-2101 is an industrial computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a minor variation of the motherboards of the GTA04 phone, see https://shop.goldelico.com/wiki.php?page=GTA04A5 Clearfog is a nice little board for quad-core Marvell Armada 8040 network processor, see https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/ Two additional server boards come with the Aspeed baseboard management controllers: Stardragon4800 is an arm64 reference platform made by HXT (based on Qualcomm's server chips), and TiogaPass is an Open Compute mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the BMC. NXP i.MX usually sees a lot of new boards each release. This time there we only add one minor variant: ConnectCore 6UL SBC Pro uses the same SoM design as the ConnectCore 6UL SBC Express added later. However, there is a new chip, the i.MX6ULZ, which is an even smaller variant of the i.MX6ULL, with features removed. There is also support for the reference board design, the i.MX6ULZ 14x14 EVK. A new Raspberry Pi variant gets added, this one is the CM3 compute module based on bcm2837, it was launched in early 2017 but only now added to the kernel, both as 32-bit and as 64-bit files, as we tend to do for Raspberry Pi. On the Allwinner side, everything is again about cheap development boards, usually of the "Fruit Pi" variety. The new ones this time are: Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/ Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/ Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html The last one of these is now a 64-bit version of the earlier Banana Pi M2+ H3, with the same board layout. Similarly, for Rockchips, get get another variant of the 32-bit Asus Tinker board, the model 'S' based on rk3288, and three now boards based on the popular RK3399 chip: ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/ Rock960: https://www.96boards.org/product/rock960/ RockPro64: https://www.pine64.org/?page_id=61454 These are all quite powerful boards with lots of RAM and I/O, and the RK3399 is the same chip used in several Chromebooks. Finally, we get support for the PX30 (aka rk3326) chip, which is based on the low-end 64-bit Cortex-A35 CPU core. So far, only the evaluation board is supported. One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is based on the MT7622 WiFi router platform, and the first product I've seen with a 64-bit Mediatek chip in that market: http://www.banana-pi.org/r64.html For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370 development board, which are similar to the Hi3660 and Hikey 360 respectively, but add support for an NPU. Amlogic gets initial support for the Meson-G12A chip (S905D2), another quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit side, we gain support for an actual end-user product, the Endless Computers Endless Mini based on Meson8b (S805), see https://endlessos.com/computers/ Qualcomm adds support for their MSM8998 SoC and evaluation platform. This chip is commonly known as the Snapdragon 835, and is used in high-end phones as well as low-end laptops. For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added, but no boards for this one. However, we do add boards for the previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the M3NULCB Starter Kit Pro. While we have lots of DT changes for NVIDIA to update the existing files, the only board that gets added is the Toradex Colibri T20 on Colibri Evaluation Board for the old Tegra2. Synaptics add support for their AS370 SoC, which is part of the (formerly Marvell) Berlin line of set-top-box chips used e.g. in the various Google Chromecast. Only the .dtsi gets added at this point, no actual machines. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJb1224AAoJEGCrR//JCVIn9uYP/jLMoGkVQRS5L9sRjOci1l5b EHl8veJ+uNJaTStp5XAZk90MoBcSdXtnISSEiR7a3qKJw1mYfgAWyPtQCttRFUCo rDp4GJpJ96TBg1tyt5Lop3V9eIYbCh9epf2foKTTdpRiX022AFk1031jvnh2Teuy fKA2VNeoyyOZqxh0ysJq7G8kWt8PTQTKXDebYPWEbsu0AFmqQ84lz7oGNdPk0GPm krtQIO6rh+sJR/8wWGYfnTYAIOk6jNrPhiyjEcyu+x2525rwKxJNKVY8P9PuNhrl hzqld1dPtb3gfdcxWxZUznHmVUGkVEIa1QNC6csSmLzuxqJJE0/J5u2P8lIfrhVI c5C8r3eaTxFM0s5uKhNhhewlJ6uiDhUQy13AG0JXteujP23BGObYstnV10pJrH75 xq7uSUiU04v95MocPjodJ2I7dIlAoFCd6ELnsmD/mz743gY9AZ6DHaOBMMwIzK3H EQifF5E/4PWOjBx7fonumBm0LebPjWGmv4CNyCK5Q93ylK7U/kFDdjiNjNhyks5E CVQBFhA7sshKJQRDOiaofMxOfKJHeKGU2PR7yGRpT3YWQD/apIL/elG4qUNjLX46 2Dwdgq8nDdbY2SzPwwy7ncTtyDRYcsFCtScT5slu1I1UxIhwEYJurzCKDM4jJNZb Cg2D7a+AlZ8N5Vsr1ldV =yaED -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "There are close to 800 indivudal changesets in this branch again, which feels like a lot. There are particularly many changes for the NVIDIA Tegra platform this time, in fact more than it has seen in the two years since the v4.9 merge window. Aside from this, it's been fairly normal, with lots of changes going into Renesas R-CAR, NXP i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP. Most of the changes are for adding new features into existing boards, for brevity I'm only mentioning completely new machines and SoCs here. For the first time I think we have (slightly) more new 64-bit hardware than 32-bit: Two boards get added for TI OMAP: Moxa UC-2101 is an industrial computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a minor variation of the motherboards of the GTA04 phone, see https://shop.goldelico.com/wiki.php?page=GTA04A5 Clearfog is a nice little board for quad-core Marvell Armada 8040 network processor, see https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/ Two additional server boards come with the Aspeed baseboard management controllers: Stardragon4800 is an arm64 reference platform made by HXT (based on Qualcomm's server chips), and TiogaPass is an Open Compute mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the BMC. NXP i.MX usually sees a lot of new boards each release. This time there we only add one minor variant: ConnectCore 6UL SBC Pro uses the same SoM design as the ConnectCore 6UL SBC Express added later. However, there is a new chip, the i.MX6ULZ, which is an even smaller variant of the i.MX6ULL, with features removed. There is also support for the reference board design, the i.MX6ULZ 14x14 EVK. A new Raspberry Pi variant gets added, this one is the CM3 compute module based on bcm2837, it was launched in early 2017 but only now added to the kernel, both as 32-bit and as 64-bit files, as we tend to do for Raspberry Pi. On the Allwinner side, everything is again about cheap development boards, usually of the "Fruit Pi" variety. The new ones this time are: - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/ - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/ - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html The last one of these is now a 64-bit version of the earlier Banana Pi M2+ H3, with the same board layout. Similarly, for Rockchips, get get another variant of the 32-bit Asus Tinker board, the model 'S' based on rk3288, and three now boards based on the popular RK3399 chip: - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/ - Rock960: https://www.96boards.org/product/rock960/ - RockPro64: https://www.pine64.org/?page_id=61454 These are all quite powerful boards with lots of RAM and I/O, and the RK3399 is the same chip used in several Chromebooks. Finally, we get support for the PX30 (aka rk3326) chip, which is based on the low-end 64-bit Cortex-A35 CPU core. So far, only the evaluation board is supported. One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is based on the MT7622 WiFi router platform, and the first product I've seen with a 64-bit Mediatek chip in that market: http://www.banana-pi.org/r64.html For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370 development board, which are similar to the Hi3660 and Hikey 360 respectively, but add support for an NPU. Amlogic gets initial support for the Meson-G12A chip (S905D2), another quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit side, we gain support for an actual end-user product, the Endless Computers Endless Mini based on Meson8b (S805), see https://endlessos.com/computers/ Qualcomm adds support for their MSM8998 SoC and evaluation platform. This chip is commonly known as the Snapdragon 835, and is used in high-end phones as well as low-end laptops. For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added, but no boards for this one. However, we do add boards for the previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the M3NULCB Starter Kit Pro. While we have lots of DT changes for NVIDIA to update the existing files, the only board that gets added is the Toradex Colibri T20 on Colibri Evaluation Board for the old Tegra2. Synaptics add support for their AS370 SoC, which is part of the (formerly Marvell) Berlin line of set-top-box chips used e.g. in the various Google Chromecast. Only the .dtsi gets added at this point, no actual machines" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits) ARM: dts: socfgpa: remove ethernet aliases from dtsi arm64: dts: stratix10: add ethernet aliases dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI dt-bindings: mediatek: Add JPEG Decoder binding for MT7623 dt-bindings: iommu: mediatek: Add binding for MT7623 dt-bindings: clock: mediatek: add support for MT7623 ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites ARM: dts: da850-lego-ev3: slow down A/DC as much as possible ARM: dts: da850-evm: Enable tca6416 on baseboard arm64: dts: uniphier: Add USB2 PHY nodes arm64: dts: uniphier: Add USB3 controller nodes ARM: dts: uniphier: Add USB2 PHY nodes ARM: dts: uniphier: Add USB3 controller nodes arm64: dts: meson-axg: s400: disable emmc arm64: dts: meson-axg: s400: add missing emmc pwrseq arm64: dts: clearfog-gt-8k: add PCIe slot description ARM: dts: at91: sama5d4_xplained: even nand memory partitions ARM: dts: at91: sama5d3_xplained: even nand memory partitions ARM: dts: at91: at91sam9x5cm: even nand memory partitions ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets ... |
||
|
Linus Torvalds
|
c38239b4be |
Merge branch 'parisc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Three small patches:
- A boot fix for A500 machines, crash was caused by the new
alternative patching code from this merge window (Dave)
- Change __kernel_suseconds_t to match glibc on 64-bit parisc (Arnd)
- Use constants instead of hard-coded numbers (me)"
* 'parisc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix A500 boot crash
parisc: Use LINUX_GATEWAY_SPACE constant in entry.S
parisc64: change __kernel_suseconds_t to match glibc
|
||
|
Linus Torvalds
|
57dbde63f2 |
Merge branch 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "I2C has not so much stuff this time. Mostly driver enablement for new SoCs, some driver bugfixes, and some cleanups" * 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (35 commits) MAINTAINERS: add maintainer for Renesas RIIC driver i2c: sh_mobile: Remove dummy runtime PM callbacks i2c: uniphier-f: fix race condition when IRQ is cleared i2c: uniphier-f: fix occasional timeout error i2c: uniphier-f: make driver robust against concurrency i2c: i2c-qcom-geni: Simplify irq handler i2c: i2c-qcom-geni: Simplify tx/rx functions i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers i2c: mux: mlxcpld: simplify code to reach the adapter i2c: mux: ltc4306: simplify code to reach the adapter i2c: mux: pca954x: simplify code to reach the adapter i2c: core: remove level of indentation in i2c_transfer i2c: core: remove outdated DEBUG output i2c: zx2967: use core to detect 'no zero length' quirk i2c: tegra: use core to detect 'no zero length' quirk i2c: qup: use core to detect 'no zero length' quirk i2c: omap: use core to detect 'no zero length' quirk i2c: Convert to using %pOFn instead of device_node.name i2c: brcmstb: Allow enabling the driver on DSL SoCs eeprom: at24: fix unexpected timeout under high load ... |
||
|
Linus Torvalds
|
134bf98c55 |
media updates for v4.20-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJb12wyAAoJEAhfPr2O5OEVQG4P/3QlXjec6qlhbo6UPs54E2sC bVdZfp3mobo8NmLRt791Yh9cc0rN45Tlf2BT8XEmCyI6+NB++obU/j0LW5XT7sp7 oE8IgeRraVFWH/Xl9lTgP15Cs6v43eyvP12xgRWBmr+TYugLHDVTheGBvU/COb3d yaykUULezuOMLA3HsPbz5EJOmU5rZ/Wa1w1sAiNJY/cRohfVb3kO4593enwUTMSx yHJ+AVjl/Dn3RV4yLwoybpxPH6XIb3KoLg/6Fx8bOlKy1sg0mcWpzQ1CvMUNpXTF kdwTw3ri1bfYnjChZewuKoJU8Wcw0Gt7pkqAhULN1ieo84MNA3bNor56pdRPaOZW KxzlXZRS6xgYW8bzZ51N0Ku6fwSt3AWRE7TeKcrHF84Yb8vOtPS15sp3qc+9o9rb EDV/lJLcz4bbi3W28di5WMFaN7LHxCHnRV7GvrcNQm6Im62CBFZHiI7jKjMv3tXp Taes0utMPGfWuY6fv4LmuBzFG4nGB6/H4RiVvL1cLkjnx/FJtWGH+1uOcKDraKeI ENBrK0VYrNH7nCDGNehiamStcVK+27tS+xsuqoZkGz6RA8vAxYBXTIZULXA98BPA f6NC32ZNJaruxh4qh5tUy+LKPGzXs0sWa9kfgKmFfaOndFLMjGTXHpAT5AYJMbNe iqKi/4aXD4aKAWTA7PPg =Cc6D -----END PGP SIGNATURE----- Merge tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new dvb frontend driver: lnbh29 - new sensor drivers: imx319 and imx 355 - some old soc_camera driver renames to avoid conflict with new drivers - new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver - a new V4L2 frontend for the FWHT codec - several other improvements, bug fixes, code cleanups, etc * tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits) media: rename soc_camera I2C drivers media: cec: forgot to cancel delayed work media: vivid: Support 480p for webcam capture media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD media: vivid: Add 16-bit bayer to format list media: v4l2-tpg-core: Add 16-bit bayer media: pvrusb2: replace `printk` with `pr_*` media: venus: vdec: fix decoded data size media: cx231xx: fix potential sign-extension overflow on large shift media: dt-bindings: media: rcar_vin: add device tree support for r8a7744 media: isif: fix a NULL pointer dereference bug media: exynos4-is: make const array config_ids static media: cx23885: make const array addr_list static media: ivtv: make const array addr_list static media: bttv-input: make const array addr_list static media: cx18: Don't check for address of video_dev media: dw9807-vcm: Fix probe error handling media: dw9714: Remove useless error message media: dw9714: Fix error handling in probe function media: cec: name for RC passthrough device does not need 'RC for' ... |
||
Chris Brandt
|
84de6e96e0 |
MAINTAINERS: add maintainer for Renesas RIIC driver
The RIIC I2C controller is used in Renesas RZ/A SoCs. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> [wsa: added documentation file] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
Jarkko Nikula
|
7ce6c65b61 |
i2c: sh_mobile: Remove dummy runtime PM callbacks
Platform drivers don't need dummy runtime PM callbacks that just return success and non-NULL pm pointer in their struct device_driver in order to have runtime PM happening. This has changed since following commits: |
||
Masahiro Yamada
|
eaba68785c |
i2c: uniphier-f: fix race condition when IRQ is cleared
The current IRQ handler clears all the IRQ status bits when it bails
out. This is dangerous because it might clear away the status bits
that have just been set while processing the current handler. If this
happens, the IRQ event for the latest transfer is lost forever.
The IRQ status bits must be cleared *before* the next transfer is
kicked.
Fixes:
|
||
|
Masahiro Yamada
|
39226aaa85 |
i2c: uniphier-f: fix occasional timeout error
Currently, a timeout error could happen at a repeated START condition.
For a (non-repeated) START condition, the controller starts sending
data when the UNIPHIER_FI2C_CR_STA bit is set. However, for a repeated
START condition, the hardware starts running when the slave address is
written to the TX FIFO - the write to the UNIPHIER_FI2C_CR register is
actually unneeded.
Because the hardware is already running before the IRQ is enabled for
a repeated START, the driver may miss the IRQ event. In most cases,
this problem does not show up since modern CPUs are much faster than
the I2C transfer. However, it is still possible that a context switch
happens after the controller starts, but before the IRQ register is
set up.
To fix this,
- Do not write UNIPHIER_FI2C_CR for repeated START conditions.
- Enable IRQ *before* writing the slave address to the TX FIFO.
- Disable IRQ for the current CPU while queuing up the TX FIFO;
If the CPU is interrupted by some task, the interrupt handler
might be invoked due to the empty TX FIFO before completing the
setup.
Fixes:
|
||
|
Masahiro Yamada
|
f1fdcbbdf4 |
i2c: uniphier-f: make driver robust against concurrency
This is unlikely to happen, but it is possible for a CPU to enter
the interrupt handler just after wait_for_completion_timeout() has
expired. If this happens, the hardware is accessed from multiple
contexts concurrently.
Disable the IRQ after wait_for_completion_timeout(), and do nothing
from the handler when the IRQ is disabled.
Fixes:
|
||
Wolfram Sang
|
a560ae55dc | Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.20-fixed | ||
|
Linus Torvalds
|
044ee89028 |
HID: input: simplify/fix high-res scroll event handling
Commit
|
||
|
Linus Torvalds
|
5bd4af34a0 |
TTY/Serial patches for 4.20-rc1
Here is the big tty and serial pull request for 4.20-rc1 Lots of little things here, including a merge from the SPI tree in order to keep things simpler for everyone to sync around for one platform. Major stuff is: - tty buffer clearing after use - atmel_serial fixes and additions - xilinx uart driver updates and of course, lots of tiny fixes and additions to individual serial drivers. All of these have been in linux-next with no reported issues for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9bW0w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymYhgCfbxr0T+4lF/rpGxNXNnV4u5boRJUAn2L8R+1y URbAWHvKfaby2AVfQ1z0 =qTHH -----END PGP SIGNATURE----- Merge tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big tty and serial pull request for 4.20-rc1 Lots of little things here, including a merge from the SPI tree in order to keep things simpler for everyone to sync around for one platform. Major stuff is: - tty buffer clearing after use - atmel_serial fixes and additions - xilinx uart driver updates and of course, lots of tiny fixes and additions to individual serial drivers. All of these have been in linux-next with no reported issues for a while" * tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits) of: base: Change logic in of_alias_get_alias_list() of: base: Fix english spelling in of_alias_get_alias_list() serial: sh-sci: do not warn if DMA transfers are not supported serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES tty: check name length in tty_find_polling_driver() serial: sh-sci: Add r8a77990 support tty: wipe buffer if not echoing data tty: wipe buffer. serial: fsl_lpuart: Remove the alias node dependence TTY: sn_console: Replace spin_is_locked() with spin_trylock() Revert "serial:serial_core: Allow use of CTS for PPS line discipline" serial: 8250_uniphier: add auto-flow-control support serial: 8250_uniphier: flatten probe function serial: 8250_uniphier: remove unused "fifo-size" property dt-bindings: serial: sh-sci: Document r8a7744 bindings serial: uartps: Fix missing unlock on error in cdns_get_id() tty/serial: atmel: add ISO7816 support tty/serial_core: add ISO7816 infrastructure serial:serial_core: Allow use of CTS for PPS line discipline serial: docs: Fix filename for serial reference implementation ... |
||
|
Linus Torvalds
|
738b04fba1 |
Staging/IIO patches for 4.20-rc1
Here is the big staging and IIO driver pull request for 4.20-rc1.
There are lots of things here, we ended up adding more lines than
removing, thanks to a large influx of Comedi National Instrument device
support. Someday soon we need to get comedi out of staging...
Other than the comedi drivers, the "big" things here are:
- new iio drivers
- delete dgnc driver (no one used it and no one had the hardware
anymore)
- vbox driver updates and fixes
- erofs fixes
- tons and tons of tiny checkpatch fixes for almost all staging
drivers
All of these have been in linux-next, with the last few happening a bit
"late" due to them getting stuck on my laptop during travel to the
Mantainers summit.
When merging with your tree, there will be 2 merge conflicts, both files
will be simple to resolve, just delete them :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9bSGA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk5eACfYp73m9tLO22rnBcXJ73bWAYSTOMAn2GEL4Nc
LZBXs8QvvJIwfqmi7ofn
=UWJn
-----END PGP SIGNATURE-----
Merge tag 'staging-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the big staging and IIO driver pull request for 4.20-rc1.
There are lots of things here, we ended up adding more lines than
removing, thanks to a large influx of Comedi National Instrument
device support. Someday soon we need to get comedi out of staging...
Other than the comedi drivers, the "big" things here are:
- new iio drivers
- delete dgnc driver (no one used it and no one had the hardware
anymore)
- vbox driver updates and fixes
- erofs fixes
- tons and tons of tiny checkpatch fixes for almost all staging
drivers
All of these have been in linux-next, with the last few happening a
bit "late" due to them getting stuck on my laptop during travel to the
Mantainers summit"
* tag 'staging-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (690 commits)
staging: gasket: Fix sparse "incorrect type in assignment" warnings.
staging: gasket: remove debug logs for callback invocation
staging: gasket: remove debug logs in page table mapping calls
staging: rtl8188eu: core: Use sizeof(*p) instead of sizeof(struct P) for memory allocation
staging: ks7010: Remove extra blank line
staging: gasket: Remove extra blank line
staging: media: davinci_vpfe: Fix spelling mistake in enum
staging: speakup: Add a pair of braces
staging: wlan-ng: Replace long int with long
staging: MAINTAINERS: remove obsolete IPX staging directory
staging: MAINTAINERS: remove NCP filesystem entry
staging: rtl8188eu: cleanup comparsions to false
staging: gasket: Update device virtual address comment
staging: gasket: sysfs: fix attribute release comment
staging: gasket: apex: fix sysfs_show
staging: gasket: page_table: simplify gasket_components_to_dev_address
staging: gasket: page_table: fix comment in components_to_dev_address
staging: gasket: page table: fixup error path allocating coherent mem
staging: gasket: page_table: rearrange gasket_page_table_entry
staging: gasket: page_table: remove unnecessary PTE status set to free
...
|
||
|
Linus Torvalds
|
fe675d4d3c |
- Convert print users to use the %pOFn format specifier
- Enable ti-msgmr driver for the K3 platform as well - Add QCS404 to compatible list of QCOM's APCS IPC driver - Minor spelling fixes toogle -> toggle - kzalloc failure catch in Mediatek driver -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAlvWoPwACgkQf9lkf8eY P5WTow//SixXy6IrXP+8c9tpuXjTdWbyk1mho2ea6QUsxvnezMp9Qos9/hsaV6ly wE14CVHGrWXbQ7OJigAVf1gG8a/Wp/GH47gHRljkqOCpdAP5Azx806MQYJQF5nTt 0kioseREhGFL24MUlvfo7KQH/GDi/WHrCksXxyXNNIVQPaII7TcE+mEul9e1QXZm ZhaPjeMJfY6wfnCFS7gwfSyNsofL3rkuuKavtlF2SKcqMfnI4K3XOq4wDdYwt9lN N8fIHqrf7AuBQiLSvXc5Ec5qOo8BcfyY9u+igzontKWC01MBWBobzRzvex6moQzW 7pTY+7eBERplRKQVAvV9ft+XhXpVV4+YUNlqmczYdnx+6xKjxisMR+hBbBO0rNcp msXEpBPPWm/T25qERcUgiwXhBma2K1SOUytdHLcrWxLsfXsNf0NMVMwSS+ZBV6mg JB5zwHtHcJ/Yw+FlZxsHbCySCYQvc9rjxudZbOY4DS9V8Of67263Ca0EEndUoQdR vwnwraDgt9VC33Kn6c8EVxFycZnQ9LlbR9GAAu+fAfN55M/bpMILPKPNhgpMOMW5 km2pelku0vBbPFIMgSMmjrYa1khHaZcTtFBIyenvaDU5h6FIJ7iC6D+OwidIAi+d gQqSHoInfRcaSxhxqWLuZVk5VeTFlkWSAXCH6aF5MoY8kon/nBc= =KH5m -----END PGP SIGNATURE----- Merge tag 'mailbox-v4.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - convert print users to use the %pOFn format specifier - enable ti-msgmr driver for the K3 platform as well - add QCS404 to compatible list of QCOM's APCS IPC driver - minor spelling fixes toogle -> toggle - kzalloc failure catch in Mediatek driver * tag 'mailbox-v4.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mediatek: Add check for possible failure of kzalloc mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle" mailbox: qcom: Add QCS404 APPS Global compatible drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3 mailbox: Convert to using %pOFn instead of device_node.name |
||
|
Linus Torvalds
|
e64433d587 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlvW43UACgkQnJ2qBz9k QNnqtQgA2uzRlz6U7UayQl9JiYKd2XbuojmAE+irdSL5+4OzpqkOsRfLzGSKAfvs ekv1eVv+4+PS90FUNbvwmX/OzZ9wi3e5d3/qfnJ7l2ZsMfKuc9aW/9I8EXPXkpAB O7NgoTtOZMXTJXMhseMmha2JfpbQZZ566NzCDfhOfPKqylbjTEM58pcY382VGRDX Iv1DNwrzPw7PaOOYO3P/vWLeb4GGpMkdG61eoTBMi6SKb/5QMc6MS+WqYzmdLZWE aP4tK8VhC0L47i0myXzWOHMrjQysq+E24CuQ6zG2O4bFRZj1fT+hiST9SwyUim2+ Ne8P5gnHJiBSZgYtKBoETNI0jORzCA== =9DMi -----END PGP SIGNATURE----- Merge tag 'filesystems_for_v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2 and udf updates from Jan Kara: "Small ext2 cleanups and a couple of udf fixes" * tag 'filesystems_for_v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: remove redundant building macro check udf: Drop pack pragma from udf_sb.h udf: Drop freed bitmap / table support udf: Fix crash during mount udf: Prevent write-unsupported filesystem to be remounted read-write ext2: cache NULL when both default_acl and acl are NULL udf: remove unused variables group_start and nr_groups |
||
|
Linus Torvalds
|
79257514f5 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlvWyDMACgkQnJ2qBz9k QNnifgf+PXybPXX3KxtRUmK4u2zX2JMTwzuE0wmLxM6I08tf7rzLrBIbOY7iXka/ nzW6IK+KnA5HtPTEUbxqNBAvWpUAvPLZ/v20d0t/QTMJcz8yfhpvM9O2mjQAGMH8 EBmjjEhZaso8uOIAPhUg9um1QdQoYWa329fsoQuHor9kjKmDg+3RmtdH0jbRzQ6B RNAY1WNFbm+7MH7Fu3AB/jLqqkwZhoPcu7TwXP6m+va6xAvzEYUOQQB9rPEIaY2Z +q0B9LhwFIAnWPCI7dxw3CBTndoR2u1vkpnGw5FFhJgnMG4L1QMPoCCYPIZEIXg/ VuGZQ0/mayCtO+JWw+VDJF3jQFrHxA== =J6tx -----END PGP SIGNATURE----- Merge tag 'for_v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "Amir's patches to implement superblock fanotify watches, Xiaoming's patch to enable reporting of thread IDs in fanotify events instead of TGIDs (sadly the patch got mis-attributed to Amir and I've noticed only now), and a fix of possible oops on umount caused by fsnotify infrastructure" * tag 'for_v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: Fix busy inodes during unmount fs: group frequently accessed fields of struct super_block together fanotify: support reporting thread id instead of process id fanotify: add BUILD_BUG_ON() to count the bits of fanotify constants fsnotify: convert runtime BUG_ON() to BUILD_BUG_ON() fanotify: deprecate uapi FAN_ALL_* constants fanotify: simplify handling of FAN_ONDIR fsnotify: generalize handling of extra event flags fanotify: fix collision of internal and uapi mark flags fanotify: store fanotify_init() flags in group's fanotify_data fanotify: add API to attach/detach super block mark fsnotify: send path type events to group with super block marks fsnotify: add super block object type |
||
|
Linus Torvalds
|
7da4221b53 |
Pull request for inclusion in 4.20
* Finish removing the custom 9p request cache mechanism
* Embed part of the fcall in the request to have better slab
performance (msize usually is power of two aligned)
* syzkaller fixes:
- add a refcount to 9p requests to avoid use after free
- a few double free issues
* A few coverity fixes
* Some old patches that were in the bugzilla:
- do not trust pdu content for size header
- mount option for lock retry interval
----------------------------------------------------------------
Dan Carpenter (1):
9p: potential NULL dereference
Dinu-Razvan Chis-Serban (1):
9p locks: add mount option for lock retry interval
Dominique Martinet (12):
9p/xen: fix check for xenbus_read error in front_probe
v9fs_dir_readdir: fix double-free on p9stat_read error
9p: clear dangling pointers in p9stat_free
9p: embed fcall in req to round down buffer allocs
9p: add a per-client fcall kmem_cache
9p/rdma: do not disconnect on down_interruptible EAGAIN
9p: acl: fix uninitialized iattr access
9p/rdma: remove useless check in cm_event_handler
9p: p9dirent_read: check network-provided name length
9p locks: fix glock.client_id leak in do_lock
9p/trans_fd: abort p9_read_work if req status changed
9p/trans_fd: put worker reqs on destroy
Gertjan Halkes (1):
9p: do not trust pdu content for stat item size
Gustavo A. R. Silva (1):
9p: fix spelling mistake in fall-through annotation
Matthew Wilcox (2):
9p: Use a slab for allocating requests
9p: Remove p9_idpool
Tomas Bortoli (3):
9p: rename p9_free_req() function
9p: Add refcount to p9_req_t
9p: Rename req to rreq in trans_fd
fs/9p/acl.c | 2 +-
fs/9p/v9fs.c | 21 +++++
fs/9p/v9fs.h | 1 +
fs/9p/vfs_dir.c | 19 +---
fs/9p/vfs_file.c | 24 +++++-
include/net/9p/9p.h | 12 +--
include/net/9p/client.h | 71 ++++++---------
net/9p/Makefile | 1 -
net/9p/client.c | 551 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------------------------------
net/9p/mod.c | 9 +-
net/9p/protocol.c | 20 ++++-
net/9p/trans_fd.c | 64 +++++++++-----
net/9p/trans_rdma.c | 37 ++++----
net/9p/trans_virtio.c | 44 +++++++---
net/9p/trans_xen.c | 17 ++--
net/9p/util.c | 140 ------------------------------
16 files changed, 482 insertions(+), 551 deletions(-)
delete mode 100644 net/9p/util.c
-----BEGIN PGP SIGNATURE-----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=g1OF
-----END PGP SIGNATURE-----
Merge tag '9p-for-4.20' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"Highlights this time around are the end of Matthew's work to remove
the custom 9p request cache and use a slab directly for requests, with
some extra patches on my end to not degrade performance, but it's a
very good cleanup.
Tomas and I fixed a few more syzkaller bugs (refcount is the big one),
and I had a go at the coverity bugs and at some of the bugzilla
reports we had open for a while.
I'm a bit disappointed that I couldn't get much reviews for a few of
my own patches, but the big ones got some and it's all been soaking in
linux-next for quite a while so I think it should be OK.
Summary:
- Finish removing the custom 9p request cache mechanism
- Embed part of the fcall in the request to have better slab
performance (msize usually is power of two aligned)
- syzkaller fixes:
* add a refcount to 9p requests to avoid use after free
* a few double free issues
- A few coverity fixes
- Some old patches that were in the bugzilla:
* do not trust pdu content for size header
* mount option for lock retry interval"
* tag '9p-for-4.20' of git://github.com/martinetd/linux: (21 commits)
9p/trans_fd: put worker reqs on destroy
9p/trans_fd: abort p9_read_work if req status changed
9p: potential NULL dereference
9p locks: fix glock.client_id leak in do_lock
9p: p9dirent_read: check network-provided name length
9p/rdma: remove useless check in cm_event_handler
9p: acl: fix uninitialized iattr access
9p locks: add mount option for lock retry interval
9p: do not trust pdu content for stat item size
9p: Rename req to rreq in trans_fd
9p: fix spelling mistake in fall-through annotation
9p/rdma: do not disconnect on down_interruptible EAGAIN
9p: Add refcount to p9_req_t
9p: rename p9_free_req() function
9p: add a per-client fcall kmem_cache
9p: embed fcall in req to round down buffer allocs
9p: Remove p9_idpool
9p: Use a slab for allocating requests
9p: clear dangling pointers in p9stat_free
v9fs_dir_readdir: fix double-free on p9stat_read error
...
|
||
|
Linus Torvalds
|
673c790e72 |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68k nommu fix from Greg Ungerer: "Only a single change to fix an out of bounds array access when parsing boot command line" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix command-line parsing when passed from u-boot |
||
|
Linus Torvalds
|
83e7e5b544 |
m68k updates for v4.20
- Just two small cleanups. -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCW9WEMhUcZ2VlcnRAbGlu dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XCbswD+NNpRY9sDL686TicLAB8nnIIi7wzA eCgPpsXprxrRjEsA/3Wpsgnu32y6zDqh3UCFdPBnYUTj3ev1oxGdmzI3gJMG =y1Lq -----END PGP SIGNATURE----- Merge tag 'm68k-for-v4.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: "Just two small cleanups" * tag 'm68k-for-v4.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/sun3: Remove is_medusa and m68k_pgtable_cachemode m68k/atari: ARAnyM - Remove reference to long-deprecated MODULE_PARM |
||
|
Linus Torvalds
|
ac43507589 |
This tag contains the Linux port for C-SKY(csky) based on linux-4.19
Release, which has been through 10 rounds of review on mailing list. We almost got the Acked-by/Reviewed-by of all patches except "Process management and Signal", but all've been tested. Here is the LTP-20180118 test report: ----------------------------------------------- Total Tests: 1298 Total Skipped Tests: 281 Total Failures: 10 Kernel Version: 4.19.0+ Machine Architecture: csky Hostname: buildroot ----------------------------------------------- This patchset adds architecture support to Linux for C-SKY's 32-bit embedded There are two ABI versions with several CPU cores in this patchset: ABIv1: 610 (16-bit instruction, 32-bit data path, VIPT Cache ...) ABIv2: 807 810 860 (16/32-bit variable length instruction, PIPT Cache, SMP ...) More information: http://en.c-sky.com The development repo: https://github.com/c-sky/csky-linux ABI Documentation: https://github.com/c-sky/csky-doc Here is the pre-built cross compiler for fast test from our CI: https://gitlab.com/c-sky/buildroot/-/jobs/101608095/artifacts/file/output/images/csky_toolchain_qemu_csky_ck807f_4.18_glibc_defconfig_482b221e52908be1c9b2ccb444255e1562bb7025.tar.xz We use buildroot as our CI-test enviornment. "LTP, Lmbench ..." will be tested for every commit. See here for more details: https://gitlab.com/c-sky/buildroot/pipelines We'll continouslly improve csky subsystem in future. Changes in v10: - Remove duplicated headers in asm/Kbuild and uapi/asm/Kbuild. - Change to (__NR_arch_specific_syscall + 1) in unistd.h. - Drop dword access for get_user_size patch. - Involve the interrupt controller drivers after got Reviewed-by. Changes in v9: - Remove unused code in smp.c and use per_cpu for ipi_data. - Fixup r15 register access in abiv1/alignment.c. - Improve the changelog comment in commit-msg. Changes in v8: - Pass make allmodconfig. - Implement abiv1 get_user_dword(). - Remove set_irq_mapping() used by driver in smp.c. Changes in v7: - Use checkpatch.pl to check all patches and fixup as possible. - Remove github.com/c-sky print in bootup. - Give a return in DMA_ATTR_NON_CONSISTENT in csky_dma_alloc_atomic(). - Remove the NSIGXXX in fpu.c and use force_sig_fault() in fpu.c. - Remove irq.h and add it in asm/Kbuild. - Use byteswap helpers in abiv1/bswapXi.c. - Fixup arch_sync_dma() only with one page problem. Changes in v6: - use asm-generic/bitops/atomic.h for all in asm/bitops.h - fix flush_cache_range and tlb_start_vma - fix compile error with include linux/bug.h in cmpxchg.h - improve the comment Changes in v5: - remove redundant smp_mb operations in spinlock.h - add commit message for dt-bindings docs - add CPUHP_AP_CSKY_TIMER_STARTING in hotplug.h for csky_mptimer - add COMPILE_TEST for timer-gx6605s Kconfig - seperate csky two interrupt controllers with 2 patches - add MAINTAINERS patch for csky - move IPI_IRQ into csky_mptimer, fixup irq_mapping problem - coding convension Changes in v4: - cleanup defconfig - use ksys_ in syscall.c - remove wrong comment in vdso.c - Use GENERIC_IRQ_MULTI_HANDLER - optimize the memset.c - fixup dts warnings - remove big-endian in byteorder.h Changes in v3: dc560f1 csky: change to EM_CSKY 252 for elf.h 2ac3ddf csky: remove gx6605s.dts af00b8c csky: add defconfig and qemu.dts 6c87efb csky: remove the deprecate name. f6dda39 csky: add dt-bindings doc. d9f02a8 csky: remove KERNEL_VERSION in upstream branch 7bd663c csky: Use kernel/dma/noncoherent.c 1544c09 csky: bugfix emmc hang up LINS-976 e963271 csky: cleanup include/asm/Kbuild cd267ba csky: remove CSKY_DEBUG_INFO 78950da csky: remove dcache invalid. 13fe51d csky: remove csum_ipv6_magic(), use generic one. a7372db csky: bugfix CK810 access twice error. 1bb7c69 csky: bugfix add gcc asm memory for barrier. 5ea3257 csky: add -msoft-float instead of -mfloat-abi=soft. 38b037d csky: bugfix losing cache flush range. ab5e8c4 csky: Add ticket-spinlock and qrwlock support. c9aaec5 csky: rename cskyksyms.c to libgcc_ksyms.c 28c5e48 csky: avoid the MB on failure: trylock f929c97 csky: bugfix idly4 may cause exception. 09dc496 csky: Use GENERIC_ASHLDI3/ASHRDI3 etc 6ecc99d csky: optimize smp boot code. 16f50df csky: asm/bug.h simple implement. 0ba532a csky: csky asm/atomic.h added. df66947 csky: asm/compat.h added |
||
|
Linus Torvalds
|
9f51ae62c8 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) GRO overflow entries are not unlinked properly, resulting in list
poison pointers being dereferenced.
2) Fix bridge build with ipv6 disabled, from Nikolay Aleksandrov.
3) Direct packet access and other fixes in BPF from Daniel Borkmann.
4) gred_change_table_def() gets passed the wrong pointer, a pointer to
a set of unparsed attributes instead of the attribute itself. From
Jakub Kicinski.
5) Allow macsec device to be brought up even if it's lowerdev is down,
from Sabrina Dubroca.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: diag: document swapped src/dst in udp_dump_one.
macsec: let the administrator set UP state even if lowerdev is down
macsec: update operstate when lower device changes
net: sched: gred: pass the right attribute to gred_change_table_def()
ptp: drop redundant kasprintf() to create worker name
net: bridge: remove ipv6 zero address check in mcast queries
net: Properly unlink GRO packets on overflow.
bpf: fix wrong helper enablement in cgroup local storage
bpf: add bpf_jit_limit knob to restrict unpriv allocations
bpf: make direct packet write unclone more robust
bpf: fix leaking uninitialized memory on pop/peek helpers
bpf: fix direct packet write into pop/peek helpers
bpf: fix cg_skb types to hint access type in may_access_direct_pkt_data
bpf: fix direct packet access for flow dissector progs
bpf: disallow direct packet access for unpriv in cg_skb
bpf: fix test suite to enable all unpriv program types
bpf, btf: fix a missing check bug in btf_parse
selftests/bpf: add config fragments BPF_STREAM_PARSER and XDP_SOCKETS
bpf: devmap: fix wrong interface selection in notifier_call
|
||
|
Lorenzo Colitti
|
747569b0a7 |
net: diag: document swapped src/dst in udp_dump_one.
Since its inception, udp_dump_one has had a bug where userspace
needs to swap src and dst addresses and ports in order to find
the socket it wants. This is because it passes the socket source
address to __udp[46]_lib_lookup's saddr argument, but those
functions are intended to find local sockets matching received
packets, so saddr is the remote address, not the local address.
This can no longer be fixed for backwards compatibility reasons,
so add a brief comment explaining that this is the case. This
will avoid confusion and help ensure SOCK_DIAG implementations
of new protocols don't have the same problem.
Fixes:
|
||
|
David S. Miller
|
3bdf6bac58 |
Merge branch 'macsec-fixes'
Sabrina Dubroca says: ==================== macsec: linkstate fixes This series fixes issues with handling administrative and operstate of macsec devices. Radu Rendec proposed another version of the first patch [0] but I'd rather not follow the behavior of vlan devices, going with macvlan does instead. Patrick Talbert also reported the same issue to me. The second patch is a follow-up. The restriction on setting the device up is a bit unreasonable, and operstate provides the information we need in this case. [0] https://patchwork.ozlabs.org/patch/971374/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |