Useful macros will be used effectively elsewhere.
These will be utilized in subsequent patches.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-2-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All EtherAVB instances on R-Car Gen3/Gen4 SoCs support the RGMII
interface. In addition, the first two EtherAVB instances on R-Car V4M
also support the MII interface, but this is not yet supported by the
driver.
Add support for MII on R-Car Gen4 by adding an R-Car Gen4-specific EMAC
initialization function that selects the MII clock instead of the RGMII
clock when the PHY interface is MII. Note that all implementations of
EtherAVB on R-Car Gen4 SoCs have the APSR register, but only MII-capable
instances are documented to have the MIISELECT bit, which has a
documented value of zero when reserved.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/3a21d1d6680864aa85afff9260234c2b8054020a.1719234830.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This place is fetching the stats, u64_stats_update_begin()/end()
should not be used, and the fetcher of stats is in the same context
as the updater of the stats, so don't need any protection
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/20240621094552.53469-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems that there is no definition for config IP_GRE, and it is not a
dependency of other configs, so remove it.
linux$ find -name Kconfig | xargs grep "IP_GRE"
<-- nothing
There is a IPV6_GRE config defined in net/ipv6/Kconfig. It only depends
on NET_IPGRE_DEMUX but not IP_GRE.
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240624055539.2092322-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce an additional validation to ensure that the PPE index
is modified exclusively for mtk_eth ingress devices.
This primarily addresses the issue related
to WED operation with multiple PPEs.
Fixes: dee4dd10c7 ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs")
Signed-off-by: Elad Yifee <eladwf@gmail.com>
Link: https://lore.kernel.org/r/20240623175113.24437-1-eladwf@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
WOL modes such as magic-packet should be an OS policy.
By default, advertise supported modes and use ethtool to activate
the required mode.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend wake-on LAN support with an ARP packet.
Currently, if PHY supports WOL, ethtool ignores the modes supported
by MACB. This change extends the WOL modes with MACB supported modes.
Advertise wake-on LAN supported modes by default without relying on
dt node. By default, wake-on LAN will be in disabled state.
Using ethtool, users can enable/disable or choose packet types.
For wake-on LAN via ARP, ensure the IP address is assigned and
report an error otherwise.
Co-developed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # on SAMA7G5
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When GEM is used as a wake device, it is not mandatory for the RX DMA
to be active. The RX engine in IP only needs to receive and identify
a wake packet through an interrupt. The wake packet is of no further
significance; hence, it is not required to be copied into memory.
By disabling RX DMA during suspend, we can avoid unnecessary DMA
processing of any incoming traffic.
During suspend, perform either of the below operations:
- tie-off/dummy descriptor: Disable unused queues by connecting
them to a looped descriptor chain without free slots.
- queue disable: The newer IP version allows disabling individual queues.
Co-developed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # on SAMA7G5
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When (AF_UNIX, SOCK_STREAM) socket connect()s to a listening socket,
the listener's sk_peer_pid/sk_peer_cred are copied to the client in
copy_peercred().
Then, two sk_peer_locks are held there; one is client's and another
is listener's.
However, the latter is not needed because we hold the listner's
unix_state_lock() there and unix_listen() cannot update the cred
concurrently.
Let's drop the unnecessary spin_lock() and use the bare spin_lock()
for the client to protect concurrent read by getsockopt(SO_PEERCRED).
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When (AF_UNIX, SOCK_STREAM) socket connect()s to a listening socket,
the listener's sk_peer_pid/sk_peer_cred are copied to the client in
copy_peercred().
Then, the client's sk_peer_pid and sk_peer_cred are always NULL, so
we need not call put_pid() and put_cred() there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
init_peercred() is called in 3 places:
1. socketpair() : both sockets
2. connect() : child socket
3. listen() : listening socket
The first two need not hold sk_peer_lock because no one can
touch the socket.
Let's set cred/pid without holding lock for the two cases and
rename the old init_peercred() to update_peercred() to properly
reflect the use case.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While GC is cleaning up cyclic references by SCM_RIGHTS,
unix_collect_skb() collects skb in the socket's recvq.
If the socket is TCP_LISTEN, we need to collect skb in the
embryo's queue. Then, both the listener's recvq lock and
the embroy's one are held.
The locking is always done in the listener -> embryo order.
Let's define it as unix_recvq_lock_cmp_fn() instead of using
spin_lock_nested().
Note that the reverse order is defined for consistency.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 1971d13ffa ("af_unix: Suppress false-positive lockdep splat for
spin_lock() in __unix_gc().") added U_LOCK_GC_LISTENER for the old GC,
but it's no longer needed for the new GC.
Let's remove U_LOCK_GC_LISTENER and unix_state_lock_nested() as there's
no user.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sk_diag_dump_icons() acquires embryo's lock by unix_state_lock_nested()
to fetch its peer.
The embryo's ->peer is set to NULL only when its parent listener is
close()d. Then, unix_release_sock() is called for each embryo after
unlinking skb by skb_dequeue().
In sk_diag_dump_icons(), we hold the parent's recvq lock, so we need
not acquire unix_state_lock_nested(), and peer is always non-NULL.
Let's remove unnecessary unix_state_lock_nested() and non-NULL test
for peer.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sk_diag_dump_peer() and sk_diag_dump() call unix_state_lock() for
sock_i_ino() which reads SOCK_INODE(sk->sk_socket)->i_ino, but it's
protected by sk->sk_callback_lock.
Let's remove unnecessary unix_state_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While a SOCK_(STREAM|SEQPACKET) socket connect()s to another, we hold
two locks of them by unix_state_lock() and unix_state_lock_nested() in
unix_stream_connect().
Before unix_state_lock_nested(), the following is guaranteed by checking
sk->sk_state:
1. The first socket is TCP_LISTEN
2. The second socket is not the first one
3. Simultaneous connect() must fail
So, the client state can be TCP_CLOSE or TCP_LISTEN or TCP_ESTABLISHED.
Let's define the expected states as unix_state_lock_cmp_fn() instead of
using unix_state_lock_nested().
Note that 2. is detected by debug_spin_lock_before() and 3. cannot be
expressed as lock_cmp_fn.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a SOCK_(STREAM|SEQPACKET) socket connect()s to another one, we need
to lock the two sockets to check their states in unix_stream_connect().
We use unix_state_lock() for the server and unix_state_lock_nested() for
client with tricky sk->sk_state check to avoid deadlock.
The possible deadlock scenario are the following:
1) Self connect()
2) Simultaneous connect()
The former is simple, attempt to grab the same lock, and the latter is
AB-BA deadlock.
After the server's unix_state_lock(), we check the server socket's state,
and if it's not TCP_LISTEN, connect() fails with -EINVAL.
Then, we avoid the former deadlock by checking the client's state before
unix_state_lock_nested(). If its state is not TCP_LISTEN, we can make
sure that the client and the server are not identical based on the state.
Also, the latter deadlock can be avoided in the same way. Due to the
server sk->sk_state requirement, AB-BA deadlock could happen only with
TCP_LISTEN sockets. So, if the client's state is TCP_LISTEN, we can
give up the second lock to avoid the deadlock.
CPU 1 CPU 2 CPU 3
connect(A -> B) connect(B -> A) listen(A)
--- --- ---
unix_state_lock(B)
B->sk_state == TCP_LISTEN
READ_ONCE(A->sk_state) == TCP_CLOSE
^^^^^^^^^
ok, will lock A unix_state_lock(A)
.--------------' WRITE_ONCE(A->sk_state, TCP_LISTEN)
| unix_state_unlock(A)
|
| unix_state_lock(A)
| A->sk_sk_state == TCP_LISTEN
| READ_ONCE(B->sk_state) == TCP_LISTEN
v ^^^^^^^^^^
unix_state_lock_nested(A) Don't lock B !!
Currently, while checking the client's state, we also check if it's
TCP_ESTABLISHED, but this is unlikely and can be checked after we know
the state is not TCP_CLOSE.
Moreover, if it happens after the second lock, we now jump to the restart
label, but it's unlikely that the server is not found during the retry,
so the jump is mostly to revist the client state check.
Let's remove the retry logic and check the state against TCP_CLOSE first.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
unix_dgram_connect() and unix_dgram_{send,recv}msg() lock the socket
and peer in ascending order of the socket address.
Let's define the order as unix_state_lock_cmp_fn() instead of using
unix_state_lock_nested().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When created, AF_UNIX socket is put into net->unx.table.buckets[],
and the hash is stored in sk->sk_hash.
* unbound socket : 0 <= sk_hash <= UNIX_HASH_MOD
When bind() is called, the socket could be moved to another bucket.
* pathname socket : 0 <= sk_hash <= UNIX_HASH_MOD
* abstract socket : UNIX_HASH_MOD + 1 <= sk_hash <= UNIX_HASH_MOD * 2 + 1
Then, we call unix_table_double_lock() which locks a single bucket
or two.
Let's define the order as unix_table_lock_cmp_fn() instead of using
spin_lock_nested().
The locking is always done in ascending order of sk->sk_hash, which
is the index of buckets/locks array allocated by kvmalloc_array().
sk_hash_A < sk_hash_B
<=> &locks[sk_hash_A].dep_map < &locks[sk_hash_B].dep_map
So, the relation of two sk->sk_hash can be derived from the addresses
of dep_map in the array of locks.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The per-CPU flush lists, which are accessed from within the NAPI callback
(xdp_do_flush() for instance), are per-CPU. There are subject to the
same problem as struct bpf_redirect_info.
Add the per-CPU lists cpu_map_flush_list, dev_map_flush_list and
xskmap_map_flush_list to struct bpf_net_context. Add wrappers for the
access. The lists initialized on first usage (similar to
bpf_net_ctx_get_ri()).
Cc: "Björn Töpel" <bjorn@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-16-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The XDP redirect process is two staged:
- bpf_prog_run_xdp() is invoked to run a eBPF program which inspects the
packet and makes decisions. While doing that, the per-CPU variable
bpf_redirect_info is used.
- Afterwards xdp_do_redirect() is invoked and accesses bpf_redirect_info
and it may also access other per-CPU variables like xskmap_flush_list.
At the very end of the NAPI callback, xdp_do_flush() is invoked which
does not access bpf_redirect_info but will touch the individual per-CPU
lists.
The per-CPU variables are only used in the NAPI callback hence disabling
bottom halves is the only protection mechanism. Users from preemptible
context (like cpu_map_kthread_run()) explicitly disable bottom halves
for protections reasons.
Without locking in local_bh_disable() on PREEMPT_RT this data structure
requires explicit locking.
PREEMPT_RT has forced-threaded interrupts enabled and every
NAPI-callback runs in a thread. If each thread has its own data
structure then locking can be avoided.
Create a struct bpf_net_context which contains struct bpf_redirect_info.
Define the variable on stack, use bpf_net_ctx_set() to save a pointer to
it, bpf_net_ctx_clear() removes it again.
The bpf_net_ctx_set() may nest. For instance a function can be used from
within NET_RX_SOFTIRQ/ net_rx_action which uses bpf_net_ctx_set() and
NET_TX_SOFTIRQ which does not. Therefore only the first invocations
updates the pointer.
Use bpf_net_ctx_get_ri() as a wrapper to retrieve the current struct
bpf_redirect_info. The returned data structure is zero initialized to
ensure nothing is leaked from stack. This is done on first usage of the
struct. bpf_net_ctx_set() sets bpf_redirect_info::kern_flags to 0 to
note that initialisation is required. First invocation of
bpf_net_ctx_get_ri() will memset() the data structure and update
bpf_redirect_info::kern_flags.
bpf_redirect_info::nh is excluded from memset because it is only used
once BPF_F_NEIGH is set which also sets the nh member. The kern_flags is
moved past nh to exclude it from memset.
The pointer to bpf_net_context is saved task's task_struct. Using
always the bpf_net_context approach has the advantage that there is
almost zero differences between PREEMPT_RT and non-PREEMPT_RT builds.
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-15-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf_scratchpad is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use local_lock_nested_bh()
for locking. This change adds only lockdep coverage and does not alter
the functional behaviour for !PREEMPT_RT.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-14-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The access to seg6_bpf_srh_states is protected by disabling preemption.
Based on the code, the entry point is input_action_end_bpf() and
every other function (the bpf helper functions bpf_lwt_seg6_*()), that
is accessing seg6_bpf_srh_states, should be called from within
input_action_end_bpf().
input_action_end_bpf() accesses seg6_bpf_srh_states first at the top of
the function and then disables preemption. This looks wrong because if
preemption needs to be disabled as part of the locking mechanism then
the variable shouldn't be accessed beforehand.
Looking at how it is used via test_lwt_seg6local.sh then
input_action_end_bpf() is always invoked from softirq context. If this
is always the case then the preempt_disable() statement is superfluous.
If this is not always invoked from softirq then disabling only
preemption is not sufficient.
Replace the preempt_disable() statement with nested-BH locking. This is
not an equivalent replacement as it assumes that the invocation of
input_action_end_bpf() always occurs in softirq context and thus the
preempt_disable() is superfluous.
Add a local_lock_t the data structure and use local_lock_nested_bh() for
locking. Add lockdep_assert_held() to ensure the lock is held while the
per-CPU variable is referenced in the helper functions.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-13-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to explicitly disable migration if bottom halves are
also disabled. Disabling BH implies disabling migration.
Remove migrate_disable() and rely solely on disabling BH to remain on
the same CPU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-12-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
softnet_data::process_queue is a per-CPU variable and relies on disabled
BH for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
softnet_data::input_queue_head can be updated lockless. This is fine
because this value is only update CPU local by the local backlog_napi
thread.
Add a local_lock_t to softnet_data and use local_lock_nested_bh() for locking
of process_queue. This change adds only lockdep coverage and does not
alter the functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-11-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The backlog_napi locking (previously RPS) relies on explicit locking if
either RPS or backlog NAPI is enabled. If both are disabled then locking
was achieved by disabling interrupts except on PREEMPT_RT. PREEMPT_RT
was excluded because the needed synchronisation was already provided
local_bh_disable().
Since the introduction of backlog NAPI and making it mandatory for
PREEMPT_RT the ifdef within backlog_lock.*() is obsolete and can be
removed.
Remove the ifdefs in backlog_lock.*().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-10-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Softirq is preemptible on PREEMPT_RT. Without a per-CPU lock in
local_bh_disable() there is no guarantee that only one device is
transmitting at a time.
With preemption and multiple senders it is possible that the per-CPU
`recursion' counter gets incremented by different threads and exceeds
XMIT_RECURSION_LIMIT leading to a false positive recursion alert.
The `more' member is subject to similar problems if set by one thread
for one driver and wrongly used by another driver within another thread.
Instead of adding a lock to protect the per-CPU variable it is simpler
to make xmit per-task. Sending and receiving skbs happens always
in thread context anyway.
Having a lock to protected the per-CPU counter would block/ serialize two
sending threads needlessly. It would also require a recursive lock to
ensure that the owner can increment the counter further.
Make the softnet_data.xmit a task_struct member on PREEMPT_RT. Add
needed wrapper.
Cc: Ben Segall <bsegall@google.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-9-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
brnf_frag_data_storage is a per-CPU variable and relies on disabled BH
for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Add a local_lock_t to the data structure and use local_lock_nested_bh()
for locking. This change adds only lockdep coverage and does not alter
the functional behaviour for !PREEMPT_RT.
Cc: Florian Westphal <fw@strlen.de>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: bridge@lists.linux.dev
Cc: coreteam@netfilter.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-8-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv4_tcp_sk is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a sock member (original ipv4_tcp_sk) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-7-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sigpool_scratch is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a pad member (original sigpool_scratch) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-6-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
napi_alloc_cache is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use local_lock_nested_bh()
for locking. This change adds only lockdep coverage and does not alter
the functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-5-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The else condition within __netdev_alloc_frag_align() is an open coded
__napi_alloc_frag_align().
Use __napi_alloc_frag_align() instead of open coding it.
Move fragsz assignment before page_frag_alloc_align() invocation because
__napi_alloc_frag_align() also contains this statement.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-4-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add local_lock_nested_bh() locking. It is based on local_lock_t and the
naming follows the preempt_disable_nested() example.
For !PREEMPT_RT + !LOCKDEP it is a per-CPU annotation for locking
assumptions based on local_bh_disable(). The macro is optimized away
during compilation.
For !PREEMPT_RT + LOCKDEP the local_lock_nested_bh() is reduced to
the usual lock-acquire plus lockdep_assert_in_softirq() - ensuring that
BH is disabled.
For PREEMPT_RT local_lock_nested_bh() acquires the specified per-CPU
lock. It does not disable CPU migration because it relies on
local_bh_disable() disabling CPU migration.
With LOCKDEP it performans the usual lockdep checks as with !PREEMPT_RT.
Due to include hell the softirq check has been moved spinlock.c.
The intention is to use this locking in places where locking of a per-CPU
variable relies on BH being disabled. Instead of treating disabled
bottom halves as a big per-CPU lock, PREEMPT_RT can use this to reduce
the locking scope to what actually needs protecting.
A side effect is that it also documents the protection scope of the
per-CPU variables.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-3-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce lock guard definition for local_lock_t. There are no users
yet.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-2-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 243996d172 ("dt-bindings: net: Convert fsl-fman to yaml") splits
the previous dt text file into four yaml files. It adjusts a corresponding
file entry in MAINTAINERS from txt to yaml, but this adjustment misses
that the file was split and renamed.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Adjust the file entry to match the four yaml files resulting from this
commit above.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
ice: prepare representor for SF support
Michal Swiatkowski says:
This is a series to prepare port representor for supporting also
subfunctions. We need correct devlink locking and the possibility to
update parent VSI after port representor is created.
Refactor how devlink lock is taken to suite the subfunction use case.
VSI configuration needs to be done after port representor is created.
Port representor needs only allocated VSI. It doesn't need to be
configured before.
VSI needs to be reconfigured when update function is called.
The code for this patchset was split from (too big) patchset [1].
[1] https://lore.kernel.org/netdev/20240213072724.77275-1-michal.swiatkowski@linux.intel.com/
---
Originally from https://lore.kernel.org/netdev/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com/
Changes:
- delete ice_repr_get_by_vsi() from header
- rephrase commit message in moving devlink locking
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We support multicast addresses, so enable it by default.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmZ1MB4THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b+QQB/9wDkLdjgRsvI3c32IXxTrOmuX97Pm2
jYaHXmH1QkOKK0CXkPLEGjzpxSVXO6/d+ooeINkKmeF9VrtxxYWuE9pEsulyPz4y
dbeK5oAZdhtS6CEnArzbNHR6mdP1IcmJ3uKojsV71t+4GTdZw4WHe6LNgC4ua7n8
oYOpgbEV/YP/AyP8vO1L65M+tI69/0jeDpidtDQkNgWepE/Kh0W0ASfqjYrBgvZq
eycUmLTCigKNhG8fNJVHejyrnLynY2QBqwM7M5yYw1q8lX4W8Yf1y55VCqzPz63D
RiYVdVdG720jk9Ux9ZqxAKBPyzACnV6CG/MnzIgIdpV3O1aEf1WDkU2Y
=rRB9
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-06-21
The first 2 patches are by Andy Shevchenko, one cleans up the includes
in the mcp251x driver, the other one updates the sja100 plx_pci driver
to make use of predefines PCI subvendor ID.
Mans Rullgard's patch cleans up the Kconfig help text of for the slcan
driver.
Oliver Hartkopp provides a patch to update the documentation, which
removes the ISO 15675-2 specification version where possible.
The next 2 patches are by Harini T and update the documentation of the
xilinx_can driver.
Francesco Valla provides documentation for the ISO 15765-2 protocol.
A patch by Dr. David Alan Gilbert removes an unused struct from the
mscan driver.
12 patches are by Martin Jocic. The first three add support for 3 new
devices to the kvaser_usb driver. The remaining 9 first clean up the
kvaser_pciefd driver, and then add support for MSI.
Krzysztof Kozlowski contributes 3 patches simplifies the CAN SPI
drivers by making use of spi_get_device_match_data().
The last patch is by Martin Hundebøll, which reworks the m_can driver
to not enable the CAN transceiver during probe.
* tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (24 commits)
can: m_can: don't enable transceiver when probing
can: mcp251xfd: simplify with spi_get_device_match_data()
can: mcp251x: simplify with spi_get_device_match_data()
can: hi311x: simplify with spi_get_device_match_data()
can: kvaser_pciefd: Add MSI interrupts
can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR
can: kvaser_pciefd: Change name of return code variable
can: kvaser_pciefd: Rename board_irq to pci_irq
can: kvaser_pciefd: Add unlikely
can: kvaser_pciefd: Add inline
can: kvaser_pciefd: Remove unnecessary comment
can: kvaser_pciefd: Skip redundant NULL pointer check in ISR
can: kvaser_pciefd: Group #defines together
can: kvaser_usb: Add support for Kvaser Mini PCIe 1xCAN
can: kvaser_usb: Add support for Kvaser USBcan Pro 5xCAN
can: kvaser_usb: Add support for Vining 800
can: mscan: remove unused struct 'mscan_state'
Documentation: networking: document ISO 15765-2
can: xilinx_can: Document driver description to list all supported IPs
can: isotp: remove ISO 15675-2 specification version where possible
...
====================
Link: https://patch.msgid.link/20240621080201.305471-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of reset of VF VSI can be reallocated. To handle this case it
should be properly updated.
Reload representor as vsi->vsi_num can be different than the one stored
when representor was created.
Instead of only changing antispoof do whole VSI configuration for
eswitch.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is needed because subfunction port representor shouldn't configure
the source VSI during representor creation.
Move the code to separate function and call it only in case the VF port
representor is being created.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case of subfunction lock will be taken for whole port creation and
removing. Do the same in VF case.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is used to get representor structure during cleaning.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
amt.sh is written in bash, not sh.
So, shebang should be bash.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
