KVM_GENERIC_MEMORY_ATTRIBUTES requires the generic MMU notifier code, because
it uses kvm_mmu_invalidate_begin/end. However, it would not work with a bespoke
implementation of MMU notifiers that does not use KVM_GENERIC_MMU_NOTIFIER,
because most likely it would not synchronize correctly on invalidation. So
the right thing to do is to note the problematic configuration if the
architecture does not select itself KVM_GENERIC_MMU_NOTIFIER; not to
enable it blindly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.
These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".
Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.
Fixes: 8132d887a7 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/44907c6b-c5bd-4e4a-a921-e4d3825539d8@infradead.org/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
-----BEGIN PGP SIGNATURE-----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=FeiG
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.8-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZYCYmAAKCRCivnWIJHzd
FhU+AQDqIOIg3VMV+VjxhrG5aiHccq9o1mczO4LL9FQUO9AdYwD/SbTP4puBlfai
gOFQDuvJFogTwKmYPDO2jycp1ekTuQ0=
=RhfO
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 6.7, part #2
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
Instead of having a comment indicating the need to hold slots_lock
when calling kvm_io_bus_register_dev(), make it explicit with
a lockdep assertion.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231207151201.3028710-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Keep all #ifdef CONFIG_HAVE_KVM_IRQCHIP parts of eventfd.c together, and
compile out the irqfds field of struct kvm if the symbol is not defined.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The deprecated interfaces were removed 15 years ago. KVM's
device assignment was deprecated in 4.2 and removed 6.5 years
ago; the only interest might be in compiling ancient versions
of QEMU, but QEMU has been using its own imported copy of the
kernel headers since June 2011. So again we go into archaeology
territory; just remove the cruft.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All platforms with a kernel irqchip have support for irqfd. Unify the
two configuration items so that userspace can expect to use irqfd to
inject interrupts into the irqchip.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virt/kvm/eventfd.c is compiled unconditionally, meaning that the ioeventfds
member of struct kvm is accessed unconditionally. CONFIG_HAVE_KVM_EVENTFD
therefore must be defined for KVM common code to compile successfully,
remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With migration disabled, one function becomes unused:
virt/kvm/guest_memfd.c:262:12: error: 'kvm_gmem_migrate_folio' defined but not used [-Werror=unused-function]
262 | static int kvm_gmem_migrate_folio(struct address_space *mapping,
| ^~~~~~~~~~~~~~~~~~~~~~
Remove the #ifdef around the reference so that fallback_migrate_folio()
is never used. The gmem implementation of the hook is trivial; since
the gmem mapping is unmovable, the pages should not be migrated anyway.
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert KVM's misguided attempt to "fix" a use-after-module-unload bug that
was actually due to failure to flush a workqueue, not a lack of module
refcounting. Pinning the KVM module until kvm_vm_destroy() doesn't
prevent use-after-free due to the module being unloaded, as userspace can
invoke delete_module() the instant the last reference to KVM is put, i.e.
can cause all KVM code to be unmapped while KVM is actively executing said
code.
Generally speaking, the many instances of module_put(THIS_MODULE)
notwithstanding, outside of a few special paths, a module can never safely
put the last reference to itself without creating deadlock, i.e. something
external to the module *must* put the last reference. In other words,
having VMs grab a reference to the KVM module is futile, pointless, and as
evidenced by the now-reverted commit 70375c2d8f ("Revert "KVM: set owner
of cpu and vm file operations""), actively dangerous.
This reverts commit 405294f29f and commit
5f6de5cbeb.
Fixes: 405294f29f ("KVM: Unconditionally get a ref to /dev/kvm module when creating a VM")
Fixes: 5f6de5cbeb ("KVM: Prevent module exit until all VMs are freed")
Link: https://lore.kernel.org/r/20231018204624.1905300-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set .owner for all KVM-owned filed types so that the KVM module is pinned
until any files with callbacks back into KVM are completely freed. Using
"struct kvm" as a proxy for the module, i.e. keeping KVM-the-module alive
while there are active VMs, doesn't provide full protection.
Userspace can invoke delete_module() the instant the last reference to KVM
is put. If KVM itself puts the last reference, e.g. via kvm_destroy_vm(),
then it's possible for KVM to be preempted and deleted/unloaded before KVM
fully exits, e.g. when the task running kvm_destroy_vm() is scheduled back
in, it will jump to a code page that is no longer mapped.
Note, file types that can call into sub-module code, e.g. kvm-intel.ko or
kvm-amd.ko on x86, must use the module pointer passed to kvm_init(), not
THIS_MODULE (which points at kvm.ko). KVM assumes that if /dev/kvm is
reachable, e.g. VMs are active, then the vendor module is loaded.
To reduce the probability of forgetting to set .owner entirely, use
THIS_MODULE for stats files where KVM does not call back into vendor code.
This reverts commit 70375c2d8f, and fixes
several other file types that have been buggy since their introduction.
Fixes: 70375c2d8f ("Revert "KVM: set owner of cpu and vm file operations"")
Fixes: 3bcd0662d6 ("KVM: X86: Introduce mmu_rmaps_stat per-vm debugfs file")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20231010003746.GN800259@ZenIV
Link: https://lore.kernel.org/r/20231018204624.1905300-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
kvm_main.c utilizes vmemdup_user() and array_size() to copy a userspace
array. Currently, this does not check for an overflow.
Use the new wrapper vmemdup_array_user() to copy the array more safely.
Note, KVM explicitly checks the number of entries before duplicating the
array, i.e. adding the overflow check should be a glorified nop.
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20231102181526.43279-4-pstanner@redhat.com
[sean: call out that KVM pre-checks the number of entries]
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM_CAP_DEVICE_CTRL allows userspace to check if the kvm_device
framework (e.g. KVM_CREATE_DEVICE) is supported by KVM. Move
KVM_CAP_DEVICE_CTRL to the generic check for the two reasons:
1) it already supports arch agnostic usages (i.e. KVM_DEV_TYPE_VFIO).
For example, userspace VFIO implementation may needs to create
KVM_DEV_TYPE_VFIO on x86, riscv, or arm etc. It is simpler to have it
checked at the generic code than at each arch's code.
2) KVM_CREATE_DEVICE has been added to the generic code.
Link: https://lore.kernel.org/all/20221215115207.14784-1-wei.w.wang@intel.com
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Acked-by: Anup Patel <anup@brainfault.org> (riscv)
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230315101606.10636-1-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ever since the eventfd type was introduced back in 2007 in commit
e1ad7468c7 ("signal/timer/event: eventfd core") the eventfd_signal()
function only ever passed 1 as a value for @n. There's no point in
keeping that additional argument.
Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Acked-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU").
The fixup will be done as part of the merge commit, and most of the text
above will become the commit message for the merge.
Pending post-merge work includes:
- hugepage support
- looking into using the restrictedmem framework for guest memory
- introducing a testing mechanism to poison memory, possibly using
the same memory attributes introduced here
- SNP and TDX support
There are two non-KVM patches buried in the middle of this series:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
Add a new x86 VM type, KVM_X86_SW_PROTECTED_VM, to serve as a development
and testing vehicle for Confidential (CoCo) VMs, and potentially to even
become a "real" product in the distant future, e.g. a la pKVM.
The private memory support in KVM x86 is aimed at AMD's SEV-SNP and
Intel's TDX, but those technologies are extremely complex (understatement),
difficult to debug, don't support running as nested guests, and require
hardware that's isn't universally accessible. I.e. relying SEV-SNP or TDX
for maintaining guest private memory isn't a realistic option.
At the very least, KVM_X86_SW_PROTECTED_VM will enable a variety of
selftests for guest_memfd and private memory support without requiring
unique hardware.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231027182217.3615211-24-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let x86 track the number of address spaces on a per-VM basis so that KVM
can disallow SMM memslots for confidential VMs. Confidentials VMs are
fundamentally incompatible with emulating SMM, which as the name suggests
requires being able to read and write guest memory and register state.
Disallowing SMM will simplify support for guest private memory, as KVM
will not need to worry about tracking memory attributes for multiple
address spaces (SMM is the only "non-default" address space across all
architectures).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-23-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce an ioctl(), KVM_CREATE_GUEST_MEMFD, to allow creating file-based
memory that is tied to a specific KVM virtual machine and whose primary
purpose is to serve guest memory.
A guest-first memory subsystem allows for optimizations and enhancements
that are kludgy or outright infeasible to implement/support in a generic
memory subsystem. With guest_memfd, guest protections and mapping sizes
are fully decoupled from host userspace mappings. E.g. KVM currently
doesn't support mapping memory as writable in the guest without it also
being writable in host userspace, as KVM's ABI uses VMA protections to
define the allow guest protection. Userspace can fudge this by
establishing two mappings, a writable mapping for the guest and readable
one for itself, but that’s suboptimal on multiple fronts.
Similarly, KVM currently requires the guest mapping size to be a strict
subset of the host userspace mapping size, e.g. KVM doesn’t support
creating a 1GiB guest mapping unless userspace also has a 1GiB guest
mapping. Decoupling the mappings sizes would allow userspace to precisely
map only what is needed without impacting guest performance, e.g. to
harden against unintentional accesses to guest memory.
Decoupling guest and userspace mappings may also allow for a cleaner
alternative to high-granularity mappings for HugeTLB, which has reached a
bit of an impasse and is unlikely to ever be merged.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to mmap() guest memory).
More immediately, being able to map memory into KVM guests without mapping
said memory into the host is critical for Confidential VMs (CoCo VMs), the
initial use case for guest_memfd. While AMD's SEV and Intel's TDX prevent
untrusted software from reading guest private data by encrypting guest
memory with a key that isn't usable by the untrusted host, projects such
as Protected KVM (pKVM) provide confidentiality and integrity *without*
relying on memory encryption. And with SEV-SNP and TDX, accessing guest
private memory can be fatal to the host, i.e. KVM must be prevent host
userspace from accessing guest memory irrespective of hardware behavior.
Attempt #1 to support CoCo VMs was to add a VMA flag to mark memory as
being mappable only by KVM (or a similarly enlightened kernel subsystem).
That approach was abandoned largely due to it needing to play games with
PROT_NONE to prevent userspace from accessing guest memory.
Attempt #2 to was to usurp PG_hwpoison to prevent the host from mapping
guest private memory into userspace, but that approach failed to meet
several requirements for software-based CoCo VMs, e.g. pKVM, as the kernel
wouldn't easily be able to enforce a 1:1 page:guest association, let alone
a 1:1 pfn:gfn mapping. And using PG_hwpoison does not work for memory
that isn't backed by 'struct page', e.g. if devices gain support for
exposing encrypted memory regions to guests.
Attempt #3 was to extend the memfd() syscall and wrap shmem to provide
dedicated file-based guest memory. That approach made it as far as v10
before feedback from Hugh Dickins and Christian Brauner (and others) led
to it demise.
Hugh's objection was that piggybacking shmem made no sense for KVM's use
case as KVM didn't actually *want* the features provided by shmem. I.e.
KVM was using memfd() and shmem to avoid having to manage memory directly,
not because memfd() and shmem were the optimal solution, e.g. things like
read/write/mmap in shmem were dead weight.
Christian pointed out flaws with implementing a partial overlay (wrapping
only _some_ of shmem), e.g. poking at inode_operations or super_operations
would show shmem stuff, but address_space_operations and file_operations
would show KVM's overlay. Paraphrashing heavily, Christian suggested KVM
stop being lazy and create a proper API.
Link: https://lore.kernel.org/all/20201020061859.18385-1-kirill.shutemov@linux.intel.com
Link: https://lore.kernel.org/all/20210416154106.23721-1-kirill.shutemov@linux.intel.com
Link: https://lore.kernel.org/all/20210824005248.200037-1-seanjc@google.com
Link: https://lore.kernel.org/all/20211111141352.26311-1-chao.p.peng@linux.intel.com
Link: https://lore.kernel.org/all/20221202061347.1070246-1-chao.p.peng@linux.intel.com
Link: https://lore.kernel.org/all/ff5c5b97-acdf-9745-ebe5-c6609dd6322e@google.com
Link: https://lore.kernel.org/all/20230418-anfallen-irdisch-6993a61be10b@brauner
Link: https://lore.kernel.org/all/ZEM5Zq8oo+xnApW9@google.com
Link: https://lore.kernel.org/linux-mm/20230306191944.GA15773@monkey
Link: https://lore.kernel.org/linux-mm/ZII1p8ZHlHaQ3dDl@casper.infradead.org
Cc: Fuad Tabba <tabba@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Maciej Szmigiero <mail@maciej.szmigiero.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Wang <wei.w.wang@intel.com>
Cc: Liam Merwick <liam.merwick@oracle.com>
Cc: Isaku Yamahata <isaku.yamahata@gmail.com>
Co-developed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Co-developed-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Co-developed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-17-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In confidential computing usages, whether a page is private or shared is
necessary information for KVM to perform operations like page fault
handling, page zapping etc. There are other potential use cases for
per-page memory attributes, e.g. to make memory read-only (or no-exec,
or exec-only, etc.) without having to modify memslots.
Introduce the KVM_SET_MEMORY_ATTRIBUTES ioctl, advertised by
KVM_CAP_MEMORY_ATTRIBUTES, to allow userspace to set the per-page memory
attributes to a guest memory range.
Use an xarray to store the per-page attributes internally, with a naive,
not fully optimized implementation, i.e. prioritize correctness over
performance for the initial implementation.
Use bit 3 for the PRIVATE attribute so that KVM can use bits 0-2 for RWX
attributes/protections in the future, e.g. to give userspace fine-grained
control over read, write, and execute protections for guest memory.
Provide arch hooks for handling attribute changes before and after common
code sets the new attributes, e.g. x86 will use the "pre" hook to zap all
relevant mappings, and the "post" hook to track whether or not hugepages
can be used to map the range.
To simplify the implementation wrap the entire sequence with
kvm_mmu_invalidate_{begin,end}() even though the operation isn't strictly
guaranteed to be an invalidation. For the initial use case, x86 *will*
always invalidate memory, and preventing arch code from creating new
mappings while the attributes are in flux makes it much easier to reason
about the correctness of consuming attributes.
It's possible that future usages may not require an invalidation, e.g.
if KVM ends up supporting RWX protections and userspace grants _more_
protections, but again opt for simplicity and punt optimizations to
if/when they are needed.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com
Cc: Fuad Tabba <tabba@google.com>
Cc: Xu Yilun <yilun.xu@intel.com>
Cc: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the .on_unlock() mmu_notifer hook now that it's no longer used for
notifying arch code that memory has been reclaimed. Adding .on_unlock()
and invoking it *after* dropping mmu_lock was a terrible idea, as doing so
resulted in .on_lock() and .on_unlock() having divergent and asymmetric
behavior, and set future developers up for failure, i.e. all but asked for
bugs where KVM relied on using .on_unlock() to try to run a callback while
holding mmu_lock.
Opportunistically add a lockdep assertion in kvm_mmu_invalidate_end() to
guard against future bugs of this nature.
Reported-by: Isaku Yamahata <isaku.yamahata@intel.com>
Link: https://lore.kernel.org/all/20230802203119.GB2021422@ls.amr.corp.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle AMD SEV's kvm_arch_guest_memory_reclaimed() hook by having
__kvm_handle_hva_range() return whether or not an overlapping memslot
was found, i.e. mmu_lock was acquired. Using the .on_unlock() hook
works, but kvm_arch_guest_memory_reclaimed() needs to run after dropping
mmu_lock, which makes .on_lock() and .on_unlock() asymmetrical.
Use a small struct to return the tuple of the notifier-specific return,
plus whether or not overlap was found. Because the iteration helpers are
__always_inlined, practically speaking, the struct will never actually be
returned from a function call (not to mention the size of the struct will
be two bytes in practice).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a "version 2" of KVM_SET_USER_MEMORY_REGION so that additional
information can be supplied without setting userspace up to fail. The
padding in the new kvm_userspace_memory_region2 structure will be used to
pass a file descriptor in addition to the userspace_addr, i.e. allow
userspace to point at a file descriptor and map memory into a guest that
is NOT mapped into host userspace.
Alternatively, KVM could simply add "struct kvm_userspace_memory_region2"
without a new ioctl(), but as Paolo pointed out, adding a new ioctl()
makes detection of bad flags a bit more robust, e.g. if the new fd field
is guarded only by a flag and not a new ioctl(), then a userspace bug
(setting a "bad" flag) would generate out-of-bounds access instead of an
-EINVAL error.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-9-seanjc@google.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert KVM_ARCH_WANT_MMU_NOTIFIER into a Kconfig and select it where
appropriate to effectively maintain existing behavior. Using a proper
Kconfig will simplify building more functionality on top of KVM's
mmu_notifier infrastructure.
Add a forward declaration of kvm_gfn_range to kvm_types.h so that
including arch/powerpc/include/asm/kvm_ppc.h's with CONFIG_KVM=n doesn't
generate warnings due to kvm_gfn_range being undeclared. PPC defines
hooks for PR vs. HV without guarding them via #ifdeffery, e.g.
bool (*unmap_gfn_range)(struct kvm *kvm, struct kvm_gfn_range *range);
bool (*age_gfn)(struct kvm *kvm, struct kvm_gfn_range *range);
bool (*test_age_gfn)(struct kvm *kvm, struct kvm_gfn_range *range);
bool (*set_spte_gfn)(struct kvm *kvm, struct kvm_gfn_range *range);
Alternatively, PPC could forward declare kvm_gfn_range, but there's no
good reason not to define it in common KVM.
Acked-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an assertion that there are no in-progress MMU invalidations when a
VM is being destroyed, with the exception of the scenario where KVM
unregisters its MMU notifier between an .invalidate_range_start() call and
the corresponding .invalidate_range_end().
KVM can't detect unpaired calls from the mmu_notifier due to the above
exception waiver, but the assertion can detect KVM bugs, e.g. such as the
bug that *almost* escaped initial guest_memfd development.
Link: https://lore.kernel.org/all/e397d30c-c6af-e68f-d18e-b4e3739c5389@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently in mmu_notifier invalidate path, hva range is recorded and then
checked against by mmu_invalidate_retry_hva() in the page fault handling
path. However, for the soon-to-be-introduced private memory, a page fault
may not have a hva associated, checking gfn(gpa) makes more sense.
For existing hva based shared memory, gfn is expected to also work. The
only downside is when aliasing multiple gfns to a single hva, the
current algorithm of checking multiple ranges could result in a much
larger range being rejected. Such aliasing should be uncommon, so the
impact is expected small.
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
[sean: convert vmx_set_apic_access_page_addr() to gfn-based API]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Message-Id: <20231027182217.3615211-4-seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the assertion on the in-progress invalidation count from the primary
MMU's notifier path to KVM's common notification path, i.e. assert that
the count doesn't go negative even when the invalidation is coming from
KVM itself.
Opportunistically convert the assertion to a KVM_BUG_ON(), i.e. kill only
the affected VM, not the entire kernel. A corrupted count is fatal to the
VM, e.g. the non-zero (negative) count will cause mmu_invalidate_retry()
to block any and all attempts to install new mappings. But it's far from
guaranteed that an end() without a start() is fatal or even problematic to
anything other than the target VM, e.g. the underlying bug could simply be
a duplicate call to end(). And it's much more likely that a missed
invalidation, i.e. a potential use-after-free, would manifest as no
notification whatsoever, not an end() without a start().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-3-seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework and rename "struct kvm_hva_range" into "kvm_mmu_notifier_range" so
that the structure can be used to handle notifications that operate on gfn
context, i.e. that aren't tied to a host virtual address. Rename the
handler typedef too (arguably it should always have been gfn_handler_t).
Practically speaking, this is a nop for 64-bit kernels as the only
meaningful change is to store start+end as u64s instead of unsigned longs.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-2-seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
- Drop unused function declarations
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmTudpYSHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5xJUQAKnMVEV+7gRtfV5KCJFRTNAMxo4zSIt/
K6QX+x/SwUriXj4nTAlvAtju1xz4nwTYBABKj3bXEaLpVjIUIbnEzEGuTKKK6XY9
UyJKVgafwLuKLWPYN/5Zv5SCO7DmVC9W3lVMtchgt7gFcRxtZhmEn53boHhrhan0
/2L5XD6N9rd81Zmd/rQkJNRND7XY3HkvDSnfmsRI/rfFUglCUHBDp4c2Wkmz+Dnb
ux7N37si5OTbRVp18VzbLg1jalstDEm36ZQ7tLkvIbNbZV6pV93/ZmcTmsOruTeN
gHVr6/RXmKKwgO3wtZ9DKL6oMcoh20yoT+vqhbaihVssLPGPusk7S2cCQ7529u8/
Oda+w67MMdbE46N9CmB56fkpwNvn9nLCoQFhMhXBWhPJVNmorpiR6drHKqLy5zCq
lrsWGqXU/DXA2PwdsztfIIMVeALawzExHu9ayppcKwb4S8TLJhLma7dT+EvwUxuV
hoswaIT7Tq2ptZ34Fo5/vEz+90u2wi7LynHrNdTs7NLsW+WI/jab7KxKc+mf5WYh
KuMzqmmPXmWRFupFeDa61YY5PCvMddDeac/jCYL/2cr73RA8bUItivwt5mEg5nOW
9NEU+cLbl1s8g2KfxwhvodVkbhiNGf8MkVpE5skHHh9OX8HYzZUa/s6uUZO1O0eh
XOk+fa9KWabt
=n819
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.6' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.6:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
- Drop unused function declarations
- Add support for TLB range invalidation of Stage-2 page tables,
avoiding unnecessary invalidations. Systems that do not implement
range invalidation still rely on a full invalidation when dealing
with large ranges.
- Add infrastructure for forwarding traps taken from a L2 guest to
the L1 guest, with L0 acting as the dispatcher, another baby step
towards the full nested support.
- Simplify the way we deal with the (long deprecated) 'CPU target',
resulting in a much needed cleanup.
- Fix another set of PMU bugs, both on the guest and host sides,
as we seem to never have any shortage of those...
- Relax the alignment requirements of EL2 VA allocations for
non-stack allocations, as we were otherwise wasting a lot of that
precious VA space.
- The usual set of non-functional cleanups, although I note the lack
of spelling fixes...
-----BEGIN PGP SIGNATURE-----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=DKhx
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.6
- Add support for TLB range invalidation of Stage-2 page tables,
avoiding unnecessary invalidations. Systems that do not implement
range invalidation still rely on a full invalidation when dealing
with large ranges.
- Add infrastructure for forwarding traps taken from a L2 guest to
the L1 guest, with L0 acting as the dispatcher, another baby step
towards the full nested support.
- Simplify the way we deal with the (long deprecated) 'CPU target',
resulting in a much needed cleanup.
- Fix another set of PMU bugs, both on the guest and host sides,
as we seem to never have any shortage of those...
- Relax the alignment requirements of EL2 VA allocations for
non-stack allocations, as we were otherwise wasting a lot of that
precious VA space.
- The usual set of non-functional cleanups, although I note the lack
of spelling fixes...
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is intended
to be the native uAPI for use with IOMMUFD. (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage.
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires. (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed Services
Card (PDS) Ethernet device, supporting live migration. (Brett Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code. (Li Zetao)
- Fix uninitialized hole in data structure and pad capability structures
for alignment. (Stefan Hajnoczi)
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmTvnDUbHGFsZXgud2ls
bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsimEEP/AzG+VRcu5LfYbLGLe0z
zB8ts6G7S78wXlmfN/LYi3v92XWvMMcm+vYF8oNAMfr1YL5sibWN6UtQfY1KCr7h
nWKdQdqjajJ5yDDZnOFdhqHJGNfmZw6+fey8Z0j8zRI2oymK4DncWWX3g/7L1SNr
9tIexGJef+mOdAmC94yOut3YviAaZ+f95T/xrdXHzzoNr50DD0+PD6AJdKJfKggP
vhiC/DAYH3Fofaa6tRasgWuKCYWdjZLR/kxgNpeEmW6kZnbq/dnzZ+kgn4HH1f9G
8p7UKVARR6FfG5aLheWu6Y9PDaKnfnqu8y/hobuE/ivXcmqqK+a6xSxrjgbVs8WJ
94SYnTBRoTlDJaKWa7GxqdgzJnV+s5ZyAgPhjzdi6mLTPWGzkuLhFWGtYL+LZAQ6
pNeZSM6CFBk+bva/xT0nNPCXxPh+/j/Y0G18FREj8aPFc03HrJQqz0RLydvTnoDz
nX/by5KdzMSVSVLPr4uDMtAsgxsGqWiFcp7QMw1HhhlLWxqmYbA+mLZaqyMZUUOx
6b/P8WXT9P2I+qPVKWQ5CWyqpsEqm6P+72yg6LOM9kINvgwDhOa7cagMXIuMWYMH
Rf97FL+K8p1eIy6AnvRHgFBMM5185uG+0YcJyVqtucDr/k8T/Om6ujAI6JbWtNe6
cLgaVAqKOYqCR4HC9bfVGSbd
=eKSR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
KVM is *the* case we know that really wants to honor NUMA hinting falls.
As we want to stop setting FOLL_HONOR_NUMA_FAULT implicitly, set
FOLL_HONOR_NUMA_FAULT whenever we might obtain pages on behalf of a VCPU
to map them into a secondary MMU, and add a comment why.
Do that unconditionally in hva_to_pfn_slow() when calling
get_user_pages_unlocked().
kvmppc_book3s_instantiate_page(), hva_to_pfn_fast() and
gfn_to_page_many_atomic() are similarly used to map pages into a
secondary MMU. However, FOLL_WRITE and get_user_page_fast_only() always
implicitly honor NUMA hinting faults -- as documented for
FOLL_HONOR_NUMA_FAULT -- so we can limit this change to a single location
for now.
Don't set it in check_user_page_hwpoison(), where we really only want to
check if the mapped page is HW-poisoned.
We won't set it for other KVM users of get_user_pages()/pin_user_pages()
* arch/powerpc/kvm/book3s_64_mmu_hv.c: not used to map pages into a
secondary MMU.
* arch/powerpc/kvm/e500_mmu.c: only used on shared TLB pages with userspace
* arch/s390/kvm/*: s390x only supports a single NUMA node either way
* arch/x86/kvm/svm/sev.c: not used to map pages into a secondary MMU.
This is a preparation for making FOLL_HONOR_NUMA_FAULT no longer
implicitly be set by get_user_pages() and friends.
Link: https://lkml.kernel.org/r/20230803143208.383663-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: liubo <liubo254@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wrap kvm_{gfn,hva}_range.pte in a union so that future notifier events can
pass event specific information up and down the stack without needing to
constantly expand and churn the APIs. Lockless aging of SPTEs will pass
around a bitmap, and support for memory attributes will pass around the
new attributes for the range.
Add a "KVM_NO_ARG" placeholder to simplify handling events without an
argument (creating a dummy union variable is midly annoying).
Opportunstically drop explicit zero-initialization of the "pte" field, as
omitting the field (now a union) has the same effect.
Cc: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/all/CAOUHufagkd2Jk3_HrVoFFptRXM=hX2CV8f+M-dka-hJU4bP8kw@mail.gmail.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/r/20230729004144.1054885-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move kvm_arch_flush_remote_tlbs_memslot() to common code and drop
"arch_" from the name. kvm_arch_flush_remote_tlbs_memslot() is just a
range-based TLB invalidation where the range is defined by the memslot.
Now that kvm_flush_remote_tlbs_range() can be called from common code we
can just use that and drop a bunch of duplicate code from the arch
directories.
Note this adds a lockdep assertion for slots_lock being held when
calling kvm_flush_remote_tlbs_memslot(), which was previously only
asserted on x86. MIPS has calls to kvm_flush_remote_tlbs_memslot(),
but they all hold the slots_lock, so the lockdep assertion continues to
hold true.
Also drop the CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT ifdef gating
kvm_flush_remote_tlbs_memslot(), since it is no longer necessary.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-7-rananta@google.com
Make kvm_flush_remote_tlbs_range() visible in common code and create a
default implementation that just invalidates the whole TLB.
This paves the way for several future features/cleanups:
- Introduction of range-based TLBI on ARM.
- Eliminating kvm_arch_flush_remote_tlbs_memslot()
- Moving the KVM/x86 TDP MMU to common code.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-6-rananta@google.com
kvm_arch_flush_remote_tlbs() or CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL
are two mechanisms to solve the same problem, allowing
architecture-specific code to provide a non-IPI implementation of
remote TLB flushing.
Dropping CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL allows KVM to standardize
all architectures on kvm_arch_flush_remote_tlbs() instead of
maintaining two mechanisms.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-5-rananta@google.com
Rename kvm_arch_flush_remote_tlb() and the associated macro
__KVM_HAVE_ARCH_FLUSH_REMOTE_TLB to kvm_arch_flush_remote_tlbs() and
__KVM_HAVE_ARCH_FLUSH_REMOTE_TLBS respectively.
Making the name plural matches kvm_flush_remote_tlbs() and makes it more
clear that this function can affect more than one remote TLB.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-2-rananta@google.com
Stop taking kv->lock mutex in kvm_vfio_update_coherency() and instead
call it with this mutex held: the callers of the function usually
already have it taken (and released) before calling
kvm_vfio_update_coherency(). This avoid bouncing the lock up and down.
The exception is kvm_vfio_release() where we do not take the lock, but
it is being executed when the very last reference to kvm_device is being
dropped, so there are no concerns about concurrency.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230714224538.404793-2-dmitry.torokhov@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
kvm_vfio_group_add() creates kvg instance, links it to kv->group_list,
and calls kvm_vfio_file_set_kvm() with kvg->file as an argument after
dropping kv->lock. If we race group addition and deletion calls, kvg
instance may get freed by the time we get around to calling
kvm_vfio_file_set_kvm().
Previous iterations of the code did not reference kvg->file outside of
the critical section, but used a temporary variable. Still, they had
similar problem of the file reference being owned by kvg structure and
potential for kvm_vfio_group_del() dropping it before
kvm_vfio_group_add() had a chance to complete.
Fix this by moving call to kvm_vfio_file_set_kvm() under the protection
of kv->lock. We already call it while holding the same lock when vfio
group is being deleted, so it should be safe here as well.
Fixes: 2fc1bec158 ("kvm: set/clear kvm to/from vfio_group when group add/delete")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230714224538.404793-1-dmitry.torokhov@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Grab a reference to KVM prior to installing VM and vCPU stats file
descriptors to ensure the underlying VM and vCPU objects are not freed
until the last reference to any and all stats fds are dropped.
Note, the stats paths manually invoke fd_install() and so don't need to
grab a reference before creating the file.
Fixes: ce55c04945 ("KVM: stats: Support binary stats retrieval for a VCPU")
Fixes: fcfe1baedd ("KVM: stats: Support binary stats retrieval for a VM")
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Closes: https://lore.kernel.org/all/CAC_GQSr3xzZaeZt85k_RCBd5kfiOve8qXo7a81Cq53LuVQ5r=Q@mail.gmail.com
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <20230711230131.648752-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This defines KVM_DEV_VFIO_FILE* and make alias with KVM_DEV_VFIO_GROUP*.
Old userspace uses KVM_DEV_VFIO_GROUP* works as well.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-6-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This renames kvm_vfio_group related helpers to prepare for accepting
vfio device fd. No functional change is intended.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-5-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This prepares for making the below kAPIs to accept both group file
and device file instead of only vfio group file.
bool vfio_file_enforced_coherent(struct file *file);
void vfio_file_set_kvm(struct file *file, struct kvm *kvm);
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the stage-2
fault path.
* Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
* Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
* Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
* Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
* Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
* Ensure timer IRQs are consistently released in the init failure
paths.
* Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
* Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
RISC-V:
* Redirect AMO load/store misaligned traps to KVM guest
* Trap-n-emulate AIA in-kernel irqchip for KVM guest
* Svnapot support for KVM Guest
s390:
* New uvdevice secret API
* CMM selftest and fixes
* fix racy access to target CPU for diag 9c
x86:
* Fix missing/incorrect #GP checks on ENCLS
* Use standard mmu_notifier hooks for handling APIC access page
* Drop now unnecessary TR/TSS load after VM-Exit on AMD
* Print more descriptive information about the status of SEV and SEV-ES during
module load
* Add a test for splitting and reconstituting hugepages during and after
dirty logging
* Add support for CPU pinning in demand paging test
* Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes
included along the way
* Add a "nx_huge_pages=never" option to effectively avoid creating NX hugepage
recovery threads (because nx_huge_pages=off can be toggled at runtime)
* Move handling of PAT out of MTRR code and dedup SVM+VMX code
* Fix output of PIC poll command emulation when there's an interrupt
* Add a maintainer's handbook to document KVM x86 processes, preferred coding
style, testing expectations, etc.
* Misc cleanups, fixes and comments
Generic:
* Miscellaneous bugfixes and cleanups
Selftests:
* Generate dependency files so that partial rebuilds work as expected
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSgHrIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroORcAf+KkBlXwQMf+Q0Hy6Mfe0OtkKmh0Ae
6HJ6dsuMfOHhWv5kgukh+qvuGUGzHq+gpVKmZg2yP3h3cLHOLUAYMCDm+rjXyjsk
F4DbnJLfxq43Pe9PHRKFxxSecRcRYCNox0GD5UYL4PLKcH0FyfQrV+HVBK+GI8L3
FDzUcyJkR12Lcj1qf++7fsbzfOshL0AJPmidQCoc6wkLJpUEr/nYUqlI1Kx3YNuQ
LKmxFHS4l4/O/px3GKNDrLWDbrVlwciGIa3GZLS52PZdW3mAqT+cqcPcYK6SW71P
m1vE80VbNELX5q3YSRoOXtedoZ3Pk97LEmz/xQAsJ/jri0Z5Syk0Ok0m/Q==
=AMXp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=EGXd
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.5' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.5:
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZJWrhwAKCRCivnWIJHzd
Fs07AP9xliv5yIoQtRgPZXc0QDPyUm7zg8f5KDgqCVJtyHXcvAEAmmerBr39nbPc
XoMXALKx6NGt836P0C+bhvRcHdFPGwE=
=c/Xh
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.5
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.
The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().
CPU-A CPU-B
----- -----
ioctl(kvm_fd, KVM_SET_USER_MEMORY_REGION)
kvm_vm_ioctl_set_memory_region
kvm_set_memory_region
__kvm_set_memory_region
kvm_set_memslot(kvm, old, NULL, KVM_MR_DELETE)
kvm_invalidate_memslot
kvm_copy_memslot
kvm_replace_memslot
kvm_swap_active_memslots (A)
kvm_arch_flush_shadow_memslot (B)
same page sharing by KSM
kvm_mmu_notifier_invalidate_range_start
:
kvm_mmu_notifier_change_pte
kvm_handle_hva_range
__kvm_handle_hva_range
kvm_set_spte_gfn (C)
:
kvm_mmu_notifier_invalidate_range_end
Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.
We tried a git-bisect and the first problematic commit is cd4c718352 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit d5d8184d35
("KVM: ARM: Memory virtualization setup").
Cc: stable@vger.kernel.org # v3.9+
Fixes: d5d8184d35 ("KVM: ARM: Memory virtualization setup")
Reported-by: Shuai Hu <hshuai@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <20230615054259.14911-1-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* kvm-arm64/eager-page-splitting:
: Eager Page Splitting, courtesy of Ricardo Koller.
:
: Dirty logging performance is dominated by the cost of splitting
: hugepages to PTE granularity. On systems that mere mortals can get their
: hands on, each fault incurs the cost of a full break-before-make
: pattern, wherein the broadcast invalidation and ensuing serialization
: significantly increases fault latency.
:
: The goal of eager page splitting is to move the cost of hugepage
: splitting out of the stage-2 fault path and instead into the ioctls
: responsible for managing the dirty log:
:
: - If manual protection is enabled for the VM, hugepage splitting
: happens in the KVM_CLEAR_DIRTY_LOG ioctl. This is desirable as it
: provides userspace granular control over hugepage splitting.
:
: - Otherwise, if userspace relies on the legacy dirty log behavior
: (clear on collection), hugepage splitting is done at the moment dirty
: logging is enabled for a particular memslot.
:
: Support for eager page splitting requires explicit opt-in from
: userspace, which is realized through the
: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE capability.
arm64: kvm: avoid overflow in integer division
KVM: arm64: Use local TLBI on permission relaxation
KVM: arm64: Split huge pages during KVM_CLEAR_DIRTY_LOG
KVM: arm64: Open-code kvm_mmu_write_protect_pt_masked()
KVM: arm64: Split huge pages when dirty logging is enabled
KVM: arm64: Add kvm_uninit_stage2_mmu()
KVM: arm64: Refactor kvm_arch_commit_memory_region()
KVM: arm64: Add kvm_pgtable_stage2_split()
KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
KVM: arm64: Export kvm_are_all_memslots_empty()
KVM: arm64: Add helper for creating unlinked stage2 subtrees
KVM: arm64: Add KVM_PGTABLE_WALK flags for skipping CMOs and BBM TLBIs
KVM: arm64: Rename free_removed to free_unlinked
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Simpify kvm_deassign_ioeventfd_idx to use list_for_each_entry as the
loop just ends at the entry that's found and deleted.
Note, coalesced_mmio_ops and ioeventfd_ops are the only instances of
kvm_io_device_ops that implement a destructor, all other callers of
kvm_io_bus_unregister_dev() are unaffected by this change.
Suggested-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230207123713.3905-3-wei.w.wang@intel.com
[sean: call out that only select users implement a destructor]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Current usage of kvm_io_device requires users to destruct it with an extra
call of kvm_iodevice_destructor after the device gets unregistered from
kvm_io_bus. This is not necessary and can cause errors if a user forgot
to make the extra call.
Simplify the usage by combining kvm_iodevice_destructor into
kvm_io_bus_unregister_dev. This reduces LOCs a bit for users and can
avoid the leakage of destructing the device explicitly.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230207123713.3905-2-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The only instances of get_user_pages_remote() invocations which used the
vmas parameter were for a single page which can instead simply look up the
VMA directly. In particular:-
- __update_ref_ctr() looked up the VMA but did nothing with it so we simply
remove it.
- __access_remote_vm() was already using vma_lookup() when the original
lookup failed so by doing the lookup directly this also de-duplicates the
code.
We are able to perform these VMA operations as we already hold the
mmap_lock in order to be able to call get_user_pages_remote().
As part of this work we add get_user_page_vma_remote() which abstracts the
VMA lookup, error handling and decrementing the page reference count should
the VMA lookup fail.
This forms part of a broader set of patches intended to eliminate the vmas
parameter altogether.
[akpm@linux-foundation.org: avoid passing NULL to PTR_ERR]
Link: https://lkml.kernel.org/r/d20128c849ecdbf4dd01cc828fcec32127ed939a.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> (for arm64)
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com> (for s390)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "remove the vmas parameter from GUP APIs", v6.
(pin_/get)_user_pages[_remote]() each provide an optional output parameter
for an array of VMA objects associated with each page in the input range.
These provide the means for VMAs to be returned, as long as mm->mmap_lock
is never released during the GUP operation (i.e. the internal flag
FOLL_UNLOCKABLE is not specified).
In addition, these VMAs can only be accessed with the mmap_lock held and
become invalidated the moment it is released.
The vast majority of invocations do not use this functionality and of
those that do, all but one case retrieve a single VMA to perform checks
upon.
It is not egregious in the single VMA cases to simply replace the
operation with a vma_lookup(). In these cases we duplicate the (fast)
lookup on a slow path already under the mmap_lock, abstracted to a new
get_user_page_vma_remote() inline helper function which also performs
error checking and reference count maintenance.
The special case is io_uring, where io_pin_pages() specifically needs to
assert that the VMAs underlying the range do not result in broken
long-term GUP file-backed mappings.
As GUP now internally asserts that FOLL_LONGTERM mappings are not
file-backed in a broken fashion (i.e. requiring dirty tracking) - as
implemented in "mm/gup: disallow FOLL_LONGTERM GUP-nonfast writing to
file-backed mappings" - this logic is no longer required and so we can
simply remove it altogether from io_uring.
Eliminating the vmas parameter eliminates an entire class of danging
pointer errors that might have occured should the lock have been
incorrectly released.
In addition, the API is simplified and now clearly expresses what it is
intended for - applying the specified GUP flags and (if pinning) returning
pinned pages.
This change additionally opens the door to further potential improvements
in GUP and the possible marrying of disparate code paths.
I have run this series against gup_test with no issues.
Thanks to Matthew Wilcox for suggesting this refactoring!
This patch (of 6):
No invocation of get_user_pages() use the vmas parameter, so remove it.
The GUP API is confusing and caveated. Recent changes have done much to
improve that, however there is more we can do. Exporting vmas is a prime
target as the caller has to be extremely careful to preclude their use
after the mmap_lock has expired or otherwise be left with dangling
pointers.
Removing the vmas parameter focuses the GUP functions upon their primary
purpose - pinning (and outputting) pages as well as performing the actions
implied by the input flags.
This is part of a patch series aiming to remove the vmas parameter
altogether.
Link: https://lkml.kernel.org/r/cover.1684350871.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/589e0c64794668ffc799651e8d85e703262b1e9d.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com> (for radeon parts)
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sean Christopherson <seanjc@google.com> (KVM)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since c9d6015486 ("KVM: allow KVM_BUG/KVM_BUG_ON to handle 64-bit cond")
'cond' is internally converted to boolean, so caller's explicit conversion
from void* is unnecessary.
Remove the double bang.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
base-commit: 76a17bf03a268bc342e08c05d8ddbe607d294eb4
Link: https://lore.kernel.org/r/20230605114852.288964-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM honors past and in-progress mmu_notifier invalidations when
reloading the APIC-access page, use KVM's "standard" invalidation hooks
to trigger a reload and delete the one-off usage of invalidate_range().
Aside from eliminating one-off code in KVM, dropping KVM's use of
invalidate_range() will allow common mmu_notifier to redefine the API to
be more strictly focused on invalidating secondary TLBs that share the
primary MMU's page tables.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20230602011518.787006-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
On kzalloc() failure, taking the `goto fail` path leads to kfree(NULL).
Such no-op has no use. Move it out.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230327175457.735903-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Wrap the vcpu->pid dereference in the debugfs hook vcpu_get_pid() with
proper RCU read (un)lock. Unlike the code in kvm_vcpu_ioctl(),
vcpu_get_pid() is not a simple access; the pid pointer is passed to
pid_nr() and fully dereferenced if the pointer is non-NULL.
Failure to acquire RCU could result in use-after-free of the old pid if
a different task invokes KVM_RUN and puts the last reference to the old
vcpu->pid between vcpu_get_pid() reading the pointer and dereferencing it
in pid_nr().
Fixes: e36de87d34 ("KVM: debugfs: expose pid of vcpu threads")
Link: https://lore.kernel.org/r/20230211010719.982919-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.
When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):
int num_vcpus = atomic_read(&kvm->online_vcpus);
i = array_index_nospec(i, num_vcpus);
return xa_load(&kvm->vcpu_array, i);
Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:
xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \
(atomic_read(&kvm->online_vcpus) - 1))
In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().
However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.
This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:
vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
if (r < 0) {
xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
kvm_put_kvm_no_destroy(kvm);
goto unlock_vcpu_destroy;
}
atomic_inc(&kvm->online_vcpus);
This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co>
Cc: stable@vger.kernel.org
Fixes: c5b0775491 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject hardware enabling, i.e. VM creation, if a restart/shutdown has
been initiated to avoid re-enabling hardware between kvm_reboot() and
machine_{halt,power_off,restart}(). The restart case is especially
problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on
SVM) blocks INIT, which results in the restart/reboot hanging as BIOS
is unable to wake and rendezvous with APs.
Note, this bug, and the original issue that motivated the addition of
kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`.
In a "normal" reboot, userspace will gracefully teardown userspace before
triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process
that might do ioctl(KVM_CREATE_VM) is long gone.
Fixes: 8e1c18157d ("KVM: VMX: Disable VMX when system shutdown")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use syscore_ops.shutdown to disable hardware virtualization during a
reboot instead of using the dedicated reboot_notifier so that KVM disables
virtualization _after_ system_state has been updated. This will allow
fixing a race in KVM's handling of a forced reboot where KVM can end up
enabling hardware virtualization between kernel_restart_prepare() and
machine_restart().
Rename KVM's hook to match the syscore op to avoid any possible confusion
from wiring up a "reboot" helper to a "shutdown" hook (neither "shutdown
nor "reboot" is completely accurate as the hook handles both).
Opportunistically rewrite kvm_shutdown()'s comment to make it less VMX
specific, and to explain why kvm_rebooting exists.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: kvmarm@lists.linux.dev
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: kvm-riscv@lists.infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Export kvm_are_all_memslots_empty(). This will be used by a future
commit when checking before setting a capability.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230426172330.1439644-5-ricarkol@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some
major architectures it's not even consistently available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wp7f
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
When introduced, IRQFD resampling worked on POWER8 with XICS. However
KVM on POWER9 has never implemented it - the compatibility mode code
("XICS-on-XIVE") misses the kvm_notify_acked_irq() call and the native
XIVE mode does not handle INTx in KVM at all.
This moved the capability support advertising to platforms and stops
advertising it on XIVE, i.e. POWER9 and later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220504074807.3616813-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM irqfd based emulation of level-triggered interrupts doesn't work
quite correctly in some cases, particularly in the case of interrupts
that are handled in a Linux guest as oneshot interrupts (IRQF_ONESHOT).
Such an interrupt is acked to the device in its threaded irq handler,
i.e. later than it is acked to the interrupt controller (EOI at the end
of hardirq), not earlier.
Linux keeps such interrupt masked until its threaded handler finishes,
to prevent the EOI from re-asserting an unacknowledged interrupt.
However, with KVM + vfio (or whatever is listening on the resamplefd)
we always notify resamplefd at the EOI, so vfio prematurely unmasks the
host physical IRQ, thus a new physical interrupt is fired in the host.
This extra interrupt in the host is not a problem per se. The problem is
that it is unconditionally queued for injection into the guest, so the
guest sees an extra bogus interrupt. [*]
There are observed at least 2 user-visible issues caused by those
extra erroneous interrupts for a oneshot irq in the guest:
1. System suspend aborted due to a pending wakeup interrupt from
ChromeOS EC (drivers/platform/chrome/cros_ec.c).
2. Annoying "invalid report id data" errors from ELAN0000 touchpad
(drivers/input/mouse/elan_i2c_core.c), flooding the guest dmesg
every time the touchpad is touched.
The core issue here is that by the time when the guest unmasks the IRQ,
the physical IRQ line is no longer asserted (since the guest has
acked the interrupt to the device in the meantime), yet we
unconditionally inject the interrupt queued into the guest by the
previous resampling. So to fix the issue, we need a way to detect that
the IRQ is no longer pending, and cancel the queued interrupt in this
case.
With IOAPIC we are not able to probe the physical IRQ line state
directly (at least not if the underlying physical interrupt controller
is an IOAPIC too), so in this patch we use irqfd resampler for that.
Namely, instead of injecting the queued interrupt, we just notify the
resampler that this interrupt is done. If the IRQ line is actually
already deasserted, we are done. If it is still asserted, a new
interrupt will be shortly triggered through irqfd and injected into the
guest.
In the case if there is no irqfd resampler registered for this IRQ, we
cannot fix the issue, so we keep the existing behavior: immediately
unconditionally inject the queued interrupt.
This patch fixes the issue for x86 IOAPIC only. In the long run, we can
fix it for other irqchips and other architectures too, possibly taking
advantage of reading the physical state of the IRQ line, which is
possible with some other irqchips (e.g. with arm64 GIC, maybe even with
the legacy x86 PIC).
[*] In this description we assume that the interrupt is a physical host
interrupt forwarded to the guest e.g. by vfio. Potentially the same
issue may occur also with a purely virtual interrupt from an
emulated device, e.g. if the guest handles this interrupt, again, as
a oneshot interrupt.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/kvm/31420943-8c5f-125c-a5ee-d2fde2700083@semihalf.com/
Link: https://lore.kernel.org/lkml/87o7wrug0w.wl-maz@kernel.org/
Message-Id: <20230322204344.50138-3-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is useful to be able to do read-only traversal of the list of all the
registered irqfd resamplers without locking the resampler_lock mutex.
In particular, we are going to traverse it to search for a resampler
registered for the given irq of an irqchip, and that will be done with
an irqchip spinlock (ioapic->lock) held, so it is undesirable to lock a
mutex in this context. So turn this list into an RCU list.
For protecting the read side, reuse kvm->irq_srcu which is already used
for protecting a number of irq related things (kvm->irq_routing,
irqfd->resampler->list, kvm->irq_ack_notifier_list,
kvm->arch.mask_notifier_list).
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Message-Id: <20230322204344.50138-2-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix stale comments that were left behind when install_new_memslots() was
replaced by kvm_swap_active_memslots() as part of the scalable memslots
rework.
Fixes: a54d806688 ("KVM: Keep memslots in tree-based structures instead of array-based ones")
Signed-off-by: Jun Miao <jun.miao@intel.com>
Link: https://lore.kernel.org/r/20230223052851.1054799-1-jun.miao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
KVM functions use "long" return values for functions that are wired up
to "struct file_operations", but otherwise use "int" return values for
functions that can return 0/-errno in order to avoid unintentional
divergences between 32-bit and 64-bit kernels.
Some code still uses "long" in unnecessary spots, though, which can
cause a little bit of confusion and unnecessary size casts. Let's
change these spots to use "int" types, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208140105.655814-6-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
- Honor reserved regions when testing for IOMMU find grained super
page support, avoiding a regression on s390 for a firmware device
where the existence of the mapping, even if unused can trigger
an error state. (Niklas Schnelle)
- Fix a deadlock in releasing KVM references by using the alternate
.release() rather than .destroy() callback for the kvm-vfio device.
(Yi Liu)
-----BEGIN PGP SIGNATURE-----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=tdng
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Honor reserved regions when testing for IOMMU find grained super page
support, avoiding a regression on s390 for a firmware device where
the existence of the mapping, even if unused can trigger an error
state. (Niklas Schnelle)
- Fix a deadlock in releasing KVM references by using the alternate
.release() rather than .destroy() callback for the kvm-vfio device.
(Yi Liu)
* tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio:
kvm/vfio: Fix potential deadlock on vfio group_lock
vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp()
Currently it is possible that the final put of a KVM reference comes from
vfio during its device close operation. This occurs while the vfio group
lock is held; however, if the vfio device is still in the kvm device list,
then the following call chain could result in a deadlock:
VFIO holds group->group_lock/group_rwsem
-> kvm_put_kvm
-> kvm_destroy_vm
-> kvm_destroy_devices
-> kvm_vfio_destroy
-> kvm_vfio_file_set_kvm
-> vfio_file_set_kvm
-> try to hold group->group_lock/group_rwsem
The key function is the kvm_destroy_devices() which triggers destroy cb
of kvm_device_ops. It calls back to vfio and try to hold group_lock. So
if this path doesn't call back to vfio, this dead lock would be fixed.
Actually, there is a way for it. KVM provides another point to free the
kvm-vfio device which is the point when the device file descriptor is
closed. This can be achieved by providing the release cb instead of the
destroy cb. Also rename kvm_vfio_destroy() to be kvm_vfio_release().
/*
* Destroy is responsible for freeing dev.
*
* Destroy may be called before or after destructors are called
* on emulated I/O regions, depending on whether a reference is
* held by a vcpu or other kvm component that gets destroyed
* after the emulated I/O.
*/
void (*destroy)(struct kvm_device *dev);
/*
* Release is an alternative method to free the device. It is
* called when the device file descriptor is closed. Once
* release is called, the destroy method will not be called
* anymore as the device is removed from the device list of
* the VM. kvm->lock is held.
*/
void (*release)(struct kvm_device *dev);
Fixes: 421cfe6596 ("vfio: remove VFIO_GROUP_NOTIFY_SET_KVM")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230114000351.115444-1-mjrosato@linux.ibm.com
Link: https://lore.kernel.org/r/20230120150528.471752-1-yi.l.liu@intel.com
[aw: update comment as well, s/destroy/release/]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Documentation/virt/kvm/locking.rst tells us that kvm->lock is taken outside
vcpu->mutex. But that doesn't actually happen very often; it's only in
some esoteric cases like migration with AMD SEV. This means that lockdep
usually doesn't notice, and doesn't do its job of keeping us honest.
Ensure that lockdep *always* knows about the ordering of these two locks,
by briefly taking vcpu->mutex in kvm_vm_ioctl_create_vcpu() while kvm->lock
is held.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20230111180651.14394-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the last two "out" lables to "err" labels now that the dust has
settled, i.e. now that there are no more planned changes to the order
of things in kvm_init().
Use "err" instead of "out" as it's easier to describe what failed than it
is to describe what needs to be unwound, e.g. if allocating a per-CPU kick
mask fails, KVM needs to free any masks that were allocated, and of course
needs to unwind previous operations.
Reported-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-51-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow architectures to opt out of the generic hardware enabling logic,
and opt out on both s390 and PPC, which don't need to manually enable
virtualization as it's always on (when available).
In addition to letting s390 and PPC drop a bit of dead code, this will
hopefully also allow ARM to clean up its related code, e.g. ARM has its
own per-CPU flag to track which CPUs have enable hardware due to the
need to keep hardware enabled indefinitely when pKVM is enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-50-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register the suspend/resume notifier hooks at the same time KVM registers
its reboot notifier so that all the code in kvm_init() that deals with
enabling/disabling hardware is bundled together. Opportunstically move
KVM's implementations to reside near the reboot notifier code for the
same reason.
Bunching the code together will allow architectures to opt out of KVM's
generic hardware enable/disable logic with minimal #ifdeffery.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-49-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework detecting hardware enabling errors to use a local variable in the
"enable all" path to track whether or not enabling was successful across
all CPUs. Using a global variable complicates paths that enable hardware
only on the current CPU, e.g. kvm_resume() and kvm_online_cpu().
Opportunistically add a WARN if hardware enabling fails during
kvm_resume(), KVM is all kinds of hosed if CPU0 fails to enable hardware.
The WARN is largely futile in the current code, as KVM BUG()s on spurious
faults on VMX instructions, e.g. attempting to run a vCPU on CPU if
hardware enabling fails will explode.
------------[ cut here ]------------
kernel BUG at arch/x86/kvm/x86.c:508!
invalid opcode: 0000 [#1] SMP
CPU: 3 PID: 1009 Comm: CPU 4/KVM Not tainted 6.1.0-rc1+ #11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_spurious_fault+0xa/0x10
Call Trace:
vmx_vcpu_load_vmcs+0x192/0x230 [kvm_intel]
vmx_vcpu_load+0x16/0x60 [kvm_intel]
kvm_arch_vcpu_load+0x32/0x1f0
vcpu_load+0x2f/0x40
kvm_arch_vcpu_ioctl_run+0x19/0x9d0
kvm_vcpu_ioctl+0x271/0x660
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
But, the WARN may provide a breadcrumb to understand what went awry, and
someday KVM may fix one or both of those bugs, e.g. by finding a way to
eat spurious faults no matter the context (easier said than done due to
side effects of certain operations, e.g. Intel's VMCLEAR).
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[sean: rebase, WARN on failure in kvm_resume()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-48-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a per-CPU variable instead of a shared bitmap to track which CPUs
have successfully enabled virtualization hardware. Using a per-CPU bool
avoids the need for an additional allocation, and arguably yields easier
to read code. Using a bitmap would be advantageous if KVM used it to
avoid generating IPIs to CPUs that failed to enable hardware, but that's
an extreme edge case and not worth optimizing, and the low level helpers
would still want to keep their individual checks as attempting to enable
virtualization hardware when it's already enabled can be problematic,
e.g. Intel's VMXON will fault.
Opportunistically change the order in hardware_enable_nolock() to set
the flag if and only if hardware enabling is successful, instead of
speculatively setting the flag and then clearing it on failure.
Add a comment explaining that the check in hardware_disable_nolock()
isn't simply paranoia. Waaay back when, commit 1b6c016818 ("KVM: Keep
track of which cpus have virtualization enabled"), added the logic as a
guards against CPU hotplug racing with hardware enable/disable. Now that
KVM has eliminated the race by taking cpu_hotplug_lock for read (via
cpus_read_lock()) when enabling or disabling hardware, at first glance it
appears that the check is now superfluous, i.e. it's tempting to remove
the per-CPU flag entirely...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-47-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the superfluous invocation of hardware_disable_nolock() during
kvm_exit(), as it's nothing more than a glorified nop.
KVM automatically disables hardware on all CPUs when the last VM is
destroyed, and kvm_exit() cannot be called until the last VM goes
away as the calling module is pinned by an elevated refcount of the fops
associated with /dev/kvm. This holds true even on x86, where the caller
of kvm_exit() is not kvm.ko, but is instead a dependent module, kvm_amd.ko
or kvm_intel.ko, as kvm_chardev_ops.owner is set to the module that calls
kvm_init(), not hardcoded to the base kvm.ko module.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[sean: rework changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-46-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock now
that KVM hooks CPU hotplug during the ONLINE phase, which can sleep.
Previously, KVM hooked the STARTING phase, which is not allowed to sleep
and thus could not take kvm_lock (a mutex). This effectively allows the
task that's initiating hardware enabling/disabling to preempted and/or
migrated.
Note, the Documentation/virt/kvm/locking.rst statement that kvm_count_lock
is "raw" because hardware enabling/disabling needs to be atomic with
respect to migration is wrong on multiple fronts. First, while regular
spinlocks can be preempted, the task holding the lock cannot be migrated.
Second, preventing migration is not required. on_each_cpu() disables
preemption, which ensures that cpus_hardware_enabled correctly reflects
hardware state. The task may be preempted/migrated between bumping
kvm_usage_count and invoking on_each_cpu(), but that's perfectly ok as
kvm_usage_count is still protected, e.g. other tasks that call
hardware_enable_all() will be blocked until the preempted/migrated owner
exits its critical section.
KVM does have lockless accesses to kvm_usage_count in the suspend/resume
flows, but those are safe because all tasks must be frozen prior to
suspending CPUs, and a task cannot be frozen while it holds one or more
locks (userspace tasks are frozen via a fake signal).
Preemption doesn't need to be explicitly disabled in the hotplug path.
The hotplug thread is pinned to the CPU that's being hotplugged, and KVM
only cares about having a stable CPU, i.e. to ensure hardware is enabled
on the correct CPU. Lockep, i.e. check_preemption_disabled(), plays nice
with this state too, as is_percpu_thread() is true for the hotplug thread.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-45-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the non-raw smp_processor_id() in the low hardware enable/disable
helpers as KVM absolutely relies on the CPU being stable, e.g. KVM would
end up with incorrect state if the task were migrated between accessing
cpus_hardware_enabled and actually enabling/disabling hardware.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-44-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable CPU hotplug when enabling/disabling hardware to prevent the
corner case where if the following sequence occurs:
1. A hotplugged CPU marks itself online in cpu_online_mask
2. The hotplugged CPU enables interrupt before invoking KVM's ONLINE
callback
3 hardware_{en,dis}able_all() is invoked on another CPU
the hotplugged CPU will be included in on_each_cpu() and thus get sent
through hardware_{en,dis}able_nolock() before kvm_online_cpu() is called.
start_secondary { ...
set_cpu_online(smp_processor_id(), true); <- 1
...
local_irq_enable(); <- 2
...
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); <- 3
}
KVM currently fudges around this race by keeping track of which CPUs have
done hardware enabling (see commit 1b6c016818 "KVM: Keep track of which
cpus have virtualization enabled"), but that's an inefficient, convoluted,
and hacky solution.
Signed-off-by: Chao Gao <chao.gao@intel.com>
[sean: split to separate patch, write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-43-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPU STARTING section doesn't allow callbacks to fail. Move KVM's
hotplug callback to ONLINE section so that it can abort onlining a CPU in
certain cases to avoid potentially breaking VMs running on existing CPUs.
For example, when KVM fails to enable hardware virtualization on the
hotplugged CPU.
Place KVM's hotplug state before CPUHP_AP_SCHED_WAIT_EMPTY as it ensures
when offlining a CPU, all user tasks and non-pinned kernel tasks have left
the CPU, i.e. there cannot be a vCPU task around. So, it is safe for KVM's
CPU offline callback to disable hardware virtualization at that point.
Likewise, KVM's online callback can enable hardware virtualization before
any vCPU task gets a chance to run on hotplugged CPUs.
Drop kvm_x86_check_processor_compatibility()'s WARN that IRQs are
disabled, as the ONLINE section runs with IRQs disabled. The WARN wasn't
intended to be a requirement, e.g. disabling preemption is sufficient,
the IRQ thing was purely an aggressive sanity check since the helper was
only ever invoked via SMP function call.
Rename KVM's CPU hotplug callbacks accordingly.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
[sean: drop WARN that IRQs are disabled]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-42-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_check_processor_compat() and its support code now that all
architecture implementations are nops.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-33-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_init() and kvm_arch_exit() now that all implementations
are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that
all implementations are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to kvm_vfio_ops_exit() further up kvm_exit() to try and
bring some amount of symmetry to the setup order in kvm_init(), and more
importantly so that the arch hooks are invoked dead last by kvm_exit().
This will allow arch code to move away from the arch hooks without any
change in ordering between arch code and common code in kvm_exit().
That kvm_vfio_ops_exit() is called last appears to be 100% arbitrary. It
was bolted on after the fact by commit 571ee1b685 ("kvm: vfio: fix
unregister kvm_device_ops of vfio"). The nullified kvm_device_ops_table
is also local to kvm_main.c and is used only when there are active VMs,
so unless arch code is doing something truly bizarre, nullifying the
table earlier in kvm_exit() is little more than a nop.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20221130230934.1014142-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate cpus_hardware_enabled after arch hardware setup so that arch
"init" and "hardware setup" are called back-to-back and thus can be
combined in a future patch. cpus_hardware_enabled is never used before
kvm_create_vm(), i.e. doesn't have a dependency with hardware setup and
only needs to be allocated before /dev/kvm is exposed to userspace.
Free the object before the arch hooks are invoked to maintain symmetry,
and so that arch code can move away from the hooks without having to
worry about ordering changes.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <20221130230934.1014142-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move initialization of KVM's IRQ FD workqueue below arch hardware setup
as a step towards consolidating arch "init" and "hardware setup", and
eventually towards dropping the hooks entirely. There is no dependency
on the workqueue being created before hardware setup, the workqueue is
used only when destroying VMs, i.e. only needs to be created before
/dev/kvm is exposed to userspace.
Move the destruction of the workqueue before the arch hooks to maintain
symmetry, and so that arch code can move away from the hooks without
having to worry about ordering changes.
Reword the comment about kvm_irqfd_init() needing to come after
kvm_arch_init() to call out that kvm_arch_init() must come before common
KVM does _anything_, as x86 very subtly relies on that behavior to deal
with multiple calls to kvm_init(), e.g. if userspace attempts to load
kvm_amd.ko and kvm_intel.ko. Tag the code with a FIXME, as x86's subtle
requirement is gross, and invoking an arch callback as the very first
action in a helper that is called only from arch code is silly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register /dev/kvm, i.e. expose KVM to userspace, only after all other
setup has completed. Once /dev/kvm is exposed, userspace can start
invoking KVM ioctls, creating VMs, etc... If userspace creates a VM
before KVM is done with its configuration, bad things may happen, e.g.
KVM will fail to properly migrate vCPU state if a VM is created before
KVM has registered preemption notifiers.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86:
* Change tdp_mmu to a read-only parameter
* Separate TDP and shadow MMU page fault paths
* Enable Hyper-V invariant TSC control
selftests:
* Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
No code is using KVM_MMU_READ_LOCK() or KVM_MMU_READ_UNLOCK(). They
used to be in virt/kvm/pfncache.c:
KVM_MMU_READ_LOCK(kvm);
retry = mmu_notifier_retry_hva(kvm, mmu_seq, uhva);
KVM_MMU_READ_UNLOCK(kvm);
However, since 58cd407ca4 ("KVM: Fix multiple races in gfn=>pfn cache
refresh", 2022-05-25) the code is only relying on the MMU notifier's
invalidation count and sequence number.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20221207120617.9409-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
