I am retiring from the project, so removing myself from MAINTAINERS as I won't
have time to dedicate to it.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Link: https://lore.kernel.org/r/20240828211117.9422-2-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
On X1E80100, GPIO interrupts for wakeup-capable pins have been broken since
the introduction of the pinctrl driver. This prevents keyboard and touchpad
from working on most of the X1E laptops. So far we have worked around this
by manually building a kernel with the "wakeup-parent" removed from the
pinctrl node in the device tree, but we cannot expect all users to do that.
Implement a similar workaround in the driver by clearing the wakeirq_map
for X1E80100. This avoids using the PDC wakeup parent for all GPIOs
and handles the interrupts directly in the pinctrl driver instead.
The PDC driver needs additional changes to support X1E80100 properly.
Adding a workaround separately first allows to land the necessary PDC
changes through the normal release cycle, while still solving the more
critical problem with keyboard and touchpad on the current stable kernel
versions. Bypassing the PDC is enough for now, because we have not yet
enabled the deep idle states where using the PDC becomes necessary.
Cc: stable@vger.kernel.org
Fixes: 05e4941d97 ("pinctrl: qcom: Add X1E80100 pinctrl driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/20240830-x1e80100-bypass-pdc-v1-1-d4c00be0c3e3@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The value written into the TPM CnV can only be updated into the hardware
when the counter increases. Additional writes to the CnV write buffer are
ignored until the register has been updated. Therefore, we need to check
if the CnV has been updated before continuing. This may require waiting for
1 counter cycle in the worst case.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In tpm_set_next_event(delta), return -ETIME by wrong cast to int when delta
is larger than INT_MAX.
For example:
tpm_set_next_event(delta = 0xffff_fffe)
{
...
next = tpm_read_counter(); // assume next is 0x10
next += delta; // next will 0xffff_fffe + 0x10 = 0x1_0000_000e
now = tpm_read_counter(); // now is 0x10
...
return (int)(next - now) <= 0 ? -ETIME : 0;
^^^^^^^^^^
0x1_0000_000e - 0x10 = 0xffff_fffe, which is -2 when
cast to int. So return -ETIME.
}
To fix this, introduce a 'prev' variable and check if 'now - prev' is
larger than delta.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-1-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
GCC's named address space checks errors out with:
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’:
drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of
‘free_percpu_irq’ from pointer to non-enclosed address space
29 | free_percpu_irq(of_irq->irq, clkevt);
| ^~~~~~
In file included from drivers/clocksource/timer-of.c:8:
./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
201 | extern void free_percpu_irq(unsigned int, void __percpu *);
| ^~~~~~~~~~~~~~~
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’:
drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of
‘request_percpu_irq’ from pointer to non-enclosed address space
74 | np->full_name, clkevt) :
| ^~~~~~
./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
190 | const char *devname, void __percpu *percpu_dev_id)
Sparse warns about:
timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces)
timer-of.c:29:46: expected void [noderef] __percpu *
timer-of.c:29:46: got struct clock_event_device *clkevt
timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces)
timer-of.c:74:51: expected void [noderef] __percpu *percpu_dev_id
timer-of.c:74:51: got struct clock_event_device *clkevt
It appears the code is incorrect as reported by Uros Bizjak:
"The referred code is questionable as it tries to reuse
the clkevent pointer once as percpu pointer and once as generic
pointer, which should be avoided."
This change removes the percpu related code as no drivers is using it.
[Daniel: Fixed the description]
Fixes: dc11bae785 ("clocksource/drivers: Add timer-of common init routine")
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Currently while defining `THIS_MODULE` symbol in `module!()`, the
pointer used to construct `ThisModule` is derived from an immutable
reference of `__this_module`, which means the pointer doesn't have
the provenance for writing, and that means any write to that pointer
is UB regardless of data races or not. However, the usage of
`THIS_MODULE` includes passing this pointer to functions that may write
to it (probably in unsafe code), and this will create soundness issues.
One way to fix this is using `addr_of_mut!()` but that requires the
unstable feature "const_mut_refs". So instead of `addr_of_mut()!`,
an extern static `Opaque` is used here: since `Opaque<T>` is transparent
to `T`, an extern static `Opaque` will just wrap the C symbol (defined
in a C compile unit) in an `Opaque`, which provides a pointer with
writable provenance via `Opaque::get()`. This fix the potential UBs
because of pointer provenance unmatched.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/465412664
Fixes: 1fbde52bde ("rust: add `macros` crate")
Cc: stable@vger.kernel.org # 6.6.x: be2ca1e039: ("rust: types: Make Opaque::get const")
Link: https://lore.kernel.org/r/20240828180129.4046355-1-boqun.feng@gmail.com
[ Fixed two typos, reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Fix a potential memory leak in the ata host initialization code (from
Zheng).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZtTyywAKCRDdoc3SxdoY
dj21AQCwVP4FK9zy7KpA5LJqKGyVvWeAjS5zJ3e3B3172A+H9wEA/eZCjXDRjpHl
Qdx2FprMjbjeaBzb204P4YmGAdcitwY=
=TyPu
-----END PGP SIGNATURE-----
Merge tag 'ata-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix a potential memory leak in the ata host initialization code (from
Zheng)
* tag 'ata-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Fix memory leak for error path in ata_host_alloc()
codetag_module_init() is used to initialize sections containing allocation
tags. This function is used to initialize module sections as well as core
kernel sections, in which case the module parameter is set to NULL. This
function has to be called even when CONFIG_MODULES=n to initialize core
kernel allocation tag sections. When CONFIG_MODULES=n, this function is a
NOP, which is wrong. This leads to /proc/allocinfo reported as empty.
Fix this by making it independent of CONFIG_MODULES.
Link: https://lkml.kernel.org/r/20240828231536.1770519-1-surenb@google.com
Fixes: 916cc5167c ("lib: code tagging framework")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running the vmalloc stress on a 448-core system, observe the average
latency of purge_vmap_node() is about 2 seconds by using the eBPF/bcc
'funclatency.py' tool [1].
# /your-git-repo/bcc/tools/funclatency.py -u purge_vmap_node & pid1=$! && sleep 8 && modprobe test_vmalloc nr_threads=$(nproc) run_test_mask=0x7; kill -SIGINT $pid1
usecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 29 | |
4 -> 7 : 19 | |
8 -> 15 : 56 | |
16 -> 31 : 483 |**** |
32 -> 63 : 1548 |************ |
64 -> 127 : 2634 |********************* |
128 -> 255 : 2535 |********************* |
256 -> 511 : 1776 |************** |
512 -> 1023 : 1015 |******** |
1024 -> 2047 : 573 |**** |
2048 -> 4095 : 488 |**** |
4096 -> 8191 : 1091 |********* |
8192 -> 16383 : 3078 |************************* |
16384 -> 32767 : 4821 |****************************************|
32768 -> 65535 : 3318 |*************************** |
65536 -> 131071 : 1718 |************** |
131072 -> 262143 : 2220 |****************** |
262144 -> 524287 : 1147 |********* |
524288 -> 1048575 : 1179 |********* |
1048576 -> 2097151 : 822 |****** |
2097152 -> 4194303 : 906 |******* |
4194304 -> 8388607 : 2148 |***************** |
8388608 -> 16777215 : 4497 |************************************* |
16777216 -> 33554431 : 289 |** |
avg = 2041714 usecs, total: 78381401772 usecs, count: 38390
The worst case is over 16-33 seconds, so soft lockup is triggered [2].
[Root Cause]
1) Each purge_list has the long list. The following shows the number of
vmap_area is purged.
crash> p vmap_nodes
vmap_nodes = $27 = (struct vmap_node *) 0xff2de5a900100000
crash> vmap_node 0xff2de5a900100000 128 | grep nr_purged
nr_purged = 663070
...
nr_purged = 821670
nr_purged = 692214
nr_purged = 726808
...
2) atomic_long_sub() employs the 'lock' prefix to ensure the atomic
operation when purging each vmap_area. However, the iteration is over
600000 vmap_area (See 'nr_purged' above).
Here is objdump output:
$ objdump -D vmlinux
ffffffff813e8c80 <purge_vmap_node>:
...
ffffffff813e8d70: f0 48 29 2d 68 0c bb lock sub %rbp,0x2bb0c68(%rip)
...
Quote from "Instruction tables" pdf file [3]:
Instructions with a LOCK prefix have a long latency that depends on
cache organization and possibly RAM speed. If there are multiple
processors or cores or direct memory access (DMA) devices, then all
locked instructions will lock a cache line for exclusive access,
which may involve RAM access. A LOCK prefix typically costs more
than a hundred clock cycles, even on single-processor systems.
That's why the latency of purge_vmap_node() dramatically increases
on a many-core system: One core is busy on purging each vmap_area of
the *long* purge_list and executing atomic_long_sub() for each
vmap_area, while other cores free vmalloc allocations and execute
atomic_long_add_return() in free_vmap_area_noflush().
[Solution]
Employ a local variable to record the total purged pages, and execute
atomic_long_sub() after the traversal of the purge_list is done. The
experiment result shows the latency improvement is 99%.
[Experiment Result]
1) System Configuration: Three servers (with HT-enabled) are tested.
* 72-core server: 3rd Gen Intel Xeon Scalable Processor*1
* 192-core server: 5th Gen Intel Xeon Scalable Processor*2
* 448-core server: AMD Zen 4 Processor*2
2) Kernel Config
* CONFIG_KASAN is disabled
3) The data in column "w/o patch" and "w/ patch"
* Unit: micro seconds (us)
* Each data is the average of 3-time measurements
System w/o patch (us) w/ patch (us) Improvement (%)
--------------- -------------- ------------- -------------
72-core server 2194 14 99.36%
192-core server 143799 1139 99.21%
448-core server 1992122 6883 99.65%
[1] https://github.com/iovisor/bcc/blob/master/tools/funclatency.py
[2] https://gist.github.com/AdrianHuang/37c15f67b45407b83c2d32f918656c12
[3] https://www.agner.org/optimize/instruction_tables.pdf
Link: https://lkml.kernel.org/r/20240829130633.2184-1-ahuang12@lenovo.com
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Soon I won't be able to use my current email address.
Link: https://lkml.kernel.org/r/20240830095658.1203198-1-jankul@alatek.krakow.pl
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Cc: David S. Miller <davem@davemloft.net>
Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, the behavior of zswap.writeback wrt. the cgroup hierarchy
seems a bit odd. Unlike zswap.max, it doesn't honor the value from parent
cgroups. This surfaced when people tried to globally disable zswap
writeback, i.e. reserve physical swap space only for hibernation [1] -
disabling zswap.writeback only for the root cgroup results in subcgroups
with zswap.writeback=1 still performing writeback.
The inconsistency became more noticeable after I introduced the
MemoryZSwapWriteback= systemd unit setting [2] for controlling the knob.
The patch assumed that the kernel would enforce the value of parent
cgroups. It could probably be workarounded from systemd's side, by going
up the slice unit tree and inheriting the value. Yet I think it's more
sensible to make it behave consistently with zswap.max and friends.
[1] https://wiki.archlinux.org/title/Power_management/Suspend_and_hibernate#Disable_zswap_writeback_to_use_the_swap_space_only_for_hibernation
[2] https://github.com/systemd/systemd/pull/31734
Link: https://lkml.kernel.org/r/20240823162506.12117-1-me@yhndnzj.com
Fixes: 501a06fe8e ("zswap: memcontrol: implement zswap writeback disabling")
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Richard reports that since 772dd03427 ("mm: enumerate all gfp flags"),
gfp-translate is broken, as the bit numbers are implicit, leaving the
shell script unable to extract them. Even more, some bits are now at a
variable location, making it double extra hard to parse using a simple
shell script.
Use a brute-force approach to the problem by generating a small C stub
that will use the enum to dump the interesting bits.
As an added bonus, we are now able to identify invalid bits for a given
configuration. As an added drawback, we cannot parse include files that
predate this change anymore. Tough luck.
Link: https://lkml.kernel.org/r/20240823163850.3791201-1-maz@kernel.org
Fixes: 772dd03427 ("mm: enumerate all gfp flags")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reported-by: Richard Weinberger <richard@nod.at>
Cc: Petr Tesařík <petr@tesarici.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit 5da226dbfc ("mm: skip CMA pages when they are not
available") and b7108d6631 ("Multi-gen LRU: skip CMA pages when they are
not eligible").
lruvec->lru_lock is highly contended and is held when calling
isolate_lru_folios. If the lru has a large number of CMA folios
consecutively, while the allocation type requested is not MIGRATE_MOVABLE,
isolate_lru_folios can hold the lock for a very long time while it skips
those. For FIO workload, ~150million order=0 folios were skipped to
isolate a few ZONE_DMA folios [1]. This can cause lockups [1] and high
memory pressure for extended periods of time [2].
Remove skipping CMA for MGLRU as well, as it was introduced in sort_folio
for the same resaon as 5da226dbfc.
[1] https://lore.kernel.org/all/CAOUHufbkhMZYz20aM_3rHZ3OcK4m2puji2FGpUpn_-DevGk3Kg@mail.gmail.com/
[2] https://lore.kernel.org/all/ZrssOrcJIDy8hacI@gmail.com/
[usamaarif642@gmail.com: also revert b7108d6631, per Johannes]
Link: https://lkml.kernel.org/r/9060a32d-b2d7-48c0-8626-1db535653c54@gmail.com
Link: https://lkml.kernel.org/r/357ac325-4c61-497a-92a3-bdbd230d5ec9@gmail.com
Link: https://lkml.kernel.org/r/9060a32d-b2d7-48c0-8626-1db535653c54@gmail.com
Fixes: 5da226dbfc ("mm: skip CMA pages when they are not available")
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zhaoyang Huang <huangzhaoyang@gmail.com>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix the condition to exclude the elfcorehdr segment from the SHA digest
calculation.
The j iterator is an index into the output sha_regions[] array, not into
the input image->segment[] array. Once it reaches
image->elfcorehdr_index, all subsequent segments are excluded. Besides,
if the purgatory segment precedes the elfcorehdr segment, the elfcorehdr
may be wrongly included in the calculation.
Link: https://lkml.kernel.org/r/20240805150750.170739-1-petr.tesarik@suse.com
Fixes: f7cc804a9f ("kexec: exclude elfcorehdr from the segment digest")
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit a694291a62 ("nilfs2: separate wait function from
nilfs_segctor_write") was applied, the log writing function
nilfs_segctor_do_construct() was able to issue I/O requests continuously
even if user data blocks were split into multiple logs across segments,
but two potential flaws were introduced in its error handling.
First, if nilfs_segctor_begin_construction() fails while creating the
second or subsequent logs, the log writing function returns without
calling nilfs_segctor_abort_construction(), so the writeback flag set on
pages/folios will remain uncleared. This causes page cache operations to
hang waiting for the writeback flag. For example,
truncate_inode_pages_final(), which is called via nilfs_evict_inode() when
an inode is evicted from memory, will hang.
Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared.
As a result, if the next log write involves checkpoint creation, that's
fine, but if a partial log write is performed that does not, inodes with
NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files"
list, and their data and b-tree blocks may not be written to the device,
corrupting the block mapping.
Fix these issues by uniformly calling nilfs_segctor_abort_construction()
on failure of each step in the loop in nilfs_segctor_do_construct(),
having it clean up logs and segment usages according to progress, and
correcting the conditions for calling nilfs_redirty_inodes() to ensure
that the NILFS_I_COLLECTED flag is cleared.
Link: https://lkml.kernel.org/r/20240814101119.4070-1-konishi.ryusuke@gmail.com
Fixes: a694291a62 ("nilfs2: separate wait function from nilfs_segctor_write")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In an error injection test of a routine for mount-time recovery, KASAN
found a use-after-free bug.
It turned out that if data recovery was performed using partial logs
created by dsync writes, but an error occurred before starting the log
writer to create a recovered checkpoint, the inodes whose data had been
recovered were left in the ns_dirty_files list of the nilfs object and
were not freed.
Fix this issue by cleaning up inodes that have read the recovery data if
the recovery routine fails midway before the log writer starts.
Link: https://lkml.kernel.org/r/20240810065242.3701-1-konishi.ryusuke@gmail.com
Fixes: 0f3e1c7f23 ("nilfs2: recovery functions")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The superblock buffers of nilfs2 can not only be overwritten at runtime
for modifications/repairs, but they are also regularly swapped, replaced
during resizing, and even abandoned when degrading to one side due to
backing device issues. So, accessing them requires mutual exclusion using
the reader/writer semaphore "nilfs->ns_sem".
Some sysfs attribute show methods read this superblock buffer without the
necessary mutual exclusion, which can cause problems with pointer
dereferencing and memory access, so fix it.
Link: https://lkml.kernel.org/r/20240811100320.9913-1-konishi.ryusuke@gmail.com
Fixes: da7141fb78 ("nilfs2: add /sys/fs/nilfs2/<device> group")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since khugepaged was changed to allow retracting page tables in file
mappings without holding the mmap lock, these BUG_ON()s are wrong - get
rid of them.
We could also remove the preceding "if (unlikely(...))" block, but then we
could reach pte_offset_map_lock() with transhuge pages not just for file
mappings but also for anonymous mappings - which would probably be fine
but I think is not necessarily expected.
Link: https://lkml.kernel.org/r/20240813-uffd-thp-flip-fix-v2-2-5efa61078a41@google.com
Fixes: 1d65b771bc ("mm/khugepaged: retract_page_tables() without mmap or vma lock")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "userfaultfd: fix races around pmd_trans_huge() check", v2.
The pmd_trans_huge() code in mfill_atomic() is wrong in three different
ways depending on kernel version:
1. The pmd_trans_huge() check is racy and can lead to a BUG_ON() (if you hit
the right two race windows) - I've tested this in a kernel build with
some extra mdelay() calls. See the commit message for a description
of the race scenario.
On older kernels (before 6.5), I think the same bug can even
theoretically lead to accessing transhuge page contents as a page table
if you hit the right 5 narrow race windows (I haven't tested this case).
2. As pointed out by Qi Zheng, pmd_trans_huge() is not sufficient for
detecting PMDs that don't point to page tables.
On older kernels (before 6.5), you'd just have to win a single fairly
wide race to hit this.
I've tested this on 6.1 stable by racing migration (with a mdelay()
patched into try_to_migrate()) against UFFDIO_ZEROPAGE - on my x86
VM, that causes a kernel oops in ptlock_ptr().
3. On newer kernels (>=6.5), for shmem mappings, khugepaged is allowed
to yank page tables out from under us (though I haven't tested that),
so I think the BUG_ON() checks in mfill_atomic() are just wrong.
I decided to write two separate fixes for these (one fix for bugs 1+2, one
fix for bug 3), so that the first fix can be backported to kernels
affected by bugs 1+2.
This patch (of 2):
This fixes two issues.
I discovered that the following race can occur:
mfill_atomic other thread
============ ============
<zap PMD>
pmdp_get_lockless() [reads none pmd]
<bail if trans_huge>
<if none:>
<pagefault creates transhuge zeropage>
__pte_alloc [no-op]
<zap PMD>
<bail if pmd_trans_huge(*dst_pmd)>
BUG_ON(pmd_none(*dst_pmd))
I have experimentally verified this in a kernel with extra mdelay() calls;
the BUG_ON(pmd_none(*dst_pmd)) triggers.
On kernels newer than commit 0d940a9b27 ("mm/pgtable: allow
pte_offset_map[_lock]() to fail"), this can't lead to anything worse than
a BUG_ON(), since the page table access helpers are actually designed to
deal with page tables concurrently disappearing; but on older kernels
(<=6.4), I think we could probably theoretically race past the two
BUG_ON() checks and end up treating a hugepage as a page table.
The second issue is that, as Qi Zheng pointed out, there are other types
of huge PMDs that pmd_trans_huge() can't catch: devmap PMDs and swap PMDs
(in particular, migration PMDs).
On <=6.4, this is worse than the first issue: If mfill_atomic() runs on a
PMD that contains a migration entry (which just requires winning a single,
fairly wide race), it will pass the PMD to pte_offset_map_lock(), which
assumes that the PMD points to a page table.
Breakage follows: First, the kernel tries to take the PTE lock (which will
crash or maybe worse if there is no "struct page" for the address bits in
the migration entry PMD - I think at least on X86 there usually is no
corresponding "struct page" thanks to the PTE inversion mitigation, amd64
looks different).
If that didn't crash, the kernel would next try to write a PTE into what
it wrongly thinks is a page table.
As part of fixing these issues, get rid of the check for pmd_trans_huge()
before __pte_alloc() - that's redundant, we're going to have to check for
that after the __pte_alloc() anyway.
Backport note: pmdp_get_lockless() is pmd_read_atomic() in older kernels.
Link: https://lkml.kernel.org/r/20240813-uffd-thp-flip-fix-v2-0-5efa61078a41@google.com
Link: https://lkml.kernel.org/r/20240813-uffd-thp-flip-fix-v2-1-5efa61078a41@google.com
Fixes: c1a4de99fa ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 8c61291fd8 ("mm: fix incorrect vbq reference in
purge_fragmented_block") extended the 'vmap_block' structure to contain a
'cpu' field which is set at allocation time to the id of the initialising
CPU.
When a new 'vmap_block' is being instantiated by new_vmap_block(), the
partially initialised structure is added to the local 'vmap_block_queue'
xarray before the 'cpu' field has been initialised. If another CPU is
concurrently walking the xarray (e.g. via vm_unmap_aliases()), then it
may perform an out-of-bounds access to the remote queue thanks to an
uninitialised index.
This has been observed as UBSAN errors in Android:
| Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
|
| Call trace:
| purge_fragmented_block+0x204/0x21c
| _vm_unmap_aliases+0x170/0x378
| vm_unmap_aliases+0x1c/0x28
| change_memory_common+0x1dc/0x26c
| set_memory_ro+0x18/0x24
| module_enable_ro+0x98/0x238
| do_init_module+0x1b0/0x310
Move the initialisation of 'vb->cpu' in new_vmap_block() ahead of the
addition to the xarray.
Link: https://lkml.kernel.org/r/20240812171606.17486-1-will@kernel.org
Fixes: 8c61291fd8 ("mm: fix incorrect vbq reference in purge_fragmented_block")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Cc: Hailong.Liu <hailong.liu@oppo.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The __NR_mmap isn't found on armhf. The mmap() is commonly available
system call and its wrapper is present on all architectures. So it should
be used directly. It solves problem for armhf and doesn't create problem
for other architectures.
Remove sys_mmap() functions as they aren't doing anything else other than
calling mmap(). There is no need to set errno = 0 manually as glibc
always resets it.
For reference errors are as following:
CC seal_elf
seal_elf.c: In function 'sys_mmap':
seal_elf.c:39:33: error: '__NR_mmap' undeclared (first use in this function)
39 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
mseal_test.c: In function 'sys_mmap':
mseal_test.c:90:33: error: '__NR_mmap' undeclared (first use in this function)
90 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
Link: https://lkml.kernel.org/r/20240809082511.497266-1-usama.anjum@collabora.com
Fixes: 4926c7a52d ("selftest mm/mseal memory sealing")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- x2apic_disable() clears x2apic_state and x2apic_mode unconditionally,
even when the state is X2APIC_ON_LOCKED, which prevents the kernel to
disable it thereby creating inconsistent state.
Reorder the logic so it actually works correctly
- The XSTATE logic for handling LBR is incorrect as it assumes that
XSAVES supports LBR when the CPU supports LBR. In fact both conditions
need to be true. Otherwise the enablement of LBR in the IA32_XSS MSR
fails and subsequently the machine crashes on the next XRSTORS
operation because IA32_XSS is not initialized.
Cache the XSTATE support bit during init and make the related functions
use this cached information and the LBR CPU feature bit to cure this.
- Cure a long standing bug in KASLR
KASLR uses the full address space between PAGE_OFFSET and vaddr_end to
randomize the starting points of the direct map, vmalloc and vmemmap
regions. It thereby limits the size of the direct map by using the
installed memory size plus an extra configurable margin for hot-plug
memory. This limitation is done to gain more randomization space
because otherwise only the holes between the direct map, vmalloc,
vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel, so
the memory hot-plug and resource management related code paths still
operate under the assumption that the available address space can be
determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of the
direct map and if unlucky this address is in the vmalloc space, which
causes high_memory to become greater than VMALLOC_START and consequently
causes iounmap() to fail for valid ioremap addresses.
Cure this by exposing the end of the direct map via PHYSMEM_END and use
that for the memory hot-plug and resource management related places
instead of relying on MAX_PHYSMEM_BITS. In the KASLR case PHYSMEM_END
maps to a variable which is initialized by the KASLR initialization and
otherwise it is based on MAX_PHYSMEM_BITS as before.
- Prevent a data leak in mmio_read(). The TDVMCALL exposes the value of
an initialized variabled on the stack to the VMM. The variable is only
required as output value, so it does not have to exposed to the VMM in
the first place.
- Prevent an array overrun in the resource control code on systems with
Sub-NUMA Clustering enabled because the code failed to adjust the index
by the number of SNC nodes per L3 cache.
-----BEGIN PGP SIGNATURE-----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=T4i1
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- x2apic_disable() clears x2apic_state and x2apic_mode unconditionally,
even when the state is X2APIC_ON_LOCKED, which prevents the kernel to
disable it thereby creating inconsistent state.
Reorder the logic so it actually works correctly
- The XSTATE logic for handling LBR is incorrect as it assumes that
XSAVES supports LBR when the CPU supports LBR. In fact both
conditions need to be true. Otherwise the enablement of LBR in the
IA32_XSS MSR fails and subsequently the machine crashes on the next
XRSTORS operation because IA32_XSS is not initialized.
Cache the XSTATE support bit during init and make the related
functions use this cached information and the LBR CPU feature bit to
cure this.
- Cure a long standing bug in KASLR
KASLR uses the full address space between PAGE_OFFSET and vaddr_end
to randomize the starting points of the direct map, vmalloc and
vmemmap regions. It thereby limits the size of the direct map by
using the installed memory size plus an extra configurable margin for
hot-plug memory. This limitation is done to gain more randomization
space because otherwise only the holes between the direct map,
vmalloc, vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel,
so the memory hot-plug and resource management related code paths
still operate under the assumption that the available address space
can be determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of
the direct map and if unlucky this address is in the vmalloc space,
which causes high_memory to become greater than VMALLOC_START and
consequently causes iounmap() to fail for valid ioremap addresses.
Cure this by exposing the end of the direct map via PHYSMEM_END and
use that for the memory hot-plug and resource management related
places instead of relying on MAX_PHYSMEM_BITS. In the KASLR case
PHYSMEM_END maps to a variable which is initialized by the KASLR
initialization and otherwise it is based on MAX_PHYSMEM_BITS as
before.
- Prevent a data leak in mmio_read(). The TDVMCALL exposes the value of
an initialized variabled on the stack to the VMM. The variable is
only required as output value, so it does not have to exposed to the
VMM in the first place.
- Prevent an array overrun in the resource control code on systems with
Sub-NUMA Clustering enabled because the code failed to adjust the
index by the number of SNC nodes per L3 cache.
* tag 'x86-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix arch_mbm_* array overrun on SNC
x86/tdx: Fix data leak in mmio_read()
x86/kaslr: Expose and use the end of the physical memory address space
x86/fpu: Avoid writing LBR bit to IA32_XSS unless supported
x86/apic: Make x2apic_disable() work correctly
Haswell PMUs suffer from several errata and require to limit the minimal
period for counter events, otherwise they suffer from endless loops in
the PMU interrupt.
-----BEGIN PGP SIGNATURE-----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=kGa7
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single fix for x86 performance monitoring.
Haswell PMUs suffer from several errata and require a limit the
minimal period for counter events, otherwise they suffer from endless
loops in the PMU interrupt"
* tag 'perf-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Limit the period on Haswell
The deadlock detection code drops into an infinite scheduling loop while
still holding rt_mutex::wait_lock, which rightfully triggers a
'scheduling in atomic' warning. Unlock it before that.
-----BEGIN PGP SIGNATURE-----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=B3iX
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2024-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for rt_mutex.
The deadlock detection code drops into an infinite scheduling loop
while still holding rt_mutex::wait_lock, which rightfully triggers a
'scheduling in atomic' warning.
Unlock it before that"
* tag 'locking-urgent-2024-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Drop rt_mutex::wait_lock before scheduling
- Unbreak the PLIC driver for Allwinner D1 systems
The recent conversion of the PLIC driver to a platform driver broke
Allwinnder D1 systems due to the deferred probing of platform drivers.
Due to that the only timer available on D1 systems cannot get an
interrupt, which causes the system to hang at boot. Other RISCV
platforms are not affected because they provide the architected SBI
timer which uses the built in core interrupt controller.
Cure this by probing PLIC early on D1 systems
- Cure a regression in ARM/GIC-V3 on 32-bit ARM systems caused by the
recent addition of a initialization function, which accesses system
registers before they are enabled. On 64-bit ARM they are enabled
prior to that by sheer luck.
Ensure they are enabled.
- Cure a use before check problem in the MSI library. The existing NULL
pointer check is too late.
- Cure a lock order inversion in the ARM/GIC-V4 driver
- Fix a IS_ERR() vs. NULL pointer check issue in the RISCV APLIC driver
- Plug a reference count leak in the ARM/GIC-V2 driver
-----BEGIN PGP SIGNATURE-----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=L+kH
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2024-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Unbreak the PLIC driver for Allwinner D1 systems
The recent conversion of the PLIC driver to a platform driver broke
Allwinnder D1 systems due to the deferred probing of platform
drivers.
Due to that the only timer available on D1 systems cannot get an
interrupt, which causes the system to hang at boot. Other RISCV
platforms are not affected because they provide the architected SBI
timer which uses the built in core interrupt controller.
Cure this by probing PLIC early on D1 systems
- Cure a regression in ARM/GIC-V3 on 32-bit ARM systems caused by the
recent addition of a initialization function, which accesses system
registers before they are enabled. On 64-bit ARM they are enabled
prior to that by sheer luck.
Ensure they are enabled.
- Cure a use before check problem in the MSI library. The existing
NULL pointer check is too late.
- Cure a lock order inversion in the ARM/GIC-V4 driver
- Fix a IS_ERR() vs. NULL pointer check issue in the RISCV APLIC
driver
- Plug a reference count leak in the ARM/GIC-V2 driver"
* tag 'irq-urgent-2024-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Check for NULL ops in msi_lib_irq_domain_select()
irqchip/gic-v3: Init SRE before poking sysregs
irqchip/gic-v2m: Fix refcount leak in gicv2m_of_init()
irqchip/riscv-aplic: Fix an IS_ERR() vs NULL bug in probe()
irqchip/gic-v4: Fix ordering between vmapp and vpe locks
irqchip/sifive-plic: Probe plic driver early for Allwinner D1 platform
Matt Johnston says:
====================
net: mctp-serial: Fix for missing tx escapes
The mctp-serial code to add escape characters was incorrect due to an
off-by-one error. This series adds a test for the chunking which splits
by escape characters, and fixes the bug.
v2: Fix kunit param const pointer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
0x7d and 0x7e bytes are meant to be escaped in the data portion of
frames, but this didn't occur since next_chunk_len() had an off-by-one
error. That also resulted in the final byte of a payload being written
as a separate tty write op.
The chunk prior to an escaped byte would be one byte short, and the
next call would never test the txpos+1 case, which is where the escaped
byte was located. That meant it never hit the escaping case in
mctp_serial_tx_work().
Example Input: 01 00 08 c8 7e 80 02
Previous incorrect chunks from next_chunk_len():
01 00 08
c8 7e 80
02
With this fix:
01 00 08 c8
7e
80 02
Cc: stable@vger.kernel.org
Fixes: a0c2ccd9b5 ("mctp: Add MCTP-over-serial transport binding")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test various edge cases of inputs that contain characters
that need escaping.
This adds a new kunit suite for mctp-serial.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the LTC2991, V5 and V6 channels use the low nibble of the
"V5, V6, V7, and V8 Control Register" for configuration, but currently,
the high nibble is defined.
This patch changes the defines to use the low nibble.
Fixes: 2b9ea4262a ("hwmon: Add driver for ltc2991")
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Message-ID: <20240830111349.30531-1-paweldembicki@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The fscache_cookie_lru_timer is initialized when the fscache module
is inserted, but is not deleted when the fscache module is removed.
If timer_reduce() is called before removing the fscache module,
the fscache_cookie_lru_timer will be added to the timer list of
the current cpu. Afterwards, a use-after-free will be triggered
in the softIRQ after removing the fscache module, as follows:
==================================================================
BUG: unable to handle page fault for address: fffffbfff803c9e9
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 21ffea067 P4D 21ffea067 PUD 21ffe6067 PMD 110a7c067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G W 6.11.0-rc3 #855
Tainted: [W]=WARN
RIP: 0010:__run_timer_base.part.0+0x254/0x8a0
Call Trace:
<IRQ>
tmigr_handle_remote_up+0x627/0x810
__walk_groups.isra.0+0x47/0x140
tmigr_handle_remote+0x1fa/0x2f0
handle_softirqs+0x180/0x590
irq_exit_rcu+0x84/0xb0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:default_idle+0xf/0x20
default_idle_call+0x38/0x60
do_idle+0x2b5/0x300
cpu_startup_entry+0x54/0x60
start_secondary+0x20d/0x280
common_startup_64+0x13e/0x148
</TASK>
Modules linked in: [last unloaded: netfs]
==================================================================
Therefore delete fscache_cookie_lru_timer when removing the fscahe module.
Fixes: 12bb21a29c ("fscache: Implement cookie user counting and resource pinning")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240826112056.2458299-1-libaokun@huaweicloud.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l4NV
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix
-----BEGIN PGP SIGNATURE-----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=LTM8
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs
Push bcachefs fixes from Kent Overstreet:
"The data corruption in the buffered write path is troubling; inode
lock should not have been able to cause that...
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix"
* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
bcachefs: Mark more errors as autofix
bcachefs: Revert lockless buffered IO path
bcachefs: Fix bch2_extents_match() false positive
bcachefs: Fix failure to return error in data_update_index_update()
raw_copy_{to,from}_user() do not call access_ok(), so this code allowed
userspace to access any virtual memory address.
Cc: stable@vger.kernel.org
Fixes: 7c83232161 ("riscv: add support for misaligned trap handling in S-mode")
Fixes: 441381506b ("riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240815005714.1163136-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.
note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a report of data corruption on nixos when building installer
images.
https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334
It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.
Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.
It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.
Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.
My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.
Fixes: 7e64c86cdc ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull misc fixes from Guenter Roeck.
These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
apparmor: fix policy_unpack_test on big endian systems
Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
microblaze: don't treat zero reserved memory regions as error
- set the direction of the wlan-enable GPIO to output after requesting
it as-is
-----BEGIN PGP SIGNATURE-----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=VM4v
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
"A follow-up fix for the power sequencing subsystem. It turned out the
previous fix for this driver was incomplete and broke the WLAN support
on some platforms. This addresses the issue.
- set the direction of the wlan-enable GPIO to output after
requesting it as-is"
* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
Commit a9aaf1ff88 ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.
Fixes: a9aaf1ff88 ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZtNVTw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqWwCgmITg5Owdigw+ejnkLJ4Q/CHYfRkAoLh7nkcm
kaX7IqZLgVDr4rvgVcmR
=azoE
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add MeiG Smart SRM825L
usb: cdnsp: fix for Link TRB with TC
usb: dwc3: st: add missing depopulate in probe error path
usb: dwc3: st: fix probed platform device ref count on probe error path
usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
usb: typec: fsa4480: Relax CHIP_ID check
usb: dwc3: xilinx: add missing depopulate in probe error path
usb: dwc3: omap: add missing depopulate in probe error path
dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
usb: gadget: uvc: queue pump work in uvcg_video_enable()
cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
usb: dwc3: core: Prevent USB core invalid event buffer address access
MAINTAINERS: Mark UVC gadget driver as orphan
Minor fixes only. The sd.c one ignores a sync cache request if format
is in progress which can happen if formatting a drive across
suspend/resume.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZtM61CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZ+yAQDz47pp
ZEr9bOMueiIYs+ZpmK1KRBHviFApXr9JJGzoHAD/WsUN43+5+y12QhGWSA0/M4qo
Tog2K3HXvb4kIsDoXEg=
=n2gm
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
- One more write delegation fix
-----BEGIN PGP SIGNATURE-----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=uoNK
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- One more write delegation fix
* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
* Do not call out v1 inodes with non-zero di_nlink field as being corrupt.
* Change xfs_finobt_count_blocks() to count "free inode btree" blocks rather
than "inode btree" blocks.
* Don't report the number of trimmed bytes via FITRIM because the underlying
storage isn't required to do anything and failed discard IOs aren't
reported to the caller anyway.
* Fix incorrect setting of rm_owner field in an rmap query.
* Report missing disk offset range in an fsmap query.
* Obtain m_growlock when extending realtime section of the filesystem.
* Reset rootdir extent size hint after extending realtime section of the
filesystem.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZs3OYgAKCRAH7y4RirJu
9OF/AP9MXSSmBHmTfpqJZbKCI9j+EvAGyucbITi32ZBnbnNnKgEAr5FrueGcKS98
H/FxMeNbSWZp0s5hUYsXsACtdo75YgE=
=prEp
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Do not call out v1 inodes with non-zero di_nlink field as being
corrupt
- Change xfs_finobt_count_blocks() to count "free inode btree" blocks
rather than "inode btree" blocks
- Don't report the number of trimmed bytes via FITRIM because the
underlying storage isn't required to do anything and failed discard
IOs aren't reported to the caller anyway
- Fix incorrect setting of rm_owner field in an rmap query
- Report missing disk offset range in an fsmap query
- Obtain m_growlock when extending realtime section of the filesystem
- Reset rootdir extent size hint after extending realtime section of
the filesystem
* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reset rootdir extent size hint after growfsrt
xfs: take m_growlock when running growfsrt
xfs: Fix missing interval for missing_owner in xfs fsmap
xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
xfs: Fix the owner setting issue for rmap query in xfs fsmap
xfs: don't bother reporting blocks trimmed via FITRIM
xfs: xfs_finobt_count_blocks() walks the wrong btree
xfs: fix folio dirtying for XFILE_ALLOC callers
xfs: fix di_onlink checking for V1/V2 inodes
There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the
newly added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well
as runtime problems in the tzmem and scm firmware, the USB Type-C
driver, and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is proportional
to the number of supported machines. This includes both warning fixes
and correctness for the 64-bit i.MX9, i.MX8 and layerscape platforms,
as well as a single fix for a 32-bit i.MX6 based board.
The other changes are the usual minor changes, including an update to the
MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs (risc-v).
-----BEGIN PGP SIGNATURE-----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=tK5m
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where timeout condition is incorrectly reported for
all extended Cypress commands.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZtI2cgAKCRBAj56VGEWX
nJGNAQCYR/VQOtGBoIo4/0VdxxH6qTuLu7XhWbBdzgx8ee6t6gD/Rj94mEpOh12V
JEd3MiDdEtQt5KwwdkzUyiHYJ0x1WAw=
=PzXA
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where a timeout condition is incorrectly reported for
all extended Cypress commands
* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cypress_ps2 - fix waiting for command response
