This patch is to move tlb flush in kvm_set_pte_rmapp() to
kvm_mmu_notifier_change_pte() in order to avoid redundant tlb flush.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The patch is to make kvm_set_spte_hva() return int and caller can
check return value to determine flush tlb or not.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch is to replace kvm_flush_remote_tlbs() with kvm_flush_
remote_tlbs_with_address() in some functions without logic change.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch is to add wrapper functions for tlb_remote_flush_with_range
callback and flush tlb directly in kvm_mmu_zap_collapsible_spte().
kvm_mmu_zap_collapsible_spte() returns flush request to the
slot_handle_leaf() and the latter does flush on demand. When
range flush is available, make kvm_mmu_zap_collapsible_spte()
to flush tlb with range directly to avoid returning range back
to slot_handle_leaf().
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch is to register tlb_remote_flush_with_range callback with
hv tlb range flush interface.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V provides HvFlushGuestAddressList() hypercall to flush EPT tlb
with specified ranges. This patch is to add the hypercall support.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add flush range call back in the kvm_x86_ops and platform can use it
to register its associated function. The parameter "kvm_tlb_range"
accepts a single range and flush list which contains a list of ranges.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, Intel Processor Trace do not support tracing in L1 guest
VMX operation(IA32_VMX_MISC[bit 14] is 0). As mentioned in SDM,
on these type of processors, execution of the VMXON instruction will
clears IA32_RTIT_CTL.TraceEn and any attempt to write IA32_RTIT_CTL
causes a general-protection exception (#GP).
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To save performance overhead, disable intercept Intel PT MSRs
read/write when Intel PT is enabled in guest.
MSR_IA32_RTIT_CTL is an exception that will always be intercepted.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implement Intel Processor Trace MSRs read/write
emulation.
Intel PT MSRs read/write need to be emulated when Intel PT
MSRs is intercepted in guest and during live migration.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize the Intel PT configuration when cpuid update.
Include cpuid inforamtion, rtit_ctl bit mask and the number of
address ranges.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Load/Store Intel Processor Trace register in context switch.
MSR IA32_RTIT_CTL is loaded/stored automatically from VMCS.
In Host-Guest mode, we need load/resore PT MSRs only when PT
is enabled in guest.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose Intel Processor Trace to guest only when
the PT works in Host-Guest mode.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel Processor Trace virtualization can be work in one
of 2 possible modes:
a. System-Wide mode (default):
When the host configures Intel PT to collect trace packets
of the entire system, it can leave the relevant VMX controls
clear to allow VMX-specific packets to provide information
across VMX transitions.
KVM guest will not aware this feature in this mode and both
host and KVM guest trace will output to host buffer.
b. Host-Guest mode:
Host can configure trace-packet generation while in
VMX non-root operation for guests and root operation
for native executing normally.
Intel PT will be exposed to KVM guest in this mode, and
the trace output to respective buffer of host and guest.
In this mode, tht status of PT will be saved and disabled
before VM-entry and restored after VM-exit if trace
a virtual machine.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds support for "output to Trace Transport subsystem"
capability of Intel PT. It means that PT can output its
trace to an MMIO address range rather than system memory buffer.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add bit definitions for Intel PT MSRs to support trace output
directed to the memeory subsystem and holds a count if packet
bytes that have been sent out.
These are required by the upcoming PT support in KVM guests
for MSRs read/write emulation.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
intel_pt_validate_hw_cap() validates whether a given PT capability is
supported by the hardware. It checks the PT capability array which
reflects the capabilities of the hardware on which the code is executed.
For setting up PT for KVM guests this is not correct as the capability
array for the guest can be different from the host array.
Provide a new function to check against a given capability array.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pt_cap_get() is required by the upcoming PT support in KVM guests.
Export it and move the capabilites enum to a global header.
As a global functions, "pt_*" is already used for ptrace and
other things, so it makes sense to use "intel_pt_*" as a prefix.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Intel Processor Trace (PT) MSR bit defines are in a private
header. The upcoming support for PT virtualization requires these defines
to be accessible from KVM code.
Move them to the global MSR header file.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM has KVM_CAP_ARM_VM_IPA_SIZE we can test with > 40-bit IPAs by
using the 'type' field of KVM_CREATE_VM.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
We need to reset the offset for each mode as it will change
depending on the number of guest physical address bits.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
There's no reason not to always test the topmost physical
addresses, and if the user wants to try lower addresses
then '-p' (used to be '-o before this patch) can be used.
Let's remove the '-t' option and just always do what it did.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
It isn't necessary and can even cause problems when testing high
guest physical addresses. This patch leaves the test memory id-
mapped by default, but when using '-t' the test memory virtual
addresses stay the same even though the physical addresses switch
to the topmost valid addresses.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
[Preserved the iff and a probably intentional weird bracket notation.
Also dropped the style change to make a single-purpose patch. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Although well-intentioned, keeping the KF() definition as a hint for
handling scattered CPUID features may be counter-productive. Simply
redefining the bit position only works for directly manipulating the
guest's CPUID leafs, e.g. it doesn't make guest_cpuid_has() magically
work. Taking an alternative approach, e.g. ensuring the bit position
is identical between the Linux-defined and hardware-defined features,
may be a simpler and/or more effective method of exposing scattered
features to the guest.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Let the guest read the IA32_TSC MSR with the generic RDMSR instruction
as well as the specific RDTSC(P) instructions. Note that the hardware
applies the TSC multiplier and offset (when applicable) to the result of
RDMSR(IA32_TSC), just as it does to the result of RDTSC(P).
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
According to the SDM, "NMI-window exiting" VM-exits wake a logical
processor from the same inactive states as would an NMI and
"interrupt-window exiting" VM-exits wake a logical processor from the
same inactive states as would an external interrupt. Specifically, they
wake a logical processor from the shutdown state and from the states
entered using the HLT and MWAIT instructions.
Fixes: 6dfacadd58 ("KVM: nVMX: Add support for activity state HLT")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Squashed comments of two Jim's patches and used the simplified code
hunk provided by Sean. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Currently, the nested guest's PAUSE intercept intentions are not being
honored. Instead, since the L0 hypervisor's pause_filter_count and
pause_filter_thresh values are still in place, these values are used
instead of those programmed in the VMCB by the L1 hypervisor.
To honor the desired PAUSE intercept support of the L1 hypervisor, the L0
hypervisor must use the PAUSE filtering fields of the L1 hypervisor. This
requires saving and restoring of both the L0 and L1 hypervisor's PAUSE
filtering fields.
Signed-off-by: William Tambe <william.tambe@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Since the offset is added directly to the hva from the
gfn_to_hva_cache, a negative offset could result in an out of bounds
write. The existing BUG_ON only checks for addresses beyond the end of
the gfn_to_hva_cache, not for addresses before the start of the
gfn_to_hva_cache.
Note that all current call sites have non-negative offsets.
Fixes: 4ec6e86362 ("kvm: Introduce kvm_write_guest_offset_cached()")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Cfir Cohen <cfir@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Previously, in the case where (gpa + len) wrapped around, the entire
region was not validated, as the comment claimed. It doesn't actually
seem that wraparound should be allowed here at all.
Furthermore, since some callers don't check the return code from this
function, it seems prudent to clear ghc->memslot in the event of an
error.
Fixes: 8f964525a1 ("KVM: Allow cross page reads and writes from cached translations.")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Cfir Cohen <cfir@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When we get a report like
==== Test Assertion Failure ====
x86_64/state_test.c:157: run->exit_reason == KVM_EXIT_IO
pid=955 tid=955 - Success
1 0x0000000000401350: main at state_test.c:154
2 0x00007fc31c9e9412: ?? ??:0
3 0x000000000040159d: _start at ??:?
Unexpected exit reason: 8 (SHUTDOWN),
it is not obvious which particular stage failed. Add the info.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
AMD doesn't seem to implement MSR_IA32_MCG_EXT_CTL and svm code in kvm
knows nothing about it, however, this MSR is among emulated_msrs and
thus returned with KVM_GET_MSR_INDEX_LIST. The consequent KVM_GET_MSRS,
of course, fails.
Report the MSR as unsupported to not confuse userspace.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The memory allocation in b666a4b697 ("kvm: x86: Dynamically allocate
guest_fpu", 2018-11-06) is wrong, there are other members in struct fpu
before the fpregs_state union and the patch should be doing something
similar to the code in fpu__init_task_struct_size. It's enough to run
a guest and then rmmod kvm to see slub errors which are actually caused
by memory corruption.
For now let's revert it to sizeof(struct fpu), which is conservative.
I have plans to move fsave/fxsave/xsave directly in KVM, without using
the kernel FPU helpers, and once it's done, the size of the object in
the cache will be something like kvm_xstate_size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The main new feature this time is support in HV nested KVM for passing
a device that is emulated by a level 0 hypervisor and presented to
level 1 as a PCI device through to a level 2 guest using VFIO.
Apart from that there are improvements for migration of radix guests
under HV KVM and some other fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJcGFzEAAoJEJ2a6ncsY3GfKjoH/Azcf8QIO5ftyHrjazFZOSUh
5Lr24HZTYHheowp6obzuZWRAIyckHmflRmOkv8RVGuA8+Sp+m5pBxN3WTVPOwDUh
WanOWVGJsuhl6qATmkm7xIxmYhQEyLxVNbnWva7WXuZ92rgGCNfHtByHWAx/7vTe
q5Shr4fLIQ8HRzor8Xqqph1I0hQNTE9VsaK1hW/PxI0gsO8qjDwOR8SDpT/aaJrS
Sir+lM0TwCbJREuObDxYAXn1OWy8rMYjlb9fEBv5tmPCQKiB9vJz4tV+ahR9eJ14
PEF57MoBOGwzQXo4geFLuo/Bu8fDygKsKQX1eYGcn6tRGA4pnTxzYl0+dHLBkOM=
=3WkD
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
PPC KVM update for 4.21 from Paul Mackerras
The main new feature this time is support in HV nested KVM for passing
a device that is emulated by a level 0 hypervisor and presented to
level 1 as a PCI device through to a level 2 guest using VFIO.
Apart from that there are improvements for migration of radix guests
under HV KVM and some other fixes and cleanups.
Just two small fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=GVCX
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes for 4.21
Just two small fixes.
- Large PUD support for HugeTLB
- Single-stepping fixes
- Improved tracing
- Various timer and vgic fixups
-----BEGIN PGP SIGNATURE-----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=SiUI
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for 4.21
- Large PUD support for HugeTLB
- Single-stepping fixes
- Improved tracing
- Various timer and vgic fixups
They were missing, and it turns out that we do need them now.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
32 and 64bit use different symbols to identify the traps.
32bit has a fine grained approach (prefetch abort, data abort and HVC),
while 64bit is pretty happy with just "trap".
This has been fine so far, except that we now need to decode some
of that in tracepoints that are common to both architectures.
Introduce ARM_EXCEPTION_IS_TRAP which abstracts the trap symbols
and make the tracepoint use it.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Although bit 31 of VTCR_EL2 is RES1, we inadvertently end up setting all
of the upper 32 bits to 1 as well because we define VTCR_EL2_RES1 as
signed, which is sign-extended when assigning to kvm->arch.vtcr.
Lucky for us, the architecture currently treats these upper bits as RES0
so, whilst we've been naughty, we haven't set fire to anything yet.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There are two things we need to take care of when we create block
mappings in the stage 2 page tables:
(1) The alignment within a PMD between the host address range and the
guest IPA range must be the same, since otherwise we end up mapping
pages with the wrong offset.
(2) The head and tail of a memory slot may not cover a full block
size, and we have to take care to not map those with block
descriptors, since we could expose memory to the guest that the host
did not intend to expose.
So far, we have been taking care of (1), but not (2), and our commentary
describing (1) was somewhat confusing.
This commit attempts to factor out the checks of both into a common
function, and if we don't pass the check, we won't attempt any PMD
mappings for neither hugetlbfs nor THP.
Note that we used to only check the alignment for THP, not for
hugetlbfs, but as far as I can tell the check needs to be applied to
both scenarios.
Cc: Ralph Palutke <ralph.palutke@fau.de>
Cc: Lukas Braun <koomi@moshbit.net>
Reported-by: Lukas Braun <koomi@moshbit.net>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently only halt the guest when a vCPU messes with the active
state of an SPI. This is perfectly fine for GICv2, but isn't enough
for GICv3, where all vCPUs can access the state of any other vCPU.
Let's broaden the condition to include any GICv3 interrupt that
has an active state (i.e. all but LPIs).
Cc: stable@vger.kernel.org
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We're pretty blind when it comes to system register tracing,
and rely on the ESR value displayed by kvm_handle_sys, which
isn't much.
Instead, let's add an actual name to the sysreg entries, so that
we can finally print it as we're about to perform the access
itself.
The new tracepoint is conveniently called kvm_sys_access.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
vcpu_read_sys_reg should not be modifying the VCPU structure.
Eventually, to handle EL2 sysregs for nested virtualization, we will
call vcpu_read_sys_reg from places that have a const vcpu pointer, which
will complain about the lack of the const modifier on the read path.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm_timer_vcpu_terminate can only be called in two scenarios:
1. As part of cleanup during a failed VCPU create
2. As part of freeing the whole VM (struct kvm refcount == 0)
In the first case, we cannot have programmed any timers or mapped any
IRQs, and therefore we do not have to cancel anything or unmap anything.
In the second case, the VCPU will have gone through kvm_timer_vcpu_put,
which will have canceled the emulated physical timer's hrtimer, and we
do not need to that here as well. We also do not care if the irq is
recorded as mapped or not in the VGIC data structure, because the whole
VM is going away. That leaves us only with having to ensure that we
cancel the bg_timer if we were blocking the last time we called
kvm_timer_vcpu_put().
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The use of a work queue in the hrtimer expire function for the bg_timer
is a leftover from the time when we would inject interrupts when the
bg_timer expired.
Since we are no longer doing that, we can instead call
kvm_vcpu_wake_up() directly from the hrtimer function and remove all
workqueue functionality from the arch timer code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
