DPI hasn't really been used up until now, so the default has
been meaningless.
In theory we should be able to pass the desired format for the
adjacent bridge chip through, but framework seems to be missing
for that.
As the main device to use DPI is the VGA666 or Adafruit Kippah,
both of which use RGB666, change the default to being RGB666 instead
of RGB888.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-6-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The VC4 DPI output can support multiple BGR666 variants, but they were
never added to the driver. Let's add the the support for those formats.
Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-5-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The RGB565 format with padding over 24 bits
(MEDIA_BUS_FMT_RGB565_1X24_CPADHI) is supported by the vc4 DPI
controller. This is what the Geekworm MZP280 DPI display uses, so let's
add support for it in the DPI controller driver.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-4-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X24_CPADHI supported by the
RaspberryPi.
Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-3-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X18 supported by the
RaspberryPi.
Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-2-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add the MEDIA_BUS_FMT_RGB565_1X24_CPADHI format used by the Geekworm
MZP280 panel for the Raspberry Pi.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-1-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The len variable is used while uninitialized. Initialize it.
Fixes: 1e4a91db10 ("drm/probe-helper: Provide a TV get_modes helper")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221201090736.290935-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The mode name in struct drm_cmdline_mode can hold 32 characters at most,
which can easily get overrun. Switch to strscpy() to prevent such a
thing.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527354 ("Security best practices violations")
Fixes: a7ab155397 ("drm/modes: Switch to named mode descriptors")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221128081938.742410-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The underline length for the new Analog TV properties section doesn't
match the title length, resulting in a warning.
Fixes: 7d63cd8526 ("drm/connector: Add TV standard property")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221128081938.742410-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Change min cursor size of vkms driver from 20 to 10, to increase the IGT
test coverage of vkms by enabling 32x10 cursor size subtests in
kms_cursor_crc
Signed-off-by: Alaa Emad <aemad@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109113945.20938-1-aemad@igalia.com
A null-ptr-deref is triggered when it tries to destroy the workqueue in
vkms->output.composer_workq in vkms_release().
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf #24
RIP: 0010:destroy_workqueue+0x2f/0x710
...
Call Trace:
<TASK>
? vkms_config_debugfs_init+0x50/0x50 [vkms]
__devm_drm_dev_alloc+0x15a/0x1c0 [drm]
vkms_init+0x245/0x1000 [vkms]
do_one_initcall+0xd0/0x4f0
do_init_module+0x1a4/0x680
load_module+0x6249/0x7110
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The reason is that an OOM happened which triggers the destroy of the
workqueue, however, the workqueue is alloced in the later process,
thus a null-ptr-deref happened. A simple call graph is shown as below:
vkms_init()
vkms_create()
devm_drm_dev_alloc()
__devm_drm_dev_alloc()
devm_drm_dev_init()
devm_add_action_or_reset()
devm_add_action() # an error happened
devm_drm_dev_init_release()
drm_dev_put()
kref_put()
drm_dev_release()
vkms_release()
destroy_workqueue() # null-ptr-deref happened
vkms_modeset_init()
vkms_output_init()
vkms_crtc_init() # where the workqueue get allocated
Fix this by checking if composer_workq is NULL before passing it to
the destroy_workqueue() in vkms_release().
Fixes: 6c234fe37c ("drm/vkms: Implement CRC debugfs API")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-3-yuancan@huawei.com
A memory leak was reported after the vkms module install failed.
unreferenced object 0xffff88810bc28520 (size 16):
comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s)
hex dump (first 16 bytes):
01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............
backtrace:
[<00000000e7561ff8>] kmalloc_trace+0x27/0x60
[<000000000b1954a0>] 0xffffffffc45200a9
[<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0
[<000000001505ee87>] do_init_module+0x1a4/0x680
[<00000000958079ad>] load_module+0x6249/0x7110
[<00000000117e4696>] __do_sys_finit_module+0x140/0x200
[<00000000f74b12d2>] do_syscall_64+0x35/0x80
[<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
The reason is that the vkms_init() returns without checking the return
value of vkms_create(), and if the vkms_create() failed, the config
allocated at the beginning of vkms_init() is leaked.
vkms_init()
config = kmalloc(...) # config allocated
...
return vkms_create() # vkms_create failed and config is leaked
Fix this problem by checking return value of vkms_create() and free the
config if error happened.
Fixes: 2df7af93fd ("drm/vkms: Add vkms_config type")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-2-yuancan@huawei.com
Avoid the panel oscillating on and off during boot. In some cases it
will be more than 1000ms between powering the panel to read the EDID early
during boot, and enabling the panel for display. Extending the
autosuspend delay avoids autosuspending during this interval.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.5.I96ce2a565ff893eddcbee70174c991179311a3ae@changeid
ktime_get_boottime continues while the device is suspended. This change
ensures that the resume path will not be delayed if the power off delay
has already been met while the device is suspended
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.3.Iebd9f79aba0a62015fd2383fe6986c2d6fe12cfd@changeid
ktime_get_boottime continues while the device is suspended. This change
ensures that the resume path will not be delayed if the power off delay
has already been met while the device is suspended
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.2.Iebd9f79aba0a62015fd2383fe6986c2d6fe12cfd@changeid
ktime_get is based on CLOCK_MONOTONIC which stops on suspend. On
suspend, the time that the panel was powerd off is recorded with
ktime_get, and on resume this time is compared to the current ktime_get
time to determine if the driver should wait for the panel to power down
completely before re-enabling it.
Because we're using ktime_get, this delay doesn't account for the time
that the device is suspended, during which the power down delay may have
already elapsed.
Change to use ktime_get_boottime throughout, which uses CLOCK_BOOTTIME
which does not stop when suspended. This ensures that the resume path
will not be delayed if the power off delay has already been met while
the device is suspended.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.1.I51639dc112bbbe27259df6bdad56dbabd655d91a@changeid
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-37-uwe@kleine-koenig.org
A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is
triggered with the following log given:
[ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting...
insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy
The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver()
directly without checking its return value, if i2c_add_driver() failed,
it returns without calling i2c_del_driver() on the previous i2c driver,
resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed
later.
A simple call graph is shown as below:
stdpxxxx_ge_b850v3_init()
i2c_add_driver(&stdp4028_ge_b850v3_fw_driver)
i2c_add_driver(&stdp2690_ge_b850v3_fw_driver)
i2c_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without delete stdp4028_ge_b850v3_fw_driver
Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when
i2c_add_driver() returns error.
Fixes: fcfa0ddc18 ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com
drm_kunit_device_init() is a public function meant to be used by other
tests, but isn't exported. This leads to modpost errors when the other
tests are compiled as module.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128081938.742410-3-maxime@cerno.tech
Commit f0601ef863 ("drm/vc4: vec: Protect device resources after
removal") add fail path for vc4_vec_encoder_enable(), and will put
usage_counter only when pm_runtime_get_sync() succeeds. However,
pm_runtime_get_sync() will increment usage_counter even it failed. Fix
it by replacing it with pm_runtime_resume_and_get() to keep usage
counter balanced.
Fixes: e4b81f8c74 ("drm/vc4: Add support for the VEC (Video Encoder) IP")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221124015113.18540-1-shangxiaojing@huawei.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
It's fairly hard to figure out the instance of the CRTC affected by an
atomic change using the default name.
Since we can provide our own to the CRTC initialization functions, let's
do so to make the debugging sessions easier.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-20-051a0bb60a16@cerno.tech
Both users of vc4_crtc_init need the same extra initialization to set
the pointer to the platform_device and the CRTC data. Since it's
mandatory, let's make them both arguments of vc4_crtc_init().
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-17-051a0bb60a16@cerno.tech
The TXP is integrated as a separate CRTC/Encoder/Connector combo, but
for some reason doesn't rely on the vc4_encoder type and it's associated
type.
Let's create a type to make it consistent with the other encoders.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-15-051a0bb60a16@cerno.tech
On the vc4 devices (and later), the blending is done by a single device
called the HVS. The HVS has three FIFO that can operate in parallel, and
route their output to 6 CRTCs and 7 encoders on the BCM2711.
Each of these CRTCs and encoders have some constraints on which FIFO
they can feed from, so we need some code to take all those constraints
into account and assign FIFOs to CRTCs.
The problem can be simplified by assigning those FIFOs to CRTCs by
ascending output index number. We had a comment mentioning it already,
but we were never actually enforcing it.
It was working still in most situations because the probe order is
roughly equivalent, except for the (optional, and fairly rarely used on
the Pi4) VEC which was last in the probe order sequence, but one of the
earliest device to assign.
This resulted in configurations that were rejected by our code but were
still valid with a different assignment.
We can fix this by making sure we assign CRTCs to FIFOs by ordering
them by ascending HVS output index.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-10-051a0bb60a16@cerno.tech
The vc4_hvs_get_(old|new)_global_state functions don't modify the
drm_atomic_state passed as an argument, so let's make it const.
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v1-13-051a0bb60a16@cerno.tech
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Freescale/NXP i.MX LCDIF and eLCDIF LCD controllers are only present on
Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXS ||
ARCH_MXC, to prevent asking the user about this driver when configuring
a kernel without Freescale/NXP i.MX support.
Fixes: 45d59d7040 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/98e74779ca2bc575d91afff03369e86b080c01ac.1669046358.git.geert+renesas@glider.be
The Freescale/NXP i.MX LCDIFv3 LCD controller is only present on
Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale/NXP i.MX support.
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/6103c1aa65a7888c12d351ae63f29850f29f42b9.1669046403.git.geert+renesas@glider.be
If no preferred value for bits-per-pixel has been given, fall back
to 32. Never use the preferred depth. The color depth is the number
of color/alpha bits per pixel, while bpp is the overall number of
bits in most cases.
Most noteworthy, XRGB8888 has a depth of 24 and a bpp value of 32.
Using depth for bpp would make the value 24 as well and format
selection in fbdev helpers fails. Unfortunately XRGB8888 is the most
common format and the old heuristic therefore fails for most of
the drivers (unless they implement the 24-bit RGB888 format).
Picking a bpp of 32 will later on result in a default depth of 24
and the format XRGB8888. As XRGB8888 is the default format for most
of the current and legacy graphics stack, all drivers must support
it. So it is the safe choice.
v2:
* fix commit-message typo (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-8-tzimmermann@suse.de
Set the preferred color depth to 24 bits and the fbdev bpp to 32
bits. This will signal XRGB8888 as default format to clients.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-7-tzimmermann@suse.de
Set the preferred depth from the format of the scanout buffer. The
value cannot be hardcoded, as the scanout buffer is only known at
runtime. Also derive the fbdev emulation's bpp value from the scanout
format.
v2:
* fix commit-message typo
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-6-tzimmermann@suse.de
Set the preferred depth from the format of the scanout buffer. The
value cannot be hardcoded, as the scanout buffer is only known at
runtime. Keeping the existing switch statement just duplicates the
driver's existing logic for format detection.
Also remove the FIXME comment from the call to drm_fbdev_generic_setup()
as the driver now handles color depth and bpp values correctly.
v2:
* fix commit-message typo
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-5-tzimmermann@suse.de
Cirrus has a preferred color depth of 16 bit; also use it as fbdev
bpp value. Don't use the color depth directly. It has a different
meaning than bpp and both cannot be used interchangeably.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-4-tzimmermann@suse.de
Logicvc can have different values for the preferred color depth. Set
the fbdev bpp value depending on the runtime value.
v2:
* remove unused color depth of 15 from switch (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-3-tzimmermann@suse.de
Set the preferred color depth to 24 bits and the fbdev bpp to 32
bits. This will signal XRGB8888 as default format to clients.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-2-tzimmermann@suse.de
The datasheet specifies a delay of 10 milliseconds, but the current
driver only waits for 1 ms. Fix this to make sure the initialization
sequence meets the spec.
Fixes: ceb515ba29 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122081219.20143-1-frieder@fris.de
Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-19-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):
- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
4.43361875 MHz (the PAL subcarrier frequency). Never used for
broadcasting, but sometimes used as a hack to play NTSC content in PAL
regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
frequency. Another non-standard, non-broadcast mode, used in similar
contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
been broadcast in Eastern Europe and various parts of Africa and Asia.
Uses the same 576i50 timings as PAL.
Also added some comments explaining color subcarrier frequency
registers.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-18-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.
We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property. We're also making use of
the new analog TV atomic_check helper to make sure we trigger a modeset
whenever the TV mode is updated.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-17-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.
Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-16-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-15-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be shared
across drivers too.
Let's create an atomic_check helper for those use cases.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-14-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.
Let's create a helper that will take care of it.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-13-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
