Usage of the telem sysfs file allows for partial reads at an offset.
The current callback method returns the buffer starting from offset 0
only.
Include the requested offset in the callback and update the necessary
address calculations with the offset.
Note: offset addition is moved from the caller to the local usage. For
non-callback usage this is unchanged behavior.
Fixes: e92affc74c ("platform/x86/intel/vsec: Add PMT read callbacks")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20241114130358.2467787-2-michael.j.ruhl@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When file is opened in WRITE only mode, then GET messages are not allowed
and when file is opened in READ only mode, SET messages are not allowed.
In these scenerios, return error EPERM to userspace instead of EINVAL.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241112120450.2407125-2-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Firmware is updated to send HSMP_ERR_PREREQ_NOT_SATISFIED(0xFD) and
HSMP_ERR_SMU_BUSY(0xFC) error codes. Add them here.
Add error logs to make it easy to understand the failure reason for
different error conditions.
Replace pr_err() with dev_err() to identify the driver printing the
error.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241112120450.2407125-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add documentation for the amd_3d_vcache sysfs bus platform driver
interface so that userspace applications can use it to change mode
preferences, either frequency or cache.
Co-developed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20241112170307.3745777-3-Basavaraj.Natikar@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
AMD X3D processors, also known as AMD 3D V-Cache, feature dual Core
Complex Dies (CCDs) and enlarged L3 cache, enabling dynamic mode
switching between Frequency and Cache modes. To optimize performance,
implement the AMD 3D V-Cache Optimizer, which allows selecting either:
Frequency mode: cores within the faster CCD are prioritized before
those in the slower CCD.
Cache mode: cores within the larger L3 CCD are prioritized before
those in the smaller L3 CCD.
Co-developed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20241112170307.3745777-2-Basavaraj.Natikar@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Volume buttons on Lenovo Thinkpad X12 Detachable Tablet Gen 1 did not
send any input events when pressed. When loading intel-hid with the 5
Button Array explicitly enabled, the buttons functioned normally.
Adds the X12 Detachable Tablet Gen 1 to the `button_array_table`.
However, the driver is unable to call INTEL_HID_DSM_BTNE_FN and prints
the warning "failed to set button capability" when attempting to enable
or disable the 5 Button Array. The warning should be harmless and
adding more special handling to avoid it is not worth it.
Co-developed-by: Mary Strodl <mstrodl@csh.rit.edu>
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Signed-off-by: Cole Stowell <cole@stowell.pro>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107205908.69279-1-cole@stowell.pro
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After the file got split, there are now W=1 warnings for users that
include it without referencing hsmp_msg_desc_table:
In file included from arch/x86/include/asm/amd_hsmp.h:6,
from drivers/platform/x86/amd/hsmp/plat.c:12:
arch/x86/include/uapi/asm/amd_hsmp.h:91:35: error: 'hsmp_msg_desc_table' defined but not used [-Werror=unused-const-variable=]
91 | static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
| ^~~~~~~~~~~~~~~~~~~
Mark it as __attribute__((maybe_unused)) to shut up the warning but
keep it in the file in case it is used from userland. The __maybe_unused
shorthand unfortunately isn't available in userspace, so this has to
be the long form.
While it is not envisioned a normal userspace program could benefit
from having this table as part of UAPI, it seems there is non-zero
chance this array is used by some userspace tests so it is retained for
now (see the Link below).
Fixes: e47c018a0e ("platform/x86/amd/hsmp: Move platform device specific code to plat.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/platform-driver-x86/CAPhsuW7mDRswhVjYf+4iinO+sph_rQ1JykEof+apoiSOVwOXXQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20241028163553.2452486-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace throttle_thermal_policy_switch_next() with
platform_profile_cycle() to reduce code duplication and avoid a
potential race condition with the platform profile handler.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107003811.615574-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When changing the thermal policy using the platform profile API,
a Vivobook thermal policy is stored in throttle_thermal_policy_mode.
However everywhere else a normal thermal policy is stored inside this
variable, potentially confusing the platform profile.
Fix this by always storing normal thermal policy values inside
throttle_thermal_policy_mode and only do the conversion when writing
the thermal policy to hardware. This also fixes the order in which
throttle_thermal_policy_switch_next() steps through the thermal modes
on Vivobook machines.
Tested-by: Casey G Bowman <casey.g.bowman@intel.com>
Fixes: bcbfcebda2 ("platform/x86: asus-wmi: add support for vivobook fan profiles")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107003811.615574-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The if statement performs the same action if the strcmp result is
true or false since there is identical code on both branches. The
if statement is redundant and can be replaced with just one call
to sysfs_remove_group.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107113543.17137-1-colin.i.king@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Sumesh K Naduvalath doesn't work for Intel anymore. Adding myself as
maintainer as this is related to Intel Integrated Sensor Hub, which I
maintain.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241111185456.331071-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for the Vexia EDU ATLA 10 tablet, Android 4.2/4.4 + Guadalinex
Ubuntu tablet distributed to schools in the Spanish Andalucía region.
Besides the usual broken DSDT issues this tablet is special because all
its LPSS island peripherals are enumerated as PCI devices rather then as
ACPI devices as they typically are.
At the same time there are disabled (_STA=0) ACPI devices for
the peripherals and child ACPI devices for e.g. attached I2C/SDIO devices
are children of these disabled ACPI devices and thus will not be used
by Linux since the parent is disabled.
So besides the usual manual i2c-client instantiation for accel/touchscreen
this tablet also requires manual i2c-client instantiation for the codec
and for the PMIC.
Also it seems the mainboard was designed for Windows not Android, so
it has an I2C attached embedded controller instead of allowing direct
access to the charger + fuel-gauge chips as is usual with Android boards.
Normally when there is an embedded controller, there also is ACPI battery
support, but since this shipped with Android that is missing and Linux
needs to have a power_supply class driver talking directly to the EC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241104200848.58693-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On the Vexia EDU ATLA 10 tablet, which ships with Android + a custom Linux
(guadalinex) using the custom Android kernel the I2C controllers are not
enumerated as ACPI devices as they typically are.
Instead they are enumerated as PCI devices which do not have ACPI firmware
nodes associated with them, so getting the i2c_adapter by the ACPI path of
its firmware node does not work.
Add support for getting the i2c_adapter by the devname() of its PCI parent
instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241104200848.58693-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add get_i2c_adap_by_handle() helper function, this is a preparation patch
for adding support for getting i2c_adapter-s by PCI parent devname().
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241104200848.58693-2-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit df7f9acd86 ("platform/x86: intel: Add 'intel' prefix to the
modules automatically") renames tpmi.c to vsec_tpmi.c in
drivers/platform/x86/intel/, but misses to adjust the INTEL TPMI DRIVER
section, which is referring to this file.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Adjust the file entry to this file renaming.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241105152813.60823-1-lukas.bulwahn@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use platform_get_resource() to fetch the memory resource instead of
acpi_walk_resources() and devm_ioremap_resource() for mapping the
resources.
PS: We cannot use resource_size() here because it adds an extra byte to
round off the size. In the case of PMF ResourceTemplate(), this rounding
is already handled within the _CRS. Using resource_size() would increase
the resource size by 1, causing a mismatch with the length field and
leading to issues. Therefore, simply use end-start of the ACPI resource to
obtain the actual length.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241104054829.620858-4-Shyam-sundar.S-k@amd.com
[ij: added a cast to resource_size_t printing]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The AMD PMF driver is actively being developed, so the MAINTAINERS record
should reflect "Supported" instead of "Maintained." Update the MAINTAINERS
database to reflect this change.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241104054829.620858-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To simplify error handling in the amd_pmf probe function and reduce code
size, dev_err() is replaced with dev_err_probe().
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20241104054829.620858-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ida_alloc()/ida_free() don't need any mutex, so remove this one.
It was introduced by commit 9a90ea7d37 ("platform/x86/intel/vsec: Use
mutex for ida_alloc() and ida_free()").
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/ccc08a262304f7f8c2e435349f0f714ebf9acfcd.1730563031.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is a spelling mistake in a pr_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20241101110230.3303197-1-colin.i.king@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rework Makefile to add 'intel' prefix to the modules automatically.
This removes a lot of boilerplate code in it and also makes robust
against mistypos in the prefix.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241016105950.785820-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Added documentation for new WMAX interface, present on some Alienware
X-Series, Alienware M-Series and Dell's G-Series laptops.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241030001228.7770-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Added force_platform_profile and force_gmode unsafe module parameters,
allowing users to force `thermal` and `gmode` quirks respectively.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241030001148.7623-2-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implements platform profile support for Dell laptops with new WMAX thermal
interface, present on some Alienware X-Series, Alienware M-Series and
Dell's G-Series laptops. This interface is suspected to be used by
Alienware Command Center (AWCC), which is not available for linux
systems, to manage thermal profiles.
This implementation makes use of three WMI methods, namely
THERMAL_CONTROL, THERMAL_INFORMATION and GAME_SHIFT_STATUS, which take
u32 as input and output arguments. Each method has a set of supported
operations specified in their respective enums.
Not all models with WMAX WMI interface support these methods. Because of
this, models have to manually declare support through new quirks
`thermal` for THERMAL_CONTROL and THERMAL_INFORMATION and `gmode` for
GAME_SHIFT_STATUS.
Wrappers written for these methods support multiple operations.
THERMAL_CONTROL switches thermal modes through operation
ACTIVATE_PROFILE. Available thermal codes are auto-detected at runtime
and matched against a list of known thermal codes:
Thermal Table "User Selectable Thermal Tables" (USTT):
BALANCED 0xA0
BALANCED_PERFORMANCE 0xA1
COOL 0xA2
QUIET 0xA3
PERFORMANCE 0xA4
LOW_POWER 0xA5
Thermal Table Basic:
QUIET 0x96
BALANCED 0x97
BALANCED_PERFORMANCE 0x98
PERFORMANCE 0x99
Devices are known to implement only one of these tables without mixing
their thermal codes.
The fact that the least significant digit of every thermal code is
consecutive of one another is exploited to efficiently match codes
through arrays.
Autodetection of available codes is done through operation LIST_IDS of
method THERMAL_INFORMATION. This operation lists fan IDs, CPU sensor ID,
GPU sensor ID and available thermal profile codes, *in that order*. As
number of fans and thermal codes is very model dependent, almost every
ID is scanned and matched based on conditions found on
is_wmax_thermal_code(). The known upper bound for the number of IDs is
13, corresponding to a device that have 4 fans, 2 sensors and 7 thermal
codes.
Additionally G-Series laptops have a key called G-key, which (with AWCC
proprietary driver) switches the thermal mode to an special mode named
GMODE with code 0xAB and changes Game Shift Status to 1. Game Shift is a
mode the manufacturer claims, increases gaming performance.
GAME_SHIFT_STATUS method is used to mimic this behavior when selecting
PLATFORM_PROFILE_PERFORMANCE option.
All of these profiles are known to only change fan speed profiles,
although there are untested claims that some of them also change power
profiles.
Activating a thermal mode with method THERMAL_CONTROL may cause short
hangs. This is a known problem present on every platform.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241030001124.7589-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
alienware_wmax_command() now takes void * and size_t instead of struct
wmax_basic_args to extend support to new WMAX methods. Also int *out_data
was changed to u32 *out_data, because new interface specifies u32 as output
parameter and all previous callers would pass u32 * regardless.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241030001057.7562-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixed inconsistent indentation and removed unnecessary (acpi_size) and
(u32 *) casts.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241030001028.7402-2-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: chen zhang <chenzhang@kylinos.cn>
Link: https://lore.kernel.org/r/20241028024949.24746-1-chenzhang@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Introduce to_wmi_driver() as a replacement for dev_to_wdrv()
so WMI drivers can use this support macro instead of having
to duplicate its functionality.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241026193803.8802-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace dev_to_wdev() with to_wmi_device() to stop duplicating
functionality.
Also switch to_wmi_device() to use container_of_const() so const
values are handled correctly.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241026193803.8802-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The wmi_block_list is only used by guid_count() and without proper
protection. It also duplicates some of the WMI bus functionality.
Remove the wmi_block_list and use bus_for_each_dev() instead.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241026193803.8802-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Lenovo are adding support for both Admin and System certificates to
the certificate based authentication feature
This commit adds the support for this.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241024195536.6992-4-mpearson-lenovo@squebb.ca
[ij: Added #include <linux/array_size.h> + comment grammar fix]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
SVP = BIOS Supervisor/Admin password
SMP = BIOS System password
If SMP ACL is enabled in the BIOS then the system allows you to set the
SMP without a SVP password configured. Change code to allow this.
BIOS will return permissions error if SVP is required.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241024195536.6992-3-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As both password or certificate authentication are available as mechanisms
update the documentation to add certificate as an option
Update driver to return correct mechanism appropriately.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241024195536.6992-2-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Improve determination of whether authentication account is enabled by
checking if either password or certificate is enabled.
Renamed valid to pwd_enabled for better readability.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241024195536.6992-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: chen zhang <chenzhang@kylinos.cn>
Link: https://lore.kernel.org/r/20241023012905.15551-1-chenzhang@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Instead of making hsmp_pdev global and exporting this symbol from hsmp.c,
make it static and create a wrapper function get_hsmp_pdev() to access
hsmp_pdev from plat.c and acpi.c.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-11-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move out of device_add_group() variants, instead assign static array of
attribute groups to .dev_groups in platform_driver structure.
Then use is_visible to enable only the necessary files on the platform.
.read() and .is_bin_visibile() have slightly different
implemetations on ACPI and non-ACPI system, so move them
to respective files.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-10-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hsmp_send_message() is exported with AMD_HSMP name space.
The other modules who would like to use this symbol,
need to import AMD_HSMP namespace using MODULE_IMPORT_NS()
to get away with warning.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-9-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Separate the probes for HSMP ACPI and platform device drivers.
Provide a Kconfig option to choose between ACPI or the platform device
based driver. The common code which is the core part of the HSMP driver
maintained at hsmp.c is guarded by AMD_HSMP config and is selected by
these two driver configs. This will be built into separate hsmp_common.ko
module and acpi as hsmp_acpi and plat as amd_hsmp respectively.
Also add "|| COMPILE_TEST" clause in Kconfig to get build coverage for
HSMP.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-8-suma.hegde@amd.com
[ij: Fixed doc to use pre-formatted text for the ACPI dump.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
plat_dev is a commonly used variable name, since its made as extern now,
change it to more specific name.
Also change miscdevice hsmp_device to mdev.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-7-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An upcoming change splits HSMP driver into ACPI and platform device
variants. Prepare for the split by moving ACPI related code
to acpi.c from hsmp.c. Common code is kept in hsmp.c.
No logical/functional change.
We still have one driver at this point,
the driver probe will be split in the next patch.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-6-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An upcoming change splits HSMP driver into ACPI and platform device
variants. Prepare for the split by moving platform device part to plat.c.
No functinality/logical changes.
Common code which can be used by ACPI and platform device
remains in hsmp.c.
ACPI code in hsmp.c will be moved to acpi.c in next patch.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-5-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in preparation to splitting ACPI and platform device drivers.
No logical change, move common structures, macros to hsmp.h,
add missed header files, remove unwanted header inclusions,
and re-order the header file in hsmp.c file.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-4-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in preparation to ACPI, Non-ACPI split.
amd_hsmp_rdwr() is used to access HSMP protocol registers.
ACPI and Non-ACPI use different methods to access these registers.
Now that code is split and common functionality is kept in hsmp.c
we need to define a function pointer to handle these functions separately.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-3-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in preparation to splitting ACPI and platform device drivers.
Having init_acpi() helps in smooth code movement.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-2-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is in preparation to splitting ACPI and platform device drivers.
Create and move hsmp specific code into its own directory,
no logical changes.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-1-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some platforms, aggressive C1 auto-demotion may lead to failure to enter
the deepest C-state during suspend-to-idle, causing high power consumption.
To prevent this, disable C1 auto-demotion during suspend and re-enable on
resume.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241017210439.3449324-2-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Several platform resume functions currently call pmc_core_send_ltr_ignore()
and pmc_core_resume_common(), both of which are already called by
cnl_resume(). Simplify the code by having these functions call cnl_resume()
directly.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241017210439.3449324-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add SAM client device nodes for the Surface Pro 9 5G, with the usual
battery/AC and HID nodes for keyboard and touchpad support.
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240908223505.21011-4-jerome.debretagne@gmail.com
[ij: variable names 5G -> 5g, added archs to comments as requested.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Save a copy of the entire struct intel_scu_ipc_data for easier
maintenance in case of expanding (adding new members become simpler).
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241021133705.2933464-6-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
