Utilise get_cur_symbol_rate() in get_frontend() to update the
dtv_frontend_properties with the current symbol rate as reported by the
demodulator.
Reported-by: Richard Scobie <rascobie@slingshot.co.nz>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <rascobie@slingshot.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The result (if any) isn't used anywhere besides being assigned to a local
variable (and the only current companion stv6111 doesn't even implement
get_if_frequency()), thus remove the ptr check and the call, and also
remove the now unused iffreq variable.
Reported-by: Richard Scobie <rascobie@slingshot.co.nz>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <rascobie@slingshot.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When a parent (demod) driver encounters and signals a problem with
gate_ctrl(), don't blindly continue poking the I2C bus.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <rascobie@slingshot.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Stack dump when gate_ctrl() is called in a way that consecutive unlocks
happen. This is a clear indication that other drivers interfacing with
the stv0910 driver don't do things properly or don't check for failures,
so dump stack so that those drivers can be identified and fixed.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <rascobie@slingshot.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Each field (FSTV0910_XX) is declared as reg/off/unused/sign/mask. Add
the missing offset value to the defines.
Picked up from dddvb master, commit 8a1f27c3d22c ("add field offset to
field defines") by Ralph Metzler <rjkm@metzlerbros.de>, adapted to
match the comment style in the mainline driver.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The assignment status to itself is redundant and can be removed.
Detected with Coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Xbox One Digital TV Tuner is a low-cost USB 2.0 multistandard TV tuner. It supports DVB-T, DVB-T2 and DVB-C broadcast standards.
USB bridge: DibCom 0700C
Demodulator: Panasonic MN88472
Tuner: TDA18250BHN
The demodulator requires firmware. Download one from here:
http://palosaari.fi/linux/v4l-dvb/firmware/MN88472/02/latest/
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
NXP TDA18250 silicon tuner driver.
Version 4 includes some checkpatch fixes.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The self assignment of temporary is redundant and can be removed.
Detected using coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The self assignment of k_indirect is redundant and can be removed.
Detected using coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
To adapt fei->sram_size calculation via resource_size for memory size
calculation before, in fei->sram = devm_ioremap_resource(dev, res).
And make memory initialization range in
memset_io for fei->sram appropriate
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
_channel_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference. Fix this by moving the pointer dereference
after _channel_ has been null checked.
This issue was detected with the help of Coccinelle.
Fixes: c5f5d0f997 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The correct error code when a function is not defined is
-ENOTSUPP. It was typoed wrong as -EOPNOTSUPP, with,
unfortunately, exists, but it is not used by the DVB core.
Thanks-to: Geert Uytterhoeven <geert@linux-m68k.org>
Thanks-to: Arnd Bergmann <arnd@arndb.de>
To make me revisit this code.
Fixes: a9cb97c3e6 ("media: dvb_frontend: be sure to init dvb_frontend_handle_ioctl() return code")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add read_ber function that reads from property cache to support DVBv3.
The implementation is inspired by the cx24120 driver.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add read_snr function that reads from property cache to support DVBv3.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for BER statistics.
Configure a measurement period of 30000 packets.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use check_signal register for DVB-T additionally.
For DVB-C use ps_lock additionally.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use constellation from property cache instead of always setting it to
QAM256.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The lock timeout should not depend on the bandwidth.
It should be either constant or depend on xtal frequency.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The TS parallel mode setting should be where all other TS settings are written.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Convert register numbers to macros.
Correctness verified by comparing the disassembly before and after.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix almost all of checkpatch --strict warnings.
The remaining warnings are about:
* macro REG16 (should be enclosed in parentheses)
* macro REG16 (Macro argument reuse)
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Removed module parameter debug and the conditions based on it.
Now it can be configured via dynamic debug.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As smatch warned:
drivers/media/dvb-core/dvb_frontend.c:2468 dvb_frontend_handle_ioctl() error: uninitialized symbol 'err'.
The ioctl handler actually got a regression here: before changeset
d73dcf0cdb ("media: dvb_frontend: cleanup ioctl handling logic"),
the code used to return -EOPNOTSUPP if an ioctl handler was not
implemented on a driver. After the change, it may return a random
value.
Fixes: d73dcf0cdb ("media: dvb_frontend: cleanup ioctl handling logic")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tested-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by smatch, there are several places where the I2C
transfer may fail, leading into inconsistent behavior:
drivers/media/tuners/xc5000.c:689 xc_debug_dump() error: uninitialized symbol 'regval'.
drivers/media/tuners/xc5000.c:841 xc5000_is_firmware_loaded() error: uninitialized symbol 'id'.
drivers/media/tuners/xc5000.c:939 xc5000_set_tv_freq() error: uninitialized symbol 'pll_lock_status'.
drivers/media/tuners/xc5000.c:1195 xc_load_fw_and_init_tuner() error: uninitialized symbol 'pll_lock_status'.
Handle the return codes from the I2C transfer, in order to
address those issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As reported by smatch:
drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c:485 mxl111sf_demod_read_signal_strength() error: uninitialized symbol 'modulation'.
The mxl111sf_demod_read_signal_strength() just ignores if something
gets wrong while reading snr or modulation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by smatch:
drivers/media/dvb-frontends/drxd_hard.c:989 HI_Command() error: uninitialized symbol 'waitCmd'.
drivers/media/dvb-frontends/drxd_hard.c:1306 SC_WaitForReady() error: uninitialized symbol 'curCmd'.
drivers/media/dvb-frontends/drxd_hard.c:1322 SC_SendCommand() error: uninitialized symbol 'errCode'.
drivers/media/dvb-frontends/drxd_hard.c:1339 SC_ProcStartCommand() error: uninitialized symbol 'scExec'.
The error handling on several places are somewhat flawed, as
they don't check if Read16() returns an error.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The loop with read status use a dynamic timeout value, calculated
from symbol rate. It should run the loop at least one time for
the status to be handled after the loop.
While this should, in practice, happen every time, it doesn't
hurt to change the logic to make it explicit.
This solves a smatch warning:
drivers/media/dvb-frontends/cxd2841er.c:3350 cxd2841er_set_frontend_s() error: uninitialized symbol 'status'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by smatch:
drivers/media/pci/cx25821/cx25821-alsa.c:155 cx25821_alsa_dma_init() warn: argument 3 to %08lx specifier is cast from pointer
Use the standard %p to print a pointer.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Smatch gives two bogus warnings on this driver:
drivers/media/usb/dvb-usb-v2/dvbsky.c:336 dvbsky_s960_attach() error: uninitialized symbol 'i2c_adapter'.
drivers/media/usb/dvb-usb-v2/dvbsky.c:459 dvbsky_s960c_attach() error: uninitialized symbol 'i2c_adapter'.
Shut them up.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If the tuner doesn't have get_frequency() callback, the current
code will place a random value as the frequency offset. That
doesn't seem right! The better is to just assume that, on such
case, the tuner was able to set the exact frequency that was
requested.
Fixes a smatch warning:
drivers/media/dvb-frontends/m88rs2000.c:639 m88rs2000_set_frontend() error: uninitialized symbol 'tuner_freq'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pt1_nr_tables is a modprobe parameter. The way the logic
handles it, it can't be negative. However, user can
set it to zero.
If set to zero, however, it will cause troubles at
pt1_init_tables(), as reported by smatch:
drivers/media/pci/pt1/pt1.c:468 pt1_init_tables() error: uninitialized symbol 'first_pfn'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The smatch logic gets confused with the syntax used to check if the
ov9650x_read() reads succedded:
drivers/media/i2c/ov9650.c:895 __g_volatile_ctrl() error: uninitialized symbol 'reg2'.
drivers/media/i2c/ov9650.c:895 __g_volatile_ctrl() error: uninitialized symbol 'reg1'.
There's nothing wrong with the original logic, except that
it is a little more harder to review.
So, let's stick with the syntax that won't cause read
issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by smatch:
drivers/media/dvb-frontends/mb86a16.c:1690 mb86a16_read_ber() error: uninitialized symbol 'timer'.
drivers/media/dvb-frontends/mb86a16.c:1706 mb86a16_read_ber() error: uninitialized symbol 'timer'.
There is a potential risk of doing a division by zero if
timer is not handled well. Enforce it by setting a bit mask
for the values used to select the timer.
It should be noticed that I don't have mb86a16 datasheet. So,
the bitmask was guessed based on the existing checks for
the field. At worse case scenario, it will just show a
badly calculated bit error rate, but it won't crash.
While here, optimize the logic to prevent uneeded tests.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If the I2C read fails while check for sync, there's no point
on doing adjusting the tuner due to a random value that might
be at VIRM var. So, set VIRM to zero, as that makes the caller
for check_sync() to return an error.
Fix those smatch warnings:
drivers/media/dvb-frontends/mb86a16.c:1460 mb86a16_set_fe() error: uninitialized symbol 'VIRM'.
drivers/media/dvb-frontends/mb86a16.c:1461 mb86a16_set_fe() error: uninitialized symbol 'VIRM'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
as reported by smatch:
drivers/media/dvb-frontends/drx39xyj/drxj.c:2157 drxj_dap_atomic_read_write_block() error: uninitialized symbol 'word'.
The driver doesn't check if a read error occurred. Add such
check.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As smatch reported:
drivers/media/i2c/imx274.c:659 imx274_regmap_util_write_table_8() error: uninitialized symbol 'err'.
There is a bug at imx274_regmap_util_write_table_8() with causes
it to randomly return a random error if range_count is zero.
Worse than that, the logic there starts with range_count
equal to zero, and periodically resets it to zero again.
As it is a way more likely that err assumes a non-zero value,
I suspect that the chance of this code to run is very small,
so, it would be worth to review the entire function.
Anyway, clearly it shouldn't be returning error if range_count
is zero. So, let's fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The current code doesn't report tuner lock properly if the
tuner get_status callback is not available, as reported by
smatch:
drivers/media/dvb-frontends/stv090x.c:2220 stv090x_get_coldlock() error: uninitialized symbol 'reg'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If, for some reason, reading the hwmodel register on
xc4000 fails, it will cause the following logig to
use a random value, as reported by smatch:
drivers/media/tuners/xc4000.c:1047 check_firmware() error: uninitialized symbol 'hwmodel'.
drivers/media/tuners/xc4000.c:1060 check_firmware() error: uninitialized symbol 'hwmodel'.
drivers/media/tuners/xc4000.c:1064 check_firmware() error: uninitialized symbol 'hwmodel'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The logic at si476x_radio_s_hw_freq_seek() checks if the
frequency range that will be used to handle hardware seek
has the minimal frequency under rangelow. That works fine
if userspace zeros both fields. However, if userspace
fills either seek->rangelow or seek-rangehigh, it won't
read the corresponding range from the device, causing the
values to be unitialized, as warned by smatch:
drivers/media/radio/radio-si476x.c:789 si476x_radio_s_hw_freq_seek() error: uninitialized symbol 'rangelow'.
drivers/media/radio/radio-si476x.c:789 si476x_radio_s_hw_freq_seek() error: uninitialized symbol 'rangehigh'.
Fix it by initializing those vars from the values present at
the struct v4l2_hw_freq_seek.
While here, simplify the logic which reads such values from
the hardware limits.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The logic at qt1010_init_meas1() and qt1010_init_meas2()
are too complex for static analizers to identify that
some vars are always be initialized.
That causes smatch to produce the following warnings:
drivers/media/tuners/qt1010.c:248 qt1010_init_meas1() error: uninitialized symbol 'val2'.
drivers/media/tuners/qt1010.c:282 qt1010_init_meas2() error: uninitialized symbol 'val'.
So, add annotations to prevent those bogus warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The tuning logic at tda8290 relies on agc_stat and
adc_sat to be initialized. However, as warned by smatch:
drivers/media/tuners/tda8290.c:261 tda8290_set_params() error: uninitialized symbol 'agc_stat'.
drivers/media/tuners/tda8290.c:261 tda8290_set_params() error: uninitialized symbol 'adc_sat'.
drivers/media/tuners/tda8290.c:262 tda8290_set_params() error: uninitialized symbol 'adc_sat'.
That could cause an erratic behavior if PLL is not locked,
as the code will only work if
!(pll_stat & 0x80) && (adc_sat < 20)
So, initialize it to zero, in order to let the code below
to be called, with should give more chances to adjust the
tuner gain, in order to get a PLL lock.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by smatch:
drivers/media/platform/atmel/atmel-isc.c:2097 isc_parse_dt() error: uninitialized symbol 'ret'.
The problem here is that of_graph_get_next_endpoint() can
potentially return NULL on its first pass, with would make
it return a random value, as ret is not initialized.
While here, use while(1) instead of for(; ;), as while is
the preferred syntax for such kind of loops.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
