Commit Graph

566 Commits

Author SHA1 Message Date
Allan Stephens
c74a46110f tipc: Remove duplicate check of message destination node
Eliminates a check in the processing of TIPC messages arriving from
off node that ensures the message is destined for this node, since this
check duplicates an earlier check. (The check would be necessary if TIPC
needed to be able to route incoming messages to another node, but the
elimination of multi-cluster support means that this never happens and
all incoming messages are consumed by the receiving node.)

Note: This change involves the elimination of a single "if" statement
with a large "then" clause; consequently, a significant number of lines
end up getting re-indented. In addition, a simple message header access
routine that is no longer referenced is eliminated. However, the only
functional change is the elimination of the single check described above.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24 17:05:14 -05:00
Allan Stephens
97878a405c tipc: Detect duplicate nodes using different network interfaces
Utilizes the new "node signature" field in neighbor discovery messages
to ensure that all links TIPC associates with a given <Z.C.N> network
address belong to the same neighboring node. (Previously, TIPC could not
tell if link setup requests arriving on different interfaces were from
the same node or from two different nodes that has mistakenly been assigned
the same network address.)

The revised algorithm for detecting a duplicate node considers both the
node signature and the network interface adddress specified in a request
message when deciding how to respond to a link setup request. This prevents
false alarms that might otherwise arise during normal network operation
under the following scenarios:

a) A neighboring node reboots. (The node's signature changes, but the
network interface address remains unchanged.)

b) A neighboring node's network interface is replaced. (The node's signature
remains unchanged, but the network interface address changes.)

c) A neighboring node is completely replaced. (The node's signature and
network interface address both change.)

The algorithm also handles cases in which a node reboots and re-establishes
its links to TIPC (or begins re-establishing those links) before TIPC
detects that it is using a new node signature. In such cases of "delayed
rediscovery" TIPC simply accepts the new signature without disrupting
communication that is already underway over the links.

Thanks to Laser [gotolaser@gmail.com] for his contributions to the
development of this enhancement.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24 17:05:13 -05:00
Allan Stephens
fc0eea691a tipc: Introduce node signature field in neighbor discovery message
Adds support for the new "node signature" in neighbor discovery messages,
which is a 16 bit identifier chosen randomly when TIPC is initialized.
This field makes it possible for nodes receiving a neighbor discovery
message to detect if multiple neighboring nodes are using the same network
address (i.e. <Z.C.N>), even when the messages are arriving on different
interfaces.

This first phase of node signature support creates the signature,
incorporates it into outgoing neighbor discovery messages, and tracks
the signature used by valid neighbors. An upcoming patch builds on this
foundation to implement the improved duplicate neighbor detection checking.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24 17:05:13 -05:00
Allan Stephens
dff10e9e63 tipc: Minor optimization to rejection of connection-based messages
Modifies message rejection logic so that TIPC doesn't attempt to
send a FIN message to the rejecting port if it is known in advance
that there is no such message because the rejecting port doesn't exist.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:19 -05:00
Allan Stephens
3175bd9add tipc: Eliminate alteration of publication key during name table purging
Removes code that alters the publication key of a name table entry
that is being forcibly purged from TIPC's name table after contact
with the publishing node has been lost.

Current TIPC ensures that all defunct names are purged before
re-establishing contact with a failed node.  There used to be a risk
that the publication might be accidentally deleted because it might be
re-added to the name table before the purge operation was completed.
But now there is no longer a need to ensure that the new key is different
than the old one.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:19 -05:00
Allan Stephens
63e7f1ac28 tipc: Prevent loss of fragmented messages over broadcast link
Modifies broadcast link so that an incoming fragmented message is not
lost if reassembly cannot begin because there currently is no buffer
big enough to hold the entire reassembled message. The broadcast link
now ignores the first fragment completely, which causes the sending node
to retransmit the first fragment so that reassembly can be re-attempted.

Previously, the sender would have had no reason to retransmit the 1st
fragment, so we would never have a chance to re-try the allocation.

To do this cleanly without duplicaton, a new bclink_accept_pkt()
function is introduced.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:19 -05:00
Allan Stephens
b76b27cad5 tipc: Prevent loss of fragmented messages over unicast links
Modifies unicast link endpoint logic so an incoming fragmented message
is not lost if reassembly cannot begin because there is no buffer big
enough to hold the entire reassembled message. The link endpoint now
ignores the first fragment completely, which causes the sending node to
retransmit the first fragment so that reassembly can be re-attempted.

Previously, the sender would have had no reason to retransmit the 1st
fragment, so we would never have a chance to re-try the allocation.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
2012-02-06 16:59:19 -05:00
Allan Stephens
1ec2bb0840 tipc: Remove obsolete broadcast tag capability
Eliminates support for the broadcast tag field, which is no longer
used by broadcast link NACK messages.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:18 -05:00
Allan Stephens
7a54d4a99d tipc: Major redesign of broadcast link ACK/NACK algorithms
Completely redesigns broadcast link ACK and NACK mechanisms to prevent
spurious retransmit requests in dual LAN networks, and to prevent the
broadcast link from stalling due to the failure of a receiving node to
acknowledge receiving a broadcast message or request its retransmission.

Note: These changes only impact the timing of when ACK and NACK messages
are sent, and not the basic broadcast link protocol itself, so inter-
operability with nodes using the "classic" algorithms is maintained.

The revised algorithms are as follows:

1) An explicit ACK message is still sent after receiving 16 in-sequence
messages, and implicit ACK information continues to be carried in other
unicast link message headers (including link state messages).  However,
the timing of explicit ACKs is now based on the receiving node's absolute
network address rather than its relative network address to ensure that
the failure of another node does not delay the ACK beyond its 16 message
target.

2) A NACK message is now typically sent only when a message gap persists
for two consecutive incoming link state messages; this ensures that a
suspected gap is not confirmed until both LANs in a dual LAN network have
had an opportunity to deliver the message, thereby preventing spurious NACKs.
A NACK message can also be generated by the arrival of a single link state
message, if the deferred queue is so big that the current message gap
cannot be the result of "normal" mis-ordering due to the use of dual LANs
(or one LAN using a bonded interface). Since link state messages typically
arrive at different nodes at different times the problem of multiple nodes
issuing identical NACKs simultaneously is inherently avoided.

3) Nodes continue to "peek" at NACK messages sent by other nodes. If
another node requests retransmission of a message gap suspected (but not
yet confirmed) by the peeking node, the peeking node forgets about the
gap and does not generate a duplicate retransmit request. (If the peeking
node subsequently fails to receive the lost message, later link state
messages will cause it to rediscover and confirm the gap and send another
NACK.)

4) Message gap "equality" is now determined by the start of the gap only.
This is sufficient to deal with the most common cases of message loss,
and eliminates the need for complex end of gap computations.

5) A peeking node no longer tries to determine whether it should send a
complementary NACK, since the most common cases of message loss don't
require it to be sent. Consequently, the node no longer examines the
"broadcast tag" field of a NACK message when peeking.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:18 -05:00
Allan Stephens
b98158e3b3 tipc: Add missing locks in broadcast link statistics accumulation
Ensures that all attempts to update broadcast link statistics are done
only while holding the lock that protects the link's main data structures,
to prevent interference by simultaneous updates caused by messages
arriving on other interfaces.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:18 -05:00
Allan Stephens
0232c5a566 tipc: Fix bug in broadcast link duplicate message statistics
Modifies broadcast link so that it increments the "received duplicate
message" count if an incoming message cannot be added to the deferred
message queue because it is already present in the queue. (The aligns
broadcast link behavior with that of TIPC's unicast links.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:17 -05:00
Allan Stephens
8a275a6a30 tipc: Fix node lock reclamation issues in broadcast link reception
Fixes a pair of problems in broadcast link message reception code
relating to the reclamation of the node lock after consuming an
in-sequence message.

1) Now retests to see if the sending node is still up after reclaiming
   the node lock, and bails out if it is non-operational.

2) Now manipulates the node's deferred message queue only after
   reclaiming the node lock, rather than using queue head pointer
   information that was cached previously.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:17 -05:00
Allan Stephens
57732560d1 tipc: Add missing broadcast link lock when sending NACK
Ensures that any attempt to send a NACK message over TIPC's broadcast
link has exclusive access to the link's main data structures, to prevent
interference with a simultaneous attempt to send other broadcast link
traffic (such as application-generated multicast messages).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:17 -05:00
Allan Stephens
47361c87c5 tipc: Fix problem with broadcast link synchronization between nodes
Corrects a problem in which a link endpoint that activates as the
result of receiving a RESET/STATE sequence of link protocol messages
fails to properly record the broadcast link status information about
the node to which it is now communicating with. (The problem does
not occur with the more common RESET/ACTIVATE sequence of messages.)
The fix ensures that the broadcast link status info is updated after
the RESET message resets the link endpoint, rather than before, thereby
preventing new information from being overwritten by the reset operation.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:16 -05:00
Allan Stephens
9349931371 tipc: Ensure broadcast link re-acquires node after link failure
Fix a bug that can prevent TIPC from sending broadcast messages to a node
if contact with the node is lost and then regained. The problem occurs if
the broadcast link first clears the flag indicating the node is part of the
link's distribution set (when it loses contact with the node), and later
fails to restore the flag (when contact is regained); restoration fails
if contact with the node is regained by implicit unicast link activation
triggered by the arrival of a data message, rather than explicitly by the
arrival of a link activation message.

The broadcast link now uses separate fields to track whether a node is
theoretically capable of receiving broadcast messages versus whether it is
actually part of the link's distribution set. The former member is updated
by the receipt of link protocol messages, which can occur at any time; the
latter member is updated only when contact with the node is gained or lost.
This change also permits the simplification of several conditional
expressions since the broadcast link's "supported" field can now only be
set if there are working links to the associated node.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:16 -05:00
Allan Stephens
4d75313ce9 tipc: Prevent broadcast link stalling in dual LAN environments
Ensure that sequence number information about incoming broadcast link
messages is initialized only by the activation of the first link to a
given cluster node.  Previously, a race condition allowed reset and/or
activation messages for a second link to re-initialize this sequence
number information with obsolete values. This could trigger TIPC to
request the retransmission of previously acknowledged broadcast link
messages from that node, resulting in broadcast link processing becoming
stalled if the node had already released one or more of those messages
and was unable to perform the required retransmission.

Thanks to Laser <gotolaser@gmail.com> for identifying this problem
and assisting in the development of this fix.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:16 -05:00
Allan Stephens
92d2c905b4 tipc: Prevent transmission of outdated link protocol messages
Ensures that a link endpoint discards any previously deferred link
protocol message whenever it attempts to send a new one.

Previously, it was possible for a link protocol message that was unsent
due to congestion to be transmitted after newer protocol messages had
been sent. The stale link protocol message might then cause the receiving
link endpoint to malfunction because of its outdated conent.

Thanks to Osamu Kaminuma [okaminum@avaya.com] for diagnosing the problem
and contributing a prototype patch.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:15 -05:00
Allan Stephens
8809b255a9 tipc: improve the link deferred queue insertion algorithm
Re-code the algorithm for inserting an out-of-sequence message into
a unicast or broadcast link's deferred message queue.  It remains
functionally equivalent but should be easier to understand/maintain.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06 16:59:15 -05:00
Paul Gortmaker
f19765f4f7 tipc: rename struct bearer_name to struct tipc_bearer_names
The addition of the "s" to indicate pluralization is intentional,
since the struct actually contains two name variants.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 21:53:30 -05:00
Paul Gortmaker
a18c4bc3ea tipc: rename struct link* to struct tipc_link*
This converts the following:

	struct link		->	struct tipc_link
	struct link_req		->	struct tipc_link_req
	struct link_name	->	struct tipc_link_name

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 21:53:30 -05:00
Paul Gortmaker
7f9ab6ac2e tipc: rename struct bcbearer* to tipc_bcbearer*
This changes both the struct bcbearer and struct bcbearer_pair to
have the "tipc_" prefix.  Runtime behaviour is unchanged.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 21:53:30 -05:00
Paul Gortmaker
6765fd6771 tipc: rename struct bclink to struct tipc_bclink
Make this rename so that it is consistent with the majority
of the other tipc structs and to assist in removing any
ambiguity with other similar names in other subsystems.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 21:53:30 -05:00
Paul Gortmaker
11f9990604 tipc: rename struct subscriber to struct tipc_subscriber
Make this rename so that it is consistent with the majority
of the other tipc structs and to assist in removing any
ambiguity with other similar names in other subsystems.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 21:53:30 -05:00
Paul Gortmaker
fead39098b tipc: rename struct subscription to struct tipc_subscription
Make this rename so that it is consistent with the majority
of the other tipc structs and to assist in removing any
ambiguity with other similar names in other subsystems.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 21:53:29 -05:00
Paul Gortmaker
4584310b4a tipc: rename struct port_list to struct tipc_port_list
Make this rename so that it is consistent with the majority
of the other tipc structs and to assist in removing any
ambiguity with other similar names in other subsystems.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 21:53:29 -05:00
Paul Gortmaker
358a0d1c9e tipc: rename struct media to struct tipc_media
Give it a meaningful prefix, as suggested by DaveM, so that it
is consistent with things like struct tipc_bearer, and so it isn't
confused with anything else.  This has no impact on the actual
runtime code behaviour.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 21:53:29 -05:00
Allan Stephens
f905730c7e tipc: Allow use of buf_seqno() helper routine by unicast links
Migrates the buf_seqno() helper routine from broadcast link level to
unicast link level so that it can be used both types of TIPC links.
This is a cosmetic change only, and does not affect the operation of TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:54 -05:00
Allan Stephens
3655959143 tipc: Ignore broadcast acknowledgements that are out-of-range
Adds checks to TIPC's broadcast link so that it ignores any
acknowledgement message containing a sequence number that does not
correspond to an unacknowledged message currently in the broadcast
link's transmit queue.

This change prevents the broadcast link from becoming stalled if a
newly booted node receives stale broadcast link acknowledgement
information from another node that has not yet fully synchronized
its end of the broadcast link to reflect the current state of the
new node's end.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:53 -05:00
Allan Stephens
10745cd599 tipc: Flush unsent broadcast messages when contact with last node is lost
Adds code to release any unsent broadcast messages in the broadcast link
transmit queue if TIPC loses contact with its only neighboring node.
Previously, a broadcast link that was in the congested state would hold
on to the unsent messages, even though the messages were now undeliverable.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:52 -05:00
Allan Stephens
9157bafb44 tipc: Minor optimization of broadcast link transmit queue statistic
The two broadcast link statistics fields that are used to derive the
average length of that link's transmit queue are now updated only after
a successful attempt to send a broadcast message, since there is no need
to update these values when an unsuccessful send attempt leaves the
queue unchanged.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:51 -05:00
Allan Stephens
2b78f9a002 tipc: Handle broadcast attempt when no neighboring nodes exist
Adds a check to detect when an attempt is made to send a message
via the broadcast link and no neighboring nodes are currently available
to receive it. Rather than wasting effort passing the message to the
broadcast link and broadcast bearer, who will only throw it away,
TIPC now frees the message immediately and reports success (i.e. the
message has been delivered to all available destinations).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:50 -05:00
Allan Stephens
cd3decdfd1 tipc: Ensure broadcast link spinlock is held when updating node map
Fixes oversight that allowed broadcast link node map to be updated without
first taking the broadcast link spinlock that protects the map. As part
of this fix the node map has been incorporated into the broadcast link
structure to make the need for such protection more evident.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:48 -05:00
Allan Stephens
c47e9b9188 tipc: Eliminate dynamic allocation of broadcast link data structures
Creates global variables to hold the broadcast link's pseudo-bearer and
pseudo-link structures, rather than allocating them dynamically. There
is only a single instance of each structure, and changing over to static
allocation allows elimination of code to handle the cases where dynamic
allocation was unsuccessful.

The memset in the teardown code may look like they aren't used, but
the same teardown code is run when there is a non-fatal error at
init-time, so that stale data isn't present when the user fixes the
cause of the soft error.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:47 -05:00
Allan Stephens
945af1c39d tipc: Eliminate useless check when network address is assigned
Gets rid of an unnecessary check in the routine that updates the port id
of a node's name publications when the node is assigned a network address,
since the routine is only invoked if the new address is different from
the existing one.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:46 -05:00
Allan Stephens
97f1b625d1 tipc: Minor correction to TIPC module unloading
Modifies TIPC's module unloading logic to switch itself into "single
node" mode before starting to terminate networking support. This helps
to ensure that no operations that require TIPC to be in "networking"
mode can initiate once unloading starts.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:45 -05:00
Allan Stephens
d47ce2ece3 tipc: Eliminate useless memset operations in Ethernet media support
Gets rid of two pointless operations that zero out the array used to
record information about TIPC's Ethernet bearers. There is no need to
initialize the array on start up since it is a global variable that is
already zero'd out, and there is no need to zero it out on exit because
the array is never referenced again.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:44 -05:00
Allan Stephens
64b32f7e38 tipc: Do timely cleanup of disabled Ethernet bearer resources
Modifies Ethernet bearer disable logic to break the association between
the bearer and its device driver at the time the bearer is disabled,
rather than when the TIPC module is unloaded. This allows the array
entry used by the disabled bearer to be re-used if the same bearer (or
a different one) is subsequently enabled.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:42 -05:00
Allan Stephens
8c12118db7 tipc: Minor optimization to deactivation of Ethernet media suppot
Change TIPC's shutdown code to deactivate generic networking support
before terminating Ethernet media support. The deactivation of generic
networking support causes all existing bearers to be destroyed, meaning
the Ethernet media termination routine no longer has to bother marking
them as unavailable.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:41 -05:00
Allan Stephens
bfec73d7e4 tipc: Revise comment justifying release of configuration spinlock
Comment-only change to better explain why TIPC's configuration lock is
temporarily released while activating support for network interfaces,
and why the existing activation code doesn't require rework.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:40 -05:00
Allan Stephens
5c216e1d28 tipc: Allow run-time alteration of default link settings
Permits run-time alteration of default link settings on a per-media
and per-bearer basis, in addition to the existing per-link basis.
The following syntax can now be used:

    tipc-config -lt=<link-name|bearer-name|media-name>/<tolerance>
    tipc-config -lp=<link-name|bearer-name|media-name>/<priority>
    tipc-config -lw=<link-name|bearer-name|media-name>/<window>

Note that changes to the default settings for a given media type has
no effect on the default settings used by existing bearers. Similarly,
changes to default bearer settings has no effect on existing link
endpoints that utilize that interface.

Thanks to Florian Westphal <fw@strlen.de> for his contributions to
the development of this enhancement.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:39 -05:00
Allan Stephens
d6d4577ae4 tipc: Ignore neighbor discovery messages containing invalid address
Adds a check to ensure that TIPC ignores an incoming neighbor discovery
message that specifies an invalid media address as its source. The check
ensures that the source address is a valid, non-broadcast address that
could legally be used by a neighboring link endpoint.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:38 -05:00
Allan Stephens
3d749a6a26 tipc: Hide media-specific addressing details from generic bearer code
Reworks TIPC's media address data structure and associated processing
routines to transfer all media-specific details of address conversion
to the associated TIPC media adaptation code. TIPC's generic bearer code
now only needs to know which media type an address is associated with
and whether or not it is a broadcast address, and totally ignores the
"value" field that contains the actual media-specific addressing info.

These changes eliminate the need for a number of endianness conversion
operations and will make it easier for TIPC to support new media types
in the future.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:36 -05:00
Allan Stephens
4d163a326f tipc: Add new address conversion routines for Ethernet media
Enhances TIPC's Ethernet media support to provide 3 new address conversion
routines, which allow TIPC to interpret an address that is in string form
and to convert an address to and from the 20 byte format used in TIPC's
neighbor discovery messages.

These routines are pre-requisites to a follow on commit that hides all
media-specific addressing details from TIPC's generic bearer code.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:27 -05:00
Allan Stephens
c61b666e26 tipc: Improve handling of media address printing errors
Enhances conversion of a media address to printable form so that an
unconvertable address will be displayed as a string of hex digits,
rather than not being displayed at all. (Also removes a pointless check
for the existence of the media-specific address conversion routine,
since the routine is not optional.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:13:06 -05:00
Allan Stephens
6c34921010 tipc: Streamline media registration error checking
Simplifies error handling performed during media registration, since
TIPC no longer supports the dynamic addition of new media types that
are potentially error-prone. These simplifications include the following:

1) No longer check for premature registration of a new media type.
2) No longer check for negative link priority values (which was pointless
   since such values are unsigned, and could cause a compiler warning).
3) No longer generate a warning describing the exact cause of any
   registration failure (just warns that overall registration failed).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:13:06 -05:00
Allan Stephens
a31abe8dae tipc: Eliminate duplication of media structures
Changes TIPC's list of registered media types from an array of media
structures to an array of pointers to media structures. This eliminates
the need to copy of the contents of the structure passed in during media
registration.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:13:06 -05:00
Allan Stephens
c79be4549a tipc: Optimize detection of duplicate media registration
Streamlines the detection of an attempt to register a TIPC media structure
using an already registered name or type identifier. The revised logic now
reuses an existing routine to detect an existing name and no longer
unnecessarily manipulates the media type counter during an unsuccessful
registration attempt.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:13:06 -05:00
Allan Stephens
706767da1b tipc: Register new media using pre-compiled structure
Speeds up the registration of TIPC media types by passing in a structure
containing the required information, rather than by passing in the various
fields describing the media type individually.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:13:05 -05:00
Allan Stephens
2060a57744 tipc: Enable use by containers having their own network namespace
Permits a Linux container to use TIPC sockets even when it has its own
network namespace defined by removing the check that prohibits such use.
This makes it possible for users who wish to isolate their container
network traffic from normal network traffic to utilize TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:13:05 -05:00
Eric Dumazet
966567b764 net: two vzalloc() cleanups
We can use vzalloc() helper now instead of __vmalloc() trick

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19 16:01:38 -05:00
Paul Gortmaker
bc3b2d7fb9 net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules
These files are non modular, but need to export symbols using
the macros now living in export.h -- call out the include so
that things won't break when we remove the implicit presence
of module.h from everywhere.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:30 -04:00
Paul Gortmaker
3a9a231d97 net: Fix files explicitly needing to include module.h
With calls to modular infrastructure, these files really
needs the full module.h header.  Call it out so some of the
cleanups of implicit and unrequired includes elsewhere can be
cleaned up.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:28 -04:00
Ying Xue
94362c7e49 tipc: Remove unused link event tracking code
Elimintes prototype link event tracking functionality that has never
been fleshed out and doesn't do anything useful at the current time.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:15 -04:00
Ying Xue
7e2447763c tipc: Remove callback field from subscription structure
Eliminate the "event_cb" member from TIPC's "subscription" structure
since the function pointer it holds always points to subscr_send_event().

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:14 -04:00
Ying Xue
245f3d342d tipc: Simplify prohibition of listen and accept for connectionless sockets
Modifies the proto_ops structure used by TIPC DGRAM and RDM sockets
so that calls to listen() and accept() are handled by existing kernel
"unsupported operation" routines, and eliminates the related checks
in the listen and accept routines used by SEQPACKET and STREAM sockets
that are no longer needed.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:12 -04:00
Ying Xue
1d835874af tipc: Add support for SO_SNDTIMEO socket option
Adds support for the SO_SNDTIMEO socket option. (This complements the
existing support for SO_RCVTIMEO that is already present.)

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:11 -04:00
Allan Stephens
9aa88c2a50 tipc: Enhance sending of bulk name table messages
Modifies the initial transfer of name table entries to a new neighboring
node so that the messages are enqueued as a unit, rather than individually.

The revised algorithm now locates the link carrying the message only once,
and eliminates unnecessary checks for link congestion, message fragmentation,
and message bundling that are not required when sending these messages.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:10 -04:00
Paul Gortmaker
1c553bb52e tipc: relocate/coalesce node cast in tipc_named_node_up
Functions like this are called using unsigned longs from
function pointers.  In this case, the function is passed in
a node which is normally internally treated as a u32 by TIPC.

Rather than add more casts into this function in the future
for each added use of node within, move the cast to a single
place on a local.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:09 -04:00
Allan Stephens
149ce37c8d tipc: Prevent fragmented messages during initial name table exchange
Reduces the maximum size of messages sent during the initial exchange
of name table information between two nodes to be no larger than the
MTU of the first link established between the nodes. This ensures that
messages will never need to be fragmented, which would add unnecessary
overhead to the name table synchronization mechanism.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:08 -04:00
Allan Stephens
909234cdd2 tipc: Lower limits for number of bearers and media types
Reduces the number of bearers a node can support to 2, which can use
identical or non-identical media. This change won't impact users,
since they are currently limited to a maximum of 2 Ethernet bearers,
and will save memory by eliminating a number of unused entries in
TIPC's media and bearer arrays.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:07 -04:00
Allan Stephens
18abf0fb6b tipc: Remove redundant search when enabling bearer
Removes obsolete code that searches for an Ethernet bearer structure entry
to use for a newly enabled bearer, since this search is now performed
at the start of the enabling algorithm.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:06 -04:00
Allan Stephens
bcd326e844 tipc: Fix unsafe device list search when enabling bearer
Ensures that the device list lock is held while trying to locate
the Ethernet device used by a newly enabled bearer, so that the
addition or removal of a device does not cause problems.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:05 -04:00
Allan Stephens
b4b5610223 tipc: Ensure both nodes recognize loss of contact between them
Enhances TIPC to ensure that a node that loses contact with a
neighboring node does not allow contact to be re-established until
it sees that its peer has also recognized the loss of contact.

Previously, nodes that were connected by two or more links could
encounter a situation in which node A would lose contact with node B
on all of its links, purge its name table of names published by B,
and then fail to repopulate those names once contact with B was restored.
This would happen because B was able to re-establish one or more links
so quickly that it never reached a point where it had no links to A --
meaning that B never saw a loss of contact with A, and consequently
didn't re-publish its names to A.

This problem is now prevented by enhancing the cleanup done by TIPC
following a loss of contact with a neighboring node to ensure that
node A ignores all messages sent by B until it receives a LINK_PROTOCOL
message that indicates B has lost contact with A, thereby preventing
the (re)establishment of links between the nodes. The loss of contact
is recognized when a RESET or ACTIVATE message is received that has
a "redundant link exists" field of 0, indicating that B's sending link
endpoint is in a reset state and that B has no other working links.

Additionally, TIPC now suppresses the sending of (most) link protocol
messages to a neighboring node while it is cleaning up after an earlier
loss of contact with that node. This stops the peer node from prematurely
activating its link endpoint, which would prevent TIPC from later
activating its own end. TIPC still allows outgoing RESET messages to
occur during cleanup, to avoid problems if its own node recognizes
the loss of contact first and tries to notify the peer of the situation.

Finally, TIPC now recognizes an impending loss of contact with a peer node
as soon as it receives a RESET message on a working link that is the
peer's only link to the node, and ensures that the link protocol
suppression mentioned above goes into effect right away -- that is,
even before its own link endpoints have failed. This is necessary to
ensure correct operation when there are redundant links between the nodes,
since otherwise TIPC would send an ACTIVATE message upon receiving a RESET
on its first link and only begin suppressing when a RESET on its second
link was received, instead of initiating suppression with the first RESET
message as it needs to.

Note: The reworked cleanup code also eliminates a check that prevented
a link endpoint's discovery object from responding to incoming messages
while stale name table entries are being purged. This check is now
unnecessary and would have slowed down re-establishment of communication
between the nodes in some situations.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-17 22:55:03 -04:00
Allan Stephens
4b3743ef2c tipc: Ensure congested links receive bearer status updates
Modifies code that disables a bearer to ensure that all of its links
are deleted, not just its uncongested links. Similarly, modifies code
that blocks a bearer to ensure that all of its links are reset, not
just its uncongested links.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
a0f40f02ef tipc: Prevent rounding issues when saving connect timeout option
Saves a socket's TIPC_CONN_TIMEOUT socket option value in its original
form (milliseconds), rather than jiffies. This ensures that the exact
value set using setsockopt() is always returned by getsockopt(), without
being subject to rounding issues introduced by a ms->jiffies->ms
conversion sequence.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
ff60af8c16 tipc: Eliminate redundant check when sending messages
Eliminates code in tipc_send_buf_fast() that handles messages
sent to a destination on the current node, since the only caller
of the routine only passes in messages destined for other nodes.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
0f38513d22 tipc: Remove obsolete congestion handling when sending a broadcast NACK
Eliminates obsolete code that handles broadcast bearer congestion when
the broadast link sends a NACK message, since the broadcast pseudo-bearer
never becomes blocked.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
9f6bdcd428 tipc: Discard incoming broadcast messages that are unexpected
Modifies TIPC's incoming broadcast packet handler to discard messages
that cannot legally be sent over the broadcast link, including:

- broadcast protocol messages that do no contain state information
- payload messages that are not named multicast messages
- any other form of message except for bundled messages, fragmented
  messages, and name distribution messages.

These checks are needed to prevent TIPC from handing an unexpected
message to a routine that isn't prepared to handle it, which could
lead to incorrect processing (up to and including invalid memory
references caused by attempts to access message fields that aren't
present in the message).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:37 -04:00
Allan Stephens
693d03ae3c tipc: Remove deferred queue head caching during broadcast message reception
Modifies TIPC's incoming broadcast packet handler so that it no longer
pre-reads information about the deferred packet queue, since the cached
value is unreliable once the associated node lock has been released.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
5d3c488dfe tipc: Fix node lock problems during broadcast message reception
Modifies TIPC's incoming broadcast packet handler to ensure that the
node lock associated with the sender of the packet is held whenever
node-related data structure fields are accessed. The routine is also
restructured with a single exit point, making it easier to ensure
the node lock is properly released and the incoming packet is properly
disposed of.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
169073db44 tipc: Prevent broadcast link stalling when another node fails
Ensure that broadcast link messages that have not been acknowledged
by a newly failed node do not get an implied acknowledgement until the
failed node is removed from the broadcast link's map of reachable nodes.

Previously, a race condition allowed a new broadcast link message to be
sent after the implicit acknowledgement processing was completed, but
before the map of reachable nodes was updated, resulting in the message
having an expected acknowledgement count that required the failed node
to explicitly acknowledge the message. Since this would never occur
the new message would remain in the broadcast link's transmit queue
forever, eventually causing the link to become congested and "stall".
Delaying the implicit acknowledgement processing until after the update
of the map of reachable nodes eliminates this race condition and prevents
stalling.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
c5bd4d85d3 tipc: Enhance cleanup of broadcast link when contact with node is lost
Enhances cleanup of broadcast link-related information when contact
with a node is lost.

1) All broadcast link-related cleanup now occurs only if the lost node
   was capable of communicating over the broadcast link.

2) Following cleanup, the lost node is marked as no longer supporting
   the broadcast link, ensuring that any remaining broadcast messages
   received from that node prior to the re-establishment of a normal
   communication link are ignored.

Thanks to Surya [Suryanarayana.Garlapati@emerson.com] for contributing
a prototype version of this patch.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
23f0ff906a tipc: Remove non-executable code to handle broadcast bearer congestion
Eliminates code associated with the sending of unsent broadcast link
traffic when the broadcast pseudo-bearer becomes unblocked following a
temporary congestion situation. This code is non-executable because the
broadcast pseudo-bearer never becomes blocked [see tipc_bcbearer_send()].

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
2ff9f924a5 tipc: Cosmetic changes to broadcast bearer send routine
Updates the comments in the broadcast bearer send routine to more
accurately describe the processing done by the routine. Also replaces
the improper use of a TIPC payload message error status symbol (in a place
that has nothing to do with such errors) with its numeric equivalent.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:36 -04:00
Allan Stephens
2e2d9be845 tipc: Update obsolete references to multicast link
Updates TIPC's broadcast link in a couple of places that were missed
during the transition from its former name ("multicast-link") to its
current name ("broadcast-link"). These changes are essentially cosmetic
and do not affect the overall operation of TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
641c218d12 tipc: Enhance filtering of out-dated link reset messages
Ensure TIPC ignores an out-dated link reset message whose session
number predates the current session number. (Previously, TIPC only
ignored an out-date reset message whose session number was equal
to the current link session number.)

Out-dated link reset messages should not occur under normal circumstances;
however, they can be generated if a link endpoint is unable to send a
link reset message right away and queues it for later delivery, but the
queued message is not sent until after the link is established.

Thanks to Laser [gotolaser@gmail.com] for diagnosing the problem and
contributing a prototype patch.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
f882cb7684 tipc: Initialize peer session field of newly created link endpoint
Initializes the peer session number field of a newly created link
endpoint to an invalid value. This eliminates the remote possibility
that it will accidentally match the session number used by the peer
the first time the link is activated, and cause the link to ignore
a valid RESET message.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
062b4c99fe tipc: Display meaningful peer interface name during link creation
Sets the peer interface portion of the name of a newly created link
endpoint to "unknown". This ensures that state and statistics information
can be properly displayed during the time between the link endpoint's
creation and the time handshaking with its peer is completed.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
ed33a9c4e3 tipc: Eliminate obsolete filter for unexpected unicast messages
Removes a test that ensures unicast link endpoints discard an incoming
message if it will not be consumed by the node itself and cannot be
forwarded to another node, since the preceding test already ensures that
the message is destined for this node and single-cluster TIPC no longer
performs message forwarding.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Allan Stephens
5adeb17c93 tipc: Remove obsolete manipulation of message re-route count field
Eliminates code that increments and validates the re-route count field
of payload messages, since the elimination of multi-cluster support
means that it is no longer necessary for TIPC to forward incoming messages
to another node. (The obsolete code was incorrect anyway, since it
incorrectly incremented the re-route count field of messages that
originated on the node that forwarded the message.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-01 11:16:35 -04:00
Arun Sharma
60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Allan Stephens
e4a0aee47e tipc: Optimize creation of connection protocol messages
Simplifies the creation of connection protocol messages by eliminating
the passing of information that is no longer required, is constant,
or is contained within the port structure that is issuing the message.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:18 -04:00
Allan Stephens
f55b564054 tipc: Don't create payload message using connection protocol routine
Modifies the logic that creates a connection termination payload
message so that it no longer (mis)uses a routine that creates a
connection protocol message. The revised code is now more easily
understood, and avoids setting several fields that are either not
present in payload messages or were being set more than once.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:18 -04:00
Allan Stephens
1c1a551acb tipc: Reject connection protocol message sent to unconnected port
Restructures the logic used in tipc_port_recv_proto_msg() to ensure
that incoming connection protocol messages are handled properly. The
routine now uses a two-stage process that first ensures the message
applies on an existing connection and then processes the request.
This corrects a loophole that allowed a connection probe request to
be processed if it was sent to an unconnected port that had no names
bound to it.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:18 -04:00
Allan Stephens
e244a915ff tipc: Optimize creation of FIN messages
Speeds up the creation of the FIN message that terminates a TIPC
connection. The typical peer termination message is now created by
duplicating the terminating port's standard payload message header
and adjusting the message size, importance, and error code fields,
rather than building all fields of the message from scratch. A FIN
message that is directed to the port itself is created the same way.
but also requires swapping the origin and destination address fields.

In addition to reducing the work required to create FIN messages,
these changes eliminate several instances of duplicated code,

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:18 -04:00
Allan Stephens
741d9eb7b8 tipc: Cleanup of message header size terminology
Performs cosmetic cleanup of the symbolic names used to specify TIPC
payload message header sizes. The revised names now more accurately
reflect the payload messages in which they can appear. In addition,
several places where these payload message symbol names were being used
to create non-payload messages have been updated to use the proper
internal message symbolic name.

No functional changes are introduced by this rework.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:17 -04:00
Allan Stephens
15f4e2b303 tipc: Eliminate useless check when creating internal message
Gets rid of code that allows tipc_msg_init() to create a short
payload message header. This optimization is possible because
there are no longer any callers who require this capability.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:17 -04:00
Allan Stephens
a9948ba24f tipc: Remove unnecessary includes in socket code
Eliminates a pair of #include statements for files that are brought in
automatically by including core.h.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:16 -04:00
Allan Stephens
f01a2b6378 tipc: Eliminate unused field in bearer structure
Gets rid of counter that records the number of times a bearer has
resumed after congestion or blocking, since the value is never
referenced anywhere.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:16 -04:00
Allan Stephens
0f305bf421 tipc: Correct typo in link statistics output
Fixes a minor error in the title of one of the message size profiling
values printed as part of TIPC's link statistics.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:16 -04:00
Allan Stephens
8af4638a29 tipc: Eliminate checks for empty zone list during name translation
Gets rid of a pair of checks to see if a name sequence entry in
TIPC's name table has an empty zone list. These checks are pointless
since the zone list can never be empty (i.e. as soon as the list
becomes empty the associated name sequence entry is deleted).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:16 -04:00
Allan Stephens
f6f0a4d2d0 tipc: Convert name table publication lists to standard kernel lists
Modifies the main circular linked lists of publications used in TIPC's
name table to use the standard kernel linked list type. This change
simplifies the deletion of an existing publication by eliminating
the need to search up to three lists to locate the publication.
The use of standard list routines also helps improve the readability
of the name table code by make it clearer what each list operation
being performed is actually doing.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:16 -04:00
Allan Stephens
b52124a50f tipc: Partition name table instance array info into two parts
Modifies the name table array structure that contains the name
sequence instances for a given name type so that the publication
lists associated with a given instance are stored in a dynamically
allocated structure, rather than being embedded within the array
entry itself. This change is being done for several reasons:

1) It reduces the amount of data that needs to be copied whenever
a given array is expanded or contracted to accommodate the first
publication of a new name sequence or the removal of the last
publication of an existing name sequence.

2) It reduces the amount of memory associated with array entries that
are currently unused.

3) It facilitates the upcoming conversion of the publication lists
from TIPC-specific circular lists to standard kernel lists. (Standard
lists cannot be used with the former array structure because the
relocation of array entries during array expansion and contraction
would corrupt the lists.)

Note that, aside from introducing a small amount of code to dynamically
allocate and free the structure that now holds publication list info,
this change is largely a simple renaming exercise that replaces
references to "sseq->LIST" with "sseq->info->LIST" (or "info->LIST").

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:16 -04:00
Allan Stephens
7eb878ed8e tipc: Eliminate redundant masking in message header routines
Gets rid of unnecessary masking in two routines that set TIPC message
header fields. (The msg_set_bits() routine already takes care of
masking the new value to the correct size.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
74d33b32de tipc: Eliminate message header routines for caching destination node
Gets rid of a pair of routines that provide support for temporarily
caching the destination node for a message in the associated message
buffer's application handle, since this capability is no longer used.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
7dd1bf28cc tipc: Optimizations & corrections to message rejection
Optimizes the creation of a returned payload message by duplicating
the original message and then updating the small number of fields
that need to be adjusted, rather than building the new message header
from scratch. In addition, certain operations that are not always
required are relocated so that they are only done if needed.

These optimizations also have the effect of addressing other issues
that were present previously:

1) Fixes a bug that caused the socket send routines to return the
size of the returned message, rather than the size of the sent
message, when a returnable payload message was sent to a non-existent
destination port.

2) The message header of the returned message now matches that of
the original message more closely. The header is now always the same
size as the original header, and some message header fields that
weren't being initialized in the returned message header are now
populated correctly -- namely the "d" and "s" bits, and the upper
bound of a multicast name instance (where present).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
017dac31dc tipc: Optimize routing of returned payload messages
Reduces the work involved in transmitting a returned payload message
by doing only the work necessary to route such a message directly to
the specified destination port, rather than invoking the code used
to route an arbitrary message to an arbitrary destination.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
76d12527f7 tipc: Add sanity check to detect rejection of non-payload messages
Introduces an internal sanity check to ensure that the only undeliverable
messages TIPC attempts to return to their origin are application payload
messages.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
acc631bf6f tipc: Standardize exit logic for message rejection handling
Modifies the routine that handles the rejection of payload messages
so that it has a single exit point that frees up the rejected message,
thereby eliminating some duplicated code.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
7ae4738e9e tipc: Remove unused sanity test macro
Eliminates a TIPC-specific assert() macro that is no longer used.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
5e72690038 tipc: Convert fatal broadcast sanity check to non-fatal check
Modifies the existing broadcast link sanity check that detects an
attempt to send a message off-node when there are no available
destinations so that it no longer causes a kernel panic; instead,
the check now issues a warning and stack trace and then returns
without sending the message anywhere.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
972a77fbf1 tipc: Revise timings used when sending link request messages
Revises the algorithm governing the sending of link request messages
to take into account the number of nodes each bearer is currently in
contact with, and to ensure more rapid rediscovery of neighboring nodes
if a bearer fails and then recovers.

The discovery object now sends requests at least once a second if it
is not in contact with any other nodes, and at least once a minute if
it has at least one neighbor; if contact with the only neighbor is
lost, the object immediately reverts to its initial rapid-fire search
timing to accelerate the rediscovery process.

In addition, the discovery object now stops issuing link request
messages if it is in contact with the only neighboring node it is
configured to communicate with, since further searching is unnecessary.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:04:02 -04:00
Allan Stephens
1209966cd5 tipc: Add monitoring of number of nodes discovered by bearer
Augments TIPC's discovery object to track the number of neighboring nodes
having an active link to the associated bearer.

This means tipc_disc_update_link_req() becomes either one of:

       tipc_disc_add_dest()
or:
       tipc_disc_remove_dest()

depending on the code flow direction of things.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:04:01 -04:00
Allan Stephens
691a620759 tipc: Enhance sending of discovery object link request messages
Augments TIPC's discovery object to send its initial neighbor discovery
request message as soon as the associated bearer is created, rather than
waiting for its first periodic timeout to occur, thereby speeding up the
discovery process. Also adds a check to suppress the initial request or
subsequent requests if the bearer is blocked at the time the request is
scheduled for transmission.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:04:00 -04:00
Allan Stephens
3a777ff8b1 tipc: Enhance handling of discovery object creation failures
Modifies bearer creation and deletion code to improve handling of
scenarios when a neighbor discovery object cannot be created. The
creation routine now aborts the creation of a bearer if its discovery
object cannot be created, and deletes the newly created bearer, rather
than failing quietly and leaving an unusable bearer hanging around.

Since the exit via the goto label really isn't a definitive failure
in all cases, relabel it appropriately.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:59 -04:00
Allan Stephens
dc63d91eb1 tipc: Introduce routine to enqueue a chain of messages on link tx queue
Create a helper routine to enqueue a chain of sk_buffs to a link's
transmit queue.  It improves readability and the new function is
anticipated to be used more than just once in the future as well.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:58 -04:00
Allan Stephens
2689690469 tipc: Avoid recomputation of outgoing message length
Rework TIPC's message sending routines to take advantage of the total
amount of data value passed to it by the kernel socket infrastructure.
This change eliminates the need for TIPC to compute the size of outgoing
messages itself, as well as the check for an oversize message in
tipc_msg_build().  In addition, this change warrants an explanation:

   -     res = send_packet(NULL, sock, &my_msg, 0);
   +     res = send_packet(NULL, sock, &my_msg, bytes_to_send);

Previously, the final argument to send_packet() was ignored (since the
amount of data being sent was recalculated by a lower-level routine)
and we could just pass in a dummy value (0). Now that the
recalculation is being eliminated, the argument value being passed to
send_packet() is significant and we have to supply the actual amount
of data we want to send.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:57 -04:00
Allan Stephens
c29c3f70c9 tipc: Abort excessive send requests as early as possible
Adds checks to TIPC's socket send routines to promptly detect and
abort attempts to send more than 66,000 bytes in a single TIPC
message or more than 2**31-1 bytes in a single TIPC byte stream request.
In addition, this ensures that the number of iovecs in a send request
does not exceed the limits of a standard integer variable.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:56 -04:00
Allan Stephens
66e019a6af tipc: Strengthen checks for neighboring node discovery
Enhances existing checks on the discovery domain associated with a TIPC
bearer. A bearer can no longer be configured to accept links from itself
only (which would be pointless), or to nodes outside its own cluster
(since multi-cluster support has now been removed from TIPC). Also, the
neighbor discovery routine now validates link setup requests against the
configured discovery domain for the bearer, rather than simply ensuring
the requesting node belongs to the node's own cluster.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:55 -04:00
Paul Gortmaker
1f3de471ad tipc: make zone/cluster mask constants a define
This allows them to be available for easy re-use in other places
and avoids trivial mistakes caused by  "count the f's and 0's".

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:54 -04:00
Allan Stephens
bebc55aeff tipc: Fix sk_buff leaks when link congestion is detected
Modifies a TIPC send routine that did not discard the outgoing sk_buff
if it was not transmitted because of link congestion; this eliminates
the potential for buffer leakage in the many callers who did not clean up
the unsent buffer. (The two routines that previously did discard the unsent
buffer have been updated to eliminate their now-redundant clean up.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:53 -04:00
Allan Stephens
7f47f5c751 tipc: Update destination node field on incoming multicast messages
Sets the destination node field of an incoming multicast message
to the receiving node's network address before handing off the message
to each receiving port. This ensures that, in the event the destination
port returns the message to the sender, the sender can identify which
node the destination port belonged to.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:52 -04:00
Allan Stephens
7462b9e9f6 tipc: Fix problem with bundled multicast message
Set the destination node and destination port fields of an outgoing
multicast message header to zero; this is necessary to ensure that
the receiving node can route the message properly if it was packed
into a bundle due to link congestion. (Previously, there was a chance
that the receiving node would send the unbundled message to a random
node & port, rather than processing the message itself.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:51 -04:00
Allan Stephens
53b94364a7 tipc: Set name lookup scope field properly in all data messages
Ensures that all outgoing data messages have the "name lookup scope"
field of their header set correctly; that is, named multicast messages
now specify cluster-wide name lookup, while messages not using TIPC
naming zero out the lookup field.  (Previously, the lookup scope specified
for these types of messages was inherited from the last message sent
by the sending port.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:50 -04:00
Allan Stephens
7756155744 tipc: Fix issues with fragmentation of an existing message buffer
Modifies the routine that fragments an existing message buffer to
use similar logic to that used when generating fragments from an iovec.
The routine now creates a complete chain of fragments and adds them to
the link transmit queue as a unit, so that the link sends all fragments
or none; this prevents the incomplete transmission of a fragmented
message that might otherwise result because of link congestion or
memory exhaustion. This change also ensures that the counter recording
the number of fragmented messages sent by the link is now incremented
only if the message is actually sent.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:49 -04:00
Allan Stephens
e0f085964c tipc: Avoid pointless masking of fragmented message identifier
Eliminates code that restricts a link's counter of its fragmented
messages to a 16-bit value, since the counter value is automatically
restricted to this range when it is written into the message header.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:48 -04:00
Allan Stephens
670c54083a tipc: Don't initialize link selector field in fragmented messages
Eliminates code that sets the link selector field in the header of
fragmented messages, since this information is never referenced.
(The unnecessary initialization was harmless as it was over-written
by the fragmented message identifier value before the fragments were
transmitted.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:47 -04:00
Allan Stephens
7775bcc722 tipc: Remove code to emulate loss of broadcast messages
Eliminates optional code used to test TIPC's ability to recover
from lost broadcast messages. This code duplicates functionality
already provided by the network stack's QoS option "network emulator".

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:46 -04:00
Allan Stephens
92138d1f25 tipc: Cosmetic consolidation of internal message type definitions
Half of the #define entries in msg.h were down at the bottom
of the header, instead of up at the top before any of the static
inlines etc.   Relocate them up to the top, to be consistent with
the other normal linux header file layout conventions.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:45 -04:00
Allan Stephens
19f53d2cef tipc: Eliminate unused routing message definitions
Gets rid of unused constants defining the types used in routing
messages. These messages no longer exist in TIPC now that multicluster
and multizone support has been eliminated.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:44 -04:00
Allan Stephens
cc4c4353f0 tipc: Update comments in message header include file
Removes comments in TIPC's message header include file that are
outdated and/or unnecessary. Also introduces short comments (or
supplements existing ones) to better describe several set of existing
symbolic constants.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:36 -04:00
Michal Marek
97fbdc1f77 tipc: Drop __TIME__ usage
The kernel already prints its build timestamp during boot, no need to
repeat it in random drivers and produce different object files each
time.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: netdev@vger.kernel.org
Cc: tipc-discussion@lists.sourceforge.net
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 10:31:03 -04:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Paul Gortmaker
1fa073803e tipc: delete extra semicolon blocking node deletion
Remove bogus semicolon only recently introduced in 34e46258cb
that blocks cleanup of nodes for N>1 on shutdown.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-14 12:21:12 -04:00
Allan Stephens
390bce4237 tipc: Eliminate obsolete routine for handling routed messages
Eliminates a routine that is used in handling messages arriving from
another cluster or zone. Such messages can no longer be received by TIPC
now that multi-cluster and multi-zone network support has been eliminated.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:19 -04:00
Allan Stephens
7945c1fb02 tipc: Eliminate remaining support for routing table messages
Gets rid of all remaining code relating to ROUTE_DISTRIBUTOR messages.
These messages were only used in multi-cluster and multi-zone networks,
which TIPC no longer supports. (For safety, TIPC now treats such messages
the same way that it handles other unrecognized messages.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:19 -04:00
Allan Stephens
50d492321a tipc: Remove bearer flag indicating existence of broadcast address
Eliminates the flag in the TIPC bearer structure that indicates if
the bearer supports broadcasting, since the flag is always set to 1
and serves no useful purpose.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:19 -04:00
Allan Stephens
f9107ebe7d tipc: Don't respond to neighbor discovery request on blocked bearer
Adds a check to prevent TIPC from trying to respond to an incoming
LINK_CONFIG request message if the associated bearer is currently
prohibited from sending messages.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:19 -04:00
Allan Stephens
d901a42b27 tipc: Eliminate unnecessary constant for neighbor discovery msg size
Eliminates an unnecessary constant that defines the size of a LINK_CONFIG
message, and uses one of the existing standard message size symbols in
its place. (The defunct constant was located in the wrong place anyway,
since it was grouped with other constants that define message users instead
of message sizes.)

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:18 -04:00
Allan Stephens
a2b58de2e3 tipc: Remove unused field in bearer structure
Eliminates a field in TIPC's bearer objects that is set, but never
referenced.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:18 -04:00
Allan Stephens
50d3e6399a tipc: Correct misnamed references to neighbor discovery domain
Renames items that are improperly labelled as "network scope" items
(which are represented by simple integer values) rather than "network
domain" items (which are represented by <Z.C.N>-type network addresses).
This change is purely cosmetic, and does not affect the operation of TIPC.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:18 -04:00
Allan Stephens
37b9c08a88 tipc: Optimizations to link creation code
Enhances link creation code as follows:

1) Detects illegal attempts to add a requested link earlier in the
   link creation process. This prevents TIPC from wasting time
   initializing a link object it then throws away, and also eliminates
   the code needed to do the throwing away.

2) Passes in the node object associated with the requested link.
   This allows TIPC to eliminate a search to locate the node object,
   as well as code that attempted to create the node if it doesn't
   exist.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:18 -04:00
Allan Stephens
fa2bae2d5b tipc: Give Tx of discovery responses priority over link messages
Delay releasing the node lock when processing a neighbor discovery
message until after the optional discovery response message has been
sent. This helps ensure that any link protocol messages sent by a
link endpoint created as a result of a neighbor discovery request
are received after the discovery response is received, thereby
giving the receiving node a chance to create a peer link endpoint to
consume those link protocol messages, if one does not already exist.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:18 -04:00
Allan Stephens
a728750e4f tipc: Cosmetic changes to neighbor discovery logic
Reworks the appearance of the routine that processes incoming
LINK_CONFIG messages to keep the main logic flow at a consistent level
of indentation, and to add comments outlining the various phases involved
in processing each message. This rework is being done to allow upcoming
enhancements to this routine to be integrated more cleanly.

The diff isn't really readable, so know that it was a case of the
old code being like:

	tipc_disc_recv_msg(..)
	{
		if (in_own_cluster(orig)) {
			...
			lines and lines of stuff
			...
		}
	}

which is now replaced with the more sane:

	tipc_disc_recv_msg(..)
	{
		if (!in_own_cluster(orig))
			return;
		...
		lines and lines of stuff
		...
	}

Instances of spin locking within the reindented block were replaced with
the identical tipc_node_[un]lock() abstractions.  Note that all these
changes are cosmetic in nature, and do not change the way LINK_CONFIG
messages are processed.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:18 -04:00
Allan Stephens
75f0aa4990 tipc: Fix redundant link field handling in link protocol message
Ensures that the "redundant link exists" field of the LINK_PROTOCOL
messages sent by a link endpoint is set if and only if the sending
node has at least one other working link to the peer node. Previously,
the bit was set only if there were at least 2 working links to the peer
node, meaning the bit was incorrectly left unset in messages sent by a
non-working link endpoint when exactly one alternate working link was
available. The revised code now takes the state of the link sending
the message into account when deciding if an alternate link exists.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:18 -04:00
Allan Stephens
77f167fcce tipc: make msg_set_redundant_link() consistent with other set ops
All the other boolean like msg_set_X(m) operations don't
export both a msg_set_X(a) and a msg_clear_X(m), but instead
just have the single msg_set_X(m, val) variant.

Make the redundant_link one consistent by having the set take
a value, and delete the msg_clear_redundant_link() anomoly.
This is a cosmetic change and should not change behaviour.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Paul Gortmaker
8f19afb2db tipc: cosmetic - function names are not to be full sentences
Function names like "tipc_node_has_redundant_links" are unweildy
and result in long lines even for simple lines.  The "has" doesn't
contribute any value add, so dropping that is a slight step in the
right direction.   This is a cosmetic change, basic result of:

for i in `grep -l tipc_node_has_ *` ; do sed -i s/tipc_node_has_/tipc_node_/ $i ; done

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
e7b3acb6a8 tipc: Eliminate timestamp from link protocol messages
Removes support for the timestamp field of TIPC's link protocol messages.

This field was previously used to hold an OS-dependent timestamp value
that was used to assist in debugging early versions of TIPC. The field
has now been deemed unnecessary and has been removed from the latest TIPC
specification. This change has no impact on the operation of TIPC since
the field was set by TIPC, but never referenced.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
34e46258cb tipc: manually inline net_start/stop, make assoc. vars static
Relocates network-related variables into the subsystem files where
they are now primarily used (following the recent rework of TIPC's
node table), and converts globals into locals where possible. Changes
the initialization of tipc_num_links from run-time to compile-time,
and eliminates the net_start routine that becomes empty as a result.
Also eliminates the corresponding net_stop routine by moving its
(trivial) content into the one location that called the routine.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
672d99e19a tipc: Convert node object array to a hash table
Replaces the dynamically allocated array of pointers to the cluster's
node objects with a static hash table. Hash collisions are resolved
using chaining, with a typical hash chain having only a single node,
to avoid degrading performance during processing of incoming packets.
The conversion to a hash table reduces the memory requirements for
TIPC's node table to approximately the same size it had prior to
the previous commit.

In addition to the hash table itself, TIPC now also maintains a
linked list for the node objects, sorted by ascending network address.
This list allows TIPC to continue sending responses to user space
applications that request node and link information in sorted order.
The list also improves performance when name table update messages are
sent by making it easier to identify the nodes that must be notified.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
f831c963b5 tipc: Eliminate configuration for maximum number of cluster nodes
Gets rid of the need for users to specify the maximum number of
cluster nodes supported by TIPC. TIPC now automatically provides
support for all 4K nodes allowed by its addressing scheme.

Note: This change sets TIPC's memory usage to the amount used by
a maximum size node table with 4K entries.  An upcoming patch that
converts the node table from a linear array to a hash table will
compact the node table to a more efficient design, but for clarity
it is nice to have all the Kconfig infrastruture go away separately.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
d1bcb11544 tipc: Split up unified structure of network-related variables
Converts the fields of the global "tipc_net" structure into individual
variables.  Since the struct was never referenced as a complete unit,
its existence was pointless.  This will facilitate upcoming changes to
TIPC's node table and simpify upcoming relocation of the variables so
they are only visible to the files that actually use them.

This change is essentially cosmetic in nature, and doesn't affect the
operation of TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
9df3b7eb6e tipc: Fix problem with missing link in "tipc-config -l" output
Removes a race condition that could cause TIPC's internal counter
of the number of links it has to neighboring nodes to have the
incorrect value if two independent threads of control simultaneously
create new link endpoints connecting to two different nodes using two
different bearers. Such under counting would result in TIPC failing to
list the final link(s) in its response to a configuration request to
list all of the node's links. The counter is now updated atomically
to ensure that simultaneous increments do not interfere with each
other.

Thanks go to Peter Butler <pbutler@pt.com> for his assistance in
diagnosing and fixing this problem.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:16 -04:00
Allan Stephens
71092ea122 tipc: Add support for SO_RCVTIMEO socket option
Adds support for the SO_RCVTIMEO socket option to TIPC's socket
receive routines.

Thanks go out to Raj Hegde <rajenhegde@yahoo.ca> for his contribution
to the development and testing this enhancement.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:16 -04:00
Allan Stephens
f137917332 tipc: Cosmetic changes to node subscription code
Relocates the code that notifies users of node subscriptions so that
it is adjacent to the rest of the routines that implement TIPC's node
subscription capability. Renames the name table routine that is
invoked by a node subscription to better reflect its purpose and to
be consistent with other, similar name table routines.

These changes are cosmetic in nature, and do not alter the behavior
of TIPC.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:16 -04:00
Allan Stephens
431697eb60 tipc: Prevent null pointer error when removing a node subscription
Prevents a null pointer dereference from occurring if a node subscription
is triggered at the same time that the subscribing port or publication is
terminating the subscription. The problem arises if the triggering routine
asynchronously activates and deregisters the node subscription while
deregistration is already underway -- the deregistration routine may find
that the pointer it has just verified to be non-NULL is now NULL.
To avoid this race condition the triggering routine now simply marks the
node subscription as defunct (to prevent it from re-activating)
instead of deregistering it. The subscription is now both deregistered
and destroyed only when the subscribing port or publication code terminates
the node subscription.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:16 -04:00
Allan Stephens
a3796f895f tipc: Add network address mask helper routines
Introduces a pair of helper routines that convert the network address
for a TIPC node into the network address for its cluster or zone.

This is a cosmetic change designed to avoid future errors caused by
the incorrect use of address bitmasks, and does not alter the existing
operation of TIPC.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:16 -04:00
Allan Stephens
aa84729484 tipc: Correct broadcast link peer info when displaying links
Fixes a typo in the calculation of the network address of a node's own
cluster when generating a response to the configuration command that
lists all of the node's links. The correct mask value for a <Z.C.N>
network address uses 1's for the 8-bit zone and 12-bit cluster parts
and 0's for the 12-bit node part.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:16 -04:00
Allan Stephens
0232fd0ac4 tipc: Allow receiving into iovec containing multiple entries
Enhances TIPC's socket receive routines to support iovec structures
containing more than a single entry. This change leverages existing
sk_buff routines to do most of the work; the only significant change
to TIPC itself is that an sk_buff now records how much data has been
already consumed as an numeric offset, rather than as a pointer to
the first unread data byte.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:16 -04:00
Allan Stephens
bf781ecfc6 tipc: Avoid reliable broadcast preparation for NACK messages
Enhance TIPC to skip unnecessary (and, in some cases, redundant)
preparation work when sending a broadcast link NACK message, since this
preparation is only required for broadcast messages that are sent in a
reliable manner. This change also fixes a bug that caused NACK messages
to be improperly counted as "TX packets" in TIPC's broadcast link
statistics.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23 18:05:23 -05:00