Introduced in f9e42b8535 ("net: sctp: sideeffect: throw BUG if
primary_path is NULL"), we intended to find a buggy assoc that's
part of the assoc hash table with a primary_path that is NULL.
However, we better remove the BUG_ON for now and find a more
suitable place to assert for these things as Mark reports that
this also triggers the bug when duplication cookie processing
happens, and the assoc is not part of the hash table (so all
good in this case). Such a situation can for example easily be
reproduced by:
tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 1 1 1 1 1 1
tc qdisc add dev eth0 parent 1:2 handle 20: netem loss 20%
tc filter add dev eth0 protocol ip parent 1: prio 2 u32 match ip \
protocol 132 0xff match u8 0x0b 0xff at 32 flowid 1:2
This drops 20% of COOKIE-ACK packets. After some follow-up
discussion with Vlad we came to the conclusion that for now we
should still better remove this BUG_ON() assertion, and come up
with two follow-ups later on, that is, i) find a more suitable
place for this assertion, and possibly ii) have a special
allocator/initializer for such kind of temporary assocs.
Reported-by: Mark Thomas <Mark.Thomas@metaswitch.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
High-availability Seamless Redundancy ("HSR") provides instant failover
redundancy for Ethernet networks. It requires a special network topology where
all nodes are connected in a ring (each node having two physical network
interfaces). It is suited for applications that demand high availability and
very short reaction time.
HSR acts on the Ethernet layer, using a registered Ethernet protocol type to
send special HSR frames in both directions over the ring. The driver creates
virtual network interfaces that can be used just like any ordinary Linux
network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring
must be HSR capable.
This code is a "best effort" to comply with the HSR standard as described in
IEC 62439-3:2010 (HSRv0).
Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joby Poriyath provided a xen-netback patch to reduce the size of
xenvif structure as some netdev allocation could fail under
memory pressure/fragmentation.
This patch is handling the problem at the core level, allowing
any netdev structures to use vmalloc() if kmalloc() failed.
As vmalloc() adds overhead on a critical network path, add __GFP_REPEAT
to kzalloc() flags to do this fallback only when really needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Joby Poriyath <joby.poriyath@citrix.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes an outstanding bug found through IPVS, where SCTP packets
with skb->data_len > 0 (non-linearized) and empty frag_list, but data
accumulated in frags[] member, are forwarded with incorrect checksum
letting SCTP initial handshake fail on some systems. Linearizing each
SCTP skb in IPVS to prevent that would not be a good solution as
this leads to an additional and unnecessary performance penalty on
the load-balancer itself for no good reason (as we actually only want
to update the checksum, and can do that in a different/better way
presented here).
The actual problem is elsewhere, namely, that SCTP's checksumming
in sctp_compute_cksum() does not take frags[] into account like
skb_checksum() does. So while we are fixing this up, we better reuse
the existing code that we have anyway in __skb_checksum() and use it
for walking through the data doing checksumming. This will not only
fix this issue, but also consolidates some SCTP code with core
sk_buff code, bringing it closer together and removing respectively
avoiding reimplementation of skb_checksum() for no good reason.
As crc32c() can use hardware implementation within the crypto layer,
we leave that intact (it wraps around / falls back to e.g. slice-by-8
algorithm in __crc32c_le() otherwise); plus use the __crc32c_le_combine()
combinator for crc32c blocks.
Also, we remove all other SCTP checksumming code, so that we only
have to use sctp_compute_cksum() from now on; for doing that, we need
to transform SCTP checkumming in output path slightly, and can leave
the rest intact.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, skb_checksum walks over 1) linearized, 2) frags[], and
3) frag_list data and calculats the one's complement, a 32 bit
result suitable for feeding into itself or csum_tcpudp_magic(),
but unsuitable for SCTP as we're calculating CRC32c there.
Hence, in order to not re-implement the very same function in
SCTP (and maybe other protocols) over and over again, use an
update() + combine() callback internally to allow for walking
over the skb with different algorithms.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the intent to dump other accounting data later.
This patch is a cleanup.
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Encapsulate counters for both directions into nf_conn_acct. During
that process also consistently name pointers to the extend 'acct',
not 'counters'. This patch is a cleanup.
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We don't validate iph->ihl which may lead a dead loop if we meet a IPIP
skb whose iph->ihl is zero. Fix this by failing immediately when iph->ihl
is evil (less than 5).
This issue were introduced by commit ec5efe7946
(rps: support IPIP encapsulation).
Cc: Eric Dumazet <edumazet@google.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
net/xfrm/xfrm_policy.c
Minor merge conflict in xfrm_policy.c, consisting of overlapping
changes which were trivial to resolve.
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
1) Fix a possible race on ipcomp scratch buffers because
of too early enabled siftirqs. From Michal Kubecek.
2) The current xfrm garbage collector threshold is too small
for some workloads, resulting in bad performance on these
workloads. Increase the threshold from 1024 to 32768.
3) Some codepaths might not have a dst_entry attached to the
skb when calling xfrm_decode_session(). So add a check
to prevent a null pointer dereference in this case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Flow->hash can be used to detect hash collisions and avoid flow key
compare in flow lookup.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
tcp_flags=flags/mask
Bitwise match on TCP flags. The flags and mask are 16-bit num‐
bers written in decimal or in hexadecimal prefixed by 0x. Each
1-bit in mask requires that the corresponding bit in port must
match. Each 0-bit in mask causes the corresponding bit to be
ignored.
TCP protocol currently defines 9 flag bits, and additional 3
bits are reserved (must be transmitted as zero), see RFCs 793,
3168, and 3540. The flag bits are, numbering from the least
significant bit:
0: FIN No more data from sender.
1: SYN Synchronize sequence numbers.
2: RST Reset the connection.
3: PSH Push function.
4: ACK Acknowledgement field significant.
5: URG Urgent pointer field significant.
6: ECE ECN Echo.
7: CWR Congestion Windows Reduced.
8: NS Nonce Sum.
9-11: Reserved.
12-15: Not matchable, must be zero.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Widen TCP flags handling from 7 bits (uint8_t) to 12 bits (uint16_t).
The kernel interface remains at 8 bits, which makes no functional
difference now, as none of the higher bits is currently of interest
to the userspace.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
OVS already can handle all types of segmentation offloads that
are supported by the kernel.
Following patch specifically enables UDP and IPV6 segmentation
offloads.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Resolve cherry-picking conflicts:
Conflicts:
mm/huge_memory.c
mm/memory.c
mm/mprotect.c
See this upstream merge commit for more details:
52469b4fcd Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On some codepaths the skb does not have a dst entry
when xfrm_decode_session() is called. So check for
a valid skb_dst() before dereferencing the device
interface index. We use 0 as the device index if
there is no valid skb_dst(), or at reverse decoding
we use skb_iif as device interface index.
Bug was introduced with git commit bafd4bd4dc
("xfrm: Decode sessions with output interface.").
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We have one report of a crash in xs_tcp_setup_socket.
The call path to the crash is:
xs_tcp_setup_socket -> inet_stream_connect -> lock_sock_nested.
The 'sock' passed to that last function is NULL.
The only way I can see this happening is a concurrent call to
xs_close:
xs_close -> xs_reset_transport -> sock_release -> inet_release
inet_release sets:
sock->sk = NULL;
inet_stream_connect calls
lock_sock(sock->sk);
which gets NULL.
All calls to xs_close are protected by XPRT_LOCKED as are most
activations of the workqueue which runs xs_tcp_setup_socket.
The exception is xs_tcp_schedule_linger_timeout.
So presumably the timeout queued by the later fires exactly when some
other code runs xs_close().
To protect against this we can move the cancel_delayed_work_sync()
call from xs_destory() to xs_close().
As xs_close is never called from the worker scheduled on
->connect_worker, this can never deadlock.
Signed-off-by: NeilBrown <neilb@suse.de>
[Trond: Make it safe to call cancel_delayed_work_sync() on AF_LOCAL sockets]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch drops the direct memcpy on skb and uses the right skb
memcpy functions. Also remove an unnecessary check if plen is non zero.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is necessary to access network header with the skb_network_header
function instead of calculate the position with mac_len, etc.
Do the same for the transport header, when we replace the IPv6 header
with the 6LoWPAN header.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the mac header length while creating the 802.15.4 mac header.
Drop the function for recalculate mac header length in upper layers
which was static and works for intra pan communication only.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
On receiving side we don't need to set any headers in skb because the
6LoWPAN layer do not access it. Currently these values will set twice
after calling netif_rx.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After reading the function rt6_check_neigh(), we can
know that the RT6_NUD_FAIL_SOFT can be returned only
when the IS_ENABLE(CONFIG_IPV6_ROUTER_PREF) is false.
so in function find_match(), there is no need to execute
the statement !IS_ENABLED(CONFIG_IPV6_ROUTER_PREF).
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The message dispatching part of tipc_recv_msg() is wrapped layers of
while/if/if/switch, causing out-of-control indentation and does not
look very good. We reduce two indentation levels by separating the
message dispatching from the blocks that checks link state and
sequence numbers, allowing longer function and arg names to be
consistently indented without wrapping. Additionally we also rename
"cont" label to "discard" and add one new label called "unlock_discard"
to make code clearer. In all, these are cosmetic changes that do not
alter the operation of TIPC in any way.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Andreas Bofjäll <andreas.bofjall@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fast Open currently has a fall back feature to address SYN-data being
dropped but it requires the middle-box to pass on regular SYN retry
after SYN-data. This is implemented in commit aab487435 ("net-tcp:
Fast Open client - detecting SYN-data drops")
However some NAT boxes will drop all subsequent packets after first
SYN-data and blackholes the entire connections. An example is in
commit 356d7d8 "netfilter: nf_conntrack: fix tcp_in_window for Fast
Open".
The sender should note such incidents and fall back to use the regular
TCP handshake on subsequent attempts temporarily as well: after the
second SYN timeouts the original Fast Open SYN is most likely lost.
When such an event recurs Fast Open is disabled based on the number of
recurrences exponentially.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike UDP or TCP, we do not take the pseudo-header into
account in SCTP checksums. So in case port mapping is the
very same, we do not need to recalculate the whole SCTP
checksum in software, which is very expensive.
Also, similarly as in TCP, take into account when a private
helper mangled the packet. In that case, we also need to
recalculate the checksum even if ports might be same.
Thanks for feedback regarding skb->ip_summed checks from
Julian Anastasov; here's a discussion on these checks for
snat and dnat:
* For snat_handler(), we can see CHECKSUM_PARTIAL from
virtual devices, and from LOCAL_OUT, otherwise it
should be CHECKSUM_UNNECESSARY. In general, in snat it
is more complex. skb contains the original route and
ip_vs_route_me_harder() can change the route after
snat_handler. So, for locally generated replies from
local server we can not preserve the CHECKSUM_PARTIAL
mode. It is an chicken or egg dilemma: snat_handler
needs the device after rerouting (to check for
NETIF_F_SCTP_CSUM), while ip_route_me_harder() wants
the snat_handler() to put the new saddr for proper
rerouting.
* For dnat_handler(), we should not see CHECKSUM_COMPLETE
for SCTP, in fact the small set of drivers that support
SCTP offloading return CHECKSUM_UNNECESSARY on correctly
received SCTP csum. We can see CHECKSUM_PARTIAL from
local stack or received from virtual drivers. The idea is
that SCTP decides to avoid csum calculation if hardware
supports offloading. IPVS can change the device after
rerouting to real server but we can preserve the
CHECKSUM_PARTIAL mode if the new device supports
offloading too. This works because skb dst is changed
before dnat_handler and we see the new device. So, checks
in the 'if' part will decide whether it is ok to keep
CHECKSUM_PARTIAL for the output. If the packet was with
CHECKSUM_NONE, hence we deal with unknown checksum. As we
recalculate the sum for IP header in all cases, it should
be safe to use CHECKSUM_UNNECESSARY. We can forward wrong
checksum in this case (without cp->app). In case of
CHECKSUM_UNNECESSARY, the csum was valid on receive.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Currently multicast code attempts to extrace the vlan id from
the skb even when vlan filtering is disabled. This can lead
to mdb entries being created with the wrong vlan id.
Pass the already extracted vlan id to the multicast
filtering code to make the correct id is used in
creation as well as lookup.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross says:
====================
One patch for net/3.12 fixing an issue where devices could be in an
invalid state they are removed while still attached to OVS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the URLs in the Kconfig file to the new pages at sangoma.com and cisco.com
Signed-off-by: Michael Drüing <michael@drueing.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This work contains a lightweight BPF-based traffic classifier that can
serve as a flexible alternative to ematch-based tree classification, i.e.
now that BPF filter engine can also be JITed in the kernel. Naturally, tc
actions and policies are supported as well with cls_bpf. Multiple BPF
programs/filter can be attached for a class, or they can just as well be
written within a single BPF program, that's really up to the user how he
wishes to run/optimize the code, e.g. also for inversion of verdicts etc.
The notion of a BPF program's return/exit codes is being kept as follows:
0: No match
-1: Select classid given in "tc filter ..." command
else: flowid, overwrite the default one
As a minimal usage example with iproute2, we use a 3 band prio root qdisc
on a router with sfq each as leave, and assign ssh and icmp bpf-based
filters to band 1, http traffic to band 2 and the rest to band 3. For the
first two bands we load the bytecode from a file, in the 2nd we load it
inline as an example:
echo 1 > /proc/sys/net/core/bpf_jit_enable
tc qdisc del dev em1 root
tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
tc qdisc add dev em1 parent 1:1 sfq perturb 16
tc qdisc add dev em1 parent 1:2 sfq perturb 16
tc qdisc add dev em1 parent 1:3 sfq perturb 16
tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1
tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1
tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2
tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3
BPF programs can be easily created and passed to tc, either as inline
'bytecode' or 'bytecode-file'. There are a couple of front-ends that can
compile opcodes, for example:
1) People familiar with tcpdump-like filters:
tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf
2) People that want to low-level program their filters or use BPF
extensions that lack support by libpcap's compiler:
bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf
ssh.ops example code:
ldh [12]
jne #0x800, drop
ldb [23]
jneq #6, drop
ldh [20]
jset #0x1fff, drop
ldxb 4 * ([14] & 0xf)
ldh [%x + 14]
jeq #0x16, pass
ldh [%x + 16]
jne #0x16, drop
pass: ret #-1
drop: ret #0
It was chosen to load bytecode into tc, since the reverse operation,
tc filter list dev em1, is then able to show the exact commands again.
Possible follow-up work could also include a small expression compiler
for iproute2. Tested with the help of bmon. This idea came up during
the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from
Eric Dumazet!
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
This pull request contains the following netfilter fix:
* fix --queue-bypass in xt_NFQUEUE revision 3. While adding the
revision 3 of this target, the bypass flags were not correctly
handled anymore, thus, breaking packet bypassing if no application
is listening from userspace, patch from Holger Eitzenberger,
reported by Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
V3 of the NFQUEUE target ignores the --queue-bypass flag,
causing packets to be dropped when the userspace listener
isn't running.
Regression is in since 8746ddcf12 ("netfilter: xt_NFQUEUE:
introduce CPU fanout").
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
struct esp_data consists of a single pointer, vanishing the need for it
to be a structure. Fold the pointer into 'data' direcly, removing one
level of pointer indirection.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The padlen member of struct esp_data is always zero. Get rid of it.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
UFO as well as UDP_CORK do not respect IP_PMTUDISC_DO and
IP_PMTUDISC_PROBE well enough.
UFO enabled packet delivery just appends all frags to the cork and hands
it over to the network card. So we just deliver non-DF udp fragments
(DF-flag may get overwritten by hardware or virtual UFO enabled
interface).
UDP_CORK does enqueue the data until the cork is disengaged. At this
point it sets the correct IP_DF and local_df flags and hands it over to
ip_fragment which in this case will generate an icmp error which gets
appended to the error socket queue. This is not reflected in the syscall
error (of course, if UFO is enabled this also won't happen).
Improve this by checking the pmtudisc flags before appending data to the
socket and if we still can fit all data in one packet when IP_PMTUDISC_DO
or IP_PMTUDISC_PROBE is set, only then proceed.
We use (mtu-fragheaderlen) to check for the maximum length because we
ensure not to generate a fragment and non-fragmented data does not need
to have its length aligned on 64 bit boundaries. Also the passed in
ip_options are already aligned correctly.
Maybe, we can relax some other checks around ip_fragment. This needs
more research.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 6ff50cd555 ("tcp: gso: do not generate out of order packets")
had an heuristic that can trigger a warning in skb_try_coalesce(),
because skb->truesize of the gso segments were exactly set to mss.
This breaks the requirement that
skb->truesize >= skb->len + truesizeof(struct sk_buff);
It can trivially be reproduced by :
ifconfig lo mtu 1500
ethtool -K lo tso off
netperf
As the skbs are looped into the TCP networking stack, skb_try_coalesce()
warns us of these skb under-estimating their truesize.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code for privacy extentions is very mature, and making it
configurable only gives marginal memory/code savings in exchange
for obfuscation and hard to read code via CPP ifdef'ery.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the assignment of skb->dev. We don't need it here because
we use the netdev_alloc_skb_ip_align function which already sets the
skb->dev.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch uses the netdev_alloc_skb instead dev_alloc_skb function and
drops the seperate assignment to skb->dev.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The err variable can only be zero in this case.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In gss_encode_v1_msg, it is pointless to BUG() after the overflow has
happened. Replace the existing sprintf()-based code with scnprintf(),
and warn if an overflow is ever triggered.
In gss_encode_v0_msg, replace the runtime BUG_ON() with an appropriate
compile-time BUILD_BUG_ON.
Reported-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add the missing 'break' to ensure that we don't corrupt a legacy 'v0' type
message by appending the 'v1'.
Cc: Bruce Fields <bfields@fieldses.org>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If req allocated failed just goto out_free, no need to check the
'i < num_prealloc'. There is just code simplification, no
functional changes.
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
rpc_clnt_set_transport should use rcu_derefence_protected(), as it is
only safe to be called with the rpc_clnt::cl_lock held.
Cc: Chuck Lever <Chuck.Lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add an RPC client API to redirect an rpc_clnt's transport from a
source server to a destination server during a migration event.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ cel: forward ported to 3.12 ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The rpc_client_register() helper was added in commit e73f4cc0,
"SUNRPC: split client creation routine into setup and registration,"
Mon Jun 24 11:52:52 2013. In a subsequent patch, I'd like to invoke
rpc_client_register() from a context where a struct rpc_create_args
is not available.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds the filter chain type which is required to
create filter chains in the bridge family from userspace.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch fixes this:
CHECK net/netfilter/nft_nat.c
net/netfilter/nft_nat.c:50:43: warning: incorrect type in assignment (different base types)
net/netfilter/nft_nat.c:50:43: expected restricted __be32 [addressable] [usertype] ip
net/netfilter/nft_nat.c:50:43: got unsigned int [unsigned] [usertype] <noident>
net/netfilter/nft_nat.c:51:43: warning: incorrect type in assignment (different base types)
net/netfilter/nft_nat.c:51:43: expected restricted __be32 [addressable] [usertype] ip
net/netfilter/nft_nat.c:51:43: got unsigned int [unsigned] [usertype] <noident>
net/netfilter/nft_nat.c:65:37: warning: incorrect type in assignment (different base types)
net/netfilter/nft_nat.c:65:37: expected restricted __be16 [addressable] [assigned] [usertype] all
net/netfilter/nft_nat.c:65:37: got unsigned int [unsigned] <noident>
net/netfilter/nft_nat.c:66:37: warning: incorrect type in assignment (different base types)
net/netfilter/nft_nat.c:66:37: expected restricted __be16 [addressable] [assigned] [usertype] all
net/netfilter/nft_nat.c:66:37: got unsigned int [unsigned] <noident>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
when CONFIG_NF_TABLES[_MODULE] is not enabled,
but CONFIG_NF_TABLES_BRIDGE is enabled:
net/bridge/netfilter/nf_tables_bridge.c: In function 'nf_tables_bridge_init_net':
net/bridge/netfilter/nf_tables_bridge.c:24:5: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:25:9: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:28:2: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:30:34: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:35:11: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c: In function 'nf_tables_bridge_exit_net':
net/bridge/netfilter/nf_tables_bridge.c:41:27: error: 'struct net' has no member named 'nft'
net/bridge/netfilter/nf_tables_bridge.c:42:11: error: 'struct net' has no member named 'nft'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The nl80211 attribute NL80211_ATTR_CSA_C_OFF_BEACON should be nested
inside NL80211_ATTR_CSA_IES, but commit ee4bc9e758
("nl80211: enable IBSS support for channel switch announcements")
added a check in the outer message attributes.
Fix channel switch calls by removing the erroneus condition.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
CSA completion could call in a driver
bss_info_changed() with a garbled `changed` flag
leading to all sorts of problems.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Trigger the mesh channel switching procedure if the mesh STA
happens to miss the CSA action frame but able to receive the
beacon containing the CSA and MCSP elements from its peer
mesh STAs.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
[fix locking in ieee80211_mesh_process_chnswitch()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the required procedures for mesh channel switching as defined
in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA
and MCSP elements as followed:
* Add the function for updating the beacon and probe response frames
with CSA and MCSP elements during the period of switching to the new
channel. Both CSA and MCSP elements must be included in beacon and
probe response frames until the intended channel switch time.
* The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements
will then be removed from the beacon or probe response frames once the
new channel is switched to.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow the triggering of CSA frame using mesh interface. The
rules are more or less same with IBSS, such as not allowed to
change between the band and channel width has to be same from
the previous mode. Also, move the ieee80211_send_action_csa
to a common space so that it can be re-used by mesh interface.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Process the CSA frame according to the procedures define in IEEE Std
802.11-2012 section 10.9.8.4.3 as follow:
* The mesh channel switch parameters element (MCSP) must be availabe.
* If the MCSP's TTL is 1, drop the frame but still process the CSA.
* If the MCSP's precedence value is less than or equal to the current
precedence value, drop the frame and do not process the CSA.
* The CSA frame is forwarded after TTL is decremented by 1 and the
initiator field is set to 0. Transmit restrict field and others
are maintained as is.
* No beacon or probe response frame are handled here.
Also, introduce the debug message used for mesh CSA purpose.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the channel switch IE parsing to reduce the number
of function parameters.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This can be used by a driver to prepare skbs for transmission, which were
obtained via functions such as ieee80211_probereq_get or
ieee80211_nullfunc_get.
This is useful for drivers that want to send those frames directly, but
need rate control information to be prepared first.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers can now use this to parse the regulatory request and
be more verbose when needed.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch fixes errors in the mesh powersave logic which
cause that remote peers do not get peer power mode change
notifications and mesh peer service periods (MPSPs) got
stuck.
When closing a peer link, set the (now invalid) peer-specific
power mode to 'unknown'.
Avoid overhead when local power mode is unchanged.
Reliably clear MPSP flags on peering status update.
Avoid MPSP flags getting stuck by not requesting a further
MPSP ownership if we already are an MPSP owner.
Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
6c17b77b67 ensures that a device's
mac80211 queues will remain stopped while offchannel. Since the
vif can no longer be offchannel when the queues wake it's not
necessary to check for this before waking its netdev queues.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Including ACPI ID for Broadcom GPS receiver BCM4752.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will add the relevant values like the gpios and the
type in rfkill_gpio_platform_data to the rfkill_gpio_data
structure. It will allow those values to be easily picked
from DT and ACPI tables later.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This sets the direction of the gpio once when it's requested,
and uses the spinlock-safe gpio_set_state() to change the
state.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use a simple flag to see the state of the clock, and make
the clock available even without a name. Also, get rid of
HAVE_CLK dependency.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
And remove now unneeded resource freeing.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow changing to DFS channels if the channel is available for
beaconing and userspace controls DFS operation.
Channel switch announcement from other stations on DFS channels will
be interpreted as radar event. These channels will then be marked as
unvailable.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To use DFS in IBSS mode, userspace is required to react to radar events.
It can inform nl80211 that it is capable of doing so by adding a
NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS.
This attribute is supplied to let the kernelspace know that the
userspace application can and will handle radar events, e.g. by
intiating channel switches to a valid channel. DFS channels may
only be used if this attribute is supplied and the driver supports
it. Driver support will be checked even if a channel without DFS
will be initially joined, as a DFS channel may be chosen later.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[fix attribute name in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the driver requests to move to STATIC or DYNAMIC SMPS,
we send an action frame to each associated station and
reconfigure the channel context / driver.
Of course, non-MIMO stations are ignored.
The beacon isn't updated. The association response will
include the original capabilities. Stations that associate
while in non-OFF SMPS mode will get an action frame right
after association to inform them about our current state.
Note that we wait until the end of the EAPOL. Sending an
action frame before the EAPOL is finished can be an issue
for a few clients. Clients aren't likely to send EAPOL
frames in MIMO anyway.
When the SMPS configuration gets more permissive (e.g.
STATIC -> OFF), we don't wake up stations that are asleep
We remember that they don't know about the change and send
the action frame when they wake up.
When the SMPS configuration gets more restrictive (e.g.
OFF -> STATIC), we set the TIM bit for every sleeping STA.
uAPSD stations might send MIMO until they poll the action
frame, but this is for a short period of time.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[fix vht streams loop, initialisation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If skb_header_pointer() fails, we need to assign a verdict, that is
NF_DROP in this case, otherwise, we would leave the verdict from
conn_schedule() uninitialized when returning.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
With the removal of the routing cache, we lost the
option to tweak the garbage collector threshold
along with the maximum routing cache size. So git
commit 703fb94ec ("xfrm: Fix the gc threshold value
for ipv4") moved back to a static threshold.
It turned out that the current threshold before we
start garbage collecting is much to small for some
workloads, so increase it from 1024 to 32768. This
means that we start the garbage collector if we have
more than 32768 dst entries in the system and refuse
new allocations if we are above 65536.
Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Two if statements do the same work, we can merge them to
one. And fix some typos. There is just code simplification,
no functional changes.
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmem_cache_zalloc had set the allocated memory to zero. I think no need
to initialize with 0. And move the comments to the function begin.
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fix some typos
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei reported a performance regression on vxlan, caused
by commit 3347c96029 "ipv4: gso: make inet_gso_segment() stackable"
GSO vxlan packets were not properly segmented, adding IP fragments
while they were not expected.
Rename 'bool tunnel' to 'bool encap', and add a new boolean
to express the fact that UDP should be fragmented.
This fragmentation is triggered by skb->encapsulation being set.
Remove a "skb->encapsulation = 1" added in above commit,
as its not needed, as frags inherit skb->frag from original
GSO skb.
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a socket is freed/reallocated, we need to clear time_next_packet
or else we can inherit a prior value and delay first packets of the
new flow.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch ed08495c3 "tcp: use RTT from SACK for RTO" always re-arms RTO upon
obtaining a RTT sample from newly sacked data.
But technically RTO should only be re-armed when the data sent before
the last (re)transmission of write queue head are (s)acked. Otherwise
the RTO may continue to extend during loss recovery on data sent
in the future.
Note that RTTs from ACK or timestamps do not have this problem, as the RTT
source must be from data sent before.
The new RTO re-arm policy is
1) Always re-arm RTO if SND.UNA is advanced
2) Re-arm RTO if sack RTT is available, provided the sacked data was
sent before the last time write_queue_head was sent.
Signed-off-by: Larry Brakmo <brakmo@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch ed08495c3 "tcp: use RTT from SACK for RTO" has a bug that
it does not check if the ACK acknowledge new data before taking
the RTT sample from TCP timestamps. This patch adds the check
back as required by the RFC.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->lsndtime may not always be the SYNACK timestamp if a passive
Fast Open socket sends data before handshake completes. And if the
remote acknowledges both the data and the SYNACK, the RTT sample
is already taken in tcp_ack(), so no need to call
tcp_update_ack_rtt() in tcp_synack_rtt_meas() aagain.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pekka Pietikäinen reports xt_socket behavioural change after commit
00028aa37098o (netfilter: xt_socket: use IP early demux).
Reason is xt_socket now no longer does an unconditional sk lookup -
it re-uses existing skb->sk if possible, assuming ->sk was set by
ip early demux.
However, when netfilter is invoked via bridge, this can cause 'bogus'
sockets to be examined by the match, e.g. a 'tun' device socket.
bridge netfilter should orphan the skb just like the routing path
before invoking ipv4/ipv6 netfilter hooks to avoid this.
Reported-and-tested-by: Pekka Pietikäinen <pp@ee.oulu.fi>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch removes a duplicate define from
net/netfilter/ipset/ip_set_hash_gen.h
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
At the restructuring of the bitmap types creation in ipset, for the
bitmap:port type wrong (too large) memory allocation was copied
(netfilter bugzilla id #859).
Reported-by: Quentin Armitage <quentin@armitage.org.uk>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
As Bruce points out in RFC 4121, section 4.2.3:
"In Wrap tokens that provide for confidentiality, the first 16 octets
of the Wrap token (the "header", as defined in section 4.2.6), SHALL
be appended to the plaintext data before encryption. Filler octets
MAY be inserted between the plaintext data and the "header.""
...and...
"In Wrap tokens with confidentiality, the EC field SHALL be used to
encode the number of octets in the filler..."
It's possible for the client to stuff different data in that area on a
retransmission, which could make the checksum come out wrong in the DRC
code.
After decrypting the blob, we should trim off any extra count bytes in
addition to the checksum blob.
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
On receiving a packet too big icmp error we check if our current cached
dst_entry in the socket is still valid. This validation check did not
care about the expiration of the (cached) route.
The error path I traced down:
The socket receives a packet too big mtu notification. It still has a
valid dst_entry and thus issues the ip6_rt_pmtu_update on this dst_entry,
setting RTF_EXPIRE and updates the dst.expiration value (which could
fail because of not up-to-date expiration values, see previous patch).
In some seldom cases we race with a) the ip6_fib gc or b) another routing
lookup which would result in a recreation of the cached rt6_info from its
parent non-cached rt6_info. While copying the rt6_info we reinitialize the
metrics store by copying it over from the parent thus invalidating the
just installed pmtu update (both dsts use the same key to the inetpeer
storage). The dst_entry with the just invalidated metrics data would
just get its RTF_EXPIRES flag cleared and would continue to stay valid
for the socket.
We should have not issued the pmtu update on the already expired dst_entry
in the first placed. By checking the expiration on the dst entry and
doing a relookup in case it is out of date we close the race because
we would install a new rt6_info into the fib before we issue the pmtu
update, thus closing this race.
Not reliably updating the dst.expire value was fixed by the patch "ipv6:
reset dst.expires value when clearing expire flag".
Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Reported-by: Valentijn Sessink <valentyn@blub.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Valentijn Sessink <valentyn@blub.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now skb->data is passed to rx_hook() even if the skb
has not been linearised and without giving rx_hook() a way
to linearise it.
Change the rx_hook() interface and make it accept the skb
and the offset to the UDP payload as arguments. rx_hook() is
also renamed to rx_skb_hook() to ensure that out of the tree
users notice the API change.
In this way any rx_skb_hook() implementation can perform all
the needed operations to properly (and safely) access the
skb data.
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We also can defer the initialization of hashrnd in flow_dissector
to its first use. Since net_get_random_once is irq safe now we don't
have to audit the call paths if one of this functions get called by an
interrupt handler.
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I initial build non irq safe version of net_get_random_once because I
would liked to have the freedom to defer even the extraction process of
get_random_bytes until the nonblocking pool is fully seeded.
I don't think this is a good idea anymore and thus this patch makes
net_get_random_once irq safe. Now someone using net_get_random_once does
not need to care from where it is called.
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I think that a dev_put() is needed in the error path to preserve the
proper dev refcount.
CC: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The transition from markov state "3 => lost packets within a burst
period" to "1 => successfully transmitted packets within a gap period"
has no *additional* loss event. The loss already happen for transition
from 1 -> 3, this additional loss will make things go wild.
E.g. transition probabilities:
p13: 10%
p31: 100%
Expected:
Ploss = p13 / (p13 + p31)
Ploss = ~9.09%
... but it isn't. Even worse: we get a double loss - each time.
So simple don't return true to indicate loss, rather break and return
false.
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Stefano Salsano <stefano.salsano@uniroma2.it>
Cc: Fabio Ludovici <fabio.ludovici@yahoo.it>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
- data structure reshaping to accommodate multiple routing protocol
implementations
- routing protocol API enhancement
- send to userspace the event "batman-adv Gateway loss" in case of soft-iface
destruction and a "batman-adv Gateway" was configured
- improve the TT component to support and advertise runtime flag changes
- minor code refactoring
- make the ICMP kernel-to-userspace communication more generic
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=sYKR
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Antonio Quartulli says:
====================
this is another set of changes intended for net-next/linux-3.13.
(probably our last pull request for this cycle)
Patches 1 and 2 reshape two of our main data structures in a way that they can
easily be extended in the future to accommodate new routing protocols.
Patches from 3 to 9 improve our routing protocol API and its users so that all
the protocol-related code is not mixed up with the other components anymore.
Patch 10 limits the local Translation Table maximum size to a value such that it
can be fully transfered over the air if needed. This value depends on
fragmentation being enabled or not and on the mtu values.
Patch 11 makes batman-adv send a uevent in case of soft-interface destruction
while a "bat-Gateway" was configured (this informs userspace about the GW not
being available anymore).
Patches 13 and 14 enable the TT component to detect non-mesh client flag
changes at runtime (till now those flags where set upon client detection and
were not changed anymore).
Patch 16 is a generalisation of our user-to-kernel space communication (and
viceversa) used to exchange ICMP packets to send/received to/from the mesh
network. Now it can easily accommodate new ICMP packet types without breaking
the existing userspace API anymore.
Remaining patches are minor changes and cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All fragmentation hash secrets now get initialized by their
corresponding hash function with net_get_random_once. Thus we can
eliminate the initial seeding.
Also provide a comment that hash secret seeding happens at the first
call to the corresponding hashing function.
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Defer the fragmentation hash secret initialization for IPv6 like the
previous patch did for IPv4.
Because the netfilter logic reuses the hash secret we have to split it
first. Thus introduce a new nf_hash_frag function which takes care to
seed the hash secret.
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Defer the generation of the first hash secret for the ipv4 fragmentation
cache as late as possible.
ip4_frags.rnd gets initial seeded by inet_frags_init and regulary
reseeded by inet_frag_secret_rebuild. Either we call ipqhashfn directly
from ip_fragment.c in which case we initialize the secret directly.
If we first get called by inet_frag_secret_rebuild we install a new secret
by a manual call to get_random_bytes. This secret will be overwritten
as soon as the first call to ipqhashfn happens. This is safe because we
won't race while publishing the new secrets with anyone else.
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8a07eb0a50 ("sctp: Add ASCONF operation on the single-homed host")
implemented possible use of IPv4 addresses with non SCTP_ADDR_SRC state
as source address when sending ASCONF (ADD) packets, but IPv6 part for
that was not implemented in 8a07eb0a50. Therefore, as this is not restricted
to IPv4-only, fix this up to allow the same for IPv6 addresses in SCTP.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Michio Honda <micchie@sfc.wide.ad.jp>
Acked-by: Michio Honda <micchie@sfc.wide.ad.jp>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
The following patchset contains three netfilter fixes for your net
tree, they are:
* A couple of fixes to resolve info leak to userspace due to uninitialized
memory area in ulogd, from Mathias Krause.
* Fix instruction ordering issues that may lead to the access of
uninitialized data in x_tables. The problem involves the table update
(producer) and the main packet matching (consumer) routines. Detected in
SMP ARMv7, from Will Deacon.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/usb/qmi_wwan.c
include/net/dst.h
Trivial merge conflicts, both were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently net_secret_init does not get inlined, so we always have a call
to net_secret_init even in the fast path.
Let's specify net_secret_init as __always_inline so we have the nop in
the fast-path without the call to net_secret_init and the unlikely path
at the epilogue of the function.
jump_labels handle the inlining correctly.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of handling icmp packets only up to length of icmp_packet_rr,
the code should handle any icmp length size. Therefore the length
truncating is moved to when the packet is actually sent to userspace
(this does not support lengths longer than icmp_packet_rr yet). Longer
packets are forwarded without truncating.
This patch also cleans up some parts where the icmp header struct could
be used instead of other icmp_packet(_rr) structs to make the code more
readable.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Flags covered by TT_SYNC_MASK are kept in sync among the
nodes in the network and therefore they have to be
considered while computing the global/local table CRC.
In this way a generic originator is able to understand if
its table contains the correct flags or not.
Bits from 4 to 7 in the TT flags fields are now reserved for
"synchronized" flags only.
This allows future developers to add more flags of this type
without breaking compatibility.
It's important to note that not all the remote TT flags are
synchronised. This comes from the fact that some flags are
used to inject an information once only.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Some flags (i.e. the WIFI flag) may change after that the
related client has already been announced. However it is
useful to informa the rest of the network about this change.
Add a runtime-flag-switch detection mechanism and
re-announce the related TT entry to advertise the new flag
value.
This mechanism can be easily exploited by future flags that
may need the same treatment.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Upcoming changes need to perform other checks on the
incoming net_device struct.
To avoid performing dev_get_by_index() for each and every
check, it is better to move it outside of is_wifi_iface()
and search the netdev object once only.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
In case of soft_iface destruction send a GW DEL event to
userspace so that applications which are listening for GW
events are informed about the lost of connectivity and can
react accordingly.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
The local translation table size is limited by what can be
transferred from one node to another via a full table request.
The number of entries fitting into a full table request depend
on whether the fragmentation is enabled or not. Therefore this
patch introduces a max table size check and refuses to add
more local clients when that size is reached. Moreover, if the
max full table packet size changes (MTU change or fragmentation
is disabled) the local table is downsized instantaneously.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Some operations executed on an orig_node depends on the
current routing algorithm being used. To easily make this
mechanism routing algorithm agnostic add a orig_node
specific API that each algorithm can populate with its own
routines.
Such routines are then invoked by the code when needed,
without knowing which routing algorithm is currently in use
With this patch 3 API functions are added:
- orig_free (to free routing depending internal structs)
- orig_add_if (to change the inner state of an orig_node
when a new hard interface is added)
- orig_del_if (to change the inner state of an orig_node
when an hard interface is removed)
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Each routing protocol has its own metric semantic and
therefore is the protocol itself the only component able to
compare two metrics to check their "similarity".
This new API allows each routing protocol to implement its
own logic and make the external code protocol agnostic.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
This new API allows to compare the two neighbours based on
the metric avoiding the user to deal with any routing
algorithm specific detail
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Each routing protocol has its own metric and private
variables, therefore it is useful to introduce a new API
for originator information printing.
This API needs to be implemented by each protocol in order
to provide its specific originator table output.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
some of the struct batadv_orig_node members are B.A.T.M.A.N. IV
specific and therefore they are moved in a algorithm specific
substruct in order to make batadv_orig_node routing algorithm
agnostic
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
some of the fields in struct batadv_neigh_node are strictly
related to the B.A.T.M.A.N. IV algorithm. In order to
make the struct usable by any routing algorithm it has to be
split and made more generic
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Don't verify checksum for outgoing packets because checksum calculation
may be done by the device.
Without this patch:
$ ip6tables -I OUTPUT -p tcp --dport 80 -j REJECT --reject-with tcp-reset
$ time telnet ipv6.google.com 80
Trying 2a00:1450:4010:c03::67...
telnet: Unable to connect to remote host: Connection timed out
real 0m7.201s
user 0m0.000s
sys 0m0.000s
With the patch applied:
$ ip6tables -I OUTPUT -p tcp --dport 80 -j REJECT --reject-with tcp-reset
$ time telnet ipv6.google.com 80
Trying 2a00:1450:4010:c03::67...
telnet: Unable to connect to remote host: Connection refused
real 0m0.085s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
While this commit was a good attempt to fix issues occuring when no
multicast querier is present, this commit still has two more issues:
1) There are cases where mdb entries do not expire even if there is a
querier present. The bridge will unnecessarily continue flooding
multicast packets on the according ports.
2) Never removing an mdb entry could be exploited for a Denial of
Service by an attacker on the local link, slowly, but steadily eating up
all memory.
Actually, this commit became obsolete with
"bridge: disable snooping if there is no querier" (b00589af3b)
which included fixes for a few more cases.
Therefore reverting the following commits (the commit stated in the
commit message plus three of its follow up fixes):
====================
Revert "bridge: update mdb expiration timer upon reports."
This reverts commit f144febd93.
Revert "bridge: do not call setup_timer() multiple times"
This reverts commit 1faabf2aab.
Revert "bridge: fix some kernel warning in multicast timer"
This reverts commit c7e8e8a8f7.
Revert "bridge: only expire the mdb entry when query is received"
This reverts commit 9f00b2e7cf.
====================
CC: Cong Wang <amwang@redhat.com>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Reviewed-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
What sk_reset_txq() does is just calls function sk_tx_queue_reset(),
and sk_reset_txq() is used only in sock.h, by dst_negative_advice().
Let dst_negative_advice() calls sk_tx_queue_reset() directly so we
can remove unneeded sk_reset_txq().
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Collect mega flow mask stats. ovs-dpctl show command can be used to
display them for debugging and performance tuning.
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
The unnamed union should be possible to be initialized directly, but
unfortunately it's not so:
/usr/src/ipset/kernel/net/netfilter/ipset/ip_set_hash_netnet.c: In
function ?hash_netnet4_kadt?:
/usr/src/ipset/kernel/net/netfilter/ipset/ip_set_hash_netnet.c:141:
error: unknown field ?cidr? specified in initializer
Reported-by: Husnu Demir <hdemir@metu.edu.tr>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of cb->data, use callback dump args only and introduce symbolic
names instead of plain numbers at accessing the argument members.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
During kernel stability testing on an SMP ARMv7 system, Yalin Wang
reported the following panic from the netfilter code:
1fe0: 0000001c 5e2d3b10 4007e779 4009e110 60000010 00000032 ff565656 ff545454
[<c06c48dc>] (ipt_do_table+0x448/0x584) from [<c0655ef0>] (nf_iterate+0x48/0x7c)
[<c0655ef0>] (nf_iterate+0x48/0x7c) from [<c0655f7c>] (nf_hook_slow+0x58/0x104)
[<c0655f7c>] (nf_hook_slow+0x58/0x104) from [<c0683bbc>] (ip_local_deliver+0x88/0xa8)
[<c0683bbc>] (ip_local_deliver+0x88/0xa8) from [<c0683718>] (ip_rcv_finish+0x418/0x43c)
[<c0683718>] (ip_rcv_finish+0x418/0x43c) from [<c062b1c4>] (__netif_receive_skb+0x4cc/0x598)
[<c062b1c4>] (__netif_receive_skb+0x4cc/0x598) from [<c062b314>] (process_backlog+0x84/0x158)
[<c062b314>] (process_backlog+0x84/0x158) from [<c062de84>] (net_rx_action+0x70/0x1dc)
[<c062de84>] (net_rx_action+0x70/0x1dc) from [<c0088230>] (__do_softirq+0x11c/0x27c)
[<c0088230>] (__do_softirq+0x11c/0x27c) from [<c008857c>] (do_softirq+0x44/0x50)
[<c008857c>] (do_softirq+0x44/0x50) from [<c0088614>] (local_bh_enable_ip+0x8c/0xd0)
[<c0088614>] (local_bh_enable_ip+0x8c/0xd0) from [<c06b0330>] (inet_stream_connect+0x164/0x298)
[<c06b0330>] (inet_stream_connect+0x164/0x298) from [<c061d68c>] (sys_connect+0x88/0xc8)
[<c061d68c>] (sys_connect+0x88/0xc8) from [<c000e340>] (ret_fast_syscall+0x0/0x30)
Code: 2a000021 e59d2028 e59de01c e59f011c (e7824103)
---[ end trace da227214a82491bd ]---
Kernel panic - not syncing: Fatal exception in interrupt
This comes about because CPU1 is executing xt_replace_table in response
to a setsockopt syscall, resulting in:
ret = xt_jumpstack_alloc(newinfo);
--> newinfo->jumpstack = kzalloc(size, GFP_KERNEL);
[...]
table->private = newinfo;
newinfo->initial_entries = private->initial_entries;
Meanwhile, CPU0 is handling the network receive path and ends up in
ipt_do_table, resulting in:
private = table->private;
[...]
jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
On weakly ordered memory architectures, the writes to table->private
and newinfo->jumpstack from CPU1 can be observed out of order by CPU0.
Furthermore, on architectures which don't respect ordering of address
dependencies (i.e. Alpha), the reads from CPU0 can also be re-ordered.
This patch adds an smp_wmb() before the assignment to table->private
(which is essentially publishing newinfo) to ensure that all writes to
newinfo will be observed before plugging it into the table structure.
A dependent-read barrier is also added on the consumer sides, to ensure
the same ordering requirements are also respected there.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: Wang, Yalin <Yalin.Wang@sonymobile.com>
Tested-by: Wang, Yalin <Yalin.Wang@sonymobile.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For passive TCP connections, upon receiving the ACK that completes the
3WHS, make sure we set our pacing rate after we get our first RTT
sample.
On passive TCP connections, when we receive the ACK completing the
3WHS we do not take an RTT sample in tcp_ack(), but rather in
tcp_synack_rtt_meas(). So upon receiving the ACK that completes the
3WHS, tcp_ack() leaves sk_pacing_rate at its initial value.
Originally the initial sk_pacing_rate value was 0, so passive-side
connections defaulted to sysctl_tcp_min_tso_segs (2 segs) in skbuffs
made in the first RTT. With a default initial cwnd of 10 packets, this
happened to be correct for RTTs 5ms or bigger, so it was hard to
see problems in WAN or emulated WAN testing.
Since 7eec4174ff ("pkt_sched: fq: fix non TCP flows pacing"), the
initial sk_pacing_rate is 0xffffffff. So after that change, passive
TCP connections were keeping this value (and using large numbers of
segments per skbuff) until receiving an ACK for data.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Routes need to be probed asynchronous otherwise the call stack gets
exhausted when the kernel attemps to deliver another skb inline, like
e.g. xt_TEE does, and we probe at the same time.
We update neigh->updated still at once, otherwise we would send to
many probes.
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now ipv6_gso_segment() is stackable, its relatively easy to
implement GSO/TSO support for SIT tunnels
Performance results, when segmentation is done after tunnel
device (as no NIC is yet enabled for TSO SIT support) :
Before patch :
lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877
After patch :
lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support GSO on SIT tunnels, we need to make
inet_gso_segment() stackable.
It should not assume network header starts right after mac
header.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow unprivileged users to use:
/proc/sys/net/ipv4/icmp_echo_ignore_all
/proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
/proc/sys/net/ipv4/icmp_ignore_bogus_error_response
/proc/sys/net/ipv4/icmp_errors_use_inbound_ifaddr
/proc/sys/net/ipv4/icmp_ratelimit
/proc/sys/net/ipv4/icmp_ratemask
/proc/sys/net/ipv4/ping_group_range
/proc/sys/net/ipv4/tcp_ecn
/proc/sys/net/ipv4/ip_local_ports_range
These are occassionally handy and after a quick review I don't see
any problems with unprivileged users using them.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify maintenance of ipv4_net_table by using math to point the per
net sysctls into the appropriate struct net, instead of manually
reassinging all of the variables into hard coded table slots.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the pointers in struct cg_proto with actual data fields and kill
struct tcp_memcontrol as it is not fully redundant.
This removes a confusing, unnecessary layer of abstraction.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code that is implemented is per memory cgroup not per netns, and
having per netns bits is just confusing. Remove the per netns bits to
make it easier to see what is really going on.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code is broken and does not constrain sysctl_tcp_mem as
tcp_update_limit does. With the result that it allows the cgroup tcp
memory limits to be bypassed.
The semantics are broken as the settings are not per netns and are in a
per netns table, and instead looks at current.
Since the code is broken in both design and implementation and does not
implement the functionality for which it was written remove it.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is never called. Remove it.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when rt6_nexthop() can return nexthop address we can use it
for proper nexthop comparison of directly connected destinations.
For more information refer to commit bbb5823cf7
("netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper").
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure rt6i_gateway contains nexthop information in
all routes returned from lookup or when routes are directly
attached to skb for generated ICMP packets.
The effect of this patch should be a faster version of
rt6_nexthop() and the consideration of local addresses as
nexthop.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no access to chan->sk in L2CAP core now. This change marks the
end of the task of splitting L2CAP between Core and Socket, thus sk is now
gone from struct l2cap_chan.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Instead of accessing skb->sk in L2CAP core we now compare the channel
a skb belongs to and not send it back if the channel is same. This change
removes another struct socket usage from L2CAP core.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Adding the channel to the skb private data makes possible to us know which
channel the skb we have came from.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The parent socket is not used inside the L2CAP core anymore. We only lock
it to indirect access through the new_connection() callback. The hold of
the socket lock was moved to the new_connection() callback.
Inside L2CAP core the channel lock is now used in l2cap_le_conn_ready()
and l2cap_conn_ready() to protect the execution of these two functions
during the handling of new incoming connections.
This change remove the socket lock usage from L2CAP core while keeping
the code safe against race conditions.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This simplify and make safer the state change handling inside l2cap_core.c.
we got rid of __l2cap_state_change(). And l2cap_state_change() doesn't lock
the socket anymore, instead the socket is locked inside the ops callback for
state change in l2cap_sock.c.
It makes the code safer because in some we were using a unlocked version,
and now we are calls to l2cap_state_change(), when dealing with sockets, use
the locked version.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In both places that we use the defer callback the socket lock is held for
a indirect sk access inside __l2cap_change_state() and chan->ops->defer(),
all the rest of the code between lock_sock() and release_sock() is
already protected by the channel lock and won't be affected by this
change.
We now use l2cap_change_state(), the locked version of the change state
function, and the defer callback does the locking itself now. This does
not affect other uses of the defer callback.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In the process of removing socket usage from L2CAP we now access the L2CAP
socket from the data member of struct l2cap_chan. For the L2CAP socket
user the data member points to the L2CAP socket.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It is a leftover from the recent effort of remove sk usage from L2CAP
core.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The current "fast connectable" feature is BR/EDR-only, so add a proper
check for BR/EDR support before proceeding with the associated HCI
commands.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The timestamp wasn't updated after transitioning
to the NL80211_DFS_USABLE state after NOP time.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The timeout was not properly converted from msecs
to jiffies. As a result channel transition to
NL80211_DFS_USABLE was delayed depending on
CONFIG_HZ configuration, e.g. HZ=100 would delay
the NOP from 30 minutes to 300 minutes.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since rdev->sched_scan_req is dereferenced outside the
lock protecting it, this might be done at the wrong
time, causing crashes. Move the dereference to where
it should be - inside the RTNL locked section.
Cc: stable@vger.kernel.org [3.8+]
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It does not make sense to queue retransmitted packets if the
original packet is still in some queue of this host. So add
a check to xdst_queue_output() and drop the packet if the
original packet is not yet sent.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Eric Dumazet <edumazet@google.com>
scratches are per cpu, we can use vmalloc_node() for proper
NUMA affinity.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch updates the Set Discoverable management command to also be
applicable for LE. In particular this affects the advertising flags
where we can say "general discoverable" or "limited discoverable".
Since the device flags may not be up-to-date when the advertising data
is written this patch introduces a get_adv_discov_flags() helper
function which also looks at any pending mgmt commands (a pending
set_discoverable would be the exception when the flags are not yet
correct).
The patch also adds HCI_DISCOVERABLE flag clearing to the
mgmt_discoverable_timeout function, since the code was previously
relying on the mgmt_discoverable callback to handle this, which is only
called for the BR/EDR-only HCI_Write_Scan_Enable command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We'll soon be introducing also LE support for the Set Discoverable
management command, so move the HCI_LIMITED_DISCOVERABLE flag clearing
and setting out from the if-branch that is only used for a BR/EDR
specific HCI command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We should only send the HCI_Write_Scan_Enable command from
mgmt_set_powered_failed() when BR/EDR support is enabled. This is
particularly important when the discoverable setting is also tied to LE.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We will soon need this function for updating the advertising data, so
move it higher up in mgmt.c to avoid a forward declaration.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It is possible that the Set Connectable management command doesn't cause
any HCI commands to send (such as when BR/EDR is disabled). We can't
just send a response to user space in this case but must also update the
necessary device flags and settings. This patch fixes the issue by using
the recently introduced set_connectable_update_settings function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We will need to directly update the device flags and notify user space
of the new settings not just when we're powered off but also if it turns
out that there are no HCI commands to send (which can happen in
particular when BR/EDR is disabled). Since this is a considerable amount
of code, refactor it to a separate function so it can be reused for the
"no HCI commands to send" case.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We shouldn't be sending the HCI_Write_Class_Of_Device command when
BR/EDR is disabled since this is a BR/EDR-only command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It's better to check for the device flag instead of device features so
that we avoid unnecessary HCI commands when the feature is supported but
disabled (i.e. the flag is unset).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It's better to check for the device flag instead of device features so
that we avoid unnecessary HCI commands when the feature is supported but
disabled (i.e. the flag is unset).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
- email addresses update in documentation, source files and MAINTAINERS
- make the TT component distinguish non-mesh clients based on the VLAN they
belong to
- improve all the internal components to properly work on a per-VLAN basis
(enabled by the new TT-VLAN feature)
- enhance the sysfs interface in order to provide behaviour switches on a
per-VLAN basis (enabled by the new TT-VLAN feature)
- improve TT lock mechanism
- improve unicast transmission APIs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=sEEg
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Antonio Quartulli says:
====================
this is another batch intended for net-next/linux-3.13.
This pull request is a bit bigger than usual, but 6 patches are very small
(three of them are about email updates)..
Patch 1 is fixing a previous merge conflict resolution that went wrong
(I realised that only now while checking other patches..).
Patches from 2 to 4 that are updating our emails in all the proper files
(Documentation/, headers and MAINTAINERS).
Patches 5, 6 and 7 are bringing a big improvement to the TranslationTable
component: it is now able to group non-mesh clients based on the VLAN they
belong to. In this way a lot a new enhancements are now possible thanks to the
fact that each batman-adv behaviour can be applied on a per VLAN basis.
And, of course, in patches from 8 to 12 you have some of the enhancements I was
talking about:
- make the batman-Gateway selection VLAN dependent
- make DAT (Distributed ARP Table) group ARP entries on a VLAN basis (this
allows DAT to work even when the admin decided to use the same IP subnet on
different VLANs)
- make the AP-Isolation behaviour switchable on each VLAN independently
- export VLAN specific attributes via sysfs. Switches like the AP-Isolation are
now exported once per VLAN (backward compatibility of the sysfs interface has
been preserved)
Patches 13 and 14 are small code cleanups.
Patch 15 is a minor improvement in the TT locking mechanism.
Patches 16 and 17 are other enhancements to the TT component. Those allow a
node to parse a "non-mesh client announcement message" and accept only those
TT entries belonging to certain VLANs.
Patch 18 exploits this parse&accept mechanism to make the Bridge Loop Avoidance
component reject only TT entries connected to the VLAN where it is operating.
Previous to this change, BLA was rejecting all the entries coming from any other
Backbone node, regardless of the VLAN (for more details about how the Bridge
Loop Avoidance works please check [1]).
[1] http://www.open-mesh.org/projects/batman-adv/wiki/Bridge-loop-avoidance-II
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changed key initialization of tcp_fastopen cookies to net_get_random_once.
If the user sets a custom key net_get_random_once must be called at
least once to ensure we don't overwrite the user provided key when the
first cookie is generated later on.
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize the ehash and ipv6_hash_secrets with net_get_random_once.
Each compilation unit gets its own secret now:
ipv4/inet_hashtables.o
ipv4/udp.o
ipv6/inet6_hashtables.o
ipv6/udp.o
rds/connection.o
The functions still get inlined into the hashing functions. In the fast
path we have at most two (needed in ipv6) if (unlikely(...)).
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch splits the secret key for syncookies for ipv4 and ipv6 and
initializes them with net_get_random_once. This change was the reason I
did this series. I think the initialization of the syncookie_secret is
way to early.
Cc: Florian Westphal <fw@strlen.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
net_get_random_once is a new macro which handles the initialization
of secret keys. It is possible to call it in the fast path. Only the
initialization depends on the spinlock and is rather slow. Otherwise
it should get used just before the key is used to delay the entropy
extration as late as possible to get better randomness. It returns true
if the key got initialized.
The usage of static_keys for net_get_random_once is a bit uncommon so
it needs some further explanation why this actually works:
=== In the simple non-HAVE_JUMP_LABEL case we actually have ===
no constrains to use static_key_(true|false) on keys initialized with
STATIC_KEY_INIT_(FALSE|TRUE). So this path just expands in favor of
the likely case that the initialization is already done. The key is
initialized like this:
___done_key = { .enabled = ATOMIC_INIT(0) }
The check
if (!static_key_true(&___done_key)) \
expands into (pseudo code)
if (!likely(___done_key > 0))
, so we take the fast path as soon as ___done_key is increased from the
helper function.
=== If HAVE_JUMP_LABELs are available this depends ===
on patching of jumps into the prepared NOPs, which is done in
jump_label_init at boot-up time (from start_kernel). It is forbidden
and dangerous to use net_get_random_once in functions which are called
before that!
At compilation time NOPs are generated at the call sites of
net_get_random_once. E.g. net/ipv6/inet6_hashtable.c:inet6_ehashfn (we
need to call net_get_random_once two times in inet6_ehashfn, so two NOPs):
71: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
76: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
Both will be patched to the actual jumps to the end of the function to
call __net_get_random_once at boot time as explained above.
arch_static_branch is optimized and inlined for false as return value and
actually also returns false in case the NOP is placed in the instruction
stream. So in the fast case we get a "return false". But because we
initialize ___done_key with (enabled != (entries & 1)) this call-site
will get patched up at boot thus returning true. The final check looks
like this:
if (!static_key_true(&___done_key)) \
___ret = __net_get_random_once(buf, \
expands to
if (!!static_key_false(&___done_key)) \
___ret = __net_get_random_once(buf, \
So we get true at boot time and as soon as static_key_slow_inc is called
on the key it will invert the logic and return false for the fast path.
static_key_slow_inc will change the branch because it got initialized
with .enabled == 0. After static_key_slow_inc is called on the key the
branch is replaced with a nop again.
=== Misc: ===
The helper defers the increment into a workqueue so we don't
have problems calling this code from atomic sections. A seperate boolean
(___done) guards the case where we enter net_get_random_once again before
the increment happend.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch splits the inet6_ehashfn into separate ones in
ipv6/inet6_hashtables.o and ipv6/udp.o to ease the introduction of
seperate secrets keys later.
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This duplicates a bit of code but let's us easily introduce
separate secret keys later. The separate compilation units are
ipv4/inet_hashtabbles.o, ipv4/udp.o and rds/connection.o.
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now inet_gso_segment() is stackable, its relatively easy to
implement GSO/TSO support for IPIP
Performance results, when segmentation is done after tunnel
device (as no NIC is yet enabled for TSO IPIP support) :
Before patch :
lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
87380 16384 16384 10.00 3357.88 5.09 3.70 2.983 2.167
After patch :
lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
87380 16384 16384 10.00 7710.19 4.52 6.62 1.152 1.687
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support GSO on IPIP, we need to make
inet_gso_segment() stackable.
It should not assume network header starts right after mac
header.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes gre_handle_offloads() more generic
and rename it to iptunnel_handle_offloads()
This will be used to add GSO/TSO support to IPIP tunnels.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While implementing GSO/TSO support for IPIP, I found skb_segment()
was assuming network header was immediately following mac header.
Its not really true in the case inet_gso_segment() is stacked :
By the time tcp_gso_segment() is called, network header points
to the inner IP header.
Let's instead assume nothing and pick the current offsets found in
original skb, we have skb_headers_offset_update() helper for that.
Also move the csum_start update inside skb_headers_offset_update()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, if user application does:
sendto len<mtu flag MSG_MORE
sendto len>mtu flag 0
The skb is not treated as fragmented one because it is not initialized
that way. So move the initialization to fix this.
introduced by:
commit e89e9cf539 "[IPv4/IPv6]: UFO Scatter-gather approach"
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, if user application does:
sendto len<mtu flag MSG_MORE
sendto len>mtu flag 0
The skb is not treated as fragmented one because it is not initialized
that way. So move the initialization to fix this.
introduced by:
commit e89e9cf539 "[IPv4/IPv6]: UFO Scatter-gather approach"
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
if up->pending != 0 dontfrag is left with default value -1. That
causes that application that do:
sendto len>mtu flag MSG_MORE
sendto len>mtu flag 0
will receive EMSGSIZE errno as the result of the second sendto.
This patch fixes it by respecting IPV6_DONTFRAG socket option.
introduced by:
commit 4b340ae20d "IPv6: Complete IPV6_DONTFRAG support"
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6_gso_send_check() and ipv6_gso_segment() are called by
skb_mac_gso_segment() under rcu lock, no need to use
rcu_read_lock() / rcu_read_unlock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet_gso_segment() and inet_gso_send_check() are called by
skb_mac_gso_segment() under rcu lock, no need to use
rcu_read_lock() / rcu_read_unlock()
Avoid calling ip_hdr() twice per function.
We can use ip_send_check() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of credentials passing in unix stream sockets (dgram
sockets seem not affected), we get a rather sparse race after
commit 16e5726 ("af_unix: dont send SCM_CREDENTIALS by default").
We have a stream server on receiver side that requests credential
passing from senders (e.g. nc -U). Since we need to set SO_PASSCRED
on each spawned/accepted socket on server side to 1 first (as it's
not inherited), it can happen that in the time between accept() and
setsockopt() we get interrupted, the sender is being scheduled and
continues with passing data to our receiver. At that time SO_PASSCRED
is neither set on sender nor receiver side, hence in cmsg's
SCM_CREDENTIALS we get eventually pid:0, uid:65534, gid:65534
(== overflow{u,g}id) instead of what we actually would like to see.
On the sender side, here nc -U, the tests in maybe_add_creds()
invoked through unix_stream_sendmsg() would fail, as at that exact
time, as mentioned, the sender has neither SO_PASSCRED on his side
nor sees it on the server side, and we have a valid 'other' socket
in place. Thus, sender believes it would just look like a normal
connection, not needing/requesting SO_PASSCRED at that time.
As reverting 16e5726 would not be an option due to the significant
performance regression reported when having creds always passed,
one way/trade-off to prevent that would be to set SO_PASSCRED on
the listener socket and allow inheriting these flags to the spawned
socket on server side in accept(). It seems also logical to do so
if we'd tell the listener socket to pass those flags onwards, and
would fix the race.
Before, strace:
recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"blub\n", 4096}],
msg_controllen=32, {cmsg_len=28, cmsg_level=SOL_SOCKET,
cmsg_type=SCM_CREDENTIALS{pid=0, uid=65534, gid=65534}},
msg_flags=0}, 0) = 5
After, strace:
recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"blub\n", 4096}],
msg_controllen=32, {cmsg_len=28, cmsg_level=SOL_SOCKET,
cmsg_type=SCM_CREDENTIALS{pid=11580, uid=1000, gid=1000}},
msg_flags=0}, 0) = 5
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The backbone gw check has to be VLAN specific so that code
using it can specify VID where the check has to be done.
In the TT code, the check has been moved into the
tt_global_add() function so that it can be performed on a
per-entry basis instead of ignoring all the TT data received
from another backbone node. Only TT global entries belonging
to the VLAN where the backbone node is connected to are
skipped.
All the other spots where the TT code was checking whether a
node is a backbone have been removed.
Moreover, batadv_bla_is_backbone_gw_orig() now returns bool
since it used to return only 1 or 0.
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Instead of unconditionally removing all the TT entries
served by a given originator, make tt_global_orig_del()
remove only entries matching a given VLAN identifier
provided as argument.
If such argument is negative all the global entries
served by the originator are removed.
This change is used into the BLA code to purge entries
served by a newly discovered Backbone node, but limiting
the operation only to those connected to the VLAN where the
backbone has been discovered.
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
This change allows nodes to handle the TT table on a
per-VLAN basis. This is needed because nodes may have to
store only some of the global entries advertised by another
node.
In this scenario such nodes would re-create only a partial
global table and would not be able to compute a correct CRC
anymore.
This patch splits the logic and introduces one CRC per VLAN.
In this way a node fetching only some entries belonging to
some VLANs is still able to compute the needed CRCs and
still check the table correctness.
With this patch the shape of the TVLV-TT is changed too
because now a node needs to advertise all the CRCs of all
the VLANs that it is wired to.
The debug output of the local Translation Table now shows
the CRC along with each entry since there is not a common
value for the entire table anymore.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
A few variable assignments ended up with missing a space between the
variable and equal sign.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The uuid entry struct is used for the UUID byte stream. That is
actually the wrong value. The correct value is uuid->uuid.
Besides fixing this up, use the %pUb modifier to print the UUID
string. However since the UUID is stored in big endian with
reversed byte order, change the byte order before printing.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Device Under Test (DUT) mode is useful for doing certification
testing and so expose this as debugfs option.
This mode is actually special since you can only enter it. Restoring
normal operation means that a HCI Reset is required. The current mode
value gets tracked as a new device flag and when disabling it, the
correct command to reset the controller is sent.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For testing purposes expose the default LE connection interval values
via debugfs.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabling and disabling SSP debug mode is useful for development. This
adds a debugfs entry that allows to configure the SSP debug mode.
On purpose this has been implemented as debugfs entry and not a public
API since it is really only useful during testing and development.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A TT response may be prepared and sent while the local or
global translation table is getting updated.
The worst case is when one of the tables is accessed after
its content has been recently updated but the metadata
(TTVN/CRC) has not yet. In this case the reader will get a
table content which does not match the TTVN/CRC.
This will lead to an inconsistent state and so to a TT
recovery.
To avoid entering this situation, put a lock around those TT
operations recomputing the metadata and around the TT
Response creation (the latter is the only reader that
accesses the metadata together with the table).
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
this comment refers to the old batmand codebase and does
not make sense anymore. Remove it
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
With this patch the functions batadv_send_skb_unicast() and
batadv_send_skb_unicast_4addr() are further refined into
batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and
batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send
a packet in the unicast forwarding methods and let the callers decide.
This is going to be useful for the upcoming multicast related patches in
particular.
Further, the return values were polished a little to use the more
appropriate NET_XMIT_* defines.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
AP isolation has to be enabled on one VLAN interface only.
This patch moves the AP isolation attribute to the per-vlan
interface attribute set, enabling it to have a different
value depending on the selected vlan.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Each VLAN can now have its own set of attributes which are
exported through a new subfolder in the sysfs tree.
Each VLAN created on top of a soft_iface will have its own
subfolder.
The subfolder is named "vlan%VID" and it is created inside
the "mesh" sysfs folder belonging to batman-adv.
Attributes corresponding to the untagged LAN are stored in
the root sysfs folder as before.
This patch also creates all the needed macros and data
structures to easily handle new VLAN spacific attributes.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Since batman-adv is now fully VLAN-aware, a proper framework
able to handle per-vlan-interface attributes is needed.
Those attributes will affect the associated VLAN interface
only, rather than the real soft_iface (which would result
in every vlan interface having the same attribute
configuration).
To make the code simpler and easier to extend, attributes
associated to the standalone soft_iface are now treated
like belonging to yet another vlan having a special vid.
This vid is different from the others because it is made up
by all zeros and the VLAN_HAS_TAG bit is not set.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
The same IP subnet can be used on different VLANs, therefore
DAT has to differentiate whether the IP to resolve belongs
to one or the other virtual LAN.
To accomplish this task DAT has to deal with the VLAN tag
and store it together with each ARP entry.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
The gateway code is now adapted in order to correctly
interact with the Translation Table component by using the
vlan ID
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
The conn->interval parameter of HCI connections is not used at all
and so just remove it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For LE capable controllers at the special LE features page to the
debugfs list with all the other features pages.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The system can be figured to accept and use debug keys. Expose this
value in debugfs for debugging purposes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For some testing it is important to know the current own addres type,
but also be able to change it. The change is lost over powery cycles
and only intended for debugging.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The own address type is based on the fact if the controller has
a public address or not. This means that this detail can be just
configured once during setup phase.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For debugging purposes expose the current list of long term keys
via debugfs. This file is read-only and limited to root access.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Knowing the white list size information is important for
debugging. So export it via debugfs.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus information are exposed in the actual hierarchy and should
not be exposed as attribute.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For debugging purposes expose the current list of link keys via
debugfs. This file is read-only and limited to root access.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The class of device debugfs information should be directly exported
from hci_core.c and so move them over there.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The local version information from the controller can not change
since they are static. So store them only once during setup
phase and not bother overwriting them every time this command
gets executed.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the debugfs entries for manufacturer, hci_ver and hci_rev into
hci_core.c and use the new helpers for static entries that will not
change at runtime. Once passed the setup procedure, they will stay
fixed.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The debug entry for connection features is incomplete and also does
not work with AMP controllers and physical links. So just remove it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some controllers list the max_page value from the extended features
response as 0 when SSP has not yet been enabled. To workaround this
issue, force the max_page value to 1 when SSP support has been
detected.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the handling of HCI device features debugfs into hci_core.c and
also extend it with handling of multiple feature pages.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
now that each TT entry is characterised by a VLAN ID, the
latter has to be taken into consideration when computing the
local/global table CRC as it would be theoretically possible
to have the same client in two different VLANs
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
To make the translation table code VLAN-aware, each entry
must carry the VLAN ID which it belongs to. This patch adds
such attribute to the related TT structures.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
My university will stop email service for alumni in january 2014, please
use my new e-mail address instead.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Fix bogus merge conflict resolution by checking the return
values of the skb preparation routines.
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Randy found that if network namespace not enabled then
nd_net does not exist and would cause compilation failure.
This is handled correctly by using the dev_net() macro.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the specialized code in __tcp_retransmit_skb() that tries to trim
any ACKed payload preceding a FIN before we retransmit (this was added
in 1999 in v2.2.3pre3). This trimming code was made unreachable by the
more general code added above it that uses tcp_trim_head() to trim any
ACKed payload, with or without a FIN (this was added in "[NET]: Add
segmentation offload support to TCP." in 2002 circa v2.5.33).
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently set the value that variable vid is pointing, which will be
used in FDB later, to 0 at br_allowed_ingress() when we receive untagged
or priority-tagged frames, even though the PVID is valid.
This leads to FDB updates in such a wrong way that they are learned with
VID 0.
Update the value to that of PVID if the PVID is applied.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are using the VLAN_TAG_PRESENT bit to detect whether the PVID is
set or not at br_get_pvid(), while we don't care about the bit in
adding/deleting the PVID, which makes it impossible to forward any
incomming untagged frame with vlan_filtering enabled.
Since vid 0 cannot be used for the PVID, we can use vid 0 to indicate
that the PVID is not set, which is slightly more efficient than using
the VLAN_TAG_PRESENT.
Fix the problem by getting rid of using the VLAN_TAG_PRESENT.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.1Q says that when we receive priority-tagged (VID 0) frames
use the PVID for the port as its VID.
(See IEEE 802.1Q-2011 6.9.1 and Table 9-2)
Apply the PVID to not only untagged frames but also priority-tagged frames.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.1Q says that:
- VID 0 shall not be configured as a PVID, or configured in any Filtering
Database entry.
- VID 4095 shall not be configured as a PVID, or transmitted in a tag
header. This VID value may be used to indicate a wildcard match for the VID
in management operations or Filtering Database entries.
(See IEEE 802.1Q-2011 6.9.1 and Table 9-2)
Don't accept adding these VIDs in the vlan_filtering implementation.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rtmsg_fib function doesn't modify this argument so mark
it const.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers can now use this to parse the regulatory request and
be more verbose when needed.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
It's a fairly big one, with the following highlights:
- NFC digital layer implementation: Most NFC chipsets implement the NFC
digital layer in firmware, but others have more basic functionalities
and expect the host to implement the digital layer. This layer sits
below the NFC core.
- Sony's port100 support: This is "soft" NFC USB dongle that expects the
digital layer to be implemented on the host. This is the first user of
our NFC digital stack implementation.
- Secure element API: We now provide a netlink API for enabling,
disabling and discovering NFC attached (embedded or UICC ones) secure
elements. With some userspace help, this allows us to support NFC
payments.
Only the pn544 driver currently supports that API.
- NCI SPI fixes and improvements: In order to support NCI devices over
SPI, we fixed and improved our NCI/SPI implementation. The currently
most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
and we're planning to use our NCI/SPI framework to implement a
driver for it.
- pn533 fragmentation support in target mode: This was the only missing
feature from our pn533 impementation. We now support fragmentation in
both Tx and Rx modes, in target mode.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=K1A5
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz <sameo@linux.intel.com> says:
"This is the first NFC pull request for the 3.13 kernel.
It's a fairly big one, with the following highlights:
- NFC digital layer implementation: Most NFC chipsets implement the NFC
digital layer in firmware, but others have more basic functionalities
and expect the host to implement the digital layer. This layer sits
below the NFC core.
- Sony's port100 support: This is "soft" NFC USB dongle that expects the
digital layer to be implemented on the host. This is the first user of
our NFC digital stack implementation.
- Secure element API: We now provide a netlink API for enabling,
disabling and discovering NFC attached (embedded or UICC ones) secure
elements. With some userspace help, this allows us to support NFC
payments.
Only the pn544 driver currently supports that API.
- NCI SPI fixes and improvements: In order to support NCI devices over
SPI, we fixed and improved our NCI/SPI implementation. The currently
most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
and we're planning to use our NCI/SPI framework to implement a
driver for it.
- pn533 fragmentation support in target mode: This was the only missing
feature from our pn533 impementation. We now support fragmentation in
both Tx and Rx modes, in target mode."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The current test works fine in practice. The "amount" variable is
actually used as a boolean so negative values or any non-zero values
count as "true". However since we don't allow numbers greater than one,
let's not allow negative numbers either.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_table_lookup has included the rcu lock protection.
Signed-off-by: baker.zhang <baker.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
1) Don't use a wildcard SA if a more precise one is in acquire state,
from Fan Du.
2) Simplify the SA lookup when using wildcard source. We need to check
only the destination in this case, from Fan Du.
3) Add a receive path hook for IPsec virtual tunnel interfaces
to xfrm6_mode_tunnel.
4) Add support for IPsec virtual tunnel interfaces to ipv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename tcp_tso_segment() to tcp_gso_segment(), to better reflect
what is going on, and ease grep games.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When checking statistics or changing parameters on a link, the
link_find_link function is used to locate the link with a given
name. The complex method of deconstructing the name into local
and remote address/interface is error prone and may fail if the
interface names contains special characters. We change the lookup
method to iterate over the list of nodes and compare the link
names.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
link_cmd_set_value() takes commands for link, bearer and media related
configuration. Genereally the function returns 0 when a command is
recognized, and -EINVAL when it is not. However, in the switch for link
related commands it returns 0 even when the command is unrecognized. This
will sometimes make it look as if a failed configuration command has been
successful, but has otherwise no negative effects.
We remove this anomaly by returning -EINVAL even for link commands. We also
rework all three switches to make them conforming to common kernel coding
style.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, rcv_msg() always returns zero on a packet delivery upcall
from net_device.
To make its behavior more compliant with the way this API should be
used, we change this to let it return NET_RX_SUCCESS (which is zero
anyway) when it is able to handle the packet, and NET_RX_DROP otherwise.
The latter does not imply any functional change, it only enables the
driver to keep more accurate statistics about the fate of delivered
packets.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc_block_bearer() currently takes a bearer name (const char*)
as argument. This requires the function to make a lookup to find
the pointer to the corresponding bearer struct. In the current
code base this is not necessary, since the only two callers
(tipc_continue(),recv_notification()) already have validated
copies of this pointer, and hence can pass it directly in the
function call.
We change tipc_block_bearer() to directly take struct tipc_bearer*
as argument instead.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TIPC 'bearer' exists as an abstract concept, while 'media'
is deemed a specific implementation of a bearer, such as Ethernet
or Infiniband media. When a component inside TIPC wants to control
a specific media, it only needs to access the generic bearer API
to achieve this. However, in the current media implementations,
the 'bearer' name is also extensively used in media specific
function and variable names.
This may create confusion, so we choose to replace the term 'bearer'
with 'media' in all function names, variable names, and prefixes
where this is what really is meant.
Note that this change is cosmetic only, and no runtime behaviour
changes are made here.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc_msg_build() now copies message data from iovec to skb_buff
using memcpy_fromiovecend(), which doesn't need to be passed the
iovec length to perform the copying.
So we remove the parameter indicating iovec length in all
functions where TIPC messages are built and sent.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc_msg_build() calls skb_copy_to_linear_data_offset() to copy data
from user space to kernel space. However, the latter function does
in its turn call memcpy() to perform the actual copying. This poses
an obvious security and robustness risk, since memcpy() never makes
any validity check on the pointer it is copying from.
To correct this, we the replace the offending function call with
a call to memcpy_fromiovecend(), which uses copy_from_user() to
perform the copying.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the remote LE device is blocked, then do not create a L2CAP
channel for it. Without a channel, all packets for that connection
will be dropped.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the HCI connection hcon is already dereferenced, then use hcon
directly instead of conn->hcon.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The old blacklist ioctl interface was only able to operate on BR/EDR
addresses. So use the BDADDR_BREDR address type definition instead
of an open coded magic 0 value.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Old user space versions bind the Attribute Protocol socket to
BDADDR_BREDR when they should be using BDADDR_LE_PUBLIC or
BDADDR_LE_RANDOM. The kernel recently introduced stricter checks on the
socket parameters but we need to punch this hole for old user space
versions to keep them working.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In ipcomp_compress(), sortirq is enabled too early, allowing the
per-cpu scratch buffer to be rewritten by ipcomp_decompress()
(called on the same CPU in softirq context) between populating
the buffer and copying the compressed data to the skb.
v2: as pointed out by Steffen Klassert, if we also move the
local_bh_disable() before reading the per-cpu pointers, we can
get rid of get_cpu()/put_cpu().
v3: removed ipcomp_decompress part (as explained by Herbert Xu,
it cannot be called from process context), get rid of cpu
variable (thanks to Eric Dumazet)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Move the debugfs configuration directly into hci_core.c and only expose
it when the controller actually support BR/EDR sniff power saving mode.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The address type is important for the blacklist entries. So include
it at well.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The device_add handling can be done directly in hci_register_dev and
device_remove within hci_unregister_dev.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Create the root Bluetooth debugfs directory during module init
and remove it on module exit.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Create the debugfs directory for each HCI device directly in
hci_register_dev function and remove it during hci_unregister_dev.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make sure to use IS_ERR_OR_NULL for checking the existing of the root
debugfs dentry bt_debugfs.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The uuids debugfs should only be created together with the other
entries after the setup procedure has been finished.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The blacklist debugfs should only be created together with the other
entries after the setup procedure has been finished.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The device blacklist is not taking care of the address type. Actually
store the address type in the list entries and also use them when
looking up addresses in the table.
This is actually a serious bug. When adding a LE public address to
the blacklist, then it would be blocking a device on BR/EDR. And this
is not the expected behavior.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
While working on virtio_net new allocation strategy to increase
payload/truesize ratio, we found that refactoring sk_page_frag_refill()
was needed.
This patch splits sk_page_frag_refill() into two parts, adding
skb_page_frag_refill() which can be used without a socket.
While we are at it, add a minimum frag size of 32 for
sk_page_frag_refill()
Michael will either use netdev_alloc_frag() from softirq context,
or skb_page_frag_refill() from process context in refill_work()
(GFP_KERNEL allocations)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michael Dalton <mwdalton@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For easier debugging of the current voice setting, expose the value
in debugfs if the controller is BR/EDR capable.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For LE capable controllers, the static address can be configured. For
debugging purposes expose the value in debugfs.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The auto_accept_delay debugfs entry is only valid for BR/EDR capable
controllers that also support SSP. If SSP is not available or it is
a LE-only single mode controller this value has no affect and so do
not expose it.
Since the value can be actually changed, switch the permissions
to 0644 to clearly indicate that the value is indeed writeable.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
John W. Linville says:
====================
This is a batch of updates intended for the 3.13 stream...
The biggest item of interest in here is wcn36xx, the new mac80211
driver for Qualcomm WCN3660/WCN3680 hardware.
Regarding the mac80211 bits, Johannes says:
"We have an assortment of cleanups and new features, of which the
biggest one is probably the channel-switch support in IBSS. Nothing
else really stands out much."
On top of that, the ath9k and rt2x00 get a lot of update action from
Felix Fietkau and Gabor Juhos, respectively. There are a handful of
updates to other drivers here and there as well.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit be4f154d5e
bridge: Clamp forward_delay when enabling STP
had a typo when attempting to clamp maximum forward delay.
It is possible to set bridge_forward_delay to be higher then
permitted maximum when STP is off. When turning STP on, the
higher then allowed delay has to be clamed down to max value.
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Half of the rt_cache_stat fields are no longer used after IP
route cache removal, lets shrink this per cpu area.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_can_gso() should only be used as a hint in tcp_sendmsg() to build GSO
packets in the first place. (As a performance hint)
Once we have GSO packets in write queue, we can not decide they are no
longer GSO only because flow now uses a route which doesn't handle
TSO/GSO.
Core networking stack handles the case very well for us, all we need
is keeping track of packet counts in MSS terms, regardless of
segmentation done later (in GSO or hardware)
Right now, if tcp_fragment() splits a GSO packet in two parts,
@left and @right, and route changed through a non GSO device,
both @left and @right have pcount set to 1, which is wrong,
and leads to incorrect packet_count tracking.
This problem was added in commit d5ac99a648 ("[TCP]: skb pcount with MTU
discovery")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP stack should make sure it owns skbs before mangling them.
We had various crashes using bnx2x, and it turned out gso_size
was cleared right before bnx2x driver was populating TC descriptor
of the _previous_ packet send. TCP stack can sometime retransmit
packets that are still in Qdisc.
Of course we could make bnx2x driver more robust (using
ACCESS_ONCE(shinfo->gso_size) for example), but the bug is TCP stack.
We have identified two points where skb_unclone() was needed.
This patch adds a WARN_ON_ONCE() to warn us if we missed another
fix of this kind.
Kudos to Neal for finding the root cause of this bug. Its visible
using small MSS.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
Please pull this batch of fixes intended for the 3.12 stream!
For the mac80211 bits, Johannes says:
"Jouni fixes a remain-on-channel vs. scan bug, and Felix fixes client TX
probing on VLANs."
And also:
"This time I have two fixes from Emmanuel for RF-kill issues, and fixed
two issues reported by Evan Huus and Thomas Lindroth respectively."
On top of those...
Avinash Patil adds a couple of mwifiex fixes to properly inform cfg80211
about some different types of disconnects, avoiding WARNINGs.
Mark Cave-Ayland corrects a pointer arithmetic problem in rtlwifi,
avoiding incorrect automatic gain calculations.
Solomon Peachy sends a cw1200 fix for locking around calls to
cw1200_irq_handler, addressing "lost interrupt" problems.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On receiving an ACK that covers the loss probe sequence, TLP
immediately sets the congestion state to Open, even though some packets
are not recovered and retransmisssion are on the way. The later ACks
may trigger a WARN_ON check in step D of tcp_fastretrans_alert(), e.g.,
https://bugzilla.redhat.com/show_bug.cgi?id=989251
The fix is to follow the similar procedure in recovery by calling
tcp_try_keep_open(). The sender switches to Open state if no packets
are retransmissted. Otherwise it goes to Disorder and let subsequent
ACKs move the state to Recovery or Open.
Reported-By: Michael Sterrett <michael@sterretts.net>
Tested-By: Dormando <dormando@rydia.net>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP/IPv6 fragmentation knows how to compute only TCP/UDP checksum.
This causes problems if SCTP packets has to be fragmented and
ipsummed has been set to PARTIAL due to checksum offload support.
This condition can happen when retransmitting after MTU discover,
or when INIT or other control chunks are larger then MTU.
Check for the rare fragmentation condition in SCTP and use software
checksum calculation in this case.
CC: Fan Du <fan.du@windriver.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
igb/ixgbe have hardware sctp checksum support, when this feature is enabled
and also IPsec is armed to protect sctp traffic, ugly things happened as
xfrm_output checks CHECKSUM_PARTIAL to do checksum operation(sum every thing
up and pack the 16bits result in the checksum field). The result is fail
establishment of sctp communication.
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
netfilter updates: nf_tables pull request
The following patchset contains the current original nf_tables tree
condensed in 17 patches. I have organized them by chronogical order
since the original nf_tables code was released in 2009 and by
dependencies between the different patches.
The patches are:
1) Adapt all existing hooks in the tree to pass hook ops to the
hook callback function, required by nf_tables, from Patrick McHardy.
2) Move alloc_null_binding to nf_nat_core, as it is now also needed by
nf_tables and ip_tables, original patch from Patrick McHardy but
required major changes to adapt it to the current tree that I made.
3) Add nf_tables core, including the netlink API, the packet filtering
engine, expressions and built-in tables, from Patrick McHardy. This
patch includes accumulated fixes since 2009 and minor enhancements.
The patch description contains a list of references to the original
patches for the record. For those that are not familiar to the
original work, see [1], [2] and [3].
4) Add netlink set API, this replaces the original set infrastructure
to introduce a netlink API to add/delete sets and to add/delete
set elements. This includes two set types: the hash and the rb-tree
sets (used for interval based matching). The main difference with
ipset is that this infrastructure is data type agnostic. Patch from
Patrick McHardy.
5) Allow expression operation overload, this API change allows us to
provide define expression subtypes depending on the configuration
that is received from user-space via Netlink. It is used by follow
up patches to provide optimized versions of the payload and cmp
expressions and the x_tables compatibility layer, from Patrick
McHardy.
6) Add optimized data comparison operation, it requires the previous
patch, from Patrick McHardy.
7) Add optimized payload implementation, it requires patch 5, from
Patrick McHardy.
8) Convert built-in tables to chain types. Each chain type have special
semantics (filter, route and nat) that are used by userspace to
configure the chain behaviour. The main chain regarding iptables
is that tables become containers of chain, with no specific semantics.
However, you may still configure your tables and chains to retain
iptables like semantics, patch from me.
9) Add compatibility layer for x_tables. This patch adds support to
use all existing x_tables extensions from nf_tables, this is used
to provide a userspace utility that accepts iptables syntax but
used internally the nf_tables kernel core. This patch includes
missing features in the nf_tables core such as the per-chain
stats, default chain policy and number of chain references, which
are required by the iptables compatibility userspace tool. Patch
from me.
10) Fix transport protocol matching, this fix is a side effect of the
x_tables compatibility layer, which now provides a pointer to the
transport header, from me.
11) Add support for dormant tables, this feature allows you to disable
all chains and rules that are contained in one table, from me.
12) Add IPv6 NAT support. At the time nf_tables was made, there was no
NAT IPv6 support yet, from Tomasz Bursztyka.
13) Complete net namespace support. This patch register the protocol
family per net namespace, so tables (thus, other objects contained
in tables such as sets, chains and rules) are only visible from the
corresponding net namespace, from me.
14) Add the insert operation to the nf_tables netlink API, this requires
adding a new position attribute that allow us to locate where in the
ruleset a rule needs to be inserted, from Eric Leblond.
15) Add rule batching support, including atomic rule-set updates by
using rule-set generations. This patch includes a change to nfnetlink
to include two new control messages to indicate the beginning and
the end of a batch. The end message is interpreted as the commit
message, if it's missing, then the rule-set updates contained in the
batch are aborted, from me.
16) Add trace support to the nf_tables packet filtering core, from me.
17) Add ARP filtering support, original patch from Patrick McHardy, but
adapted to fit into the chain type infrastructure. This was recovered
to be used by nft userspace tool and our compatibility arptables
userspace tool.
There is still work to do to fully replace x_tables [4] [5] but that can
be done incrementally by extending our netlink API. Moreover, looking at
netfilter-devel and the amount of contributions to nf_tables we've been
getting, I think it would be good to have it mainstream to avoid accumulating
large patchsets skip continuous rebases.
I tried to provide a reasonable patchset, we have more than 100 accumulated
patches in the original nf_tables tree, so I collapsed many of the small
fixes to the main patch we had since 2009 and provide a small batch for
review to netdev, while trying to retain part of the history.
For those who didn't give a try to nf_tables yet, there's a quick howto
available from Eric Leblond that describes how to get things working [6].
Comments/reviews welcome.
Thanks!
[1] http://lwn.net/Articles/324251/
[2] http://workshop.netfilter.org/2013/wiki/images/e/ee/Nftables-osd-2013-developer.pdf
[3] http://lwn.net/Articles/564095/
[4] http://people.netfilter.org/pablo/map-pending-work.txt
[4] http://people.netfilter.org/pablo/nftables-todo.txt
[5] https://home.regit.org/netfilter-en/nftables-quick-howto/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP listener refactoring, part 6 :
Use sock_gen_put() from inet_diag_dump_one_icsk() for future
SYN_RECV support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some APs (notably a Sitecom WL-153 v1 with firmware 1.45) are sending
invalid WMM parameters setting AIFSN, ECWmin and ECWmax to zero. The
spec mandates that the value of AIFSN is at least 2, and some cards
(e.g. Intel with the iwldvm driver) can't transmit when the invalid
QoS parameters are actually uploaded to the firmware.
Since there's little chance of being able to guess the values that
the AP actually meant, disable WMM if such an invalid case is found.
Since ECWmin/ECWmax are allowed to be zero, only verify AIFSN >= 2
and ECWmin <= ECWmax.
Reviewed-by: Eliad Peller <eliad@wizery.com>
Reported-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
we can allow users in uninit net namespace to operate ipt_CLUSTERIP
now.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Create proc entries under the ipt_CLUSTERIP directory of proper
net namespace.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Inorder to find clusterip_config in net namespace.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
this lock is used for protecting clusterip_configs of per
net namespace, it should be per net namespace too.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
clusterip_configs should be per net namespace, so operate
cluster in one net namespace won't affect other net
namespace. right now, only allow to operate the clusterip_configs
of init net namespace.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Create /proc/net/ipt_CLUSTERIP directory for per net namespace.
Right now,only allow to create entries under the ipt_CLUSTERIP
in init net namespace.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
TCP listener refactoring, part 7 :
Use sock_gen_put() instead of xt_socket_put_sk() for future
SYN_RECV support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This lets the transport do endian conversion if necessary, and insulates
the drivers from the difference.
Most drivers can use the simple helpers virtio_cread() and virtio_cwrite().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The inquiry_cache debugfs entry is only valid for BR/EDR capable
controllers. In case of single mode LE-only controllers that
entry is not valid.
Move the creating of the debugfs entries to the end of controller
init and only create the inquiry_cache entry if BR/EDR is actually
supported.
At the same time this avoids creating any debugfs entries for
AMP controllers since none of the entries are valid there.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The L2CAP socket parameter for CID are actually provided in little
endian. So convert our constants into little endian before comparing
them.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no need to use a timer since the entire Bluetooth subsystem
runs using workqueues these days.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since the entire Bluetooth subsystem runs in workqueues these days there
is no need to use a timer for deferring work.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Right now we do not allow user space to use connection oriented channels
on LE, and the only CID that can be used is the Attribute Protocol one.
These restrictions went away together with the recent refactoring of the
L2CAP code, but this patch puts them back to their appropriate places.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This function should be operating on scan_rsp_data_len and scan_rsp_data
and not the advertising data variables.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The SMP CID is only defined for LE transports. Instead of returning an
error from smp_sig_channel() in this case (which would cause a
disconnection) just return 0 to ignore the data, which is consistent
with the behavior for other unknown CIDs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The A2MP CID is only valid for BR/EDR transports. We should ignore A2MP
data on non-BR/EDR links and refuse to create an amp_mgr object.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that the only reason code this function can return is
L2CAP_REJ_NOT_UNDERSTOOD we can just do the necessary assignment without
needing a separate function at all.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There is no command handler that would return an EMSGSIZE error, so just
remove this mapping from the l2cap_err_to_reason function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the reason code in the L2CAP command reject is "invalid CID" there
should be four additional bytes of data in the PDU, namely the source
and destination CIDs (which should be zero if one or both are not
applicable). This patch fixes all occurrences of such errors to return
the right kind of PDU.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Since there is update_scan_rsp_data, it is also better to use the
clear name update_adv_data instead of update_ad.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The scan response data is a better place to store the device name
since it has more space available and is also enforcing privacy.
When the controller is advertising, the connectable setting decides
if ADV_IND or ADV_NONCONN_IND is used. In case of ADV_IND, the
remote side is allowed to request the scan response data. Same as
with BR/EDR where either EIR is used or a remote name request. In
non-connectable mode, the device name is not available since it is
not allowed to request scan response data. Same as in BR/EDR where
the device is non-discoverable and no name requests are answered.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
On controller power on and when enabling LE functionality,
make sure that also the scan response data is correctly set.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The scan response data needs to be stored in HCI device and so
add a buffer for it and also ensure to clear it when resetting
the controller.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename the create_ad function into create_adv_data to make it clear
that it is used to create the advertising data. This is important
since later on a function adding the scan response data will be
added.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The return value of mgmt_new_ltk() function is not used and
so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_read_local_oob_data_reply_complete() function
is not used and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_set_local_name_complete() function is
not used and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_set_class_of_dev_complete() function is
not used and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_ssp_enable_complete() function is not
used and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_auth_enable_complete() function is not
used and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_auth_failed() function is not used
and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_pin_code_neg_reply_complete() function is
not used and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_pin_code_reply_complete() function is not
used and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The return value of mgmt_pin_code_request() function is not used
and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
In this case the replacement by l2cap_chan_ready() doesn't change the code
flow, the same operations will executed plus two others that have no
effect: the use of the parent socket, that a non-oriented channel doesn't
have and the reset of conf_state, which is also fine since the connection
is ready at this point.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The wait_ack code has a heavy dependency on the socket data structures
and, as of now, it won't be worthless change it to use non-socket
structures as the only user of such feature is a socket.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We need to remove all direct access of struct sock from L2CAP core.
This change is pretty simple and just add a new L2CAP channel callback to
do the work in the L2CAP socket side.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
As part of the work to remove struct sock from l2cap_core.c and make it
more generic we remove in this commit the direct access to sk->sk_sndtimeo
member. This objective of this change is purely remove sk usage from
l2cap_core.c
Now we have a new l2cap ops to get the current value of sk->sndtimeo. A
l2cap_chan_no_get_sndtimeo was added for users of L2CAP that doesn't need
to set a timeout.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
l2cap_state_change_and_error() introduces the ability to update a
l2cap_user with changes in channel's state and error code with just one
call. The main reason for this is to avoid race conditions between and
setting the state and then the error. Otherwise we would need to release
the lock between both operations.
This is another step of an ongoing work to make l2cap_core.c totally
independent from l2cap's struct sock.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Instead of creating an new function pointer to report errors we are just
reusing state_change for that and there is a simple reason for this, one
place in the l2cap_core.c code needs, in a locked sk, set both the sk_state
and sk_err. If we create two different functions for this we would need to
release the lock between the two operation putting the socket in non
desired state.
The change is transparent to the l2cap_core.c code, user that only needs
to set the state won't need any modification.
This is another step of an ongoing work to make l2cap_core.c totally
independent from l2cap's struct sock.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the discoverable timeout triggers and limited discoverable mode
was used, then the class of device needs to be updated to remove
the limited discoverable bit.
To keep the class of device logic in a central place, expose a new
function mgmt_discoverable_timeout that can be called from the
timeout callback. In case the class of device value needs updating,
it will add the HCI command to the transaction.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The eir_get_length() function is only used from hci_event.c and so
instead of having a public function move it to the location where
it is used.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The eir_append_data() function is only used from mgmt.c and so
instead of having a public function move it to the location where
it is used.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The return value of mgmt_new_link_key() function is not used
and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The limited discoverable mode should be used when a device is only
discoverable for a certain amount of time and after that it returns
back into being non-discoverable.
This adds another option to the set discoverable management command
to clearly distinguish limited discoverable from general discoverable
mode.
While the general discoverable mode can be set with a specific
timeout or as permanent setting, the limited discoverable mode
requires a timeout. The timeout is flexible and the kernel will
not enforce any specific limitations. That GAP part of this is
required by userspace to enforce according to the Bluetooth core
specification.
Devices in limited discoverable mode can still be found by the
general discovery procedure. It is mandatory that a device sets
both GIAC and LIAC when entering limited discoverable mode.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When only the discoverable timeout gets updated, just cancel the current
timeout, store the new timeout value. If the new timeout is valid, then
arm the discoverable timeout again.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The discoverable timeout is currently armed from hci_event.c and causes
some side effects when using HCI commands instead of the management
interface. To make this clear, only arm the discoverable timeout from
the management command complete handler.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the discoverable mode gets changed, ensure that the class of
device value has the correct limited discoverable bit value set.
Since the class of device HCI command will only be send to the
controller when the value changes, it is safe to just always
trigger the update.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The return value of mgmt_write_scan_failed() function is not used
and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The return value of mgmt_connectable() function is not used
and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The return value of mgmt_discoverable() function is not used
and so just change it to return void.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new flag that can be set when in limited discoverable mode. This
flag will cause the limited discoverable bit in the class of device
value to bet set.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Magically updating the advertising data when some random command enables
advertising in the controller is not really a good idea. It also caused
a bit of complicated code with the exported hci_udpate_ad function that
is shared from many places.
This patch consolidates the advertising data update into the management
core. It also makes sure that when powering on with LE enabled or later
on enabling LE the controller has a good default for advertising data.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the discoverable timeout triggers and it is time to turn inquiry
scan back off, use the HCI request framework to do it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Bitrate mask were not respected in transmissions, causing (for
example) P2P GO/client to use CCK rates for auth and assoc frames.
Fix it by considering the rate mask in __rate_control_send_low().
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Transmissions with the IEEE80211_TX_CTL_NO_CCK_RATE flag set
(which can come from userspace) were no longer guaranteed to
be transmitted with allowed rates since commit 2103dec147
("mac80211: select and adjust bitrates according to channel
mode") due to a missing rate_flags check in that commit. The
commit also introduced the need to check the 5/10 MHz flags
but accidentally didn't. Fix it by adding the missing check.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a minor coding style violation and so just fix it. No actual
logic has changed.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Improve the SH fallback realserver selection strategy.
With sh and sh-fallback, if a realserver is down, this attempts to
distribute the traffic that would have gone to that server evenly
among the remaining servers.
Signed-off-by: Alexander Frolkin <avf@eldamar.org.uk>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
commit 578bc3ef1e ("ipvs: reorganize dest trash") added
rcu_barrier() on cleanup to wait dest users and schedulers
like LBLC and LBLCR to put their last dest reference.
Using rcu_barrier with many namespaces is problematic.
Trying to fix it by freeing dest with kfree_rcu is not
a solution, RCU callbacks can run in parallel and execution
order is random.
Fix it by creating new function ip_vs_dest_put_and_free()
which is heavier than ip_vs_dest_put(). We will use it just
for schedulers like LBLC, LBLCR that can delay their dest
release.
By default, dests reference is above 0 if they are present in
service and it is 0 when deleted but still in trash list.
Change the dest trash code to use ip_vs_dest_put_and_free(),
so that refcnt -1 can be used for freeing. As result,
such checks remain in slow path and the rcu_barrier() from
netns cleanup can be removed.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Read the current IAC LAP values when initializing the controller. The
values are not used, but it is good to have them in the trace files
for debugging purposes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
When initializing a controller make sure to read out the number of
supported IAC and store its result. This value is needed to determine
if limited discoverable for BR/EDR can be configured or not.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The scan window parameter for connection establishment and passive
scanning needs to be smaller or equal than the scan interval.
Instead of waiting for a controller to reject these values later on,
just reject them right away.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If a socket was bound to an address type other than BR/EDR (such as LE)
we should reject trying to connect it to a BR/EDR address. The same
applies for binding to BR/EDR and trying to connect to non-BR/EDR.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We need to verify that the bdaddr type passed to connect() and bind() is
within the set of valid values. If it is not we need to cleanly fail
with EINVAL.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch converts Set Discoverable to use an asynchronous request
along with its own completion callback. This is necessary for splitting
raw HCI socket use cases from mgmt, as well as for enabling the hooking
up of Advertising parameters together with the HCI_DISCOVERABLE flag
(coming in later patches).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
