The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset
support when it is under the control of Q6DSP.
Add support for those resets and adds IDs for clients to request the reset.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-3-srinivas.kandagatla@linaro.org
The LPASS (Low Power Audio Subsystem) clock controller provides reset
support when it is under the control of Q6DSP.
Add support for those resets and adds IDs for clients to request the reset.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608125315.11454-2-srinivas.kandagatla@linaro.org
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C. The recording links were not tested,
but should be similar to previous platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-2-krzysztof.kozlowski@linaro.org
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C. The recording links were not tested,
but should be similar to previous platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612173758.286411-1-krzysztof.kozlowski@linaro.org
Add basic devicetree support for SDX75 platform and IDP board from
Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686311438-24177-6-git-send-email-quic_rohiagar@quicinc.com
The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.
Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-topic-sm8550-upstream-pm8550-lpg-dt-v4-4-a288f24af81b@linaro.org
The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.
This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.
Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220739.1886155-1-quic_bjorande@quicinc.com
The adreno smmu should be compatible with qcom,adreno-smmu as well for
per-process page tables to work.
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220532.1884860-1-quic_bjorande@quicinc.com
&dispcc status was changed to okay by default in the platform, no need
to do it again in the board.
Fixes: 2ce38cc1e8 ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612220420.1884631-1-quic_bjorande@quicinc.com
With wider usage on more boards, there have been reports of the
following:
[ 315.016174] qcom-ethqos 20000.ethernet eth0: no phy at addr -1
[ 315.016179] qcom-ethqos 20000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)
which has been fairly random and isolated to specific boards.
Early reports were written off as a hardware issue, but it has been
prevalent enough on boards that theory seems unlikely.
In bring up of a newer piece of hardware, similar was seen, but this
time _consistently_. Moving the reset to the mdio bus level (which isn't
exactly a lie, it is the only device on the bus so one could model it as
such) fixed things on that platform. Analysis on sa8540p-ride shows that
the phy's reset is not being handled during the OUI scan if the reset
lives in the phy node:
# gpio 752 is the reset, and is active low, first mdio reads are the OUI
modprobe-420 [006] ..... 154.738544: mdio_access: stmmac-0 read phy:0x08 reg:0x02 val:0x0141
modprobe-420 [007] ..... 154.738665: mdio_access: stmmac-0 read phy:0x08 reg:0x03 val:0x0dd4
modprobe-420 [004] ..... 154.741357: gpio_value: 752 set 1
modprobe-420 [004] ..... 154.741358: gpio_direction: 752 out (0)
modprobe-420 [004] ..... 154.741360: gpio_value: 752 set 0
modprobe-420 [006] ..... 154.762751: gpio_value: 752 set 1
modprobe-420 [007] ..... 154.846857: gpio_value: 752 set 1
modprobe-420 [004] ..... 154.937824: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
modprobe-420 [004] ..... 154.937932: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014
Moving it to the bus level, or specifying the OUI in the phy's
compatible ensures the reset is handled before any mdio access
Here is tracing with the OUI approach (which skips scanning the OUI):
modprobe-549 [007] ..... 63.860295: gpio_value: 752 set 1
modprobe-549 [007] ..... 63.860297: gpio_direction: 752 out (0)
modprobe-549 [007] ..... 63.860299: gpio_value: 752 set 0
modprobe-549 [004] ..... 63.882599: gpio_value: 752 set 1
modprobe-549 [005] ..... 63.962132: gpio_value: 752 set 1
modprobe-549 [006] ..... 64.049379: mdio_access: stmmac-0 write phy:0x08 reg:0x0d val:0x0003
modprobe-549 [006] ..... 64.049490: mdio_access: stmmac-0 write phy:0x08 reg:0x0e val:0x0014
The OUI approach is taken given the description matches the situation
perfectly (taken from ethernet-phy.yaml):
- pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
description:
If the PHY reports an incorrect ID (or none at all) then the
compatible list may contain an entry with the correct PHY ID
in the above form.
The first group of digits is the 16 bit Phy Identifier 1
register, this is the chip vendor OUI bits 3:18. The
second group of digits is the Phy Identifier 2 register,
this is the chip vendor OUI bits 19:24, followed by 10
bits of a vendor specific ID.
With this in place the sa8540p-ride's phy is probing consistently, so
it seems the floating reset during mdio access was the issue. In either
case, it shouldn't be floating so this improves the situation. The below
link discusses some of the relationship of mdio, its phys, and points to
this OUI compatible as a way to opt out of the OUI scan pre-reset
handling which influenced this decision.
Link: https://lore.kernel.org/all/dca54c57-a3bd-1147-63b2-4631194963f0@gmail.com/
Fixes: 57827e87be ("arm64: dts: qcom: sa8540p-ride: Add ethernet nodes")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230608201513.882950-1-ahalaney@redhat.com
Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm
SC8180X platform. Supported peripherals includes keyboard, touchpad,
UFS storage, external USB and WiFi.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-16-vkoul@kernel.org
SC8180X based platforms have PM8150, PM8150C, PMC8180 and SMB2351 PMICs,
so add these as well
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-14-vkoul@kernel.org
This patch adds gpu, gmu, gpucc, dispcc and finally the mdss node with
dsi0/1, dp0/1 and edp subnodes as found in this SoC
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-13-vkoul@kernel.org
This patch adds remoteprocs, wifi and usb and usb phy nodes
for this SoC
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-12-vkoul@kernel.org
MSM8939 has the aliases defined separately for each board (because
there could be (theoretically) a board where the slots are numbered
differently. To make MSM8916 and MSM8939 more consistent do the same
for all MSM8916 boards and move aliases there.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-6-bec0f5fb46fb@gerhold.net
All definitions in pm8916.dtsi use the &pm8916_ label prefix, only the
codec uses the &wcd_codec label. &wcd_codec is confusing because the
codec on MSM8916 is split into a "wcd-digital" and "wcd-analog" part
and both could be described with &wcd_codec.
Let's just name it &pm8916_codec so it's consistent with all other PMIC
device nodes.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-5-bec0f5fb46fb@gerhold.net
Right now MDSS related definitions cannot be properly grouped together
in board DTs because the labels do not use consistent prefixes. The DSI
PHY label is particularly weird because the DSI number is at the end
(&dsi_phy0) while DSI itself is called &dsi0.
Follow the example of more recent SoCs and give all the MDSS related
nodes a consistent label that allows proper grouping.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-4-bec0f5fb46fb@gerhold.net
Make the labels for the BLSP I2C/SPI pinctrl consistent with the one
used for UART by adding the missing blsp_ prefix. This allows having
them properly grouped together.
The nodes are only reordered in msm8939.dtsi for now since the pinctrl
definitions in msm8916-pins.dtsi are currently still unordered anyway.
(I will try fixing this in a future patch.)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-3-bec0f5fb46fb@gerhold.net
For some reason the BLSP UART controllers have a label with a number
behind blsp (&blsp1_uartN) while I2C/SPI are named without (&blsp_i2cN).
This is confusing, especially for proper node ordering in board DTs.
Right now all board DTs are ordered as if the number behind blsp does
not exist (&blsp_i2cN comes before &blsp1_uartN). Strictly speaking
correct ordering would be the other way around ('1' comes before '_').
End this confusion by giving the UART controllers consistent labels.
There is just one BLSP on MSM8916/39 so the number is redundant.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-2-bec0f5fb46fb@gerhold.net
MSM8916 is the only ARM64 Qualcomm SoC that is still using the old
&msmgpio name. Change this to &tlmm to avoid confusion.
Note that the node ordering does not change because the MSM8916 device
trees have pinctrl separated at the bottom (similar to sc7180).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-1-bec0f5fb46fb@gerhold.net
Add USB superspeed qmp phy node to dtsi.
Make sure that the various board dts files (which include sm4250.dtsi file)
continue to work as intended.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150511.2346357-4-bhupesh.sharma@linaro.org
Add the initial device tree support for the Reference Design
Platform(RDP) 442 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, SPI NOR, eMMC and I2C.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509160133.3794-3-quic_kathirav@quicinc.com
Document the MI01.3 (Reference Design Platform 442) board based on IPQ5332
family of SoCs.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509160133.3794-2-quic_kathirav@quicinc.com
Add device tree bindings for the graphics clock controller on Qualcomm
Technology Inc's SM8450 SoCs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-waipio-gpucc-v1-1-4f40e282af1d@linaro.org
Correct the typo in 'regulator-name' property.
apq8096-ifc6640.dtb: v1p05-regulator: 'regulator-name' is a required property
apq8096-ifc6640.dtb: v1p05-regulator: Unevaluated properties are not allowed ('reglator-name' was unexpected)
Fixes: 6cbdec2d3c ("arm64: dts: qcom: msm8996: Introduce IFC6640")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507174516.264936-3-krzysztof.kozlowski@linaro.org
