Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZllLrAAKCRBZ7Krx/gZQ
65n8AP40w8ghf88QMpI6jhxmxQdaiGFQp+AohS/iwyX7t8PgqgEAuhkcmGJpGahr
GZq6/dxugqyNwCtNJPBWAr2x4GXbaA0=
=+J5A
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull struct file leak fixes from Al Viro:
"a couple of leaks on failure exits missing fdput()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
lirc: rc_dev_get_from_fd(): fix file leak
powerpc: fix a file leak in kvm_vcpu_ioctl_enable_cap()
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmaXfCQACgkQCF8+vY7k
4RWuBg/+NRAVuzYW3AQPIaggajTGHfkk6WCTCVgQQZFCDqphS6YtgfXUJ8qO5YXk
ZieGu+g2081BFehzcZxcaSo9pFWyqX1fjUU2sjFwRDSl9NRctsjvKE9J1DVKCsMW
QU5yOYyBJmoVugj4YCH7Yga8OElZAWperxJidV4AmFkX93OwZDZl+wNKuSTmG/lX
ju+Z6yzv0DN0WvgL8+LlZ2k5tpx+kAld07FFwQM54MPI9CBWyQjogGyro/1S6ymh
WAbwbEMCvGSvGhi4issMMOK2mpmh2EAKCXBMWF5bXNOLuFWrU9TtCBr6AITKDvn7
btQNpa8GApO+GehEQtWOX5WgZp2ypwCrMUtiwftPOtF4Z8Tl7MJfn4u6wWCxj4cy
67HbOgWRZQRIzyUSF8vay6PeMrh8jYi+unWuOxGpnzilno1nV2hTzh4n1we15qIn
8pnNSbtgrJCvrIgtATYjP1FWgjBxwuNIpFGxo2ly+hgbu6COLZFfg0Oju3FBdOF1
ZxGkp1SaxcKeuFa6kbATj7y2dAjtre8drB9RfJY1C97Ta+C9ws4jBytVHbceA7u+
GJfAis2CEStLPpe3ND9n0ekeB/qSPcgGC2HLQR7L1u30Kx75T4I49HF0lcKev9gK
oTRUPvZu/bI6NmSRwYYY7jo1rox5ffftJ2ZICeQaluV2dbOMUc8=
=7nBb
-----END PGP SIGNATURE-----
Merge tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor drivers: gc05a2, gc08a3 and imx283
- New serializer/deserializer drivers: max96714 and max96717
- New JPEG encoder driver: e5010
- Support for Raspberry Pi PiSP Backend (BE) ISP driver
- Old documentation for av7110 driver removed, as a new version was
added as Documentation/userspace-api/media/dvb/legacy*.rst
- atompisp: Linux firmwares are now available, so drop firmware-related
task from TODO and update firmware logic
- The imx258 driver has gained several improvements
- wave5 driver has gained support for HEVC decoding
- em28xx gained support for MyGica UTV3
- av7110 budget-patch driver removed
- Lots of other cleanups, improvements and fixes
* tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits)
media: raspberrypi: Switch to remove_new
media: uapi: pisp_be_config: Add extra config fields
media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config
media: uapi: pisp_common: Capitalize all macros
media: uapi: pisp_common: Add 32 bpp format test
media: uapi: pisp_be_config: Drop BIT() from uAPI
media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs
media: atomisp: Fix spelling mistakes in sh_css_sp.c
media: atomisp: Fix spelling mistake in ia_css_debug.c
media: atomisp: Fix spelling mistake in hmm_bo.c
media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c
media: atomisp: Fix spelling mistake in sh_css_internal.h
media: atomisp: Fix spelling mistake "pipline" -> "pipeline"
media: atomisp: Remove unused GPIO related defines and APIs
media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert()
media: atomisp: Clean up unused macros from math_support.h
media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2
media: atomisp: Update TODO
media: atomisp: Prefix firmware paths with "intel/ipu/"
media: atomisp: Remove firmware_name module parameter
...
- Add support for HW-managed devices
pmdomain providers:
- amlogic: Add support for the A5 and the A4 power domains
- arm: Enable system wakeups for the SCMI PM domain
- qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode
pmdomain consumers:
- qcom/media/venus: Enable support for switching GDSC HW-mode on V6
-----BEGIN PGP SIGNATURE-----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=ZIDp
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for HW-managed devices
pmdomain providers:
- amlogic: Add support for the A5 and the A4 power domains
- arm: Enable system wakeups for the SCMI PM domain
- qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode
pmdomain consumers:
- qcom/media/venus: Enable support for switching GDSC HW-mode on V6"
* tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: amlogic: Constify struct meson_secure_pwrc_domain_desc
venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's
clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
PM: domains: Add the domain HW-managed mode to the summary
PM: domains: Allow devices attached to genpd to be managed by HW
pmdomain: amlogic: Add support for A5 power domains controller
dt-bindings: power: add Amlogic A5 power domains
pmdomain: amlogic: add missing MODULE_DESCRIPTION() macros
pmdomain: arm: scmi_pm_domain: set flag GENPD_FLAG_ACTIVE_WAKEUP
pmdomain: renesas: rmobile-sysc: Use for_each_child_of_node_scoped()
pmdomain: core: Use genpd_is_irq_safe() helper
pmdomain: amlogic: Add support for A4 power domains controller
dt-bindings: power: add Amlogic A4 power domains
The remove callback's return value is about to change from int to void,
this is done by commit 0edb555a65 ("platform: Make
platform_driver::remove() return void"). Prepare for merging the patch by
switching the PiSP driver from remove to remove_new callback.
Fixes: 12187bd5d4 ("media: raspberrypi: Add support for PiSP BE")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The Venus driver requires vcodec GDSC to be ON in SW mode for clock
operations and move it back to HW mode to gain power benefits. Earlier,
as there is no interface to switch the GDSC mode from GenPD framework,
the GDSC is moved to HW control mode as part of GDSC enable callback and
venus driver is writing to its POWER_CONTROL register to keep the GDSC ON
from SW whereever required. But the POWER_CONTROL register addresses
are not constant and can vary across the variants.
Also as per the HW recommendation, the GDSC mode switching needs to be
controlled from respective GDSC register and this is a uniform approach
across all the targets. Hence use dev_pm_genpd_set_hwmode() API which
controls GDSC mode switching using its respective GDSC register.
In venus V6 variants, the vcodec gdsc gets enabled in SW mode by default
with new HW_CTRL_TRIGGER flag and there is no need to switch it to SW
mode again after enable, hence add check to avoid switching gdsc to SW mode
again after gdsc enable. Similarly add check to avoid switching GDSC to HW
mode before disabling the GDSC, so GDSC gets enabled in SW mode in the next
enable.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240624044809.17751-6-quic_jkona@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=qWJ6
-----END PGP SIGNATURE-----
Merge tag 'media/v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some fixes related to the IPU6 driver"
* tag 'media/v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ivsc: Depend on IPU_BRIDGE or not IPU_BRIDGE
media: intel/ipu6: Fix a null pointer dereference in ipu6_isys_query_stream_by_source
media: ipu6: Use the ISYS auxdev device as the V4L2 device's device
Correct error handling within the dcmipp_create_subdevs by properly
decrementing the i counter when releasing the subdevs.
Fixes: 28e0f37722 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[hverkuil: correct the indices: it's [i], not [i - 1].]
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There appears to be a possible use after free with vdec_close().
The firmware will add buffer release work to the work queue through
HFI callbacks as a normal part of decoding. Randomly closing the
decoder device from userspace during normal decoding can incur
a read after free for inst.
Fix it by cancelling the work in vdec_close.
Cc: stable@vger.kernel.org
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Core dump is generated whenever there is system error reported
by firmware. Right now, multiple such dumps are generated if
recovery fails in first attempt, since the sys error handler is
invoked again for every failed recovery.
To avoid it, add conditional check to generate core dump only
once during every system error notification from firmware.
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: document new dump_core field]
For scenarios, when source change is followed by VIDIOC_STREAMOFF
on output plane, driver should discard any queued OUTPUT
buffers, which are not decoded or dequeued.
Flush with HFI_FLUSH_INPUT does not have any actual impact.
So, fix it, by invoking HFI_FLUSH_ALL, which will flush all
queued buffers.
Fixes: 85872f861d ("media: venus: Mark last capture buffer")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Nathan Hebert <nhebert@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/common/videobuf2/videobuf2-dvb.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: helpers library -> helper library]
Fixes changing the Line Out audio source with the video input
on MyGica UTV3 board. Previously, GPIOs were only set in
em28xx_set_audio_source(), which only boards with USB audio
support reach.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card
that has analog TV, composite video, and FM radio inputs, an IR
remote, and provides audio only as Line Out, but not over USB.
Mine is prepared for an FM tuner, but not equipped with one.
Support for FM radio is therefore missing. The device contains:
- Empia EM2860 USB bridge
- Philips SAA7113 video decoder
- NXP TDA9801T demodulator
- Tena TNF931D-DFDR1 tuner
- ST HCF4052 demux, switches input audio to Line Out
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add keymap for the simple IR (RC-5) remote that comes with the
MyGica UTV3 Analog USB2.0 TV Box video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tuner ranges were determined by USB capturing the vendor driver of a
MyGica UTV3 video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add check for the return value of v4l2_fwnode_endpoint_parse() and
return the error if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-mc-common.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/common/uvc.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/i2c/uda1342.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/dvb-frontends/au8522_decoder.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/dvb-frontends/mb86a16.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/ti/vpe/ti-vpdma.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos-fimc-lite.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos-fimc-is.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos4-is-common.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Decouple the direct calls to VFE's vfe_get/put in the CSID subdev
in order to prepare for the introduction of IFE subdev.
Also decouple CSID base address from VFE since on the Titan platform
CSID register base address resides within VFE's base address.
Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Move out the format related helper functions from vfe and video in a
separate file. The goal here is to create a format API.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Following the example of VFE and CSID, attach the CSIPHY
formats to the subdevices resources.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Following the example of VFE, move all formats of the decoder
to camss-csid.c and attach them to the subdevices resources.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Video node formats have direct dependency by the sub-device pad formats.
Remove dependency for SoC version and move format definitions in device
which creates video node.
This commit attaches a struct to the VFE resources that holds format
description, so it is much easier to assign them to the video node.
No need to use a switch-case.
NOTE: The mbus_bpp is used to calculate the clock rates and is different
from bpp which is the bits per pixel written to memory. We need to keep
both values to not break the calcualtions.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Currently resources structure grows with additional parameters required for
each sub-deivce. However each sub-device has some specific resources or
configurations which need to be passed during the initialization.
This change adds per sub-device type structure to simplify the things
and removes the magical void pointer to hw_ops.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of using hardwired video loopback limited to a single vivid
instance, use the new 'Connected To' controls to only loopback if an
HDMI or S-Video input is connected to another output, which can be
in another vivid instance. Effectively this emulates connecting and
disconnecting an HDMI/S-Video cable.
The Loop Video control is dropped since it has now been replaced by
the new 'Connected To' controls. The Display Present has also been
dropped since it no longer fits.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Co-developed-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
The video loopback functionality in vivid is very crude. What we really
want is to be able to emulate connecting an HDMI or S-Video input to
an HDMI or S-Video output, and the input and output can be in different
vivid instances.
Effectively this emulates what happens when you physically connect an
HDMI or S-Video cable between two devices.
In particular, this makes prototyping with vivid much more realistic.
This patch creates a menu control for each HDMI or S-Video input. The
menu control starts with "Test Pattern Generator" and "None" (i.e.
disconnected). After that up to 62 HDMI or S-Video outputs are listed
that you can connect the input to.
If there are more than 62 HDMI or S-Video outputs, then those will not
be included in the menu (currently menucontrols have max 64 entries).
If an input is connected to an output, then all other 'Connected To'
controls are updated to exclude that output to avoid having multiple
inputs connected to the same output.
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: use u8 in loops in vivid_create_controls() to avoid truncate warning]
Add the instance number before the input or output number.
So "HDMI 1" becomes "HDMI 000-1".
This is helps identifying which input or output belongs to
which vivid instance.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When setting the EDID it would attempt to update two controls
that are only present if there is an HDMI output configured.
If there isn't any (e.g. when the vivid module is loaded with
node_types=1), then calling VIDIOC_S_EDID would crash.
Fix this by first checking if outputs are present.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Returning an EDID for a connected output would modify the original
input EDID with the physical address of the output. That causes
problems, and it should just update the physical address of the
output EDID.
Update vivid_hdmi_edid to set the physical address to 0.0.0.0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To support sources that implement the .enable_streams() and
.disable_streams() operations, replace the manual calls to the subdev
.s_stream() operation with the v4l2_subdev_enable_streams() and
v4l2_subdev_disable_streams() helpers. The helpers fall back to
.s_stream() if the source doesn't implement the new operations, so
backward compatibility is preserved.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use CCI_REG16_LE macro in order to access little-endian
encoded registers of the P3 (CSI) section.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Correct error handling within the dcmipp_create_subdevs by properly
decrementing the i counter when releasing the subdeves.
Fixes: 28e0f37722 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for the Raspberry Pi PiSP Back End.
The driver has been upported from the Raspberry Pi kernel at revision
f74893f8a0c2 ("drivers: media: pisp_be: Update seqeuence numbers of the
buffers").
The ISP documentation is available at:
https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.org>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: drop dev_err after platform_get_irq to fix a coccinelle check]
Add Raspberry Pi compressed RAW Bayer formats.
The compression algorithm description is provided by Nick Hollinghurst
<nick.hollinghurst@raspberrypi.com> from Raspberry Pi.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add format description for the PiSP Back End configuration parameter
buffer.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
While queue_setup was correct for CREATE_BUFS support for
video devices, for VBI, SDR and touch devices it was wrong.
This was found after adding new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In several places a division by fmt->vdownsampling[p] was
missing in the sizeimage[p] calculation, causing incorrect
behavior for multiplanar formats were some planes are smaller
than the first plane.
Found by new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store the active formats and crop rectangle in the subdevice active
state. This simplifies implementation of the format and selection
accessors, and allows using the v4l2_subdev_get_fmt() helper to
implement the .get_fmt() operation.
The active configuration that is used in the .process_frame() handler is
still stored in the vimc_scaler_device structure. The driver could
instead access the active state in the .process_frame() handler, but the
required locking could interfere with the real time constraints of the
frame processing. This data would be stored in registers in the
.s_stream() handler for real hardware, storing it in dedicated storage
thus mimics a real driver. To differentiate them from the rest of the
device private data, move the corresponding fields to a sub-structure of
vimc_scaler_device named hw.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
