Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device,
the following test cycle has been implemented:
- power on
- check logs
- shutdown
- after detecting the system shutdown, disconnect power
- after approximately 60 seconds of sleep, power is restored
Running some cycles, sometimes error logs like this appear:
kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19
kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19
...
These failed operation are happening during ax88179_reset execution, so
the initialization could not be correct.
In order to avoid this, we need to increase the delay after reset and
clock initial operations. By using these larger values, many cycles
have been run and no failed operations appear.
It would be better to check some status register to verify when the
operation has finished, but I do not have found any available information
(neither in the public datasheets nor in the manufacturer's driver). The
only available information for the necessary delays is the maufacturer's
driver (original values) but the proposed values are not enough for the
tested devices.
Fixes: e2ca90c276 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Reported-by: Herb Wei <weihao.bj@ieisystem.com>
Tested-by: Herb Wei <weihao.bj@ieisystem.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
indirect_call_wrapper.h is not, strictly speaking, networking specific.
However, it's git history indicates that in practice changes go through
netdev and thus the netdev maintainers have effectively been taking
responsibility for it.
Formalise this by adding it to the NETWORKING [GENERAL] section in the
MAINTAINERS file.
It is not clear how many other files under include/linux fall into this
category and it would be interesting, as a follow-up, to audit that and
propose further updates to the MAINTAINERS file as appropriate.
Link: https://lore.kernel.org/netdev/20231116010310.4664dd38@kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231120-indirect_call_wrapper-maintainer-v1-1-0a6bb1f7363e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Haiyang Zhang says:
====================
hv_netvsc: fix race of netvsc, VF register, and slave bit
There are some races between netvsc probe, set notifier, VF register,
and slave bit setting.
This patch set fixes them.
====================
Link: https://lore.kernel.org/r/1700411023-14317-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a VF is being exposed form the kernel, it should be marked as "slave"
before exposing to the user-mode. The VF is not usable without netvsc
running as master. The user-mode should never see a VF without the "slave"
flag.
This commit moves the code of setting the slave flag to the time before
VF is exposed to user-mode.
Cc: stable@vger.kernel.org
Fixes: 0c195567a8 ("netvsc: transparent VF management")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If VF NIC is registered earlier, NETDEV_REGISTER event is replayed,
but NETDEV_POST_INIT is not.
Move register_netdevice_notifier() earlier, so the call back
function is set before probing.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The rtnl lock also needs to be held before rndis_filter_device_add()
which advertises nvsp_2_vsc_capability / sriov bit, and triggers
VF NIC offering and registering. If VF NIC finished register_netdev()
earlier it may cause name based config failure.
To fix this issue, move the call to rtnl_lock() before
rndis_filter_device_add(), so VF will be registered later than netvsc
/ synthetic NIC, and gets a name numbered (ethX) after netvsc.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the sock diag modules in one fell swoop.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During 'ifconfig <netdev> down' one RSS memory was not getting freed.
This patch fixes the same.
Fixes: 81a4362016 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
wg_xmit() can be called concurrently, KCSAN reported [1]
some device stats updates can be lost.
Use DEV_STATS_INC() for this unlikely case.
[1]
BUG: KCSAN: data-race in wg_xmit / wg_xmit
read-write to 0xffff888104239160 of 8 bytes by task 1375 on cpu 0:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...
read-write to 0xffff888104239160 of 8 bytes by task 1378 on cpu 1:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...
v2: also change wg_packet_consume_data_done() (Hangbin Liu)
and wg_packet_purge_staged_packets()
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the device uses a custom subsystem vendor ID, the function
wx_sw_init() returns before the memory of 'wx->mac_table' is allocated.
The null pointer will causes the kernel panic.
Fixes: 79625f45ca ("net: wangxun: Move MAC address handling to libwx")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netdev subsystem has had a subsystem process document for a while
now. Link it appropriately in MAINTAINERS with the P: tag.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells says:
====================
rxrpc: ACK handling fixes
Here are a couple of patches to fix ACK handling in AF_RXRPC:
(1) Allow RTT determination to use an ACK of any type as the response from
which to calculate RTT, provided ack.serial matches the serial number
of the outgoing packet.
(2) Defer the response to a PING ACK packet (or any ACK with the
REQUEST_ACK flag set) until after we've parsed the packet so that we
carry up to date information if the Tx or Rx rings are advanced.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Defer the generation of a PING RESPONSE ACK in response to a PING ACK until
we've parsed the PING ACK so that we pick up any changes to the packet
queue so that we can update ackinfo.
This is also applied to an ACK generated in response to an ACK with the
REQUEST_ACK flag set.
Note that whilst the problem was added in commit 248f219cb8, it didn't
really matter at that point because the ACK was proposed in softirq mode
and generated asynchronously later in process context, taking the latest
values at the time. But this fix is only needed since the move to parse
incoming packets in an I/O thread rather than in softirq and generate the
ACK at point of proposal (b0346843b1).
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix RTT determination to be able to use any type of ACK as the response
from which RTT can be calculated provided its ack.serial is non-zero and
matches the serial number of an outgoing DATA or ACK packet. This
shouldn't be limited to REQUESTED-type ACKs as these can have other types
substituted for them for things like duplicate or out-of-order packets.
Fixes: 4700c4d80b ("rxrpc: Fix loss of RTT samples due to interposed ACK")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
The blamed commit below introduced a typo causing 'gretap' test-case
failures:
./rtnetlink.sh -t kci_test_gretap -v
COMMAND: ip link add name test-dummy0 type dummy
COMMAND: ip link set test-dummy0 up
COMMAND: ip netns add testns
COMMAND: ip link help gretap 2>&1 | grep -q '^Usage:'
COMMAND: ip -netns testns link add dev gretap00 type gretap seq key 102 local 172.16.1.100 remote 172.16.1.200
COMMAND: ip -netns testns addr add dev gretap00 10.1.1.100/24
COMMAND: ip -netns testns link set dev gretap00 ups
Error: either "dev" is duplicate, or "ups" is a garbage.
COMMAND: ip -netns testns link del gretap00
COMMAND: ip -netns testns link add dev gretap00 type gretap external
COMMAND: ip -netns testns link del gretap00
FAIL: gretap
Fix it by using the correct keyword.
Fixes: 9c2a19f715 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit a72178cfe8 ("net/smc: Fix dependency of SMC on ISM")
you can build the ism code without selecting the SMC network protocol.
That leaves some ism functions be reported as unused. Move these
functions under the conditional compile with CONFIG_SMC.
Also codify the suggestion to also configure the SMC protocol in ism's
Kconfig - but with an "imply" rather than a "select" as SMC depends on
other config options and allow for a deliberate decision not to build
SMC. Also, mention that in ISM's help.
Fixes: a72178cfe8 ("net/smc: Fix dependency of SMC on ISM")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix some superficial issues with the tracing of rxrpc_bundle structs,
including:
(1) Set the debug_id when the bundle is allocated rather than when it is
set up so that the "NEW" trace line displays the correct bundle ID.
(2) Show the refcount when emitting the "FREE" traceline.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Only present the DWMAC_LOONGSON option on architectures where it can
actually be used.
This follows the same logic as the DWMAC_INTEL option.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.
The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.
The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- core: fix undefined behavior in netdev name allocation
- bpf: do not allocate percpu memory at init stage
- netfilter: nf_tables: split async and sync catchall in two functions
- mptcp: fix possible NULL pointer dereference on close
Current release - new code bugs:
- eth: ice: dpll: fix initial lock status of dpll
Previous releases - regressions:
- bpf: fix precision backtracking instruction iteration
- af_unix: fix use-after-free in unix_stream_read_actor()
- tipc: fix kernel-infoleak due to uninitialized TLV value
- eth: bonding: stop the device in bond_setup_by_slave()
- eth: mlx5:
- fix double free of encap_header
- avoid referencing skb after free-ing in drop path
- eth: hns3: fix VF reset
- eth: mvneta: fix calls to page_pool_get_stats
Previous releases - always broken:
- core: set SOCK_RCU_FREE before inserting socket into hashtable
- bpf: fix control-flow graph checking in privileged mode
- eth: ppp: limit MRU to 64K
- eth: stmmac: avoid rx queue overrun
- eth: icssg-prueth: fix error cleanup on failing initialization
- eth: hns3: fix out-of-bounds access may occur when coalesce info is
read via debugfs
- eth: cortina: handle large frames
Misc:
- selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=VjWw
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from BPF and netfilter.
Current release - regressions:
- core: fix undefined behavior in netdev name allocation
- bpf: do not allocate percpu memory at init stage
- netfilter: nf_tables: split async and sync catchall in two
functions
- mptcp: fix possible NULL pointer dereference on close
Current release - new code bugs:
- eth: ice: dpll: fix initial lock status of dpll
Previous releases - regressions:
- bpf: fix precision backtracking instruction iteration
- af_unix: fix use-after-free in unix_stream_read_actor()
- tipc: fix kernel-infoleak due to uninitialized TLV value
- eth: bonding: stop the device in bond_setup_by_slave()
- eth: mlx5:
- fix double free of encap_header
- avoid referencing skb after free-ing in drop path
- eth: hns3: fix VF reset
- eth: mvneta: fix calls to page_pool_get_stats
Previous releases - always broken:
- core: set SOCK_RCU_FREE before inserting socket into hashtable
- bpf: fix control-flow graph checking in privileged mode
- eth: ppp: limit MRU to 64K
- eth: stmmac: avoid rx queue overrun
- eth: icssg-prueth: fix error cleanup on failing initialization
- eth: hns3: fix out-of-bounds access may occur when coalesce info is
read via debugfs
- eth: cortina: handle large frames
Misc:
- selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45"
* tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
macvlan: Don't propagate promisc change to lower dev in passthru
net: sched: do not offload flows with a helper in act_ct
net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
net/mlx5e: Check return value of snprintf writing to fw_version buffer
net/mlx5e: Reduce the size of icosq_str
net/mlx5: Increase size of irq name buffer
net/mlx5e: Update doorbell for port timestamping CQ before the software counter
net/mlx5e: Track xmit submission to PTP WQ after populating metadata map
net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe
net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload
net/mlx5e: Fix pedit endianness
net/mlx5e: fix double free of encap_header in update funcs
net/mlx5e: fix double free of encap_header
net/mlx5: Decouple PHC .adjtime and .adjphase implementations
net/mlx5: DR, Allow old devices to use multi destination FTE
net/mlx5: Free used cpus mask when an IRQ is released
Revert "net/mlx5: DR, Supporting inline WQE when possible"
bpf: Do not allocate percpu memory at init stage
net: Fix undefined behavior in netdev name allocation
dt-bindings: net: ethernet-controller: Fix formatting error
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZVX+TwAKCRCAXGG7T9hj
vmy/AP9E0XUIT05gFVcoyHXsh5VfCd7pu4bSDtf5TRZIpzgV2wD/czHkik77rJ55
kPtFuZ4gEngFVSM8z3C+bKszEWu7rgM=
=Zy37
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.7a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A fix in the Xen events driver avoiding the use of RCU after
the call to rcu_report_dead() when taking a cpu down
- A fix for running as Xen dom0 to line up ACPI's idea of power
management capabilities with the one of Xen
- A cleanup eliminating several kernel-doc warnings in Xen related
code
- A cleanup series of the Xen events driver
* tag 'for-linus-6.7a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: remove some info_for_irq() calls in pirq handling
xen/events: modify internal [un]bind interfaces
xen/events: drop xen_allocate_irqs_dynamic()
xen/events: remove some simple helpers from events_base.c
xen/events: reduce externally visible helper functions
xen/events: remove unused functions
xen/events: fix delayed eoi list handling
xen/shbuf: eliminate 17 kernel-doc warnings
acpi/processor: sanitize _OSC/_PDC capabilities for Xen dom0
xen/events: avoid using info_for_irq() in xen_send_IPI_one()
bugfixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVT1w0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpYXMH/AxTzofnpIJOvmY0QYLbBg3+wu0ml4X1pvJc
Ia2pm5NZLTPucesw+AFM1q8YIiRX5mBRTmxtGLFzqiC+miAKPvMJK2hQe1jlNqgM
7zBb0jeHvURvo4rvDi8a2Xvf6T2ypGapBhmcNy7VtEugLrXGHGMMzjE3IS1/Zsbm
AK70P0ujTpLZtp4TFy2qqZoaikijbAdHhu2GTo1KfFh3RcwSc1uhbrtoTHUQ42bw
0nXz8eLyuu9VmUryVgLy+j9pnS9KDMNhVCpjpVIHD4iI9L6sQVj8fwc/Bnxq8mh7
yDcagvcIK54M786cAmLWC+zQu7feMQ8FcC2zduJT+Yl2X4fX04E=
=xFJf
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix use after free in vhost_vdpa_probe()
virtio_pci: Switch away from deprecated irq_set_affinity_hint
riscv, qemu_fw_cfg: Add support for RISC-V architecture
vdpa_sim_blk: allocate the buffer zeroed
virtio_pci: move structure to a header
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmVVD/4ACgkQ1V2XiooU
IOQegA/9FUHHllNsrk0hUWKeH+1P54jExmKlIhSfwUJ3RptehF0ARb3uQb0rVPuM
DwpaMVZ1lhL3TzcFy1HeCNFU6mKxqKhlvzDYvbRcfbNE96eL7l5RfJwWh0UViwWI
wUtZhznHE6ygdZJ8TZUA+b5vuZkihO2ZNc7rpuBimCQGEXqZfoOpNFVSoNBsWvL5
3s/qq7ai6rl34ipVlPpFO7Gk94EHHMwa4BhGfTNVRSrG2B9EcPAMAOKVDBCPrGST
CdVkkn79ajNUhiKSkD3/JC4fMDavT6ZEIzUMFfwIdF1b7Q+5F64lbZaD5gD2bO30
QAk7ttgq951XnQpLfXC4H4vHdf65GeeYLPSuLqyo/rnkr/+h+hCgnorBwZrzrG3D
mbqQtUZOsJjrH6vcExuHwlM1LEOSGbGuI/zjSTEXEJG8M3qngxXCeMQun2fB8IIN
yTB40SPUhvKlR6JdfJRou/WJj9eKZmyuaWP2MaQT7LFftttt24Ndluoo5KCx92IZ
9LmCm8h93oWKRFAxk3NQQCZbbW0RW8Af+gbmnRI2TjtyDpNrnzPhR3fjopD9wqJH
xMuW5xeTjqdjFR7jvAaYPnnFOOk0vA0JlZlBNmmNIqp04+BmD4RTVqmqwzNCjHvm
KqqWGjKOEYOWN2OJawaqu6V5cU0/untb2OG2b5WAhDycF/CnxA0=
=lwne
-----END PGP SIGNATURE-----
Merge tag 'nf-23-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Remove unused variable causing compilation warning in nft_set_rbtree,
from Yang Li. This unused variable is a left over from previous
merge window.
2) Possible return of uninitialized in nf_conntrack_bridge, from
Linkui Xiao. This is there since nf_conntrack_bridge is available.
3) Fix incorrect pointer math in nft_byteorder, from Dan Carpenter.
Problem has been there since 2016.
4) Fix bogus error in destroy set element command. Problem is there
since this new destroy command was added.
5) Fix race condition in ipset between swap and destroy commands and
add/del/test control plane. This problem is there since ipset was
merged.
6) Split async and sync catchall GC in two function to fix unsafe
iteration over RCU. This is a fix-for-fix that was included in
the previous pull request.
* tag 'nf-23-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: split async and sync catchall in two functions
netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test
netfilter: nf_tables: bogus ENOENT when destroying element which does not exist
netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()
netfilter: nf_conntrack_bridge: initialize err to 0
netfilter: nft_set_rbtree: Remove unused variable nft_net
====================
Link: https://lore.kernel.org/r/20231115184514.8965-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.
[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up
[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.
Fixes: efdbd2b30c ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is no hardware supporting ct helper offload. However, prior to this
patch, a flower filter with a helper in the ct action can be successfully
set into the HW, for example (eth1 is a bnxt NIC):
# tc qdisc add dev eth1 ingress_block 22 ingress
# tc filter add block 22 proto ip flower skip_sw ip_proto tcp \
dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp
# tc filter show dev eth1 ingress
filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_port 21
ct_state -trk
skip_sw
in_hw in_hw_count 1 <----
action order 1: ct zone 0 helper ipv4-tcp-ftp pipe
index 2 ref 1 bind 1
used_hw_stats delayed
This might cause the flower filter not to work as expected in the HW.
This patch avoids this problem by simply returning -EOPNOTSUPP in
tcf_ct_offload_act_setup() to not allow to offload flows with a helper
in act_ct.
Fixes: a21b06e731 ("net: sched: add helper support in act_ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
78 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
78 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
79 | fw_rev_maj(mdev), fw_rev_min(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
80 | fw_rev_sub(mdev), mdev->board_id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: cf83c8fdcd ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
49 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
49 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
51 | mdev->board_id);
| ~~~~~~~~~~~~~~~
Fixes: 84e11edb71 ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".
While here, add a missing space in the formatted string.
This fixes the following build warning:
$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
717 | snprintf(err_str, sizeof(err_str),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 521f31af00 ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without increased buffer size, will trigger -Wformat-truncation with W=1
for the snprintf operation writing to the buffer.
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc':
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32
295 | snprintf(irq->name, MLX5_MAX_IRQ_NAME,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: ada9f5d007 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the
incremented consumer index after the relevant software counters in the
kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to
either overrunning the device CQ or exceeding the expected software buffer
size in the device CQ if the device CQ size was greater than the software
buffer size. Update the relevant software counter only after updating the
device CQ consumer index in the port timestamping napi_poll context.
Log:
mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1
mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04
Fixes: 1880bc4e4a ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SQ is a port timestamping SQ for PTP, do not access tx flags of skb
after free-ing the skb. Free the skb only after all references that depend
on it have been handled in the dropped WQE path.
Fixes: 3178308ad4 ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPSec packet offload in switchdev mode is not supported with LAG,
it's unnecessary to modify those sent-to-vport rules to the peer eswitch.
Fixes: c6c2bf5db4 ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Referenced commit addressed endianness issue in mlx5 pedit implementation
in ad hoc manner instead of systematically treating integer values
according to their types which left pedit fields of sizes not equal to 4
and where the bytes being modified are not least significant ones broken on
big endian machines since wrong bits will be consumed during parsing which
leads to following example error when applying pedit to source and
destination MAC addresses:
[Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0)
[Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............
Treat masks and values of pedit and filter match as network byte order,
refactor pointers to them to void pointers instead of confusing u32
pointers and only cast to pointer-to-integer when reading a value from
them. Treat pedit mlx5_fields->field_mask as host byte order according to
its type u32, change the constants in fields array accordingly.
Fixes: 82198d8bcd ("net/mlx5e: Fix endianness when calculating pedit mask first bit")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow up to the previous patch to fix the same issue for
mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc()
fails.
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: a54e20b4fc ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail.
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: d589e785ba ("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running a phase adjustment operation, the free running clock should
not be modified at all. The phase control keyword is intended to trigger an
internal servo on the device that will converge to the provided delta. A
free running counter cannot implement phase adjustment.
Fixes: 8e11a68e2e ("net/mlx5: Add adjphase function to support hardware-only offset control")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current check isn't aware of old devices that don't have the
relevant FW capability. This patch allows multi destination FTE
in old cards, as it was before this check.
Fixes: f6f46e7173 ("net/mlx5: DR, Add check for multi destination FTE")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each EQ table maintains a cpumask of the already used CPUs that are mapped
to IRQs to ensure that each IRQ gets mapped to a unique CPU.
However, on IRQ release, the said cpumask is not updated by clearing the
CPU from the mask to allow future IRQ request, causing the following
error when a SF is reloaded after it has utilized all CPUs for its IRQs:
mlx5_irq_affinity_request:135:(pid 306010): Didn't find a matching IRQ.
err = -28
Thus, when releasing an IRQ, clear its mapped CPU from the used CPUs
mask, to prevent the case described above.
While at it, move the used cpumask update to the EQ layer as it is more
fitting and preserves symmetricity of the IRQ request/release API.
Fixes: a1772de78d ("net/mlx5: Refactor completion IRQ request/release API")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 95c337cce0.
The revert is required due to the suspicion it cause some tests
fail and will be moved to further investigation.
Fixes: 95c337cce0 ("net/mlx5: DR, Supporting inline WQE when possible")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2023-11-15
We've added 7 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 200 insertions(+), 49 deletions(-).
The main changes are:
1) Do not allocate bpf specific percpu memory unconditionally, from Yonghong.
2) Fix precision backtracking instruction iteration, from Andrii.
3) Fix control flow graph checking, from Andrii.
4) Fix xskxceiver selftest build, from Anders.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Do not allocate percpu memory at init stage
selftests/bpf: add more test cases for check_cfg()
bpf: fix control-flow graph checking in privileged mode
selftests/bpf: add edge case backtracking logic test
bpf: fix precision backtracking instruction iteration
bpf: handle ldimm64 properly in check_cfg()
selftests: bpf: xskxceiver: ksft_print_msg: fix format type error
====================
Link: https://lore.kernel.org/r/20231115214949.48854-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kirill Shutemov reported significant percpu memory consumption increase after
booting in 288-cpu VM ([1]) due to commit 41a5db8d81 ("bpf: Add support for
non-fix-size percpu mem allocation"). The percpu memory consumption is
increased from 111MB to 969MB. The number is from /proc/meminfo.
I tried to reproduce the issue with my local VM which at most supports upto
255 cpus. With 252 cpus, without the above commit, the percpu memory
consumption immediately after boot is 57MB while with the above commit the
percpu memory consumption is 231MB.
This is not good since so far percpu memory from bpf memory allocator is not
widely used yet. Let us change pre-allocation in init stage to on-demand
allocation when verifier detects there is a need of percpu memory for bpf
program. With this change, percpu memory consumption after boot can be reduced
signicantly.
[1] https://lore.kernel.org/lkml/20231109154934.4saimljtqx625l3v@box.shutemov.name/
Fixes: 41a5db8d81 ("bpf: Add support for non-fix-size percpu mem allocation")
Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231111013928.948838-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cited commit removed the strscpy() call and kept the snprintf() only.
It is common to use 'dev->name' as the format string before a netdev is
registered, this results in 'res' and 'name' pointers being equal.
According to POSIX, if copying takes place between objects that overlap
as a result of a call to sprintf() or snprintf(), the results are
undefined.
Add back the strscpy() and use 'buf' as an intermediate buffer.
Fixes: 7ad17b04dc ("net: trust the bitmap in __dev_alloc_name()")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When moving the *-internal-delay-ps properties to only apply for RGMII
interface modes there where a typo in the text formatting.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 3780bb2931.
The cited commit introduced unwanted behavior.
The intent for the commit was to be able to detect carrier loss/gain
for just the NIC connected to the BMC. The unwanted effect is a
carrier loss for auxiliary paths also causes the BMC to lose
carrier. The BMC never regains carrier despite the secondary NIC
regaining a link.
This change, when merged, needs to be backported to stable kernels.
5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable
Fixes: 3780bb2931 ("ncsi: Propagate carrier gain/loss events to the NCSI controller")
CC: stable@vger.kernel.org
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of the IRQ number user the struct irq_info pointer as parameter
in the internal pirq related functions. This allows to drop some calls
of info_for_irq().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Modify the internal bind- and unbind-interfaces to take a struct
irq_info parameter. When allocating a new IRQ pass the pointer from
the allocating function further up.
This will reduce the number of info_for_irq() calls and make the code
more efficient.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Instead of having a common function for allocating a single IRQ or a
consecutive number of IRQs, split up the functionality into the callers
of xen_allocate_irqs_dynamic().
This allows to handle any allocation error in xen_irq_init() gracefully
instead of panicing the system. Let xen_irq_init() return the irq_info
pointer or NULL in case of an allocation error.
Additionally set the IRQ into irq_info already at allocation time, as
otherwise the IRQ would be '0' (which is a valid IRQ number) until
being set.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
