Now kernel.spec and binkernel.spec have the exactly same contents.
Use kernel.spec for binrpm-pkg as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are some cases where we want to run a command with the same
environment variables as Kbuild uses. For example, 'make coccicheck'
invokes scripts/coccicheck from the top Makefile so that the script can
reference to ${LINUXINCLUDE}, ${KBUILD_EXTMOD}, etc. The top Makefile
defines several phony targets that run a script.
We do it also for an internally used script, which results in a somewhat
complex call graph.
One example:
debian/rules binary-arch
-> make intdeb-pkg
-> scripts/package/builddeb
It is also tedious to add a dedicated target like 'intdeb-pkg' for each
use case.
Add a generic target 'run-command' to run an arbitrary command in an
environment with all Kbuild variables set.
The usage is:
$ make run-command KBUILD_RUN_COMMAND=<command>
The concept is similar to:
$ dpkg-architecture -c <command>
This executes <command> in an environment which has all DEB_* variables
defined.
Convert the existing 'make intdeb-pkg'.
Another possible usage is to interrogate a Make variable.
$ make run-command KBUILD_RUN_COMMAND='echo $(KBUILD_CFLAGS)'
might be useful to see KBUILD_CFLAGS set by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This diagnostic checks whether there is a type mismatch when
converting enums (assign an enum of type A to an enum of type B, for
example) and it caught a legit issue recently. The reason it didn't show
is because that warning is enabled only with -Wextra with GCC. Clang,
however, enables it by default.
GCC folks were considering enabling it by default but it was too noisy
back then:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78736
Now that due to clang all those warnings have been fixed, enable it with
GCC too.
allmodconfig tests done with: x86, arm{,64}, powerpc{,64}, riscv
crossbuilds.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Fix stale help text in gconfig
- Support *.S files in compile_commands.json
- Flatten KBUILD_CFLAGS
- Fix external module builds with Rust so that temporary files are
created in the modules directories instead of the kernel tree
-----BEGIN PGP SIGNATURE-----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=BmWs
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix stale help text in gconfig
- Support *.S files in compile_commands.json
- Flatten KBUILD_CFLAGS
- Fix external module builds with Rust so that temporary files are
created in the modules directories instead of the kernel tree
* tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: rust: avoid creating temporary files
kbuild: flatten KBUILD_CFLAGS
gen_compile_commands: add assembly files to compilation database
kconfig: gconfig: correct program name in help text
kconfig: gconfig: drop the Show Debug Info help text
Make it slightly easier to see which compiler options are added and
removed (and not worry about column limit too!).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These are the first few patches in the Scope-based Resource Management
series that introduce the infrastructure but not any conversions as of
yet.
Adding the infrastructure now allows multiple people to start using them.
Of note is that Sparse will need some work since it doesn't yet
understand this attribute and might have decl-after-stmt issues -- but I
think that's being worked on.
-----BEGIN PGP SIGNATURE-----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=adZ8
-----END PGP SIGNATURE-----
Merge tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue
Pull scope-based resource management infrastructure from Peter Zijlstra:
"These are the first few patches in the Scope-based Resource Management
series that introduce the infrastructure but not any conversions as of
yet.
Adding the infrastructure now allows multiple people to start using
them.
Of note is that Sparse will need some work since it doesn't yet
understand this attribute and might have decl-after-stmt issues"
* tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue:
kbuild: Drop -Wdeclaration-after-statement
locking: Introduce __cleanup() based infrastructure
apparmor: Free up __cleanup() name
dmaengine: ioat: Free up __cleanup() name
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error with
the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the linux-image
Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
-----BEGIN PGP SIGNATURE-----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=Rc1z
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
with the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the
linux-image Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
modpost: define more R_ARM_* for old distributions
kbuild: revive "Entering directory" for Make >= 4.4.1
kbuild: set correct abs_srctree and abs_objtree for package builds
scripts/mksysmap: Ignore prefixed KCFI symbols
kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
kbuild: builddeb: always make modules_install, to install modules.builtin*
modpost: continue even with unknown relocation type
modpost: factor out Elf_Sym pointer calculation to section_rel()
modpost: factor out inst location calculation to section_rel()
kbuild: Disable GCOV for *.mod.o
kbuild: Fix CFI failures with GCOV
kbuild: make clean rule robust against too long argument error
script: modpost: emit a warning when the description is missing
kbuild: make modules_install copy modules.builtin(.modinfo)
linux/export.h: rename 'sec' argument to 'license'
modpost: show offset from symbol for section mismatch warnings
modpost: merge two similar section mismatch warnings
kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
modpost: use null string instead of NULL pointer for default namespace
modpost: squash sym_update_namespace() into sym_add_exported()
...
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members
-----BEGIN PGP SIGNATURE-----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=s0j1
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
With commit 9da0763bdd ("kbuild: Use relative path when building in
a subdir of the source tree"), compiler messages in out-of-tree builds
include relative paths, which are relative to the build directory, not
the directory where make was started.
To help IDEs/editors find the source files, Kbuild lets GNU Make print
"Entering directory ..." when it changes the working directory. It has
been working fine for a long time, but David reported it is broken with
the latest GNU Make.
The behavior was changed by GNU Make commit 8f9e7722ff0f ("[SV 63537]
Fix setting -w in makefiles"). Previously, setting --no-print-directory
to MAKEFLAGS only affected child makes, but it is now interpreted in
the current make as soon as it is set.
[test code]
$ cat /tmp/Makefile
ifneq ($(SUBMAKE),1)
MAKEFLAGS += --no-print-directory
all: ; $(MAKE) SUBMAKE=1
else
all: ; :
endif
[before 8f9e7722ff0f]
$ make -C /tmp
make: Entering directory '/tmp'
make SUBMAKE=1
:
make: Leaving directory '/tmp'
[after 8f9e7722ff0f]
$ make -C /tmp
make SUBMAKE=1
:
Previously, the effect of --no-print-directory was delayed until Kbuild
started the directory descending, but it is no longer true with GNU Make
4.4.1.
This commit adds one more recursion to cater to GNU Make >= 4.4.1.
When Kbuild needs to change the working directory, __submake will be
executed twice.
__submake without --no-print-directory --> show "Entering directory ..."
__submake with --no-print-directory --> parse the rest of Makefile
We end up with one more recursion than needed for GNU Make < 4.4.1, but
I do not want to complicate the version check.
Reported-by: David Howells <dhowells@redhat.com>
Closes: https://lore.kernel.org/all/2427604.1686237298@warthog.procyon.org.uk/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <n.schier@avm.de>
When you run 'make rpm-pkg', the rpmbuild tool builds the kernel in
rpmbuild/BUILD, but $(abs_srctree) and $(abs_objtree) point to the
directory path where make was started, not the kernel is actually
being built. The same applies to 'make snap-pkg'. Fix it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With the advent on scope-based resource management it comes really
tedious to abide by the contraints of -Wdeclaration-after-statement.
It will still be recommeneded to place declarations at the start of a
scope where possible, but it will no longer be enforced.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/CAHk-%3Dwi-RyoUhbChiVaJZoZXheAwnJ7OO%3DGxe85BkPAd93TwDA%40mail.gmail.com
Josh Triplett reports that initramfs-tools needs modules.builtin and
modules.builtin.modinfo to create a working initramfs for a non-modular
kernel.
If this is a general tooling issue not limited to Debian, I think it
makes sense to change modules_install.
This commit changes the targets as follows when CONFIG_MODULES=n.
In-tree builds:
make modules -> no-op
make modules_install -> install modules.builtin(.modinfo)
External module builds:
make modules -> show error message like before
make modules_install -> show error message like before
Link: https://lore.kernel.org/lkml/36a4014c73a52af27d930d3ca31d362b60f4461c.1686356364.git.josh@joshtriplett.org/
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
When CONFIG_TRIM_UNUSED_KSYMS is enabled, Kbuild recursively traverses
the directory tree to determine which EXPORT_SYMBOL to trim. If an
EXPORT_SYMBOL turns out to be unused by anyone, Kbuild begins the
second traverse, where some source files are recompiled with their
EXPORT_SYMBOL() tuned into a no-op.
Linus stated negative opinions about this slowness in commits:
- 5cf0fd591f ("Kbuild: disable TRIM_UNUSED_KSYMS option")
- a555bdd0c5 ("Kbuild: enable TRIM_UNUSED_KSYMS again, with some guarding")
We can do this better now. The final data structures of EXPORT_SYMBOL
are generated by the modpost stage, so modpost can selectively emit
KSYMTAB entries that are really used by modules.
Commit f73edc8951 ("kbuild: unify two modpost invocations") is another
ground-work to do this in a one-pass algorithm. With the list of modules,
modpost sets sym->used if it is used by a module. modpost emits KSYMTAB
only for symbols with sym->used==true.
BTW, Nicolas explained why the trimming was implemented with recursion:
https://lore.kernel.org/all/2o2rpn97-79nq-p7s2-nq5-8p83391473r@syhkavp.arg/
Actually, we never achieved that level of optimization where the chain
reaction of trimming comes into play because:
- CONFIG_LTO_CLANG cannot remove any unused symbols
- CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is enabled only for vmlinux,
but not modules
If deeper trimming is required, we need to revisit this, but I guess
that is unlikely to happen.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The -fstrict-flex-arrays=3 option is now available with the release
of GCC 13[1] and Clang 16[2]. This feature instructs the compiler to
treat only C99 flexible arrays as dynamically sized for the purposes of
object size calculations. In other words, the ancient practice of using
1-element arrays, or the GNU extension of using 0-sized arrays, as a
dynamically sized array is disabled. This allows CONFIG_UBSAN_BOUNDS,
CONFIG_FORTIFY_SOURCE, and other object-size aware features to behave
unambiguously in the face of trailing arrays: only C99 flexible arrays
are considered to be dynamically sized. For yet more detail, see:
https://people.kernel.org/kees/bounded-flexible-arrays-in-c
Enabling this will help track down any outstanding cases of fake
flexible arrays that need attention in kernel code.
[1] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html#index-fstrict-flex-arrays
[2] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-fstrict-flex-arrays
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: linux-kbuild@vger.kernel.org
Co-developed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
- Refactor scripts/kallsyms to make it faster and easier to maintain
- Clean up menuconfig
- Provide Clang with hard-coded target triple instead of CROSS_COMPILE
- Use -z pack-relative-relocs flags instead of --use-android-relr-tags
for arm64 CONFIG_RELR
- Add srcdeb-pkg target to build only a Debian source package
- Add KDEB_SOURCE_COMPRESS option to specify the compression for a
Debian source package
- Misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmRM9usVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGg+UQAKbDv/rlBLsdFOWnFgh8IUE58uUb
UF/lmbyPQPZS1+z8WS/ec4ONigPd0gcfjI8klaZuYJ2j5xK0Nf+J8KRQlG9vLCDJ
O0jPV77mKRMkz6UIaa5Dd8MNje8Pn+6T1qev1I9+0dBhyS2csHds3NuDuI/kDehB
V1097moJcTEUGbNWTgnIA3LckIP51OMUgmT94gntcWcTvuGahRmn+Vvn4pijd6rn
r3081wejYl+gZ9DGobRT7yXTsGNkHBHJcmK7VaocAL29haNt+rEULvAC1ABEUkaE
tJMLodybbBiNH441EuUHJBA90yWUxL2EDmTz7kvvYrwem5FsFx6dpuKUXcJpCxW7
x66qOQHrHC7ZY98heMs07TLz+5yMhAseBSGgf6QDSvX7CP20kCgf7q0IikfhByMo
ZWrxj5Zg+P6qoqP5NuoZM4waOarz4wN96OAdB4ao3tbMb0kmzdpvI7W9ZuLaBmEP
iTYm5r6if++a4a09V4WfWOyE0+7TYwSWwl271pIeovZy0p77ulgiYFo8/a9XqKlS
CrUP1r85zkDHYN/RS4DcbXkqa4RnfYUBd/9h/5zAMLOWwGLRets+/xA4sD2QE9nV
xzel3AhVrE3uX0QEPOZnFWTUb5TXkYuhrDxkqRGit61XUeP0Ohy6P1ri8f1dI74J
2huTmg+CZkyfXEff
=UuFY
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Refactor scripts/kallsyms to make it faster and easier to maintain
- Clean up menuconfig
- Provide Clang with hard-coded target triple instead of CROSS_COMPILE
- Use -z pack-relative-relocs flags instead of --use-android-relr-tags
for arm64 CONFIG_RELR
- Add srcdeb-pkg target to build only a Debian source package
- Add KDEB_SOURCE_COMPRESS option to specify the compression for a
Debian source package
- Misc cleanups and fixes
* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: specify targets in debian/rules as .PHONY
sparc: unify sparc32/sparc64 archhelp
kbuild: rpm-pkg: remove kernel-drm PROVIDES
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
kbuild: add srcdeb-pkg target
Makefile: use -z pack-relative-relocs
kbuild: clang: do not use CROSS_COMPILE for target triple
kconfig: menuconfig: reorder functions to remove forward declarations
kconfig: menuconfig: remove unused M_EVENT macro
kconfig: menuconfig: remove OLD_NCURSES macro
kbuild: builddeb: Eliminate debian/arch use
scripts/kallsyms: update the usage in the comment block
scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
scripts/kallsyms: change the output order
scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
scripts/kallsyms: exclude symbols generated by itself dynamically
scripts/mksysmap: use sed with in-line comments
scripts/mksysmap: remove comments described in nm(1)
scripts/kallsyms: remove redundant code for omitting U and N
kallsyms: expand symbol name into comment for debugging
Commit 27f2a4db76 ("Makefile: fix GDB warning with CONFIG_RELR")
added --use-android-relr-tags to fix a GDB warning
BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'
The GDB warning has been fixed in version 11.2.
The DT_ANDROID_RELR tag was deprecated since DT_RELR was standardized.
Thus, --use-android-relr-tags should be removed. While making the
change, try -z pack-relative-relocs, which is supported since LLD 15.
Keep supporting --pack-dyn-relocs=relr as well for older LLD versions.
There is no indication of obsolescence for --pack-dyn-relocs=relr.
As of today, GNU ld supports the latter option for x86 and powerpc64
ports and has no intention to support --pack-dyn-relocs=relr. In the
absence of the glibc symbol version GLIBC_ABI_DT_RELR,
--pack-dyn-relocs=relr and -z pack-relative-relocs are identical in
ld.lld.
GNU ld and newer versions of LLD report warnings (instead of errors) for
unknown -z options. Only errors lead to non-zero exit codes. Therefore,
we should test --pack-dyn-relocs=relr before testing
-z pack-relative-relocs.
Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=a619b58721f0a03fd91c27670d3e4c2fb0d88f1e
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
-----BEGIN PGP SIGNATURE-----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=kdAo
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
* tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use git-archive for source package creation
kbuild: rpm-pkg: move source components to rpmbuild/SOURCES
kbuild: deb-pkg: use dh_listpackages to know enabled packages
kbuild: deb-pkg: split image and debug objects staging out into functions
kbuild: deb-pkg: set CROSS_COMPILE only when undefined
kbuild: deb-pkg: do not take KERNELRELEASE from the source version
kbuild: deb-pkg: make debian source package working again
Makefile: Make kernelrelease target work with M=
kconfig: Update config changed flag before calling callback
kallsyms: add kallsyms_seqs_of_names to list of special symbols
Prepare to add more files to the source RPM.
Also, fix the build error when KCONFIG_CONFIG is set:
error: Bad file: ./.config: No such file or directory
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
That commit required the use of filechk_kernel.release for the
kernelrelease Makefile target. It is currently only being set when
KBUILD_EXTMOD is not set. Make sure it is set in that case as well.
Fixes: 1cb86b6c31 ("kbuild: save overridden KERNELRELEASE in include/config/kernel.release")
Signed-off-by: Tzafrir Cohen <nvidia@cohens.org.il>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Change V=1 option to print both short log and full command log.
- Allow V=1 and V=2 to be combined as V=12.
- Make W=1 detect wrong .gitignore files.
- Tree-wide cleanups for unused command line arguments passed to Clang.
- Stop using -Qunused-arguments with Clang.
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag.
- Create Debian and RPM source packages without cleaning the source tree.
- Various cleanups for packaging.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmP7iHoVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGL/cQAK9q5rsNL5a2LgTbm89ORA+UV+ST
hrAoGo5DkJHUbVH53oPzyLynFBZPvUzLK8yjApjXkyAzy2hXYnj+vbTs0s+JVCFL
owS4NB0YP+tpHGuy8bGpWI0GMZSMwmspUteqxk86zuH8uQVAhnCaeV1/Cr6Aqj1h
2jk1FZid3/h7qEkEgu5U8soeyFnV6VhAT6Ie5yfZ2O2RdsSqPUh6vfKrgdyW4RWz
gito0SOUwvjIDfSmTnIIacUibisPRv2OW29OvmDp1aXj5rMhe3UfOznVE3NR86yl
ZbWDAIm6KYT8V1ASOoAUR80qent9IPKytThLK9BVEQCT6bsujCZMvhYhhEvO30TF
Lzsdr+FrES//xag3+hgc63FEied2xxWGQG1cRtzAhfRL9tJ03+mY1omoW6SyKqW/
Gc9PIcTgQbCIrkeL0HuAI1q3I1vkvHXInJKtGkoHh1J9aJ8v5gQpwGA+DDRUnA+A
LQSeEbT2Hf3MoF4CqZRnConvfhlMuLI+j5v54YPrhokxXmv7u807kjfwMFTiZ/+m
CJFlEMf9YRv3pi8g/AYyGAg5ZQigCwzOCRUC5kguFqzZdgnjiI907GEL804lm1Mg
lpx/HtYPyxwWEd2XyU6/C9AEIl3gm7MBd6b1tD54Tb/VmE+AvjS/O9jFYXZqnAnM
Llv4BfK/cQKwHb6o
=HpFZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip RK3399
PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties
-----BEGIN PGP SIGNATURE-----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=ywsL
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
More core additions, getting closer to a point where the first Rust
modules can be upstreamed. The major ones being:
- Sync: new types 'Arc', 'ArcBorrow' and 'UniqueArc'.
- Types: new trait 'ForeignOwnable' and new type 'ScopeGuard'.
There is also a substantial removal in terms of lines:
- 'alloc' crate: remove the 'borrow' module (type 'Cow' and trait
'ToOwned').
-----BEGIN PGP SIGNATURE-----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=Ora4
-----END PGP SIGNATURE-----
Merge tag 'rust-6.3' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"More core additions, getting closer to a point where the first Rust
modules can be upstreamed. The major ones being:
- Sync: new types 'Arc', 'ArcBorrow' and 'UniqueArc'.
- Types: new trait 'ForeignOwnable' and new type 'ScopeGuard'.
There is also a substantial removal in terms of lines:
- 'alloc' crate: remove the 'borrow' module (type 'Cow' and trait
'ToOwned')"
* tag 'rust-6.3' of https://github.com/Rust-for-Linux/linux:
rust: delete rust-project.json when running make clean
rust: MAINTAINERS: Add the zulip link
rust: types: implement `ForeignOwnable` for `Arc<T>`
rust: types: implement `ForeignOwnable` for the unit type
rust: types: implement `ForeignOwnable` for `Box<T>`
rust: types: introduce `ForeignOwnable`
rust: types: introduce `ScopeGuard`
rust: prelude: prevent doc inline of external imports
rust: sync: add support for dispatching on Arc and ArcBorrow.
rust: sync: introduce `UniqueArc`
rust: sync: allow type of `self` to be `ArcBorrow<T>`
rust: sync: introduce `ArcBorrow`
rust: sync: allow coercion from `Arc<T>` to `Arc<U>`
rust: sync: allow type of `self` to be `Arc<T>` or variants
rust: sync: add `Arc` for ref-counted allocations
rust: compiler_builtins: make stubs non-global
rust: alloc: remove the `borrow` module (`ToOwned`, `Cow`)
In short, the motivation of this commit is to build a source package
without cleaning the source tree.
The deb-pkg and (src)rpm-pkg targets first run 'make clean' before
creating a source tarball. Otherwise build artifacts such as *.o,
*.a, etc. would be included in the tarball. Yet, the tarball ends up
containing several garbage files since 'make clean' does not clean
everything.
Cleaning the tree every time is annoying since it makes the incremental
build impossible. It is desirable to create a source tarball without
cleaning the tree.
In fact, there are some ways to achieve this.
The easiest solution is 'git archive'. 'make perf-tar*-src-pkg' uses
it, but I do not like it because it works only when the source tree is
managed by git, and all files you want in the tarball must be committed
in advance.
I want to make it work without relying on git. We can do this.
Files that are ignored by git are generated files, so should be excluded
from the source tarball. We can list them out by parsing the .gitignore
files. Of course, .gitignore does not cover all the cases, but it works
well enough.
tar(1) claims to support it:
--exclude-vcs-ignores
Exclude files that match patterns read from VCS-specific ignore files.
Supported files are: .cvsignore, .gitignore, .bzrignore, and .hgignore.
The best scenario would be to use 'tar --exclude-vcs-ignores', but this
option does not work. --exclude-vcs-ignore does not understand any of
the negation (!), preceding slash, following slash, etc.. So, this option
is just useless.
Hence, I wrote this gitignore parser. The previous version [1], written
in Python, was so slow. This version is implemented in C, so it works
much faster.
I imported the code from git (commit: 23c56f7bd5f1), so we get the same
result.
This tool traverses the source tree, parsing all .gitignore files, and
prints file paths that are ignored by git.
The output is similar to 'git ls-files --ignored --directory --others
--exclude-per-directory=.gitignore', except
[1] Not sorted
[2] No trailing slash for directories
[2] is intentional because tar's --exclude-from option cannot handle
trailing slashes.
[How to test this tool]
$ git clean -dfx
$ make -s -j$(nproc) defconfig all # or allmodconifg or whatever
$ git archive -o ../linux1.tar --prefix=./ HEAD
$ tar tf ../linux1.tar | LANG=C sort > ../file-list1 # files emitted by 'git archive'
$ make scripts_package
HOSTCC scripts/list-gitignored
$ scripts/list-gitignored --prefix=./ -o ../exclude-list
$ tar cf ../linux2.tar --exclude-from=../exclude-list .
$ tar tf ../linux2.tar | LANG=C sort > ../file-list2 # files emitted by 'tar'
$ diff ../file-list1 ../file-list2 | grep -E '^(<|>)'
< ./Documentation/devicetree/bindings/.yamllint
< ./drivers/clk/.kunitconfig
< ./drivers/gpu/drm/tests/.kunitconfig
< ./drivers/hid/.kunitconfig
< ./fs/ext4/.kunitconfig
< ./fs/fat/.kunitconfig
< ./kernel/kcsan/.kunitconfig
< ./lib/kunit/.kunitconfig
< ./mm/kfence/.kunitconfig
< ./tools/testing/selftests/arm64/tags/
< ./tools/testing/selftests/arm64/tags/.gitignore
< ./tools/testing/selftests/arm64/tags/Makefile
< ./tools/testing/selftests/arm64/tags/run_tags_test.sh
< ./tools/testing/selftests/arm64/tags/tags_test.c
< ./tools/testing/selftests/kvm/.gitignore
< ./tools/testing/selftests/kvm/Makefile
< ./tools/testing/selftests/kvm/config
< ./tools/testing/selftests/kvm/settings
The source tarball contains most of files that are tracked by git. You
see some diffs, but it is just because some .gitignore files are wrong.
$ git ls-files -i -c --exclude-per-directory=.gitignore
Documentation/devicetree/bindings/.yamllint
drivers/clk/.kunitconfig
drivers/gpu/drm/tests/.kunitconfig
drivers/hid/.kunitconfig
fs/ext4/.kunitconfig
fs/fat/.kunitconfig
kernel/kcsan/.kunitconfig
lib/kunit/.kunitconfig
mm/kfence/.kunitconfig
tools/testing/selftests/arm64/tags/.gitignore
tools/testing/selftests/arm64/tags/Makefile
tools/testing/selftests/arm64/tags/run_tags_test.sh
tools/testing/selftests/arm64/tags/tags_test.c
tools/testing/selftests/kvm/.gitignore
tools/testing/selftests/kvm/Makefile
tools/testing/selftests/kvm/config
tools/testing/selftests/kvm/settings
[1]: https://lore.kernel.org/all/20230128173843.765212-1-masahiroy@kernel.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
rust-project.json is the configuration file used by rust-analyzer.
As it is a configuration file and it is not needed to build external
modules, it should be delete by make clean. So, delete rust-project.json
when running make clean.
Link: https://github.com/Rust-for-Linux/linux/issues/939
Suggested-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Finn Behrens <fin@nyantec.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
I added $(srctree)/ to some included Makefiles in the following commits:
- 3204a7fb98 ("kbuild: prefix $(srctree)/ to some included Makefiles")
- d828563955 ("kbuild: do not require sub-make for separate output tree builds")
They were a preparation for removing --include-dir flag.
I have never thought --include-dir useful. Rather, it _is_ harmful.
For example, run the following commands:
$ make -s ARCH=x86 mrproper defconfig
$ make ARCH=arm O=foo dtbs
make[1]: Entering directory '/tmp/linux/foo'
HOSTCC scripts/basic/fixdep
Error: kernelrelease not valid - run 'make prepare' to update it
UPD include/config/kernel.release
make[1]: Leaving directory '/tmp/linux/foo'
The first command configures the source tree for x86. The next command
tries to build ARM device trees in the separate foo/ directory - this
must stop because the directory foo/ has not been configured yet.
However, due to --include-dir=$(abs_srctree), the top Makefile includes
the wrong include/config/auto.conf from the source tree and continues
building. Kbuild traverses the directory tree, but of course it does
not work correctly. The Error message is also pointless - 'make prepare'
does not help at all for fixing the issue.
This commit fixes more arch Makefile, and finally removes --include-dir
from the top Makefile.
There are more breakages under drivers/, but I do not volunteer to fix
them all. I just moved --include-dir to drivers/Makefile.
With this commit, the second command will stop with a sensible message.
$ make -s ARCH=x86 mrproper defconfig
$ make ARCH=arm O=foo dtbs
make[1]: Entering directory '/tmp/linux/foo'
SYNC include/config/auto.conf.cmd
***
*** The source tree is not clean, please run 'make ARCH=arm mrproper'
*** in /tmp/linux
***
make[2]: *** [../Makefile:646: outputmakefile] Error 1
/tmp/linux/Makefile:770: include/config/auto.conf.cmd: No such file or directory
make[1]: *** [/tmp/linux/Makefile:793: include/config/auto.conf.cmd] Error 2
make[1]: Leaving directory '/tmp/linux/foo'
make: *** [Makefile:226: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After commit 8d9acfce33 ("kbuild: Stop using '-Qunused-arguments' with
clang"), the PowerPC vDSO shows the following error with clang-13 and
older when CONFIG_INIT_STACK_ALL_ZERO is enabled:
clang: error: argument unused during compilation: '-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang' [-Werror,-Wunused-command-line-argument]
clang-14 added a change to make sure this flag never triggers
-Wunused-command-line-argument, so it is fixed with newer releases. For
older releases that the kernel still supports building with, just filter
out this flag, as has been done for other flags.
Fixes: f0a42fbab4 ("powerpc/vdso: Improve linker flags")
Fixes: 8d9acfce33 ("kbuild: Stop using '-Qunused-arguments' with clang")
Link: ca6d5813d1
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
