Do not keep the obsolete EDID around after unplugging the display
from the connector.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d20c2f8464 ("drm/ast: sil164: Transparently handle BMC support")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015065113.11790-2-tzimmermann@suse.de
This reverts commit 6c9e14ee9f.
This reverts commit d5070c9b29.
This reverts commit 89c6ea2006.
The VLINE interrupt doesn't work correctly on G200SE-A (at least). We
have also seen missing interrupts on G200ER. So revert vblank support.
Fixes frozen displays and warnings about missed vblanks.
[ 33.818362] [CRTC:34:crtc-0] vblank wait timed out
From the vblank code, the driver only keeps the register constants and
the line that disables all interrupts in mgag200_device_init(). Both
is still useful without vblank handling.
Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/dri-devel/Zvx6lSi7oq5xvTZb@agluck-desk3.sc.intel.com/raw
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015063932.8620-1-tzimmermann@suse.de
Treat each completed full size write to /dev/ttyDBC0 as a separate usb
transfer. Make sure the size of the TRBs matches the size of the tty
write by first queuing as many max packet size TRBs as possible up to
the last TRB which will be cut short to match the size of the tty write.
This solves an issue where userspace writes several transfers back to
back via /dev/ttyDBC0 into a kfifo before dbgtty can find available
request to turn that kfifo data into TRBs on the transfer ring.
The boundary between transfer was lost as xhci-dbgtty then turned
everyting in the kfifo into as many 'max packet size' TRBs as possible.
DbC would then send more data to the host than intended for that
transfer, causing host to issue a babble error.
Refuse to write more data to kfifo until previous tty write data is
turned into properly sized TRBs with data size boundaries matching tty
write size
Tested-by: Uday M Bhat <uday.m.bhat@intel.com>
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some host controllers fail to produce the final completion event on an
isochronous TD which experienced an error mid TD. We deal with it by
flagging such TDs and checking if the next event points at the flagged
TD or at the next one, and giving back the flagged TD if the latter.
This is not enough, because the next TD may be missed by the xHC. Or
there may be no next TD but a ring underrun. We also need to get such
TD quickly out of the way, or errors on later TDs may be handled wrong.
If the next TD experiences a Missed Service Error, we will set the skip
flag on the endpoint and then attempt skipping TDs when yet another
event arrives. In such scenario, we ought to report the 'error mid TD'
transfer as such rather than skip it.
Another problem case are Stopped events. If we see one after an error
mid TD, we naively assume that it's a Force Stopped Event because it
doesn't match the pending TD, but in reality it might be an ordinary
Stopped event for the next TD, which we fail to recognize and handle.
Fix this by moving error mid TD handling before the whole TD skipping
loop. Remove unnecessary conditions, always give back the TD if the new
event points to any TRB outside it or if the pointer is NULL, as may be
the case in Ring Underrun and Overrun events on 1st gen hardware. Only
if the pending TD isn't flagged, consider other actions like skipping.
As a side effect of reordering with skip and FSE cases, error mid TD is
reordered with last_td_was_short check. This is harmless, because the
two cases are mutually exclusive - only one can happen in any given run
of handle_tx_event().
Tested on the NEC host and a USB camera with flaky cable. Dynamic debug
confirmed that Transaction Errors are sometimes seen, sometimes mid-TD,
sometimes followed by Missed Service. In such cases, they were finished
properly before skipping began.
[Rebase on 6.12-rc1 -Mathias]
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid xHC host from processing a cancelled URB by always turning
cancelled URB TDs into no-op TRBs before queuing a 'Set TR Deq' command.
If the command fails then xHC will start processing the cancelled TD
instead of skipping it once endpoint is restarted, causing issues like
Babble error.
This is not a complete solution as a failed 'Set TR Deq' command does not
guarantee xHC TRB caches are cleared.
Fixes: 4db356924a ("xhci: turn cancelled td cleanup to its own function")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The stream contex type (SCT) bitfield is used both in the stream context
data structure, and in the 'Set TR Dequeue pointer' command TRB.
In both cases it uses bits 3:1
The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field
for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value
1 bit left before masking the three bits.
Fix this by first masking and rshifting, just like the similar
SCT_FOR_CTX(p) macro does
This issue has not been visibile as the lost bit 3 is only used with
secondary stream arrays (SSA). Xhci driver currently only supports using
a primary stream array with Linear stream addressing.
Fixes: 95241dbdf8 ("xhci: Set SCT field for Set TR dequeue on streams")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syzbot fuzzer has been encountering "task hung" problems ever
since the dummy-hcd driver was changed to use hrtimers instead of
regular timers. It turns out that the problems are caused by a subtle
difference between the timer_pending() and hrtimer_active() APIs.
The changeover blindly replaced the first by the second. However,
timer_pending() returns True when the timer is queued but not when its
callback is running, whereas hrtimer_active() returns True when the
hrtimer is queued _or_ its callback is running. This difference
occasionally caused dummy_urb_enqueue() to think that the callback
routine had not yet started when in fact it was almost finished. As a
result the hrtimer was not restarted, which made it impossible for the
driver to dequeue later the URB that was just enqueued. This caused
usb_kill_urb() to hang, and things got worse from there.
Since hrtimers have no API for telling when they are queued and the
callback isn't running, the driver must keep track of this for itself.
That's what this patch does, adding a new "timer_pending" flag and
setting or clearing it at the appropriate times.
Reported-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/6709234e.050a0220.3e960.0011.GAE@google.com/
Tested-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: a7f3813e58 ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/2dab644e-ef87-4de8-ac9a-26f100b2c609@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 160c826b4d ("selftest: hid: add missing run-hid-tools-tests.sh")
has added the run-hid-tools-tests.sh script for it to be installed, but
I forgot to add the tests directory together.
If running the test case without the tests directory, will results in
the following error message:
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -t hid:hid-core.sh
/usr/lib/python3.11/site-packages/_pytest/config/__init__.py:331: PluggyTeardownRaisedWarning: A plugin raised an exception during an old-style hookwrapper teardown.
Plugin: helpconfig, Hook: pytest_cmdline_parse
UsageError: usage: __main__.py [options] [file_or_dir] [file_or_dir] [...]
__main__.py: error: unrecognized arguments: --udevd
inifile: None
rootdir: /root/linux/kselftest_install/hid
In fact, the run-hid-tools-tests.sh script uses the scripts in the tests
directory to run tests. The tests directory also needs to be added to be
installed.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Cc: stable@vger.kernel.org
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Several miscellaneous fixes:
- Many bnxt_re bug fixes - Memory leaks, kasn, NULL pointer deref, soft
lockups, error unwinding and some small functional issues
- Error unwind bug in rdma netlink
- Two issues with incorrect VLAN detection for iWarp
- skb_splice_from_iter() splat in siw
- Give SRP slab caches unique names to resolve the merge window WARN_ON
regression
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZw/9ZAAKCRCFwuHvBreF
Yez7AQCAcC4NB1HYMnYiFIn9GPtxVaqTt+VOIK9h/5mIMGDGMAD8DX+3sOqBLlDX
ZLi/2Se8gej+yoWRqSskrc2Pv2Mfoww=
=ryK4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several miscellaneous fixes. A lot of bnxt_re activity, there will be
more rc patches there coming.
- Many bnxt_re bug fixes - Memory leaks, kasn, NULL pointer deref,
soft lockups, error unwinding and some small functional issues
- Error unwind bug in rdma netlink
- Two issues with incorrect VLAN detection for iWarp
- skb_splice_from_iter() splat in siw
- Give SRP slab caches unique names to resolve the merge window
WARN_ON regression"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Fix the GID table length
RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages
RDMA/bnxt_re: Change the sequence of updating the CQ toggle value
RDMA/bnxt_re: Fix an error path in bnxt_re_add_device
RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop
RDMA/bnxt_re: Fix a possible NULL pointer dereference
RDMA/bnxt_re: Return more meaningful error
RDMA/bnxt_re: Fix incorrect dereference of srq in async event
RDMA/bnxt_re: Fix out of bound check
RDMA/bnxt_re: Fix the max CQ WQEs for older adapters
RDMA/srpt: Make slab cache names unique
RDMA/irdma: Fix misspelling of "accept*"
RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP
RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES
RDMA/core: Fix ENODEV error for iWARP test over vlan
RDMA/nldev: Fix NULL pointer dereferences issue in rdma_nl_notify_event
RDMA/bnxt_re: Fix the max WQEs used in Static WQE mode
RDMA/bnxt_re: Add a check for memory allocation
RDMA/bnxt_re: Fix incorrect AVID type in WQE structure
RDMA/bnxt_re: Fix a possible memory leak
-----BEGIN PGP SIGNATURE-----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=tFDD
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.12-2024-10-16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge an amd-pstate driver fix for 6.12-rc4 from Mario Limonciello:
"Fix a regression introduced where boost control malfunctioned in
amd-pstate"
* tag 'amd-pstate-v6.12-2024-10-16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:
kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout
According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:
'When an interrupt transfer involves more data than can fit in one
data payload of the currently established maximum size, all data
payloads are required to be maximum-sized except for the last data
payload, which will contain the remaining data. An interrupt transfer
is complete when the endpoint does one of the following:
• Has transferred exactly the amount of data expected
• Transfers a packet with a payload size less than wMaxPacketSize or
transfers a zero-length packet'
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365
Fixes: 7b05933340 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's issue as follows:
KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W
RIP: 0010:proto_unregister+0xee/0x400
Call Trace:
<TASK>
__do_sys_delete_module+0x318/0x580
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init()
will cleanup all resource. Then when remove bnep module will call
bnep_sock_cleanup() to cleanup sock's resource.
To solve above issue just return bnep_sock_init()'s return value in
bnep_exit().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This partially reverts 81b3e33bb054 ("Bluetooth: btusb: Don't fail
external suspend requests") as it introduced a call to hci_suspend_dev
that assumes the system-suspend which doesn't work well when just the
device is being suspended because wakeup flag is only set for remote
devices that can wakeup the system.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Kenneth Crudup <kenny@panix.com>
Fixes: 610712298b ("Bluetooth: btusb: Don't fail external suspend requests")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Rafael J. Wysocki <rafael@kernel.org>
If iso_init() has been called, iso_exit() must be called on module
unload. Without that, the struct proto that iso_init() registered with
proto_register() becomes invalid, which could cause unpredictable
problems later. In my case, with CONFIG_LIST_HARDENED and
CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually
triggers this BUG():
list_add corruption. next->prev should be prev (ffffffffb5355fd0),
but was 0000000000000068. (next=ffffffffc0a010d0).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x61/0xa0
...
__list_add_valid_or_report+0x61/0xa0
proto_register+0x299/0x320
hci_sock_init+0x16/0xc0 [bluetooth]
bt_init+0x68/0xd0 [bluetooth]
__pfx_bt_init+0x10/0x10 [bluetooth]
do_one_initcall+0x80/0x2f0
do_init_module+0x8b/0x230
__do_sys_init_module+0x15f/0x190
do_syscall_64+0x68/0x110
...
Cc: stable@vger.kernel.org
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If bt_debugfs is not created successfully, which happens if either
CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init()
returns early and does not set iso_inited to true. This means that a
subsequent call to iso_init() will result in duplicate calls to
proto_register(), bt_sock_register(), etc.
With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the
duplicate call to proto_register() triggers this BUG():
list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250,
next=ffffffffc0b280d0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x9a/0xa0
...
__list_add_valid_or_report+0x9a/0xa0
proto_register+0x2b5/0x340
iso_init+0x23/0x150 [bluetooth]
set_iso_socket_func+0x68/0x1b0 [bluetooth]
kmem_cache_free+0x308/0x330
hci_sock_sendmsg+0x990/0x9e0 [bluetooth]
__sock_sendmsg+0x7b/0x80
sock_write_iter+0x9a/0x110
do_iter_readv_writev+0x11d/0x220
vfs_writev+0x180/0x3e0
do_writev+0xca/0x100
...
This change removes the early return. The check for iso_debugfs being
NULL was unnecessary, it is always NULL when iso_inited is false.
Cc: stable@vger.kernel.org
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=DEUA
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- regression fix: dirty extents tracked in xarray for qgroups must be
adjusted for 32bit platforms
- fix potentially freeing uninitialized name in fscrypt structure
- fix warning about unneeded variable in a send callback
* tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
btrfs: send: cleanup unneeded return variable in changed_verity()
btrfs: fix uninitialized pointer free in add_inode_ref()
btrfs: use sector numbers as keys for the dirty extents xarray
-----BEGIN PGP SIGNATURE-----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=WhJj
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix race between session setup and session logoff
- add supplementary group support
* tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for supplementary groups
ksmbd: fix user-after-free from session log off
This fix correctly populates the `bpf_link_info.netfilter.flags` field
when user passes the `BPF_F_NETFILTER_IP_DEFRAG` flag.
Fixes: 91721c2d02 ("netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Florian Westphal <fw@strlen.de>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20241011193252.178997-1-wudevelops@gmail.com
UBLK_F_USER_COPY requires userspace to call write() on ublk char
device for filling request buffer, and unprivileged device can't
be trusted.
So don't allow user copy for unprivileged device.
Cc: stable@vger.kernel.org
Fixes: 1172d5b8be ("ublk: support user copy")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241016134847.2911721-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On display ver 20 onwards tile4 is not supported with horizontal flip
Bspec: 69853
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007182841.2104740-1-juhapekka.heikkila@gmail.com
(cherry picked from commit 73e8e2f9a358caa005ed6e52dcb7fa2bca59d132)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The BSpec says that EN_L3_RW_CCS_CACHE_FLUSH must be toggled
on for manual global invalidation to take effect and actually flush
device cache, however this also turns on flushing for things like
pipecontrol, which occurs between submissions for compute/render. This
sounds like massive overkill for our needs, where we already have the
manual flushing on the display side with the global invalidation. Some
observations on BMG:
1. Disabling l2 caching for host writes and stubbing out the driver
global invalidation but keeping EN_L3_RW_CCS_CACHE_FLUSH enabled, has
no impact on wb-transient-vs-display IGT, which makes sense since the
pipecontrol is now flushing the device cache after the render copy.
Without EN_L3_RW_CCS_CACHE_FLUSH the test then fails, which is also
expected since device cache is now dirty and display engine can't see
the writes.
2. Disabling EN_L3_RW_CCS_CACHE_FLUSH, but keeping the driver global
invalidation also has no impact on wb-transient-vs-display. This
suggests that the global invalidation still works as expected and is
flushing the device cache without EN_L3_RW_CCS_CACHE_FLUSH turned on.
With that drop EN_L3_RW_CCS_CACHE_FLUSH. This helps some workloads since
we no longer flush the device cache between submissions as part of
pipecontrol.
Edit: We now also have clarification from HW side that BSpec was indeed
wrong here.
v2:
- Rebase and update commit message.
BSpec: 71718
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Vitasta Wattal <vitasta.wattal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007074541.33937-2-matthew.auld@intel.com
(cherry picked from commit 67ec9f87bd6c57db1251bb2244d242f7ca5a0b6a)
[ Fix conflict due to changed xe_mmio_write32() signature ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We can incorrectly think that the fence has signalled, if we get a
non-zero value here from the kmalloc, which is quite plausible. Just use
kzalloc to prevent stuff like this.
Fixes: 977e5b82e0 ("drm/xe: Expose user fence from xe_sync_entry")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011133633.388008-2-matthew.auld@intel.com
(cherry picked from commit 26f69e88dcc95fffc62ed2aea30ad7b1fdf31fdb)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
do_comapre() can return success after a timedout wait_woken() which was
treated as -ETIME. The loop calling wait_woken() sets correct err so
there is no need to re-evaluate err.
v2: Remove entire check that reevaluate err at the end(Matt)
Fixes: e670f0b4ef ("drm/xe/uapi: Return correct error code for xe_wait_user_fence_ioctl")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1630
Cc: stable@vger.kernel.org # v6.8+
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011151029.4160630-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit ec7e6a1d527755fc3c7a3303eaa5577aac5cf6be)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fix external BO's dma-resv usage in exec IOCTL using bookkeep slots
rather than write slots. This leaves syncing to user space rather than
the KMD blindly enforcing write semantics on every external BO.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Kenneth Graunke <kenneth.w.graunke@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reported-by: Simona Vetter <simona.vetter@ffwll.ch>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2673
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911152622.903058-1-matthew.brost@intel.com
(cherry picked from commit b8b1163248759ba18509f7443a2d19b15b4c1df8)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Starting with Xe2 the timestamp is a full 64 bit counter, contrary to
the 36 bit that was available before. Although 36 should be sufficient
for any reasonable delta calculation (for Xe2, of about 30min), it's
surprising to userspace to get something truncated. Also if the
timestamp being compared to is coming from the GPU and the application
is not careful enough to apply the width there, a delta calculation
would be wrong.
Extend it to full 64-bits starting with Xe2.
v2: Expand width=64 to media gt, as it's just a wrong tagging in the
spec - empirical tests show it goes beyond 36 bits and match the engines
for the main gt
Bspec: 60411
Cc: Szymon Morek <szymon.morek@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011035618.1057602-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 9d559cdcb21f42188d4c3ff3b4fe42b240f4af5d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Freeing job in TDR is not safe as TDR can pass the run_job thread
resulting in UAF. It is only safe for free job to naturally be called by
the scheduler. Rather free job in TDR, add to pending list.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2811
Cc: Matthew Auld <matthew.auld@intel.com>
Fixes: e275d61c5f ("drm/xe/guc: Handle timing out of signaled jobs gracefully")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003001657.3517883-3-matthew.brost@intel.com
(cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
A fragile micro optimization in xe_sched_add_pending_job relied on both
the GPU scheduler being stopped and fence signaling stopped to safely
add a job to the pending list without the job list lock in
xe_sched_add_pending_job. Remove this optimization and just take the job
list lock.
Fixes: 7ddb9403dd ("drm/xe: Sample ctx timestamp to determine if jobs have timed out")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003001657.3517883-2-matthew.brost@intel.com
(cherry picked from commit 90521df5fc43980e4575bd8c5b1cb62afe1a9f5f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Technically the or_reset() means we call the action on failure, however
that would lead to unbalanced rpm put(). Move the get() earlier to fix
this. It should be extremely unlikely to ever trigger this in practice.
Fixes: 90936a0a4c ("drm/xe: Don't suspend device upon wedge")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-4-matthew.auld@intel.com
(cherry picked from commit a187c1b0a800565a4db6372268692aff99df7f53)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently we can call fence_fini() twice if something goes wrong when
sending the GuC CT for the tlb request, since we signal the fence and
return an error, leading to the caller also calling fini() on the error
path in the case of stack version of the flow, which leads to an extra
rpm put() which might later cause device to enter suspend when it
shouldn't. It looks like we can just drop the fini() call since the
fence signaller side will already call this for us.
There are known mysterious splats with device going to sleep even with
an rpm ref, and this could be one candidate.
v2 (Matt B):
- Prefer warning if we detect double fini()
Fixes: f002702290 ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-3-matthew.auld@intel.com
(cherry picked from commit cfcbc0520d5055825f0647ab922b655688605183)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add workaround (wa) 15016589081 which applies to Xe2_v3_LPG_MD.
Xe2_v3_LPG_MD is a Lunar Lake platform with GFX version: 20.04.
This wa is type: permanent, and hence is applicable on all steppings.
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009065542.283151-1-aradhya.bhatia@intel.com
(cherry picked from commit 8fb1da9f9bfb02f710a7f826d50781b0b030cf53)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().
Fixes: 38cfb5a45e ("blk-wbt: improve waking of tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For placeholder buffers, &dummy_ubuf is assigned which is a static
value. When buffers are attempted cloned, don't attempt to grab a
reference to it, as we both don't need it and it'll actively fail as
dummy_ubuf doesn't have a valid reference count setup.
Link: https://lore.kernel.org/io-uring/Zw8dkUzsxQ5LgAJL@ly-workstation/
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Fixes: 7cc2a6eadc ("io_uring: add IORING_REGISTER_COPY_BUFFERS method")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Syzbot reported that after nilfs2 reads a corrupted file system image
and degrades to read-only, the BUG_ON check for the buffer delay flag
in submit_bh_wbc() may fail, causing a kernel bug.
This is because the buffer delay flag is not cleared when clearing the
buffer state flags to discard a page/folio or a buffer head. So, fix
this.
This became necessary when the use of nilfs2's own page clear routine
was expanded. This state inconsistency does not occur if the buffer
is written normally by log writing.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Link: https://lore.kernel.org/r/20241015213300.7114-1-konishi.ryusuke@gmail.com
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Reported-by: syzbot+985ada84bf055a575c07@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=985ada84bf055a575c07
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
If an MST branch device doesn't support DSC for a given mode, but the
MST link has enough BW for the mode, assume that the branch device does
support the mode using an uncompressed stream.
Fixes: 55eaef1641 ("drm/i915/dp_mst: Handle the Synaptics HBlank expansion quirk")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009110135.1216498-2-imre.deak@intel.com
(cherry picked from commit 4e75c3e208a06ad6fd9b3517fb77337460d7c2b0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The MST branch device may not support the number of DSC slices a mode
requires, handle the error in this case.
Fixes: 4e0837a8d0 ("drm/i915/dp_mst: Account for FEC and DSC overhead during BW allocation")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009110135.1216498-1-imre.deak@intel.com
(cherry picked from commit 802a69b6b8a0502a9e2309afec7e1b77f67874f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Also initialize regs->psw.mask in perf_arch_fetch_caller_regs().
This way user_mode(regs) will return false, like it should.
It looks like all current users initialize regs to zero, so that this
doesn't fix a bug currently. However it is better to not rely on callers
to do this.
Fixes: 914d52e464 ("s390: implement perf_arch_fetch_caller_regs")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
According to the VT220 specification the possible character combinations
sent on RETURN are only CR or CRLF [0].
The Return key sends either a CR character (0/13) or a CR
character (0/13) and an LF character (0/10), depending on the
set/reset state of line feed/new line mode (LNM).
The sclp/vt220 driver however uses LFCR. This can confuse tools, for
example the kunit runner.
Link: https://vt100.net/docs/vt220-rm/chapter3.html#S3.2
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-2-941defa765a6@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
On reboot the SCLP interface is deactivated through a reboot notifier.
This happens before other components using SCLP have the chance to run
their own reboot notifiers.
Two of those components are the SCLP console and tty drivers which try
to flush the last outstanding messages.
At that point the SCLP interface is already unusable and the messages
are discarded.
Execute sclp_deactivate() as late as possible to avoid this issue.
Fixes: 4ae46db99c ("s390/consoles: improve panic notifiers reliability")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-1-941defa765a6@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The key_to_protkey handler function in module pkey_pckmo should return
with success on all known protected key types, including the new types
introduced by fd197556ee ("s390/pkey: Add AES xts and HMAC clear key
token support").
Fixes: fd197556ee ("s390/pkey: Add AES xts and HMAC clear key token support")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The cached version avoids redundant commands to the codec, improving
stability and reducing unnecessary operations. This change ensures
better power management and reliable restoration of pin configurations,
especially after hibernation (S4) and other power transitions.
Fixes: 9988844c45 ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2")
Suggested-by: Kai-Heng Feng <kaihengf@nvidia.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The configfs store callback should return the number of bytes consumed
not the total number of bytes we actually stored. These could differ if
for example the passed in string had a newline we did not store.
If the returned value does not match the number of bytes written the
writer might assume a failure or keep trying to write the remaining bytes.
For example the following command will hang trying to write the final
newline over and over again (tested on bash 2.05b):
echo foo > function_name
Fixes: 993a44fa85 ("usb: gadget: f_uac2: allow changing interface name via configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Link: https://lore.kernel.org/r/20241006232637.4267-1-kgroeneveld@lenbrook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
