mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:41:42 +00:00
hwmon: Add sophgo SG2042 external hardware monitor support
SG2042 use an external MCU to provide basic hardware information and thermal sensors. Add driver support for the onboard MCU of SG2042. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Message-ID: <IA1PR20MB49536C786048D1E676BB9C20BB822@IA1PR20MB4953.namprd20.prod.outlook.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Inochi Amaoto
Guenter Roeck
parent
87798d9f70
commit
758b62e562
@ -206,6 +206,7 @@ Hardware Monitoring Kernel Drivers
|
||||
sch5636
|
||||
scpi-hwmon
|
||||
sfctemp
|
||||
sg2042-mcu
|
||||
sht15
|
||||
sht21
|
||||
sht3x
|
||||
|
||||
78
Documentation/hwmon/sg2042-mcu.rst
Normal file
78
Documentation/hwmon/sg2042-mcu.rst
Normal file
@ -0,0 +1,78 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
Kernel driver sg2042-mcu
|
||||
========================
|
||||
|
||||
Supported chips:
|
||||
|
||||
* Onboard MCU for sg2042
|
||||
|
||||
Addresses scanned: -
|
||||
|
||||
Prefix: 'sg2042-mcu'
|
||||
|
||||
Authors:
|
||||
|
||||
- Inochi Amaoto <inochiama@outlook.com>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver supprts hardware monitoring for onboard MCU with
|
||||
i2c interface.
|
||||
|
||||
Usage Notes
|
||||
-----------
|
||||
|
||||
This driver does not auto-detect devices. You will have to instantiate
|
||||
the devices explicitly.
|
||||
Please see Documentation/i2c/instantiating-devices.rst for details.
|
||||
|
||||
Sysfs Attributes
|
||||
----------------
|
||||
|
||||
The following table shows the standard entries support by the driver:
|
||||
|
||||
================= =====================================================
|
||||
Name Description
|
||||
================= =====================================================
|
||||
temp1_input Measured temperature of SoC
|
||||
temp1_crit Critical high temperature
|
||||
temp1_crit_hyst hysteresis temperature restore from Critical
|
||||
temp2_input Measured temperature of the base board
|
||||
================= =====================================================
|
||||
|
||||
The following table shows the extra entries support by the driver
|
||||
(the MCU device is in i2c subsystem):
|
||||
|
||||
================= ======= =============================================
|
||||
Name Perm Description
|
||||
================= ======= =============================================
|
||||
reset_count RO Reset count of the SoC
|
||||
uptime RO Seconds after the MCU is powered
|
||||
reset_reason RO Reset reason for the last reset
|
||||
repower_policy RW Execution policy when triggering repower
|
||||
================= ======= =============================================
|
||||
|
||||
``repower_policy``
|
||||
The repower is triggered when the temperature of the SoC falls below
|
||||
the hysteresis temperature after triggering a shutdown due to
|
||||
reaching the critical temperature.
|
||||
The valid values for this entry are "repower" and "keep". "keep" will
|
||||
leave the SoC down when the triggering repower, and "repower" will
|
||||
boot the SoC.
|
||||
|
||||
Debugfs Interfaces
|
||||
------------------
|
||||
|
||||
If debugfs is available, this driver exposes some hardware specific
|
||||
data in ``/sys/kernel/debug/sg2042-mcu/*/``.
|
||||
|
||||
================= ======= =============================================
|
||||
Name Format Description
|
||||
================= ======= =============================================
|
||||
firmware_version 0x%02x firmware version of the MCU
|
||||
pcb_version 0x%02x version number of the base board
|
||||
board_type 0x%02x identifiers for the base board
|
||||
mcu_type %d type of the MCU: 0 is STM32, 1 is GD32
|
||||
================= ======= =============================================
|
||||
@ -2068,6 +2068,17 @@ config SENSORS_SFCTEMP
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called sfctemp.
|
||||
|
||||
config SENSORS_SG2042_MCU
|
||||
tristate "Sophgo onboard MCU support"
|
||||
depends on I2C
|
||||
depends on ARCH_SOPHGO || COMPILE_TEST
|
||||
help
|
||||
Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides
|
||||
power control and some basic information.
|
||||
|
||||
This driver can be built as a module. If so, the module
|
||||
will be called sg2042-mcu.
|
||||
|
||||
config SENSORS_SURFACE_FAN
|
||||
tristate "Surface Fan Driver"
|
||||
depends on SURFACE_AGGREGATOR
|
||||
|
||||
@ -194,6 +194,7 @@ obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
|
||||
obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
|
||||
obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o
|
||||
obj-$(CONFIG_SENSORS_SFCTEMP) += sfctemp.o
|
||||
obj-$(CONFIG_SENSORS_SG2042_MCU) += sg2042-mcu.o
|
||||
obj-$(CONFIG_SENSORS_SL28CPLD) += sl28cpld-hwmon.o
|
||||
obj-$(CONFIG_SENSORS_SHT15) += sht15.o
|
||||
obj-$(CONFIG_SENSORS_SHT21) += sht21.o
|
||||
|
||||
388
drivers/hwmon/sg2042-mcu.c
Normal file
388
drivers/hwmon/sg2042-mcu.c
Normal file
@ -0,0 +1,388 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (c) 2024 Inochi Amaoto <inochiama@outlook.com>
|
||||
*
|
||||
* Sophgo power control mcu for SG2042
|
||||
*/
|
||||
|
||||
#include <linux/cleanup.h>
|
||||
#include <linux/debugfs.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mutex.h>
|
||||
|
||||
/* fixed MCU registers */
|
||||
#define REG_BOARD_TYPE 0x00
|
||||
#define REG_MCU_FIRMWARE_VERSION 0x01
|
||||
#define REG_PCB_VERSION 0x02
|
||||
#define REG_PWR_CTRL 0x03
|
||||
#define REG_SOC_TEMP 0x04
|
||||
#define REG_BOARD_TEMP 0x05
|
||||
#define REG_RST_COUNT 0x0a
|
||||
#define REG_UPTIME 0x0b
|
||||
#define REG_RESET_REASON 0x0d
|
||||
#define REG_MCU_TYPE 0x18
|
||||
#define REG_REPOWER_POLICY 0x65
|
||||
#define REG_CRITICAL_TEMP 0x66
|
||||
#define REG_REPOWER_TEMP 0x67
|
||||
|
||||
#define REPOWER_POLICY_REBOOT 1
|
||||
#define REPOWER_POLICY_KEEP_OFF 2
|
||||
|
||||
#define MCU_POWER_MAX 0xff
|
||||
|
||||
#define DEFINE_MCU_DEBUG_ATTR(_name, _reg, _format) \
|
||||
static int _name##_show(struct seq_file *seqf, \
|
||||
void *unused) \
|
||||
{ \
|
||||
struct sg2042_mcu_data *mcu = seqf->private; \
|
||||
int ret; \
|
||||
ret = i2c_smbus_read_byte_data(mcu->client, (_reg)); \
|
||||
if (ret < 0) \
|
||||
return ret; \
|
||||
seq_printf(seqf, _format "\n", ret); \
|
||||
return 0; \
|
||||
} \
|
||||
DEFINE_SHOW_ATTRIBUTE(_name) \
|
||||
|
||||
struct sg2042_mcu_data {
|
||||
struct i2c_client *client;
|
||||
struct dentry *debugfs;
|
||||
struct mutex mutex;
|
||||
};
|
||||
|
||||
static struct dentry *sgmcu_debugfs;
|
||||
|
||||
static ssize_t reset_count_show(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(mcu->client, REG_RST_COUNT);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return sprintf(buf, "%d\n", ret);
|
||||
}
|
||||
|
||||
static ssize_t uptime_show(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
|
||||
u8 time_val[2];
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_i2c_block_data(mcu->client, REG_UPTIME,
|
||||
sizeof(time_val), time_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return sprintf(buf, "%d\n",
|
||||
(time_val[0]) | (time_val[1] << 8));
|
||||
}
|
||||
|
||||
static ssize_t reset_reason_show(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(mcu->client, REG_RESET_REASON);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return sprintf(buf, "0x%02x\n", ret);
|
||||
}
|
||||
|
||||
static ssize_t repower_policy_show(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
const char *action;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(mcu->client, REG_REPOWER_POLICY);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (ret == REPOWER_POLICY_REBOOT)
|
||||
action = "repower";
|
||||
else if (ret == REPOWER_POLICY_KEEP_OFF)
|
||||
action = "keep";
|
||||
else
|
||||
action = "unknown";
|
||||
|
||||
return sprintf(buf, "%s\n", action);
|
||||
}
|
||||
|
||||
static ssize_t repower_policy_store(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
|
||||
u8 value;
|
||||
int ret;
|
||||
|
||||
if (sysfs_streq("repower", buf))
|
||||
value = REPOWER_POLICY_REBOOT;
|
||||
else if (sysfs_streq("keep", buf))
|
||||
value = REPOWER_POLICY_KEEP_OFF;
|
||||
else
|
||||
return -EINVAL;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(mcu->client,
|
||||
REG_REPOWER_POLICY, value);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR_RO(reset_count);
|
||||
static DEVICE_ATTR_RO(uptime);
|
||||
static DEVICE_ATTR_RO(reset_reason);
|
||||
static DEVICE_ATTR_RW(repower_policy);
|
||||
|
||||
DEFINE_MCU_DEBUG_ATTR(firmware_version, REG_MCU_FIRMWARE_VERSION, "0x%02x");
|
||||
DEFINE_MCU_DEBUG_ATTR(pcb_version, REG_PCB_VERSION, "0x%02x");
|
||||
DEFINE_MCU_DEBUG_ATTR(board_type, REG_BOARD_TYPE, "0x%02x");
|
||||
DEFINE_MCU_DEBUG_ATTR(mcu_type, REG_MCU_TYPE, "%d");
|
||||
|
||||
static struct attribute *sg2042_mcu_attrs[] = {
|
||||
&dev_attr_reset_count.attr,
|
||||
&dev_attr_uptime.attr,
|
||||
&dev_attr_reset_reason.attr,
|
||||
&dev_attr_repower_policy.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct attribute_group sg2042_mcu_attr_group = {
|
||||
.attrs = sg2042_mcu_attrs,
|
||||
};
|
||||
|
||||
static const struct attribute_group *sg2042_mcu_groups[] = {
|
||||
&sg2042_mcu_attr_group,
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct hwmon_channel_info * const sg2042_mcu_info[] = {
|
||||
HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
|
||||
HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_CRIT |
|
||||
HWMON_T_CRIT_HYST,
|
||||
HWMON_T_INPUT),
|
||||
NULL
|
||||
};
|
||||
|
||||
static int sg2042_mcu_read(struct device *dev,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long *val)
|
||||
{
|
||||
struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
|
||||
int tmp;
|
||||
u8 reg;
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_temp_input:
|
||||
reg = channel ? REG_BOARD_TEMP : REG_SOC_TEMP;
|
||||
break;
|
||||
case hwmon_temp_crit:
|
||||
reg = REG_CRITICAL_TEMP;
|
||||
break;
|
||||
case hwmon_temp_crit_hyst:
|
||||
reg = REG_REPOWER_TEMP;
|
||||
break;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
||||
tmp = i2c_smbus_read_byte_data(mcu->client, reg);
|
||||
if (tmp < 0)
|
||||
return tmp;
|
||||
*val = tmp * 1000;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sg2042_mcu_write(struct device *dev,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long val)
|
||||
{
|
||||
struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
|
||||
int temp = val / 1000;
|
||||
int hyst_temp, crit_temp;
|
||||
u8 reg;
|
||||
|
||||
temp = clamp_val(temp, 0, MCU_POWER_MAX);
|
||||
|
||||
guard(mutex)(&mcu->mutex);
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_temp_crit:
|
||||
hyst_temp = i2c_smbus_read_byte_data(mcu->client,
|
||||
REG_REPOWER_TEMP);
|
||||
if (hyst_temp < 0)
|
||||
return hyst_temp;
|
||||
|
||||
crit_temp = temp;
|
||||
reg = REG_CRITICAL_TEMP;
|
||||
break;
|
||||
case hwmon_temp_crit_hyst:
|
||||
crit_temp = i2c_smbus_read_byte_data(mcu->client,
|
||||
REG_CRITICAL_TEMP);
|
||||
if (crit_temp < 0)
|
||||
return crit_temp;
|
||||
|
||||
hyst_temp = temp;
|
||||
reg = REG_REPOWER_TEMP;
|
||||
break;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
||||
/*
|
||||
* ensure hyst_temp is smaller to avoid MCU from
|
||||
* keeping triggering repower event.
|
||||
*/
|
||||
if (crit_temp < hyst_temp)
|
||||
return -EINVAL;
|
||||
|
||||
return i2c_smbus_write_byte_data(mcu->client, reg, temp);
|
||||
}
|
||||
|
||||
static umode_t sg2042_mcu_is_visible(const void *_data,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_temp:
|
||||
switch (attr) {
|
||||
case hwmon_temp_input:
|
||||
return 0444;
|
||||
case hwmon_temp_crit:
|
||||
case hwmon_temp_crit_hyst:
|
||||
if (channel == 0)
|
||||
return 0644;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct hwmon_ops sg2042_mcu_ops = {
|
||||
.is_visible = sg2042_mcu_is_visible,
|
||||
.read = sg2042_mcu_read,
|
||||
.write = sg2042_mcu_write,
|
||||
};
|
||||
|
||||
static const struct hwmon_chip_info sg2042_mcu_chip_info = {
|
||||
.ops = &sg2042_mcu_ops,
|
||||
.info = sg2042_mcu_info,
|
||||
};
|
||||
|
||||
static void sg2042_mcu_debugfs_init(struct sg2042_mcu_data *mcu,
|
||||
struct device *dev)
|
||||
{
|
||||
mcu->debugfs = debugfs_create_dir(dev_name(dev), sgmcu_debugfs);
|
||||
|
||||
debugfs_create_file("firmware_version", 0444, mcu->debugfs,
|
||||
mcu, &firmware_version_fops);
|
||||
debugfs_create_file("pcb_version", 0444, mcu->debugfs, mcu,
|
||||
&pcb_version_fops);
|
||||
debugfs_create_file("mcu_type", 0444, mcu->debugfs, mcu,
|
||||
&mcu_type_fops);
|
||||
debugfs_create_file("board_type", 0444, mcu->debugfs, mcu,
|
||||
&board_type_fops);
|
||||
}
|
||||
|
||||
static int sg2042_mcu_i2c_probe(struct i2c_client *client)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct sg2042_mcu_data *mcu;
|
||||
struct device *hwmon_dev;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
||||
I2C_FUNC_SMBUS_BLOCK_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
mcu = devm_kmalloc(dev, sizeof(*mcu), GFP_KERNEL);
|
||||
if (!mcu)
|
||||
return -ENOMEM;
|
||||
|
||||
mutex_init(&mcu->mutex);
|
||||
mcu->client = client;
|
||||
|
||||
i2c_set_clientdata(client, mcu);
|
||||
|
||||
hwmon_dev = devm_hwmon_device_register_with_info(dev, "sg2042_mcu",
|
||||
mcu,
|
||||
&sg2042_mcu_chip_info,
|
||||
NULL);
|
||||
if (IS_ERR(hwmon_dev))
|
||||
return PTR_ERR(hwmon_dev);
|
||||
|
||||
sg2042_mcu_debugfs_init(mcu, dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sg2042_mcu_i2c_remove(struct i2c_client *client)
|
||||
{
|
||||
struct sg2042_mcu_data *mcu = i2c_get_clientdata(client);
|
||||
|
||||
debugfs_remove_recursive(mcu->debugfs);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id sg2042_mcu_id[] = {
|
||||
{ "sg2042-hwmon-mcu", 0 },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, sg2042_mcu_id);
|
||||
|
||||
static const struct of_device_id sg2042_mcu_of_id[] = {
|
||||
{ .compatible = "sophgo,sg2042-hwmon-mcu" },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sg2042_mcu_of_id);
|
||||
|
||||
static struct i2c_driver sg2042_mcu_driver = {
|
||||
.driver = {
|
||||
.name = "sg2042-mcu",
|
||||
.of_match_table = sg2042_mcu_of_id,
|
||||
.dev_groups = sg2042_mcu_groups,
|
||||
},
|
||||
.probe = sg2042_mcu_i2c_probe,
|
||||
.remove = sg2042_mcu_i2c_remove,
|
||||
.id_table = sg2042_mcu_id,
|
||||
};
|
||||
|
||||
static int __init sg2042_mcu_init(void)
|
||||
{
|
||||
sgmcu_debugfs = debugfs_create_dir("sg2042-mcu", NULL);
|
||||
return i2c_add_driver(&sg2042_mcu_driver);
|
||||
}
|
||||
|
||||
static void __exit sg2042_mcu_exit(void)
|
||||
{
|
||||
debugfs_remove_recursive(sgmcu_debugfs);
|
||||
i2c_del_driver(&sg2042_mcu_driver);
|
||||
}
|
||||
|
||||
module_init(sg2042_mcu_init);
|
||||
module_exit(sg2042_mcu_exit);
|
||||
|
||||
MODULE_AUTHOR("Inochi Amaoto <inochiama@outlook.com>");
|
||||
MODULE_DESCRIPTION("MCU I2C driver for SG2042 soc platform");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user