linux/mm/swapfile.c

4037 lines
102 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/mm/swapfile.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
* Swap reorganised 29.12.95, Stephen Tweedie
*/
#include <linux/blkdev.h>
#include <linux/mm.h>
#include <linux/sched/mm.h>
#include <linux/sched/task.h>
#include <linux/hugetlb.h>
#include <linux/mman.h>
#include <linux/slab.h>
#include <linux/kernel_stat.h>
#include <linux/swap.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
#include <linux/namei.h>
#include <linux/shmem_fs.h>
#include <linux/blk-cgroup.h>
#include <linux/random.h>
#include <linux/writeback.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
#include <linux/ksm.h>
#include <linux/rmap.h>
#include <linux/security.h>
#include <linux/backing-dev.h>
#include <linux/mutex.h>
#include <linux/capability.h>
#include <linux/syscalls.h>
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
#include <linux/memcontrol.h>
#include <linux/poll.h>
#include <linux/oom.h>
mm: frontswap: core swap subsystem hooks and headers This patch, 2of4, contains the changes to the core swap subsystem. This includes: (1) makes available core swap data structures (swap_lock, swap_list and swap_info) that are needed by frontswap.c but we don't need to expose them to the dozens of files that include swap.h so we create a new swapfile.h just to extern-ify these and modify their declarations to non-static (2) adds frontswap-related elements to swap_info_struct. Frontswap_map points to vzalloc'ed one-bit-per-swap-page metadata that indicates whether the swap page is in frontswap or in the device and frontswap_pages counts how many pages are in frontswap. (3) adds hooks in the swap subsystem and extends try_to_unuse so that frontswap_shrink can do a "partial swapoff". Note that a failed frontswap_map allocation is safe... failure is noted by lack of "FS" in the subsequent printk. --- [v14: rebase to 3.4-rc2] [v10: no change] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: change counter to atomic_t to avoid races] [v8: kamezawa.hiroyu@jp.fujitsu.com: comment to clarify informational counters] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: add new swap struct elements only if config'd] [v6: rebase to 3.0-rc1] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v5: no change from v4] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v11: Rebased, fixed mm/swapfile.c context change] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-09 23:08:06 +00:00
#include <linux/swapfile.h>
#include <linux/export.h>
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:39 +00:00
#include <linux/swap_slots.h>
mm/swapfile.c: sort swap entries before free To reduce the lock contention of swap_info_struct->lock when freeing swap entry. The freed swap entries will be collected in a per-CPU buffer firstly, and be really freed later in batch. During the batch freeing, if the consecutive swap entries in the per-CPU buffer belongs to same swap device, the swap_info_struct->lock needs to be acquired/released only once, so that the lock contention could be reduced greatly. But if there are multiple swap devices, it is possible that the lock may be unnecessarily released/acquired because the swap entries belong to the same swap device are non-consecutive in the per-CPU buffer. To solve the issue, the per-CPU buffer is sorted according to the swap device before freeing the swap entries. With the patch, the memory (some swapped out) free time reduced 11.6% (from 2.65s to 2.35s) in the vm-scalability swap-w-rand test case with 16 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test swapping, the test case creates 16 processes, which allocate and write to the anonymous pages until the RAM and part of the swap device is used up, finally the memory (some swapped out) is freed before exit. [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/20170525005916.25249-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:40:31 +00:00
#include <linux/sort.h>
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
#include <linux/completion.h>
#include <linux/suspend.h>
#include <linux/zswap.h>
#include <linux/plist.h>
#include <asm/tlbflush.h>
#include <linux/swapops.h>
#include <linux/swap_cgroup.h>
#include "internal.h"
mm: create new mm/swap.h header file Patch series "MM changes to improve swap-over-NFS support". Assorted improvements for swap-via-filesystem. This is a resend of these patches, rebased on current HEAD. The only substantial changes is that swap_dirty_folio has replaced swap_set_page_dirty. Currently swap-via-fs (SWP_FS_OPS) doesn't work for any filesystem. It has previously worked for NFS but that broke a few releases back. This series changes to use a new ->swap_rw rather than ->readpage and ->direct_IO. It also makes other improvements. There is a companion series already in linux-next which fixes various issues with NFS. Once both series land, a final patch is needed which changes NFS over to use ->swap_rw. This patch (of 10): Many functions declared in include/linux/swap.h are only used within mm/ Create a new "mm/swap.h" and move some of these declarations there. Remove the redundant 'extern' from the function declarations. [akpm@linux-foundation.org: mm/memory-failure.c needs mm/swap.h] Link: https://lkml.kernel.org/r/164859751830.29473.5309689752169286816.stgit@noble.brown Link: https://lkml.kernel.org/r/164859778120.29473.11725907882296224053.stgit@noble.brown Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:47 +00:00
#include "swap.h"
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
static bool swap_count_continued(struct swap_info_struct *, pgoff_t,
unsigned char);
static void free_swap_count_continuations(struct swap_info_struct *);
static void swap_entry_range_free(struct swap_info_struct *si, swp_entry_t entry,
unsigned int nr_pages);
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
static void swap_range_alloc(struct swap_info_struct *si, unsigned long offset,
unsigned int nr_entries);
static bool folio_swapcache_freeable(struct folio *folio);
static struct swap_cluster_info *lock_cluster_or_swap_info(
struct swap_info_struct *si, unsigned long offset);
static void unlock_cluster_or_swap_info(struct swap_info_struct *si,
struct swap_cluster_info *ci);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
static DEFINE_SPINLOCK(swap_lock);
static unsigned int nr_swapfiles;
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
atomic_long_t nr_swap_pages;
/*
* Some modules use swappable objects and may try to swap them out under
* memory pressure (via the shrinker). Before doing so, they may wish to
* check to see if any swap space is available.
*/
EXPORT_SYMBOL_GPL(nr_swap_pages);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
/* protected with swap_lock. reading in vm_swap_full() doesn't need lock */
long total_swap_pages;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
static int least_priority = -1;
mm/swap: cache maximum swapfile size when init swap We used to have swapfile_maximum_size() fetching a maximum value of swapfile size per-arch. As the caller of max_swapfile_size() grows, this patch introduce a variable "swapfile_maximum_size" and cache the value of old max_swapfile_size(), so that we don't need to calculate the value every time. Caching the value in swapfile_init() is safe because when reaching the phase we should have initialized all the relevant information. Here the major arch to take care of is x86, which defines the max swapfile size based on L1TF mitigation. Here both X86_BUG_L1TF or l1tf_mitigation should have been setup properly when reaching swapfile_init(). As a reference, the code path looks like this for x86: - start_kernel - setup_arch - early_cpu_init - early_identify_cpu --> setup X86_BUG_L1TF - parse_early_param - l1tf_cmdline --> set l1tf_mitigation - check_bugs - l1tf_select_mitigation --> set l1tf_mitigation - arch_call_rest_init - rest_init - kernel_init - kernel_init_freeable - do_basic_setup - do_initcalls --> calls swapfile_init() (initcall level 4) The swapfile size only depends on swp pte format on non-x86 archs, so caching it is safe too. Since at it, rename max_swapfile_size() to arch_max_swapfile_size() because arch can define its own function, so it's more straightforward to have "arch_" as its prefix. At the meantime, export swapfile_maximum_size to replace the old usages of max_swapfile_size(). [peterx@redhat.com: declare arch_max_swapfile_size) in swapfile.h] Link: https://lkml.kernel.org/r/YxTh1GuC6ro5fKL5@xz-m1.local Link: https://lkml.kernel.org/r/20220811161331.37055-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:30 +00:00
unsigned long swapfile_maximum_size;
mm/swap: cache swap migration A/D bits support Introduce a variable swap_migration_ad_supported to cache whether the arch supports swap migration A/D bits. Here one thing to mention is that SWP_MIG_TOTAL_BITS will internally reference the other macro MAX_PHYSMEM_BITS, which is a function call on x86 (constant on all the rest of archs). It's safe to reference it in swapfile_init() because when reaching here we're already during initcalls level 4 so we must have initialized 5-level pgtable for x86_64 (right after early_identify_cpu() finishes). - start_kernel - setup_arch - early_cpu_init - get_cpu_cap --> fetch from CPUID (including X86_FEATURE_LA57) - early_identify_cpu --> clear X86_FEATURE_LA57 (if early lvl5 not enabled (USE_EARLY_PGTABLE_L5)) - arch_call_rest_init - rest_init - kernel_init - kernel_init_freeable - do_basic_setup - do_initcalls --> calls swapfile_init() (initcall level 4) This should slightly speed up the migration swap entry handlings. Link: https://lkml.kernel.org/r/20220811161331.37055-8-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:31 +00:00
#ifdef CONFIG_MIGRATION
bool swap_migration_ad_supported;
#endif /* CONFIG_MIGRATION */
static const char Bad_file[] = "Bad swap file entry ";
static const char Unused_file[] = "Unused swap file entry ";
static const char Bad_offset[] = "Bad swap offset entry ";
static const char Unused_offset[] = "Unused swap offset entry ";
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
/*
* all active swap_info_structs
* protected with swap_lock, and ordered by priority.
*/
static PLIST_HEAD(swap_active_head);
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
/*
* all available (active, not full) swap_info_structs
* protected with swap_avail_lock, ordered by priority.
* This is used by folio_alloc_swap() instead of swap_active_head
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
* because swap_active_head includes all swap_info_structs,
* but folio_alloc_swap() doesn't need to look at full ones.
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
* This uses its own lock instead of swap_lock because when a
* swap_info_struct changes between not-full/full, it needs to
* add/remove itself to/from this list, but the swap_info_struct->lock
* is held and the locking order requires swap_lock to be taken
* before any swap_info_struct->lock.
*/
static struct plist_head *swap_avail_heads;
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
static DEFINE_SPINLOCK(swap_avail_lock);
static struct swap_info_struct *swap_info[MAX_SWAPFILES];
static DEFINE_MUTEX(swapon_mutex);
static DECLARE_WAIT_QUEUE_HEAD(proc_poll_wait);
/* Activity counter to indicate that a swapon or swapoff has occurred */
static atomic_t proc_poll_event = ATOMIC_INIT(0);
atomic_t nr_rotate_swap = ATOMIC_INIT(0);
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
static struct swap_info_struct *swap_type_to_swap_info(int type)
{
mm, swap: remove unnecessary smp_rmb() in swap_type_to_swap_info() Before commit c10d38cc8d3e ("mm, swap: bounds check swap_info array accesses to avoid NULL derefs"), the typical code to reference the swap_info[] is as follows, type = swp_type(swp_entry); if (type >= nr_swapfiles) /* handle invalid swp_entry */; p = swap_info[type]; /* access fields of *p. OOPS! p may be NULL! */ Because the ordering isn't guaranteed, it's possible that swap_info[type] is read before "nr_swapfiles". And that may result in NULL pointer dereference. So after commit c10d38cc8d3e, the code becomes, struct swap_info_struct *swap_type_to_swap_info(int type) { if (type >= READ_ONCE(nr_swapfiles)) return NULL; smp_rmb(); return READ_ONCE(swap_info[type]); } /* users */ type = swp_type(swp_entry); p = swap_type_to_swap_info(type); if (!p) /* handle invalid swp_entry */; /* dereference p */ Where the value of swap_info[type] (that is, "p") is checked to be non-zero before being dereferenced. So, the NULL deferencing becomes impossible even if "nr_swapfiles" is read after swap_info[type]. Therefore, the "smp_rmb()" becomes unnecessary. And, we don't even need to read "nr_swapfiles" here. Because the non-zero checking for "p" is sufficient. We just need to make sure we will not access out of the boundary of the array. With the change, nr_swapfiles will only be accessed with swap_lock held, except in swapcache_free_entries(). Where the absolute correctness of the value isn't needed, as described in the comments. We still need to guarantee swap_info[type] is read before being dereferenced. That can be satisfied via the data dependency ordering enforced by READ_ONCE(swap_info[type]). This needs to be paired with proper write barriers. So smp_store_release() is used in alloc_swap_info() to guarantee the fields of *swap_info[type] is initialized before swap_info[type] itself being written. Note that the fields of *swap_info[type] is initialized to be 0 via kvzalloc() firstly. The assignment and deferencing of swap_info[type] is like rcu_assign_pointer() and rcu_dereference(). Link: https://lkml.kernel.org/r/20210520073301.1676294-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:37:09 +00:00
if (type >= MAX_SWAPFILES)
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
return NULL;
mm, swap: remove unnecessary smp_rmb() in swap_type_to_swap_info() Before commit c10d38cc8d3e ("mm, swap: bounds check swap_info array accesses to avoid NULL derefs"), the typical code to reference the swap_info[] is as follows, type = swp_type(swp_entry); if (type >= nr_swapfiles) /* handle invalid swp_entry */; p = swap_info[type]; /* access fields of *p. OOPS! p may be NULL! */ Because the ordering isn't guaranteed, it's possible that swap_info[type] is read before "nr_swapfiles". And that may result in NULL pointer dereference. So after commit c10d38cc8d3e, the code becomes, struct swap_info_struct *swap_type_to_swap_info(int type) { if (type >= READ_ONCE(nr_swapfiles)) return NULL; smp_rmb(); return READ_ONCE(swap_info[type]); } /* users */ type = swp_type(swp_entry); p = swap_type_to_swap_info(type); if (!p) /* handle invalid swp_entry */; /* dereference p */ Where the value of swap_info[type] (that is, "p") is checked to be non-zero before being dereferenced. So, the NULL deferencing becomes impossible even if "nr_swapfiles" is read after swap_info[type]. Therefore, the "smp_rmb()" becomes unnecessary. And, we don't even need to read "nr_swapfiles" here. Because the non-zero checking for "p" is sufficient. We just need to make sure we will not access out of the boundary of the array. With the change, nr_swapfiles will only be accessed with swap_lock held, except in swapcache_free_entries(). Where the absolute correctness of the value isn't needed, as described in the comments. We still need to guarantee swap_info[type] is read before being dereferenced. That can be satisfied via the data dependency ordering enforced by READ_ONCE(swap_info[type]). This needs to be paired with proper write barriers. So smp_store_release() is used in alloc_swap_info() to guarantee the fields of *swap_info[type] is initialized before swap_info[type] itself being written. Note that the fields of *swap_info[type] is initialized to be 0 via kvzalloc() firstly. The assignment and deferencing of swap_info[type] is like rcu_assign_pointer() and rcu_dereference(). Link: https://lkml.kernel.org/r/20210520073301.1676294-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:37:09 +00:00
return READ_ONCE(swap_info[type]); /* rcu_dereference() */
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
}
static inline unsigned char swap_count(unsigned char ent)
{
return ent & ~SWAP_HAS_CACHE; /* may include COUNT_CONTINUED flag */
}
mm/swapfile.c: use __try_to_reclaim_swap() in free_swap_and_cache() The code path to reclaim the swap entry in free_swap_and_cache() is almost same as that of __try_to_reclaim_swap(). The largest difference is just coding style. So the support to the additional requirement of free_swap_and_cache() is added into __try_to_reclaim_swap(). free_swap_and_cache() is changed to call __try_to_reclaim_swap(), and delete the duplicated code. This will improve code readability and reduce the potential bugs. There are 2 functionality differences between __try_to_reclaim_swap() and swap entry reclaim code of free_swap_and_cache(). - free_swap_and_cache() only reclaims the swap entry if the page is unmapped or swap is getting full. The support has been added into __try_to_reclaim_swap(). - try_to_free_swap() (called by __try_to_reclaim_swap()) checks pm_suspended_storage(), while free_swap_and_cache() not. I think this is OK. Because the page and the swap entry can be reclaimed later eventually. Link: http://lkml.kernel.org/r/20180827075535.17406-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:03:46 +00:00
/* Reclaim the swap entry anyway if possible */
#define TTRS_ANYWAY 0x1
/*
* Reclaim the swap entry if there are no more mappings of the
* corresponding page
*/
#define TTRS_UNMAPPED 0x2
/* Reclaim the swap entry if swap is getting full */
mm/swapfile.c: use __try_to_reclaim_swap() in free_swap_and_cache() The code path to reclaim the swap entry in free_swap_and_cache() is almost same as that of __try_to_reclaim_swap(). The largest difference is just coding style. So the support to the additional requirement of free_swap_and_cache() is added into __try_to_reclaim_swap(). free_swap_and_cache() is changed to call __try_to_reclaim_swap(), and delete the duplicated code. This will improve code readability and reduce the potential bugs. There are 2 functionality differences between __try_to_reclaim_swap() and swap entry reclaim code of free_swap_and_cache(). - free_swap_and_cache() only reclaims the swap entry if the page is unmapped or swap is getting full. The support has been added into __try_to_reclaim_swap(). - try_to_free_swap() (called by __try_to_reclaim_swap()) checks pm_suspended_storage(), while free_swap_and_cache() not. I think this is OK. Because the page and the swap entry can be reclaimed later eventually. Link: http://lkml.kernel.org/r/20180827075535.17406-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:03:46 +00:00
#define TTRS_FULL 0x4
/* Reclaim directly, bypass the slot cache and don't touch device lock */
#define TTRS_DIRECT 0x8
static bool swap_is_has_cache(struct swap_info_struct *si,
unsigned long offset, int nr_pages)
{
unsigned char *map = si->swap_map + offset;
unsigned char *map_end = map + nr_pages;
do {
VM_BUG_ON(!(*map & SWAP_HAS_CACHE));
if (*map != SWAP_HAS_CACHE)
return false;
} while (++map < map_end);
return true;
}
mm/swapfile.c: use __try_to_reclaim_swap() in free_swap_and_cache() The code path to reclaim the swap entry in free_swap_and_cache() is almost same as that of __try_to_reclaim_swap(). The largest difference is just coding style. So the support to the additional requirement of free_swap_and_cache() is added into __try_to_reclaim_swap(). free_swap_and_cache() is changed to call __try_to_reclaim_swap(), and delete the duplicated code. This will improve code readability and reduce the potential bugs. There are 2 functionality differences between __try_to_reclaim_swap() and swap entry reclaim code of free_swap_and_cache(). - free_swap_and_cache() only reclaims the swap entry if the page is unmapped or swap is getting full. The support has been added into __try_to_reclaim_swap(). - try_to_free_swap() (called by __try_to_reclaim_swap()) checks pm_suspended_storage(), while free_swap_and_cache() not. I think this is OK. Because the page and the swap entry can be reclaimed later eventually. Link: http://lkml.kernel.org/r/20180827075535.17406-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:03:46 +00:00
mm: attempt to batch free swap entries for zap_pte_range() Zhiguo reported that swap release could be a serious bottleneck during process exits[1]. With mTHP, we have the opportunity to batch free swaps. Thanks to the work of Chris and Kairui[2], I was able to achieve this optimization with minimal code changes by building on their efforts. If swap_count is 1, which is likely true as most anon memory are private, we can free all contiguous swap slots all together. Ran the below test program for measuring the bandwidth of munmap using zRAM and 64KiB mTHP: #include <sys/mman.h> #include <sys/time.h> #include <stdlib.h> unsigned long long tv_to_ms(struct timeval tv) { return tv.tv_sec * 1000 + tv.tv_usec / 1000; } main() { struct timeval tv_b, tv_e; int i; #define SIZE 1024*1024*1024 void *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (!p) { perror("fail to get memory"); exit(-1); } madvise(p, SIZE, MADV_HUGEPAGE); memset(p, 0x11, SIZE); /* write to get mem */ madvise(p, SIZE, MADV_PAGEOUT); gettimeofday(&tv_b, NULL); munmap(p, SIZE); gettimeofday(&tv_e, NULL); printf("munmap in bandwidth: %ld bytes/ms\n", SIZE/(tv_to_ms(tv_e) - tv_to_ms(tv_b))); } The result is as below (munmap bandwidth): mm-unstable mm-unstable-with-patch round1 21053761 63161283 round2 21053761 63161283 round3 21053761 63161283 round4 20648881 67108864 round5 20648881 67108864 munmap bandwidth becomes 3X faster. [1] https://lore.kernel.org/linux-mm/20240731133318.527-1-justinjiang@vivo.com/ [2] https://lore.kernel.org/linux-mm/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org/ [v-songbaohua@oppo.com: check all swaps belong to same swap_cgroup in swap_pte_batch()] Link: https://lkml.kernel.org/r/20240815215308.55233-1-21cnbao@gmail.com [hughd@google.com: add mem_cgroup_disabled() check] Link: https://lkml.kernel.org/r/33f34a88-0130-5444-9b84-93198eeb50e7@google.com [21cnbao@gmail.com: add missing zswap_invalidate()] Link: https://lkml.kernel.org/r/20240821054921.43468-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240807215859.57491-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Kairui Song <kasong@tencent.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Barry Song <baohua@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07 21:58:59 +00:00
static bool swap_is_last_map(struct swap_info_struct *si,
unsigned long offset, int nr_pages, bool *has_cache)
{
unsigned char *map = si->swap_map + offset;
unsigned char *map_end = map + nr_pages;
unsigned char count = *map;
if (swap_count(count) != 1)
return false;
while (++map < map_end) {
if (*map != count)
return false;
}
*has_cache = !!(count & SWAP_HAS_CACHE);
return true;
}
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
/*
* returns number of pages in the folio that backs the swap entry. If positive,
* the folio was reclaimed. If negative, the folio was not reclaimed. If 0, no
* folio was associated with the swap entry.
*/
mm/swapfile.c: use __try_to_reclaim_swap() in free_swap_and_cache() The code path to reclaim the swap entry in free_swap_and_cache() is almost same as that of __try_to_reclaim_swap(). The largest difference is just coding style. So the support to the additional requirement of free_swap_and_cache() is added into __try_to_reclaim_swap(). free_swap_and_cache() is changed to call __try_to_reclaim_swap(), and delete the duplicated code. This will improve code readability and reduce the potential bugs. There are 2 functionality differences between __try_to_reclaim_swap() and swap entry reclaim code of free_swap_and_cache(). - free_swap_and_cache() only reclaims the swap entry if the page is unmapped or swap is getting full. The support has been added into __try_to_reclaim_swap(). - try_to_free_swap() (called by __try_to_reclaim_swap()) checks pm_suspended_storage(), while free_swap_and_cache() not. I think this is OK. Because the page and the swap entry can be reclaimed later eventually. Link: http://lkml.kernel.org/r/20180827075535.17406-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:03:46 +00:00
static int __try_to_reclaim_swap(struct swap_info_struct *si,
unsigned long offset, unsigned long flags)
{
swp_entry_t entry = swp_entry(si->type, offset);
struct address_space *address_space = swap_address_space(entry);
struct swap_cluster_info *ci;
struct folio *folio;
int ret, nr_pages;
bool need_reclaim;
folio = filemap_get_folio(address_space, swap_cache_index(entry));
if (IS_ERR(folio))
return 0;
nr_pages = folio_nr_pages(folio);
ret = -nr_pages;
/*
mm/swapfile.c: use __try_to_reclaim_swap() in free_swap_and_cache() The code path to reclaim the swap entry in free_swap_and_cache() is almost same as that of __try_to_reclaim_swap(). The largest difference is just coding style. So the support to the additional requirement of free_swap_and_cache() is added into __try_to_reclaim_swap(). free_swap_and_cache() is changed to call __try_to_reclaim_swap(), and delete the duplicated code. This will improve code readability and reduce the potential bugs. There are 2 functionality differences between __try_to_reclaim_swap() and swap entry reclaim code of free_swap_and_cache(). - free_swap_and_cache() only reclaims the swap entry if the page is unmapped or swap is getting full. The support has been added into __try_to_reclaim_swap(). - try_to_free_swap() (called by __try_to_reclaim_swap()) checks pm_suspended_storage(), while free_swap_and_cache() not. I think this is OK. Because the page and the swap entry can be reclaimed later eventually. Link: http://lkml.kernel.org/r/20180827075535.17406-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:03:46 +00:00
* When this function is called from scan_swap_map_slots() and it's
* called by vmscan.c at reclaiming folios. So we hold a folio lock
mm/swapfile.c: use __try_to_reclaim_swap() in free_swap_and_cache() The code path to reclaim the swap entry in free_swap_and_cache() is almost same as that of __try_to_reclaim_swap(). The largest difference is just coding style. So the support to the additional requirement of free_swap_and_cache() is added into __try_to_reclaim_swap(). free_swap_and_cache() is changed to call __try_to_reclaim_swap(), and delete the duplicated code. This will improve code readability and reduce the potential bugs. There are 2 functionality differences between __try_to_reclaim_swap() and swap entry reclaim code of free_swap_and_cache(). - free_swap_and_cache() only reclaims the swap entry if the page is unmapped or swap is getting full. The support has been added into __try_to_reclaim_swap(). - try_to_free_swap() (called by __try_to_reclaim_swap()) checks pm_suspended_storage(), while free_swap_and_cache() not. I think this is OK. Because the page and the swap entry can be reclaimed later eventually. Link: http://lkml.kernel.org/r/20180827075535.17406-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:03:46 +00:00
* here. We have to use trylock for avoiding deadlock. This is a special
* case and you should use folio_free_swap() with explicit folio_lock()
* in usual operations.
*/
if (!folio_trylock(folio))
goto out;
mm: swap: prevent possible data-race in __try_to_reclaim_swap A report [1] was uploaded from syzbot. In the previous commit 862590ac3708 ("mm: swap: allow cache reclaim to skip slot cache"), the __try_to_reclaim_swap() function reads offset and folio->entry from folio without folio_lock protection. In the currently reported KCSAN log, it is assumed that the actual data-race will not occur because the calltrace that does WRITE already obtains the folio_lock and then writes. However, the existing __try_to_reclaim_swap() function was already implemented to perform reads under folio_lock protection [1], and there is a risk of a data-race occurring through a function other than the one shown in the KCSAN log. Therefore, I think it is appropriate to change read operations for folio to be performed under folio_lock. [1] ================================================================== BUG: KCSAN: data-race in __delete_from_swap_cache / __try_to_reclaim_swap write to 0xffffea0004c90328 of 8 bytes by task 5186 on cpu 0: __delete_from_swap_cache+0x1f0/0x290 mm/swap_state.c:163 delete_from_swap_cache+0x72/0xe0 mm/swap_state.c:243 folio_free_swap+0x1d8/0x1f0 mm/swapfile.c:1850 free_swap_cache mm/swap_state.c:293 [inline] free_pages_and_swap_cache+0x1fc/0x410 mm/swap_state.c:325 __tlb_batch_free_encoded_pages mm/mmu_gather.c:136 [inline] tlb_batch_pages_flush mm/mmu_gather.c:149 [inline] tlb_flush_mmu_free mm/mmu_gather.c:366 [inline] tlb_flush_mmu+0x2cf/0x440 mm/mmu_gather.c:373 zap_pte_range mm/memory.c:1700 [inline] zap_pmd_range mm/memory.c:1739 [inline] zap_pud_range mm/memory.c:1768 [inline] zap_p4d_range mm/memory.c:1789 [inline] unmap_page_range+0x1f3c/0x22d0 mm/memory.c:1810 unmap_single_vma+0x142/0x1d0 mm/memory.c:1856 unmap_vmas+0x18d/0x2b0 mm/memory.c:1900 exit_mmap+0x18a/0x690 mm/mmap.c:1864 __mmput+0x28/0x1b0 kernel/fork.c:1347 mmput+0x4c/0x60 kernel/fork.c:1369 exit_mm+0xe4/0x190 kernel/exit.c:571 do_exit+0x55e/0x17f0 kernel/exit.c:926 do_group_exit+0x102/0x150 kernel/exit.c:1088 get_signal+0xf2a/0x1070 kernel/signal.c:2917 arch_do_signal_or_restart+0x95/0x4b0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x59/0x130 kernel/entry/common.c:218 do_syscall_64+0xd6/0x1c0 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffffea0004c90328 of 8 bytes by task 5189 on cpu 1: __try_to_reclaim_swap+0x9d/0x510 mm/swapfile.c:198 free_swap_and_cache_nr+0x45d/0x8a0 mm/swapfile.c:1915 zap_pte_range mm/memory.c:1656 [inline] zap_pmd_range mm/memory.c:1739 [inline] zap_pud_range mm/memory.c:1768 [inline] zap_p4d_range mm/memory.c:1789 [inline] unmap_page_range+0xcf8/0x22d0 mm/memory.c:1810 unmap_single_vma+0x142/0x1d0 mm/memory.c:1856 unmap_vmas+0x18d/0x2b0 mm/memory.c:1900 exit_mmap+0x18a/0x690 mm/mmap.c:1864 __mmput+0x28/0x1b0 kernel/fork.c:1347 mmput+0x4c/0x60 kernel/fork.c:1369 exit_mm+0xe4/0x190 kernel/exit.c:571 do_exit+0x55e/0x17f0 kernel/exit.c:926 __do_sys_exit kernel/exit.c:1055 [inline] __se_sys_exit kernel/exit.c:1053 [inline] __x64_sys_exit+0x1f/0x20 kernel/exit.c:1053 x64_sys_call+0x2d46/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:61 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x0000000000000242 -> 0x0000000000000000 Link: https://lkml.kernel.org/r/20241007070623.23340-1-aha310510@gmail.com Reported-by: syzbot+fa43f1b63e3aa6f66329@syzkaller.appspotmail.com Fixes: 862590ac3708 ("mm: swap: allow cache reclaim to skip slot cache") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Kairui Song <kasong@tencent.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-10-07 07:06:23 +00:00
/* offset could point to the middle of a large folio */
entry = folio->swap;
offset = swp_offset(entry);
need_reclaim = ((flags & TTRS_ANYWAY) ||
((flags & TTRS_UNMAPPED) && !folio_mapped(folio)) ||
((flags & TTRS_FULL) && mem_cgroup_swap_full(folio)));
if (!need_reclaim || !folio_swapcache_freeable(folio))
goto out_unlock;
/*
* It's safe to delete the folio from swap cache only if the folio's
* swap_map is HAS_CACHE only, which means the slots have no page table
* reference or pending writeback, and can't be allocated to others.
*/
ci = lock_cluster_or_swap_info(si, offset);
need_reclaim = swap_is_has_cache(si, offset, nr_pages);
unlock_cluster_or_swap_info(si, ci);
if (!need_reclaim)
goto out_unlock;
if (!(flags & TTRS_DIRECT)) {
/* Free through slot cache */
delete_from_swap_cache(folio);
folio_set_dirty(folio);
ret = nr_pages;
goto out_unlock;
}
xa_lock_irq(&address_space->i_pages);
__delete_from_swap_cache(folio, entry, NULL);
xa_unlock_irq(&address_space->i_pages);
folio_ref_sub(folio, nr_pages);
folio_set_dirty(folio);
spin_lock(&si->lock);
/* Only sinple page folio can be backed by zswap */
if (nr_pages == 1)
zswap_invalidate(entry);
swap_entry_range_free(si, entry, nr_pages);
spin_unlock(&si->lock);
ret = nr_pages;
out_unlock:
folio_unlock(folio);
out:
folio_put(folio);
return ret;
}
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
static inline struct swap_extent *first_se(struct swap_info_struct *sis)
{
struct rb_node *rb = rb_first(&sis->swap_extent_root);
return rb_entry(rb, struct swap_extent, rb_node);
}
static inline struct swap_extent *next_se(struct swap_extent *se)
{
struct rb_node *rb = rb_next(&se->rb_node);
return rb ? rb_entry(rb, struct swap_extent, rb_node) : NULL;
}
/*
* swapon tell device that all the old swap contents can be discarded,
* to allow the swap device to optimize its wear-levelling.
*/
static int discard_swap(struct swap_info_struct *si)
{
struct swap_extent *se;
sector_t start_block;
sector_t nr_blocks;
int err = 0;
/* Do not discard the swap header page! */
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
se = first_se(si);
start_block = (se->start_block + 1) << (PAGE_SHIFT - 9);
nr_blocks = ((sector_t)se->nr_pages - 1) << (PAGE_SHIFT - 9);
if (nr_blocks) {
err = blkdev_issue_discard(si->bdev, start_block,
nr_blocks, GFP_KERNEL);
if (err)
return err;
cond_resched();
}
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
for (se = next_se(se); se; se = next_se(se)) {
start_block = se->start_block << (PAGE_SHIFT - 9);
nr_blocks = (sector_t)se->nr_pages << (PAGE_SHIFT - 9);
err = blkdev_issue_discard(si->bdev, start_block,
nr_blocks, GFP_KERNEL);
if (err)
break;
cond_resched();
}
return err; /* That will often be -EOPNOTSUPP */
}
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
static struct swap_extent *
offset_to_swap_extent(struct swap_info_struct *sis, unsigned long offset)
{
struct swap_extent *se;
struct rb_node *rb;
rb = sis->swap_extent_root.rb_node;
while (rb) {
se = rb_entry(rb, struct swap_extent, rb_node);
if (offset < se->start_page)
rb = rb->rb_left;
else if (offset >= se->start_page + se->nr_pages)
rb = rb->rb_right;
else
return se;
}
/* It *must* be present */
BUG();
}
sector_t swap_folio_sector(struct folio *folio)
{
struct swap_info_struct *sis = swp_swap_info(folio->swap);
struct swap_extent *se;
sector_t sector;
pgoff_t offset;
offset = swp_offset(folio->swap);
se = offset_to_swap_extent(sis, offset);
sector = se->start_block + (offset - se->start_page);
return sector << (PAGE_SHIFT - 9);
}
/*
* swap allocation tell device that a cluster of swap can now be discarded,
* to allow the swap device to optimize its wear-levelling.
*/
static void discard_swap_cluster(struct swap_info_struct *si,
pgoff_t start_page, pgoff_t nr_pages)
{
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
struct swap_extent *se = offset_to_swap_extent(si, start_page);
while (nr_pages) {
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
pgoff_t offset = start_page - se->start_page;
sector_t start_block = se->start_block + offset;
sector_t nr_blocks = se->nr_pages - offset;
if (nr_blocks > nr_pages)
nr_blocks = nr_pages;
start_page += nr_blocks;
nr_pages -= nr_blocks;
start_block <<= PAGE_SHIFT - 9;
nr_blocks <<= PAGE_SHIFT - 9;
if (blkdev_issue_discard(si->bdev, start_block,
nr_blocks, GFP_NOIO))
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
break;
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
se = next_se(se);
}
}
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
#ifdef CONFIG_THP_SWAP
#define SWAPFILE_CLUSTER HPAGE_PMD_NR
#define swap_entry_order(order) (order)
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
#else
#define SWAPFILE_CLUSTER 256
/*
* Define swap_entry_order() as constant to let compiler to optimize
* out some code if !CONFIG_THP_SWAP
*/
#define swap_entry_order(order) 0
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
#endif
#define LATENCY_LIMIT 256
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
static inline bool cluster_is_free(struct swap_cluster_info *info)
{
return info->flags & CLUSTER_FLAG_FREE;
}
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
static inline unsigned int cluster_index(struct swap_info_struct *si,
struct swap_cluster_info *ci)
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
{
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
return ci - si->cluster_info;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
static inline unsigned int cluster_offset(struct swap_info_struct *si,
struct swap_cluster_info *ci)
{
return cluster_index(si, ci) * SWAPFILE_CLUSTER;
}
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
static inline struct swap_cluster_info *lock_cluster(struct swap_info_struct *si,
unsigned long offset)
{
struct swap_cluster_info *ci;
ci = si->cluster_info;
if (ci) {
ci += offset / SWAPFILE_CLUSTER;
spin_lock(&ci->lock);
}
return ci;
}
static inline void unlock_cluster(struct swap_cluster_info *ci)
{
if (ci)
spin_unlock(&ci->lock);
}
mm: swap: add comments to lock_cluster_or_swap_info() Patch series "swap: THP optimizing refactoring", v4. Now the THP (Transparent Huge Page) swap optimizing is implemented in the way like below, #ifdef CONFIG_THP_SWAP huge_function(...) { } #else normal_function(...) { } #endif general_function(...) { if (huge) return thp_function(...); else return normal_function(...); } As pointed out by Dave Hansen, this will, 1. Create a new, wholly untested code path for huge page 2. Create two places to patch bugs 3. Are not reusing code when possible This patchset is to address these problems via merging huge/normal code path/functions if possible. One concern is that this may cause code size to dilate when !CONFIG_TRANSPARENT_HUGEPAGE. The data shows that most refactoring will only cause quite slight code size increase. This patch (of 8): To improve code readability. Link: http://lkml.kernel.org/r/20180720071845.17920-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:01 +00:00
/*
* Determine the locking method in use for this device. Return
* swap_cluster_info if SSD-style cluster-based locking is in place.
*/
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
static inline struct swap_cluster_info *lock_cluster_or_swap_info(
mm: swap: add comments to lock_cluster_or_swap_info() Patch series "swap: THP optimizing refactoring", v4. Now the THP (Transparent Huge Page) swap optimizing is implemented in the way like below, #ifdef CONFIG_THP_SWAP huge_function(...) { } #else normal_function(...) { } #endif general_function(...) { if (huge) return thp_function(...); else return normal_function(...); } As pointed out by Dave Hansen, this will, 1. Create a new, wholly untested code path for huge page 2. Create two places to patch bugs 3. Are not reusing code when possible This patchset is to address these problems via merging huge/normal code path/functions if possible. One concern is that this may cause code size to dilate when !CONFIG_TRANSPARENT_HUGEPAGE. The data shows that most refactoring will only cause quite slight code size increase. This patch (of 8): To improve code readability. Link: http://lkml.kernel.org/r/20180720071845.17920-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:01 +00:00
struct swap_info_struct *si, unsigned long offset)
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
{
struct swap_cluster_info *ci;
mm: swap: add comments to lock_cluster_or_swap_info() Patch series "swap: THP optimizing refactoring", v4. Now the THP (Transparent Huge Page) swap optimizing is implemented in the way like below, #ifdef CONFIG_THP_SWAP huge_function(...) { } #else normal_function(...) { } #endif general_function(...) { if (huge) return thp_function(...); else return normal_function(...); } As pointed out by Dave Hansen, this will, 1. Create a new, wholly untested code path for huge page 2. Create two places to patch bugs 3. Are not reusing code when possible This patchset is to address these problems via merging huge/normal code path/functions if possible. One concern is that this may cause code size to dilate when !CONFIG_TRANSPARENT_HUGEPAGE. The data shows that most refactoring will only cause quite slight code size increase. This patch (of 8): To improve code readability. Link: http://lkml.kernel.org/r/20180720071845.17920-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:01 +00:00
/* Try to use fine-grained SSD-style locking if available: */
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
ci = lock_cluster(si, offset);
mm: swap: add comments to lock_cluster_or_swap_info() Patch series "swap: THP optimizing refactoring", v4. Now the THP (Transparent Huge Page) swap optimizing is implemented in the way like below, #ifdef CONFIG_THP_SWAP huge_function(...) { } #else normal_function(...) { } #endif general_function(...) { if (huge) return thp_function(...); else return normal_function(...); } As pointed out by Dave Hansen, this will, 1. Create a new, wholly untested code path for huge page 2. Create two places to patch bugs 3. Are not reusing code when possible This patchset is to address these problems via merging huge/normal code path/functions if possible. One concern is that this may cause code size to dilate when !CONFIG_TRANSPARENT_HUGEPAGE. The data shows that most refactoring will only cause quite slight code size increase. This patch (of 8): To improve code readability. Link: http://lkml.kernel.org/r/20180720071845.17920-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:01 +00:00
/* Otherwise, fall back to traditional, coarse locking: */
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
if (!ci)
spin_lock(&si->lock);
return ci;
}
static inline void unlock_cluster_or_swap_info(struct swap_info_struct *si,
struct swap_cluster_info *ci)
{
if (ci)
unlock_cluster(ci);
else
spin_unlock(&si->lock);
}
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
/* Add a cluster to discard list and schedule it to do discard */
static void swap_cluster_schedule_discard(struct swap_info_struct *si,
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
struct swap_cluster_info *ci)
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
{
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
unsigned int idx = cluster_index(si, ci);
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
/*
* If scan_swap_map_slots() can't find a free cluster, it will check
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
* si->swap_map directly. To make sure the discarding cluster isn't
* taken by scan_swap_map_slots(), mark the swap entries bad (occupied).
* It will be cleared after discard
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
*/
memset(si->swap_map + idx * SWAPFILE_CLUSTER,
SWAP_MAP_BAD, SWAPFILE_CLUSTER);
VM_BUG_ON(ci->flags & CLUSTER_FLAG_FREE);
mm: swap: add a adaptive full cluster cache reclaim Link all full cluster with one full list, and reclaim from it when the allocation have ran out of all usable clusters. There are many reason a folio can end up being in the swap cache while having no swap count reference. So the best way to search for such slots is still by iterating the swap clusters. With the list as an LRU, iterating from the oldest cluster and keep them rotating is a very doable and clean way to free up potentially not inuse clusters. When any allocation failure, try reclaim and rotate only one cluster. This is adaptive for high order allocations they can tolerate fallback. So this avoids latency, and give the full cluster list an fair chance to get reclaimed. It release the usage stress for the fallback order 0 allocation or following up high order allocation. If the swap device is getting very full, reclaim more aggresively to ensure no OOM will happen. This ensures order 0 heavy workload won't go OOM as order 0 won't fail if any cluster still have any space. [ryncsn@gmail.com: fix discard of full cluster] Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:21 +00:00
list_move_tail(&ci->list, &si->discard_clusters);
ci->flags = 0;
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
schedule_work(&si->discard_work);
}
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
static void __free_cluster(struct swap_info_struct *si, struct swap_cluster_info *ci)
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
{
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
lockdep_assert_held(&si->lock);
lockdep_assert_held(&ci->lock);
mm: swap: add a adaptive full cluster cache reclaim Link all full cluster with one full list, and reclaim from it when the allocation have ran out of all usable clusters. There are many reason a folio can end up being in the swap cache while having no swap count reference. So the best way to search for such slots is still by iterating the swap clusters. With the list as an LRU, iterating from the oldest cluster and keep them rotating is a very doable and clean way to free up potentially not inuse clusters. When any allocation failure, try reclaim and rotate only one cluster. This is adaptive for high order allocations they can tolerate fallback. So this avoids latency, and give the full cluster list an fair chance to get reclaimed. It release the usage stress for the fallback order 0 allocation or following up high order allocation. If the swap device is getting very full, reclaim more aggresively to ensure no OOM will happen. This ensures order 0 heavy workload won't go OOM as order 0 won't fail if any cluster still have any space. [ryncsn@gmail.com: fix discard of full cluster] Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:21 +00:00
if (ci->flags)
list_move_tail(&ci->list, &si->free_clusters);
else
list_add_tail(&ci->list, &si->free_clusters);
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
ci->flags = CLUSTER_FLAG_FREE;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
ci->order = 0;
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
}
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
/*
* Doing discard actually. After a cluster discard is finished, the cluster
* will be added to free cluster list. caller should hold si->lock.
*/
static void swap_do_scheduled_discard(struct swap_info_struct *si)
{
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
struct swap_cluster_info *ci;
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
unsigned int idx;
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
while (!list_empty(&si->discard_clusters)) {
ci = list_first_entry(&si->discard_clusters, struct swap_cluster_info, list);
list_del(&ci->list);
idx = cluster_index(si, ci);
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
spin_unlock(&si->lock);
discard_swap_cluster(si, idx * SWAPFILE_CLUSTER,
SWAPFILE_CLUSTER);
spin_lock(&si->lock);
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
spin_lock(&ci->lock);
__free_cluster(si, ci);
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
memset(si->swap_map + idx * SWAPFILE_CLUSTER,
0, SWAPFILE_CLUSTER);
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
spin_unlock(&ci->lock);
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
}
}
static void swap_discard_work(struct work_struct *work)
{
struct swap_info_struct *si;
si = container_of(work, struct swap_info_struct, discard_work);
spin_lock(&si->lock);
swap_do_scheduled_discard(si);
spin_unlock(&si->lock);
}
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
static void swap_users_ref_free(struct percpu_ref *ref)
{
struct swap_info_struct *si;
si = container_of(ref, struct swap_info_struct, users);
complete(&si->comp);
}
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
static void free_cluster(struct swap_info_struct *si, struct swap_cluster_info *ci)
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
{
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
VM_BUG_ON(ci->count != 0);
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
lockdep_assert_held(&si->lock);
lockdep_assert_held(&ci->lock);
if (ci->flags & CLUSTER_FLAG_FRAG)
si->frag_cluster_nr[ci->order]--;
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
/*
* If the swap is discardable, prepare discard the cluster
* instead of free it immediately. The cluster will be freed
* after discard.
*/
if ((si->flags & (SWP_WRITEOK | SWP_PAGE_DISCARD)) ==
(SWP_WRITEOK | SWP_PAGE_DISCARD)) {
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
swap_cluster_schedule_discard(si, ci);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
return;
}
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
__free_cluster(si, ci);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
}
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
/*
* The cluster corresponding to page_nr will be used. The cluster will not be
* added to free cluster list and its usage counter will be increased by 1.
* Only used for initialization.
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
*/
static void inc_cluster_info_page(struct swap_info_struct *si,
struct swap_cluster_info *cluster_info, unsigned long page_nr)
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
{
unsigned long idx = page_nr / SWAPFILE_CLUSTER;
struct swap_cluster_info *ci;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
if (!cluster_info)
return;
ci = cluster_info + idx;
ci->count++;
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
VM_BUG_ON(ci->count > SWAPFILE_CLUSTER);
VM_BUG_ON(ci->flags);
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
}
/*
* The cluster ci decreases @nr_pages usage. If the usage counter becomes 0,
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
* which means no page in the cluster is in use, we can optionally discard
* the cluster and add it to free cluster list.
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
*/
static void dec_cluster_info_page(struct swap_info_struct *si,
struct swap_cluster_info *ci, int nr_pages)
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
{
if (!si->cluster_info)
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
return;
VM_BUG_ON(ci->count < nr_pages);
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
VM_BUG_ON(cluster_is_free(ci));
lockdep_assert_held(&si->lock);
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
lockdep_assert_held(&ci->lock);
ci->count -= nr_pages;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
if (!ci->count) {
free_cluster(si, ci);
return;
}
if (!(ci->flags & CLUSTER_FLAG_NONFULL)) {
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
VM_BUG_ON(ci->flags & CLUSTER_FLAG_FREE);
mm: swap: add a adaptive full cluster cache reclaim Link all full cluster with one full list, and reclaim from it when the allocation have ran out of all usable clusters. There are many reason a folio can end up being in the swap cache while having no swap count reference. So the best way to search for such slots is still by iterating the swap clusters. With the list as an LRU, iterating from the oldest cluster and keep them rotating is a very doable and clean way to free up potentially not inuse clusters. When any allocation failure, try reclaim and rotate only one cluster. This is adaptive for high order allocations they can tolerate fallback. So this avoids latency, and give the full cluster list an fair chance to get reclaimed. It release the usage stress for the fallback order 0 allocation or following up high order allocation. If the swap device is getting very full, reclaim more aggresively to ensure no OOM will happen. This ensures order 0 heavy workload won't go OOM as order 0 won't fail if any cluster still have any space. [ryncsn@gmail.com: fix discard of full cluster] Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:21 +00:00
if (ci->flags & CLUSTER_FLAG_FRAG)
si->frag_cluster_nr[ci->order]--;
list_move_tail(&ci->list, &si->nonfull_clusters[ci->order]);
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
ci->flags = CLUSTER_FLAG_NONFULL;
}
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
}
static bool cluster_reclaim_range(struct swap_info_struct *si,
struct swap_cluster_info *ci,
unsigned long start, unsigned long end)
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
{
unsigned char *map = si->swap_map;
unsigned long offset;
spin_unlock(&ci->lock);
spin_unlock(&si->lock);
for (offset = start; offset < end; offset++) {
switch (READ_ONCE(map[offset])) {
case 0:
continue;
case SWAP_HAS_CACHE:
if (__try_to_reclaim_swap(si, offset, TTRS_ANYWAY | TTRS_DIRECT) > 0)
continue;
goto out;
default:
goto out;
}
}
out:
spin_lock(&si->lock);
spin_lock(&ci->lock);
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
/*
* Recheck the range no matter reclaim succeeded or not, the slot
* could have been be freed while we are not holding the lock.
*/
for (offset = start; offset < end; offset++)
if (READ_ONCE(map[offset]))
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
return false;
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
return true;
}
static bool cluster_scan_range(struct swap_info_struct *si,
struct swap_cluster_info *ci,
unsigned long start, unsigned int nr_pages)
{
unsigned long offset, end = start + nr_pages;
unsigned char *map = si->swap_map;
bool need_reclaim = false;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
for (offset = start; offset < end; offset++) {
switch (READ_ONCE(map[offset])) {
case 0:
continue;
case SWAP_HAS_CACHE:
if (!vm_swap_full())
return false;
need_reclaim = true;
continue;
default:
return false;
}
}
if (need_reclaim)
return cluster_reclaim_range(si, ci, start, end);
return true;
}
static void cluster_alloc_range(struct swap_info_struct *si, struct swap_cluster_info *ci,
unsigned int start, unsigned char usage,
unsigned int order)
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
{
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
unsigned int nr_pages = 1 << order;
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (cluster_is_free(ci)) {
if (nr_pages < SWAPFILE_CLUSTER) {
list_move_tail(&ci->list, &si->nonfull_clusters[order]);
ci->flags = CLUSTER_FLAG_NONFULL;
}
ci->order = order;
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
memset(si->swap_map + start, usage, nr_pages);
swap_range_alloc(si, start, nr_pages);
ci->count += nr_pages;
if (ci->count == SWAPFILE_CLUSTER) {
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
VM_BUG_ON(!(ci->flags &
(CLUSTER_FLAG_FREE | CLUSTER_FLAG_NONFULL | CLUSTER_FLAG_FRAG)));
if (ci->flags & CLUSTER_FLAG_FRAG)
si->frag_cluster_nr[ci->order]--;
mm: swap: add a adaptive full cluster cache reclaim Link all full cluster with one full list, and reclaim from it when the allocation have ran out of all usable clusters. There are many reason a folio can end up being in the swap cache while having no swap count reference. So the best way to search for such slots is still by iterating the swap clusters. With the list as an LRU, iterating from the oldest cluster and keep them rotating is a very doable and clean way to free up potentially not inuse clusters. When any allocation failure, try reclaim and rotate only one cluster. This is adaptive for high order allocations they can tolerate fallback. So this avoids latency, and give the full cluster list an fair chance to get reclaimed. It release the usage stress for the fallback order 0 allocation or following up high order allocation. If the swap device is getting very full, reclaim more aggresively to ensure no OOM will happen. This ensures order 0 heavy workload won't go OOM as order 0 won't fail if any cluster still have any space. [ryncsn@gmail.com: fix discard of full cluster] Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:21 +00:00
list_move_tail(&ci->list, &si->full_clusters);
ci->flags = CLUSTER_FLAG_FULL;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
}
}
static unsigned int alloc_swap_scan_cluster(struct swap_info_struct *si, unsigned long offset,
unsigned int *foundp, unsigned int order,
unsigned char usage)
{
unsigned long start = offset & ~(SWAPFILE_CLUSTER - 1);
unsigned long end = min(start + SWAPFILE_CLUSTER, si->max);
unsigned int nr_pages = 1 << order;
struct swap_cluster_info *ci;
if (end < nr_pages)
return SWAP_NEXT_INVALID;
end -= nr_pages;
ci = lock_cluster(si, offset);
if (ci->count + nr_pages > SWAPFILE_CLUSTER) {
offset = SWAP_NEXT_INVALID;
goto done;
}
while (offset <= end) {
if (cluster_scan_range(si, ci, offset, nr_pages)) {
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
cluster_alloc_range(si, ci, offset, usage, order);
*foundp = offset;
if (ci->count == SWAPFILE_CLUSTER) {
offset = SWAP_NEXT_INVALID;
goto done;
}
offset += nr_pages;
break;
}
offset += nr_pages;
}
if (offset > end)
offset = SWAP_NEXT_INVALID;
done:
unlock_cluster(ci);
return offset;
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
}
mm: swap: add a adaptive full cluster cache reclaim Link all full cluster with one full list, and reclaim from it when the allocation have ran out of all usable clusters. There are many reason a folio can end up being in the swap cache while having no swap count reference. So the best way to search for such slots is still by iterating the swap clusters. With the list as an LRU, iterating from the oldest cluster and keep them rotating is a very doable and clean way to free up potentially not inuse clusters. When any allocation failure, try reclaim and rotate only one cluster. This is adaptive for high order allocations they can tolerate fallback. So this avoids latency, and give the full cluster list an fair chance to get reclaimed. It release the usage stress for the fallback order 0 allocation or following up high order allocation. If the swap device is getting very full, reclaim more aggresively to ensure no OOM will happen. This ensures order 0 heavy workload won't go OOM as order 0 won't fail if any cluster still have any space. [ryncsn@gmail.com: fix discard of full cluster] Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:21 +00:00
static void swap_reclaim_full_clusters(struct swap_info_struct *si)
{
long to_scan = 1;
unsigned long offset, end;
struct swap_cluster_info *ci;
unsigned char *map = si->swap_map;
int nr_reclaim, total_reclaimed = 0;
if (atomic_long_read(&nr_swap_pages) <= SWAPFILE_CLUSTER)
to_scan = si->inuse_pages / SWAPFILE_CLUSTER;
while (!list_empty(&si->full_clusters)) {
ci = list_first_entry(&si->full_clusters, struct swap_cluster_info, list);
list_move_tail(&ci->list, &si->full_clusters);
offset = cluster_offset(si, ci);
end = min(si->max, offset + SWAPFILE_CLUSTER);
to_scan--;
while (offset < end) {
if (READ_ONCE(map[offset]) == SWAP_HAS_CACHE) {
spin_unlock(&si->lock);
nr_reclaim = __try_to_reclaim_swap(si, offset,
TTRS_ANYWAY | TTRS_DIRECT);
spin_lock(&si->lock);
if (nr_reclaim > 0) {
offset += nr_reclaim;
total_reclaimed += nr_reclaim;
continue;
} else if (nr_reclaim < 0) {
offset += -nr_reclaim;
continue;
}
}
offset++;
}
if (to_scan <= 0 || total_reclaimed)
break;
}
}
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
/*
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
* Try to get swap entries with specified order from current cpu's swap entry
* pool (a cluster). This might involve allocating a new cluster for current CPU
* too.
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
*/
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
static unsigned long cluster_alloc_swap_entry(struct swap_info_struct *si, int order,
unsigned char usage)
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
{
struct percpu_cluster *cluster;
struct swap_cluster_info *ci;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
unsigned int offset, found = 0;
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
new_cluster:
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
lockdep_assert_held(&si->lock);
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
cluster = this_cpu_ptr(si->percpu_cluster);
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
offset = cluster->next[order];
if (offset) {
offset = alloc_swap_scan_cluster(si, offset, &found, order, usage);
if (found)
goto done;
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (!list_empty(&si->free_clusters)) {
ci = list_first_entry(&si->free_clusters, struct swap_cluster_info, list);
offset = alloc_swap_scan_cluster(si, cluster_offset(si, ci), &found, order, usage);
VM_BUG_ON(!found);
goto done;
}
if (order < PMD_ORDER) {
unsigned int frags = 0;
while (!list_empty(&si->nonfull_clusters[order])) {
ci = list_first_entry(&si->nonfull_clusters[order],
struct swap_cluster_info, list);
list_move_tail(&ci->list, &si->frag_clusters[order]);
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
ci->flags = CLUSTER_FLAG_FRAG;
si->frag_cluster_nr[order]++;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
offset = alloc_swap_scan_cluster(si, cluster_offset(si, ci),
&found, order, usage);
frags++;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (found)
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
break;
}
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
if (!found) {
/*
* Nonfull clusters are moved to frag tail if we reached
* here, count them too, don't over scan the frag list.
*/
while (frags < si->frag_cluster_nr[order]) {
ci = list_first_entry(&si->frag_clusters[order],
struct swap_cluster_info, list);
/*
* Rotate the frag list to iterate, they were all failing
* high order allocation or moved here due to per-CPU usage,
* this help keeping usable cluster ahead.
*/
list_move_tail(&ci->list, &si->frag_clusters[order]);
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
offset = alloc_swap_scan_cluster(si, cluster_offset(si, ci),
&found, order, usage);
frags++;
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
if (found)
break;
}
}
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
if (found)
goto done;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (!list_empty(&si->discard_clusters)) {
/*
* we don't have free cluster but have some clusters in
* discarding, do discard now and reclaim them, then
* reread cluster_next_cpu since we dropped si->lock
*/
swap_do_scheduled_discard(si);
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
goto new_cluster;
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (order)
goto done;
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
/* Order 0 stealing from higher order */
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
for (int o = 1; o < SWAP_NR_ORDERS; o++) {
/*
* Clusters here have at least one usable slots and can't fail order 0
* allocation, but reclaim may drop si->lock and race with another user.
*/
while (!list_empty(&si->frag_clusters[o])) {
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
ci = list_first_entry(&si->frag_clusters[o],
struct swap_cluster_info, list);
offset = alloc_swap_scan_cluster(si, cluster_offset(si, ci),
&found, 0, usage);
if (found)
goto done;
mm: swap: add a fragment cluster list Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:19 +00:00
}
while (!list_empty(&si->nonfull_clusters[o])) {
ci = list_first_entry(&si->nonfull_clusters[o],
struct swap_cluster_info, list);
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
offset = alloc_swap_scan_cluster(si, cluster_offset(si, ci),
&found, 0, usage);
if (found)
goto done;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
}
}
mm: swap: add a adaptive full cluster cache reclaim Link all full cluster with one full list, and reclaim from it when the allocation have ran out of all usable clusters. There are many reason a folio can end up being in the swap cache while having no swap count reference. So the best way to search for such slots is still by iterating the swap clusters. With the list as an LRU, iterating from the oldest cluster and keep them rotating is a very doable and clean way to free up potentially not inuse clusters. When any allocation failure, try reclaim and rotate only one cluster. This is adaptive for high order allocations they can tolerate fallback. So this avoids latency, and give the full cluster list an fair chance to get reclaimed. It release the usage stress for the fallback order 0 allocation or following up high order allocation. If the swap device is getting very full, reclaim more aggresively to ensure no OOM will happen. This ensures order 0 heavy workload won't go OOM as order 0 won't fail if any cluster still have any space. [ryncsn@gmail.com: fix discard of full cluster] Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:21 +00:00
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
done:
mm: swap: add a adaptive full cluster cache reclaim Link all full cluster with one full list, and reclaim from it when the allocation have ran out of all usable clusters. There are many reason a folio can end up being in the swap cache while having no swap count reference. So the best way to search for such slots is still by iterating the swap clusters. With the list as an LRU, iterating from the oldest cluster and keep them rotating is a very doable and clean way to free up potentially not inuse clusters. When any allocation failure, try reclaim and rotate only one cluster. This is adaptive for high order allocations they can tolerate fallback. So this avoids latency, and give the full cluster list an fair chance to get reclaimed. It release the usage stress for the fallback order 0 allocation or following up high order allocation. If the swap device is getting very full, reclaim more aggresively to ensure no OOM will happen. This ensures order 0 heavy workload won't go OOM as order 0 won't fail if any cluster still have any space. [ryncsn@gmail.com: fix discard of full cluster] Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:21 +00:00
/* Try reclaim from full clusters if device is nearfull */
if (vm_swap_full() && (!found || (si->pages - si->inuse_pages) < SWAPFILE_CLUSTER)) {
swap_reclaim_full_clusters(si);
if (!found && !order && si->pages != si->inuse_pages)
goto new_cluster;
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
cluster->next[order] = offset;
return found;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
}
static void __del_from_avail_list(struct swap_info_struct *si)
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
{
int nid;
assert_spin_locked(&si->lock);
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
for_each_node(nid)
plist_del(&si->avail_lists[nid], &swap_avail_heads[nid]);
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
}
static void del_from_avail_list(struct swap_info_struct *si)
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
{
spin_lock(&swap_avail_lock);
__del_from_avail_list(si);
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
spin_unlock(&swap_avail_lock);
}
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
static void swap_range_alloc(struct swap_info_struct *si, unsigned long offset,
unsigned int nr_entries)
{
unsigned int end = offset + nr_entries - 1;
if (offset == si->lowest_bit)
si->lowest_bit += nr_entries;
if (end == si->highest_bit)
mm/swapfile: fix and annotate various data races swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. [cai@lca.pw: add a missing annotation for si->flags in memory.c] Link: http://lkml.kernel.org/r/1581612647-5958-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/1581095163-12198-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 00:31:31 +00:00
WRITE_ONCE(si->highest_bit, si->highest_bit - nr_entries);
WRITE_ONCE(si->inuse_pages, si->inuse_pages + nr_entries);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
if (si->inuse_pages == si->pages) {
si->lowest_bit = si->max;
si->highest_bit = 0;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
del_from_avail_list(si);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
}
}
static void add_to_avail_list(struct swap_info_struct *si)
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
{
int nid;
spin_lock(&swap_avail_lock);
for_each_node(nid)
plist_add(&si->avail_lists[nid], &swap_avail_heads[nid]);
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
spin_unlock(&swap_avail_lock);
}
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
static void swap_range_free(struct swap_info_struct *si, unsigned long offset,
unsigned int nr_entries)
{
unsigned long begin = offset;
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
unsigned long end = offset + nr_entries - 1;
void (*swap_slot_free_notify)(struct block_device *, unsigned long);
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
unsigned int i;
/*
* Use atomic clear_bit operations only on zeromap instead of non-atomic
* bitmap_clear to prevent adjacent bits corruption due to simultaneous writes.
*/
for (i = 0; i < nr_entries; i++)
clear_bit(offset + i, si->zeromap);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
if (offset < si->lowest_bit)
si->lowest_bit = offset;
if (end > si->highest_bit) {
bool was_full = !si->highest_bit;
mm/swapfile: fix and annotate various data races swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. [cai@lca.pw: add a missing annotation for si->flags in memory.c] Link: http://lkml.kernel.org/r/1581612647-5958-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/1581095163-12198-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 00:31:31 +00:00
WRITE_ONCE(si->highest_bit, end);
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
if (was_full && (si->flags & SWP_WRITEOK))
add_to_avail_list(si);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
}
if (si->flags & SWP_BLKDEV)
swap_slot_free_notify =
si->bdev->bd_disk->fops->swap_slot_free_notify;
else
swap_slot_free_notify = NULL;
while (offset <= end) {
arch_swap_invalidate_page(si->type, offset);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
if (swap_slot_free_notify)
swap_slot_free_notify(si->bdev, offset);
offset++;
}
clear_shadow_from_swap_cache(si->type, begin, end);
mm: swap: enforce updating inuse_pages at the end of swap_range_free() Patch series "mm: zswap: simplify zswap_swapoff()", v2. These patches aim to simplify zswap_swapoff() by removing the unnecessary trees cleanup code. Patch 1 makes sure that the order of operations during swapoff is enforced correctly, making sure the simplification in patch 2 is correct in a future-proof manner. This patch (of 2): In swap_range_free(), we update inuse_pages then do some cleanups (arch invalidation, zswap invalidation, swap cache cleanups, etc). During swapoff, try_to_unuse() checks that inuse_pages is 0 to make sure all swap entries are freed. Make sure we only update inuse_pages after we are done with the cleanups in swap_range_free(), and use the proper memory barriers to enforce it. This makes sure that code following try_to_unuse() can safely assume that swap_range_free() ran for all entries in thr swapfile (e.g. swap cache cleanup, zswap_swapoff()). In practice, this currently isn't a problem because swap_range_free() is called with the swap info lock held, and the swapoff code happens to spin for that after try_to_unuse(). However, this seems fragile and unintentional, so make it more relable and future-proof. This also facilitates a following simplification of zswap_swapoff(). Link: https://lkml.kernel.org/r/20240124045113.415378-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20240124045113.415378-2-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: Chris Li <chrisl@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-24 04:51:11 +00:00
/*
* Make sure that try_to_unuse() observes si->inuse_pages reaching 0
* only after the above cleanups are done.
*/
smp_wmb();
atomic_long_add(nr_entries, &nr_swap_pages);
WRITE_ONCE(si->inuse_pages, si->inuse_pages - nr_entries);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
}
swap: reduce lock contention on swap cache from swap slots allocation In some swap scalability test, it is found that there are heavy lock contention on swap cache even if we have split one swap cache radix tree per swap device to one swap cache radix tree every 64 MB trunk in commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"). The reason is as follow. After the swap device becomes fragmented so that there's no free swap cluster, the swap device will be scanned linearly to find the free swap slots. swap_info_struct->cluster_next is the next scanning base that is shared by all CPUs. So nearby free swap slots will be allocated for different CPUs. The probability for multiple CPUs to operate on the same 64 MB trunk is high. This causes the lock contention on the swap cache. To solve the issue, in this patch, for SSD swap device, a percpu version next scanning base (cluster_next_cpu) is added. Every CPU will use its own per-cpu next scanning base. And after finishing scanning a 64MB trunk, the per-cpu scanning base will be changed to the beginning of another randomly selected 64MB trunk. In this way, the probability for multiple CPUs to operate on the same 64 MB trunk is reduced greatly. Thus the lock contention is reduced too. For HDD, because sequential access is more important for IO performance, the original shared next scanning base is used. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. One ram disk is configured as the swap device per socket. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random. In the original implementation, the lock contention on the swap cache is heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock_irq.add_to_swap_cache.add_to_swap.shrink_page_list: 7.91 _raw_spin_lock_irqsave.__remove_mapping.shrink_page_list: 7.11 _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 2.51 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 1.66 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.29 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.03 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 0.93 After applying this patch, it becomes, _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 3.58 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 2.3 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 2.26 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.8 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.19 The lock contention on the swap cache is almost eliminated. And the pmbench score increases 18.5%. The swapin throughput increases 18.7% from 2.96 GB/s to 3.51 GB/s. While the swapout throughput increases 18.5% from 2.99 GB/s to 3.54 GB/s. We need really fast disk to show the benefit. I have tried this on 2 Intel P3600 NVMe disks. The performance improvement is only about 1%. The improvement should be better on the faster disks, such as Intel Optane disk. [ying.huang@intel.com: fix cluster_next_cpu allocation and freeing, per Daniel] Link: http://lkml.kernel.org/r/20200525002648.336325-1-ying.huang@intel.com [ying.huang@intel.com: v4] Link: http://lkml.kernel.org/r/20200529010840.928819-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200520031502.175659-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:49:22 +00:00
static void set_cluster_next(struct swap_info_struct *si, unsigned long next)
{
unsigned long prev;
if (!(si->flags & SWP_SOLIDSTATE)) {
si->cluster_next = next;
return;
}
prev = this_cpu_read(*si->cluster_next_cpu);
/*
* Cross the swap address space size aligned trunk, choose
* another trunk randomly to avoid lock contention on swap
* address space if possible.
*/
if ((prev >> SWAP_ADDRESS_SPACE_SHIFT) !=
(next >> SWAP_ADDRESS_SPACE_SHIFT)) {
/* No free swap slots available */
if (si->highest_bit <= si->lowest_bit)
return;
next = get_random_u32_inclusive(si->lowest_bit, si->highest_bit);
swap: reduce lock contention on swap cache from swap slots allocation In some swap scalability test, it is found that there are heavy lock contention on swap cache even if we have split one swap cache radix tree per swap device to one swap cache radix tree every 64 MB trunk in commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"). The reason is as follow. After the swap device becomes fragmented so that there's no free swap cluster, the swap device will be scanned linearly to find the free swap slots. swap_info_struct->cluster_next is the next scanning base that is shared by all CPUs. So nearby free swap slots will be allocated for different CPUs. The probability for multiple CPUs to operate on the same 64 MB trunk is high. This causes the lock contention on the swap cache. To solve the issue, in this patch, for SSD swap device, a percpu version next scanning base (cluster_next_cpu) is added. Every CPU will use its own per-cpu next scanning base. And after finishing scanning a 64MB trunk, the per-cpu scanning base will be changed to the beginning of another randomly selected 64MB trunk. In this way, the probability for multiple CPUs to operate on the same 64 MB trunk is reduced greatly. Thus the lock contention is reduced too. For HDD, because sequential access is more important for IO performance, the original shared next scanning base is used. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. One ram disk is configured as the swap device per socket. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random. In the original implementation, the lock contention on the swap cache is heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock_irq.add_to_swap_cache.add_to_swap.shrink_page_list: 7.91 _raw_spin_lock_irqsave.__remove_mapping.shrink_page_list: 7.11 _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 2.51 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 1.66 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.29 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.03 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 0.93 After applying this patch, it becomes, _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 3.58 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 2.3 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 2.26 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.8 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.19 The lock contention on the swap cache is almost eliminated. And the pmbench score increases 18.5%. The swapin throughput increases 18.7% from 2.96 GB/s to 3.51 GB/s. While the swapout throughput increases 18.5% from 2.99 GB/s to 3.54 GB/s. We need really fast disk to show the benefit. I have tried this on 2 Intel P3600 NVMe disks. The performance improvement is only about 1%. The improvement should be better on the faster disks, such as Intel Optane disk. [ying.huang@intel.com: fix cluster_next_cpu allocation and freeing, per Daniel] Link: http://lkml.kernel.org/r/20200525002648.336325-1-ying.huang@intel.com [ying.huang@intel.com: v4] Link: http://lkml.kernel.org/r/20200529010840.928819-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200520031502.175659-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:49:22 +00:00
next = ALIGN_DOWN(next, SWAP_ADDRESS_SPACE_PAGES);
next = max_t(unsigned int, next, si->lowest_bit);
}
this_cpu_write(*si->cluster_next_cpu, next);
}
static bool swap_offset_available_and_locked(struct swap_info_struct *si,
unsigned long offset)
{
if (data_race(!si->swap_map[offset])) {
spin_lock(&si->lock);
return true;
}
if (vm_swap_full() && READ_ONCE(si->swap_map[offset]) == SWAP_HAS_CACHE) {
spin_lock(&si->lock);
return true;
}
return false;
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
static int cluster_alloc_swap(struct swap_info_struct *si,
unsigned char usage, int nr,
swp_entry_t slots[], int order)
{
int n_ret = 0;
VM_BUG_ON(!si->cluster_info);
while (n_ret < nr) {
unsigned long offset = cluster_alloc_swap_entry(si, order, usage);
if (!offset)
break;
slots[n_ret++] = swp_entry(si->type, offset);
}
return n_ret;
}
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
static int scan_swap_map_slots(struct swap_info_struct *si,
unsigned char usage, int nr,
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
swp_entry_t slots[], int order)
{
unsigned long offset;
unsigned long scan_base;
unsigned long last_in_cluster = 0;
int latency_ration = LATENCY_LIMIT;
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
unsigned int nr_pages = 1 << order;
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
int n_ret = 0;
swap: try to scan more free slots even when fragmented Now, the scalability of swap code will drop much when the swap device becomes fragmented, because the swap slots allocation batching stops working. To solve the problem, in this patch, we will try to scan a little more swap slots with restricted effort to batch the swap slots allocation even if the swap device is fragmented. Test shows that the benchmark score can increase up to 37.1% with the patch. Details are as follows. The swap code has a per-cpu cache of swap slots. These batch swap space allocations to improve swap subsystem scaling. In the following code path, add_to_swap() get_swap_page() refill_swap_slots_cache() get_swap_pages() scan_swap_map_slots() scan_swap_map_slots() and get_swap_pages() can return multiple swap slots for each call. These slots will be cached in the per-CPU swap slots cache, so that several following swap slot requests will be fulfilled there to avoid the lock contention in the lower level swap space allocation/freeing code path. But this only works when there are free swap clusters. If a swap device becomes so fragmented that there's no free swap clusters, scan_swap_map_slots() and get_swap_pages() will return only one swap slot for each call in the above code path. Effectively, this falls back to the situation before the swap slots cache was introduced, the heavy lock contention on the swap related locks kills the scalability. Why does it work in this way? Because the swap device could be large, and the free swap slot scanning could be quite time consuming, to avoid taking too much time to scanning free swap slots, the conservative method was used. In fact, this can be improved via scanning a little more free slots with strictly restricted effort. Which is implemented in this patch. In scan_swap_map_slots(), after the first free swap slot is gotten, we will try to scan a little more, but only if we haven't scanned too many slots (< LATENCY_LIMIT). That is, the added scanning latency is strictly restricted. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. Multiple ram disks are configured as the swap devices. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random, so the swap space becomes highly fragmented during the test. In the original implementation, the lock contention on swap related locks is very heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock.get_swap_pages.get_swap_page.add_to_swap: 21.03 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.92 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.72 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 0.69 While after applying this patch, it becomes, _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 4.89 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 3.85 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.1 _raw_spin_lock_irqsave.pagevec_lru_move_fn.__lru_cache_add.do_swap_page: 0.88 That is, the lock contention on the swap locks is eliminated. And the pmbench score increases 37.1%. The swapin throughput increases 45.7% from 2.02 GB/s to 2.94 GB/s. While the swapout throughput increases 45.3% from 2.04 GB/s to 2.97 GB/s. Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200427030023.264780-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:49:10 +00:00
bool scanned_many = false;
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
/*
* We try to cluster swap pages by allocating them sequentially
* in swap. Once we've allocated SWAPFILE_CLUSTER pages this
* way, however, we resort to first-free allocation, starting
* a new cluster. This prevents us from scattering swap pages
* all over the entire swap partition, so that we reduce
* overall disk seek times between swap pages. -- sct
* But we do now try to find an empty cluster. -Andrea
* And we let swap pages go all over an SSD partition. Hugh
*/
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
if (order > 0) {
/*
* Should not even be attempting large allocations when huge
* page swap is disabled. Warn and fail the allocation.
*/
if (!IS_ENABLED(CONFIG_THP_SWAP) ||
nr_pages > SWAPFILE_CLUSTER) {
VM_WARN_ON_ONCE(1);
return 0;
}
/*
* Swapfile is not block device or not using clusters so unable
* to allocate large entries.
*/
if (!(si->flags & SWP_BLKDEV) || !si->cluster_info)
return 0;
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (si->cluster_info)
return cluster_alloc_swap(si, usage, nr, slots, order);
si->flags += SWP_SCANNING;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
/* For HDD, sequential access is more important. */
scan_base = si->cluster_next;
swap: reduce lock contention on swap cache from swap slots allocation In some swap scalability test, it is found that there are heavy lock contention on swap cache even if we have split one swap cache radix tree per swap device to one swap cache radix tree every 64 MB trunk in commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"). The reason is as follow. After the swap device becomes fragmented so that there's no free swap cluster, the swap device will be scanned linearly to find the free swap slots. swap_info_struct->cluster_next is the next scanning base that is shared by all CPUs. So nearby free swap slots will be allocated for different CPUs. The probability for multiple CPUs to operate on the same 64 MB trunk is high. This causes the lock contention on the swap cache. To solve the issue, in this patch, for SSD swap device, a percpu version next scanning base (cluster_next_cpu) is added. Every CPU will use its own per-cpu next scanning base. And after finishing scanning a 64MB trunk, the per-cpu scanning base will be changed to the beginning of another randomly selected 64MB trunk. In this way, the probability for multiple CPUs to operate on the same 64 MB trunk is reduced greatly. Thus the lock contention is reduced too. For HDD, because sequential access is more important for IO performance, the original shared next scanning base is used. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. One ram disk is configured as the swap device per socket. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random. In the original implementation, the lock contention on the swap cache is heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock_irq.add_to_swap_cache.add_to_swap.shrink_page_list: 7.91 _raw_spin_lock_irqsave.__remove_mapping.shrink_page_list: 7.11 _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 2.51 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 1.66 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.29 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.03 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 0.93 After applying this patch, it becomes, _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 3.58 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 2.3 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 2.26 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.8 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.19 The lock contention on the swap cache is almost eliminated. And the pmbench score increases 18.5%. The swapin throughput increases 18.7% from 2.96 GB/s to 3.51 GB/s. While the swapout throughput increases 18.5% from 2.99 GB/s to 3.54 GB/s. We need really fast disk to show the benefit. I have tried this on 2 Intel P3600 NVMe disks. The performance improvement is only about 1%. The improvement should be better on the faster disks, such as Intel Optane disk. [ying.huang@intel.com: fix cluster_next_cpu allocation and freeing, per Daniel] Link: http://lkml.kernel.org/r/20200525002648.336325-1-ying.huang@intel.com [ying.huang@intel.com: v4] Link: http://lkml.kernel.org/r/20200529010840.928819-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200520031502.175659-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:49:22 +00:00
offset = scan_base;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (unlikely(!si->cluster_nr--)) {
if (si->pages - si->inuse_pages < SWAPFILE_CLUSTER) {
si->cluster_nr = SWAPFILE_CLUSTER - 1;
goto checks;
}
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&si->lock);
/*
* If seek is expensive, start searching for new cluster from
* start of partition, to minimize the span of allocated swap.
*/
scan_base = offset = si->lowest_bit;
last_in_cluster = offset + SWAPFILE_CLUSTER - 1;
/* Locate the first empty (unaligned) cluster */
for (; last_in_cluster <= READ_ONCE(si->highest_bit); offset++) {
if (si->swap_map[offset])
last_in_cluster = offset + SWAPFILE_CLUSTER;
else if (offset == last_in_cluster) {
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&si->lock);
offset -= SWAPFILE_CLUSTER - 1;
si->cluster_next = offset;
si->cluster_nr = SWAPFILE_CLUSTER - 1;
goto checks;
}
if (unlikely(--latency_ration < 0)) {
cond_resched();
latency_ration = LATENCY_LIMIT;
}
}
offset = scan_base;
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&si->lock);
si->cluster_nr = SWAPFILE_CLUSTER - 1;
}
checks:
if (!(si->flags & SWP_WRITEOK))
goto no_page;
if (!si->highest_bit)
goto no_page;
if (offset > si->highest_bit)
scan_base = offset = si->lowest_bit;
/* reuse swap entry of cache-only swap if not busy. */
if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
int swap_was_freed;
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&si->lock);
swap_was_freed = __try_to_reclaim_swap(si, offset, TTRS_ANYWAY | TTRS_DIRECT);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&si->lock);
/* entry was freed successfully, try to use this again */
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
if (swap_was_freed > 0)
goto checks;
goto scan; /* check next one */
}
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
if (si->swap_map[offset]) {
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
if (!n_ret)
goto scan;
else
goto done;
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
}
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
memset(si->swap_map + offset, usage, nr_pages);
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
swap_range_alloc(si, offset, nr_pages);
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
slots[n_ret++] = swp_entry(si->type, offset);
/* got enough slots or reach max slots? */
if ((n_ret == nr) || (offset >= si->highest_bit))
goto done;
/* search for next available slot */
/* time to take a break? */
if (unlikely(--latency_ration < 0)) {
if (n_ret)
goto done;
spin_unlock(&si->lock);
cond_resched();
spin_lock(&si->lock);
latency_ration = LATENCY_LIMIT;
}
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (si->cluster_nr && !si->swap_map[++offset]) {
/* non-ssd case, still more slots in cluster? */
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
--si->cluster_nr;
goto checks;
}
swap: try to scan more free slots even when fragmented Now, the scalability of swap code will drop much when the swap device becomes fragmented, because the swap slots allocation batching stops working. To solve the problem, in this patch, we will try to scan a little more swap slots with restricted effort to batch the swap slots allocation even if the swap device is fragmented. Test shows that the benchmark score can increase up to 37.1% with the patch. Details are as follows. The swap code has a per-cpu cache of swap slots. These batch swap space allocations to improve swap subsystem scaling. In the following code path, add_to_swap() get_swap_page() refill_swap_slots_cache() get_swap_pages() scan_swap_map_slots() scan_swap_map_slots() and get_swap_pages() can return multiple swap slots for each call. These slots will be cached in the per-CPU swap slots cache, so that several following swap slot requests will be fulfilled there to avoid the lock contention in the lower level swap space allocation/freeing code path. But this only works when there are free swap clusters. If a swap device becomes so fragmented that there's no free swap clusters, scan_swap_map_slots() and get_swap_pages() will return only one swap slot for each call in the above code path. Effectively, this falls back to the situation before the swap slots cache was introduced, the heavy lock contention on the swap related locks kills the scalability. Why does it work in this way? Because the swap device could be large, and the free swap slot scanning could be quite time consuming, to avoid taking too much time to scanning free swap slots, the conservative method was used. In fact, this can be improved via scanning a little more free slots with strictly restricted effort. Which is implemented in this patch. In scan_swap_map_slots(), after the first free swap slot is gotten, we will try to scan a little more, but only if we haven't scanned too many slots (< LATENCY_LIMIT). That is, the added scanning latency is strictly restricted. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. Multiple ram disks are configured as the swap devices. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random, so the swap space becomes highly fragmented during the test. In the original implementation, the lock contention on swap related locks is very heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock.get_swap_pages.get_swap_page.add_to_swap: 21.03 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.92 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.72 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 0.69 While after applying this patch, it becomes, _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 4.89 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 3.85 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.1 _raw_spin_lock_irqsave.pagevec_lru_move_fn.__lru_cache_add.do_swap_page: 0.88 That is, the lock contention on the swap locks is eliminated. And the pmbench score increases 37.1%. The swapin throughput increases 45.7% from 2.02 GB/s to 2.94 GB/s. While the swapout throughput increases 45.3% from 2.04 GB/s to 2.97 GB/s. Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200427030023.264780-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:49:10 +00:00
/*
* Even if there's no free clusters available (fragmented),
* try to scan a little more quickly with lock held unless we
* have scanned too many slots already.
*/
if (!scanned_many) {
unsigned long scan_limit;
if (offset < scan_base)
scan_limit = scan_base;
else
scan_limit = si->highest_bit;
for (; offset <= scan_limit && --latency_ration > 0;
offset++) {
if (!si->swap_map[offset])
goto checks;
}
}
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
done:
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
if (order == 0)
set_cluster_next(si, offset + 1);
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
si->flags -= SWP_SCANNING;
return n_ret;
scan:
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
VM_WARN_ON(order > 0);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&si->lock);
mm/swapfile: fix and annotate various data races swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. [cai@lca.pw: add a missing annotation for si->flags in memory.c] Link: http://lkml.kernel.org/r/1581612647-5958-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/1581095163-12198-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 00:31:31 +00:00
while (++offset <= READ_ONCE(si->highest_bit)) {
if (unlikely(--latency_ration < 0)) {
cond_resched();
latency_ration = LATENCY_LIMIT;
swap: try to scan more free slots even when fragmented Now, the scalability of swap code will drop much when the swap device becomes fragmented, because the swap slots allocation batching stops working. To solve the problem, in this patch, we will try to scan a little more swap slots with restricted effort to batch the swap slots allocation even if the swap device is fragmented. Test shows that the benchmark score can increase up to 37.1% with the patch. Details are as follows. The swap code has a per-cpu cache of swap slots. These batch swap space allocations to improve swap subsystem scaling. In the following code path, add_to_swap() get_swap_page() refill_swap_slots_cache() get_swap_pages() scan_swap_map_slots() scan_swap_map_slots() and get_swap_pages() can return multiple swap slots for each call. These slots will be cached in the per-CPU swap slots cache, so that several following swap slot requests will be fulfilled there to avoid the lock contention in the lower level swap space allocation/freeing code path. But this only works when there are free swap clusters. If a swap device becomes so fragmented that there's no free swap clusters, scan_swap_map_slots() and get_swap_pages() will return only one swap slot for each call in the above code path. Effectively, this falls back to the situation before the swap slots cache was introduced, the heavy lock contention on the swap related locks kills the scalability. Why does it work in this way? Because the swap device could be large, and the free swap slot scanning could be quite time consuming, to avoid taking too much time to scanning free swap slots, the conservative method was used. In fact, this can be improved via scanning a little more free slots with strictly restricted effort. Which is implemented in this patch. In scan_swap_map_slots(), after the first free swap slot is gotten, we will try to scan a little more, but only if we haven't scanned too many slots (< LATENCY_LIMIT). That is, the added scanning latency is strictly restricted. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. Multiple ram disks are configured as the swap devices. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random, so the swap space becomes highly fragmented during the test. In the original implementation, the lock contention on swap related locks is very heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock.get_swap_pages.get_swap_page.add_to_swap: 21.03 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.92 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.72 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 0.69 While after applying this patch, it becomes, _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 4.89 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 3.85 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.1 _raw_spin_lock_irqsave.pagevec_lru_move_fn.__lru_cache_add.do_swap_page: 0.88 That is, the lock contention on the swap locks is eliminated. And the pmbench score increases 37.1%. The swapin throughput increases 45.7% from 2.02 GB/s to 2.94 GB/s. While the swapout throughput increases 45.3% from 2.04 GB/s to 2.97 GB/s. Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200427030023.264780-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:49:10 +00:00
scanned_many = true;
}
swapfile: fix soft lockup in scan_swap_map_slots A softlockup occurs in scan free swap slot under huge memory pressure. The test scenario is: 64 CPU cores, 64GB memory, and 28 zram devices, the disksize of each zram device is 50MB. LATENCY_LIMIT is used to prevent softlockups in scan_swap_map_slots(), but the real loop number would more than LATENCY_LIMIT because of "goto checks and goto scan" repeatly without decreasing latency limit. In order to fix it, decrease latency_ration in advance. There is also a suspicious place that will cause softlockups in get_swap_pages(). In this function, the "goto start_over" may result in continuous scanning of the swap partition. If there is no cond_sched in scan_swap_map_slots(), it would cause a softlockup (I am not sure about this). WARN: soft lockup - CPU#11 stuck for 11s! [kswapd0:466] CPU: 11 PID: 466 Comm: kswapd@ Kdump: loaded Tainted: G dump backtrace+0x0/0x1le4 show stack+0x20/@x2c dump_stack+0xd8/0x140 watchdog print_info+0x48/0x54 watchdog_process_before_softlockup+0x98/0xa0 watchdog_timer_fn+0xlac/0x2d0 hrtimer_rum_queues+0xb0/0x130 hrtimer_interrupt+0x13c/0x3c0 arch_timer_handler_virt+0x3c/0x50 handLe_percpu_devid_irq+0x90/0x1f4 handle domain irq+0x84/0x100 gic_handle_irq+0x88/0x2b0 e11 ira+0xhB/Bx140 scan_swap_map_slots+0x678/0x890 get_swap_pages+0x29c/0x440 get_swap_page+0x120/0x2e0 add_to_swap+UX2U/0XyC shrink_page_list+0x5d0/0x152c shrink_inactive_list+0xl6c/Bx500 shrink_lruvec+0x270/0x304 WARN: soft lockup - CPU#32 stuck for 11s! [stress-ng:309915] watchdog_timer_fn+0x1ac/0x2d0 __run_hrtimer+0x98/0x2a0 __hrtimer_run_queues+0xb0/0x130 hrtimer_interrupt+0x13c/0x3c0 arch_timer_handler_virt+0x3c/0x50 handle_percpu_devid_irq+0x90/0x1f4 __handle_domain_irq+0x84/0x100 gic_handle_irq+0x88/0x2b0 el1_irq+0xb8/0x140 get_swap_pages+0x1e8/0x440 get_swap_page+0x1c8/0x2e0 add_to_swap+0x20/0x9c shrink_page_list+0x5d0/0x152c reclaim_pages+0x160/0x310 madvise_cold_or_pageout_pte_range+0x7bc/0xe3c walk_pmd_range.isra.0+0xac/0x22c walk_pud_range+0xfc/0x1c0 walk_pgd_range+0x158/0x1b0 __walk_page_range+0x64/0x100 walk_page_range+0x104/0x150 Link: https://lkml.kernel.org/r/20221118133850.3360369-1-chenwandun@huawei.com Fixes: 048c27fd7281 ("[PATCH] swap: scan_swap_map latency breaks") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: <xialonglong1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-18 13:38:50 +00:00
if (swap_offset_available_and_locked(si, offset))
goto checks;
}
offset = si->lowest_bit;
while (offset < scan_base) {
if (unlikely(--latency_ration < 0)) {
cond_resched();
latency_ration = LATENCY_LIMIT;
swap: try to scan more free slots even when fragmented Now, the scalability of swap code will drop much when the swap device becomes fragmented, because the swap slots allocation batching stops working. To solve the problem, in this patch, we will try to scan a little more swap slots with restricted effort to batch the swap slots allocation even if the swap device is fragmented. Test shows that the benchmark score can increase up to 37.1% with the patch. Details are as follows. The swap code has a per-cpu cache of swap slots. These batch swap space allocations to improve swap subsystem scaling. In the following code path, add_to_swap() get_swap_page() refill_swap_slots_cache() get_swap_pages() scan_swap_map_slots() scan_swap_map_slots() and get_swap_pages() can return multiple swap slots for each call. These slots will be cached in the per-CPU swap slots cache, so that several following swap slot requests will be fulfilled there to avoid the lock contention in the lower level swap space allocation/freeing code path. But this only works when there are free swap clusters. If a swap device becomes so fragmented that there's no free swap clusters, scan_swap_map_slots() and get_swap_pages() will return only one swap slot for each call in the above code path. Effectively, this falls back to the situation before the swap slots cache was introduced, the heavy lock contention on the swap related locks kills the scalability. Why does it work in this way? Because the swap device could be large, and the free swap slot scanning could be quite time consuming, to avoid taking too much time to scanning free swap slots, the conservative method was used. In fact, this can be improved via scanning a little more free slots with strictly restricted effort. Which is implemented in this patch. In scan_swap_map_slots(), after the first free swap slot is gotten, we will try to scan a little more, but only if we haven't scanned too many slots (< LATENCY_LIMIT). That is, the added scanning latency is strictly restricted. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. Multiple ram disks are configured as the swap devices. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random, so the swap space becomes highly fragmented during the test. In the original implementation, the lock contention on swap related locks is very heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock.get_swap_pages.get_swap_page.add_to_swap: 21.03 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.92 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.72 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 0.69 While after applying this patch, it becomes, _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 4.89 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 3.85 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.1 _raw_spin_lock_irqsave.pagevec_lru_move_fn.__lru_cache_add.do_swap_page: 0.88 That is, the lock contention on the swap locks is eliminated. And the pmbench score increases 37.1%. The swapin throughput increases 45.7% from 2.02 GB/s to 2.94 GB/s. While the swapout throughput increases 45.3% from 2.04 GB/s to 2.97 GB/s. Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200427030023.264780-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:49:10 +00:00
scanned_many = true;
}
swapfile: fix soft lockup in scan_swap_map_slots A softlockup occurs in scan free swap slot under huge memory pressure. The test scenario is: 64 CPU cores, 64GB memory, and 28 zram devices, the disksize of each zram device is 50MB. LATENCY_LIMIT is used to prevent softlockups in scan_swap_map_slots(), but the real loop number would more than LATENCY_LIMIT because of "goto checks and goto scan" repeatly without decreasing latency limit. In order to fix it, decrease latency_ration in advance. There is also a suspicious place that will cause softlockups in get_swap_pages(). In this function, the "goto start_over" may result in continuous scanning of the swap partition. If there is no cond_sched in scan_swap_map_slots(), it would cause a softlockup (I am not sure about this). WARN: soft lockup - CPU#11 stuck for 11s! [kswapd0:466] CPU: 11 PID: 466 Comm: kswapd@ Kdump: loaded Tainted: G dump backtrace+0x0/0x1le4 show stack+0x20/@x2c dump_stack+0xd8/0x140 watchdog print_info+0x48/0x54 watchdog_process_before_softlockup+0x98/0xa0 watchdog_timer_fn+0xlac/0x2d0 hrtimer_rum_queues+0xb0/0x130 hrtimer_interrupt+0x13c/0x3c0 arch_timer_handler_virt+0x3c/0x50 handLe_percpu_devid_irq+0x90/0x1f4 handle domain irq+0x84/0x100 gic_handle_irq+0x88/0x2b0 e11 ira+0xhB/Bx140 scan_swap_map_slots+0x678/0x890 get_swap_pages+0x29c/0x440 get_swap_page+0x120/0x2e0 add_to_swap+UX2U/0XyC shrink_page_list+0x5d0/0x152c shrink_inactive_list+0xl6c/Bx500 shrink_lruvec+0x270/0x304 WARN: soft lockup - CPU#32 stuck for 11s! [stress-ng:309915] watchdog_timer_fn+0x1ac/0x2d0 __run_hrtimer+0x98/0x2a0 __hrtimer_run_queues+0xb0/0x130 hrtimer_interrupt+0x13c/0x3c0 arch_timer_handler_virt+0x3c/0x50 handle_percpu_devid_irq+0x90/0x1f4 __handle_domain_irq+0x84/0x100 gic_handle_irq+0x88/0x2b0 el1_irq+0xb8/0x140 get_swap_pages+0x1e8/0x440 get_swap_page+0x1c8/0x2e0 add_to_swap+0x20/0x9c shrink_page_list+0x5d0/0x152c reclaim_pages+0x160/0x310 madvise_cold_or_pageout_pte_range+0x7bc/0xe3c walk_pmd_range.isra.0+0xac/0x22c walk_pud_range+0xfc/0x1c0 walk_pgd_range+0x158/0x1b0 __walk_page_range+0x64/0x100 walk_page_range+0x104/0x150 Link: https://lkml.kernel.org/r/20221118133850.3360369-1-chenwandun@huawei.com Fixes: 048c27fd7281 ("[PATCH] swap: scan_swap_map latency breaks") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: <xialonglong1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-18 13:38:50 +00:00
if (swap_offset_available_and_locked(si, offset))
goto checks;
offset++;
}
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&si->lock);
no_page:
si->flags -= SWP_SCANNING;
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
return n_ret;
}
int get_swap_pages(int n_goal, swp_entry_t swp_entries[], int entry_order)
{
int order = swap_entry_order(entry_order);
unsigned long size = 1 << order;
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
struct swap_info_struct *si, *next;
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
long avail_pgs;
int n_ret = 0;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
int node;
spin_lock(&swap_avail_lock);
avail_pgs = atomic_long_read(&nr_swap_pages) / size;
if (avail_pgs <= 0) {
spin_unlock(&swap_avail_lock);
goto noswap;
}
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
n_goal = min3((long)n_goal, (long)SWAP_BATCH, avail_pgs);
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
atomic_long_sub(n_goal * size, &nr_swap_pages);
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
start_over:
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
node = numa_node_id();
plist_for_each_entry_safe(si, next, &swap_avail_heads[node], avail_lists[node]) {
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
/* requeue si to after same-priority siblings */
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
plist_requeue(&si->avail_lists[node], &swap_avail_heads[node]);
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
spin_unlock(&swap_avail_lock);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&si->lock);
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
if (!si->highest_bit || !(si->flags & SWP_WRITEOK)) {
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
spin_lock(&swap_avail_lock);
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
if (plist_node_empty(&si->avail_lists[node])) {
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
spin_unlock(&si->lock);
goto nextsi;
}
WARN(!si->highest_bit,
"swap_info %d in list but !highest_bit\n",
si->type);
WARN(!(si->flags & SWP_WRITEOK),
"swap_info %d in list but !SWP_WRITEOK\n",
si->type);
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
__del_from_avail_list(si);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&si->lock);
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
goto nextsi;
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
}
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
n_ret = scan_swap_map_slots(si, SWAP_HAS_CACHE,
n_goal, swp_entries, order);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&si->lock);
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
if (n_ret || size > 1)
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
goto check_out;
cond_resched();
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
spin_lock(&swap_avail_lock);
nextsi:
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
/*
* if we got here, it's likely that si was almost full before,
* and since scan_swap_map_slots() can drop the si->lock,
* multiple callers probably all tried to get a page from the
* same si and it filled up before we could get one; or, the si
* filled up between us dropping swap_avail_lock and taking
* si->lock. Since we dropped the swap_avail_lock, the
* swap_avail_head list may have been modified; so if next is
* still in the swap_avail_head list then try it, otherwise
* start over if we have not gotten any slots.
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
*/
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
if (plist_node_empty(&next->avail_lists[node]))
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
goto start_over;
}
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
spin_unlock(&swap_avail_lock);
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
check_out:
if (n_ret < n_goal)
atomic_long_add((long)(n_goal - n_ret) * size,
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
&nr_swap_pages);
noswap:
mm/swap: allocate swap slots in batches Currently, the swap slots are allocated one page at a time, causing contention to the swap_info lock protecting the swap partition on every page being swapped. This patch adds new functions get_swap_pages and scan_swap_map_slots to request multiple swap slots at once. This will reduces the lock contention on the swap_info lock. Also scan_swap_map_slots can operate more efficiently as swap slots often occurs in clusters close to each other on a swap device and it is quicker to allocate them together. Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:33 +00:00
return n_ret;
}
static struct swap_info_struct *_swap_info_get(swp_entry_t entry)
{
struct swap_info_struct *si;
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
unsigned long offset;
if (!entry.val)
goto out;
si = swp_swap_info(entry);
if (!si)
goto bad_nofile;
if (data_race(!(si->flags & SWP_USED)))
goto bad_device;
offset = swp_offset(entry);
if (offset >= si->max)
goto bad_offset;
if (data_race(!si->swap_map[swp_offset(entry)]))
goto bad_free;
return si;
bad_free:
pr_err("%s: %s%08lx\n", __func__, Unused_offset, entry.val);
goto out;
bad_offset:
pr_err("%s: %s%08lx\n", __func__, Bad_offset, entry.val);
goto out;
bad_device:
pr_err("%s: %s%08lx\n", __func__, Unused_file, entry.val);
goto out;
bad_nofile:
pr_err("%s: %s%08lx\n", __func__, Bad_file, entry.val);
out:
return NULL;
}
static struct swap_info_struct *swap_info_get_cont(swp_entry_t entry,
struct swap_info_struct *q)
{
struct swap_info_struct *p;
p = _swap_info_get(entry);
if (p != q) {
if (q != NULL)
spin_unlock(&q->lock);
if (p != NULL)
spin_lock(&p->lock);
}
return p;
}
static unsigned char __swap_entry_free_locked(struct swap_info_struct *si,
unsigned long offset,
unsigned char usage)
{
unsigned char count;
unsigned char has_cache;
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
count = si->swap_map[offset];
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
has_cache = count & SWAP_HAS_CACHE;
count &= ~SWAP_HAS_CACHE;
if (usage == SWAP_HAS_CACHE) {
VM_BUG_ON(!has_cache);
has_cache = 0;
} else if (count == SWAP_MAP_SHMEM) {
/*
* Or we could insist on shmem.c using a special
* swap_shmem_free() and free_shmem_swap_and_cache()...
*/
count = 0;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
} else if ((count & ~COUNT_CONTINUED) <= SWAP_MAP_MAX) {
if (count == COUNT_CONTINUED) {
if (swap_count_continued(si, offset, count))
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
count = SWAP_MAP_MAX | COUNT_CONTINUED;
else
count = SWAP_MAP_MAX;
} else
count--;
}
usage = count | has_cache;
mm/swapfile: fix and annotate various data races swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. [cai@lca.pw: add a missing annotation for si->flags in memory.c] Link: http://lkml.kernel.org/r/1581612647-5958-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/1581095163-12198-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 00:31:31 +00:00
if (usage)
WRITE_ONCE(si->swap_map[offset], usage);
mm/swapfile: fix and annotate various data races swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. [cai@lca.pw: add a missing annotation for si->flags in memory.c] Link: http://lkml.kernel.org/r/1581612647-5958-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/1581095163-12198-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15 00:31:31 +00:00
else
WRITE_ONCE(si->swap_map[offset], SWAP_HAS_CACHE);
return usage;
}
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
/*
* When we get a swap entry, if there aren't some other ways to
* prevent swapoff, such as the folio in swap cache is locked, RCU
* reader side is locked, etc., the swap entry may become invalid
* because of swapoff. Then, we need to enclose all swap related
* functions with get_swap_device() and put_swap_device(), unless the
* swap functions call get/put_swap_device() by themselves.
*
* RCU reader side lock (including any spinlock) is sufficient to
* prevent swapoff, because synchronize_rcu() is called in swapoff()
* before freeing data structures.
mm: swap: fix race between free_swap_and_cache() and swapoff() There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in free_swap_and_cache(). Details of how to provoke one possible issue (thanks to David Hildenbrand for deriving this): --8<----- __swap_entry_free() might be the last user and result in "count == SWAP_HAS_CACHE". swapoff->try_to_unuse() will stop as soon as soon as si->inuse_pages==0. So the question is: could someone reclaim the folio and turn si->inuse_pages==0, before we completed swap_page_trans_huge_swapped(). Imagine the following: 2 MiB folio in the swapcache. Only 2 subpages are still references by swap entries. Process 1 still references subpage 0 via swap entry. Process 2 still references subpage 1 via swap entry. Process 1 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE [then, preempted in the hypervisor etc.] Process 2 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE Process 2 goes ahead, passes swap_page_trans_huge_swapped(), and calls __try_to_reclaim_swap(). __try_to_reclaim_swap()->folio_free_swap()->delete_from_swap_cache()-> put_swap_folio()->free_swap_slot()->swapcache_free_entries()-> swap_entry_free()->swap_range_free()-> ... WRITE_ONCE(si->inuse_pages, si->inuse_pages - nr_entries); What stops swapoff to succeed after process 2 reclaimed the swap cache but before process1 finished its call to swap_page_trans_huge_swapped()? --8<----- Link: https://lkml.kernel.org/r/20240306140356.3974886-1-ryan.roberts@arm.com Fixes: 7c00bafee87c ("mm/swap: free swap slots in batch") Closes: https://lore.kernel.org/linux-mm/65a66eb9-41f8-4790-8db2-0c70ea15979f@redhat.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06 14:03:56 +00:00
*
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
* Check whether swap entry is valid in the swap device. If so,
* return pointer to swap_info_struct, and keep the swap entry valid
* via preventing the swap device from being swapoff, until
* put_swap_device() is called. Otherwise return NULL.
*
* Notice that swapoff or swapoff+swapon can still happen before the
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
* percpu_ref_tryget_live() in get_swap_device() or after the
* percpu_ref_put() in put_swap_device() if there isn't any other way
* to prevent swapoff. The caller must be prepared for that. For
* example, the following situation is possible.
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
*
* CPU1 CPU2
* do_swap_page()
* ... swapoff+swapon
* __read_swap_cache_async()
* swapcache_prepare()
* __swap_duplicate()
* // check swap_map
* // verify PTE not changed
*
* In __swap_duplicate(), the swap_map need to be checked before
* changing partly because the specified swap entry may be for another
* swap device which has been swapoff. And in do_swap_page(), after
* the page is read from the swap device, the PTE is verified not
* changed with the page table locked to check whether the swap device
* has been swapoff or swapoff+swapon.
*/
struct swap_info_struct *get_swap_device(swp_entry_t entry)
{
struct swap_info_struct *si;
unsigned long offset;
if (!entry.val)
goto out;
si = swp_swap_info(entry);
if (!si)
goto bad_nofile;
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
if (!percpu_ref_tryget_live(&si->users))
goto out;
/*
* Guarantee the si->users are checked before accessing other
* fields of swap_info_struct.
*
* Paired with the spin_unlock() after setup_swap_info() in
* enable_swap_info().
*/
smp_rmb();
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
offset = swp_offset(entry);
if (offset >= si->max)
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
goto put_out;
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
return si;
bad_nofile:
pr_err("%s: %s%08lx\n", __func__, Bad_file, entry.val);
out:
return NULL;
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
put_out:
pr_err("%s: %s%08lx\n", __func__, Bad_offset, entry.val);
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
percpu_ref_put(&si->users);
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
return NULL;
}
static unsigned char __swap_entry_free(struct swap_info_struct *si,
swp_entry_t entry)
{
struct swap_cluster_info *ci;
unsigned long offset = swp_offset(entry);
unsigned char usage;
ci = lock_cluster_or_swap_info(si, offset);
usage = __swap_entry_free_locked(si, offset, 1);
unlock_cluster_or_swap_info(si, ci);
if (!usage)
free_swap_slot(entry);
return usage;
}
mm: attempt to batch free swap entries for zap_pte_range() Zhiguo reported that swap release could be a serious bottleneck during process exits[1]. With mTHP, we have the opportunity to batch free swaps. Thanks to the work of Chris and Kairui[2], I was able to achieve this optimization with minimal code changes by building on their efforts. If swap_count is 1, which is likely true as most anon memory are private, we can free all contiguous swap slots all together. Ran the below test program for measuring the bandwidth of munmap using zRAM and 64KiB mTHP: #include <sys/mman.h> #include <sys/time.h> #include <stdlib.h> unsigned long long tv_to_ms(struct timeval tv) { return tv.tv_sec * 1000 + tv.tv_usec / 1000; } main() { struct timeval tv_b, tv_e; int i; #define SIZE 1024*1024*1024 void *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (!p) { perror("fail to get memory"); exit(-1); } madvise(p, SIZE, MADV_HUGEPAGE); memset(p, 0x11, SIZE); /* write to get mem */ madvise(p, SIZE, MADV_PAGEOUT); gettimeofday(&tv_b, NULL); munmap(p, SIZE); gettimeofday(&tv_e, NULL); printf("munmap in bandwidth: %ld bytes/ms\n", SIZE/(tv_to_ms(tv_e) - tv_to_ms(tv_b))); } The result is as below (munmap bandwidth): mm-unstable mm-unstable-with-patch round1 21053761 63161283 round2 21053761 63161283 round3 21053761 63161283 round4 20648881 67108864 round5 20648881 67108864 munmap bandwidth becomes 3X faster. [1] https://lore.kernel.org/linux-mm/20240731133318.527-1-justinjiang@vivo.com/ [2] https://lore.kernel.org/linux-mm/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org/ [v-songbaohua@oppo.com: check all swaps belong to same swap_cgroup in swap_pte_batch()] Link: https://lkml.kernel.org/r/20240815215308.55233-1-21cnbao@gmail.com [hughd@google.com: add mem_cgroup_disabled() check] Link: https://lkml.kernel.org/r/33f34a88-0130-5444-9b84-93198eeb50e7@google.com [21cnbao@gmail.com: add missing zswap_invalidate()] Link: https://lkml.kernel.org/r/20240821054921.43468-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240807215859.57491-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Kairui Song <kasong@tencent.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Barry Song <baohua@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07 21:58:59 +00:00
static bool __swap_entries_free(struct swap_info_struct *si,
swp_entry_t entry, int nr)
{
unsigned long offset = swp_offset(entry);
unsigned int type = swp_type(entry);
struct swap_cluster_info *ci;
bool has_cache = false;
unsigned char count;
int i;
if (nr <= 1 || swap_count(data_race(si->swap_map[offset])) != 1)
goto fallback;
/* cross into another cluster */
if (nr > SWAPFILE_CLUSTER - offset % SWAPFILE_CLUSTER)
goto fallback;
ci = lock_cluster_or_swap_info(si, offset);
if (!swap_is_last_map(si, offset, nr, &has_cache)) {
unlock_cluster_or_swap_info(si, ci);
goto fallback;
}
for (i = 0; i < nr; i++)
WRITE_ONCE(si->swap_map[offset + i], SWAP_HAS_CACHE);
unlock_cluster_or_swap_info(si, ci);
if (!has_cache) {
for (i = 0; i < nr; i++)
zswap_invalidate(swp_entry(si->type, offset + i));
spin_lock(&si->lock);
swap_entry_range_free(si, entry, nr);
spin_unlock(&si->lock);
}
return has_cache;
fallback:
for (i = 0; i < nr; i++) {
if (data_race(si->swap_map[offset + i])) {
count = __swap_entry_free(si, swp_entry(type, offset + i));
if (count == SWAP_HAS_CACHE)
has_cache = true;
} else {
WARN_ON_ONCE(1);
}
}
return has_cache;
}
/*
* Drop the last HAS_CACHE flag of swap entries, caller have to
* ensure all entries belong to the same cgroup.
*/
static void swap_entry_range_free(struct swap_info_struct *si, swp_entry_t entry,
unsigned int nr_pages)
{
unsigned long offset = swp_offset(entry);
unsigned char *map = si->swap_map + offset;
unsigned char *map_end = map + nr_pages;
struct swap_cluster_info *ci;
ci = lock_cluster(si, offset);
do {
VM_BUG_ON(*map != SWAP_HAS_CACHE);
*map = 0;
} while (++map < map_end);
dec_cluster_info_page(si, ci, nr_pages);
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
unlock_cluster(ci);
mem_cgroup_uncharge_swap(entry, nr_pages);
swap_range_free(si, offset, nr_pages);
}
static void cluster_swap_free_nr(struct swap_info_struct *si,
unsigned long offset, int nr_pages,
unsigned char usage)
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
{
struct swap_cluster_info *ci;
DECLARE_BITMAP(to_free, BITS_PER_LONG) = { 0 };
int i, nr;
ci = lock_cluster_or_swap_info(si, offset);
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
while (nr_pages) {
nr = min(BITS_PER_LONG, nr_pages);
for (i = 0; i < nr; i++) {
if (!__swap_entry_free_locked(si, offset + i, usage))
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
bitmap_set(to_free, i, 1);
}
if (!bitmap_empty(to_free, BITS_PER_LONG)) {
unlock_cluster_or_swap_info(si, ci);
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
for_each_set_bit(i, to_free, BITS_PER_LONG)
free_swap_slot(swp_entry(si->type, offset + i));
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
if (nr == nr_pages)
return;
bitmap_clear(to_free, 0, BITS_PER_LONG);
ci = lock_cluster_or_swap_info(si, offset);
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
}
offset += nr;
nr_pages -= nr;
}
unlock_cluster_or_swap_info(si, ci);
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
}
mm: remove the implementation of swap_free() and always use swap_free_nr() To streamline maintenance efforts, we propose removing the implementation of swap_free(). Instead, we can simply invoke swap_free_nr() with nr set to 1. swap_free_nr() is designed with a bitmap consisting of only one long, resulting in overhead that can be ignored for cases where nr equals 1. A prime candidate for leveraging swap_free_nr() lies within kernel/power/swap.c. Implementing this change facilitates the adoption of batch processing for hibernation. Link: https://lkml.kernel.org/r/20240529082824.150954-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chuanhua Han <hanchuanhua@oppo.com> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:20 +00:00
/*
* Caller has made sure that the swap device corresponding to entry
* is still around or has not been recycled.
*/
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
void swap_free_nr(swp_entry_t entry, int nr_pages)
{
int nr;
struct swap_info_struct *sis;
unsigned long offset = swp_offset(entry);
sis = _swap_info_get(entry);
if (!sis)
return;
while (nr_pages) {
nr = min_t(int, nr_pages, SWAPFILE_CLUSTER - offset % SWAPFILE_CLUSTER);
cluster_swap_free_nr(sis, offset, nr, 1);
mm: swap: introduce swap_free_nr() for batched swap_free() Patch series "large folios swap-in: handle refault cases first", v5. This patchset is extracted from the large folio swapin series[1], primarily addressing the handling of scenarios involving large folios in the swap cache. Currently, it is particularly focused on addressing the refaulting of mTHP, which is still undergoing reclamation. This approach aims to streamline code review and expedite the integration of this segment into the MM tree. It relies on Ryan's swap-out series[2], leveraging the helper function swap_pte_batch() introduced by that series. Presently, do_swap_page only encounters a large folio in the swap cache before the large folio is released by vmscan. However, the code should remain equally useful once we support large folio swap-in via swapin_readahead(). This approach can effectively reduce page faults and eliminate most redundant checks and early exits for MTE restoration in recent MTE patchset[3]. The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will be split into separate patch sets and sent at a later time. [1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/ This patch (of 6): While swapping in a large folio, we need to free swaps related to the whole folio. To avoid frequently acquiring and releasing swap locks, it is better to introduce an API for batched free. Furthermore, this new function, swap_free_nr(), is designed to efficiently handle various scenarios for releasing a specified number, nr, of swap entries. Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-29 08:28:19 +00:00
offset += nr;
nr_pages -= nr;
}
}
/*
* Called after dropping swapcache to decrease refcnt to swap entries.
*/
void put_swap_folio(struct folio *folio, swp_entry_t entry)
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
{
unsigned long offset = swp_offset(entry);
struct swap_cluster_info *ci;
struct swap_info_struct *si;
int size = 1 << swap_entry_order(folio_order(folio));
mm/swapfile.c: replace some #ifdef with IS_ENABLED() In mm/swapfile.c, THP (Transparent Huge Page) swap specific code is enclosed by #ifdef CONFIG_THP_SWAP/#endif to avoid code dilating when THP isn't enabled. But #ifdef/#endif in .c file hurt the code readability, so Dave suggested to use IS_ENABLED(CONFIG_THP_SWAP) instead and let compiler to do the dirty job for us. This has potential to remove some duplicated code too. From output of `size`, text data bss dec hex filename THP=y: 26269 2076 340 28685 700d mm/swapfile.o ifdef/endif: 24115 2028 340 26483 6773 mm/swapfile.o IS_ENABLED: 24179 2028 340 26547 67b3 mm/swapfile.o IS_ENABLED() based solution works quite well, almost as good as that of #ifdef/#endif. And from the diffstat, the removed lines are more than added lines. One #ifdef for split_swap_cluster() is kept. Because it is a public function with a stub implementation for CONFIG_THP_SWAP=n in swap.h. Link: http://lkml.kernel.org/r/20180720071845.17920-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:05 +00:00
mm, THP, swap: support to clear swap cache flag for THP swapped out Patch series "mm, THP, swap: Delay splitting THP after swapped out", v3. This is the second step of THP (Transparent Huge Page) swap optimization. In the first step, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. In the second step, the splitting is delayed further to after the swapping out finished. The plan is to delay splitting THP step by step, finally avoid splitting THP for the THP swapping out and swap out/in the THP as a whole. In the patchset, more operations for the anonymous THP reclaiming, such as TLB flushing, writing the THP to the swap device, removing the THP from the swap cache are batched. So that the performance of anonymous THP swapping out are improved. During the development, the following scenarios/code paths have been checked, - swap out/in - swap off - write protect page fault - madvise_free - process exit - split huge page With the patchset, the swap out throughput improves 42% (from about 5.81GB/s to about 8.25GB/s) in the vm-scalability swap-w-seq test case with 16 processes. At the same time, the IPI (reflect TLB flushing) reduced about 78.9%. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. Below is the part of the cover letter for the first step patchset of THP swap optimization which applies to all steps. ========================= Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce TLB flushing and lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patch (of 12): Previously, swapcache_free_cluster() is used only in the error path of shrink_page_list() to free the swap cluster just allocated if the THP (Transparent Huge Page) is failed to be split. In this patch, it is enhanced to clear the swap cache flag (SWAP_HAS_CACHE) for the swap cluster that holds the contents of THP swapped out. This will be used in delaying splitting THP after swapping out support. Because there is no THP swapping in as a whole support yet, after clearing the swap cache flag, the swap cluster backing the THP swapped out will be split. So that the swap slots in the swap cluster can be swapped in as normal pages later. Link: http://lkml.kernel.org/r/20170724051840.2309-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:12 +00:00
si = _swap_info_get(entry);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
if (!si)
return;
mm/swapfile.c: put_swap_page: share more between huge/normal code path In this patch, locking related code is shared between huge/normal code path in put_swap_page() to reduce code duplication. The `free_entries == 0` case is merged into the more general `free_entries != SWAPFILE_CLUSTER` case, because the new locking method makes it easy. The added lines is same as the removed lines. But the code size is increased when CONFIG_TRANSPARENT_HUGEPAGE=n. text data bss dec hex filename base: 24123 2004 340 26467 6763 mm/swapfile.o unified: 24485 2004 340 26829 68cd mm/swapfile.o Dig on step deeper with `size -A mm/swapfile.o` for base and unified kernel and compare the result, yields, -.text 17723 0 +.text 17835 0 -.orc_unwind_ip 1380 0 +.orc_unwind_ip 1480 0 -.orc_unwind 2070 0 +.orc_unwind 2220 0 -Total 26686 +Total 27048 The total difference is the same. The text segment difference is much smaller: 112. More difference comes from the ORC unwinder segments: (1480 + 2220) - (1380 + 2070) = 250. If the frame pointer unwinder is used, this costs nothing. Link: http://lkml.kernel.org/r/20180720071845.17920-9-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:29 +00:00
ci = lock_cluster_or_swap_info(si, offset);
if (size > 1 && swap_is_has_cache(si, offset, size)) {
unlock_cluster_or_swap_info(si, ci);
spin_lock(&si->lock);
swap_entry_range_free(si, entry, size);
spin_unlock(&si->lock);
return;
}
for (int i = 0; i < size; i++, entry.val++) {
mm/swapfile.c: put_swap_page: share more between huge/normal code path In this patch, locking related code is shared between huge/normal code path in put_swap_page() to reduce code duplication. The `free_entries == 0` case is merged into the more general `free_entries != SWAPFILE_CLUSTER` case, because the new locking method makes it easy. The added lines is same as the removed lines. But the code size is increased when CONFIG_TRANSPARENT_HUGEPAGE=n. text data bss dec hex filename base: 24123 2004 340 26467 6763 mm/swapfile.o unified: 24485 2004 340 26829 68cd mm/swapfile.o Dig on step deeper with `size -A mm/swapfile.o` for base and unified kernel and compare the result, yields, -.text 17723 0 +.text 17835 0 -.orc_unwind_ip 1380 0 +.orc_unwind_ip 1480 0 -.orc_unwind 2070 0 +.orc_unwind 2220 0 -Total 26686 +Total 27048 The total difference is the same. The text segment difference is much smaller: 112. More difference comes from the ORC unwinder segments: (1480 + 2220) - (1380 + 2070) = 250. If the frame pointer unwinder is used, this costs nothing. Link: http://lkml.kernel.org/r/20180720071845.17920-9-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:29 +00:00
if (!__swap_entry_free_locked(si, offset + i, SWAP_HAS_CACHE)) {
unlock_cluster_or_swap_info(si, ci);
free_swap_slot(entry);
if (i == size - 1)
return;
lock_cluster_or_swap_info(si, offset);
mm, THP, swap: support to clear swap cache flag for THP swapped out Patch series "mm, THP, swap: Delay splitting THP after swapped out", v3. This is the second step of THP (Transparent Huge Page) swap optimization. In the first step, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. In the second step, the splitting is delayed further to after the swapping out finished. The plan is to delay splitting THP step by step, finally avoid splitting THP for the THP swapping out and swap out/in the THP as a whole. In the patchset, more operations for the anonymous THP reclaiming, such as TLB flushing, writing the THP to the swap device, removing the THP from the swap cache are batched. So that the performance of anonymous THP swapping out are improved. During the development, the following scenarios/code paths have been checked, - swap out/in - swap off - write protect page fault - madvise_free - process exit - split huge page With the patchset, the swap out throughput improves 42% (from about 5.81GB/s to about 8.25GB/s) in the vm-scalability swap-w-seq test case with 16 processes. At the same time, the IPI (reflect TLB flushing) reduced about 78.9%. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. Below is the part of the cover letter for the first step patchset of THP swap optimization which applies to all steps. ========================= Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce TLB flushing and lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patch (of 12): Previously, swapcache_free_cluster() is used only in the error path of shrink_page_list() to free the swap cluster just allocated if the THP (Transparent Huge Page) is failed to be split. In this patch, it is enhanced to clear the swap cache flag (SWAP_HAS_CACHE) for the swap cluster that holds the contents of THP swapped out. This will be used in delaying splitting THP after swapping out support. Because there is no THP swapping in as a whole support yet, after clearing the swap cache flag, the swap cluster backing the THP swapped out will be split. So that the swap slots in the swap cluster can be swapped in as normal pages later. Link: http://lkml.kernel.org/r/20170724051840.2309-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:12 +00:00
}
}
mm/swapfile.c: put_swap_page: share more between huge/normal code path In this patch, locking related code is shared between huge/normal code path in put_swap_page() to reduce code duplication. The `free_entries == 0` case is merged into the more general `free_entries != SWAPFILE_CLUSTER` case, because the new locking method makes it easy. The added lines is same as the removed lines. But the code size is increased when CONFIG_TRANSPARENT_HUGEPAGE=n. text data bss dec hex filename base: 24123 2004 340 26467 6763 mm/swapfile.o unified: 24485 2004 340 26829 68cd mm/swapfile.o Dig on step deeper with `size -A mm/swapfile.o` for base and unified kernel and compare the result, yields, -.text 17723 0 +.text 17835 0 -.orc_unwind_ip 1380 0 +.orc_unwind_ip 1480 0 -.orc_unwind 2070 0 +.orc_unwind 2220 0 -Total 26686 +Total 27048 The total difference is the same. The text segment difference is much smaller: 112. More difference comes from the ORC unwinder segments: (1480 + 2220) - (1380 + 2070) = 250. If the frame pointer unwinder is used, this costs nothing. Link: http://lkml.kernel.org/r/20180720071845.17920-9-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:52:29 +00:00
unlock_cluster_or_swap_info(si, ci);
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:37:18 +00:00
}
mm/swapfile.c: sort swap entries before free To reduce the lock contention of swap_info_struct->lock when freeing swap entry. The freed swap entries will be collected in a per-CPU buffer firstly, and be really freed later in batch. During the batch freeing, if the consecutive swap entries in the per-CPU buffer belongs to same swap device, the swap_info_struct->lock needs to be acquired/released only once, so that the lock contention could be reduced greatly. But if there are multiple swap devices, it is possible that the lock may be unnecessarily released/acquired because the swap entries belong to the same swap device are non-consecutive in the per-CPU buffer. To solve the issue, the per-CPU buffer is sorted according to the swap device before freeing the swap entries. With the patch, the memory (some swapped out) free time reduced 11.6% (from 2.65s to 2.35s) in the vm-scalability swap-w-rand test case with 16 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test swapping, the test case creates 16 processes, which allocate and write to the anonymous pages until the RAM and part of the swap device is used up, finally the memory (some swapped out) is freed before exit. [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/20170525005916.25249-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:40:31 +00:00
static int swp_entry_cmp(const void *ent1, const void *ent2)
{
const swp_entry_t *e1 = ent1, *e2 = ent2;
return (int)swp_type(*e1) - (int)swp_type(*e2);
}
void swapcache_free_entries(swp_entry_t *entries, int n)
{
struct swap_info_struct *p, *prev;
int i;
if (n <= 0)
return;
prev = NULL;
p = NULL;
mm/swapfile.c: sort swap entries before free To reduce the lock contention of swap_info_struct->lock when freeing swap entry. The freed swap entries will be collected in a per-CPU buffer firstly, and be really freed later in batch. During the batch freeing, if the consecutive swap entries in the per-CPU buffer belongs to same swap device, the swap_info_struct->lock needs to be acquired/released only once, so that the lock contention could be reduced greatly. But if there are multiple swap devices, it is possible that the lock may be unnecessarily released/acquired because the swap entries belong to the same swap device are non-consecutive in the per-CPU buffer. To solve the issue, the per-CPU buffer is sorted according to the swap device before freeing the swap entries. With the patch, the memory (some swapped out) free time reduced 11.6% (from 2.65s to 2.35s) in the vm-scalability swap-w-rand test case with 16 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test swapping, the test case creates 16 processes, which allocate and write to the anonymous pages until the RAM and part of the swap device is used up, finally the memory (some swapped out) is freed before exit. [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/20170525005916.25249-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:40:31 +00:00
/*
* Sort swap entries by swap device, so each lock is only taken once.
* nr_swapfiles isn't absolutely correct, but the overhead of sort() is
* so low that it isn't necessary to optimize further.
*/
if (nr_swapfiles > 1)
sort(entries, n, sizeof(entries[0]), swp_entry_cmp, NULL);
for (i = 0; i < n; ++i) {
p = swap_info_get_cont(entries[i], prev);
if (p)
swap_entry_range_free(p, entries[i], 1);
prev = p;
}
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
if (p)
spin_unlock(&p->lock);
}
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
int __swap_count(swp_entry_t entry)
{
swap: remove get/put_swap_device() in __swap_count() Patch series "swap: cleanup get/put_swap_device() usage", v3. The general rule to use a swap entry is as follows. When we get a swap entry, if there aren't some other ways to prevent swapoff, such as the folio in swap cache is locked, page table lock is held, etc., the swap entry may become invalid because of swapoff. Then, we need to enclose all swap related functions with get_swap_device() and put_swap_device(), unless the swap functions call get/put_swap_device() by themselves. Based on the above rule, all get/put_swap_device() usage are checked and cleaned up if necessary. This patch (of 5): get/put_swap_device() are added to __swap_count() in commit eb085574a752 ("mm, swap: fix race between swapoff and some swap operations"). Later, in commit 2799e77529c2 ("swap: fix do_swap_page() race with swapoff"), get/put_swap_device() are added to do_swap_page(). And they enclose the only call site of __swap_count(). So, it's safe to remove get/put_swap_device() in __swap_count() now. Link: https://lkml.kernel.org/r/20230529061355.125791-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20230529061355.125791-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Chris Li (Google) <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-29 06:13:51 +00:00
struct swap_info_struct *si = swp_swap_info(entry);
pgoff_t offset = swp_offset(entry);
swap: remove get/put_swap_device() in __swap_count() Patch series "swap: cleanup get/put_swap_device() usage", v3. The general rule to use a swap entry is as follows. When we get a swap entry, if there aren't some other ways to prevent swapoff, such as the folio in swap cache is locked, page table lock is held, etc., the swap entry may become invalid because of swapoff. Then, we need to enclose all swap related functions with get_swap_device() and put_swap_device(), unless the swap functions call get/put_swap_device() by themselves. Based on the above rule, all get/put_swap_device() usage are checked and cleaned up if necessary. This patch (of 5): get/put_swap_device() are added to __swap_count() in commit eb085574a752 ("mm, swap: fix race between swapoff and some swap operations"). Later, in commit 2799e77529c2 ("swap: fix do_swap_page() race with swapoff"), get/put_swap_device() are added to do_swap_page(). And they enclose the only call site of __swap_count(). So, it's safe to remove get/put_swap_device() in __swap_count() now. Link: https://lkml.kernel.org/r/20230529061355.125791-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20230529061355.125791-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Chris Li (Google) <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-29 06:13:51 +00:00
return swap_count(si->swap_map[offset]);
}
/*
* How many references to @entry are currently swapped out?
* This does not give an exact answer when swap count is continued,
* but does include the high COUNT_CONTINUED flag to allow for that.
*/
int swap_swapcount(struct swap_info_struct *si, swp_entry_t entry)
mm, swap: Fix a race in free_swap_and_cache() Before using cluster lock in free_swap_and_cache(), the swap_info_struct->lock will be held during freeing the swap entry and acquiring page lock, so the page swap count will not change when testing page information later. But after using cluster lock, the cluster lock (or swap_info_struct->lock) will be held only during freeing the swap entry. So before acquiring the page lock, the page swap count may be changed in another thread. If the page swap count is not 0, we should not delete the page from the swap cache. This is fixed via checking page swap count again after acquiring the page lock. I found the race when I review the code, so I didn't trigger the race via a test program. If the race occurs for an anonymous page shared by multiple processes via fork, multiple pages will be allocated and swapped in from the swap device for the previously shared one page. That is, the user-visible runtime effect is more memory will be used and the access latency for the page will be higher, that is, the performance regression. Link: http://lkml.kernel.org/r/20170301143905.12846-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Tim Chen <tim.c.chen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 21:52:49 +00:00
{
pgoff_t offset = swp_offset(entry);
struct swap_cluster_info *ci;
int count;
mm, swap: Fix a race in free_swap_and_cache() Before using cluster lock in free_swap_and_cache(), the swap_info_struct->lock will be held during freeing the swap entry and acquiring page lock, so the page swap count will not change when testing page information later. But after using cluster lock, the cluster lock (or swap_info_struct->lock) will be held only during freeing the swap entry. So before acquiring the page lock, the page swap count may be changed in another thread. If the page swap count is not 0, we should not delete the page from the swap cache. This is fixed via checking page swap count again after acquiring the page lock. I found the race when I review the code, so I didn't trigger the race via a test program. If the race occurs for an anonymous page shared by multiple processes via fork, multiple pages will be allocated and swapped in from the swap device for the previously shared one page. That is, the user-visible runtime effect is more memory will be used and the access latency for the page will be higher, that is, the performance regression. Link: http://lkml.kernel.org/r/20170301143905.12846-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Tim Chen <tim.c.chen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 21:52:49 +00:00
ci = lock_cluster_or_swap_info(si, offset);
count = swap_count(si->swap_map[offset]);
unlock_cluster_or_swap_info(si, ci);
return count;
}
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:00:24 +00:00
/*
* How many references to @entry are currently swapped out?
* This considers COUNT_CONTINUED so it returns exact answer.
*/
int swp_swapcount(swp_entry_t entry)
{
int count, tmp_count, n;
struct swap_info_struct *si;
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
struct swap_cluster_info *ci;
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:00:24 +00:00
struct page *page;
pgoff_t offset;
unsigned char *map;
si = _swap_info_get(entry);
if (!si)
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:00:24 +00:00
return 0;
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
offset = swp_offset(entry);
ci = lock_cluster_or_swap_info(si, offset);
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
count = swap_count(si->swap_map[offset]);
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:00:24 +00:00
if (!(count & COUNT_CONTINUED))
goto out;
count &= ~COUNT_CONTINUED;
n = SWAP_MAP_MAX + 1;
page = vmalloc_to_page(si->swap_map + offset);
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:00:24 +00:00
offset &= ~PAGE_MASK;
VM_BUG_ON(page_private(page) != SWP_CONTINUED);
do {
page = list_next_entry(page, lru);
map = kmap_local_page(page);
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:00:24 +00:00
tmp_count = map[offset];
kunmap_local(map);
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:00:24 +00:00
count += (tmp_count & ~COUNT_CONTINUED) * n;
n *= (SWAP_CONT_MAX + 1);
} while (tmp_count & COUNT_CONTINUED);
out:
unlock_cluster_or_swap_info(si, ci);
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:00:24 +00:00
return count;
}
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
static bool swap_page_trans_huge_swapped(struct swap_info_struct *si,
mm: swap: remove CLUSTER_FLAG_HUGE from swap_cluster_info:flags Patch series "Swap-out mTHP without splitting", v7. This series adds support for swapping out multi-size THP (mTHP) without needing to first split the large folio via split_huge_page_to_list_to_order(). It closely follows the approach already used to swap-out PMD-sized THP. There are a couple of reasons for swapping out mTHP without splitting: - Performance: It is expensive to split a large folio and under extreme memory pressure some workloads regressed performance when using 64K mTHP vs 4K small folios because of this extra cost in the swap-out path. This series not only eliminates the regression but makes it faster to swap out 64K mTHP vs 4K small folios. - Memory fragmentation avoidance: If we can avoid splitting a large folio memory is less likely to become fragmented, making it easier to re-allocate a large folio in future. - Performance: Enables a separate series [7] to swap-in whole mTHPs, which means we won't lose the TLB-efficiency benefits of mTHP once the memory has been through a swap cycle. I've done what I thought was the smallest change possible, and as a result, this approach is only employed when the swap is backed by a non-rotating block device (just as PMD-sized THP is supported today). Discussion against the RFC concluded that this is sufficient. Performance Testing =================== I've run some swap performance tests on Ampere Altra VM (arm64) with 8 CPUs. The VM is set up with a 35G block ram device as the swap device and the test is run from inside a memcg limited to 40G memory. I've then run `usemem` from vm-scalability with 70 processes, each allocating and writing 1G of memory. I've repeated everything 6 times and taken the mean performance improvement relative to 4K page baseline: | alloc size | baseline | + this series | | | mm-unstable (~v6.9-rc1) | | |:-----------|------------------------:|------------------------:| | 4K Page | 0.0% | 1.3% | | 64K THP | -13.6% | 46.3% | | 2M THP | 91.4% | 89.6% | So with this change, the 64K swap performance goes from a 14% regression to a 46% improvement. While 2M shows a small regression I'm confident that this is just noise. [1] https://lore.kernel.org/linux-mm/20231010142111.3997780-1-ryan.roberts@arm.com/ [2] https://lore.kernel.org/linux-mm/20231017161302.2518826-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20231025144546.577640-1-ryan.roberts@arm.com/ [4] https://lore.kernel.org/linux-mm/20240311150058.1122862-1-ryan.roberts@arm.com/ [5] https://lore.kernel.org/linux-mm/20240327144537.4165578-1-ryan.roberts@arm.com/ [6] https://lore.kernel.org/linux-mm/20240403114032.1162100-1-ryan.roberts@arm.com/ [7] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [8] https://lore.kernel.org/linux-mm/CAGsJ_4yMOow27WDvN2q=E4HAtDd2PJ=OQ5Pj9DG+6FLWwNuXUw@mail.gmail.com/ [9] https://lore.kernel.org/linux-mm/579d5127-c763-4001-9625-4563a9316ac3@redhat.com/ This patch (of 7): As preparation for supporting small-sized THP in the swap-out path, without first needing to split to order-0, Remove the CLUSTER_FLAG_HUGE, which, when present, always implies PMD-sized THP, which is the same as the cluster size. The only use of the flag was to determine whether a swap entry refers to a single page or a PMD-sized THP in swap_page_trans_huge_swapped(). Instead of relying on the flag, we now pass in order, which originates from the folio's order. This allows the logic to work for folios of any order. The one snag is that one of the swap_page_trans_huge_swapped() call sites does not have the folio. But it was only being called there to shortcut a call __try_to_reclaim_swap() in some cases. __try_to_reclaim_swap() gets the folio and (via some other functions) calls swap_page_trans_huge_swapped(). So I've removed the problematic call site and believe the new logic should be functionally equivalent. That said, removing the fast path means that we will take a reference and trylock a large folio much more often, which we would like to avoid. The next patch will solve this. Removing CLUSTER_FLAG_HUGE also means we can remove split_swap_cluster() which used to be called during folio splitting, since split_swap_cluster()'s only job was to remove the flag. Link: https://lkml.kernel.org/r/20240408183946.2991168-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-2-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:40 +00:00
swp_entry_t entry, int order)
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
{
struct swap_cluster_info *ci;
unsigned char *map = si->swap_map;
mm: swap: remove CLUSTER_FLAG_HUGE from swap_cluster_info:flags Patch series "Swap-out mTHP without splitting", v7. This series adds support for swapping out multi-size THP (mTHP) without needing to first split the large folio via split_huge_page_to_list_to_order(). It closely follows the approach already used to swap-out PMD-sized THP. There are a couple of reasons for swapping out mTHP without splitting: - Performance: It is expensive to split a large folio and under extreme memory pressure some workloads regressed performance when using 64K mTHP vs 4K small folios because of this extra cost in the swap-out path. This series not only eliminates the regression but makes it faster to swap out 64K mTHP vs 4K small folios. - Memory fragmentation avoidance: If we can avoid splitting a large folio memory is less likely to become fragmented, making it easier to re-allocate a large folio in future. - Performance: Enables a separate series [7] to swap-in whole mTHPs, which means we won't lose the TLB-efficiency benefits of mTHP once the memory has been through a swap cycle. I've done what I thought was the smallest change possible, and as a result, this approach is only employed when the swap is backed by a non-rotating block device (just as PMD-sized THP is supported today). Discussion against the RFC concluded that this is sufficient. Performance Testing =================== I've run some swap performance tests on Ampere Altra VM (arm64) with 8 CPUs. The VM is set up with a 35G block ram device as the swap device and the test is run from inside a memcg limited to 40G memory. I've then run `usemem` from vm-scalability with 70 processes, each allocating and writing 1G of memory. I've repeated everything 6 times and taken the mean performance improvement relative to 4K page baseline: | alloc size | baseline | + this series | | | mm-unstable (~v6.9-rc1) | | |:-----------|------------------------:|------------------------:| | 4K Page | 0.0% | 1.3% | | 64K THP | -13.6% | 46.3% | | 2M THP | 91.4% | 89.6% | So with this change, the 64K swap performance goes from a 14% regression to a 46% improvement. While 2M shows a small regression I'm confident that this is just noise. [1] https://lore.kernel.org/linux-mm/20231010142111.3997780-1-ryan.roberts@arm.com/ [2] https://lore.kernel.org/linux-mm/20231017161302.2518826-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20231025144546.577640-1-ryan.roberts@arm.com/ [4] https://lore.kernel.org/linux-mm/20240311150058.1122862-1-ryan.roberts@arm.com/ [5] https://lore.kernel.org/linux-mm/20240327144537.4165578-1-ryan.roberts@arm.com/ [6] https://lore.kernel.org/linux-mm/20240403114032.1162100-1-ryan.roberts@arm.com/ [7] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [8] https://lore.kernel.org/linux-mm/CAGsJ_4yMOow27WDvN2q=E4HAtDd2PJ=OQ5Pj9DG+6FLWwNuXUw@mail.gmail.com/ [9] https://lore.kernel.org/linux-mm/579d5127-c763-4001-9625-4563a9316ac3@redhat.com/ This patch (of 7): As preparation for supporting small-sized THP in the swap-out path, without first needing to split to order-0, Remove the CLUSTER_FLAG_HUGE, which, when present, always implies PMD-sized THP, which is the same as the cluster size. The only use of the flag was to determine whether a swap entry refers to a single page or a PMD-sized THP in swap_page_trans_huge_swapped(). Instead of relying on the flag, we now pass in order, which originates from the folio's order. This allows the logic to work for folios of any order. The one snag is that one of the swap_page_trans_huge_swapped() call sites does not have the folio. But it was only being called there to shortcut a call __try_to_reclaim_swap() in some cases. __try_to_reclaim_swap() gets the folio and (via some other functions) calls swap_page_trans_huge_swapped(). So I've removed the problematic call site and believe the new logic should be functionally equivalent. That said, removing the fast path means that we will take a reference and trylock a large folio much more often, which we would like to avoid. The next patch will solve this. Removing CLUSTER_FLAG_HUGE also means we can remove split_swap_cluster() which used to be called during folio splitting, since split_swap_cluster()'s only job was to remove the flag. Link: https://lkml.kernel.org/r/20240408183946.2991168-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-2-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:40 +00:00
unsigned int nr_pages = 1 << order;
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
unsigned long roffset = swp_offset(entry);
mm: swap: remove CLUSTER_FLAG_HUGE from swap_cluster_info:flags Patch series "Swap-out mTHP without splitting", v7. This series adds support for swapping out multi-size THP (mTHP) without needing to first split the large folio via split_huge_page_to_list_to_order(). It closely follows the approach already used to swap-out PMD-sized THP. There are a couple of reasons for swapping out mTHP without splitting: - Performance: It is expensive to split a large folio and under extreme memory pressure some workloads regressed performance when using 64K mTHP vs 4K small folios because of this extra cost in the swap-out path. This series not only eliminates the regression but makes it faster to swap out 64K mTHP vs 4K small folios. - Memory fragmentation avoidance: If we can avoid splitting a large folio memory is less likely to become fragmented, making it easier to re-allocate a large folio in future. - Performance: Enables a separate series [7] to swap-in whole mTHPs, which means we won't lose the TLB-efficiency benefits of mTHP once the memory has been through a swap cycle. I've done what I thought was the smallest change possible, and as a result, this approach is only employed when the swap is backed by a non-rotating block device (just as PMD-sized THP is supported today). Discussion against the RFC concluded that this is sufficient. Performance Testing =================== I've run some swap performance tests on Ampere Altra VM (arm64) with 8 CPUs. The VM is set up with a 35G block ram device as the swap device and the test is run from inside a memcg limited to 40G memory. I've then run `usemem` from vm-scalability with 70 processes, each allocating and writing 1G of memory. I've repeated everything 6 times and taken the mean performance improvement relative to 4K page baseline: | alloc size | baseline | + this series | | | mm-unstable (~v6.9-rc1) | | |:-----------|------------------------:|------------------------:| | 4K Page | 0.0% | 1.3% | | 64K THP | -13.6% | 46.3% | | 2M THP | 91.4% | 89.6% | So with this change, the 64K swap performance goes from a 14% regression to a 46% improvement. While 2M shows a small regression I'm confident that this is just noise. [1] https://lore.kernel.org/linux-mm/20231010142111.3997780-1-ryan.roberts@arm.com/ [2] https://lore.kernel.org/linux-mm/20231017161302.2518826-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20231025144546.577640-1-ryan.roberts@arm.com/ [4] https://lore.kernel.org/linux-mm/20240311150058.1122862-1-ryan.roberts@arm.com/ [5] https://lore.kernel.org/linux-mm/20240327144537.4165578-1-ryan.roberts@arm.com/ [6] https://lore.kernel.org/linux-mm/20240403114032.1162100-1-ryan.roberts@arm.com/ [7] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [8] https://lore.kernel.org/linux-mm/CAGsJ_4yMOow27WDvN2q=E4HAtDd2PJ=OQ5Pj9DG+6FLWwNuXUw@mail.gmail.com/ [9] https://lore.kernel.org/linux-mm/579d5127-c763-4001-9625-4563a9316ac3@redhat.com/ This patch (of 7): As preparation for supporting small-sized THP in the swap-out path, without first needing to split to order-0, Remove the CLUSTER_FLAG_HUGE, which, when present, always implies PMD-sized THP, which is the same as the cluster size. The only use of the flag was to determine whether a swap entry refers to a single page or a PMD-sized THP in swap_page_trans_huge_swapped(). Instead of relying on the flag, we now pass in order, which originates from the folio's order. This allows the logic to work for folios of any order. The one snag is that one of the swap_page_trans_huge_swapped() call sites does not have the folio. But it was only being called there to shortcut a call __try_to_reclaim_swap() in some cases. __try_to_reclaim_swap() gets the folio and (via some other functions) calls swap_page_trans_huge_swapped(). So I've removed the problematic call site and believe the new logic should be functionally equivalent. That said, removing the fast path means that we will take a reference and trylock a large folio much more often, which we would like to avoid. The next patch will solve this. Removing CLUSTER_FLAG_HUGE also means we can remove split_swap_cluster() which used to be called during folio splitting, since split_swap_cluster()'s only job was to remove the flag. Link: https://lkml.kernel.org/r/20240408183946.2991168-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-2-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:40 +00:00
unsigned long offset = round_down(roffset, nr_pages);
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
int i;
bool ret = false;
ci = lock_cluster_or_swap_info(si, offset);
mm: swap: remove CLUSTER_FLAG_HUGE from swap_cluster_info:flags Patch series "Swap-out mTHP without splitting", v7. This series adds support for swapping out multi-size THP (mTHP) without needing to first split the large folio via split_huge_page_to_list_to_order(). It closely follows the approach already used to swap-out PMD-sized THP. There are a couple of reasons for swapping out mTHP without splitting: - Performance: It is expensive to split a large folio and under extreme memory pressure some workloads regressed performance when using 64K mTHP vs 4K small folios because of this extra cost in the swap-out path. This series not only eliminates the regression but makes it faster to swap out 64K mTHP vs 4K small folios. - Memory fragmentation avoidance: If we can avoid splitting a large folio memory is less likely to become fragmented, making it easier to re-allocate a large folio in future. - Performance: Enables a separate series [7] to swap-in whole mTHPs, which means we won't lose the TLB-efficiency benefits of mTHP once the memory has been through a swap cycle. I've done what I thought was the smallest change possible, and as a result, this approach is only employed when the swap is backed by a non-rotating block device (just as PMD-sized THP is supported today). Discussion against the RFC concluded that this is sufficient. Performance Testing =================== I've run some swap performance tests on Ampere Altra VM (arm64) with 8 CPUs. The VM is set up with a 35G block ram device as the swap device and the test is run from inside a memcg limited to 40G memory. I've then run `usemem` from vm-scalability with 70 processes, each allocating and writing 1G of memory. I've repeated everything 6 times and taken the mean performance improvement relative to 4K page baseline: | alloc size | baseline | + this series | | | mm-unstable (~v6.9-rc1) | | |:-----------|------------------------:|------------------------:| | 4K Page | 0.0% | 1.3% | | 64K THP | -13.6% | 46.3% | | 2M THP | 91.4% | 89.6% | So with this change, the 64K swap performance goes from a 14% regression to a 46% improvement. While 2M shows a small regression I'm confident that this is just noise. [1] https://lore.kernel.org/linux-mm/20231010142111.3997780-1-ryan.roberts@arm.com/ [2] https://lore.kernel.org/linux-mm/20231017161302.2518826-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20231025144546.577640-1-ryan.roberts@arm.com/ [4] https://lore.kernel.org/linux-mm/20240311150058.1122862-1-ryan.roberts@arm.com/ [5] https://lore.kernel.org/linux-mm/20240327144537.4165578-1-ryan.roberts@arm.com/ [6] https://lore.kernel.org/linux-mm/20240403114032.1162100-1-ryan.roberts@arm.com/ [7] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [8] https://lore.kernel.org/linux-mm/CAGsJ_4yMOow27WDvN2q=E4HAtDd2PJ=OQ5Pj9DG+6FLWwNuXUw@mail.gmail.com/ [9] https://lore.kernel.org/linux-mm/579d5127-c763-4001-9625-4563a9316ac3@redhat.com/ This patch (of 7): As preparation for supporting small-sized THP in the swap-out path, without first needing to split to order-0, Remove the CLUSTER_FLAG_HUGE, which, when present, always implies PMD-sized THP, which is the same as the cluster size. The only use of the flag was to determine whether a swap entry refers to a single page or a PMD-sized THP in swap_page_trans_huge_swapped(). Instead of relying on the flag, we now pass in order, which originates from the folio's order. This allows the logic to work for folios of any order. The one snag is that one of the swap_page_trans_huge_swapped() call sites does not have the folio. But it was only being called there to shortcut a call __try_to_reclaim_swap() in some cases. __try_to_reclaim_swap() gets the folio and (via some other functions) calls swap_page_trans_huge_swapped(). So I've removed the problematic call site and believe the new logic should be functionally equivalent. That said, removing the fast path means that we will take a reference and trylock a large folio much more often, which we would like to avoid. The next patch will solve this. Removing CLUSTER_FLAG_HUGE also means we can remove split_swap_cluster() which used to be called during folio splitting, since split_swap_cluster()'s only job was to remove the flag. Link: https://lkml.kernel.org/r/20240408183946.2991168-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-2-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:40 +00:00
if (!ci || nr_pages == 1) {
if (swap_count(map[roffset]))
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
ret = true;
goto unlock_out;
}
mm: swap: remove CLUSTER_FLAG_HUGE from swap_cluster_info:flags Patch series "Swap-out mTHP without splitting", v7. This series adds support for swapping out multi-size THP (mTHP) without needing to first split the large folio via split_huge_page_to_list_to_order(). It closely follows the approach already used to swap-out PMD-sized THP. There are a couple of reasons for swapping out mTHP without splitting: - Performance: It is expensive to split a large folio and under extreme memory pressure some workloads regressed performance when using 64K mTHP vs 4K small folios because of this extra cost in the swap-out path. This series not only eliminates the regression but makes it faster to swap out 64K mTHP vs 4K small folios. - Memory fragmentation avoidance: If we can avoid splitting a large folio memory is less likely to become fragmented, making it easier to re-allocate a large folio in future. - Performance: Enables a separate series [7] to swap-in whole mTHPs, which means we won't lose the TLB-efficiency benefits of mTHP once the memory has been through a swap cycle. I've done what I thought was the smallest change possible, and as a result, this approach is only employed when the swap is backed by a non-rotating block device (just as PMD-sized THP is supported today). Discussion against the RFC concluded that this is sufficient. Performance Testing =================== I've run some swap performance tests on Ampere Altra VM (arm64) with 8 CPUs. The VM is set up with a 35G block ram device as the swap device and the test is run from inside a memcg limited to 40G memory. I've then run `usemem` from vm-scalability with 70 processes, each allocating and writing 1G of memory. I've repeated everything 6 times and taken the mean performance improvement relative to 4K page baseline: | alloc size | baseline | + this series | | | mm-unstable (~v6.9-rc1) | | |:-----------|------------------------:|------------------------:| | 4K Page | 0.0% | 1.3% | | 64K THP | -13.6% | 46.3% | | 2M THP | 91.4% | 89.6% | So with this change, the 64K swap performance goes from a 14% regression to a 46% improvement. While 2M shows a small regression I'm confident that this is just noise. [1] https://lore.kernel.org/linux-mm/20231010142111.3997780-1-ryan.roberts@arm.com/ [2] https://lore.kernel.org/linux-mm/20231017161302.2518826-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20231025144546.577640-1-ryan.roberts@arm.com/ [4] https://lore.kernel.org/linux-mm/20240311150058.1122862-1-ryan.roberts@arm.com/ [5] https://lore.kernel.org/linux-mm/20240327144537.4165578-1-ryan.roberts@arm.com/ [6] https://lore.kernel.org/linux-mm/20240403114032.1162100-1-ryan.roberts@arm.com/ [7] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [8] https://lore.kernel.org/linux-mm/CAGsJ_4yMOow27WDvN2q=E4HAtDd2PJ=OQ5Pj9DG+6FLWwNuXUw@mail.gmail.com/ [9] https://lore.kernel.org/linux-mm/579d5127-c763-4001-9625-4563a9316ac3@redhat.com/ This patch (of 7): As preparation for supporting small-sized THP in the swap-out path, without first needing to split to order-0, Remove the CLUSTER_FLAG_HUGE, which, when present, always implies PMD-sized THP, which is the same as the cluster size. The only use of the flag was to determine whether a swap entry refers to a single page or a PMD-sized THP in swap_page_trans_huge_swapped(). Instead of relying on the flag, we now pass in order, which originates from the folio's order. This allows the logic to work for folios of any order. The one snag is that one of the swap_page_trans_huge_swapped() call sites does not have the folio. But it was only being called there to shortcut a call __try_to_reclaim_swap() in some cases. __try_to_reclaim_swap() gets the folio and (via some other functions) calls swap_page_trans_huge_swapped(). So I've removed the problematic call site and believe the new logic should be functionally equivalent. That said, removing the fast path means that we will take a reference and trylock a large folio much more often, which we would like to avoid. The next patch will solve this. Removing CLUSTER_FLAG_HUGE also means we can remove split_swap_cluster() which used to be called during folio splitting, since split_swap_cluster()'s only job was to remove the flag. Link: https://lkml.kernel.org/r/20240408183946.2991168-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-2-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:40 +00:00
for (i = 0; i < nr_pages; i++) {
if (swap_count(map[offset + i])) {
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
ret = true;
break;
}
}
unlock_out:
unlock_cluster_or_swap_info(si, ci);
return ret;
}
static bool folio_swapped(struct folio *folio)
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
{
swp_entry_t entry = folio->swap;
struct swap_info_struct *si = _swap_info_get(entry);
if (!si)
return false;
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
if (!IS_ENABLED(CONFIG_THP_SWAP) || likely(!folio_test_large(folio)))
return swap_swapcount(si, entry) != 0;
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
mm: swap: remove CLUSTER_FLAG_HUGE from swap_cluster_info:flags Patch series "Swap-out mTHP without splitting", v7. This series adds support for swapping out multi-size THP (mTHP) without needing to first split the large folio via split_huge_page_to_list_to_order(). It closely follows the approach already used to swap-out PMD-sized THP. There are a couple of reasons for swapping out mTHP without splitting: - Performance: It is expensive to split a large folio and under extreme memory pressure some workloads regressed performance when using 64K mTHP vs 4K small folios because of this extra cost in the swap-out path. This series not only eliminates the regression but makes it faster to swap out 64K mTHP vs 4K small folios. - Memory fragmentation avoidance: If we can avoid splitting a large folio memory is less likely to become fragmented, making it easier to re-allocate a large folio in future. - Performance: Enables a separate series [7] to swap-in whole mTHPs, which means we won't lose the TLB-efficiency benefits of mTHP once the memory has been through a swap cycle. I've done what I thought was the smallest change possible, and as a result, this approach is only employed when the swap is backed by a non-rotating block device (just as PMD-sized THP is supported today). Discussion against the RFC concluded that this is sufficient. Performance Testing =================== I've run some swap performance tests on Ampere Altra VM (arm64) with 8 CPUs. The VM is set up with a 35G block ram device as the swap device and the test is run from inside a memcg limited to 40G memory. I've then run `usemem` from vm-scalability with 70 processes, each allocating and writing 1G of memory. I've repeated everything 6 times and taken the mean performance improvement relative to 4K page baseline: | alloc size | baseline | + this series | | | mm-unstable (~v6.9-rc1) | | |:-----------|------------------------:|------------------------:| | 4K Page | 0.0% | 1.3% | | 64K THP | -13.6% | 46.3% | | 2M THP | 91.4% | 89.6% | So with this change, the 64K swap performance goes from a 14% regression to a 46% improvement. While 2M shows a small regression I'm confident that this is just noise. [1] https://lore.kernel.org/linux-mm/20231010142111.3997780-1-ryan.roberts@arm.com/ [2] https://lore.kernel.org/linux-mm/20231017161302.2518826-1-ryan.roberts@arm.com/ [3] https://lore.kernel.org/linux-mm/20231025144546.577640-1-ryan.roberts@arm.com/ [4] https://lore.kernel.org/linux-mm/20240311150058.1122862-1-ryan.roberts@arm.com/ [5] https://lore.kernel.org/linux-mm/20240327144537.4165578-1-ryan.roberts@arm.com/ [6] https://lore.kernel.org/linux-mm/20240403114032.1162100-1-ryan.roberts@arm.com/ [7] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/ [8] https://lore.kernel.org/linux-mm/CAGsJ_4yMOow27WDvN2q=E4HAtDd2PJ=OQ5Pj9DG+6FLWwNuXUw@mail.gmail.com/ [9] https://lore.kernel.org/linux-mm/579d5127-c763-4001-9625-4563a9316ac3@redhat.com/ This patch (of 7): As preparation for supporting small-sized THP in the swap-out path, without first needing to split to order-0, Remove the CLUSTER_FLAG_HUGE, which, when present, always implies PMD-sized THP, which is the same as the cluster size. The only use of the flag was to determine whether a swap entry refers to a single page or a PMD-sized THP in swap_page_trans_huge_swapped(). Instead of relying on the flag, we now pass in order, which originates from the folio's order. This allows the logic to work for folios of any order. The one snag is that one of the swap_page_trans_huge_swapped() call sites does not have the folio. But it was only being called there to shortcut a call __try_to_reclaim_swap() in some cases. __try_to_reclaim_swap() gets the folio and (via some other functions) calls swap_page_trans_huge_swapped(). So I've removed the problematic call site and believe the new logic should be functionally equivalent. That said, removing the fast path means that we will take a reference and trylock a large folio much more often, which we would like to avoid. The next patch will solve this. Removing CLUSTER_FLAG_HUGE also means we can remove split_swap_cluster() which used to be called during folio splitting, since split_swap_cluster()'s only job was to remove the flag. Link: https://lkml.kernel.org/r/20240408183946.2991168-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-2-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:40 +00:00
return swap_page_trans_huge_swapped(si, entry, folio_order(folio));
mm, THP, swap: support to reclaim swap space for THP swapped out The normal swap slot reclaiming can be done when the swap count reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP, all swap slots backing one THP must be reclaimed together, because the swap slot may be used again when the THP is swapped out again later. So the swap slots backing one THP can be reclaimed together when the swap count for all swap slots for the THP reached SWAP_HAS_CACHE. In the patch, the functions to check whether the swap count for all swap slots backing one THP reached SWAP_HAS_CACHE are implemented and used when checking whether a swap slot can be reclaimed. To make it easier to determine whether a swap slot is backing a THP, a new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap cluster which is backing a THP (Transparent Huge Page). Because THP swap in as a whole isn't supported now. After deleting the THP from the swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE flag will be cleared. So that, the normal pages inside THP can be swapped in individually. [ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD] Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:22:16 +00:00
}
static bool folio_swapcache_freeable(struct folio *folio)
{
VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio);
if (!folio_test_swapcache(folio))
return false;
if (folio_test_writeback(folio))
return false;
/*
* Once hibernation has begun to create its image of memory,
* there's a danger that one of the calls to folio_free_swap()
* - most probably a call from __try_to_reclaim_swap() while
* hibernation is allocating its own swap pages for the image,
* but conceivably even a call from memory reclaim - will free
* the swap from a folio which has already been recorded in the
* image as a clean swapcache folio, and then reuse its swap for
* another page of the image. On waking from hibernation, the
* original folio might be freed under memory pressure, then
* later read back in from swap, now with the wrong data.
*
* Hibernation suspends storage while it is writing the image
mm: avoid livelock on !__GFP_FS allocations Colin Cross reported; Under the following conditions, __alloc_pages_slowpath can loop forever: gfp_mask & __GFP_WAIT is true gfp_mask & __GFP_FS is false reclaim and compaction make no progress order <= PAGE_ALLOC_COSTLY_ORDER These conditions happen very often during suspend and resume, when pm_restrict_gfp_mask() effectively converts all GFP_KERNEL allocations into __GFP_WAIT. The oom killer is not run because gfp_mask & __GFP_FS is false, but should_alloc_retry will always return true when order is less than PAGE_ALLOC_COSTLY_ORDER. In his fix, he avoided retrying the allocation if reclaim made no progress and __GFP_FS was not set. The problem is that this would result in GFP_NOIO allocations failing that previously succeeded which would be very unfortunate. The big difference between GFP_NOIO and suspend converting GFP_KERNEL to behave like GFP_NOIO is that normally flushers will be cleaning pages and kswapd reclaims pages allowing GFP_NOIO to succeed after a short delay. The same does not necessarily apply during suspend as the storage device may be suspended. This patch special cases the suspend case to fail the page allocation if reclaim cannot make progress and adds some documentation on how gfp_allowed_mask is currently used. Failing allocations like this may cause suspend to abort but that is better than a livelock. [mgorman@suse.de: Rework fix to be suspend specific] [rientjes@google.com: Move suspended device check to should_alloc_retry] Reported-by: Colin Cross <ccross@android.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:07:15 +00:00
* to disk so check that here.
*/
mm: avoid livelock on !__GFP_FS allocations Colin Cross reported; Under the following conditions, __alloc_pages_slowpath can loop forever: gfp_mask & __GFP_WAIT is true gfp_mask & __GFP_FS is false reclaim and compaction make no progress order <= PAGE_ALLOC_COSTLY_ORDER These conditions happen very often during suspend and resume, when pm_restrict_gfp_mask() effectively converts all GFP_KERNEL allocations into __GFP_WAIT. The oom killer is not run because gfp_mask & __GFP_FS is false, but should_alloc_retry will always return true when order is less than PAGE_ALLOC_COSTLY_ORDER. In his fix, he avoided retrying the allocation if reclaim made no progress and __GFP_FS was not set. The problem is that this would result in GFP_NOIO allocations failing that previously succeeded which would be very unfortunate. The big difference between GFP_NOIO and suspend converting GFP_KERNEL to behave like GFP_NOIO is that normally flushers will be cleaning pages and kswapd reclaims pages allowing GFP_NOIO to succeed after a short delay. The same does not necessarily apply during suspend as the storage device may be suspended. This patch special cases the suspend case to fail the page allocation if reclaim cannot make progress and adds some documentation on how gfp_allowed_mask is currently used. Failing allocations like this may cause suspend to abort but that is better than a livelock. [mgorman@suse.de: Rework fix to be suspend specific] [rientjes@google.com: Move suspended device check to should_alloc_retry] Reported-by: Colin Cross <ccross@android.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 23:07:15 +00:00
if (pm_suspended_storage())
return false;
return true;
}
/**
* folio_free_swap() - Free the swap space used for this folio.
* @folio: The folio to remove.
*
* If swap is getting full, or if there are no more mappings of this folio,
* then call folio_free_swap to free its swap space.
*
* Return: true if we were able to release the swap space.
*/
bool folio_free_swap(struct folio *folio)
{
if (!folio_swapcache_freeable(folio))
return false;
if (folio_swapped(folio))
return false;
delete_from_swap_cache(folio);
folio_set_dirty(folio);
return true;
}
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
/**
* free_swap_and_cache_nr() - Release reference on range of swap entries and
* reclaim their cache if no more references remain.
* @entry: First entry of range.
* @nr: Number of entries in range.
*
* For each swap entry in the contiguous range, release a reference. If any swap
* entries become free, try to reclaim their underlying folios, if present. The
* offset range is defined by [entry.offset, entry.offset + nr).
*/
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
void free_swap_and_cache_nr(swp_entry_t entry, int nr)
{
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
const unsigned long start_offset = swp_offset(entry);
const unsigned long end_offset = start_offset + nr;
struct swap_info_struct *si;
bool any_only_cache = false;
unsigned long offset;
if (non_swap_entry(entry))
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
return;
si = get_swap_device(entry);
if (!si)
return;
if (WARN_ON(end_offset > si->max))
goto out;
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
/*
* First free all entries in the range.
*/
mm: attempt to batch free swap entries for zap_pte_range() Zhiguo reported that swap release could be a serious bottleneck during process exits[1]. With mTHP, we have the opportunity to batch free swaps. Thanks to the work of Chris and Kairui[2], I was able to achieve this optimization with minimal code changes by building on their efforts. If swap_count is 1, which is likely true as most anon memory are private, we can free all contiguous swap slots all together. Ran the below test program for measuring the bandwidth of munmap using zRAM and 64KiB mTHP: #include <sys/mman.h> #include <sys/time.h> #include <stdlib.h> unsigned long long tv_to_ms(struct timeval tv) { return tv.tv_sec * 1000 + tv.tv_usec / 1000; } main() { struct timeval tv_b, tv_e; int i; #define SIZE 1024*1024*1024 void *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (!p) { perror("fail to get memory"); exit(-1); } madvise(p, SIZE, MADV_HUGEPAGE); memset(p, 0x11, SIZE); /* write to get mem */ madvise(p, SIZE, MADV_PAGEOUT); gettimeofday(&tv_b, NULL); munmap(p, SIZE); gettimeofday(&tv_e, NULL); printf("munmap in bandwidth: %ld bytes/ms\n", SIZE/(tv_to_ms(tv_e) - tv_to_ms(tv_b))); } The result is as below (munmap bandwidth): mm-unstable mm-unstable-with-patch round1 21053761 63161283 round2 21053761 63161283 round3 21053761 63161283 round4 20648881 67108864 round5 20648881 67108864 munmap bandwidth becomes 3X faster. [1] https://lore.kernel.org/linux-mm/20240731133318.527-1-justinjiang@vivo.com/ [2] https://lore.kernel.org/linux-mm/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org/ [v-songbaohua@oppo.com: check all swaps belong to same swap_cgroup in swap_pte_batch()] Link: https://lkml.kernel.org/r/20240815215308.55233-1-21cnbao@gmail.com [hughd@google.com: add mem_cgroup_disabled() check] Link: https://lkml.kernel.org/r/33f34a88-0130-5444-9b84-93198eeb50e7@google.com [21cnbao@gmail.com: add missing zswap_invalidate()] Link: https://lkml.kernel.org/r/20240821054921.43468-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240807215859.57491-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Kairui Song <kasong@tencent.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Barry Song <baohua@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-07 21:58:59 +00:00
any_only_cache = __swap_entries_free(si, entry, nr);
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
/*
* Short-circuit the below loop if none of the entries had their
* reference drop to zero.
*/
if (!any_only_cache)
goto out;
mm: swap: fix race between free_swap_and_cache() and swapoff() There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in free_swap_and_cache(). Details of how to provoke one possible issue (thanks to David Hildenbrand for deriving this): --8<----- __swap_entry_free() might be the last user and result in "count == SWAP_HAS_CACHE". swapoff->try_to_unuse() will stop as soon as soon as si->inuse_pages==0. So the question is: could someone reclaim the folio and turn si->inuse_pages==0, before we completed swap_page_trans_huge_swapped(). Imagine the following: 2 MiB folio in the swapcache. Only 2 subpages are still references by swap entries. Process 1 still references subpage 0 via swap entry. Process 2 still references subpage 1 via swap entry. Process 1 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE [then, preempted in the hypervisor etc.] Process 2 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE Process 2 goes ahead, passes swap_page_trans_huge_swapped(), and calls __try_to_reclaim_swap(). __try_to_reclaim_swap()->folio_free_swap()->delete_from_swap_cache()-> put_swap_folio()->free_swap_slot()->swapcache_free_entries()-> swap_entry_free()->swap_range_free()-> ... WRITE_ONCE(si->inuse_pages, si->inuse_pages - nr_entries); What stops swapoff to succeed after process 2 reclaimed the swap cache but before process1 finished its call to swap_page_trans_huge_swapped()? --8<----- Link: https://lkml.kernel.org/r/20240306140356.3974886-1-ryan.roberts@arm.com Fixes: 7c00bafee87c ("mm/swap: free swap slots in batch") Closes: https://lore.kernel.org/linux-mm/65a66eb9-41f8-4790-8db2-0c70ea15979f@redhat.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06 14:03:56 +00:00
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
/*
* Now go back over the range trying to reclaim the swap cache. This is
* more efficient for large folios because we will only try to reclaim
* the swap once per folio in the common case. If we do
* __swap_entry_free() and __try_to_reclaim_swap() in the same loop, the
* latter will get a reference and lock the folio for every individual
* page but will only succeed once the swap slot for every subpage is
* zero.
*/
for (offset = start_offset; offset < end_offset; offset += nr) {
nr = 1;
if (READ_ONCE(si->swap_map[offset]) == SWAP_HAS_CACHE) {
/*
* Folios are always naturally aligned in swap so
* advance forward to the next boundary. Zero means no
* folio was found for the swap entry, so advance by 1
* in this case. Negative value means folio was found
* but could not be reclaimed. Here we can still advance
* to the next boundary.
*/
nr = __try_to_reclaim_swap(si, offset,
TTRS_UNMAPPED | TTRS_FULL);
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
if (nr == 0)
nr = 1;
else if (nr < 0)
nr = -nr;
nr = ALIGN(offset + 1, nr) - offset;
}
}
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache() Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:41 +00:00
out:
put_swap_device(si);
}
#ifdef CONFIG_HIBERNATION
swp_entry_t get_swap_page_of_type(int type)
{
struct swap_info_struct *si = swap_type_to_swap_info(type);
swp_entry_t entry = {0};
if (!si)
goto fail;
/* This is called for allocating swap entry, not cache */
spin_lock(&si->lock);
mm: swap: allow storage of all mTHP orders Multi-size THP enables performance improvements by allocating large, pte-mapped folios for anonymous memory. However I've observed that on an arm64 system running a parallel workload (e.g. kernel compilation) across many cores, under high memory pressure, the speed regresses. This is due to bottlenecking on the increased number of TLBIs added due to all the extra folio splitting when the large folios are swapped out. Therefore, solve this regression by adding support for swapping out mTHP without needing to split the folio, just like is already done for PMD-sized THP. This change only applies when CONFIG_THP_SWAP is enabled, and when the swap backing store is a non-rotating block device. These are the same constraints as for the existing PMD-sized THP swap-out support. Note that no attempt is made to swap-in (m)THP here - this is still done page-by-page, like for PMD-sized THP. But swapping-out mTHP is a prerequisite for swapping-in mTHP. The main change here is to improve the swap entry allocator so that it can allocate any power-of-2 number of contiguous entries between [1, (1 << PMD_ORDER)]. This is done by allocating a cluster for each distinct order and allocating sequentially from it until the cluster is full. This ensures that we don't need to search the map and we get no fragmentation due to alignment padding for different orders in the cluster. If there is no current cluster for a given order, we attempt to allocate a free cluster from the list. If there are no free clusters, we fail the allocation and the caller can fall back to splitting the folio and allocates individual entries (as per existing PMD-sized THP fallback). The per-order current clusters are maintained per-cpu using the existing infrastructure. This is done to avoid interleving pages from different tasks, which would prevent IO being batched. This is already done for the order-0 allocations so we follow the same pattern. As is done for order-0 per-cpu clusters, the scanner now can steal order-0 entries from any per-cpu-per-order reserved cluster. This ensures that when the swap file is getting full, space doesn't get tied up in the per-cpu reserves. This change only modifies swap to be able to accept any order mTHP. It doesn't change the callers to elide doing the actual split. That will be done in separate changes. Link: https://lkml.kernel.org/r/20240408183946.2991168-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-08 18:39:44 +00:00
if ((si->flags & SWP_WRITEOK) && scan_swap_map_slots(si, 1, 1, &entry, 0))
atomic_long_dec(&nr_swap_pages);
spin_unlock(&si->lock);
fail:
return entry;
}
/*
2006-12-07 04:34:07 +00:00
* Find the swap type that corresponds to given device (if any).
*
2006-12-07 04:34:07 +00:00
* @offset - number of the PAGE_SIZE-sized block of the device, starting
* from 0, in which the swap header is expected to be located.
*
* This is needed for the suspend to disk (aka swsusp).
*/
int swap_type_of(dev_t device, sector_t offset)
{
int type;
if (!device)
return -1;
2006-12-07 04:34:07 +00:00
spin_lock(&swap_lock);
for (type = 0; type < nr_swapfiles; type++) {
struct swap_info_struct *sis = swap_info[type];
2006-12-07 04:34:07 +00:00
if (!(sis->flags & SWP_WRITEOK))
continue;
if (device == sis->bdev->bd_dev) {
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
struct swap_extent *se = first_se(sis);
2006-12-07 04:34:07 +00:00
if (se->start_block == offset) {
spin_unlock(&swap_lock);
return type;
2006-12-07 04:34:07 +00:00
}
}
}
spin_unlock(&swap_lock);
return -ENODEV;
}
2006-12-07 04:34:07 +00:00
int find_first_swap(dev_t *device)
{
int type;
2006-12-07 04:34:07 +00:00
spin_lock(&swap_lock);
for (type = 0; type < nr_swapfiles; type++) {
struct swap_info_struct *sis = swap_info[type];
if (!(sis->flags & SWP_WRITEOK))
continue;
*device = sis->bdev->bd_dev;
spin_unlock(&swap_lock);
return type;
}
spin_unlock(&swap_lock);
return -ENODEV;
}
/*
* Get the (PAGE_SIZE) block corresponding to given offset on the swapdev
* corresponding to given index in swap_info (swap type).
*/
sector_t swapdev_block(int type, pgoff_t offset)
{
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
struct swap_info_struct *si = swap_type_to_swap_info(type);
struct swap_extent *se;
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
if (!si || !(si->flags & SWP_WRITEOK))
return 0;
se = offset_to_swap_extent(si, offset);
return se->start_block + (offset - se->start_page);
}
/*
* Return either the total number of swap pages of given type, or the number
* of free pages of that type (depending on @free)
*
* This is needed for software suspend
*/
unsigned int count_swap_pages(int type, int free)
{
unsigned int n = 0;
spin_lock(&swap_lock);
if ((unsigned int)type < nr_swapfiles) {
struct swap_info_struct *sis = swap_info[type];
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&sis->lock);
if (sis->flags & SWP_WRITEOK) {
n = sis->pages;
if (free)
n -= sis->inuse_pages;
}
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&sis->lock);
}
spin_unlock(&swap_lock);
return n;
}
#endif /* CONFIG_HIBERNATION */
static inline int pte_same_as_swp(pte_t pte, pte_t swp_pte)
{
return pte_same(pte_swp_clear_flags(pte), swp_pte);
}
/*
* No need to decide whether this PTE shares the swap entry with others,
* just let do_wp_page work it out if a write is requested later - to
* force COW, vm_page_prot omits write permission from any private vma.
*/
static int unuse_pte(struct vm_area_struct *vma, pmd_t *pmd,
unsigned long addr, swp_entry_t entry, struct folio *folio)
{
struct page *page;
struct folio *swapcache;
spinlock_t *ptl;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t *pte, new_pte, old_pte;
bool hwpoisoned = false;
int ret = 1;
swapcache = folio;
folio = ksm_might_need_to_copy(folio, vma, addr);
if (unlikely(!folio))
return -ENOMEM;
else if (unlikely(folio == ERR_PTR(-EHWPOISON))) {
hwpoisoned = true;
folio = swapcache;
}
page = folio_file_page(folio, swp_offset(entry));
if (PageHWPoison(page))
hwpoisoned = true;
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (unlikely(!pte || !pte_same_as_swp(ptep_get(pte),
swp_entry_to_pte(entry)))) {
ret = 0;
goto out;
}
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
old_pte = ptep_get(pte);
if (unlikely(hwpoisoned || !folio_test_uptodate(folio))) {
swp_entry_t swp_entry;
mm/swapfile: unuse_pte can map random data if swap read fails Patch series "A few fixup patches for mm", v4. This series contains a few patches to avoid mapping random data if swap read fails and fix lost swap bits in unuse_pte. Also we free hwpoison and swapin error entry in madvise_free_pte_range and so on. More details can be found in the respective changelogs. This patch (of 5): There is a bug in unuse_pte(): when swap page happens to be unreadable, page filled with random data is mapped into user address space. In case of error, a special swap entry indicating swap read fails is set to the page table. So the swapcache page can be freed and the user won't end up with a permanently mounted swap because a sector is bad. And if the page is accessed later, the user process will be killed so that corrupted data is never consumed. On the other hand, if the page is never accessed, the user won't even notice it. Link: https://lkml.kernel.org/r/20220519125030.21486-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220519125030.21486-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 12:50:26 +00:00
dec_mm_counter(vma->vm_mm, MM_SWAPENTS);
if (hwpoisoned) {
swp_entry = make_hwpoison_entry(page);
} else {
mm: make PTE_MARKER_SWAPIN_ERROR more general Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD", v4. This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4 for a detailed description of the feature. This patch (of 8): Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement UFFDIO_POISON, so make some various preparations for that: First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be confusing since we're going to re-use it for something not really related to swap. This can be particularly confusing for things like hugetlbfs, which doesn't support swap whatsoever. Also rename some various helper functions. Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap. But, since we're going to re-use it, we want it to go ahead and copy it just like non-hugetlbfs memory does today. Since the code to do this is more complicated now, pull it out into a helper which can be re-used in both places. While we're at it, also make it slightly more explicit in its handling of e.g. uffd wp markers. For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't matter, e.g. a userspace program would receive a SIGBUS either way. But for UFFDIO_POISON, this change will let KVM guests get an MCE out of the box, instead of giving a SIGBUS to the hypervisor and requiring it to somehow inject an MCE. Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today because the lack of swap support means we'll never end up with such a PTE anyway, but this behavior will be needed once such entries *can* show up via UFFDIO_POISON. Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: T.J. Alumbaugh <talumbau@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-07 21:55:33 +00:00
swp_entry = make_poisoned_swp_entry();
}
new_pte = swp_entry_to_pte(swp_entry);
mm/swapfile: unuse_pte can map random data if swap read fails Patch series "A few fixup patches for mm", v4. This series contains a few patches to avoid mapping random data if swap read fails and fix lost swap bits in unuse_pte. Also we free hwpoison and swapin error entry in madvise_free_pte_range and so on. More details can be found in the respective changelogs. This patch (of 5): There is a bug in unuse_pte(): when swap page happens to be unreadable, page filled with random data is mapped into user address space. In case of error, a special swap entry indicating swap read fails is set to the page table. So the swapcache page can be freed and the user won't end up with a permanently mounted swap because a sector is bad. And if the page is accessed later, the user process will be killed so that corrupted data is never consumed. On the other hand, if the page is never accessed, the user won't even notice it. Link: https://lkml.kernel.org/r/20220519125030.21486-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220519125030.21486-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 12:50:26 +00:00
ret = 0;
goto setpte;
mm/swapfile: unuse_pte can map random data if swap read fails Patch series "A few fixup patches for mm", v4. This series contains a few patches to avoid mapping random data if swap read fails and fix lost swap bits in unuse_pte. Also we free hwpoison and swapin error entry in madvise_free_pte_range and so on. More details can be found in the respective changelogs. This patch (of 5): There is a bug in unuse_pte(): when swap page happens to be unreadable, page filled with random data is mapped into user address space. In case of error, a special swap entry indicating swap read fails is set to the page table. So the swapcache page can be freed and the user won't end up with a permanently mounted swap because a sector is bad. And if the page is accessed later, the user process will be killed so that corrupted data is never consumed. On the other hand, if the page is never accessed, the user won't even notice it. Link: https://lkml.kernel.org/r/20220519125030.21486-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220519125030.21486-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 12:50:26 +00:00
}
/*
* Some architectures may have to restore extra metadata to the page
* when reading from swap. This metadata may be indexed by swap entry
* so this must be called before swap_free().
*/
arm64: mm: swap: support THP_SWAP on hardware with MTE Commit d0637c505f8a1 ("arm64: enable THP_SWAP for arm64") brings up THP_SWAP on ARM64, but it doesn't enable THP_SWP on hardware with MTE as the MTE code works with the assumption tags save/restore is always handling a folio with only one page. The limitation should be removed as more and more ARM64 SoCs have this feature. Co-existence of MTE and THP_SWAP becomes more and more important. This patch makes MTE tags saving support large folios, then we don't need to split large folios into base pages for swapping out on ARM64 SoCs with MTE any more. arch_prepare_to_swap() should take folio rather than page as parameter because we support THP swap-out as a whole. It saves tags for all pages in a large folio. As now we are restoring tags based-on folio, in arch_swap_restore(), we may increase some extra loops and early-exitings while refaulting a large folio which is still in swapcache in do_swap_page(). In case a large folio has nr pages, do_swap_page() will only set the PTE of the particular page which is causing the page fault. Thus do_swap_page() runs nr times, and each time, arch_swap_restore() will loop nr times for those subpages in the folio. So right now the algorithmic complexity becomes O(nr^2). Once we support mapping large folios in do_swap_page(), extra loops and early-exitings will decrease while not being completely removed as a large folio might get partially tagged in corner cases such as, 1. a large folio in swapcache can be partially unmapped, thus, MTE tags for the unmapped pages will be invalidated; 2. users might use mprotect() to set MTEs on a part of a large folio. arch_thp_swp_supported() is dropped since ARM64 MTE was the only one who needed it. Link: https://lkml.kernel.org/r/20240322114136.61386-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-22 11:41:36 +00:00
arch_swap_restore(folio_swap(entry, folio), folio);
dec_mm_counter(vma->vm_mm, MM_SWAPENTS);
inc_mm_counter(vma->vm_mm, MM_ANONPAGES);
folio_get(folio);
if (folio == swapcache) {
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
rmap_t rmap_flags = RMAP_NONE;
/*
* See do_swap_page(): writeback would be problematic.
* However, we do a folio_wait_writeback() just before this
* call and have the folio locked.
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
*/
VM_BUG_ON_FOLIO(folio_test_writeback(folio), folio);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_exclusive(old_pte))
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
rmap_flags |= RMAP_EXCLUSIVE;
mm: use folio_add_new_anon_rmap() if folio_test_anon(folio)==false For the !folio_test_anon(folio) case, we can now invoke folio_add_new_anon_rmap() with the rmap flags set to either EXCLUSIVE or non-EXCLUSIVE. This action will suppress the VM_WARN_ON_FOLIO check within __folio_add_anon_rmap() while initiating the process of bringing up mTHP swapin. static __always_inline void __folio_add_anon_rmap(struct folio *folio, struct page *page, int nr_pages, struct vm_area_struct *vma, unsigned long address, rmap_t flags, enum rmap_level level) { ... if (unlikely(!folio_test_anon(folio))) { VM_WARN_ON_FOLIO(folio_test_large(folio) && level != RMAP_LEVEL_PMD, folio); } ... } It also improves the code's readability. Currently, all new anonymous folios calling folio_add_anon_rmap_ptes() are order-0. This ensures that new folios cannot be partially exclusive; they are either entirely exclusive or entirely shared. A useful comment from Hugh's fix: : Commit "mm: use folio_add_new_anon_rmap() if folio_test_anon(folio)== : false" has extended folio_add_new_anon_rmap() to use on non-exclusive : folios, already visible to others in swap cache and on LRU. : : That renders its non-atomic __folio_set_swapbacked() unsafe: it risks : overwriting concurrent atomic operations on folio->flags, losing bits : added or restoring bits cleared. Since it's only used in this risky way : when folio_test_locked and !folio_test_anon, many such races are excluded; : but, for example, isolations by folio_test_clear_lru() are vulnerable, and : setting or clearing active. : : It could just use the atomic folio_set_swapbacked(); but this function : does try to avoid atomics where it can, so use a branch instead: just : avoid setting swapbacked when it is already set, that is good enough. : (Swapbacked is normally stable once set: lazyfree can undo it, but only : later, when found anon in a page table.) : : This fixes a lot of instability under compaction and swapping loads: : assorted "Bad page"s, VM_BUG_ON_FOLIO()s, apparently even page double : frees - though I've not worked out what races could lead to the latter. [akpm@linux-foundation.org: comment fixes, per David and akpm] [v-songbaohua@oppo.com: lock the folio to avoid race] Link: https://lkml.kernel.org/r/20240622032002.53033-1-21cnbao@gmail.com [hughd@google.com: folio_add_new_anon_rmap() careful __folio_set_swapbacked()] Link: https://lkml.kernel.org/r/f3599b1d-8323-0dc5-e9e0-fdb3cfc3dd5a@google.com Link: https://lkml.kernel.org/r/20240617231137.80726-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: Shuai Yuan <yuanshuai@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-17 23:11:36 +00:00
/*
* We currently only expect small !anon folios, which are either
* fully exclusive or fully shared. If we ever get large folios
* here, we have to be careful.
*/
if (!folio_test_anon(folio)) {
VM_WARN_ON_ONCE(folio_test_large(folio));
VM_WARN_ON_FOLIO(!folio_test_locked(folio), folio);
folio_add_new_anon_rmap(folio, vma, addr, rmap_flags);
} else {
folio_add_anon_rmap_pte(folio, page, vma, addr, rmap_flags);
}
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:19:20 +00:00
} else { /* ksm created a completely new copy */
mm: extend rmap flags arguments for folio_add_new_anon_rmap Patch series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()", v2. This patchset is preparatory work for mTHP swapin. folio_add_new_anon_rmap() assumes that new anon rmaps are always exclusive. However, this assumption doesn’t hold true for cases like do_swap_page(), where a new anon might be added to the swapcache and is not necessarily exclusive. The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to handle both exclusive and non-exclusive new anon folios. The do_swap_page() function is updated to use this extended API with rmap flags. Consequently, all new anon folios now consistently use folio_add_new_anon_rmap(). The special case for !folio_test_anon() in __folio_add_anon_rmap() can be safely removed. In conclusion, new anon folios always use folio_add_new_anon_rmap(), regardless of exclusivity. Old anon folios continue to use __folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and folio_add_anon_rmap_ptes(). This patch (of 3): In the case of a swap-in, a new anonymous folio is not necessarily exclusive. This patch updates the rmap flags to allow a new anonymous folio to be treated as either exclusive or non-exclusive. To maintain the existing behavior, we always use EXCLUSIVE as the default setting. [akpm@linux-foundation.org: cleanup and constifications per David and akpm] [v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()] Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com [v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap] Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: David Hildenbrand <david@redhat.com> Tested-by: Shuai Yuan <yuanshuai@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-17 23:11:35 +00:00
folio_add_new_anon_rmap(folio, vma, addr, RMAP_EXCLUSIVE);
folio_add_lru_vma(folio, vma);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:19:20 +00:00
}
new_pte = pte_mkold(mk_pte(page, vma->vm_page_prot));
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_soft_dirty(old_pte))
new_pte = pte_mksoft_dirty(new_pte);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_uffd_wp(old_pte))
new_pte = pte_mkuffd_wp(new_pte);
setpte:
set_pte_at(vma->vm_mm, addr, pte, new_pte);
swap_free(entry);
out:
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
if (pte)
pte_unmap_unlock(pte, ptl);
if (folio != swapcache) {
folio_unlock(folio);
folio_put(folio);
}
return ret;
}
static int unuse_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
unsigned long addr, unsigned long end,
unsigned int type)
{
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
pte_t *pte = NULL;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
struct swap_info_struct *si;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
si = swap_info[type];
do {
struct folio *folio;
unsigned long offset;
unsigned char swp_count;
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
swp_entry_t entry;
int ret;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t ptent;
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
if (!pte++) {
pte = pte_offset_map(pmd, addr);
if (!pte)
break;
}
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
ptent = ptep_get_lockless(pte);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (!is_swap_pte(ptent))
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
continue;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
entry = pte_to_swp_entry(ptent);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
if (swp_type(entry) != type)
continue;
offset = swp_offset(entry);
pte_unmap(pte);
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
pte = NULL;
folio = swap_cache_get_folio(entry, vma, addr);
if (!folio) {
struct vm_fault vmf = {
.vma = vma,
.address = addr,
userfaultfd: provide unmasked address on page-fault Userfaultfd is supposed to provide the full address (i.e., unmasked) of the faulting access back to userspace. However, that is not the case for quite some time. Even running "userfaultfd_demo" from the userfaultfd man page provides the wrong output (and contradicts the man page). Notice that "UFFD_EVENT_PAGEFAULT event" shows the masked address (7fc5e30b3000) and not the first read address (0x7fc5e30b300f). Address returned by mmap() = 0x7fc5e30b3000 fault_handler_thread(): poll() returns: nready = 1; POLLIN = 1; POLLERR = 0 UFFD_EVENT_PAGEFAULT event: flags = 0; address = 7fc5e30b3000 (uffdio_copy.copy returned 4096) Read address 0x7fc5e30b300f in main(): A Read address 0x7fc5e30b340f in main(): A Read address 0x7fc5e30b380f in main(): A Read address 0x7fc5e30b3c0f in main(): A The exact address is useful for various reasons and specifically for prefetching decisions. If it is known that the memory is populated by certain objects whose size is not page-aligned, then based on the faulting address, the uffd-monitor can decide whether to prefetch and prefault the adjacent page. This bug has been for quite some time in the kernel: since commit 1a29d85eb0f1 ("mm: use vmf->address instead of of vmf->virtual_address") vmf->virtual_address"), which dates back to 2016. A concern has been raised that existing userspace application might rely on the old/wrong behavior in which the address is masked. Therefore, it was suggested to provide the masked address unless the user explicitly asks for the exact address. Add a new userfaultfd feature UFFD_FEATURE_EXACT_ADDRESS to direct userfaultfd to provide the exact address. Add a new "real_address" field to vmf to hold the unmasked address. Provide the address to userspace accordingly. Initialize real_address in various code-paths to be consistent with address, even when it is not used, to be on the safe side. [namit@vmware.com: initialize real_address on all code paths, per Jan] Link: https://lkml.kernel.org/r/20220226022655.350562-1-namit@vmware.com [akpm@linux-foundation.org: fix typo in comment, per Jan] Link: https://lkml.kernel.org/r/20220218041003.3508-1-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:45:32 +00:00
.real_address = addr,
.pmd = pmd,
};
folio = swapin_readahead(entry, GFP_HIGHUSER_MOVABLE,
mm: swap: properly update readahead statistics in unuse_pte_range() In unuse_pte_range() we blindly swap-in pages without checking if the swap entry is already present in the swap cache. By doing this, the hit/miss ratio used by the swap readahead heuristic is not properly updated and this leads to non-optimal performance during swapoff. Tracing the distribution of the readahead size returned by the swap readahead heuristic during swapoff shows that a small readahead size is used most of the time as if we had only misses (this happens both with cluster and vma readahead), for example: r::swapin_nr_pages(unsigned long offset):unsigned long:$retval COUNT EVENT 36948 $retval = 8 44151 $retval = 4 49290 $retval = 1 527771 $retval = 2 Checking if the swap entry is present in the swap cache, instead, allows to properly update the readahead statistics and the heuristic behaves in a better way during swapoff, selecting a bigger readahead size: r::swapin_nr_pages(unsigned long offset):unsigned long:$retval COUNT EVENT 1618 $retval = 1 4960 $retval = 2 41315 $retval = 4 103521 $retval = 8 In terms of swapoff performance the result is the following: Testing environment =================== - Host: CPU: 1.8GHz Intel Core i7-8565U (quad-core, 8MB cache) HDD: PC401 NVMe SK hynix 512GB MEM: 16GB - Guest (kvm): 8GB of RAM virtio block driver 16GB swap file on ext4 (/swapfile) Test case ========= - allocate 85% of memory - `systemctl hibernate` to force all the pages to be swapped-out to the swap file - resume the system - measure the time that swapoff takes to complete: # /usr/bin/time swapoff /swapfile Result (swapoff time) ====== 5.6 vanilla 5.6 w/ this patch ----------- ----------------- cluster-readahead 22.09s 12.19s vma-readahead 18.20s 15.33s Conclusion ========== The specific use case this patch is addressing is to improve swapoff performance in cloud environments when a VM has been hibernated, resumed and all the memory needs to be forced back to RAM by disabling swap. This change allows to better exploits the advantages of the readahead heuristic during swapoff and this improvement allows to to speed up the resume process of such VMs. [andrea.righi@canonical.com: update changelog] Link: http://lkml.kernel.org/r/20200418084705.GA147642@xps-13 Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Anchal Agarwal <anchalag@amazon.com> Cc: Hugh Dickins <hughd@google.com> Cc: Vineeth Remanan Pillai <vpillai@digitalocean.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Link: http://lkml.kernel.org/r/20200416180132.GB3352@xps-13 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:48:43 +00:00
&vmf);
}
if (!folio) {
swp_count = READ_ONCE(si->swap_map[offset]);
if (swp_count == 0 || swp_count == SWAP_MAP_BAD)
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
continue;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
return -ENOMEM;
}
folio_lock(folio);
folio_wait_writeback(folio);
ret = unuse_pte(vma, pmd, addr, entry, folio);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
if (ret < 0) {
folio_unlock(folio);
folio_put(folio);
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
return ret;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
}
folio_free_swap(folio);
folio_unlock(folio);
folio_put(folio);
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
} while (addr += PAGE_SIZE, addr != end);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
mm/swapoff: allow pte_offset_map[_lock]() to fail Adjust unuse_pte() and unuse_pte_range() to allow pte_offset_map_lock() and pte_offset_map() failure; remove pmd_none_or_trans_huge_or_clear_bad() from unuse_pmd_range() now that pte_offset_map() does all that itself. Link: https://lkml.kernel.org/r/c4d831-13c3-9dfd-70c2-64514ad951fd@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:36:11 +00:00
if (pte)
pte_unmap(pte);
return 0;
}
static inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,
unsigned long addr, unsigned long end,
unsigned int type)
{
pmd_t *pmd;
unsigned long next;
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
int ret;
pmd = pmd_offset(pud, addr);
do {
cond_resched();
next = pmd_addr_end(addr, end);
ret = unuse_pte_range(vma, pmd, addr, next, type);
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
if (ret)
return ret;
} while (pmd++, addr = next, addr != end);
return 0;
}
static inline int unuse_pud_range(struct vm_area_struct *vma, p4d_t *p4d,
unsigned long addr, unsigned long end,
unsigned int type)
{
pud_t *pud;
unsigned long next;
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
int ret;
pud = pud_offset(p4d, addr);
do {
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud))
continue;
ret = unuse_pmd_range(vma, pud, addr, next, type);
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
if (ret)
return ret;
} while (pud++, addr = next, addr != end);
return 0;
}
static inline int unuse_p4d_range(struct vm_area_struct *vma, pgd_t *pgd,
unsigned long addr, unsigned long end,
unsigned int type)
{
p4d_t *p4d;
unsigned long next;
int ret;
p4d = p4d_offset(pgd, addr);
do {
next = p4d_addr_end(addr, end);
if (p4d_none_or_clear_bad(p4d))
continue;
ret = unuse_pud_range(vma, p4d, addr, next, type);
if (ret)
return ret;
} while (p4d++, addr = next, addr != end);
return 0;
}
static int unuse_vma(struct vm_area_struct *vma, unsigned int type)
{
pgd_t *pgd;
unsigned long addr, end, next;
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
int ret;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
addr = vma->vm_start;
end = vma->vm_end;
pgd = pgd_offset(vma->vm_mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
ret = unuse_p4d_range(vma, pgd, addr, next, type);
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
if (ret)
return ret;
} while (pgd++, addr = next, addr != end);
return 0;
}
static int unuse_mm(struct mm_struct *mm, unsigned int type)
{
struct vm_area_struct *vma;
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
int ret = 0;
VMA_ITERATOR(vmi, mm, 0);
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_lock(mm);
for_each_vma(vmi, vma) {
if (vma->anon_vma && !is_vm_hugetlb_page(vma)) {
ret = unuse_vma(vma, type);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
if (ret)
break;
}
cond_resched();
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_unlock(mm);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
return ret;
}
/*
* Scan swap_map from current position to next entry still in use.
* Return 0 if there are no inuse entries after prev till end of
* the map.
*/
static unsigned int find_next_to_unuse(struct swap_info_struct *si,
unsigned int prev)
{
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
unsigned int i;
unsigned char count;
/*
* No need for swap_lock here: we're just looking
* for whether an entry is in use, not modifying it; false
* hits are okay, and sys_swapoff() has already prevented new
* allocations from this area (while holding swap_lock).
*/
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
for (i = prev + 1; i < si->max; i++) {
count = READ_ONCE(si->swap_map[i]);
if (count && swap_count(count) != SWAP_MAP_BAD)
break;
if ((i % LATENCY_LIMIT) == 0)
cond_resched();
}
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
if (i == si->max)
i = 0;
return i;
}
static int try_to_unuse(unsigned int type)
{
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
struct mm_struct *prev_mm;
struct mm_struct *mm;
struct list_head *p;
int retval = 0;
struct swap_info_struct *si = swap_info[type];
struct folio *folio;
swp_entry_t entry;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
unsigned int i;
if (!READ_ONCE(si->inuse_pages))
mm: swap: enforce updating inuse_pages at the end of swap_range_free() Patch series "mm: zswap: simplify zswap_swapoff()", v2. These patches aim to simplify zswap_swapoff() by removing the unnecessary trees cleanup code. Patch 1 makes sure that the order of operations during swapoff is enforced correctly, making sure the simplification in patch 2 is correct in a future-proof manner. This patch (of 2): In swap_range_free(), we update inuse_pages then do some cleanups (arch invalidation, zswap invalidation, swap cache cleanups, etc). During swapoff, try_to_unuse() checks that inuse_pages is 0 to make sure all swap entries are freed. Make sure we only update inuse_pages after we are done with the cleanups in swap_range_free(), and use the proper memory barriers to enforce it. This makes sure that code following try_to_unuse() can safely assume that swap_range_free() ran for all entries in thr swapfile (e.g. swap cache cleanup, zswap_swapoff()). In practice, this currently isn't a problem because swap_range_free() is called with the swap info lock held, and the swapoff code happens to spin for that after try_to_unuse(). However, this seems fragile and unintentional, so make it more relable and future-proof. This also facilitates a following simplification of zswap_swapoff(). Link: https://lkml.kernel.org/r/20240124045113.415378-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20240124045113.415378-2-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: Chris Li <chrisl@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-24 04:51:11 +00:00
goto success;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
retry:
retval = shmem_unuse(type);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
if (retval)
return retval;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
prev_mm = &init_mm;
mmget(prev_mm);
spin_lock(&mmlist_lock);
p = &init_mm.mmlist;
while (READ_ONCE(si->inuse_pages) &&
!signal_pending(current) &&
(p = p->next) != &init_mm.mmlist) {
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
mm = list_entry(p, struct mm_struct, mmlist);
if (!mmget_not_zero(mm))
continue;
spin_unlock(&mmlist_lock);
mmput(prev_mm);
prev_mm = mm;
retval = unuse_mm(mm, type);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
if (retval) {
mmput(prev_mm);
return retval;
}
/*
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
* Make sure that we aren't completely killing
* interactive performance.
*/
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
cond_resched();
spin_lock(&mmlist_lock);
}
spin_unlock(&mmlist_lock);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
mmput(prev_mm);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
i = 0;
while (READ_ONCE(si->inuse_pages) &&
!signal_pending(current) &&
(i = find_next_to_unuse(si, i)) != 0) {
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
entry = swp_entry(type, i);
mm/swap: reduce swap cache search space Currently we use one swap_address_space for every 64M chunk to reduce lock contention, this is like having a set of smaller swap files inside one swap device. But when doing swap cache look up or insert, we are still using the offset of the whole large swap device. This is OK for correctness, as the offset (key) is unique. But Xarray is specially optimized for small indexes, it creates the radix tree levels lazily to be just enough to fit the largest key stored in one Xarray. So we are wasting tree nodes unnecessarily. For 64M chunk it should only take at most 3 levels to contain everything. But if we are using the offset from the whole swap device, the offset (key) value will be way beyond 64M, and so will the tree level. Optimize this by using a new helper swap_cache_index to get a swap entry's unique offset in its own 64M swap_address_space. I see a ~1% performance gain in benchmark and actual workload with high memory pressure. Test with `time memhog 128G` inside a 8G memcg using 128G swap (ramdisk with SWP_SYNCHRONOUS_IO dropped, tested 3 times, results are stable. The test result is similar but the improvement is smaller if SWP_SYNCHRONOUS_IO is enabled, as swap out path can never skip swap cache): Before: 6.07user 250.74system 4:17.26elapsed 99%CPU (0avgtext+0avgdata 8373376maxresident)k 0inputs+0outputs (55major+33555018minor)pagefaults 0swaps After (1.8% faster): 6.08user 246.09system 4:12.58elapsed 99%CPU (0avgtext+0avgdata 8373248maxresident)k 0inputs+0outputs (54major+33555027minor)pagefaults 0swaps Similar result with MySQL and sysbench using swap: Before: 94055.61 qps After (0.8% faster): 94834.91 qps Radix tree slab usage is also very slightly lower. Link: https://lkml.kernel.org/r/20240521175854.96038-12-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-21 17:58:53 +00:00
folio = filemap_get_folio(swap_address_space(entry), swap_cache_index(entry));
if (IS_ERR(folio))
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
continue;
mm: try_to_unuse check removing right swap There's a possible race in try_to_unuse() which Nick Piggin led me to two years ago. Where it does lock_page() after read_swap_cache_async(), what if another task removed that page from swapcache just before we locked it? It would sail though the (*swap_map > 1) tests doing nothing (because it could not have been removed from swapcache before its swap references were gone), until it reaches the delete_from_swap_cache(page) near the bottom. Now imagine that this page has been allocated to swap on a different swap area while we dropped page lock (perhaps at the top, perhaps in unuse_mm): we could wrongly remove from swap cache before the page has been written to swap, so a subsequent do_swap_page() would read in stale data from swap. I think this case could not happen before: remove_exclusive_swap_page() refused while page count was raised. But now with reuse_swap_page() and try_to_free_swap() removing from swap cache without minding page count, I think it could happen - the previous patch argued that it was safe because try_to_unuse() already ignored page count, but overlooked that it might be breaking the assumptions in try_to_unuse() itself. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 22:39:37 +00:00
/*
* It is conceivable that a racing task removed this folio from
* swap cache just before we acquired the page lock. The folio
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
* might even be back in swap cache on another swap area. But
* that is okay, folio_free_swap() only removes stale folios.
*/
folio_lock(folio);
folio_wait_writeback(folio);
folio_free_swap(folio);
folio_unlock(folio);
folio_put(folio);
}
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
/*
* Lets check again to see if there are still swap entries in the map.
* If yes, we would need to do retry the unuse logic again.
* Under global memory pressure, swap entries can be reinserted back
* into process space after the mmlist loop above passes over them.
*
* Limit the number of retries? No: when mmget_not_zero()
* above fails, that mm is likely to be freeing swap from
* exit_mmap(), which proceeds at its own independent pace;
* and even shmem_writepage() could have been preempted after
* folio_alloc_swap(), temporarily hiding that swap. It's easy
* and robust (though cpu-intensive) just to keep retrying.
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:47:03 +00:00
*/
if (READ_ONCE(si->inuse_pages)) {
if (!signal_pending(current))
goto retry;
return -EINTR;
}
mm: swap: enforce updating inuse_pages at the end of swap_range_free() Patch series "mm: zswap: simplify zswap_swapoff()", v2. These patches aim to simplify zswap_swapoff() by removing the unnecessary trees cleanup code. Patch 1 makes sure that the order of operations during swapoff is enforced correctly, making sure the simplification in patch 2 is correct in a future-proof manner. This patch (of 2): In swap_range_free(), we update inuse_pages then do some cleanups (arch invalidation, zswap invalidation, swap cache cleanups, etc). During swapoff, try_to_unuse() checks that inuse_pages is 0 to make sure all swap entries are freed. Make sure we only update inuse_pages after we are done with the cleanups in swap_range_free(), and use the proper memory barriers to enforce it. This makes sure that code following try_to_unuse() can safely assume that swap_range_free() ran for all entries in thr swapfile (e.g. swap cache cleanup, zswap_swapoff()). In practice, this currently isn't a problem because swap_range_free() is called with the swap info lock held, and the swapoff code happens to spin for that after try_to_unuse(). However, this seems fragile and unintentional, so make it more relable and future-proof. This also facilitates a following simplification of zswap_swapoff(). Link: https://lkml.kernel.org/r/20240124045113.415378-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20240124045113.415378-2-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: Chris Li <chrisl@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-24 04:51:11 +00:00
success:
/*
* Make sure that further cleanups after try_to_unuse() returns happen
* after swap_range_free() reduces si->inuse_pages to 0.
*/
smp_mb();
return 0;
}
/*
* After a successful try_to_unuse, if no swap is now in use, we know
* we can empty the mmlist. swap_lock must be held on entry and exit.
* Note that mmlist_lock nests inside swap_lock, and an mm must be
* added to the mmlist just after page_duplicate - before would be racy.
*/
static void drain_mmlist(void)
{
struct list_head *p, *next;
unsigned int type;
for (type = 0; type < nr_swapfiles; type++)
if (swap_info[type]->inuse_pages)
return;
spin_lock(&mmlist_lock);
list_for_each_safe(p, next, &init_mm.mmlist)
list_del_init(p);
spin_unlock(&mmlist_lock);
}
/*
* Free all of a swapdev's extent information
*/
static void destroy_swap_extents(struct swap_info_struct *sis)
{
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
while (!RB_EMPTY_ROOT(&sis->swap_extent_root)) {
struct rb_node *rb = sis->swap_extent_root.rb_node;
struct swap_extent *se = rb_entry(rb, struct swap_extent, rb_node);
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
rb_erase(rb, &sis->swap_extent_root);
kfree(se);
}
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:55 +00:00
if (sis->flags & SWP_ACTIVATED) {
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:55 +00:00
struct file *swap_file = sis->swap_file;
struct address_space *mapping = swap_file->f_mapping;
sis->flags &= ~SWP_ACTIVATED;
if (mapping->a_ops->swap_deactivate)
mapping->a_ops->swap_deactivate(swap_file);
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:55 +00:00
}
}
/*
* Add a block range (and the corresponding page range) into this swapdev's
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
* extent tree.
*
* This function rather assumes that it is called in ascending page order.
*/
int
add_swap_extent(struct swap_info_struct *sis, unsigned long start_page,
unsigned long nr_pages, sector_t start_block)
{
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
struct rb_node **link = &sis->swap_extent_root.rb_node, *parent = NULL;
struct swap_extent *se;
struct swap_extent *new_se;
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
/*
* place the new node at the right most since the
* function is called in ascending page order.
*/
while (*link) {
parent = *link;
link = &parent->rb_right;
}
if (parent) {
se = rb_entry(parent, struct swap_extent, rb_node);
BUG_ON(se->start_page + se->nr_pages != start_page);
if (se->start_block + se->nr_pages == start_block) {
/* Merge it */
se->nr_pages += nr_pages;
return 0;
}
}
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
/* No merge, insert a new extent. */
new_se = kmalloc(sizeof(*se), GFP_KERNEL);
if (new_se == NULL)
return -ENOMEM;
new_se->start_page = start_page;
new_se->nr_pages = nr_pages;
new_se->start_block = start_block;
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
rb_link_node(&new_se->rb_node, parent, link);
rb_insert_color(&new_se->rb_node, &sis->swap_extent_root);
return 1;
}
EXPORT_SYMBOL_GPL(add_swap_extent);
/*
* A `swap extent' is a simple thing which maps a contiguous range of pages
* onto a contiguous range of disk blocks. A rbtree of swap extents is
* built at swapon time and is then used at swap_writepage/swap_read_folio
* time for locating where on disk a page belongs.
*
* If the swapfile is an S_ISBLK block device, a single extent is installed.
* This is done so that the main operating code can treat S_ISBLK and S_ISREG
* swap files identically.
*
* Whether the swapdev is an S_ISREG file or an S_ISBLK blockdev, the swap
* extent rbtree operates in PAGE_SIZE disk blocks. Both S_ISREG and S_ISBLK
* swapfiles are handled *identically* after swapon time.
*
* For S_ISREG swapfiles, setup_swap_extents() will walk all the file's blocks
* and will parse them into a rbtree, in PAGE_SIZE chunks. If some stray
* blocks are found which do not fall within the PAGE_SIZE alignment
* requirements, they are simply tossed out - we will never use those blocks
* for swapping.
*
* For all swap devices we set S_SWAPFILE across the life of the swapon. This
* prevents users from writing to the swap device, which will corrupt memory.
*
* The amount of disk space which a single swap extent represents varies.
* Typically it is in the 1-4 megabyte range. So we can have hundreds of
* extents in the rbtree. - akpm.
*/
static int setup_swap_extents(struct swap_info_struct *sis, sector_t *span)
{
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:55 +00:00
struct file *swap_file = sis->swap_file;
struct address_space *mapping = swap_file->f_mapping;
struct inode *inode = mapping->host;
int ret;
if (S_ISBLK(inode->i_mode)) {
ret = add_swap_extent(sis, 0, sis->max, 0);
*span = sis->pages;
return ret;
}
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:55 +00:00
if (mapping->a_ops->swap_activate) {
ret = mapping->a_ops->swap_activate(sis, swap_file, span);
if (ret < 0)
return ret;
sis->flags |= SWP_ACTIVATED;
mm: introduce ->swap_rw and use it for reads from SWP_FS_OPS swap-space swap currently uses ->readpage to read swap pages. This can only request one page at a time from the filesystem, which is not most efficient. swap uses ->direct_IO for writes which while this is adequate is an inappropriate over-loading. ->direct_IO may need to had handle allocate space for holes or other details that are not relevant for swap. So this patch introduces a new address_space operation: ->swap_rw. In this patch it is used for reads, and a subsequent patch will switch writes to use it. No filesystem yet supports ->swap_rw, but that is not a problem because no filesystem actually works with filesystem-based swap. Only two filesystems set SWP_FS_OPS: - cifs sets the flag, but ->direct_IO always fails so swap cannot work. - nfs sets the flag, but ->direct_IO calls generic_write_checks() which has failed on swap files for several releases. To ensure that a NULL ->swap_rw isn't called, ->activate_swap() for both NFS and cifs are changed to fail if ->swap_rw is not set. This can be removed if/when the function is added. Future patches will restore swap-over-NFS functionality. To submit an async read with ->swap_rw() we need to allocate a structure to hold the kiocb and other details. swap_readpage() cannot handle transient failure, so we create a mempool to provide the structures. Link: https://lkml.kernel.org/r/164859778125.29473.13430559328221330589.stgit@noble.brown Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:48 +00:00
if ((sis->flags & SWP_FS_OPS) &&
sio_pool_init() != 0) {
destroy_swap_extents(sis);
return -ENOMEM;
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:55 +00:00
}
return ret;
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 23:44:55 +00:00
}
return generic_swapfile_activate(sis, swap_file, span);
}
static int swap_node(struct swap_info_struct *si)
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
{
struct block_device *bdev;
if (si->bdev)
bdev = si->bdev;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
else
bdev = si->swap_file->f_inode->i_sb->s_bdev;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
return bdev ? bdev->bd_disk->node_id : NUMA_NO_NODE;
}
static void setup_swap_info(struct swap_info_struct *si, int prio,
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
unsigned char *swap_map,
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
struct swap_cluster_info *cluster_info,
unsigned long *zeromap)
{
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
int i;
if (prio >= 0)
si->prio = prio;
else
si->prio = --least_priority;
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
/*
* the plist prio is negated because plist ordering is
* low-to-high, while swap ordering is high-to-low
*/
si->list.prio = -si->prio;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
for_each_node(i) {
if (si->prio >= 0)
si->avail_lists[i].prio = -si->prio;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
else {
if (swap_node(si) == i)
si->avail_lists[i].prio = 1;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
else
si->avail_lists[i].prio = -si->prio;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
}
}
si->swap_map = swap_map;
si->cluster_info = cluster_info;
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
si->zeromap = zeromap;
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
}
static void _enable_swap_info(struct swap_info_struct *si)
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
{
si->flags |= SWP_WRITEOK;
atomic_long_add(si->pages, &nr_swap_pages);
total_swap_pages += si->pages;
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
assert_spin_locked(&swap_lock);
/*
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
* both lists are plists, and thus priority ordered.
* swap_active_head needs to be priority ordered for swapoff(),
* which on removal of any swap_info_struct with an auto-assigned
* (i.e. negative) priority increments the auto-assigned priority
* of any lower-priority swap_info_structs.
* swap_avail_head needs to be priority ordered for folio_alloc_swap(),
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
* which allocates swap pages from the highest available priority
* swap_info_struct.
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
*/
plist_add(&si->list, &swap_active_head);
swap: stop add to avail list if swap is full Our test finds a WARN_ON in add_to_avail_list. During add_to_avail_list, avail_lists is already in swap_avail_heads, while leads to this WARN_ON. Here is the simplified calltrace: ------------[ cut here ]------------ Call trace: add_to_avail_list+0xb8/0xc0 swap_range_free+0x110/0x138 swapcache_free_entries+0x100/0x1c0 free_swap_slot+0xbc/0xe0 put_swap_folio+0x1f0/0x2ec delete_from_swap_cache+0x6c/0xd0 folio_free_swap+0xa4/0xe4 __try_to_reclaim_swap+0x9c/0x190 free_swap_and_cache+0x84/0x88 unmap_page_range+0x31c/0x934 unmap_single_vma.isra.0+0x48/0x84 unmap_vmas+0x98/0x10c exit_mmap+0xa4/0x210 mmput+0x88/0x158 do_exit+0x284/0x970 do_group_exit+0x34/0x90 post_copy_siginfo_from_user32+0x0/0x1cc do_notify_resume+0x15c/0x470 el0_svc+0x74/0x84 el0t_64_sync_handler+0xb8/0xbc el0t_64_sync+0x190/0x194 During swapoff, try_to_unuse fails to alloc memory due to memory limit and this leads to the failure of swapoff and causes re-insertion of swap space back into swap_list. During _enable_swap_info, this swap device is added to avail list even this swap device if full. At the same time, one entry in this full swap device in released and we try to add this device into avail list and find it is already in the avail list. This causes this WARN_ON. To fix this. Don't add to avail list is swap is full. [akpm@linux-foundation.org: coding-style cleanups] Link: https://lkml.kernel.org/r/20230627120833.2230766-3-mawupeng1@huawei.com Signed-off-by: Ma Wupeng <mawupeng1@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-27 12:08:33 +00:00
/* add to available list iff swap device is not full */
if (si->highest_bit)
add_to_avail_list(si);
}
static void enable_swap_info(struct swap_info_struct *si, int prio,
unsigned char *swap_map,
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
struct swap_cluster_info *cluster_info,
unsigned long *zeromap)
{
spin_lock(&swap_lock);
spin_lock(&si->lock);
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
setup_swap_info(si, prio, swap_map, cluster_info, zeromap);
spin_unlock(&si->lock);
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
spin_unlock(&swap_lock);
/*
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
* Finished initializing swap device, now it's safe to reference it.
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
*/
percpu_ref_resurrect(&si->users);
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
spin_lock(&swap_lock);
spin_lock(&si->lock);
_enable_swap_info(si);
spin_unlock(&si->lock);
spin_unlock(&swap_lock);
}
static void reinsert_swap_info(struct swap_info_struct *si)
{
spin_lock(&swap_lock);
spin_lock(&si->lock);
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
setup_swap_info(si, si->prio, si->swap_map, si->cluster_info, si->zeromap);
_enable_swap_info(si);
spin_unlock(&si->lock);
spin_unlock(&swap_lock);
}
static bool __has_usable_swap(void)
{
return !plist_head_empty(&swap_active_head);
}
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:39 +00:00
bool has_usable_swap(void)
{
bool ret;
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:39 +00:00
spin_lock(&swap_lock);
ret = __has_usable_swap();
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:39 +00:00
spin_unlock(&swap_lock);
return ret;
}
SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
{
struct swap_info_struct *p = NULL;
unsigned char *swap_map;
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
unsigned long *zeromap;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
struct swap_cluster_info *cluster_info;
struct file *swap_file, *victim;
struct address_space *mapping;
struct inode *inode;
struct filename *pathname;
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
int err, found = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
BUG_ON(!current->mm);
pathname = getname(specialfile);
if (IS_ERR(pathname))
return PTR_ERR(pathname);
victim = file_open_name(pathname, O_RDWR|O_LARGEFILE, 0);
err = PTR_ERR(victim);
if (IS_ERR(victim))
goto out;
mapping = victim->f_mapping;
spin_lock(&swap_lock);
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
plist_for_each_entry(p, &swap_active_head, list) {
if (p->flags & SWP_WRITEOK) {
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
if (p->swap_file->f_mapping == mapping) {
found = 1;
break;
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
}
}
}
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
if (!found) {
err = -EINVAL;
spin_unlock(&swap_lock);
goto out_dput;
}
if (!security_vm_enough_memory_mm(current->mm, p->pages))
vm_unacct_memory(p->pages);
else {
err = -ENOMEM;
spin_unlock(&swap_lock);
goto out_dput;
}
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&p->lock);
mm/swap: fix swap_info_struct race between swapoff and get_swap_pages() The si->lock must be held when deleting the si from the available list. Otherwise, another thread can re-add the si to the available list, which can lead to memory corruption. The only place we have found where this happens is in the swapoff path. This case can be described as below: core 0 core 1 swapoff del_from_avail_list(si) waiting try lock si->lock acquire swap_avail_lock and re-add si into swap_avail_head acquire si->lock but missing si already being added again, and continuing to clear SWP_WRITEOK, etc. It can be easily found that a massive warning messages can be triggered inside get_swap_pages() by some special cases, for example, we call madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile, run much swapon-swapoff operations (e.g. stress-ng-swap). However, in the worst case, panic can be caused by the above scene. In swapoff(), the memory used by si could be kept in swap_info[] after turning off a swap. This means memory corruption will not be caused immediately until allocated and reset for a new swap in the swapon path. A panic message caused: (with CONFIG_PLIST_DEBUG enabled) ------------[ cut here ]------------ top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70 Modules linked in: rfkill(E) crct10dif_ce(E)... CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+ Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) pc : plist_check_prev_next_node+0x50/0x70 lr : plist_check_prev_next_node+0x50/0x70 sp : ffff0018009d3c30 x29: ffff0018009d3c40 x28: ffff800011b32a98 x27: 0000000000000000 x26: ffff001803908000 x25: ffff8000128ea088 x24: ffff800011b32a48 x23: 0000000000000028 x22: ffff001800875c00 x21: ffff800010f9e520 x20: ffff001800875c00 x19: ffff001800fdc6e0 x18: 0000000000000030 x17: 0000000000000000 x16: 0000000000000000 x15: 0736076307640766 x14: 0730073007380731 x13: 0736076307640766 x12: 0730073007380731 x11: 000000000004058d x10: 0000000085a85b76 x9 : ffff8000101436e4 x8 : ffff800011c8ce08 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff0017df9ed338 x4 : 0000000000000001 x3 : ffff8017ce62a000 x2 : ffff0017df9ed340 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: plist_check_prev_next_node+0x50/0x70 plist_check_head+0x80/0xf0 plist_add+0x28/0x140 add_to_avail_list+0x9c/0xf0 _enable_swap_info+0x78/0xb4 __do_sys_swapon+0x918/0xa10 __arm64_sys_swapon+0x20/0x30 el0_svc_common+0x8c/0x220 do_el0_svc+0x2c/0x90 el0_svc+0x1c/0x30 el0_sync_handler+0xa8/0xb0 el0_sync+0x148/0x180 irq event stamp: 2082270 Now, si->lock locked before calling 'del_from_avail_list()' to make sure other thread see the si had been deleted and SWP_WRITEOK cleared together, will not reinsert again. This problem exists in versions after stable 5.10.y. Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node") Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com> Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-04 15:47:16 +00:00
del_from_avail_list(p);
if (p->prio < 0) {
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
struct swap_info_struct *si = p;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
int nid;
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
plist_for_each_entry_continue(si, &swap_active_head, list) {
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
si->prio++;
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
si->list.prio--;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
for_each_node(nid) {
if (si->avail_lists[nid].prio != 1)
si->avail_lists[nid].prio--;
}
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
}
least_priority++;
}
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
plist_del(&p->list, &swap_active_head);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
atomic_long_sub(p->pages, &nr_swap_pages);
total_swap_pages -= p->pages;
p->flags &= ~SWP_WRITEOK;
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&p->lock);
spin_unlock(&swap_lock);
disable_swap_slots_cache_lock();
mm, oom: fix race when specifying a thread as the oom origin test_set_oom_score_adj() and compare_swap_oom_score_adj() are used to specify that current should be killed first if an oom condition occurs in between the two calls. The usage is short oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX); ... compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX, oom_score_adj); to store the thread's oom_score_adj, temporarily change it to the maximum score possible, and then restore the old value if it is still the same. This happens to still be racy, however, if the user writes OOM_SCORE_ADJ_MAX to /proc/pid/oom_score_adj in between the two calls. The compare_swap_oom_score_adj() will then incorrectly reset the old value prior to the write of OOM_SCORE_ADJ_MAX. To fix this, introduce a new oom_flags_t member in struct signal_struct that will be used for per-thread oom killer flags. KSM and swapoff can now use a bit in this member to specify that threads should be killed first in oom conditions without playing around with oom_score_adj. This also allows the correct oom_score_adj to always be shown when reading /proc/pid/oom_score. Signed-off-by: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 00:02:56 +00:00
set_current_oom_origin();
err = try_to_unuse(p->type);
mm, oom: fix race when specifying a thread as the oom origin test_set_oom_score_adj() and compare_swap_oom_score_adj() are used to specify that current should be killed first if an oom condition occurs in between the two calls. The usage is short oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX); ... compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX, oom_score_adj); to store the thread's oom_score_adj, temporarily change it to the maximum score possible, and then restore the old value if it is still the same. This happens to still be racy, however, if the user writes OOM_SCORE_ADJ_MAX to /proc/pid/oom_score_adj in between the two calls. The compare_swap_oom_score_adj() will then incorrectly reset the old value prior to the write of OOM_SCORE_ADJ_MAX. To fix this, introduce a new oom_flags_t member in struct signal_struct that will be used for per-thread oom killer flags. KSM and swapoff can now use a bit in this member to specify that threads should be killed first in oom conditions without playing around with oom_score_adj. This also allows the correct oom_score_adj to always be shown when reading /proc/pid/oom_score. Signed-off-by: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 00:02:56 +00:00
clear_current_oom_origin();
if (err) {
/* re-insert swap space back into swap_list */
reinsert_swap_info(p);
reenable_swap_slots_cache_unlock();
goto out_dput;
}
reenable_swap_slots_cache_unlock();
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
/*
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
* Wait for swap operations protected by get/put_swap_device()
* to complete. Because of synchronize_rcu() here, all swap
* operations protected by RCU reader side lock (including any
* spinlock) will be waited too. This makes it easy to
* prevent folio_test_swapcache() and the following swap cache
* operations from racing with swapoff.
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
*/
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
percpu_ref_kill(&p->users);
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
synchronize_rcu();
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
wait_for_completion(&p->comp);
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
flush_work(&p->discard_work);
destroy_swap_extents(p);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
if (p->flags & SWP_CONTINUED)
free_swap_count_continuations(p);
if (!p->bdev || !bdev_nonrot(p->bdev))
atomic_dec(&nr_rotate_swap);
mutex_lock(&swapon_mutex);
spin_lock(&swap_lock);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&p->lock);
drain_mmlist();
/* wait for anyone still in scan_swap_map_slots */
p->highest_bit = 0; /* cuts scans short */
while (p->flags >= SWP_SCANNING) {
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&p->lock);
spin_unlock(&swap_lock);
schedule_timeout_uninterruptible(1);
spin_lock(&swap_lock);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock(&p->lock);
}
swap_file = p->swap_file;
p->swap_file = NULL;
p->max = 0;
swap_map = p->swap_map;
p->swap_map = NULL;
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
zeromap = p->zeromap;
p->zeromap = NULL;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
cluster_info = p->cluster_info;
p->cluster_info = NULL;
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&p->lock);
spin_unlock(&swap_lock);
arch_swap_invalidate_area(p->type);
zswap_swapoff(p->type);
mutex_unlock(&swapon_mutex);
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:32 +00:00
free_percpu(p->percpu_cluster);
p->percpu_cluster = NULL;
swap: reduce lock contention on swap cache from swap slots allocation In some swap scalability test, it is found that there are heavy lock contention on swap cache even if we have split one swap cache radix tree per swap device to one swap cache radix tree every 64 MB trunk in commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"). The reason is as follow. After the swap device becomes fragmented so that there's no free swap cluster, the swap device will be scanned linearly to find the free swap slots. swap_info_struct->cluster_next is the next scanning base that is shared by all CPUs. So nearby free swap slots will be allocated for different CPUs. The probability for multiple CPUs to operate on the same 64 MB trunk is high. This causes the lock contention on the swap cache. To solve the issue, in this patch, for SSD swap device, a percpu version next scanning base (cluster_next_cpu) is added. Every CPU will use its own per-cpu next scanning base. And after finishing scanning a 64MB trunk, the per-cpu scanning base will be changed to the beginning of another randomly selected 64MB trunk. In this way, the probability for multiple CPUs to operate on the same 64 MB trunk is reduced greatly. Thus the lock contention is reduced too. For HDD, because sequential access is more important for IO performance, the original shared next scanning base is used. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. One ram disk is configured as the swap device per socket. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random. In the original implementation, the lock contention on the swap cache is heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock_irq.add_to_swap_cache.add_to_swap.shrink_page_list: 7.91 _raw_spin_lock_irqsave.__remove_mapping.shrink_page_list: 7.11 _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 2.51 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 1.66 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.29 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.03 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 0.93 After applying this patch, it becomes, _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 3.58 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 2.3 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 2.26 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.8 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.19 The lock contention on the swap cache is almost eliminated. And the pmbench score increases 18.5%. The swapin throughput increases 18.7% from 2.96 GB/s to 3.51 GB/s. While the swapout throughput increases 18.5% from 2.99 GB/s to 3.54 GB/s. We need really fast disk to show the benefit. I have tried this on 2 Intel P3600 NVMe disks. The performance improvement is only about 1%. The improvement should be better on the faster disks, such as Intel Optane disk. [ying.huang@intel.com: fix cluster_next_cpu allocation and freeing, per Daniel] Link: http://lkml.kernel.org/r/20200525002648.336325-1-ying.huang@intel.com [ying.huang@intel.com: v4] Link: http://lkml.kernel.org/r/20200529010840.928819-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200520031502.175659-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 04:49:22 +00:00
free_percpu(p->cluster_next_cpu);
p->cluster_next_cpu = NULL;
vfree(swap_map);
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
kvfree(zeromap);
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:57:40 +00:00
kvfree(cluster_info);
/* Destroy swap account information */
swap: change swap_info singly-linked list to list_head The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:53 +00:00
swap_cgroup_swapoff(p->type);
mm/swap: split swap cache into 64MB trunks The patch is to improve the scalability of the swap out/in via using fine grained locks for the swap cache. In current kernel, one address space will be used for each swap device. And in the common configuration, the number of the swap device is very small (one is typical). This causes the heavy lock contention on the radix tree of the address space if multiple tasks swap out/in concurrently. But in fact, there is no dependency between pages in the swap cache. So that, we can split the one shared address space for each swap device into several address spaces to reduce the lock contention. In the patch, the shared address space is split into 64MB trunks. 64MB is chosen to balance the memory space usage and effect of lock contention reduction. The size of struct address_space on x86_64 architecture is 408B, so with the patch, 6528B more memory will be used for every 1GB swap space on x86_64 architecture. One address space is still shared for the swap entries in the same 64M trunks. To avoid lock contention for the first round of swap space allocation, the order of the swap clusters in the initial free clusters list is changed. The swap space distance between the consecutive swap clusters in the free cluster list is at least 64M. After the first round of allocation, the swap clusters are expected to be freed randomly, so the lock contention should be reduced effectively. Link: http://lkml.kernel.org/r/735bab895e64c930581ffb0a05b661e01da82bc5.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:26 +00:00
exit_swap_address_space(p->type);
memcg: swap cgroup for remembering usage For accounting swap, we need a record per swap entry, at least. This patch adds following function. - swap_cgroup_swapon() .... called from swapon - swap_cgroup_swapoff() ... called at the end of swapoff. - swap_cgroup_record() .... record information of swap entry. - swap_cgroup_lookup() .... lookup information of swap entry. This patch just implements "how to record information". No actual method for limit the usage of swap. These routine uses flat table to record and lookup. "wise" lookup system like radix-tree requires requires memory allocation at new records but swap-out is usually called under memory shortage (or memcg hits limit.) So, I used static allocation. (maybe dynamic allocation is not very hard but it adds additional memory allocation in memory shortage path.) Note1: In this, we use pointer to record information and this means 8bytes per swap entry. I think we can reduce this when we create "id of cgroup" in the range of 0-65535 or 0-255. Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reported-by: Hugh Dickins <hugh@veritas.com> Reported-by: Balbir Singh <balbir@linux.vnet.ibm.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 02:07:58 +00:00
inode = mapping->host;
inode_lock(inode);
inode->i_flags &= ~S_SWAPFILE;
inode_unlock(inode);
filp_close(swap_file, NULL);
/*
* Clear the SWP_USED flag after all resources are freed so that swapon
* can reuse this swap_info in alloc_swap_info() safely. It is ok to
* not hold p->lock after we cleared its SWP_WRITEOK.
*/
spin_lock(&swap_lock);
p->flags = 0;
spin_unlock(&swap_lock);
err = 0;
atomic_inc(&proc_poll_event);
wake_up_interruptible(&proc_poll_wait);
out_dput:
filp_close(victim, NULL);
out:
putname(pathname);
return err;
}
#ifdef CONFIG_PROC_FS
static __poll_t swaps_poll(struct file *file, poll_table *wait)
{
struct seq_file *seq = file->private_data;
poll_wait(file, &proc_poll_wait, wait);
if (seq->poll_event != atomic_read(&proc_poll_event)) {
seq->poll_event = atomic_read(&proc_poll_event);
return EPOLLIN | EPOLLRDNORM | EPOLLERR | EPOLLPRI;
}
return EPOLLIN | EPOLLRDNORM;
}
/* iterator */
static void *swap_start(struct seq_file *swap, loff_t *pos)
{
struct swap_info_struct *si;
int type;
loff_t l = *pos;
mutex_lock(&swapon_mutex);
if (!l)
return SEQ_START_TOKEN;
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
for (type = 0; (si = swap_type_to_swap_info(type)); type++) {
if (!(si->flags & SWP_USED) || !si->swap_map)
continue;
if (!--l)
return si;
}
return NULL;
}
static void *swap_next(struct seq_file *swap, void *v, loff_t *pos)
{
struct swap_info_struct *si = v;
int type;
if (v == SEQ_START_TOKEN)
type = 0;
else
type = si->type + 1;
mm/swapfile.c: swap_next should increase position index If seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. In Aug 2018 NeilBrown noticed commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface") "Some ->next functions do not increment *pos when they return NULL... Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps" Described problem is still actual. If you make lseek into middle of last output line following read will output end of last line and whole last line once again. $ dd if=/proc/swaps bs=1 # usual output Filename Type Size Used Priority /dev/dm-0 partition 4194812 97536 -2 104+0 records in 104+0 records out 104 bytes copied $ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice dd: /proc/swaps: cannot skip to specified offset v/dm-0 partition 4194812 97536 -2 /dev/dm-0 partition 4194812 97536 -2 3+1 records in 3+1 records out 131 bytes copied https://bugzilla.kernel.org/show_bug.cgi?id=206283 Link: http://lkml.kernel.org/r/bd8cfd7b-ac95-9b91-f9e7-e8438bd5047d@virtuozzo.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 06:13:39 +00:00
++(*pos);
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
for (; (si = swap_type_to_swap_info(type)); type++) {
if (!(si->flags & SWP_USED) || !si->swap_map)
continue;
return si;
}
return NULL;
}
static void swap_stop(struct seq_file *swap, void *v)
{
mutex_unlock(&swapon_mutex);
}
static int swap_show(struct seq_file *swap, void *v)
{
struct swap_info_struct *si = v;
struct file *file;
int len;
unsigned long bytes, inuse;
if (si == SEQ_START_TOKEN) {
mm/mempool: minor coding style tweaks Various coding style tweaks to various files under mm/ [daizhiyuan@phytium.com.cn: mm/swapfile: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614223624-16055-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/sparse: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227288-19363-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmscan: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227649-19853-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/compaction: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228218-20770-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/oom_kill: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228360-21168-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/shmem: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228504-21491-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/page_alloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228613-21754-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/filemap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228936-22337-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mlock: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613956588-2453-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/frontswap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613962668-15045-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmalloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613963379-15988-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/memory_hotplug: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613971784-24878-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mempolicy: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613972228-25501-1-git-send-email-daizhiyuan@phytium.com.cn Link: https://lkml.kernel.org/r/1614222374-13805-1-git-send-email-daizhiyuan@phytium.com.cn Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 01:40:12 +00:00
seq_puts(swap, "Filename\t\t\t\tType\t\tSize\t\tUsed\t\tPriority\n");
return 0;
}
bytes = K(si->pages);
inuse = K(READ_ONCE(si->inuse_pages));
2020-06-02 04:49:26 +00:00
file = si->swap_file;
len = seq_file_path(swap, file, " \t\n\\");
seq_printf(swap, "%*s%s\t%lu\t%s%lu\t%s%d\n",
len < 40 ? 40 - len : 1, " ",
S_ISBLK(file_inode(file)->i_mode) ?
"partition" : "file\t",
2020-06-02 04:49:26 +00:00
bytes, bytes < 10000000 ? "\t" : "",
inuse, inuse < 10000000 ? "\t" : "",
si->prio);
return 0;
}
static const struct seq_operations swaps_op = {
.start = swap_start,
.next = swap_next,
.stop = swap_stop,
.show = swap_show
};
static int swaps_open(struct inode *inode, struct file *file)
{
struct seq_file *seq;
int ret;
ret = seq_open(file, &swaps_op);
if (ret)
return ret;
seq = file->private_data;
seq->poll_event = atomic_read(&proc_poll_event);
return 0;
}
static const struct proc_ops swaps_proc_ops = {
proc: faster open/read/close with "permanent" files Now that "struct proc_ops" exist we can start putting there stuff which could not fly with VFS "struct file_operations"... Most of fs/proc/inode.c file is dedicated to make open/read/.../close reliable in the event of disappearing /proc entries which usually happens if module is getting removed. Files like /proc/cpuinfo which never disappear simply do not need such protection. Save 2 atomic ops, 1 allocation, 1 free per open/read/close sequence for such "permanent" files. Enable "permanent" flag for /proc/cpuinfo /proc/kmsg /proc/modules /proc/slabinfo /proc/stat /proc/sysvipc/* /proc/swaps More will come once I figure out foolproof way to prevent out module authors from marking their stuff "permanent" for performance reasons when it is not. This should help with scalability: benchmark is "read /proc/cpuinfo R times by N threads scattered over the system". N R t, s (before) t, s (after) ----------------------------------------------------- 64 4096 1.582458 1.530502 -3.2% 256 4096 6.371926 6.125168 -3.9% 1024 4096 25.64888 24.47528 -4.6% Benchmark source: #include <chrono> #include <iostream> #include <thread> #include <vector> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> const int NR_CPUS = sysconf(_SC_NPROCESSORS_ONLN); int N; const char *filename; int R; int xxx = 0; int glue(int n) { cpu_set_t m; CPU_ZERO(&m); CPU_SET(n, &m); return sched_setaffinity(0, sizeof(cpu_set_t), &m); } void f(int n) { glue(n % NR_CPUS); while (*(volatile int *)&xxx == 0) { } for (int i = 0; i < R; i++) { int fd = open(filename, O_RDONLY); char buf[4096]; ssize_t rv = read(fd, buf, sizeof(buf)); asm volatile ("" :: "g" (rv)); close(fd); } } int main(int argc, char *argv[]) { if (argc < 4) { std::cerr << "usage: " << argv[0] << ' ' << "N /proc/filename R "; return 1; } N = atoi(argv[1]); filename = argv[2]; R = atoi(argv[3]); for (int i = 0; i < NR_CPUS; i++) { if (glue(i) == 0) break; } std::vector<std::thread> T; T.reserve(N); for (int i = 0; i < N; i++) { T.emplace_back(f, i); } auto t0 = std::chrono::system_clock::now(); { *(volatile int *)&xxx = 1; for (auto& t: T) { t.join(); } } auto t1 = std::chrono::system_clock::now(); std::chrono::duration<double> dt = t1 - t0; std::cout << dt.count() << ' '; return 0; } P.S.: Explicit randomization marker is added because adding non-function pointer will silently disable structure layout randomization. [akpm@linux-foundation.org: coding style fixes] Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200222201539.GA22576@avx2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:09:01 +00:00
.proc_flags = PROC_ENTRY_PERMANENT,
.proc_open = swaps_open,
.proc_read = seq_read,
.proc_lseek = seq_lseek,
.proc_release = seq_release,
.proc_poll = swaps_poll,
};
static int __init procswaps_init(void)
{
proc_create("swaps", 0, NULL, &swaps_proc_ops);
return 0;
}
__initcall(procswaps_init);
#endif /* CONFIG_PROC_FS */
#ifdef MAX_SWAPFILES_CHECK
static int __init max_swapfiles_check(void)
{
MAX_SWAPFILES_CHECK();
return 0;
}
late_initcall(max_swapfiles_check);
#endif
static struct swap_info_struct *alloc_swap_info(void)
{
struct swap_info_struct *p;
struct swap_info_struct *defer = NULL;
unsigned int type;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
int i;
p = kvzalloc(struct_size(p, avail_lists, nr_node_ids), GFP_KERNEL);
if (!p)
return ERR_PTR(-ENOMEM);
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
if (percpu_ref_init(&p->users, swap_users_ref_free,
PERCPU_REF_INIT_DEAD, GFP_KERNEL)) {
kvfree(p);
return ERR_PTR(-ENOMEM);
}
spin_lock(&swap_lock);
for (type = 0; type < nr_swapfiles; type++) {
if (!(swap_info[type]->flags & SWP_USED))
break;
}
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
if (type >= MAX_SWAPFILES) {
spin_unlock(&swap_lock);
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
percpu_ref_exit(&p->users);
kvfree(p);
return ERR_PTR(-EPERM);
}
if (type >= nr_swapfiles) {
p->type = type;
/*
mm, swap: remove unnecessary smp_rmb() in swap_type_to_swap_info() Before commit c10d38cc8d3e ("mm, swap: bounds check swap_info array accesses to avoid NULL derefs"), the typical code to reference the swap_info[] is as follows, type = swp_type(swp_entry); if (type >= nr_swapfiles) /* handle invalid swp_entry */; p = swap_info[type]; /* access fields of *p. OOPS! p may be NULL! */ Because the ordering isn't guaranteed, it's possible that swap_info[type] is read before "nr_swapfiles". And that may result in NULL pointer dereference. So after commit c10d38cc8d3e, the code becomes, struct swap_info_struct *swap_type_to_swap_info(int type) { if (type >= READ_ONCE(nr_swapfiles)) return NULL; smp_rmb(); return READ_ONCE(swap_info[type]); } /* users */ type = swp_type(swp_entry); p = swap_type_to_swap_info(type); if (!p) /* handle invalid swp_entry */; /* dereference p */ Where the value of swap_info[type] (that is, "p") is checked to be non-zero before being dereferenced. So, the NULL deferencing becomes impossible even if "nr_swapfiles" is read after swap_info[type]. Therefore, the "smp_rmb()" becomes unnecessary. And, we don't even need to read "nr_swapfiles" here. Because the non-zero checking for "p" is sufficient. We just need to make sure we will not access out of the boundary of the array. With the change, nr_swapfiles will only be accessed with swap_lock held, except in swapcache_free_entries(). Where the absolute correctness of the value isn't needed, as described in the comments. We still need to guarantee swap_info[type] is read before being dereferenced. That can be satisfied via the data dependency ordering enforced by READ_ONCE(swap_info[type]). This needs to be paired with proper write barriers. So smp_store_release() is used in alloc_swap_info() to guarantee the fields of *swap_info[type] is initialized before swap_info[type] itself being written. Note that the fields of *swap_info[type] is initialized to be 0 via kvzalloc() firstly. The assignment and deferencing of swap_info[type] is like rcu_assign_pointer() and rcu_dereference(). Link: https://lkml.kernel.org/r/20210520073301.1676294-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:37:09 +00:00
* Publish the swap_info_struct after initializing it.
* Note that kvzalloc() above zeroes all its fields.
*/
mm, swap: remove unnecessary smp_rmb() in swap_type_to_swap_info() Before commit c10d38cc8d3e ("mm, swap: bounds check swap_info array accesses to avoid NULL derefs"), the typical code to reference the swap_info[] is as follows, type = swp_type(swp_entry); if (type >= nr_swapfiles) /* handle invalid swp_entry */; p = swap_info[type]; /* access fields of *p. OOPS! p may be NULL! */ Because the ordering isn't guaranteed, it's possible that swap_info[type] is read before "nr_swapfiles". And that may result in NULL pointer dereference. So after commit c10d38cc8d3e, the code becomes, struct swap_info_struct *swap_type_to_swap_info(int type) { if (type >= READ_ONCE(nr_swapfiles)) return NULL; smp_rmb(); return READ_ONCE(swap_info[type]); } /* users */ type = swp_type(swp_entry); p = swap_type_to_swap_info(type); if (!p) /* handle invalid swp_entry */; /* dereference p */ Where the value of swap_info[type] (that is, "p") is checked to be non-zero before being dereferenced. So, the NULL deferencing becomes impossible even if "nr_swapfiles" is read after swap_info[type]. Therefore, the "smp_rmb()" becomes unnecessary. And, we don't even need to read "nr_swapfiles" here. Because the non-zero checking for "p" is sufficient. We just need to make sure we will not access out of the boundary of the array. With the change, nr_swapfiles will only be accessed with swap_lock held, except in swapcache_free_entries(). Where the absolute correctness of the value isn't needed, as described in the comments. We still need to guarantee swap_info[type] is read before being dereferenced. That can be satisfied via the data dependency ordering enforced by READ_ONCE(swap_info[type]). This needs to be paired with proper write barriers. So smp_store_release() is used in alloc_swap_info() to guarantee the fields of *swap_info[type] is initialized before swap_info[type] itself being written. Note that the fields of *swap_info[type] is initialized to be 0 via kvzalloc() firstly. The assignment and deferencing of swap_info[type] is like rcu_assign_pointer() and rcu_dereference(). Link: https://lkml.kernel.org/r/20210520073301.1676294-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:37:09 +00:00
smp_store_release(&swap_info[type], p); /* rcu_assign_pointer() */
nr_swapfiles++;
} else {
defer = p;
p = swap_info[type];
/*
* Do not memset this entry: a racing procfs swap_next()
* would be relying on p->type to remain valid.
*/
}
mm, swap: use rbtree for swap_extent swap_extent is used to map swap page offset to backing device's block offset. For a continuous block range, one swap_extent is used and all these swap_extents are managed in a linked list. These swap_extents are used by map_swap_entry() during swap's read and write path. To find out the backing device's block offset for a page offset, the swap_extent list will be traversed linearly, with curr_swap_extent being used as a cache to speed up the search. This works well as long as swap_extents are not huge or when the number of processes that access swap device are few, but when the swap device has many extents and there are a number of processes accessing the swap device concurrently, it can be a problem. On one of our servers, the disk's remaining size is tight: $df -h Filesystem Size Used Avail Use% Mounted on ... ... /dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4 When creating a 80G swapfile there, there are as many as 84656 swap extents. The end result is, kernel spends abou 30% time in map_swap_entry() and swap throughput is only 70MB/s. As a comparison, when I used smaller sized swapfile, like 4G whose swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and map_swap_entry() is about 3%. One downside of using rbtree for swap_extent is, 'struct rbtree' takes 24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more for each swap_extent. For a swapfile that has 80k swap_extents, that means 625KiB more memory consumed. Test: Since it's not possible to reboot that server, I can not test this patch diretly there. Instead, I tested it on another server with NVMe disk. I created a 20G swapfile on an NVMe backed XFS fs. By default, the filesystem is quite clean and the created swapfile has only 2 extents. Testing vanilla and this patch shows no obvious performance difference when swapfile is not fragmented. To see the patch's effects, I used some tweaks to manually fragment the swapfile by breaking the extent at 1M boundary. This made the swapfile have 20K extents. nr_task=4 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 165191 90.77% 171798 90.21% patched 858993 +420% 2.16% 715827 +317% 0.77% nr_task=8 kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf) vanilla 306783 92.19% 318145 87.76% patched 954437 +211% 2.35% 1073741 +237% 1.57% swapout: the throughput of swap out, in KB/s, higher is better 1st map_swap_entry: cpu cycles percent sampled by perf swapin: the throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry: cpu cycles percent sampled by perf nr_task=1 doesn't show any difference, this is due to the curr_swap_extent can be effectively used to cache the correct swap extent for single task workload. [akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/] Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:41 +00:00
p->swap_extent_root = RB_ROOT;
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:09:59 +00:00
plist_node_init(&p->list, 0);
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
for_each_node(i)
plist_node_init(&p->avail_lists[i], 0);
p->flags = SWP_USED;
spin_unlock(&swap_lock);
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
if (defer) {
percpu_ref_exit(&defer->users);
kvfree(defer);
}
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_lock_init(&p->lock);
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
spin_lock_init(&p->cont_lock);
mm/swapfile: use percpu_ref to serialize against concurrent swapoff Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 02:36:46 +00:00
init_completion(&p->comp);
return p;
}
static int claim_swapfile(struct swap_info_struct *si, struct inode *inode)
{
if (S_ISBLK(inode->i_mode)) {
si->bdev = I_BDEV(inode);
/*
* Zoned block devices contain zones that have a sequential
* write only restriction. Hence zoned block devices are not
* suitable for swapping. Disallow them here.
*/
if (bdev_is_zoned(si->bdev))
return -EINVAL;
si->flags |= SWP_BLKDEV;
} else if (S_ISREG(inode->i_mode)) {
si->bdev = inode->i_sb->s_bdev;
}
return 0;
}
/*
* Find out how many pages are allowed for a single swap device. There
* are two limiting factors:
* 1) the number of bits for the swap offset in the swp_entry_t type, and
* 2) the number of bits in the swap pte, as defined by the different
* architectures.
*
* In order to find the largest possible bit mask, a swap entry with
* swap type 0 and swap offset ~0UL is created, encoded to a swap pte,
* decoded to a swp_entry_t again, and finally the swap offset is
* extracted.
*
* This will mask all the bits from the initial ~0UL mask that can't
* be encoded in either the swp_entry_t or the architecture definition
* of a swap pte.
*/
unsigned long generic_max_swapfile_size(void)
{
return swp_offset(pte_to_swp_entry(
swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
}
/* Can be overridden by an architecture for additional checks. */
mm/swap: cache maximum swapfile size when init swap We used to have swapfile_maximum_size() fetching a maximum value of swapfile size per-arch. As the caller of max_swapfile_size() grows, this patch introduce a variable "swapfile_maximum_size" and cache the value of old max_swapfile_size(), so that we don't need to calculate the value every time. Caching the value in swapfile_init() is safe because when reaching the phase we should have initialized all the relevant information. Here the major arch to take care of is x86, which defines the max swapfile size based on L1TF mitigation. Here both X86_BUG_L1TF or l1tf_mitigation should have been setup properly when reaching swapfile_init(). As a reference, the code path looks like this for x86: - start_kernel - setup_arch - early_cpu_init - early_identify_cpu --> setup X86_BUG_L1TF - parse_early_param - l1tf_cmdline --> set l1tf_mitigation - check_bugs - l1tf_select_mitigation --> set l1tf_mitigation - arch_call_rest_init - rest_init - kernel_init - kernel_init_freeable - do_basic_setup - do_initcalls --> calls swapfile_init() (initcall level 4) The swapfile size only depends on swp pte format on non-x86 archs, so caching it is safe too. Since at it, rename max_swapfile_size() to arch_max_swapfile_size() because arch can define its own function, so it's more straightforward to have "arch_" as its prefix. At the meantime, export swapfile_maximum_size to replace the old usages of max_swapfile_size(). [peterx@redhat.com: declare arch_max_swapfile_size) in swapfile.h] Link: https://lkml.kernel.org/r/YxTh1GuC6ro5fKL5@xz-m1.local Link: https://lkml.kernel.org/r/20220811161331.37055-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:30 +00:00
__weak unsigned long arch_max_swapfile_size(void)
{
return generic_max_swapfile_size();
}
static unsigned long read_swap_header(struct swap_info_struct *si,
union swap_header *swap_header,
struct inode *inode)
{
int i;
unsigned long maxpages;
unsigned long swapfilepages;
unsigned long last_page;
if (memcmp("SWAPSPACE2", swap_header->magic.magic, 10)) {
pr_err("Unable to find swap-space signature\n");
return 0;
}
/* swap partition endianness hack... */
if (swab32(swap_header->info.version) == 1) {
swab32s(&swap_header->info.version);
swab32s(&swap_header->info.last_page);
swab32s(&swap_header->info.nr_badpages);
if (swap_header->info.nr_badpages > MAX_SWAP_BADPAGES)
return 0;
for (i = 0; i < swap_header->info.nr_badpages; i++)
swab32s(&swap_header->info.badpages[i]);
}
/* Check the swap header's sub-version */
if (swap_header->info.version != 1) {
pr_warn("Unable to handle swap header version %d\n",
swap_header->info.version);
return 0;
}
si->lowest_bit = 1;
si->cluster_next = 1;
si->cluster_nr = 0;
mm/swap: cache maximum swapfile size when init swap We used to have swapfile_maximum_size() fetching a maximum value of swapfile size per-arch. As the caller of max_swapfile_size() grows, this patch introduce a variable "swapfile_maximum_size" and cache the value of old max_swapfile_size(), so that we don't need to calculate the value every time. Caching the value in swapfile_init() is safe because when reaching the phase we should have initialized all the relevant information. Here the major arch to take care of is x86, which defines the max swapfile size based on L1TF mitigation. Here both X86_BUG_L1TF or l1tf_mitigation should have been setup properly when reaching swapfile_init(). As a reference, the code path looks like this for x86: - start_kernel - setup_arch - early_cpu_init - early_identify_cpu --> setup X86_BUG_L1TF - parse_early_param - l1tf_cmdline --> set l1tf_mitigation - check_bugs - l1tf_select_mitigation --> set l1tf_mitigation - arch_call_rest_init - rest_init - kernel_init - kernel_init_freeable - do_basic_setup - do_initcalls --> calls swapfile_init() (initcall level 4) The swapfile size only depends on swp pte format on non-x86 archs, so caching it is safe too. Since at it, rename max_swapfile_size() to arch_max_swapfile_size() because arch can define its own function, so it's more straightforward to have "arch_" as its prefix. At the meantime, export swapfile_maximum_size to replace the old usages of max_swapfile_size(). [peterx@redhat.com: declare arch_max_swapfile_size) in swapfile.h] Link: https://lkml.kernel.org/r/YxTh1GuC6ro5fKL5@xz-m1.local Link: https://lkml.kernel.org/r/20220811161331.37055-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:30 +00:00
maxpages = swapfile_maximum_size;
last_page = swap_header->info.last_page;
if (!last_page) {
pr_warn("Empty swap-file\n");
return 0;
}
if (last_page > maxpages) {
pr_warn("Truncating oversized swap area, only using %luk out of %luk\n",
K(maxpages), K(last_page));
}
if (maxpages > last_page) {
maxpages = last_page + 1;
/* p->max is an unsigned int: don't overflow it */
if ((unsigned int)maxpages == 0)
maxpages = UINT_MAX;
}
si->highest_bit = maxpages - 1;
if (!maxpages)
return 0;
swapfilepages = i_size_read(inode) >> PAGE_SHIFT;
if (swapfilepages && maxpages > swapfilepages) {
pr_warn("Swap area shorter than signature indicates\n");
return 0;
}
if (swap_header->info.nr_badpages && S_ISREG(inode->i_mode))
return 0;
if (swap_header->info.nr_badpages > MAX_SWAP_BADPAGES)
return 0;
return maxpages;
}
mm/swap: split swap cache into 64MB trunks The patch is to improve the scalability of the swap out/in via using fine grained locks for the swap cache. In current kernel, one address space will be used for each swap device. And in the common configuration, the number of the swap device is very small (one is typical). This causes the heavy lock contention on the radix tree of the address space if multiple tasks swap out/in concurrently. But in fact, there is no dependency between pages in the swap cache. So that, we can split the one shared address space for each swap device into several address spaces to reduce the lock contention. In the patch, the shared address space is split into 64MB trunks. 64MB is chosen to balance the memory space usage and effect of lock contention reduction. The size of struct address_space on x86_64 architecture is 408B, so with the patch, 6528B more memory will be used for every 1GB swap space on x86_64 architecture. One address space is still shared for the swap entries in the same 64M trunks. To avoid lock contention for the first round of swap space allocation, the order of the swap clusters in the initial free clusters list is changed. The swap space distance between the consecutive swap clusters in the free cluster list is at least 64M. After the first round of allocation, the swap clusters are expected to be freed randomly, so the lock contention should be reduced effectively. Link: http://lkml.kernel.org/r/735bab895e64c930581ffb0a05b661e01da82bc5.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:26 +00:00
#define SWAP_CLUSTER_INFO_COLS \
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
DIV_ROUND_UP(L1_CACHE_BYTES, sizeof(struct swap_cluster_info))
mm/swap: split swap cache into 64MB trunks The patch is to improve the scalability of the swap out/in via using fine grained locks for the swap cache. In current kernel, one address space will be used for each swap device. And in the common configuration, the number of the swap device is very small (one is typical). This causes the heavy lock contention on the radix tree of the address space if multiple tasks swap out/in concurrently. But in fact, there is no dependency between pages in the swap cache. So that, we can split the one shared address space for each swap device into several address spaces to reduce the lock contention. In the patch, the shared address space is split into 64MB trunks. 64MB is chosen to balance the memory space usage and effect of lock contention reduction. The size of struct address_space on x86_64 architecture is 408B, so with the patch, 6528B more memory will be used for every 1GB swap space on x86_64 architecture. One address space is still shared for the swap entries in the same 64M trunks. To avoid lock contention for the first round of swap space allocation, the order of the swap clusters in the initial free clusters list is changed. The swap space distance between the consecutive swap clusters in the free cluster list is at least 64M. After the first round of allocation, the swap clusters are expected to be freed randomly, so the lock contention should be reduced effectively. Link: http://lkml.kernel.org/r/735bab895e64c930581ffb0a05b661e01da82bc5.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:26 +00:00
#define SWAP_CLUSTER_SPACE_COLS \
DIV_ROUND_UP(SWAP_ADDRESS_SPACE_PAGES, SWAPFILE_CLUSTER)
#define SWAP_CLUSTER_COLS \
max_t(unsigned int, SWAP_CLUSTER_INFO_COLS, SWAP_CLUSTER_SPACE_COLS)
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
static int setup_swap_map_and_extents(struct swap_info_struct *si,
union swap_header *swap_header,
unsigned char *swap_map,
unsigned long maxpages,
sector_t *span)
{
unsigned int nr_good_pages;
unsigned long i;
int nr_extents;
nr_good_pages = maxpages - 1; /* omit header page */
for (i = 0; i < swap_header->info.nr_badpages; i++) {
unsigned int page_nr = swap_header->info.badpages[i];
if (page_nr == 0 || page_nr > swap_header->info.last_page)
return -EINVAL;
if (page_nr < maxpages) {
swap_map[page_nr] = SWAP_MAP_BAD;
nr_good_pages--;
}
}
if (nr_good_pages) {
swap_map[0] = SWAP_MAP_BAD;
si->max = maxpages;
si->pages = nr_good_pages;
nr_extents = setup_swap_extents(si, span);
if (nr_extents < 0)
return nr_extents;
nr_good_pages = si->pages;
}
if (!nr_good_pages) {
pr_warn("Empty swap-file\n");
return -EINVAL;
}
return nr_extents;
}
static struct swap_cluster_info *setup_clusters(struct swap_info_struct *si,
union swap_header *swap_header,
unsigned long maxpages)
{
unsigned long nr_clusters = DIV_ROUND_UP(maxpages, SWAPFILE_CLUSTER);
unsigned long col = si->cluster_next / SWAPFILE_CLUSTER % SWAP_CLUSTER_COLS;
struct swap_cluster_info *cluster_info;
unsigned long i, j, k, idx;
int cpu, err = -ENOMEM;
cluster_info = kvcalloc(nr_clusters, sizeof(*cluster_info), GFP_KERNEL);
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
if (!cluster_info)
goto err;
for (i = 0; i < nr_clusters; i++)
spin_lock_init(&cluster_info[i].lock);
si->cluster_next_cpu = alloc_percpu(unsigned int);
if (!si->cluster_next_cpu)
goto err_free;
/* Random start position to help with wear leveling */
for_each_possible_cpu(cpu)
per_cpu(*si->cluster_next_cpu, cpu) =
get_random_u32_inclusive(1, si->highest_bit);
si->percpu_cluster = alloc_percpu(struct percpu_cluster);
if (!si->percpu_cluster)
goto err_free;
for_each_possible_cpu(cpu) {
struct percpu_cluster *cluster;
cluster = per_cpu_ptr(si->percpu_cluster, cpu);
for (i = 0; i < SWAP_NR_ORDERS; i++)
cluster->next[i] = SWAP_NEXT_INVALID;
}
/*
* Mark unusable pages as unavailable. The clusters aren't
* marked free yet, so no list operations are involved yet.
*
* See setup_swap_map_and_extents(): header page, bad pages,
* and the EOF part of the last cluster.
*/
inc_cluster_info_page(si, cluster_info, 0);
for (i = 0; i < swap_header->info.nr_badpages; i++)
inc_cluster_info_page(si, cluster_info,
swap_header->info.badpages[i]);
for (i = maxpages; i < round_up(maxpages, SWAPFILE_CLUSTER); i++)
inc_cluster_info_page(si, cluster_info, i);
INIT_LIST_HEAD(&si->free_clusters);
INIT_LIST_HEAD(&si->full_clusters);
INIT_LIST_HEAD(&si->discard_clusters);
for (i = 0; i < SWAP_NR_ORDERS; i++) {
INIT_LIST_HEAD(&si->nonfull_clusters[i]);
INIT_LIST_HEAD(&si->frag_clusters[i]);
si->frag_cluster_nr[i] = 0;
}
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
mm/swap: split swap cache into 64MB trunks The patch is to improve the scalability of the swap out/in via using fine grained locks for the swap cache. In current kernel, one address space will be used for each swap device. And in the common configuration, the number of the swap device is very small (one is typical). This causes the heavy lock contention on the radix tree of the address space if multiple tasks swap out/in concurrently. But in fact, there is no dependency between pages in the swap cache. So that, we can split the one shared address space for each swap device into several address spaces to reduce the lock contention. In the patch, the shared address space is split into 64MB trunks. 64MB is chosen to balance the memory space usage and effect of lock contention reduction. The size of struct address_space on x86_64 architecture is 408B, so with the patch, 6528B more memory will be used for every 1GB swap space on x86_64 architecture. One address space is still shared for the swap entries in the same 64M trunks. To avoid lock contention for the first round of swap space allocation, the order of the swap clusters in the initial free clusters list is changed. The swap space distance between the consecutive swap clusters in the free cluster list is at least 64M. After the first round of allocation, the swap clusters are expected to be freed randomly, so the lock contention should be reduced effectively. Link: http://lkml.kernel.org/r/735bab895e64c930581ffb0a05b661e01da82bc5.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:26 +00:00
/*
* Reduce false cache line sharing between cluster_info and
* sharing same address space.
*/
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
for (k = 0; k < SWAP_CLUSTER_COLS; k++) {
j = (k + col) % SWAP_CLUSTER_COLS;
for (i = 0; i < DIV_ROUND_UP(nr_clusters, SWAP_CLUSTER_COLS); i++) {
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
struct swap_cluster_info *ci;
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
idx = i * SWAP_CLUSTER_COLS + j;
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
ci = cluster_info + idx;
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
if (idx >= nr_clusters)
continue;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
if (ci->count) {
ci->flags = CLUSTER_FLAG_NONFULL;
list_add_tail(&ci->list, &si->nonfull_clusters[0]);
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
continue;
mm: swap: separate SSD allocation from scan_swap_map_slots() Previously the SSD and HDD share the same swap_map scan loop in scan_swap_map_slots(). This function is complex and hard to flow the execution flow. scan_swap_map_try_ssd_cluster() can already do most of the heavy lifting to locate the candidate swap range in the cluster. However it needs to go back to scan_swap_map_slots() to check conflict and then perform the allocation. When scan_swap_map_try_ssd_cluster() failed, it still depended on the scan_swap_map_slots() to do brute force scanning of the swap_map. When the swapfile is large and almost full, it will take some CPU time to go through the swap_map array. Get rid of the cluster allocation dependency on the swap_map scan loop in scan_swap_map_slots(). Streamline the cluster allocation code path. No more conflict checks. For order 0 swap entry, when run out of free and nonfull list. It will allocate from the higher order nonfull cluster list. Users should see less CPU time spent on searching the free swap slot when swapfile is almost full. [ryncsn@gmail.com: fix array-bounds error with CONFIG_THP_SWAP=n] Link: https://lkml.kernel.org/r/CAMgjq7Bz0DY+rY0XgCoH7-Q=uHLdo3omi8kUr4ePDweNyofsbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-3-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:15 +00:00
}
mm: swap: swap cluster switch to double link list Patch series "mm: swap: mTHP swap allocator base on swap cluster order", v5. This is the short term solutions "swap cluster order" listed in my "Swap Abstraction" discussion slice 8 in the recent LSF/MM conference. When commit 845982eb264bc "mm: swap: allow storage of all mTHP orders" is introduced, it only allocates the mTHP swap entries from the new empty cluster list.  It has a fragmentation issue reported by Barry. https://lore.kernel.org/all/CAGsJ_4zAcJkuW016Cfi6wicRr8N9X+GJJhgMQdSMp+Ah+NSgNQ@mail.gmail.com/ The reason is that all the empty clusters have been exhausted while there are plenty of free swap entries in the cluster that are not 100% free. Remember the swap allocation order in the cluster. Keep track of the per order non full cluster list for later allocation. This series gives the swap SSD allocation a new separate code path from the HDD allocation. The new allocator use cluster list only and do not global scan swap_map[] without lock any more. This streamline the swap allocation for SSD. The code matches the execution flow much better. User impact: For users that allocate and free mix order mTHP swapping, It greatly improves the success rate of the mTHP swap allocation after the initial phase. It also performs faster when the swapfile is close to full, because the allocator can get the non full cluster from a list rather than scanning a lot of swap_map entries.  With Barry's mthp test program V2: Without: $ ./thp_swap_allocator_test -a Iteration 1: swpout inc: 32, swpout fallback inc: 192, Fallback percentage: 85.71% Iteration 2: swpout inc: 0, swpout fallback inc: 231, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 227, Fallback percentage: 100.00% ... Iteration 98: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 215, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -a -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test -s Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% $ ./thp_swap_allocator_test Iteration 1: swpout inc: 0, swpout fallback inc: 224, Fallback percentage: 100.00% Iteration 2: swpout inc: 0, swpout fallback inc: 218, Fallback percentage: 100.00% Iteration 3: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% .. Iteration 98: swpout inc: 0, swpout fallback inc: 228, Fallback percentage: 100.00% Iteration 99: swpout inc: 0, swpout fallback inc: 230, Fallback percentage: 100.00% Iteration 100: swpout inc: 0, swpout fallback inc: 229, Fallback percentage: 100.00% With: # with all 0.00% filter out $ ./thp_swap_allocator_test -a | grep -v "0.00%" $ # all result are 0.00% $ ./thp_swap_allocator_test -a -s | grep -v "0.00%" ./thp_swap_allocator_test -a -s | grep -v "0.00%" Iteration 14: swpout inc: 223, swpout fallback inc: 3, Fallback percentage: 1.33% Iteration 19: swpout inc: 219, swpout fallback inc: 7, Fallback percentage: 3.10% Iteration 28: swpout inc: 225, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 29: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 34: swpout inc: 220, swpout fallback inc: 8, Fallback percentage: 3.51% Iteration 35: swpout inc: 222, swpout fallback inc: 11, Fallback percentage: 4.72% Iteration 38: swpout inc: 217, swpout fallback inc: 4, Fallback percentage: 1.81% Iteration 40: swpout inc: 222, swpout fallback inc: 6, Fallback percentage: 2.63% Iteration 42: swpout inc: 221, swpout fallback inc: 2, Fallback percentage: 0.90% Iteration 43: swpout inc: 215, swpout fallback inc: 7, Fallback percentage: 3.15% Iteration 47: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 49: swpout inc: 217, swpout fallback inc: 1, Fallback percentage: 0.46% Iteration 52: swpout inc: 221, swpout fallback inc: 8, Fallback percentage: 3.49% Iteration 56: swpout inc: 224, swpout fallback inc: 4, Fallback percentage: 1.75% Iteration 58: swpout inc: 214, swpout fallback inc: 5, Fallback percentage: 2.28% Iteration 62: swpout inc: 220, swpout fallback inc: 3, Fallback percentage: 1.35% Iteration 64: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 67: swpout inc: 221, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 75: swpout inc: 220, swpout fallback inc: 9, Fallback percentage: 3.93% Iteration 82: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 86: swpout inc: 211, swpout fallback inc: 12, Fallback percentage: 5.38% Iteration 89: swpout inc: 226, swpout fallback inc: 2, Fallback percentage: 0.88% Iteration 93: swpout inc: 220, swpout fallback inc: 1, Fallback percentage: 0.45% Iteration 94: swpout inc: 224, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 96: swpout inc: 221, swpout fallback inc: 6, Fallback percentage: 2.64% Iteration 98: swpout inc: 227, swpout fallback inc: 1, Fallback percentage: 0.44% Iteration 99: swpout inc: 227, swpout fallback inc: 3, Fallback percentage: 1.30% $ ./thp_swap_allocator_test ./thp_swap_allocator_test Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 131, swpout fallback inc: 101, Fallback percentage: 43.53% Iteration 3: swpout inc: 71, swpout fallback inc: 155, Fallback percentage: 68.58% Iteration 4: swpout inc: 55, swpout fallback inc: 168, Fallback percentage: 75.34% Iteration 5: swpout inc: 35, swpout fallback inc: 191, Fallback percentage: 84.51% Iteration 6: swpout inc: 25, swpout fallback inc: 199, Fallback percentage: 88.84% Iteration 7: swpout inc: 23, swpout fallback inc: 205, Fallback percentage: 89.91% Iteration 8: swpout inc: 9, swpout fallback inc: 219, Fallback percentage: 96.05% Iteration 9: swpout inc: 13, swpout fallback inc: 213, Fallback percentage: 94.25% Iteration 10: swpout inc: 12, swpout fallback inc: 216, Fallback percentage: 94.74% Iteration 11: swpout inc: 16, swpout fallback inc: 213, Fallback percentage: 93.01% Iteration 12: swpout inc: 10, swpout fallback inc: 210, Fallback percentage: 95.45% Iteration 13: swpout inc: 16, swpout fallback inc: 212, Fallback percentage: 92.98% Iteration 14: swpout inc: 12, swpout fallback inc: 212, Fallback percentage: 94.64% Iteration 15: swpout inc: 15, swpout fallback inc: 211, Fallback percentage: 93.36% Iteration 16: swpout inc: 15, swpout fallback inc: 200, Fallback percentage: 93.02% Iteration 17: swpout inc: 9, swpout fallback inc: 220, Fallback percentage: 96.07% $ ./thp_swap_allocator_test -s ./thp_swap_allocator_test -s Iteration 1: swpout inc: 233, swpout fallback inc: 0, Fallback percentage: 0.00% Iteration 2: swpout inc: 97, swpout fallback inc: 135, Fallback percentage: 58.19% Iteration 3: swpout inc: 42, swpout fallback inc: 192, Fallback percentage: 82.05% Iteration 4: swpout inc: 19, swpout fallback inc: 214, Fallback percentage: 91.85% Iteration 5: swpout inc: 12, swpout fallback inc: 213, Fallback percentage: 94.67% Iteration 6: swpout inc: 11, swpout fallback inc: 217, Fallback percentage: 95.18% Iteration 7: swpout inc: 9, swpout fallback inc: 214, Fallback percentage: 95.96% Iteration 8: swpout inc: 8, swpout fallback inc: 213, Fallback percentage: 96.38% Iteration 9: swpout inc: 2, swpout fallback inc: 223, Fallback percentage: 99.11% Iteration 10: swpout inc: 2, swpout fallback inc: 228, Fallback percentage: 99.13% Iteration 11: swpout inc: 4, swpout fallback inc: 214, Fallback percentage: 98.17% Iteration 12: swpout inc: 5, swpout fallback inc: 226, Fallback percentage: 97.84% Iteration 13: swpout inc: 3, swpout fallback inc: 212, Fallback percentage: 98.60% Iteration 14: swpout inc: 0, swpout fallback inc: 222, Fallback percentage: 100.00% Iteration 15: swpout inc: 3, swpout fallback inc: 222, Fallback percentage: 98.67% Iteration 16: swpout inc: 4, swpout fallback inc: 223, Fallback percentage: 98.24% ========= Kernel compile under tmpfs with cgroup memory.max = 470M. 12 core 24 hyperthreading, 32 jobs. 10 Run each group SSD swap 10 runs average, 20G swap partition: With: user 2929.064 system 1479.381 : 1376.89 1398.22 1444.64 1477.39 1479.04 1497.27 1504.47 1531.4 1532.92 1551.57 real 1441.324 Without: user 2910.872 system 1482.732 : 1440.01 1451.4 1462.01 1467.47 1467.51 1469.3 1470.19 1496.32 1544.1 1559.01 real 1580.822 Two zram swap: zram0 3.0G zram1 20G. The idea is forcing the zram0 almost full then overflow to zram1: With: user 4320.301 system 4272.403 : 4236.24 4262.81 4264.75 4269.13 4269.44 4273.06 4279.85 4285.98 4289.64 4293.13 real 431.759 Without user 4301.393 system 4387.672 : 4374.47 4378.3 4380.95 4382.84 4383.06 4388.05 4389.76 4397.16 4398.23 4403.9 real 433.979 ------ more test result from Kaiui ---------- Test with build linux kernel using a 4G ZRAM, 1G memory.max limit on top of shmem: System info: 32 Core AMD Zen2, 64G total memory. Test 3 times using only 4K pages: ================================= With: ----- 1838.74user 2411.21system 2:37.86elapsed 2692%CPU (0avgtext+0avgdata 847060maxresident)k 1839.86user 2465.77system 2:39.35elapsed 2701%CPU (0avgtext+0avgdata 847060maxresident)k 1840.26user 2454.68system 2:39.43elapsed 2693%CPU (0avgtext+0avgdata 847060maxresident)k Summary (~4.6% improment of system time): User: 1839.62 System: 2443.89: 2465.77 2454.68 2411.21 Real: 158.88 Without: -------- 1837.99user 2575.95system 2:43.09elapsed 2706%CPU (0avgtext+0avgdata 846520maxresident)k 1838.32user 2555.15system 2:42.52elapsed 2709%CPU (0avgtext+0avgdata 846520maxresident)k 1843.02user 2561.55system 2:43.35elapsed 2702%CPU (0avgtext+0avgdata 846520maxresident)k Summary: User: 1839.78 System: 2564.22: 2575.95 2555.15 2561.55 Real: 162.99 Test 5 times using enabled all mTHP pages: ========================================== With: ----- 1796.44user 2937.33system 2:59.09elapsed 2643%CPU (0avgtext+0avgdata 846936maxresident)k 1802.55user 3002.32system 2:54.68elapsed 2750%CPU (0avgtext+0avgdata 847072maxresident)k 1806.59user 2986.53system 2:55.17elapsed 2736%CPU (0avgtext+0avgdata 847092maxresident)k 1803.27user 2982.40system 2:54.49elapsed 2742%CPU (0avgtext+0avgdata 846796maxresident)k 1807.43user 3036.08system 2:56.06elapsed 2751%CPU (0avgtext+0avgdata 846488maxresident)k Summary (~8.4% improvement of system time): User: 1803.25 System: 2988.93: 2937.33 3002.32 2986.53 2982.40 3036.08 Real: 175.90 mTHP swapout status: /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout:347721 /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpout_fallback:3110 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout:3365 /sys/kernel/mm/transparent_hugepage/hugepages-512kB/stats/swpout_fallback:8269 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout:24 /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/stats/swpout_fallback:3341 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout:145 /sys/kernel/mm/transparent_hugepage/hugepages-1024kB/stats/swpout_fallback:5038 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout:322737 /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpout_fallback:36808 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout:380455 /sys/kernel/mm/transparent_hugepage/hugepages-16kB/stats/swpout_fallback:1010 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout:24973 /sys/kernel/mm/transparent_hugepage/hugepages-256kB/stats/swpout_fallback:13223 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout:197348 /sys/kernel/mm/transparent_hugepage/hugepages-128kB/stats/swpout_fallback:80541 Without: -------- 1794.41user 3151.29system 3:05.97elapsed 2659%CPU (0avgtext+0avgdata 846704maxresident)k 1810.27user 3304.48system 3:05.38elapsed 2759%CPU (0avgtext+0avgdata 846636maxresident)k 1809.84user 3254.85system 3:03.83elapsed 2755%CPU (0avgtext+0avgdata 846952maxresident)k 1813.54user 3259.56system 3:04.28elapsed 2752%CPU (0avgtext+0avgdata 846848maxresident)k 1829.97user 3338.40system 3:07.32elapsed 2759%CPU (0avgtext+0avgdata 847024maxresident)k Summary: User: 1811.61 System: 3261.72 : 3151.29 3304.48 3254.85 3259.56 3338.40 Real: 185.356 mTHP swapout status: hugepages-32kB/stats/swpout:35630 hugepages-32kB/stats/swpout_fallback:1809908 hugepages-512kB/stats/swpout:523 hugepages-512kB/stats/swpout_fallback:55235 hugepages-2048kB/stats/swpout:53 hugepages-2048kB/stats/swpout_fallback:17264 hugepages-1024kB/stats/swpout:85 hugepages-1024kB/stats/swpout_fallback:24979 hugepages-64kB/stats/swpout:30117 hugepages-64kB/stats/swpout_fallback:1825399 hugepages-16kB/stats/swpout:42775 hugepages-16kB/stats/swpout_fallback:1951123 hugepages-256kB/stats/swpout:2326 hugepages-256kB/stats/swpout_fallback:170165 hugepages-128kB/stats/swpout:17925 hugepages-128kB/stats/swpout_fallback:1309757 This patch (of 9): Previously, the swap cluster used a cluster index as a pointer to construct a custom single link list type "swap_cluster_list". The next cluster pointer is shared with the cluster->count. It prevents puting the non free cluster into a list. Change the cluster to use the standard double link list instead. This allows tracing the nonfull cluster in the follow up patch. That way, it is faster to get to the nonfull cluster of that order. Remove the cluster getter/setter for accessing the cluster struct member. The list operation is protected by the swap_info_struct->lock. Change cluster code to use "struct swap_cluster_info *" to reference the cluster rather than by using index. That is more consistent with the list manipulation. It avoids the repeat adding index to the cluser_info. The code is easier to understand. Remove the cluster next pointer is NULL flag, the double link list can handle the empty list pretty well. The "swap_cluster_info" struct is two pointer bigger, because 512 swap entries share one swap_cluster_info struct, it has very little impact on the average memory usage per swap entry. For 1TB swapfile, the swap cluster data structure increases from 8MB to 24MB. Other than the list conversion, there is no real function change in this patch. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-1-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-31 06:49:13 +00:00
ci->flags = CLUSTER_FLAG_FREE;
list_add_tail(&ci->list, &si->free_clusters);
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
}
}
return cluster_info;
err_free:
kvfree(cluster_info);
err:
return ERR_PTR(err);
}
SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
{
struct swap_info_struct *si;
struct filename *name;
struct file *swap_file = NULL;
struct address_space *mapping;
struct dentry *dentry;
int prio;
int error;
union swap_header *swap_header;
int nr_extents;
sector_t span;
unsigned long maxpages;
unsigned char *swap_map = NULL;
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
unsigned long *zeromap = NULL;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
struct swap_cluster_info *cluster_info = NULL;
struct folio *folio = NULL;
struct inode *inode = NULL;
bool inced_nr_rotate_swap = false;
if (swap_flags & ~SWAP_FLAGS_VALID)
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
if (!swap_avail_heads)
return -ENOMEM;
si = alloc_swap_info();
if (IS_ERR(si))
return PTR_ERR(si);
INIT_WORK(&si->discard_work, swap_discard_work);
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:30 +00:00
name = getname(specialfile);
if (IS_ERR(name)) {
error = PTR_ERR(name);
name = NULL;
goto bad_swap;
}
swap_file = file_open_name(name, O_RDWR | O_LARGEFILE | O_EXCL, 0);
if (IS_ERR(swap_file)) {
error = PTR_ERR(swap_file);
swap_file = NULL;
goto bad_swap;
}
si->swap_file = swap_file;
mapping = swap_file->f_mapping;
dentry = swap_file->f_path.dentry;
inode = mapping->host;
error = claim_swapfile(si, inode);
if (unlikely(error))
goto bad_swap;
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
inode_lock(inode);
if (d_unlinked(dentry) || cant_mount(dentry)) {
error = -ENOENT;
goto bad_swap_unlock_inode;
}
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
if (IS_SWAPFILE(inode)) {
error = -EBUSY;
goto bad_swap_unlock_inode;
}
/*
* Read the swap header.
*/
if (!mapping->a_ops->read_folio) {
error = -EINVAL;
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
goto bad_swap_unlock_inode;
}
folio = read_mapping_folio(mapping, 0, swap_file);
if (IS_ERR(folio)) {
error = PTR_ERR(folio);
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
goto bad_swap_unlock_inode;
}
swap_header = kmap_local_folio(folio, 0);
maxpages = read_swap_header(si, swap_header, inode);
if (unlikely(!maxpages)) {
error = -EINVAL;
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
goto bad_swap_unlock_inode;
}
/* OK, set up the swap map and apply the bad block list */
swap_map = vzalloc(maxpages);
if (!swap_map) {
error = -ENOMEM;
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
goto bad_swap_unlock_inode;
}
mm: support anonymous stable page During developemnt for zram-swap asynchronous writeback, I found strange corruption of compressed page, resulting in: Modules linked in: zram(E) CPU: 3 PID: 1520 Comm: zramd-1 Tainted: G E 4.8.0-mm1-00320-ge0d4894c9c38-dirty #3274 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff88007620b840 task.stack: ffff880078090000 RIP: set_freeobj.part.43+0x1c/0x1f RSP: 0018:ffff880078093ca8 EFLAGS: 00010246 RAX: 0000000000000018 RBX: ffff880076798d88 RCX: ffffffff81c408c8 RDX: 0000000000000018 RSI: 0000000000000000 RDI: 0000000000000246 RBP: ffff880078093cb0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88005bc43030 R11: 0000000000001df3 R12: ffff880076798d88 R13: 000000000005bc43 R14: ffff88007819d1b8 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88007e380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc934048f20 CR3: 0000000077b01000 CR4: 00000000000406e0 Call Trace: obj_malloc+0x22b/0x260 zs_malloc+0x1e4/0x580 zram_bvec_rw+0x4cd/0x830 [zram] page_requests_rw+0x9c/0x130 [zram] zram_thread+0xe6/0x173 [zram] kthread+0xca/0xe0 ret_from_fork+0x25/0x30 With investigation, it reveals currently stable page doesn't support anonymous page. IOW, reuse_swap_page can reuse the page without waiting writeback completion so it can overwrite page zram is compressing. Unfortunately, zram has used per-cpu stream feature from v4.7. It aims for increasing cache hit ratio of scratch buffer for compressing. Downside of that approach is that zram should ask memory space for compressed page in per-cpu context which requires stricted gfp flag which could be failed. If so, it retries to allocate memory space out of per-cpu context so it could get memory this time and compress the data again, copies it to the memory space. In this scenario, zram assumes the data should never be changed but it is not true unless stable page supports. So, If the data is changed under us, zram can make buffer overrun because second compression size could be bigger than one we got in previous trial and blindly, copy bigger size object to smaller buffer which is buffer overrun. The overrun breaks zsmalloc free object chaining so system goes crash like above. I think below is same problem. https://bugzilla.suse.com/show_bug.cgi?id=997574 Unfortunately, reuse_swap_page should be atomic so that we cannot wait on writeback in there so the approach in this patch is simply return false if we found it needs stable page. Although it increases memory footprint temporarily, it happens rarely and it should be reclaimed easily althoug it happened. Also, It would be better than waiting of IO completion, which is critial path for application latency. Fixes: da9556a2367c ("zram: user per-cpu compression streams") Link: http://lkml.kernel.org/r/20161120233015.GA14113@bbox Link: http://lkml.kernel.org/r/1482366980-3782-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Hyeoncheol Lee <cheol.lee@lge.com> Cc: <yjay.kim@lge.com> Cc: Sangseok Lee <sangseok.lee@lge.com> Cc: <stable@vger.kernel.org> [4.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-11 00:58:15 +00:00
error = swap_cgroup_swapon(si->type, maxpages);
if (error)
goto bad_swap_unlock_inode;
nr_extents = setup_swap_map_and_extents(si, swap_header, swap_map,
maxpages, &span);
if (unlikely(nr_extents < 0)) {
error = nr_extents;
goto bad_swap_unlock_inode;
}
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
/*
* Use kvmalloc_array instead of bitmap_zalloc as the allocation order might
* be above MAX_PAGE_ORDER incase of a large swap file.
*/
zeromap = kvmalloc_array(BITS_TO_LONGS(maxpages), sizeof(long),
GFP_KERNEL | __GFP_ZERO);
if (!zeromap) {
error = -ENOMEM;
goto bad_swap_unlock_inode;
}
if (si->bdev && bdev_stable_writes(si->bdev))
si->flags |= SWP_STABLE_WRITES;
mm: support anonymous stable page During developemnt for zram-swap asynchronous writeback, I found strange corruption of compressed page, resulting in: Modules linked in: zram(E) CPU: 3 PID: 1520 Comm: zramd-1 Tainted: G E 4.8.0-mm1-00320-ge0d4894c9c38-dirty #3274 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff88007620b840 task.stack: ffff880078090000 RIP: set_freeobj.part.43+0x1c/0x1f RSP: 0018:ffff880078093ca8 EFLAGS: 00010246 RAX: 0000000000000018 RBX: ffff880076798d88 RCX: ffffffff81c408c8 RDX: 0000000000000018 RSI: 0000000000000000 RDI: 0000000000000246 RBP: ffff880078093cb0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88005bc43030 R11: 0000000000001df3 R12: ffff880076798d88 R13: 000000000005bc43 R14: ffff88007819d1b8 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88007e380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc934048f20 CR3: 0000000077b01000 CR4: 00000000000406e0 Call Trace: obj_malloc+0x22b/0x260 zs_malloc+0x1e4/0x580 zram_bvec_rw+0x4cd/0x830 [zram] page_requests_rw+0x9c/0x130 [zram] zram_thread+0xe6/0x173 [zram] kthread+0xca/0xe0 ret_from_fork+0x25/0x30 With investigation, it reveals currently stable page doesn't support anonymous page. IOW, reuse_swap_page can reuse the page without waiting writeback completion so it can overwrite page zram is compressing. Unfortunately, zram has used per-cpu stream feature from v4.7. It aims for increasing cache hit ratio of scratch buffer for compressing. Downside of that approach is that zram should ask memory space for compressed page in per-cpu context which requires stricted gfp flag which could be failed. If so, it retries to allocate memory space out of per-cpu context so it could get memory this time and compress the data again, copies it to the memory space. In this scenario, zram assumes the data should never be changed but it is not true unless stable page supports. So, If the data is changed under us, zram can make buffer overrun because second compression size could be bigger than one we got in previous trial and blindly, copy bigger size object to smaller buffer which is buffer overrun. The overrun breaks zsmalloc free object chaining so system goes crash like above. I think below is same problem. https://bugzilla.suse.com/show_bug.cgi?id=997574 Unfortunately, reuse_swap_page should be atomic so that we cannot wait on writeback in there so the approach in this patch is simply return false if we found it needs stable page. Although it increases memory footprint temporarily, it happens rarely and it should be reclaimed easily althoug it happened. Also, It would be better than waiting of IO completion, which is critial path for application latency. Fixes: da9556a2367c ("zram: user per-cpu compression streams") Link: http://lkml.kernel.org/r/20161120233015.GA14113@bbox Link: http://lkml.kernel.org/r/1482366980-3782-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Hyeoncheol Lee <cheol.lee@lge.com> Cc: <yjay.kim@lge.com> Cc: Sangseok Lee <sangseok.lee@lge.com> Cc: <stable@vger.kernel.org> [4.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-11 00:58:15 +00:00
if (si->bdev && bdev_synchronous(si->bdev))
si->flags |= SWP_SYNCHRONOUS_IO;
if (si->bdev && bdev_nonrot(si->bdev)) {
si->flags |= SWP_SOLIDSTATE;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
cluster_info = setup_clusters(si, swap_header, maxpages);
if (IS_ERR(cluster_info)) {
error = PTR_ERR(cluster_info);
cluster_info = NULL;
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
goto bad_swap_unlock_inode;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
}
} else {
atomic_inc(&nr_rotate_swap);
inced_nr_rotate_swap = true;
}
if ((swap_flags & SWAP_FLAG_DISCARD) &&
si->bdev && bdev_max_discard_sectors(si->bdev)) {
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
/*
* When discard is enabled for swap with no particular
* policy flagged, we set all swap discard flags here in
* order to sustain backward compatibility with older
* swapon(8) releases.
*/
si->flags |= (SWP_DISCARDABLE | SWP_AREA_DISCARD |
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
SWP_PAGE_DISCARD);
swap: discard while swapping only if SWAP_FLAG_DISCARD_PAGES Considering the use cases where the swap device supports discard: a) and can do it quickly; b) but it's slow to do in small granularities (or concurrent with other I/O); c) but the implementation is so horrendous that you don't even want to send one down; And assuming that the sysadmin considers it useful to send the discards down at all, we would (probably) want the following solutions: i. do the fine-grained discards for freed swap pages, if device is capable of doing so optimally; ii. do single-time (batched) swap area discards, either at swapon or via something like fstrim (not implemented yet); iii. allow doing both single-time and fine-grained discards; or iv. turn it off completely (default behavior) As implemented today, one can only enable/disable discards for swap, but one cannot select, for instance, solution (ii) on a swap device like (b) even though the single-time discard is regarded to be interesting, or necessary to the workload because it would imply (1), and the device is not capable of performing it optimally. This patch addresses the scenario depicted above by introducing a way to ensure the (probably) wanted solutions (i, ii, iii and iv) can be flexibly flagged through swapon(8) to allow a sysadmin to select the best suitable swap discard policy accordingly to system constraints. This patch introduces SWAP_FLAG_DISCARD_PAGES and SWAP_FLAG_DISCARD_ONCE new flags to allow more flexibe swap discard policies being flagged through swapon(8). The default behavior is to keep both single-time, or batched, area discards (SWAP_FLAG_DISCARD_ONCE) and fine-grained discards for page-clusters (SWAP_FLAG_DISCARD_PAGES) enabled, in order to keep consistentcy with older kernel behavior, as well as maintain compatibility with older swapon(8). However, through the new introduced flags the best suitable discard policy can be selected accordingly to any given swap device constraint. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:46 +00:00
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
/*
* By flagging sys_swapon, a sysadmin can tell us to
* either do single-time area discards only, or to just
* perform discards for released swap page-clusters.
* Now it's time to adjust the p->flags accordingly.
*/
if (swap_flags & SWAP_FLAG_DISCARD_ONCE)
si->flags &= ~SWP_PAGE_DISCARD;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
else if (swap_flags & SWAP_FLAG_DISCARD_PAGES)
si->flags &= ~SWP_AREA_DISCARD;
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
/* issue a swapon-time discard if it's still required */
if (si->flags & SWP_AREA_DISCARD) {
int err = discard_swap(si);
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:20:28 +00:00
if (unlikely(err))
pr_err("swapon: discard_swap(%p): %d\n",
si, err);
swap: discard while swapping only if SWAP_FLAG_DISCARD_PAGES Considering the use cases where the swap device supports discard: a) and can do it quickly; b) but it's slow to do in small granularities (or concurrent with other I/O); c) but the implementation is so horrendous that you don't even want to send one down; And assuming that the sysadmin considers it useful to send the discards down at all, we would (probably) want the following solutions: i. do the fine-grained discards for freed swap pages, if device is capable of doing so optimally; ii. do single-time (batched) swap area discards, either at swapon or via something like fstrim (not implemented yet); iii. allow doing both single-time and fine-grained discards; or iv. turn it off completely (default behavior) As implemented today, one can only enable/disable discards for swap, but one cannot select, for instance, solution (ii) on a swap device like (b) even though the single-time discard is regarded to be interesting, or necessary to the workload because it would imply (1), and the device is not capable of performing it optimally. This patch addresses the scenario depicted above by introducing a way to ensure the (probably) wanted solutions (i, ii, iii and iv) can be flexibly flagged through swapon(8) to allow a sysadmin to select the best suitable swap discard policy accordingly to system constraints. This patch introduces SWAP_FLAG_DISCARD_PAGES and SWAP_FLAG_DISCARD_ONCE new flags to allow more flexibe swap discard policies being flagged through swapon(8). The default behavior is to keep both single-time, or batched, area discards (SWAP_FLAG_DISCARD_ONCE) and fine-grained discards for page-clusters (SWAP_FLAG_DISCARD_PAGES) enabled, in order to keep consistentcy with older kernel behavior, as well as maintain compatibility with older swapon(8). However, through the new introduced flags the best suitable discard policy can be selected accordingly to any given swap device constraint. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:46 +00:00
}
}
error = init_swap_address_space(si->type, maxpages);
mm/swap: split swap cache into 64MB trunks The patch is to improve the scalability of the swap out/in via using fine grained locks for the swap cache. In current kernel, one address space will be used for each swap device. And in the common configuration, the number of the swap device is very small (one is typical). This causes the heavy lock contention on the radix tree of the address space if multiple tasks swap out/in concurrently. But in fact, there is no dependency between pages in the swap cache. So that, we can split the one shared address space for each swap device into several address spaces to reduce the lock contention. In the patch, the shared address space is split into 64MB trunks. 64MB is chosen to balance the memory space usage and effect of lock contention reduction. The size of struct address_space on x86_64 architecture is 408B, so with the patch, 6528B more memory will be used for every 1GB swap space on x86_64 architecture. One address space is still shared for the swap entries in the same 64M trunks. To avoid lock contention for the first round of swap space allocation, the order of the swap clusters in the initial free clusters list is changed. The swap space distance between the consecutive swap clusters in the free cluster list is at least 64M. After the first round of allocation, the swap clusters are expected to be freed randomly, so the lock contention should be reduced effectively. Link: http://lkml.kernel.org/r/735bab895e64c930581ffb0a05b661e01da82bc5.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:26 +00:00
if (error)
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
goto bad_swap_unlock_inode;
mm/swap: split swap cache into 64MB trunks The patch is to improve the scalability of the swap out/in via using fine grained locks for the swap cache. In current kernel, one address space will be used for each swap device. And in the common configuration, the number of the swap device is very small (one is typical). This causes the heavy lock contention on the radix tree of the address space if multiple tasks swap out/in concurrently. But in fact, there is no dependency between pages in the swap cache. So that, we can split the one shared address space for each swap device into several address spaces to reduce the lock contention. In the patch, the shared address space is split into 64MB trunks. 64MB is chosen to balance the memory space usage and effect of lock contention reduction. The size of struct address_space on x86_64 architecture is 408B, so with the patch, 6528B more memory will be used for every 1GB swap space on x86_64 architecture. One address space is still shared for the swap entries in the same 64M trunks. To avoid lock contention for the first round of swap space allocation, the order of the swap clusters in the initial free clusters list is changed. The swap space distance between the consecutive swap clusters in the free cluster list is at least 64M. After the first round of allocation, the swap clusters are expected to be freed randomly, so the lock contention should be reduced effectively. Link: http://lkml.kernel.org/r/735bab895e64c930581ffb0a05b661e01da82bc5.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:26 +00:00
error = zswap_swapon(si->type, maxpages);
mm/zswap: make sure each swapfile always have zswap rb-tree Patch series "mm/zswap: optimize the scalability of zswap rb-tree", v2. When testing the zswap performance by using kernel build -j32 in a tmpfs directory, I found the scalability of zswap rb-tree is not good, which is protected by the only spinlock. That would cause heavy lock contention if multiple tasks zswap_store/load concurrently. So a simple solution is to split the only one zswap rb-tree into multiple rb-trees, each corresponds to SWAP_ADDRESS_SPACE_PAGES (64M). This idea is from the commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"). Although this method can't solve the spinlock contention completely, it can mitigate much of that contention. Below is the results of kernel build in tmpfs with zswap shrinker enabled: linux-next zswap-lock-optimize real 1m9.181s 1m3.820s user 17m44.036s 17m40.100s sys 7m37.297s 4m54.622s So there are clearly improvements. And it's complementary with the ongoing zswap xarray conversion by Chris. Anyway, I think we can also merge this first, it's complementary IMHO. So I just refresh and resend this for further discussion. This patch (of 2): Not all zswap interfaces can handle the absence of the zswap rb-tree, actually only zswap_store() has handled it for now. To make things simple, we make sure each swapfile always have the zswap rb-tree prepared before being enabled and used. The preparation is unlikely to fail in practice, this patch just make it explicit. Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-0-b5cc55479090@bytedance.com Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-1-b5cc55479090@bytedance.com Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Yosry Ahmed <yosryahmed@google.com> Cc: Chris Li <chriscli@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-19 11:22:22 +00:00
if (error)
goto free_swap_address_space;
/*
* Flush any pending IO and dirty mappings before we start using this
* swap device.
*/
inode->i_flags |= S_SWAPFILE;
error = inode_drain_writes(inode);
if (error) {
inode->i_flags &= ~S_SWAPFILE;
mm/zswap: make sure each swapfile always have zswap rb-tree Patch series "mm/zswap: optimize the scalability of zswap rb-tree", v2. When testing the zswap performance by using kernel build -j32 in a tmpfs directory, I found the scalability of zswap rb-tree is not good, which is protected by the only spinlock. That would cause heavy lock contention if multiple tasks zswap_store/load concurrently. So a simple solution is to split the only one zswap rb-tree into multiple rb-trees, each corresponds to SWAP_ADDRESS_SPACE_PAGES (64M). This idea is from the commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"). Although this method can't solve the spinlock contention completely, it can mitigate much of that contention. Below is the results of kernel build in tmpfs with zswap shrinker enabled: linux-next zswap-lock-optimize real 1m9.181s 1m3.820s user 17m44.036s 17m40.100s sys 7m37.297s 4m54.622s So there are clearly improvements. And it's complementary with the ongoing zswap xarray conversion by Chris. Anyway, I think we can also merge this first, it's complementary IMHO. So I just refresh and resend this for further discussion. This patch (of 2): Not all zswap interfaces can handle the absence of the zswap rb-tree, actually only zswap_store() has handled it for now. To make things simple, we make sure each swapfile always have the zswap rb-tree prepared before being enabled and used. The preparation is unlikely to fail in practice, this patch just make it explicit. Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-0-b5cc55479090@bytedance.com Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-1-b5cc55479090@bytedance.com Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Yosry Ahmed <yosryahmed@google.com> Cc: Chris Li <chriscli@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-19 11:22:22 +00:00
goto free_swap_zswap;
}
mutex_lock(&swapon_mutex);
prio = -1;
if (swap_flags & SWAP_FLAG_PREFER)
prio =
(swap_flags & SWAP_FLAG_PRIO_MASK) >> SWAP_FLAG_PRIO_SHIFT;
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
enable_swap_info(si, prio, swap_map, cluster_info, zeromap);
pr_info("Adding %uk swap on %s. Priority:%d extents:%d across:%lluk %s%s%s%s\n",
K(si->pages), name->name, si->prio, nr_extents,
K((unsigned long long)span),
(si->flags & SWP_SOLIDSTATE) ? "SS" : "",
(si->flags & SWP_DISCARDABLE) ? "D" : "",
(si->flags & SWP_AREA_DISCARD) ? "s" : "",
(si->flags & SWP_PAGE_DISCARD) ? "c" : "");
mutex_unlock(&swapon_mutex);
atomic_inc(&proc_poll_event);
wake_up_interruptible(&proc_poll_wait);
error = 0;
goto out;
mm/zswap: make sure each swapfile always have zswap rb-tree Patch series "mm/zswap: optimize the scalability of zswap rb-tree", v2. When testing the zswap performance by using kernel build -j32 in a tmpfs directory, I found the scalability of zswap rb-tree is not good, which is protected by the only spinlock. That would cause heavy lock contention if multiple tasks zswap_store/load concurrently. So a simple solution is to split the only one zswap rb-tree into multiple rb-trees, each corresponds to SWAP_ADDRESS_SPACE_PAGES (64M). This idea is from the commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"). Although this method can't solve the spinlock contention completely, it can mitigate much of that contention. Below is the results of kernel build in tmpfs with zswap shrinker enabled: linux-next zswap-lock-optimize real 1m9.181s 1m3.820s user 17m44.036s 17m40.100s sys 7m37.297s 4m54.622s So there are clearly improvements. And it's complementary with the ongoing zswap xarray conversion by Chris. Anyway, I think we can also merge this first, it's complementary IMHO. So I just refresh and resend this for further discussion. This patch (of 2): Not all zswap interfaces can handle the absence of the zswap rb-tree, actually only zswap_store() has handled it for now. To make things simple, we make sure each swapfile always have the zswap rb-tree prepared before being enabled and used. The preparation is unlikely to fail in practice, this patch just make it explicit. Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-0-b5cc55479090@bytedance.com Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-1-b5cc55479090@bytedance.com Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Yosry Ahmed <yosryahmed@google.com> Cc: Chris Li <chriscli@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-19 11:22:22 +00:00
free_swap_zswap:
zswap_swapoff(si->type);
free_swap_address_space:
exit_swap_address_space(si->type);
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
bad_swap_unlock_inode:
inode_unlock(inode);
bad_swap:
free_percpu(si->percpu_cluster);
si->percpu_cluster = NULL;
free_percpu(si->cluster_next_cpu);
si->cluster_next_cpu = NULL;
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
inode = NULL;
destroy_swap_extents(si);
swap_cgroup_swapoff(si->type);
spin_lock(&swap_lock);
si->swap_file = NULL;
si->flags = 0;
spin_unlock(&swap_lock);
vfree(swap_map);
mm: store zero pages to be swapped out in a bitmap Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-23 19:04:39 +00:00
kvfree(zeromap);
kvfree(cluster_info);
if (inced_nr_rotate_swap)
atomic_dec(&nr_rotate_swap);
mm/swapfile.c: move inode_lock out of claim_swapfile claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29 02:17:15 +00:00
if (swap_file)
filp_close(swap_file, NULL);
out:
if (!IS_ERR_OR_NULL(folio))
folio_release_kmap(folio, swap_header);
if (name)
putname(name);
if (inode)
inode_unlock(inode);
if (!error)
enable_swap_slots_cache();
return error;
}
void si_swapinfo(struct sysinfo *val)
{
unsigned int type;
unsigned long nr_to_be_unused = 0;
spin_lock(&swap_lock);
for (type = 0; type < nr_swapfiles; type++) {
struct swap_info_struct *si = swap_info[type];
if ((si->flags & SWP_USED) && !(si->flags & SWP_WRITEOK))
nr_to_be_unused += READ_ONCE(si->inuse_pages);
}
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
val->freeswap = atomic_long_read(&nr_swap_pages) + nr_to_be_unused;
val->totalswap = total_swap_pages + nr_to_be_unused;
spin_unlock(&swap_lock);
}
/*
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
* Verify that nr swap entries are valid and increment their swap map counts.
*
* Returns error code in following case.
* - success -> 0
* - swp_entry is invalid -> EINVAL
* - swp_entry is migration entry -> EINVAL
* - swap-cache reference is requested but there is already one. -> EEXIST
* - swap-cache reference is requested but the entry is not used. -> ENOENT
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
* - swap-mapped reference requested but needs continued swap count. -> ENOMEM
*/
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
static int __swap_duplicate(swp_entry_t entry, unsigned char usage, int nr)
{
struct swap_info_struct *si;
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
struct swap_cluster_info *ci;
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
unsigned long offset;
unsigned char count;
unsigned char has_cache;
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
int err, i;
si = swp_swap_info(entry);
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
offset = swp_offset(entry);
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
VM_WARN_ON(nr > SWAPFILE_CLUSTER - offset % SWAPFILE_CLUSTER);
VM_WARN_ON(usage == 1 && nr > 1);
ci = lock_cluster_or_swap_info(si, offset);
err = 0;
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
for (i = 0; i < nr; i++) {
count = si->swap_map[offset + i];
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
/*
* swapin_readahead() doesn't check if a swap entry is valid, so the
* swap entry could be SWAP_MAP_BAD. Check here with lock held.
*/
if (unlikely(swap_count(count) == SWAP_MAP_BAD)) {
err = -ENOENT;
goto unlock_out;
}
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
has_cache = count & SWAP_HAS_CACHE;
count &= ~SWAP_HAS_CACHE;
if (!count && !has_cache) {
err = -ENOENT;
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
} else if (usage == SWAP_HAS_CACHE) {
if (has_cache)
err = -EEXIST;
} else if ((count & ~COUNT_CONTINUED) > SWAP_MAP_MAX) {
err = -EINVAL;
}
if (err)
goto unlock_out;
}
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
for (i = 0; i < nr; i++) {
count = si->swap_map[offset + i];
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
has_cache = count & SWAP_HAS_CACHE;
count &= ~SWAP_HAS_CACHE;
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
if (usage == SWAP_HAS_CACHE)
has_cache = SWAP_HAS_CACHE;
else if ((count & ~COUNT_CONTINUED) < SWAP_MAP_MAX)
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
count += usage;
else if (swap_count_continued(si, offset + i, count))
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
count = COUNT_CONTINUED;
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
else {
/*
* Don't need to rollback changes, because if
* usage == 1, there must be nr == 1.
*/
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
err = -ENOMEM;
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
goto unlock_out;
}
WRITE_ONCE(si->swap_map[offset + i], count | has_cache);
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
}
unlock_out:
unlock_cluster_or_swap_info(si, ci);
return err;
}
/*
* Help swapoff by noting that swap entry belongs to shmem/tmpfs
* (in which case its reference count is never incremented).
*/
mm: swap: extend swap_shmem_alloc() to support batch SWAP_MAP_SHMEM flag setting Patch series "support large folio swap-out and swap-in for shmem", v5. Shmem will support large folio allocation [1] [2] to get a better performance, however, the memory reclaim still splits the precious large folios when trying to swap-out shmem, which may lead to the memory fragmentation issue and can not take advantage of the large folio for shmeme. Moreover, the swap code already supports for swapping out large folio without split, and large folio swap-in[3] series is queued into mm-unstable branch. Hence this patch set also supports the large folio swap-out and swap-in for shmem. This patch (of 9): To support shmem large folio swap operations, add a new parameter to swap_shmem_alloc() that allows batch SWAP_MAP_SHMEM flag setting for shmem swap entries. While we are at it, using folio_nr_pages() to get the number of pages of the folio as a preparation. Link: https://lkml.kernel.org/r/cover.1723434324.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/99f64115d04b285e009580eb177352c57119ffd0.1723434324.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 07:42:02 +00:00
void swap_shmem_alloc(swp_entry_t entry, int nr)
{
mm: swap: extend swap_shmem_alloc() to support batch SWAP_MAP_SHMEM flag setting Patch series "support large folio swap-out and swap-in for shmem", v5. Shmem will support large folio allocation [1] [2] to get a better performance, however, the memory reclaim still splits the precious large folios when trying to swap-out shmem, which may lead to the memory fragmentation issue and can not take advantage of the large folio for shmeme. Moreover, the swap code already supports for swapping out large folio without split, and large folio swap-in[3] series is queued into mm-unstable branch. Hence this patch set also supports the large folio swap-out and swap-in for shmem. This patch (of 9): To support shmem large folio swap operations, add a new parameter to swap_shmem_alloc() that allows batch SWAP_MAP_SHMEM flag setting for shmem swap entries. While we are at it, using folio_nr_pages() to get the number of pages of the folio as a preparation. Link: https://lkml.kernel.org/r/cover.1723434324.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/99f64115d04b285e009580eb177352c57119ffd0.1723434324.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 07:42:02 +00:00
__swap_duplicate(entry, SWAP_MAP_SHMEM, nr);
}
/*
* Increase reference count of swap entry by 1.
* Returns 0 for success, or -ENOMEM if a swap_count_continuation is required
* but could not be atomically allocated. Returns 0, just as if it succeeded,
* if __swap_duplicate() fails for another reason (-EINVAL or -ENOENT), which
* might occur if a page table entry has got corrupted.
*/
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
int swap_duplicate(swp_entry_t entry)
{
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
int err = 0;
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
while (!err && __swap_duplicate(entry, 1, 1) == -ENOMEM)
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
err = add_swap_count_continuation(entry, GFP_ATOMIC);
return err;
}
/*
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
* @entry: first swap entry from which we allocate nr swap cache.
*
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
* Called when allocating swap cache for existing swap entries,
* This can return error codes. Returns 0 at success.
* -EEXIST means there is a swap cache.
* Note: return code is different from swap_duplicate().
*/
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
int swapcache_prepare(swp_entry_t entry, int nr)
{
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
return __swap_duplicate(entry, SWAP_HAS_CACHE, nr);
}
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
void swapcache_clear(struct swap_info_struct *si, swp_entry_t entry, int nr)
mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" <ying.huang@intel.com> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-06 18:25:59 +00:00
{
unsigned long offset = swp_offset(entry);
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-30 07:13:39 +00:00
cluster_swap_free_nr(si, offset, nr, SWAP_HAS_CACHE);
mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" <ying.huang@intel.com> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-06 18:25:59 +00:00
}
struct swap_info_struct *swp_swap_info(swp_entry_t entry)
{
mm, swap: bounds check swap_info array accesses to avoid NULL derefs Dan Carpenter reports a potential NULL dereference in get_swap_page_of_type: Smatch complains that the NULL checks on "si" aren't consistent. This seems like a real bug because we have not ensured that the type is valid and so "si" can be NULL. Add the missing check for NULL, taking care to use a read barrier to ensure CPU1 observes CPU0's updates in the correct order: CPU0 CPU1 alloc_swap_info() if (type >= nr_swapfiles) swap_info[type] = p /* handle invalid entry */ smp_wmb() smp_rmb() ++nr_swapfiles p = swap_info[type] Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before CPU0's write to swap_info[type] and read NULL from swap_info[type]. Ying Huang noticed other places in swapfile.c don't order these reads properly. Introduce swap_type_to_swap_info to encourage correct usage. Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model (see tools/memory-model/Documentation/explanation.txt). This ordering need not be enforced in places where swap_lock is held (e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles and the swap_info array. Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:48:19 +00:00
return swap_type_to_swap_info(swp_type(entry));
}
/*
mm/util: Add folio_mapping() and folio_file_mapping() These are the folio equivalent of page_mapping() and page_file_mapping(). Add an out-of-line page_mapping() wrapper around folio_mapping() in order to prevent the page_folio() call from bloating every caller of page_mapping(). Adjust page_file_mapping() and page_mapping_file() to use folios internally. Rename __page_file_mapping() to swapcache_mapping() and change it to take a folio. This ends up saving 122 bytes of text overall. folio_mapping() is 45 bytes shorter than page_mapping() was, but the new page_mapping() wrapper is 30 bytes. The major reduction is a few bytes less in dozens of nfs functions (which call page_file_mapping()). Most of these appear to be a slight change in gcc's register allocation decisions, which allow: 48 8b 56 08 mov 0x8(%rsi),%rdx 48 8d 42 ff lea -0x1(%rdx),%rax 83 e2 01 and $0x1,%edx 48 0f 44 c6 cmove %rsi,%rax to become: 48 8b 46 08 mov 0x8(%rsi),%rax 48 8d 78 ff lea -0x1(%rax),%rdi a8 01 test $0x1,%al 48 0f 44 fe cmove %rsi,%rdi for a reduction of a single byte. Once the NFS client is converted to use folios, this entire sequence will disappear. Also add folio_mapping() documentation. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com>
2020-12-10 15:55:05 +00:00
* out-of-line methods to avoid include hell.
*/
mm/util: Add folio_mapping() and folio_file_mapping() These are the folio equivalent of page_mapping() and page_file_mapping(). Add an out-of-line page_mapping() wrapper around folio_mapping() in order to prevent the page_folio() call from bloating every caller of page_mapping(). Adjust page_file_mapping() and page_mapping_file() to use folios internally. Rename __page_file_mapping() to swapcache_mapping() and change it to take a folio. This ends up saving 122 bytes of text overall. folio_mapping() is 45 bytes shorter than page_mapping() was, but the new page_mapping() wrapper is 30 bytes. The major reduction is a few bytes less in dozens of nfs functions (which call page_file_mapping()). Most of these appear to be a slight change in gcc's register allocation decisions, which allow: 48 8b 56 08 mov 0x8(%rsi),%rdx 48 8d 42 ff lea -0x1(%rdx),%rax 83 e2 01 and $0x1,%edx 48 0f 44 c6 cmove %rsi,%rax to become: 48 8b 46 08 mov 0x8(%rsi),%rax 48 8d 78 ff lea -0x1(%rax),%rdi a8 01 test $0x1,%al 48 0f 44 fe cmove %rsi,%rdi for a reduction of a single byte. Once the NFS client is converted to use folios, this entire sequence will disappear. Also add folio_mapping() documentation. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com>
2020-12-10 15:55:05 +00:00
struct address_space *swapcache_mapping(struct folio *folio)
{
return swp_swap_info(folio->swap)->swap_file->f_mapping;
}
mm/util: Add folio_mapping() and folio_file_mapping() These are the folio equivalent of page_mapping() and page_file_mapping(). Add an out-of-line page_mapping() wrapper around folio_mapping() in order to prevent the page_folio() call from bloating every caller of page_mapping(). Adjust page_file_mapping() and page_mapping_file() to use folios internally. Rename __page_file_mapping() to swapcache_mapping() and change it to take a folio. This ends up saving 122 bytes of text overall. folio_mapping() is 45 bytes shorter than page_mapping() was, but the new page_mapping() wrapper is 30 bytes. The major reduction is a few bytes less in dozens of nfs functions (which call page_file_mapping()). Most of these appear to be a slight change in gcc's register allocation decisions, which allow: 48 8b 56 08 mov 0x8(%rsi),%rdx 48 8d 42 ff lea -0x1(%rdx),%rax 83 e2 01 and $0x1,%edx 48 0f 44 c6 cmove %rsi,%rax to become: 48 8b 46 08 mov 0x8(%rsi),%rax 48 8d 78 ff lea -0x1(%rax),%rdi a8 01 test $0x1,%al 48 0f 44 fe cmove %rsi,%rdi for a reduction of a single byte. Once the NFS client is converted to use folios, this entire sequence will disappear. Also add folio_mapping() documentation. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com>
2020-12-10 15:55:05 +00:00
EXPORT_SYMBOL_GPL(swapcache_mapping);
pgoff_t __folio_swap_cache_index(struct folio *folio)
{
mm/swap: reduce swap cache search space Currently we use one swap_address_space for every 64M chunk to reduce lock contention, this is like having a set of smaller swap files inside one swap device. But when doing swap cache look up or insert, we are still using the offset of the whole large swap device. This is OK for correctness, as the offset (key) is unique. But Xarray is specially optimized for small indexes, it creates the radix tree levels lazily to be just enough to fit the largest key stored in one Xarray. So we are wasting tree nodes unnecessarily. For 64M chunk it should only take at most 3 levels to contain everything. But if we are using the offset from the whole swap device, the offset (key) value will be way beyond 64M, and so will the tree level. Optimize this by using a new helper swap_cache_index to get a swap entry's unique offset in its own 64M swap_address_space. I see a ~1% performance gain in benchmark and actual workload with high memory pressure. Test with `time memhog 128G` inside a 8G memcg using 128G swap (ramdisk with SWP_SYNCHRONOUS_IO dropped, tested 3 times, results are stable. The test result is similar but the improvement is smaller if SWP_SYNCHRONOUS_IO is enabled, as swap out path can never skip swap cache): Before: 6.07user 250.74system 4:17.26elapsed 99%CPU (0avgtext+0avgdata 8373376maxresident)k 0inputs+0outputs (55major+33555018minor)pagefaults 0swaps After (1.8% faster): 6.08user 246.09system 4:12.58elapsed 99%CPU (0avgtext+0avgdata 8373248maxresident)k 0inputs+0outputs (54major+33555027minor)pagefaults 0swaps Similar result with MySQL and sysbench using swap: Before: 94055.61 qps After (0.8% faster): 94834.91 qps Radix tree slab usage is also very slightly lower. Link: https://lkml.kernel.org/r/20240521175854.96038-12-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-21 17:58:53 +00:00
return swap_cache_index(folio->swap);
}
EXPORT_SYMBOL_GPL(__folio_swap_cache_index);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
/*
* add_swap_count_continuation - called when a swap count is duplicated
* beyond SWAP_MAP_MAX, it allocates a new page and links that to the entry's
* page of the original vmalloc'ed swap_map, to hold the continuation count
* (for that entry and for its neighbouring PAGE_SIZE swap entries). Called
* again when count is duplicated beyond SWAP_MAP_MAX * SWAP_CONT_MAX, etc.
*
* These continuation pages are seldom referenced: the common paths all work
* on the original swap_map, only referring to a continuation page when the
* low "digit" of a count is incremented or decremented through SWAP_MAP_MAX.
*
* add_swap_count_continuation(, GFP_ATOMIC) can be called while holding
* page table locks; if it fails, add_swap_count_continuation(, GFP_KERNEL)
* can be called after dropping locks.
*/
int add_swap_count_continuation(swp_entry_t entry, gfp_t gfp_mask)
{
struct swap_info_struct *si;
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
struct swap_cluster_info *ci;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
struct page *head;
struct page *page;
struct page *list_page;
pgoff_t offset;
unsigned char count;
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
int ret = 0;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
/*
* When debugging, it's easier to use __GFP_ZERO here; but it's better
* for latency not to zero a page while GFP_ATOMIC and holding locks.
*/
page = alloc_page(gfp_mask | __GFP_HIGHMEM);
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
si = get_swap_device(entry);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
if (!si) {
/*
* An acceptable race has occurred since the failing
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
* __swap_duplicate(): the swap device may be swapoff
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
*/
goto outer;
}
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
spin_lock(&si->lock);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
offset = swp_offset(entry);
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
ci = lock_cluster(si, offset);
count = swap_count(si->swap_map[offset]);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
if ((count & ~COUNT_CONTINUED) != SWAP_MAP_MAX) {
/*
* The higher the swap count, the more likely it is that tasks
* will race to add swap count continuation: we need to avoid
* over-provisioning.
*/
goto out;
}
if (!page) {
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
ret = -ENOMEM;
goto out;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
head = vmalloc_to_page(si->swap_map + offset);
offset &= ~PAGE_MASK;
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
spin_lock(&si->cont_lock);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
/*
* Page allocation does not initialize the page's lru field,
* but it does always reset its private field.
*/
if (!page_private(head)) {
BUG_ON(count & COUNT_CONTINUED);
INIT_LIST_HEAD(&head->lru);
set_page_private(head, SWP_CONTINUED);
si->flags |= SWP_CONTINUED;
}
list_for_each_entry(list_page, &head->lru, lru) {
unsigned char *map;
/*
* If the previous map said no continuation, but we've found
* a continuation page, free our allocation and use this one.
*/
if (!(count & COUNT_CONTINUED))
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
goto out_unlock_cont;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
map = kmap_local_page(list_page) + offset;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
count = *map;
kunmap_local(map);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
/*
* If this continuation count now has some space in it,
* free our allocation and use this one.
*/
if ((count & ~COUNT_CONTINUED) != SWAP_CONT_MAX)
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
goto out_unlock_cont;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
list_add_tail(&page->lru, &head->lru);
page = NULL; /* now it's attached, don't free it */
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
out_unlock_cont:
spin_unlock(&si->cont_lock);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
out:
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
unlock_cluster(ci);
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:34:38 +00:00
spin_unlock(&si->lock);
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
put_swap_device(si);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
outer:
if (page)
__free_page(page);
mm, swap: fix race between swapoff and some swap operations When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 03:55:33 +00:00
return ret;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
/*
* swap_count_continued - when the original swap_map count is incremented
* from SWAP_MAP_MAX, check if there is already a continuation page to carry
* into, carry if so, or else fail until a new continuation page is allocated;
* when the original swap_map count is decremented from 0 with continuation,
* borrow from the continuation and report whether it still holds more.
mm/swap: add cluster lock This patch is to reduce the lock contention of swap_info_struct->lock via using a more fine grained lock in swap_cluster_info for some swap operations. swap_info_struct->lock is heavily contended if multiple processes reclaim pages simultaneously. Because there is only one lock for each swap device. While in common configuration, there is only one or several swap devices in the system. The lock protects almost all swap related operations. In fact, many swap operations only access one element of swap_info_struct->swap_map array. And there is no dependency between different elements of swap_info_struct->swap_map. So a fine grained lock can be used to allow parallel access to the different elements of swap_info_struct->swap_map. In this patch, a spinlock is added to swap_cluster_info to protect the elements of swap_info_struct->swap_map in the swap cluster and the fields of swap_cluster_info. This reduced locking contention for swap_info_struct->swap_map access greatly. Because of the added spinlock, the size of swap_cluster_info increases from 4 bytes to 8 bytes on the 64 bit and 32 bit system. This will use additional 4k RAM for every 1G swap space. Because the size of swap_cluster_info is much smaller than the size of the cache line (8 vs 64 on x86_64 architecture), there may be false cache line sharing between spinlocks in swap_cluster_info. To avoid the false sharing in the first round of the swap cluster allocation, the order of the swap clusters in the free clusters list is changed. So that, the swap_cluster_info sharing the same cache line will be placed as far as possible. After the first round of allocation, the order of the clusters in free clusters list is expected to be random. So the false sharing should be not serious. Compared with a previous implementation using bit_spin_lock, the sequential swap out throughput improved about 3.2%. Test was done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case created 32 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used. [ying.huang@intel.com: v5] Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com [minchan@kernel.org: initialize spinlock for swap_cluster_info] Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org [hughd@google.com: annotate nested locking for cluster lock] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22 23:45:22 +00:00
* Called while __swap_duplicate() or swap_entry_free() holds swap or cluster
* lock.
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
*/
static bool swap_count_continued(struct swap_info_struct *si,
pgoff_t offset, unsigned char count)
{
struct page *head;
struct page *page;
unsigned char *map;
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
bool ret;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
head = vmalloc_to_page(si->swap_map + offset);
if (page_private(head) != SWP_CONTINUED) {
BUG_ON(count & COUNT_CONTINUED);
return false; /* need to add count continuation */
}
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
spin_lock(&si->cont_lock);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
offset &= ~PAGE_MASK;
page = list_next_entry(head, lru);
map = kmap_local_page(page) + offset;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
if (count == SWAP_MAP_MAX) /* initial increment from swap_map */
goto init_map; /* jump over SWAP_CONT_MAX checks */
if (count == (SWAP_MAP_MAX | COUNT_CONTINUED)) { /* incrementing */
/*
* Think of how you add 1 to 999
*/
while (*map == (SWAP_CONT_MAX | COUNT_CONTINUED)) {
kunmap_local(map);
page = list_next_entry(page, lru);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
BUG_ON(page == head);
map = kmap_local_page(page) + offset;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
if (*map == SWAP_CONT_MAX) {
kunmap_local(map);
page = list_next_entry(page, lru);
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
if (page == head) {
ret = false; /* add count continuation */
goto out;
}
map = kmap_local_page(page) + offset;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
init_map: *map = 0; /* we didn't zero the page */
}
*map += 1;
kunmap_local(map);
while ((page = list_prev_entry(page, lru)) != head) {
map = kmap_local_page(page) + offset;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
*map = COUNT_CONTINUED;
kunmap_local(map);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
ret = true; /* incremented */
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
} else { /* decrementing */
/*
* Think of how you subtract 1 from 1000
*/
BUG_ON(count != COUNT_CONTINUED);
while (*map == COUNT_CONTINUED) {
kunmap_local(map);
page = list_next_entry(page, lru);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
BUG_ON(page == head);
map = kmap_local_page(page) + offset;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
BUG_ON(*map == 0);
*map -= 1;
if (*map == 0)
count = 0;
kunmap_local(map);
while ((page = list_prev_entry(page, lru)) != head) {
map = kmap_local_page(page) + offset;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
*map = SWAP_CONT_MAX | count;
count = COUNT_CONTINUED;
kunmap_local(map);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
ret = count == COUNT_CONTINUED;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
mm, swap: fix race between swap count continuation operations One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02 22:59:50 +00:00
out:
spin_unlock(&si->cont_lock);
return ret;
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
}
/*
* free_swap_count_continuations - swapoff free all the continuation pages
* appended to the swap_map, after swap_map is quiesced, before vfree'ing it.
*/
static void free_swap_count_continuations(struct swap_info_struct *si)
{
pgoff_t offset;
for (offset = 0; offset < si->max; offset += PAGE_SIZE) {
struct page *head;
head = vmalloc_to_page(si->swap_map + offset);
if (page_private(head)) {
struct page *page, *next;
list_for_each_entry_safe(page, next, &head->lru, lru) {
list_del(&page->lru);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:58:46 +00:00
__free_page(page);
}
}
}
}
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
#if defined(CONFIG_MEMCG) && defined(CONFIG_BLK_CGROUP)
void __folio_throttle_swaprate(struct folio *folio, gfp_t gfp)
{
struct swap_info_struct *si, *next;
int nid = folio_nid(folio);
if (!(gfp & __GFP_IO))
return;
if (!__has_usable_swap())
return;
if (!blk_cgroup_congested())
return;
/*
* We've already scheduled a throttle, avoid taking the global swap
* lock.
*/
if (current->throttle_disk)
return;
spin_lock(&swap_avail_lock);
plist_for_each_entry_safe(si, next, &swap_avail_heads[nid],
avail_lists[nid]) {
if (si->bdev) {
blkcg_schedule_throttle(si->bdev->bd_disk, true);
break;
}
}
spin_unlock(&swap_avail_lock);
}
#endif
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
static int __init swapfile_init(void)
{
int nid;
swap_avail_heads = kmalloc_array(nr_node_ids, sizeof(struct plist_head),
GFP_KERNEL);
if (!swap_avail_heads) {
pr_emerg("Not enough memory for swap heads, swap is disabled\n");
return -ENOMEM;
}
for_each_node(nid)
plist_head_init(&swap_avail_heads[nid]);
mm/swap: cache maximum swapfile size when init swap We used to have swapfile_maximum_size() fetching a maximum value of swapfile size per-arch. As the caller of max_swapfile_size() grows, this patch introduce a variable "swapfile_maximum_size" and cache the value of old max_swapfile_size(), so that we don't need to calculate the value every time. Caching the value in swapfile_init() is safe because when reaching the phase we should have initialized all the relevant information. Here the major arch to take care of is x86, which defines the max swapfile size based on L1TF mitigation. Here both X86_BUG_L1TF or l1tf_mitigation should have been setup properly when reaching swapfile_init(). As a reference, the code path looks like this for x86: - start_kernel - setup_arch - early_cpu_init - early_identify_cpu --> setup X86_BUG_L1TF - parse_early_param - l1tf_cmdline --> set l1tf_mitigation - check_bugs - l1tf_select_mitigation --> set l1tf_mitigation - arch_call_rest_init - rest_init - kernel_init - kernel_init_freeable - do_basic_setup - do_initcalls --> calls swapfile_init() (initcall level 4) The swapfile size only depends on swp pte format on non-x86 archs, so caching it is safe too. Since at it, rename max_swapfile_size() to arch_max_swapfile_size() because arch can define its own function, so it's more straightforward to have "arch_" as its prefix. At the meantime, export swapfile_maximum_size to replace the old usages of max_swapfile_size(). [peterx@redhat.com: declare arch_max_swapfile_size) in swapfile.h] Link: https://lkml.kernel.org/r/YxTh1GuC6ro5fKL5@xz-m1.local Link: https://lkml.kernel.org/r/20220811161331.37055-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:30 +00:00
swapfile_maximum_size = arch_max_swapfile_size();
mm/swap: cache swap migration A/D bits support Introduce a variable swap_migration_ad_supported to cache whether the arch supports swap migration A/D bits. Here one thing to mention is that SWP_MIG_TOTAL_BITS will internally reference the other macro MAX_PHYSMEM_BITS, which is a function call on x86 (constant on all the rest of archs). It's safe to reference it in swapfile_init() because when reaching here we're already during initcalls level 4 so we must have initialized 5-level pgtable for x86_64 (right after early_identify_cpu() finishes). - start_kernel - setup_arch - early_cpu_init - get_cpu_cap --> fetch from CPUID (including X86_FEATURE_LA57) - early_identify_cpu --> clear X86_FEATURE_LA57 (if early lvl5 not enabled (USE_EARLY_PGTABLE_L5)) - arch_call_rest_init - rest_init - kernel_init - kernel_init_freeable - do_basic_setup - do_initcalls --> calls swapfile_init() (initcall level 4) This should slightly speed up the migration swap entry handlings. Link: https://lkml.kernel.org/r/20220811161331.37055-8-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:31 +00:00
#ifdef CONFIG_MIGRATION
if (swapfile_maximum_size >= (1UL << SWP_MIG_TOTAL_BITS))
swap_migration_ad_supported = true;
#endif /* CONFIG_MIGRATION */
swap: choose swap device according to numa node If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 23:24:57 +00:00
return 0;
}
subsys_initcall(swapfile_init);