linux/drivers/mmc/host/sdhci-tegra.c

561 lines
16 KiB
C
Raw Normal View History

/*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/reset.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/gpio/consumer.h>
#include "sdhci-pltfm.h"
/* Tegra SDHOST controller vendor register definitions */
#define SDHCI_TEGRA_VENDOR_CLOCK_CTRL 0x100
#define SDHCI_CLOCK_CTRL_TAP_MASK 0x00ff0000
#define SDHCI_CLOCK_CTRL_TAP_SHIFT 16
#define SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE BIT(5)
#define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3)
#define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2)
#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
#define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 0x20
#define SDHCI_MISC_CTRL_ENABLE_DDR50 0x200
#define SDHCI_TEGRA_AUTO_CAL_CONFIG 0x1e4
#define SDHCI_AUTO_CAL_START BIT(31)
#define SDHCI_AUTO_CAL_ENABLE BIT(29)
#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0)
#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1)
#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2)
#define NVQUIRK_ENABLE_SDR50 BIT(3)
#define NVQUIRK_ENABLE_SDR104 BIT(4)
#define NVQUIRK_ENABLE_DDR50 BIT(5)
#define NVQUIRK_HAS_PADCALIB BIT(6)
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
u32 nvquirks;
};
struct sdhci_tegra {
const struct sdhci_tegra_soc_data *soc_data;
struct gpio_desc *power_gpio;
bool ddr_signaling;
bool pad_calib_required;
struct reset_control *rst;
};
static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
if (unlikely((soc_data->nvquirks & NVQUIRK_FORCE_SDHCI_SPEC_200) &&
(reg == SDHCI_HOST_VERSION))) {
/* Erratum: Version register is invalid in HW. */
return SDHCI_SPEC_200;
}
return readw(host->ioaddr + reg);
}
static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
switch (reg) {
case SDHCI_TRANSFER_MODE:
/*
* Postpone this write, we must do it together with a
* command write that is down below.
*/
pltfm_host->xfer_mode_shadow = val;
return;
case SDHCI_COMMAND:
writel((val << 16) | pltfm_host->xfer_mode_shadow,
host->ioaddr + SDHCI_TRANSFER_MODE);
return;
}
writew(val, host->ioaddr + reg);
}
static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
/* Seems like we're getting spurious timeout and crc errors, so
* disable signalling of them. In case of real errors software
* timers should take care of eventually detecting them.
*/
if (unlikely(reg == SDHCI_SIGNAL_ENABLE))
val &= ~(SDHCI_INT_TIMEOUT|SDHCI_INT_CRC);
writel(val, host->ioaddr + reg);
if (unlikely((soc_data->nvquirks & NVQUIRK_ENABLE_BLOCK_GAP_DET) &&
(reg == SDHCI_INT_ENABLE))) {
/* Erratum: Must enable block gap interrupt detection */
u8 gap_ctrl = readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL);
if (val & SDHCI_INT_CARD_INT)
gap_ctrl |= 0x8;
else
gap_ctrl &= ~0x8;
writeb(gap_ctrl, host->ioaddr + SDHCI_BLOCK_GAP_CONTROL);
}
}
static unsigned int tegra_sdhci_get_ro(struct sdhci_host *host)
{
return mmc_gpio_get_ro(host->mmc);
}
static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
u32 misc_ctrl, clk_ctrl;
sdhci_reset(host, mask);
if (!(mask & SDHCI_RESET_ALL))
return;
misc_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
mmc: tegra: Only advertise UHS modes if IO regulator is present To support UHS modes for Tegra an external regulator must be present to adjust the IO voltage accordingly. Even if the regulator is not present but the host supports the UHS modes and the device supports the UHS modes, then we will attempt to switch to a high-speed mode. Without an external regulator, Tegra will fail to switch to the high-speed mode. It has been found that with some SD cards, that once it has been switch to operate at a high-speed mode, all subsequent commands issues to the card will fail and so it will not be possible to switch back to a non high-speed mode and so the SD card initialisation will fail. The SDHCI core does not require that the host have an external regulator when switching to UHS modes and therefore, the Tegra SDHCI host controller should only advertise the UHS modes as being supported if the regulator for the IO voltage is present. Fortunately, Tegra has a vendor specific register which can be used to control which modes are advertised via the SDHCI_CAPABILITIES register. Hence, if there is no IO voltage regulator available for the Tegra SDHCI host, then don't advertise the UHS modes. Note that if the regulator is not available, we also don't advertise that the SDHCI is compatible with v3.0 of the SDHCI specification because this will read the SDHCI_CAPABILITIES_1 register which will enable other UHS modes. This fixes commit 7ad2ed1dfcbe ("mmc: tegra: enable UHS-I modes") which enables UHS mode without checking if the board can support them. Fixes: 7ad2ed1dfcbe ("mmc: tegra: enable UHS-I modes") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-12 13:53:37 +00:00
misc_ctrl &= ~(SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 |
SDHCI_MISC_CTRL_ENABLE_SDR50 |
SDHCI_MISC_CTRL_ENABLE_DDR50 |
SDHCI_MISC_CTRL_ENABLE_SDR104);
clk_ctrl &= ~SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE;
mmc: tegra: Only advertise UHS modes if IO regulator is present To support UHS modes for Tegra an external regulator must be present to adjust the IO voltage accordingly. Even if the regulator is not present but the host supports the UHS modes and the device supports the UHS modes, then we will attempt to switch to a high-speed mode. Without an external regulator, Tegra will fail to switch to the high-speed mode. It has been found that with some SD cards, that once it has been switch to operate at a high-speed mode, all subsequent commands issues to the card will fail and so it will not be possible to switch back to a non high-speed mode and so the SD card initialisation will fail. The SDHCI core does not require that the host have an external regulator when switching to UHS modes and therefore, the Tegra SDHCI host controller should only advertise the UHS modes as being supported if the regulator for the IO voltage is present. Fortunately, Tegra has a vendor specific register which can be used to control which modes are advertised via the SDHCI_CAPABILITIES register. Hence, if there is no IO voltage regulator available for the Tegra SDHCI host, then don't advertise the UHS modes. Note that if the regulator is not available, we also don't advertise that the SDHCI is compatible with v3.0 of the SDHCI specification because this will read the SDHCI_CAPABILITIES_1 register which will enable other UHS modes. This fixes commit 7ad2ed1dfcbe ("mmc: tegra: enable UHS-I modes") which enables UHS mode without checking if the board can support them. Fixes: 7ad2ed1dfcbe ("mmc: tegra: enable UHS-I modes") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-12 13:53:37 +00:00
/*
* If the board does not define a regulator for the SDHCI
* IO voltage, then don't advertise support for UHS modes
* even if the device supports it because the IO voltage
* cannot be configured.
*/
if (!IS_ERR(host->mmc->supply.vqmmc)) {
/* Erratum: Enable SDHCI spec v3.00 support */
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300;
/* Advertise UHS modes as supported by host */
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR50)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR50;
if (soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_DDR50;
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR104)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR104;
if (soc_data->nvquirks & SDHCI_MISC_CTRL_ENABLE_SDR50)
clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE;
}
sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
tegra_host->pad_calib_required = true;
tegra_host->ddr_signaling = false;
}
static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
{
u32 val;
mdelay(1);
val = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
val |= SDHCI_AUTO_CAL_ENABLE | SDHCI_AUTO_CAL_START;
sdhci_writel(host,val, SDHCI_TEGRA_AUTO_CAL_CONFIG);
}
static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
unsigned long host_clk;
if (!clock)
return sdhci_set_clock(host, clock);
host_clk = tegra_host->ddr_signaling ? clock * 2 : clock;
clk_set_rate(pltfm_host->clk, host_clk);
host->max_clk = clk_get_rate(pltfm_host->clk);
sdhci_set_clock(host, clock);
if (tegra_host->pad_calib_required) {
tegra_sdhci_pad_autocalib(host);
tegra_host->pad_calib_required = false;
}
}
static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host,
unsigned timing)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
if (timing == MMC_TIMING_UHS_DDR50)
tegra_host->ddr_signaling = true;
return sdhci_set_uhs_signaling(host, timing);
}
static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
/*
* DDR modes require the host to run at double the card frequency, so
* the maximum rate we can support is half of the module input clock.
*/
return clk_round_rate(pltfm_host->clk, UINT_MAX) / 2;
}
static void tegra_sdhci_set_tap(struct sdhci_host *host, unsigned int tap)
{
u32 reg;
reg = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
reg &= ~SDHCI_CLOCK_CTRL_TAP_MASK;
reg |= tap << SDHCI_CLOCK_CTRL_TAP_SHIFT;
sdhci_writel(host, reg, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
}
static int tegra_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
{
unsigned int min, max;
/*
* Start search for minimum tap value at 10, as smaller values are
* may wrongly be reported as working but fail at higher speeds,
* according to the TRM.
*/
min = 10;
while (min < 255) {
tegra_sdhci_set_tap(host, min);
if (!mmc_send_tuning(host->mmc, opcode, NULL))
break;
min++;
}
/* Find the maximum tap value that still passes. */
max = min + 1;
while (max < 255) {
tegra_sdhci_set_tap(host, max);
if (mmc_send_tuning(host->mmc, opcode, NULL)) {
max--;
break;
}
max++;
}
/* The TRM states the ideal tap value is at 75% in the passing range. */
tegra_sdhci_set_tap(host, min + ((max - min) * 3 / 4));
return mmc_send_tuning(host->mmc, opcode, NULL);
}
static void tegra_sdhci_voltage_switch(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
tegra_host->pad_calib_required = true;
}
static const struct sdhci_ops tegra_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.platform_execute_tuning = tegra_sdhci_execute_tuning,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
.voltage_switch = tegra_sdhci_voltage_switch,
.get_max_clock = tegra_sdhci_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.ops = &tegra_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra20 = {
.pdata = &sdhci_tegra20_pdata,
.nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 |
NVQUIRK_ENABLE_BLOCK_GAP_DET,
};
static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra30 = {
.pdata = &sdhci_tegra30_pdata,
.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 |
NVQUIRK_ENABLE_SDR50 |
NVQUIRK_ENABLE_SDR104 |
NVQUIRK_HAS_PADCALIB,
};
static const struct sdhci_ops tegra114_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
.write_w = tegra_sdhci_writew,
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
.platform_execute_tuning = tegra_sdhci_execute_tuning,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
.voltage_switch = tegra_sdhci_voltage_switch,
.get_max_clock = tegra_sdhci_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra114_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra114 = {
.pdata = &sdhci_tegra114_pdata,
};
static const struct sdhci_pltfm_data sdhci_tegra124_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
/*
* The TRM states that the SD/MMC controller found on
* Tegra124 can address 34 bits (the maximum supported by
* the Tegra memory controller), but tests show that DMA
* to or from above 4 GiB doesn't work. This is possibly
* caused by missing programming, though it's not obvious
* what sequence is required. Mark 64-bit DMA broken for
* now to fix this for existing users (e.g. Nyan boards).
*/
SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
.ops = &tegra114_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra124 = {
.pdata = &sdhci_tegra124_pdata,
};
static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra114_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
.pdata = &sdhci_tegra210_pdata,
};
static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra114_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
.pdata = &sdhci_tegra186_pdata,
};
static const struct of_device_id sdhci_tegra_dt_match[] = {
{ .compatible = "nvidia,tegra186-sdhci", .data = &soc_data_tegra186 },
{ .compatible = "nvidia,tegra210-sdhci", .data = &soc_data_tegra210 },
{ .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra124 },
{ .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 },
{ .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 },
{ .compatible = "nvidia,tegra20-sdhci", .data = &soc_data_tegra20 },
{}
};
MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match);
static int sdhci_tegra_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
const struct sdhci_tegra_soc_data *soc_data;
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_tegra *tegra_host;
struct clk *clk;
int rc;
match = of_match_device(sdhci_tegra_dt_match, &pdev->dev);
if (!match)
return -EINVAL;
soc_data = match->data;
host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*tegra_host));
if (IS_ERR(host))
return PTR_ERR(host);
pltfm_host = sdhci_priv(host);
tegra_host = sdhci_pltfm_priv(pltfm_host);
tegra_host->ddr_signaling = false;
tegra_host->pad_calib_required = false;
tegra_host->soc_data = soc_data;
rc = mmc_of_parse(host->mmc);
if (rc)
goto err_parse_dt;
if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
host->mmc->caps |= MMC_CAP_1_8V_DDR;
tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
GPIOD_OUT_HIGH);
if (IS_ERR(tegra_host->power_gpio)) {
rc = PTR_ERR(tegra_host->power_gpio);
goto err_power_req;
}
clk = devm_clk_get(mmc_dev(host->mmc), NULL);
if (IS_ERR(clk)) {
dev_err(mmc_dev(host->mmc), "clk err\n");
rc = PTR_ERR(clk);
goto err_clk_get;
}
clk_prepare_enable(clk);
pltfm_host->clk = clk;
tegra_host->rst = devm_reset_control_get_exclusive(&pdev->dev,
"sdhci");
if (IS_ERR(tegra_host->rst)) {
rc = PTR_ERR(tegra_host->rst);
dev_err(&pdev->dev, "failed to get reset control: %d\n", rc);
goto err_rst_get;
}
rc = reset_control_assert(tegra_host->rst);
if (rc)
goto err_rst_get;
usleep_range(2000, 4000);
rc = reset_control_deassert(tegra_host->rst);
if (rc)
goto err_rst_get;
usleep_range(2000, 4000);
rc = sdhci_add_host(host);
if (rc)
goto err_add_host;
return 0;
err_add_host:
reset_control_assert(tegra_host->rst);
err_rst_get:
clk_disable_unprepare(pltfm_host->clk);
err_clk_get:
err_power_req:
err_parse_dt:
sdhci_pltfm_free(pdev);
return rc;
}
static int sdhci_tegra_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
sdhci_remove_host(host, 0);
reset_control_assert(tegra_host->rst);
usleep_range(2000, 4000);
clk_disable_unprepare(pltfm_host->clk);
sdhci_pltfm_free(pdev);
return 0;
}
static struct platform_driver sdhci_tegra_driver = {
.driver = {
.name = "sdhci-tegra",
.of_match_table = sdhci_tegra_dt_match,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_tegra_probe,
.remove = sdhci_tegra_remove,
};
module_platform_driver(sdhci_tegra_driver);
MODULE_DESCRIPTION("SDHCI driver for Tegra");
MODULE_AUTHOR("Google, Inc.");
MODULE_LICENSE("GPL v2");