linux/arch/x86/kvm/x86.h

373 lines
8.9 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef ARCH_X86_KVM_X86_H
#define ARCH_X86_KVM_X86_H
#include <linux/kvm_host.h>
#include <asm/pvclock.h>
#include "kvm_cache_regs.h"
#define KVM_DEFAULT_PLE_GAP 128
#define KVM_VMX_DEFAULT_PLE_WINDOW 4096
#define KVM_DEFAULT_PLE_WINDOW_GROW 2
#define KVM_DEFAULT_PLE_WINDOW_SHRINK 0
#define KVM_VMX_DEFAULT_PLE_WINDOW_MAX UINT_MAX
#define KVM_SVM_DEFAULT_PLE_WINDOW_MAX USHRT_MAX
#define KVM_SVM_DEFAULT_PLE_WINDOW 3000
static inline unsigned int __grow_ple_window(unsigned int val,
unsigned int base, unsigned int modifier, unsigned int max)
{
u64 ret = val;
if (modifier < 1)
return base;
if (modifier < base)
ret *= modifier;
else
ret += modifier;
return min(ret, (u64)max);
}
static inline unsigned int __shrink_ple_window(unsigned int val,
unsigned int base, unsigned int modifier, unsigned int min)
{
if (modifier < 1)
return base;
if (modifier < base)
val /= modifier;
else
val -= modifier;
return max(val, min);
}
#define MSR_IA32_CR_PAT_DEFAULT 0x0007040600070406ULL
static inline void kvm_clear_exception_queue(struct kvm_vcpu *vcpu)
{
KVM: nVMX: Fix bug of injecting L2 exception into L1 kvm_clear_exception_queue() should clear pending exception. This also includes exceptions which were only marked pending but not yet injected. This is because exception.pending is used for both L1 and L2 to determine if an exception should be raised to guest. Note that an exception which is pending but not yet injected will be raised again once the guest will be resumed. Consider the following scenario: 1) L0 KVM with ignore_msrs=false. 2) L1 prepare vmcs12 with the following: a) No intercepts on MSR (MSR_BITMAP exist and is filled with 0). b) No intercept for #GP. c) vmx-preemption-timer is configured. 3) L1 enters into L2. 4) L2 reads an unhandled MSR that exists in MSR_BITMAP (such as 0x1fff). L2 RDMSR could be handled as described below: 1) L2 exits to L0 on RDMSR and calls handle_rdmsr(). 2) handle_rdmsr() calls kvm_inject_gp() which sets KVM_REQ_EVENT, exception.pending=true and exception.injected=false. 3) vcpu_enter_guest() consumes KVM_REQ_EVENT and calls inject_pending_event() which calls vmx_check_nested_events() which sees that exception.pending=true but nested_vmx_check_exception() returns 0 and therefore does nothing at this point. However let's assume it later sees vmx-preemption-timer expired and therefore exits from L2 to L1 by calling nested_vmx_vmexit(). 4) nested_vmx_vmexit() calls prepare_vmcs12() which calls vmcs12_save_pending_event() but it does nothing as exception.injected is false. Also prepare_vmcs12() calls kvm_clear_exception_queue() which does nothing as exception.injected is already false. 5) We now return from vmx_check_nested_events() with 0 while still having exception.pending=true! 6) Therefore inject_pending_event() continues and we inject L2 exception to L1!... This commit will fix above issue by changing step (4) to clear exception.pending in kvm_clear_exception_queue(). Fixes: 664f8e26b00c ("KVM: X86: Fix loss of exception which has not yet been injected") Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-11-19 16:25:43 +00:00
vcpu->arch.exception.pending = false;
vcpu->arch.exception.injected = false;
}
static inline void kvm_queue_interrupt(struct kvm_vcpu *vcpu, u8 vector,
bool soft)
{
KVM: x86: Rename interrupt.pending to interrupt.injected For exceptions & NMIs events, KVM code use the following coding convention: *) "pending" represents an event that should be injected to guest at some point but it's side-effects have not yet occurred. *) "injected" represents an event that it's side-effects have already occurred. However, interrupts don't conform to this coding convention. All current code flows mark interrupt.pending when it's side-effects have already taken place (For example, bit moved from LAPIC IRR to ISR). Therefore, it makes sense to just rename interrupt.pending to interrupt.injected. This change follows logic of previous commit 664f8e26b00c ("KVM: X86: Fix loss of exception which has not yet been injected") which changed exception to follow this coding convention as well. It is important to note that in case !lapic_in_kernel(vcpu), interrupt.pending usage was and still incorrect. In this case, interrrupt.pending can only be set using one of the following ioctls: KVM_INTERRUPT, KVM_SET_VCPU_EVENTS and KVM_SET_SREGS. Looking at how QEMU uses these ioctls, one can see that QEMU uses them either to re-set an "interrupt.pending" state it has received from KVM (via KVM_GET_VCPU_EVENTS interrupt.pending or via KVM_GET_SREGS interrupt_bitmap) or by dispatching a new interrupt from QEMU's emulated LAPIC which reset bit in IRR and set bit in ISR before sending ioctl to KVM. So it seems that indeed "interrupt.pending" in this case is also suppose to represent "interrupt.injected". However, kvm_cpu_has_interrupt() & kvm_cpu_has_injectable_intr() is misusing (now named) interrupt.injected in order to return if there is a pending interrupt. This leads to nVMX/nSVM not be able to distinguish if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on pending interrupt or should re-inject an injected interrupt. Therefore, add a FIXME at these functions for handling this issue. This patch introduce no semantics change. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-23 00:01:31 +00:00
vcpu->arch.interrupt.injected = true;
vcpu->arch.interrupt.soft = soft;
vcpu->arch.interrupt.nr = vector;
}
static inline void kvm_clear_interrupt_queue(struct kvm_vcpu *vcpu)
{
KVM: x86: Rename interrupt.pending to interrupt.injected For exceptions & NMIs events, KVM code use the following coding convention: *) "pending" represents an event that should be injected to guest at some point but it's side-effects have not yet occurred. *) "injected" represents an event that it's side-effects have already occurred. However, interrupts don't conform to this coding convention. All current code flows mark interrupt.pending when it's side-effects have already taken place (For example, bit moved from LAPIC IRR to ISR). Therefore, it makes sense to just rename interrupt.pending to interrupt.injected. This change follows logic of previous commit 664f8e26b00c ("KVM: X86: Fix loss of exception which has not yet been injected") which changed exception to follow this coding convention as well. It is important to note that in case !lapic_in_kernel(vcpu), interrupt.pending usage was and still incorrect. In this case, interrrupt.pending can only be set using one of the following ioctls: KVM_INTERRUPT, KVM_SET_VCPU_EVENTS and KVM_SET_SREGS. Looking at how QEMU uses these ioctls, one can see that QEMU uses them either to re-set an "interrupt.pending" state it has received from KVM (via KVM_GET_VCPU_EVENTS interrupt.pending or via KVM_GET_SREGS interrupt_bitmap) or by dispatching a new interrupt from QEMU's emulated LAPIC which reset bit in IRR and set bit in ISR before sending ioctl to KVM. So it seems that indeed "interrupt.pending" in this case is also suppose to represent "interrupt.injected". However, kvm_cpu_has_interrupt() & kvm_cpu_has_injectable_intr() is misusing (now named) interrupt.injected in order to return if there is a pending interrupt. This leads to nVMX/nSVM not be able to distinguish if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on pending interrupt or should re-inject an injected interrupt. Therefore, add a FIXME at these functions for handling this issue. This patch introduce no semantics change. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-23 00:01:31 +00:00
vcpu->arch.interrupt.injected = false;
}
static inline bool kvm_event_needs_reinjection(struct kvm_vcpu *vcpu)
{
KVM: x86: Rename interrupt.pending to interrupt.injected For exceptions & NMIs events, KVM code use the following coding convention: *) "pending" represents an event that should be injected to guest at some point but it's side-effects have not yet occurred. *) "injected" represents an event that it's side-effects have already occurred. However, interrupts don't conform to this coding convention. All current code flows mark interrupt.pending when it's side-effects have already taken place (For example, bit moved from LAPIC IRR to ISR). Therefore, it makes sense to just rename interrupt.pending to interrupt.injected. This change follows logic of previous commit 664f8e26b00c ("KVM: X86: Fix loss of exception which has not yet been injected") which changed exception to follow this coding convention as well. It is important to note that in case !lapic_in_kernel(vcpu), interrupt.pending usage was and still incorrect. In this case, interrrupt.pending can only be set using one of the following ioctls: KVM_INTERRUPT, KVM_SET_VCPU_EVENTS and KVM_SET_SREGS. Looking at how QEMU uses these ioctls, one can see that QEMU uses them either to re-set an "interrupt.pending" state it has received from KVM (via KVM_GET_VCPU_EVENTS interrupt.pending or via KVM_GET_SREGS interrupt_bitmap) or by dispatching a new interrupt from QEMU's emulated LAPIC which reset bit in IRR and set bit in ISR before sending ioctl to KVM. So it seems that indeed "interrupt.pending" in this case is also suppose to represent "interrupt.injected". However, kvm_cpu_has_interrupt() & kvm_cpu_has_injectable_intr() is misusing (now named) interrupt.injected in order to return if there is a pending interrupt. This leads to nVMX/nSVM not be able to distinguish if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on pending interrupt or should re-inject an injected interrupt. Therefore, add a FIXME at these functions for handling this issue. This patch introduce no semantics change. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-23 00:01:31 +00:00
return vcpu->arch.exception.injected || vcpu->arch.interrupt.injected ||
vcpu->arch.nmi_injected;
}
static inline bool kvm_exception_is_soft(unsigned int nr)
{
return (nr == BP_VECTOR) || (nr == OF_VECTOR);
}
static inline bool is_protmode(struct kvm_vcpu *vcpu)
{
return kvm_read_cr0_bits(vcpu, X86_CR0_PE);
}
static inline int is_long_mode(struct kvm_vcpu *vcpu)
{
#ifdef CONFIG_X86_64
return vcpu->arch.efer & EFER_LMA;
#else
return 0;
#endif
}
static inline bool is_64_bit_mode(struct kvm_vcpu *vcpu)
{
int cs_db, cs_l;
if (!is_long_mode(vcpu))
return false;
kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
return cs_l;
}
static inline bool is_la57_mode(struct kvm_vcpu *vcpu)
{
#ifdef CONFIG_X86_64
return (vcpu->arch.efer & EFER_LMA) &&
kvm_read_cr4_bits(vcpu, X86_CR4_LA57);
#else
return 0;
#endif
}
static inline bool x86_exception_has_error_code(unsigned int vector)
{
static u32 exception_has_error_code = BIT(DF_VECTOR) | BIT(TS_VECTOR) |
BIT(NP_VECTOR) | BIT(SS_VECTOR) | BIT(GP_VECTOR) |
BIT(PF_VECTOR) | BIT(AC_VECTOR);
return (1U << vector) & exception_has_error_code;
}
static inline bool mmu_is_nested(struct kvm_vcpu *vcpu)
{
return vcpu->arch.walk_mmu == &vcpu->arch.nested_mmu;
}
static inline int is_pae(struct kvm_vcpu *vcpu)
{
return kvm_read_cr4_bits(vcpu, X86_CR4_PAE);
}
static inline int is_pse(struct kvm_vcpu *vcpu)
{
return kvm_read_cr4_bits(vcpu, X86_CR4_PSE);
}
static inline int is_paging(struct kvm_vcpu *vcpu)
{
return likely(kvm_read_cr0_bits(vcpu, X86_CR0_PG));
}
static inline bool is_pae_paging(struct kvm_vcpu *vcpu)
{
return !is_long_mode(vcpu) && is_pae(vcpu) && is_paging(vcpu);
}
static inline u32 bit(int bitno)
{
return 1 << (bitno & 31);
}
static inline u8 vcpu_virt_addr_bits(struct kvm_vcpu *vcpu)
{
return kvm_read_cr4_bits(vcpu, X86_CR4_LA57) ? 57 : 48;
}
static inline u8 ctxt_virt_addr_bits(struct x86_emulate_ctxt *ctxt)
{
return (ctxt->ops->get_cr(ctxt, 4) & X86_CR4_LA57) ? 57 : 48;
}
static inline u64 get_canonical(u64 la, u8 vaddr_bits)
{
return ((int64_t)la << (64 - vaddr_bits)) >> (64 - vaddr_bits);
}
static inline bool is_noncanonical_address(u64 la, struct kvm_vcpu *vcpu)
{
#ifdef CONFIG_X86_64
return get_canonical(la, vcpu_virt_addr_bits(vcpu)) != la;
#else
return false;
#endif
}
static inline bool emul_is_noncanonical_address(u64 la,
struct x86_emulate_ctxt *ctxt)
{
#ifdef CONFIG_X86_64
return get_canonical(la, ctxt_virt_addr_bits(ctxt)) != la;
#else
return false;
#endif
}
static inline void vcpu_cache_mmio_info(struct kvm_vcpu *vcpu,
gva_t gva, gfn_t gfn, unsigned access)
{
u64 gen = kvm_memslots(vcpu->kvm)->generation;
KVM: Explicitly define the "memslot update in-progress" bit KVM uses bit 0 of the memslots generation as an "update in-progress" flag, which is used by x86 to prevent caching MMIO access while the memslots are changing. Although the intended behavior is flag-like, e.g. MMIO sptes intentionally drop the in-progress bit so as to avoid caching data from in-flux memslots, the implementation oftentimes treats the bit as part of the generation number itself, e.g. incrementing the generation increments twice, once to set the flag and once to clear it. Prior to commit 4bd518f1598d ("KVM: use separate generations for each address space"), incorporating the "update in-progress" bit into the generation number largely made sense, e.g. "real" generations are even, "bogus" generations are odd, most code doesn't need to be aware of the bit, etc... Now that unique memslots generation numbers are assigned to each address space, stealthing the in-progress status into the generation number results in a wide variety of subtle code, e.g. kvm_create_vm() jumps over bit 0 when initializing the memslots generation without any hint as to why. Explicitly define the flag and convert as much code as possible (which isn't much) to actually treat it like a flag. This paves the way for eventually using a different bit for "update in-progress" so that it can be a flag in truth instead of a awkward extension to the generation number. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05 21:01:14 +00:00
if (unlikely(gen & KVM_MEMSLOT_GEN_UPDATE_IN_PROGRESS))
return;
/*
* If this is a shadow nested page table, the "GVA" is
* actually a nGPA.
*/
vcpu->arch.mmio_gva = mmu_is_nested(vcpu) ? 0 : gva & PAGE_MASK;
vcpu->arch.mmio_access = access;
vcpu->arch.mmio_gfn = gfn;
vcpu->arch.mmio_gen = gen;
}
static inline bool vcpu_match_mmio_gen(struct kvm_vcpu *vcpu)
{
return vcpu->arch.mmio_gen == kvm_memslots(vcpu->kvm)->generation;
}
/*
* Clear the mmio cache info for the given gva. If gva is MMIO_GVA_ANY, we
* clear all mmio cache info.
*/
#define MMIO_GVA_ANY (~(gva_t)0)
static inline void vcpu_clear_mmio_info(struct kvm_vcpu *vcpu, gva_t gva)
{
if (gva != MMIO_GVA_ANY && vcpu->arch.mmio_gva != (gva & PAGE_MASK))
return;
vcpu->arch.mmio_gva = 0;
}
static inline bool vcpu_match_mmio_gva(struct kvm_vcpu *vcpu, unsigned long gva)
{
if (vcpu_match_mmio_gen(vcpu) && vcpu->arch.mmio_gva &&
vcpu->arch.mmio_gva == (gva & PAGE_MASK))
return true;
return false;
}
static inline bool vcpu_match_mmio_gpa(struct kvm_vcpu *vcpu, gpa_t gpa)
{
if (vcpu_match_mmio_gen(vcpu) && vcpu->arch.mmio_gfn &&
vcpu->arch.mmio_gfn == gpa >> PAGE_SHIFT)
return true;
return false;
}
static inline unsigned long kvm_register_readl(struct kvm_vcpu *vcpu,
enum kvm_reg reg)
{
unsigned long val = kvm_register_read(vcpu, reg);
return is_64_bit_mode(vcpu) ? val : (u32)val;
}
static inline void kvm_register_writel(struct kvm_vcpu *vcpu,
enum kvm_reg reg,
unsigned long val)
{
if (!is_64_bit_mode(vcpu))
val = (u32)val;
return kvm_register_write(vcpu, reg, val);
}
static inline bool kvm_check_has_quirk(struct kvm *kvm, u64 quirk)
{
return !(kvm->arch.disabled_quirks & quirk);
}
void kvm_set_pending_timer(struct kvm_vcpu *vcpu);
void kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq, int inc_eip);
void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr);
u64 get_kvmclock_ns(struct kvm *kvm);
int kvm_read_guest_virt(struct kvm_vcpu *vcpu,
gva_t addr, void *val, unsigned int bytes,
struct x86_exception *exception);
int kvm_write_guest_virt_system(struct kvm_vcpu *vcpu,
gva_t addr, void *val, unsigned int bytes,
struct x86_exception *exception);
int handle_ud(struct kvm_vcpu *vcpu);
void kvm_deliver_exception_payload(struct kvm_vcpu *vcpu);
void kvm_vcpu_mtrr_init(struct kvm_vcpu *vcpu);
u8 kvm_mtrr_get_guest_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn);
bool kvm_mtrr_valid(struct kvm_vcpu *vcpu, u32 msr, u64 data);
int kvm_mtrr_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data);
int kvm_mtrr_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
bool kvm_mtrr_check_gfn_range_consistency(struct kvm_vcpu *vcpu, gfn_t gfn,
int page_num);
bool kvm_vector_hashing_enabled(void);
int x86_emulate_instruction(struct kvm_vcpu *vcpu, unsigned long cr2,
int emulation_type, void *insn, int insn_len);
x86/fpu: Rename XSAVE macros There are two concepts that have some confusing naming: 1. Extended State Component numbers (currently called XFEATURE_BIT_*) 2. Extended State Component masks (currently called XSTATE_*) The numbers are (currently) from 0-9. State component 3 is the bounds registers for MPX, for instance. But when we want to enable "state component 3", we go set a bit in XCR0. The bit we set is 1<<3. We can check to see if a state component feature is enabled by looking at its bit. The current 'xfeature_bit's are at best xfeature bit _numbers_. Calling them bits is at best inconsistent with ending the enum list with 'XFEATURES_NR_MAX'. This patch renames the enum to be 'xfeature'. These also happen to be what the Intel documentation calls a "state component". We also want to differentiate these from the "XSTATE_*" macros. The "XSTATE_*" macros are a mask, and we rename them to match. These macros are reasonably widely used so this patch is a wee bit big, but this really is just a rename. The only non-mechanical part of this is the s/XSTATE_EXTEND_MASK/XFEATURE_MASK_EXTEND/ We need a better name for it, but that's another patch. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: dave@sr71.net Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20150902233126.38653250@viggo.jf.intel.com [ Ported to v4.3-rc1. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-02 23:31:26 +00:00
#define KVM_SUPPORTED_XCR0 (XFEATURE_MASK_FP | XFEATURE_MASK_SSE \
| XFEATURE_MASK_YMM | XFEATURE_MASK_BNDREGS \
| XFEATURE_MASK_BNDCSR | XFEATURE_MASK_AVX512 \
| XFEATURE_MASK_PKRU)
extern u64 host_xcr0;
extern u64 kvm_supported_xcr0(void);
extern unsigned int min_timer_period_us;
extern bool enable_vmware_backdoor;
KVM: LAPIC: Inject timer interrupt via posted interrupt Dedicated instances are currently disturbed by unnecessary jitter due to the emulated lapic timers firing on the same pCPUs where the vCPUs reside. There is no hardware virtual timer on Intel for guest like ARM, so both programming timer in guest and the emulated timer fires incur vmexits. This patch tries to avoid vmexit when the emulated timer fires, at least in dedicated instance scenario when nohz_full is enabled. In that case, the emulated timers can be offload to the nearest busy housekeeping cpus since APICv has been found for several years in server processors. The guest timer interrupt can then be injected via posted interrupts, which are delivered by the housekeeping cpu once the emulated timer fires. The host should tuned so that vCPUs are placed on isolated physical processors, and with several pCPUs surplus for busy housekeeping. If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode, ~3% redis performance benefit can be observed on Skylake server, and the number of external interrupt vmexits drops substantially. Without patch VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% ) While with patch: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% ) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-06 01:26:51 +00:00
extern int pi_inject_timer;
extern struct static_key kvm_no_apic_vcpu;
static inline u64 nsec_to_cycles(struct kvm_vcpu *vcpu, u64 nsec)
{
return pvclock_scale_delta(nsec, vcpu->arch.virtual_tsc_mult,
vcpu->arch.virtual_tsc_shift);
}
/* Same "calling convention" as do_div:
* - divide (n << 32) by base
* - put result in n
* - return remainder
*/
#define do_shl32_div32(n, base) \
({ \
u32 __quot, __rem; \
asm("divl %2" : "=a" (__quot), "=d" (__rem) \
: "rm" (base), "0" (0), "1" ((u32) n)); \
n = __quot; \
__rem; \
})
static inline bool kvm_mwait_in_guest(struct kvm *kvm)
{
return kvm->arch.mwait_in_guest;
}
static inline bool kvm_hlt_in_guest(struct kvm *kvm)
{
return kvm->arch.hlt_in_guest;
}
static inline bool kvm_pause_in_guest(struct kvm *kvm)
{
return kvm->arch.pause_in_guest;
}
static inline bool kvm_cstate_in_guest(struct kvm *kvm)
{
return kvm->arch.cstate_in_guest;
}
DECLARE_PER_CPU(struct kvm_vcpu *, current_vcpu);
static inline void kvm_before_interrupt(struct kvm_vcpu *vcpu)
{
__this_cpu_write(current_vcpu, vcpu);
}
static inline void kvm_after_interrupt(struct kvm_vcpu *vcpu)
{
__this_cpu_write(current_vcpu, NULL);
}
static inline bool kvm_pat_valid(u64 data)
{
if (data & 0xF8F8F8F8F8F8F8F8ull)
return false;
/* 0, 1, 4, 5, 6, 7 are valid values. */
return (data | ((data & 0x0202020202020202ull) << 1)) == data;
}
void kvm_load_guest_xcr0(struct kvm_vcpu *vcpu);
void kvm_put_guest_xcr0(struct kvm_vcpu *vcpu);
#endif