Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-22 20:22:09 +00:00
Code Issues Packages Projects Releases Wiki Activity
8afcb190f3
linux/drivers/fpga/Kconfig

286 lines
9.1 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 12:07:45 +00:00
# SPDX-License-Identifier: GPL-2.0-only
add FPGA manager core API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 15:36:28 +00:00
#
# FPGA framework configuration
#
Make FPGA a menuconfig to ease disabling it all No need to get into the submenu to disable all FPGA-related config entries Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 15:36:26 +00:00
menuconfig FPGA
add FPGA manager core API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 15:36:28 +00:00
tristate "FPGA Configuration Framework"
help
Say Y here if you want support for configuring FPGAs from the
fpga: change FPGA indirect article to an Change use of 'a fpga' to 'an fpga' Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210608212350.3029742-7-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-08 21:23:44 +00:00
kernel. The FPGA framework adds an FPGA manager class and FPGA
add FPGA manager core API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 15:36:28 +00:00
manager drivers.
fpga manager: add driver for socfpga fpga manager Add driver to fpga manager framework to allow configuration of FPGA in Altera SoCFPGA parts. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 15:36:29 +00:00
if FPGA
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
fpga: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the 32-bit ARM drivers to rely on new symbol. Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-11 15:27:35 +00:00
depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST
fpga: fpga-region: device tree control for FPGA FPGA Regions support programming FPGA under control of the Device Tree. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:29 +00:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
FPGA manager driver support for Altera SOCFPGA.
fpga: region: move device tree support to of-fpga-region.c Create of-fpga-region.c and move the following functions without modification from fpga-region.c. * of_fpga_region_find * of_fpga_region_get_mgr * of_fpga_region_get_bridges * child_regions_with_firmware * of_fpga_region_parse_ov * of_fpga_region_notify_pre_apply * of_fpga_region_notify_post_remove * of_fpga_region_notify * of_fpga_region_probe * of_fpga_region_remove Create two new functions with some code from fpga_region_init/exit. * of_fpga_region_init * of_fpga_region_exit Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:25 +00:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config FPGA_MGR_SOCFPGA_A10
tristate "Altera SoCFPGA Arria10"
fpga: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the 32-bit ARM drivers to rely on new symbol. Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-11 15:27:35 +00:00
depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
select REGMAP_MMIO
fpga: region: move device tree support to of-fpga-region.c Create of-fpga-region.c and move the following functions without modification from fpga-region.c. * of_fpga_region_find * of_fpga_region_get_mgr * of_fpga_region_get_bridges * child_regions_with_firmware * of_fpga_region_parse_ov * of_fpga_region_notify_pre_apply * of_fpga_region_notify_post_remove * of_fpga_region_notify * of_fpga_region_probe * of_fpga_region_remove Create two new functions with some code from fpga_region_init/exit. * of_fpga_region_init * of_fpga_region_exit Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:25 +00:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
FPGA manager driver support for Altera Arria10 SoCFPGA.
fpga: fpga-region: device tree control for FPGA FPGA Regions support programming FPGA under control of the Device Tree. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:29 +00:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config ALTERA_PR_IP_CORE
drivers: fpga: Kconfig: pedantic cleanups Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt <info@metux.net> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 04:24:39 +00:00
tristate "Altera Partial Reconfiguration IP Core"
help
Core driver support for Altera Partial Reconfiguration IP component
fpga: Add support for Lattice iCE40 FPGAs This patch adds support to the FPGA manager for configuring the SRAM of iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40 UltraPlus devices, through slave SPI. Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-27 22:14:26 +00:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config ALTERA_PR_IP_CORE_PLAT
tristate "Platform support of Altera Partial Reconfiguration IP Core"
depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM
fpga manager: Add Altera CvP driver Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 15:36:35 +00:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
Platform driver support for Altera Partial Reconfiguration IP
component
fpga manager: Add Altera CvP driver Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 15:36:35 +00:00
fpga manager: Add altera-ps-spi driver for Altera FPGAs altera-ps-spi loads FPGA firmware over SPI, using the "passive serial" interface on Altera Arria 10, Cyclone V or Stratix V FPGAs. This is one of the simpler ways to set up an FPGA at runtime. The signal interface is close to unidirectional SPI with lsb first. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 15:36:29 +00:00
config FPGA_MGR_ALTERA_PS_SPI
tristate "Altera FPGA Passive Serial over SPI"
depends on SPI
fpga-manager: altera-ps-spi: Fix build error If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y, build fails: drivers/fpga/altera-ps-spi.o: In function `altera_ps_write': altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table' Select BITREVERSE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: fcfe18f885f6 ("fpga-manager: altera-ps-spi: use bitrev8x4") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-08 07:13:56 +00:00
select BITREVERSE
fpga manager: Add altera-ps-spi driver for Altera FPGAs altera-ps-spi loads FPGA firmware over SPI, using the "passive serial" interface on Altera Arria 10, Cyclone V or Stratix V FPGAs. This is one of the simpler ways to set up an FPGA at runtime. The signal interface is close to unidirectional SPI with lsb first. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 15:36:29 +00:00
help
FPGA manager driver support for Altera Arria/Cyclone/Stratix
using the passive serial interface over SPI.
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config FPGA_MGR_ALTERA_CVP
fpga: altera-cvp: Add Stratix10 (V2) Support Add Stratix10 specific functions that use a credit mechanism to throttle data to the CvP FIFOs. Add a private structure with function pointers for V1 vs V2 functions. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2019-08-19 20:48:08 +00:00
tristate "Altera CvP FPGA Manager"
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
depends on PCI
fpga-manager: Add Socfpga Arria10 support Add low level driver to support reprogramming FPGAs for Altera SoCFPGA Arria10. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:32 +00:00
help
fpga: altera-cvp: Add Stratix10 (V2) Support Add Stratix10 specific functions that use a credit mechanism to throttle data to the CvP FIFOs. Add a private structure with function pointers for V1 vs V2 functions. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2019-08-19 20:48:08 +00:00
FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V,
Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe.
fpga-manager: Add Socfpga Arria10 support Add low level driver to support reprogramming FPGAs for Altera SoCFPGA Arria10. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:32 +00:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config FPGA_MGR_ZYNQ_FPGA
tristate "Xilinx Zynq FPGA"
depends on ARCH_ZYNQ || COMPILE_TEST
FPGA: Add TS-7300 FPGA manager Add support for loading bitstreams on the Altera Cyclone II FPGA populated on the TS-7300 board. This is done through the configuration and data registers offered through a memory interface between the EP93xx SoC and the FPGA via an intermediate CPLD device. The EP93xx SoC on the TS-7300 does not have direct means of configuring the on-board FPGA other than by using the special memory mapped interface to the CPLD. No other entity on the system can control the FPGA bitstream. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-27 22:14:22 +00:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
FPGA manager driver support for Xilinx Zynq FPGAs.
FPGA: Add TS-7300 FPGA manager Add support for loading bitstreams on the Altera Cyclone II FPGA populated on the TS-7300 board. This is done through the configuration and data registers offered through a memory interface between the EP93xx SoC and the FPGA via an intermediate CPLD device. The EP93xx SoC on the TS-7300 does not have direct means of configuring the on-board FPGA other than by using the special memory mapped interface to the CPLD. No other entity on the system can control the FPGA bitstream. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-27 22:14:22 +00:00
fpga: add intel stratix10 soc fpga manager driver Add driver for reconfiguring Intel Stratix10 SoC FPGA devices. This driver communicates through the Intel service layer driver which does communication with privileged hardware (that does the FPGA programming) through a secure mailbox. Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Richard Gong <richard.gong@intel.com> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13 18:14:04 +00:00
config FPGA_MGR_STRATIX10_SOC
tristate "Intel Stratix10 SoC FPGA Manager"
arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From the Linux kernel point of view these are flavors of the same architecture so there is no need for three top-level arm64 architectures. Simplify this by merging all three architectures into ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries. The side effect is that the INTEL_STRATIX10_SERVICE will now be available for both 32-bit and 64-bit Intel SoCFPGA, even though it is used only for 64-bit. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-11 15:25:38 +00:00
depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE)
fpga: add intel stratix10 soc fpga manager driver Add driver for reconfiguring Intel Stratix10 SoC FPGA devices. This driver communicates through the Intel service layer driver which does communication with privileged hardware (that does the FPGA programming) through a secure mailbox. Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Richard Gong <richard.gong@intel.com> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13 18:14:04 +00:00
help
FPGA manager driver support for the Intel Stratix10 SoC.
fpga: xilinx-spi: extract a common driver core Factor out the gpio handshaking (using PROGRAM_B, INIT_B and DONE) protocol in xilinx-core so that it can be reused for another driver. This commit does not change anything functionally to xilinx-spi. xilinx-core expects drivers to provide a write(const char* buf, size_t count) function that performs the actual write to the device, as well as a struct device* for resource management. Signed-off-by: Charles Perry <charles.perry@savoirfairelinux.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20240321220447.3260065-2-charles.perry@savoirfairelinux.com Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
2024-03-21 22:04:33 +00:00
config FPGA_MGR_XILINX_CORE
tristate
fpga manager: Add Xilinx slave serial SPI driver The driver loads FPGA firmware over SPI, using the "slave serial" configuration interface on Xilinx FPGAs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24 00:34:26 +00:00
config FPGA_MGR_XILINX_SPI
tristate "Xilinx Configuration over Slave Serial (SPI)"
depends on SPI
fpga: xilinx-spi: extract a common driver core Factor out the gpio handshaking (using PROGRAM_B, INIT_B and DONE) protocol in xilinx-core so that it can be reused for another driver. This commit does not change anything functionally to xilinx-spi. xilinx-core expects drivers to provide a write(const char* buf, size_t count) function that performs the actual write to the device, as well as a struct device* for resource management. Signed-off-by: Charles Perry <charles.perry@savoirfairelinux.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20240321220447.3260065-2-charles.perry@savoirfairelinux.com Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
2024-03-21 22:04:33 +00:00
select FPGA_MGR_XILINX_CORE
fpga manager: Add Xilinx slave serial SPI driver The driver loads FPGA firmware over SPI, using the "slave serial" configuration interface on Xilinx FPGAs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24 00:34:26 +00:00
help
FPGA manager driver support for Xilinx FPGA configuration
over slave serial interface.
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config FPGA_MGR_ICE40_SPI
tristate "Lattice iCE40 SPI"
depends on OF && SPI
fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 This commit adds FPGA Manager support for the Xilinx Zynq chip. The code borrows some from the xdevcfg driver in Xilinx' vendor tree. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16 22:42:30 +00:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
fpga: lattice machxo2: Add Lattice MachXO2 support This patch adds support to the FPGA manager for programming MachXO2 device’s internal flash memory, via slave SPI. Signed-off-by: Paolo Pisati <p.pisati@gmail.com> [atull@kernel.org: use existing FPGA mgr API] Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-17 03:43:36 +00:00
config FPGA_MGR_MACHXO2_SPI
tristate "Lattice MachXO2 SPI"
depends on SPI
help
FPGA manager driver support for Lattice MachXO2 configuration
over slave SPI interface.
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config FPGA_MGR_TS73XX
tristate "Technologic Systems TS-73xx SBC FPGA Manager"
depends on ARCH_EP93XX && MACH_TS72XX
help
FPGA manager driver support for the Altera Cyclone II FPGA
present on the TS-73xx SBC boards.
fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 This commit adds FPGA Manager support for the Xilinx Zynq chip. The code borrows some from the xdevcfg driver in Xilinx' vendor tree. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16 22:42:30 +00:00
fpga: add fpga bridge framework This framework adds API functions for enabling/ disabling FPGA bridges under kernel control. This allows the Linux kernel to disable FPGA bridges during FPGA reprogramming and to enable FPGA bridges when FPGA reprogramming is done. This framework is be manufacturer-agnostic, allowing it to be used in interfaces that use the FPGA Manager Framework to reprogram FPGA's. The functions are: * of_fpga_bridge_get * fpga_bridge_put Get/put an exclusive reference to a FPGA bridge. * fpga_bridge_enable * fpga_bridge_disable Enable/Disable traffic through a bridge. * fpga_bridge_register * fpga_bridge_unregister Register/unregister a device-specific low level FPGA Bridge driver. Get an exclusive reference to a bridge and add it to a list: * fpga_bridge_get_to_list To enable/disable/put a set of bridges that are on a list: * fpga_bridges_enable * fpga_bridges_disable * fpga_bridges_put Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:28 +00:00
config FPGA_BRIDGE
tristate "FPGA Bridge Framework"
help
Say Y here if you want to support bridges connected between host
processors and FPGAs or between FPGAs.
ARM: socfpga: fpga bridge driver support Supports Altera SOCFPGA bridges: * fpga2sdram * fpga2hps * hps2fpga * lwhps2fpga Allows enabling/disabling the bridges through the FPGA Bridge Framework API functions. The fpga2sdram driver only supports enabling and disabling of the ports that been configured early on. This is due to a hardware limitation where the read, write, and command ports on the fpga2sdram bridge can only be reconfigured while there are no transactions to the sdram, i.e. when running out of OCRAM before the kernel boots. Device tree property 'init-val' configures the driver to enable or disable the bridge during probe. If the property does not exist, the driver will leave the bridge in its current state. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:30 +00:00
config SOCFPGA_FPGA_BRIDGE
tristate "Altera SoCFPGA FPGA Bridges"
fpga: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the 32-bit ARM drivers to rely on new symbol. Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-11 15:27:35 +00:00
depends on ARCH_INTEL_SOCFPGA && FPGA_BRIDGE
ARM: socfpga: fpga bridge driver support Supports Altera SOCFPGA bridges: * fpga2sdram * fpga2hps * hps2fpga * lwhps2fpga Allows enabling/disabling the bridges through the FPGA Bridge Framework API functions. The fpga2sdram driver only supports enabling and disabling of the ports that been configured early on. This is due to a hardware limitation where the read, write, and command ports on the fpga2sdram bridge can only be reconfigured while there are no transactions to the sdram, i.e. when running out of OCRAM before the kernel boots. Device tree property 'init-val' configures the driver to enable or disable the bridge during probe. If the property does not exist, the driver will leave the bridge in its current state. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:30 +00:00
help
Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
devices.
fpga: add altera freeze bridge support Add a low level driver for Altera Freeze Bridges to the FPGA Bridge framework. A freeze bridge is a bridge that exists in the FPGA fabric to isolate one region of the FPGA from the busses while that one region is being reprogrammed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:31 +00:00
config ALTERA_FREEZE_BRIDGE
tristate "Altera FPGA Freeze Bridge"
fpga: altera_freeze_bridge: remove restriction to socfpga The Altera Freeze Bridge should not be restricted to ARCH_SOCFPGA since it can be used on other platforms such as Stratix10. Signed-off-by: Alan Tull <atull@kernel.org> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-24 20:45:53 +00:00
depends on FPGA_BRIDGE && HAS_IOMEM
fpga: add altera freeze bridge support Add a low level driver for Altera Freeze Bridges to the FPGA Bridge framework. A freeze bridge is a bridge that exists in the FPGA fabric to isolate one region of the FPGA from the busses while that one region is being reprogrammed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 19:14:31 +00:00
help
Say Y to enable drivers for Altera FPGA Freeze bridges. A
freeze bridge is a bridge that exists in the FPGA fabric to
isolate one region of the FPGA from the busses while that
region is being reprogrammed.
fpga: Add support for Xilinx LogiCORE PR Decoupler This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24 15:33:21 +00:00
config XILINX_PR_DECOUPLER
tristate "Xilinx LogiCORE PR Decoupler"
depends on FPGA_BRIDGE
depends on HAS_IOMEM
help
fpga: Add support for Xilinx DFX AXI Shutdown manager This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI shutdown manager IP. It can be used to safely handling the AXI traffic on a Reconfigurable Partition when it is undergoing dynamic reconfiguration and there by preventing system deadlock that may occur if AXI transactions are interrupted during reconfiguration. PR-Decoupler and AXI shutdown manager are completely different IPs. But both the IP registers are compatible and also both belong to the same sub-system (fpga-bridge).So using same driver for both IP's. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-11 05:11:48 +00:00
Say Y to enable drivers for Xilinx LogiCORE PR Decoupler
fpga: Fix spelling mistake "eXchnage" -> "exchange" in Kconfig There is a spelling mistake in the Kconfig text. Fix it. Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2021-07-28 21:51:50 +00:00
or Xilinx Dynamic Function eXchange AIX Shutdown Manager.
fpga: Add support for Xilinx LogiCORE PR Decoupler This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24 15:33:21 +00:00
The PR Decoupler exists in the FPGA fabric to isolate one
region of the FPGA from the busses while that region is
being reprogrammed during partial reconfig.
fpga: Add support for Xilinx DFX AXI Shutdown manager This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI shutdown manager IP. It can be used to safely handling the AXI traffic on a Reconfigurable Partition when it is undergoing dynamic reconfiguration and there by preventing system deadlock that may occur if AXI transactions are interrupted during reconfiguration. PR-Decoupler and AXI shutdown manager are completely different IPs. But both the IP registers are compatible and also both belong to the same sub-system (fpga-bridge).So using same driver for both IP's. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-11 05:11:48 +00:00
The Dynamic Function eXchange AXI shutdown manager prevents
AXI traffic from passing through the bridge. The controller
safely handles AXI4MM and AXI4-Lite interfaces on a
Reconfigurable Partition when it is undergoing dynamic
reconfiguration, preventing the system deadlock that can
occur if AXI transactions are interrupted by DFX.
fpga: Add support for Xilinx LogiCORE PR Decoupler This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24 15:33:21 +00:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
config FPGA_REGION
tristate "FPGA Region"
depends on FPGA_BRIDGE
help
fpga: change FPGA indirect article to an Change use of 'a fpga' to 'an fpga' Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210608212350.3029742-7-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-08 21:23:44 +00:00
FPGA Region common code. An FPGA Region controls an FPGA Manager
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 20:20:27 +00:00
and the FPGA Bridges associated with either a reconfigurable
region of an FPGA or a whole FPGA.
config OF_FPGA_REGION
tristate "FPGA Region Device Tree Overlay Support"
depends on OF && FPGA_REGION
help
Support for loading FPGA images by applying a Device Tree
overlay.
fpga: add device feature list support Device Feature List (DFL) defines a feature list structure that creates a linked list of feature headers within the MMIO space to provide an extensible way of adding features. This patch introduces a kernel module to provide basic infrastructure to support FPGA devices which implement the Device Feature List. Usually there will be different features and their sub features linked into the DFL. This code provides common APIs for feature enumeration, it creates a container device (FPGA base region), walks through the DFLs and creates platform devices for feature devices (Currently it only supports two different feature devices, FPGA Management Engine (FME) and Port which the Accelerator Function Unit (AFU) connected to). In order to enumerate the DFLs, the common APIs required low level driver to provide necessary enumeration information (e.g. address for each device feature list for given device) and fill it to the dfl_fpga_enum_info data structure. Please refer to below description for APIs added for enumeration. Functions for enumeration information preparation: *dfl_fpga_enum_info_alloc allocate enumeration information data structure. *dfl_fpga_enum_info_add_dfl add a device feature list to dfl_fpga_enum_info data structure. *dfl_fpga_enum_info_free free dfl_fpga_enum_info data structure and related resources. Functions for feature device enumeration: *dfl_fpga_feature_devs_enumerate enumerate feature devices and return container device. *dfl_fpga_feature_devs_remove remove feature devices under given container device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:13 +00:00
config FPGA_DFL
tristate "FPGA Device Feature List (DFL) support"
select FPGA_BRIDGE
select FPGA_REGION
fpga: Specify HAS_IOMEM dependency for FPGA_DFL Because dfl.c uses the 'devm_ioremap', 'devm_iounmap', 'devm_ioremap_resource', and 'devm_platform_ioremap_resource' functions, it should depend on HAS_IOMEM. This fixes make allyesconfig under UML (ARCH=um), which doesn't provide HAS_IOMEM. [mdf@kernel.org: Removed "drivers: " in commit message] Fixes: 89eb35e810a8 ("fpga: dfl: map feature mmio resources in their own feature drivers") Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20201122001549.107023-2-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-22 00:15:49 +00:00
depends on HAS_IOMEM
fpga: add device feature list support Device Feature List (DFL) defines a feature list structure that creates a linked list of feature headers within the MMIO space to provide an extensible way of adding features. This patch introduces a kernel module to provide basic infrastructure to support FPGA devices which implement the Device Feature List. Usually there will be different features and their sub features linked into the DFL. This code provides common APIs for feature enumeration, it creates a container device (FPGA base region), walks through the DFLs and creates platform devices for feature devices (Currently it only supports two different feature devices, FPGA Management Engine (FME) and Port which the Accelerator Function Unit (AFU) connected to). In order to enumerate the DFLs, the common APIs required low level driver to provide necessary enumeration information (e.g. address for each device feature list for given device) and fill it to the dfl_fpga_enum_info data structure. Please refer to below description for APIs added for enumeration. Functions for enumeration information preparation: *dfl_fpga_enum_info_alloc allocate enumeration information data structure. *dfl_fpga_enum_info_add_dfl add a device feature list to dfl_fpga_enum_info data structure. *dfl_fpga_enum_info_free free dfl_fpga_enum_info data structure and related resources. Functions for feature device enumeration: *dfl_fpga_feature_devs_enumerate enumerate feature devices and return container device. *dfl_fpga_feature_devs_remove remove feature devices under given container device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:13 +00:00
help
Device Feature List (DFL) defines a feature list structure that
creates a linked list of feature headers within the MMIO space
to provide an extensible way of adding features for FPGA.
Driver can walk through the feature headers to enumerate feature
devices (e.g. FPGA Management Engine, Port and Accelerator
Function Unit) and their private features for target FPGA devices.
Select this option to enable common support for Field-Programmable
Gate Array (FPGA) solutions which implement Device Feature List.
It provides enumeration APIs and feature device infrastructure.
fpga: dfl: add FPGA Management Engine driver basic framework The FPGA Management Engine (FME) provides power, thermal management, performance counters, partial reconfiguration and other functions. For each function, it is packaged into a private feature linked to the FME feature device in the 'Device Feature List'. It's a platform device created by DFL framework. This patch adds the basic framework of FME platform driver. It defines sub feature drivers to handle the different sub features, including init, uinit and ioctl. It also registers the file operations for the device file. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:21 +00:00
config FPGA_DFL_FME
tristate "FPGA DFL FME Driver"
fpga: dfl: fme: add performance reporting support This patch adds support for performance reporting private feature for FPGA Management Engine (FME). Now it supports several different performance counters, including 'basic', 'cache', 'fabric', 'vtd' and 'vtd_sip'. It allows user to use standard linux tools to access these performance counters. e.g. List all events by "perf list" perf list | grep fme dfl_fme0/cache_read_hit/ [Kernel PMU event] dfl_fme0/cache_read_miss/ [Kernel PMU event] ... dfl_fme0/fab_mmio_read/ [Kernel PMU event] dfl_fme0/fab_mmio_write/ [Kernel PMU event] ... dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event] dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event] ... dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event] dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event] ... dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event] dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event] ... dfl_fme0/clock [Kernel PMU event] ... e.g. check increased counter value after run one application using "perf stat" command. perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test Performance counter stats for './test': 1 dfl_fme0/fab_mmio_read/ 2 dfl_fme0/fab_mmio_write/ 1.009496520 seconds time elapsed Please note that fabric counters support both fab_* and fab_port_*, but actually they are sharing one set of performance counters in hardware. If user wants to monitor overall data events on fab_* then fab_port_* can't be supported at the same time, see example below: perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/ Performance counter stats for 'system wide': 0 dfl_fme0/fab_mmio_read/ <not supported> dfl_fme0/fab_port_mmio_write,portid=0/ 2.141064085 seconds time elapsed Signed-off-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 01:06:23 +00:00
depends on FPGA_DFL && HWMON && PERF_EVENTS
fpga: dfl: add FPGA Management Engine driver basic framework The FPGA Management Engine (FME) provides power, thermal management, performance counters, partial reconfiguration and other functions. For each function, it is packaged into a private feature linked to the FME feature device in the 'Device Feature List'. It's a platform device created by DFL framework. This patch adds the basic framework of FME platform driver. It defines sub feature drivers to handle the different sub features, including init, uinit and ioctl. It also registers the file operations for the device file. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:21 +00:00
help
The FPGA Management Engine (FME) is a feature device implemented
under Device Feature List (DFL) framework. Select this option to
enable the platform device driver for FME which implements all
FPGA platform level management features. There shall be one FME
per DFL based FPGA device.
fpga: dfl: add fpga manager platform driver for FME This patch adds fpga manager driver for FPGA Management Engine (FME). It implements fpga_manager_ops for FPGA Partial Reconfiguration function. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:25 +00:00
config FPGA_DFL_FME_MGR
tristate "FPGA DFL FME Manager Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Manager driver for FPGA Management Engine.
fpga: dfl: add fpga bridge platform driver for FME This patch adds fpga bridge platform driver for FPGA Management Engine. It implements the enable_set callback for fpga bridge. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:27 +00:00
config FPGA_DFL_FME_BRIDGE
tristate "FPGA DFL FME Bridge Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Bridge driver for FPGA Management Engine.
fpga: dfl: add fpga region platform driver for FME This patch adds fpga region platform driver for FPGA Management Engine. It register an fpga region with given fpga manager / bridge device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:28 +00:00
config FPGA_DFL_FME_REGION
tristate "FPGA DFL FME Region Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Region driver for FPGA Management Engine.
fpga: dfl: add FPGA Accelerated Function Unit driver basic framework On DFL FPGA devices, the Accelerated Function Unit (AFU), can be reprogrammed for different functions. It connects to the FPGA infrastructure (static FPGA region) via a Port. Port CSRs are implemented separately from the AFU CSRs to provide control and status of the Port. Once valid PR bitstream is programmed into the AFU, it allows access to the AFU CSRs in the AFU MMIO space. This patch only implements basic driver framework for AFU, including device file operation framework. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:30 +00:00
config FPGA_DFL_AFU
tristate "FPGA DFL AFU Driver"
depends on FPGA_DFL
help
This is the driver for FPGA Accelerated Function Unit (AFU) which
implements AFU and Port management features. A User AFU connects
to the FPGA infrastructure via a Port. There may be more than one
Port/AFU per DFL based FPGA device.
fpga: dfl: add support for N3000 Nios private feature This patch adds support for the Nios handshake private feature on Intel PAC (Programmable Acceleration Card) N3000. The Nios is the embedded processor on the FPGA card. This private feature provides a handshake interface to FPGA Nios firmware, which receives retimer configuration command from host and executes via an internal SPI master (spi-altera). When Nios finishes the configuration, host takes over the ownership of the SPI master to control an Intel MAX10 BMC (Board Management Controller) Chip on the SPI bus. For Nios firmware handshake part, this driver requests the retimer configuration for Nios firmware on probe, and adds some sysfs nodes for user to query the onboard retimer's working mode and Nios firmware version. For SPI part, this driver adds a spi-altera platform device as well as the MAX10 BMC spi slave info. A spi-altera driver will be matched to handle the following SPI work. [mdf@kernel.org: Fixed up ABI doc kernel release] Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210107043714.991646-8-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 04:37:13 +00:00
config FPGA_DFL_NIOS_INTEL_PAC_N3000
tristate "FPGA DFL NIOS Driver for Intel PAC N3000"
depends on FPGA_DFL
select REGMAP
help
This is the driver for the N3000 Nios private feature on Intel
PAC (Programmable Acceleration Card) N3000. It communicates
with the embedded Nios processor to configure the retimers on
the card. It also instantiates the SPI master (spi-altera) for
the card's BMC (Board Management Controller).
fpga: add FPGA DFL PCIe device driver This patch implements the basic framework of the driver for FPGA PCIe device which implements the Device Feature List (DFL) in its MMIO space. This driver is verified on Intel(R) PCIe-based FPGA DFL devices, including both integrated (e.g. Intel Server Platform with In-package FPGA) and discrete (e.g. Intel FPGA PCIe Acceleration Cards) solutions. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 00:53:19 +00:00
config FPGA_DFL_PCI
tristate "FPGA DFL PCIe Device Driver"
depends on PCI && FPGA_DFL
help
Select this option to enable PCIe driver for PCIe-based
Field-Programmable Gate Array (FPGA) solutions which implement
the Device Feature List (DFL). This driver provides interfaces
for userspace applications to configure, enumerate, open and access
FPGA accelerators on the FPGA DFL devices, enables system level
management functions such as FPGA partial reconfiguration, power
management and virtualization with DFL framework and DFL feature
device drivers.
To compile this as a module, choose M here.
fpga manager: Adding FPGA Manager support for Xilinx zynqmp This patch adds FPGA Manager support for the Xilinx ZynqMP chip. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15 07:17:48 +00:00
config FPGA_MGR_ZYNQMP_FPGA
tristate "Xilinx ZynqMP FPGA"
fpga: zynqmp: fix modular build Two symbols need to be exported to allow the zynqmp-fpga module to get loaded dynamically: ERROR: modpost: "zynqmp_pm_fpga_load" [drivers/fpga/zynqmp-fpga.ko] undefined! ERROR: modpost: "zynqmp_pm_fpga_get_status" [drivers/fpga/zynqmp-fpga.ko] undefined! To ensure this is done correctly, also fix the Kconfig dependency to only allow building the fpga driver when the firmware driver is either disabled, or when it is reachable. With that, the dependency on the SoC itself can be removed, and there are no surprises when the fpga driver is built-in but the firmware a module. Fixes: 4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2020-05-05 14:00:11 +00:00
depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST)
fpga manager: Adding FPGA Manager support for Xilinx zynqmp This patch adds FPGA Manager support for the Xilinx ZynqMP chip. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15 07:17:48 +00:00
help
FPGA manager driver support for Xilinx ZynqMP FPGAs.
This driver uses the processor configuration port(PCAP)
to configure the programmable logic(PL) through PS
on ZynqMP SoC.
fpga: versal-fpga: Add versal fpga manager driver Add support for Xilinx Versal FPGA manager. PDI source type can be DDR, OCM, QSPI flash etc.. But driver allocates memory always from DDR, Since driver supports only DDR source type. Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Link: https://lore.kernel.org/r/20210626155248.5004-6-nava.manne@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-26 15:52:48 +00:00
config FPGA_MGR_VERSAL_FPGA
tristate "Xilinx Versal FPGA"
depends on ARCH_ZYNQMP || COMPILE_TEST
help
Select this option to enable FPGA manager driver support for
Xilinx Versal SoC. This driver uses the firmware interface to
configure the programmable logic(PL).
To compile this as a module, choose M here.
fpga: m10bmc-sec: create max10 bmc secure update Create a sub-driver for the FPGA Card BMC in order to support secure updates. This patch creates the Max10 BMC Secure Update driver and provides sysfs files for displaying the root entry hashes (REH) for the FPGA static region (SR), the FPGA Partial Reconfiguration (PR) region, and the card BMC. The Intel MAX10 BMC Root of Trust (RoT) requires that all BMC Nios firmware and FPGA images are authenticated using ECDSA before loading and executing on the card. Code Signing Keys (CSK) are used to sign images. CSKs are signed by a root key. The root entry hash is created from the root public key. The RoT provides authentication by storing an REH bitstream to a write-once location. Image signatures are verified against the hash. Reviewed-by: Tom Rix <trix@redhat.com> Tested-by: Tianfei Zhang <tianfei.zhang@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20220606160038.846236-3-russell.h.weight@intel.com Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2022-06-06 16:00:35 +00:00
config FPGA_M10_BMC_SEC_UPDATE
tristate "Intel MAX10 BMC Secure Update driver"
mfd: intel-m10-bmc: Split into core and spi specific parts Split the common code from intel-m10-bmc driver into intel-m10-bmc-core and move the SPI bus parts into an interface specific file. intel-m10-bmc-core becomes the core MFD functions which can support multiple bus interface like SPI bus. Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com> Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com> Reviewed-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> # hwmon Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230116100845.6153-5-ilpo.jarvinen@linux.intel.com
2023-01-16 10:08:38 +00:00
depends on MFD_INTEL_M10_BMC_CORE
fpga: m10bmc-sec: Fix kconfig dependencies The secure update driver depends on the firmware-upload functionality of the firmware-loader. The firmware-loader is carried in the firmware-class driver which is enabled with the tristate CONFIG_FW_LOADER option. The firmware-upload functionality is included in the firmware-class driver if the bool FW_UPLOAD config is set. The current dependency statement, "depends on FW_UPLOAD", is not adequate because it does not implicitly turn on FW_LOADER. Instead of adding a dependency, follow the convention used by drivers that require the FW_LOADER_USER_HELPER functionality of the firmware-loader by using select for both FW_LOADER and FW_UPLOAD. Fixes: bdf86d0e6ca3 ("fpga: m10bmc-sec: create max10 bmc secure update") Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20221115001127.289890-1-russell.h.weight@intel.com Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2022-11-15 00:11:27 +00:00
select FW_LOADER
select FW_UPLOAD
fpga: m10bmc-sec: create max10 bmc secure update Create a sub-driver for the FPGA Card BMC in order to support secure updates. This patch creates the Max10 BMC Secure Update driver and provides sysfs files for displaying the root entry hashes (REH) for the FPGA static region (SR), the FPGA Partial Reconfiguration (PR) region, and the card BMC. The Intel MAX10 BMC Root of Trust (RoT) requires that all BMC Nios firmware and FPGA images are authenticated using ECDSA before loading and executing on the card. Code Signing Keys (CSK) are used to sign images. CSKs are signed by a root key. The root entry hash is created from the root public key. The RoT provides authentication by storing an REH bitstream to a write-once location. Image signatures are verified against the hash. Reviewed-by: Tom Rix <trix@redhat.com> Tested-by: Tianfei Zhang <tianfei.zhang@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20220606160038.846236-3-russell.h.weight@intel.com Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2022-06-06 16:00:35 +00:00
help
Secure update support for the Intel MAX10 board management
controller.
This is a subdriver of the Intel MAX10 board management controller
(BMC) and provides support for secure updates for the BMC image,
the FPGA image, the Root Entry Hashes, etc.
fpga: microchip-spi: add Microchip MPF FPGA manager Add support to the FPGA manager for programming Microchip Polarfire FPGAs over slave SPI interface with .dat formatted bitsream image. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20220623163248.3672-4-i.bornyakov@metrotek.ru Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2022-06-23 16:32:46 +00:00
config FPGA_MGR_MICROCHIP_SPI
tristate "Microchip Polarfire SPI FPGA manager"
depends on SPI
help
FPGA manager driver support for Microchip Polarfire FPGAs
programming over slave SPI interface with .dat formatted
bitstream image.
fpga: lattice-sysconfig-spi: add Lattice sysCONFIG FPGA manager Add support to the FPGA manager for programming Lattice ECP5 FPGA over slave SPI sysCONFIG interface. sysCONFIG interface core functionality is separate from both ECP5 and SPI specifics, so support for other FPGAs with different port types can be added in the future. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20221025053947.2737-2-i.bornyakov@metrotek.ru [yilun.xu@intel.com: remove redundant blank line after kmemdup] Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2022-10-25 05:39:46 +00:00
config FPGA_MGR_LATTICE_SYSCONFIG
tristate
config FPGA_MGR_LATTICE_SYSCONFIG_SPI
tristate "Lattice sysCONFIG SPI FPGA manager"
depends on SPI
select FPGA_MGR_LATTICE_SYSCONFIG
help
FPGA manager driver support for Lattice FPGAs programming over slave
SPI sysCONFIG interface.
fpga: add configuration for the FPGA KUnit test suites. Add configuration for the KUnit test suites for the core components of the FPGA subsystem. Signed-off-by: Marco Pagani <marpagan@redhat.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20230718130304.87048-5-marpagan@redhat.com Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2023-07-18 13:03:04 +00:00
source "drivers/fpga/tests/Kconfig"
fpga manager: add driver for socfpga fpga manager Add driver to fpga manager framework to allow configuration of FPGA in Altera SoCFPGA parts. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 15:36:29 +00:00
endif # FPGA
Reference in New Issue Copy Permalink