Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-22 04:02:20 +00:00
Code Issues Packages Projects Releases Wiki Activity
89c45f3823
linux/io_uring/opdef.c

778 lines
16 KiB
C
Raw Normal View History

io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* io_uring opcode handling table
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/io_uring.h>
#include "io_uring.h"
#include "opdef.h"
#include "refs.h"
#include "tctx.h"
#include "sqpoll.h"
#include "fdinfo.h"
#include "kbuf.h"
#include "rsrc.h"
#include "xattr.h"
#include "nop.h"
#include "fs.h"
#include "splice.h"
#include "sync.h"
#include "advise.h"
#include "openclose.h"
#include "uring_cmd.h"
#include "epoll.h"
#include "statx.h"
#include "net.h"
#include "msg_ring.h"
#include "timeout.h"
#include "poll.h"
#include "cancel.h"
#include "rw.h"
io_uring: add IORING_OP_WAITID support This adds support for an async version of waitid(2), in a fully async version. If an event isn't immediately available, wait for a callback to trigger a retry. The format of the sqe is as follows: sqe->len The 'which', the idtype being queried/waited for. sqe->fd The 'pid' (or id) being waited for. sqe->file_index The 'options' being set. sqe->addr2 A pointer to siginfo_t, if any, being filled in. buf_index, add3, and waitid_flags are reserved/unused for now. waitid_flags will be used for options for this request type. One interesting use case may be to add multi-shot support, so that the request stays armed and posts a notification every time a monitored process state change occurs. Note that this does not support rusage, on Arnd's recommendation. See the waitid(2) man page for details on the arguments. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-10 22:14:37 +00:00
#include "waitid.h"
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
#include "futex.h"
io_uring: add support for ftruncate Adds support for doing truncate through io_uring, eliminating the need for applications to roll their own thread pool or offload mechanism to be able to do non-blocking truncates. Signed-off-by: Tony Solomonik <tony.solomonik@gmail.com> Link: https://lore.kernel.org/r/20240202121724.17461-3-tony.solomonik@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-02 12:17:24 +00:00
#include "truncate.h"
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
static int io_no_issue(struct io_kiocb *req, unsigned int issue_flags)
{
WARN_ON_ONCE(1);
return -ECANCELED;
}
static __maybe_unused int io_eopnotsupp_prep(struct io_kiocb *kiocb,
const struct io_uring_sqe *sqe)
{
return -EOPNOTSUPP;
}
io_uring: Rename struct io_op_def The current io_op_def struct is becoming huge and the name is a bit generic. The goal of this patch is to rename this struct to `io_issue_def`. This struct will contain the hot functions associated with the issue code path. For now, this patch only renames the structure, and an upcoming patch will break up the structure in two, moving the non-issue fields to a secondary struct. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:10 +00:00
const struct io_issue_def io_issue_defs[] = {
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
[IORING_OP_NOP] = {
.audit_skip = 1,
.iopoll = 1,
.prep = io_nop_prep,
.issue = io_nop,
},
[IORING_OP_READV] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
io_uring: dont remove file from msg_ring reqs We should not be messing with req->file outside of core paths. Clearing it makes msg_ring non reentrant, i.e. luckily io_msg_send_fd() fails the request on failed io_double_lock_ctx() but clearly was originally intended to do retries instead. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e5ac9edadb574fe33f6d727cb8f14ce68262a684.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-07 03:53:26 +00:00
.iopoll_queue = 1,
io_uring/rw: mark readv/writev as vectored in the opcode definition This is cleaner than gating on the opcode type, particularly as more read/write type opcodes may be added. Then we can use that for the data import, and for __io_read() on whether or not we need to copy state. Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-11 19:46:07 +00:00
.vectored = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_rw),
io_uring/rw: always setup io_async_rw for read/write requests read/write requests try to put everything on the stack, and then alloc and copy if a retry is needed. This necessitates a bunch of nasty code that deals with intermediate state. Get rid of this, and have the prep side setup everything that is needed upfront, which greatly simplifies the opcode handlers. This includes adding an alloc cache for io_async_rw, to make it cheap to handle. In terms of cost, this should be basically free and transparent. For the worst case of {READ,WRITE}_FIXED which didn't need it before, performance is unaffected in the normal peak workload that is being used to test that. Still runs at 122M IOPS. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-18 22:13:01 +00:00
.prep = io_prep_readv,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.issue = io_read,
},
[IORING_OP_WRITEV] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
io_uring: dont remove file from msg_ring reqs We should not be messing with req->file outside of core paths. Clearing it makes msg_ring non reentrant, i.e. luckily io_msg_send_fd() fails the request on failed io_double_lock_ctx() but clearly was originally intended to do retries instead. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e5ac9edadb574fe33f6d727cb8f14ce68262a684.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-07 03:53:26 +00:00
.iopoll_queue = 1,
io_uring/rw: mark readv/writev as vectored in the opcode definition This is cleaner than gating on the opcode type, particularly as more read/write type opcodes may be added. Then we can use that for the data import, and for __io_read() on whether or not we need to copy state. Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-11 19:46:07 +00:00
.vectored = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_rw),
io_uring/rw: always setup io_async_rw for read/write requests read/write requests try to put everything on the stack, and then alloc and copy if a retry is needed. This necessitates a bunch of nasty code that deals with intermediate state. Get rid of this, and have the prep side setup everything that is needed upfront, which greatly simplifies the opcode handlers. This includes adding an alloc cache for io_async_rw, to make it cheap to handle. In terms of cost, this should be basically free and transparent. For the worst case of {READ,WRITE}_FIXED which didn't need it before, performance is unaffected in the normal peak workload that is being used to test that. Still runs at 122M IOPS. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-18 22:13:01 +00:00
.prep = io_prep_writev,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.issue = io_write,
},
[IORING_OP_FSYNC] = {
.needs_file = 1,
.audit_skip = 1,
.prep = io_fsync_prep,
.issue = io_fsync,
},
[IORING_OP_READ_FIXED] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
io_uring: dont remove file from msg_ring reqs We should not be messing with req->file outside of core paths. Clearing it makes msg_ring non reentrant, i.e. luckily io_msg_send_fd() fails the request on failed io_double_lock_ctx() but clearly was originally intended to do retries instead. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e5ac9edadb574fe33f6d727cb8f14ce68262a684.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-07 03:53:26 +00:00
.iopoll_queue = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_rw),
io_uring/rw: always setup io_async_rw for read/write requests read/write requests try to put everything on the stack, and then alloc and copy if a retry is needed. This necessitates a bunch of nasty code that deals with intermediate state. Get rid of this, and have the prep side setup everything that is needed upfront, which greatly simplifies the opcode handlers. This includes adding an alloc cache for io_async_rw, to make it cheap to handle. In terms of cost, this should be basically free and transparent. For the worst case of {READ,WRITE}_FIXED which didn't need it before, performance is unaffected in the normal peak workload that is being used to test that. Still runs at 122M IOPS. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-18 22:13:01 +00:00
.prep = io_prep_read_fixed,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.issue = io_read,
},
[IORING_OP_WRITE_FIXED] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
io_uring: dont remove file from msg_ring reqs We should not be messing with req->file outside of core paths. Clearing it makes msg_ring non reentrant, i.e. luckily io_msg_send_fd() fails the request on failed io_double_lock_ctx() but clearly was originally intended to do retries instead. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e5ac9edadb574fe33f6d727cb8f14ce68262a684.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-07 03:53:26 +00:00
.iopoll_queue = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_rw),
io_uring/rw: always setup io_async_rw for read/write requests read/write requests try to put everything on the stack, and then alloc and copy if a retry is needed. This necessitates a bunch of nasty code that deals with intermediate state. Get rid of this, and have the prep side setup everything that is needed upfront, which greatly simplifies the opcode handlers. This includes adding an alloc cache for io_async_rw, to make it cheap to handle. In terms of cost, this should be basically free and transparent. For the worst case of {READ,WRITE}_FIXED which didn't need it before, performance is unaffected in the normal peak workload that is being used to test that. Still runs at 122M IOPS. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-18 22:13:01 +00:00
.prep = io_prep_write_fixed,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.issue = io_write,
},
[IORING_OP_POLL_ADD] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.audit_skip = 1,
.prep = io_poll_add_prep,
.issue = io_poll_add,
},
[IORING_OP_POLL_REMOVE] = {
.audit_skip = 1,
.prep = io_poll_remove_prep,
.issue = io_poll_remove,
},
[IORING_OP_SYNC_FILE_RANGE] = {
.needs_file = 1,
.audit_skip = 1,
.prep = io_sfr_prep,
.issue = io_sync_file_range,
},
[IORING_OP_SENDMSG] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.ioprio = 1,
#if defined(CONFIG_NET)
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_msghdr),
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_sendmsg_prep,
.issue = io_sendmsg,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_RECVMSG] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.ioprio = 1,
#if defined(CONFIG_NET)
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_msghdr),
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_recvmsg_prep,
.issue = io_recvmsg,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_TIMEOUT] = {
.audit_skip = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_timeout_data),
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_timeout_prep,
.issue = io_timeout,
},
[IORING_OP_TIMEOUT_REMOVE] = {
/* used by timeout updates' prep() */
.audit_skip = 1,
.prep = io_timeout_remove_prep,
.issue = io_timeout_remove,
},
[IORING_OP_ACCEPT] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.poll_exclusive = 1,
.ioprio = 1, /* used for flags */
#if defined(CONFIG_NET)
.prep = io_accept_prep,
.issue = io_accept,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_ASYNC_CANCEL] = {
.audit_skip = 1,
.prep = io_async_cancel_prep,
.issue = io_async_cancel,
},
[IORING_OP_LINK_TIMEOUT] = {
.audit_skip = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_timeout_data),
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_link_timeout_prep,
.issue = io_no_issue,
},
[IORING_OP_CONNECT] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
#if defined(CONFIG_NET)
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_msghdr),
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_connect_prep,
.issue = io_connect,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_FALLOCATE] = {
.needs_file = 1,
.prep = io_fallocate_prep,
.issue = io_fallocate,
},
[IORING_OP_OPENAT] = {
.prep = io_openat_prep,
.issue = io_openat,
},
[IORING_OP_CLOSE] = {
.prep = io_close_prep,
.issue = io_close,
},
Revert "io_uring: rename IORING_OP_FILES_UPDATE" This reverts commit 4379d5f15b3fd4224c37841029178aa8082a242e. We removed notification flushing, also cleanup uapi preparation changes to not pollute it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/89edc3905350f91e1b6e26d9dbf42ee44fd451a2.1662027856.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-01 10:54:02 +00:00
[IORING_OP_FILES_UPDATE] = {
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.audit_skip = 1,
.iopoll = 1,
Revert "io_uring: rename IORING_OP_FILES_UPDATE" This reverts commit 4379d5f15b3fd4224c37841029178aa8082a242e. We removed notification flushing, also cleanup uapi preparation changes to not pollute it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/89edc3905350f91e1b6e26d9dbf42ee44fd451a2.1662027856.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-01 10:54:02 +00:00
.prep = io_files_update_prep,
.issue = io_files_update,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
},
[IORING_OP_STATX] = {
.audit_skip = 1,
.prep = io_statx_prep,
.issue = io_statx,
},
[IORING_OP_READ] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
io_uring: dont remove file from msg_ring reqs We should not be messing with req->file outside of core paths. Clearing it makes msg_ring non reentrant, i.e. luckily io_msg_send_fd() fails the request on failed io_double_lock_ctx() but clearly was originally intended to do retries instead. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e5ac9edadb574fe33f6d727cb8f14ce68262a684.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-07 03:53:26 +00:00
.iopoll_queue = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_rw),
io_uring/rw: always setup io_async_rw for read/write requests read/write requests try to put everything on the stack, and then alloc and copy if a retry is needed. This necessitates a bunch of nasty code that deals with intermediate state. Get rid of this, and have the prep side setup everything that is needed upfront, which greatly simplifies the opcode handlers. This includes adding an alloc cache for io_async_rw, to make it cheap to handle. In terms of cost, this should be basically free and transparent. For the worst case of {READ,WRITE}_FIXED which didn't need it before, performance is unaffected in the normal peak workload that is being used to test that. Still runs at 122M IOPS. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-18 22:13:01 +00:00
.prep = io_prep_read,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.issue = io_read,
},
[IORING_OP_WRITE] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
io_uring: dont remove file from msg_ring reqs We should not be messing with req->file outside of core paths. Clearing it makes msg_ring non reentrant, i.e. luckily io_msg_send_fd() fails the request on failed io_double_lock_ctx() but clearly was originally intended to do retries instead. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e5ac9edadb574fe33f6d727cb8f14ce68262a684.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-07 03:53:26 +00:00
.iopoll_queue = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_rw),
io_uring/rw: always setup io_async_rw for read/write requests read/write requests try to put everything on the stack, and then alloc and copy if a retry is needed. This necessitates a bunch of nasty code that deals with intermediate state. Get rid of this, and have the prep side setup everything that is needed upfront, which greatly simplifies the opcode handlers. This includes adding an alloc cache for io_async_rw, to make it cheap to handle. In terms of cost, this should be basically free and transparent. For the worst case of {READ,WRITE}_FIXED which didn't need it before, performance is unaffected in the normal peak workload that is being used to test that. Still runs at 122M IOPS. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-18 22:13:01 +00:00
.prep = io_prep_write,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.issue = io_write,
},
[IORING_OP_FADVISE] = {
.needs_file = 1,
.audit_skip = 1,
.prep = io_fadvise_prep,
.issue = io_fadvise,
},
[IORING_OP_MADVISE] = {
io_uring,audit: don't log IORING_OP_MADVISE fadvise and madvise both provide hints for caching or access pattern for file and memory respectively. Skip them. Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring") Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Link: https://lore.kernel.org/r/b5dfdcd541115c86dbc774aa9dd502c964849c5f.1675282642.git.rgb@redhat.com Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-01 20:33:33 +00:00
.audit_skip = 1,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_madvise_prep,
.issue = io_madvise,
},
[IORING_OP_SEND] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.audit_skip = 1,
.ioprio = 1,
io_uring/net: add provided buffer support for IORING_OP_SEND It's pretty trivial to wire up provided buffer support for the send side, just like how it's done the receive side. This enables setting up a buffer ring that an application can use to push pending sends to, and then have a send pick a buffer from that ring. One of the challenges with async IO and networking sends is that you can get into reordering conditions if you have more than one inflight at the same time. Consider the following scenario where everything is fine: 1) App queues sendA for socket1 2) App queues sendB for socket1 3) App does io_uring_submit() 4) sendA is issued, completes successfully, posts CQE 5) sendB is issued, completes successfully, posts CQE All is fine. Requests are always issued in-order, and both complete inline as most sends do. However, if we're flooding socket1 with sends, the following could also result from the same sequence: 1) App queues sendA for socket1 2) App queues sendB for socket1 3) App does io_uring_submit() 4) sendA is issued, socket1 is full, poll is armed for retry 5) Space frees up in socket1, this triggers sendA retry via task_work 6) sendB is issued, completes successfully, posts CQE 7) sendA is retried, completes successfully, posts CQE Now we've sent sendB before sendA, which can make things unhappy. If both sendA and sendB had been using provided buffers, then it would look as follows instead: 1) App queues dataA for sendA, queues sendA for socket1 2) App queues dataB for sendB queues sendB for socket1 3) App does io_uring_submit() 4) sendA is issued, socket1 is full, poll is armed for retry 5) Space frees up in socket1, this triggers sendA retry via task_work 6) sendB is issued, picks first buffer (dataA), completes successfully, posts CQE (which says "I sent dataA") 7) sendA is retried, picks first buffer (dataB), completes successfully, posts CQE (which says "I sent dataB") Now we've sent the data in order, and everybody is happy. It's worth noting that this also opens the door for supporting multishot sends, as provided buffers would be a prerequisite for that. Those can trigger either when new buffers are added to the outgoing ring, or (if stalled due to lack of space) when space frees up in the socket. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-19 17:46:44 +00:00
.buffer_select = 1,
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
#if defined(CONFIG_NET)
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_msghdr),
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_sendmsg_prep,
.issue = io_send,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_RECV] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.audit_skip = 1,
.ioprio = 1,
#if defined(CONFIG_NET)
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_msghdr),
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_recvmsg_prep,
.issue = io_recv,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_OPENAT2] = {
.prep = io_openat2_prep,
.issue = io_openat2,
},
[IORING_OP_EPOLL_CTL] = {
.unbound_nonreg_file = 1,
.audit_skip = 1,
#if defined(CONFIG_EPOLL)
.prep = io_epoll_ctl_prep,
.issue = io_epoll_ctl,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_SPLICE] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.audit_skip = 1,
.prep = io_splice_prep,
.issue = io_splice,
},
[IORING_OP_PROVIDE_BUFFERS] = {
.audit_skip = 1,
.iopoll = 1,
.prep = io_provide_buffers_prep,
.issue = io_provide_buffers,
},
[IORING_OP_REMOVE_BUFFERS] = {
.audit_skip = 1,
.iopoll = 1,
.prep = io_remove_buffers_prep,
.issue = io_remove_buffers,
},
[IORING_OP_TEE] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.audit_skip = 1,
.prep = io_tee_prep,
.issue = io_tee,
},
[IORING_OP_SHUTDOWN] = {
.needs_file = 1,
#if defined(CONFIG_NET)
.prep = io_shutdown_prep,
.issue = io_shutdown,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_RENAMEAT] = {
.prep = io_renameat_prep,
.issue = io_renameat,
},
[IORING_OP_UNLINKAT] = {
.prep = io_unlinkat_prep,
.issue = io_unlinkat,
},
[IORING_OP_MKDIRAT] = {
.prep = io_mkdirat_prep,
.issue = io_mkdirat,
},
[IORING_OP_SYMLINKAT] = {
.prep = io_symlinkat_prep,
.issue = io_symlinkat,
},
[IORING_OP_LINKAT] = {
.prep = io_linkat_prep,
.issue = io_linkat,
},
[IORING_OP_MSG_RING] = {
.needs_file = 1,
.iopoll = 1,
.prep = io_msg_ring_prep,
.issue = io_msg_ring,
},
[IORING_OP_FSETXATTR] = {
.needs_file = 1,
.prep = io_fsetxattr_prep,
.issue = io_fsetxattr,
},
[IORING_OP_SETXATTR] = {
.prep = io_setxattr_prep,
.issue = io_setxattr,
},
[IORING_OP_FGETXATTR] = {
.needs_file = 1,
.prep = io_fgetxattr_prep,
.issue = io_fgetxattr,
},
[IORING_OP_GETXATTR] = {
.prep = io_getxattr_prep,
.issue = io_getxattr,
},
[IORING_OP_SOCKET] = {
.audit_skip = 1,
#if defined(CONFIG_NET)
.prep = io_socket_prep,
.issue = io_socket,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_URING_CMD] = {
.needs_file = 1,
.plug = 1,
io_uring: add iopoll infrastructure for io_uring_cmd Put this up in the same way as iopoll is done for regular read/write IO. Make place for storing a cookie into struct io_uring_cmd on submission. Perform the completion using the ->uring_cmd_iopoll handler. Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20220823161443.49436-3-joshi.k@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-23 16:14:41 +00:00
.iopoll = 1,
io_uring: dont remove file from msg_ring reqs We should not be messing with req->file outside of core paths. Clearing it makes msg_ring non reentrant, i.e. luckily io_msg_send_fd() fails the request on failed io_double_lock_ctx() but clearly was originally intended to do retries instead. Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e5ac9edadb574fe33f6d727cb8f14ce68262a684.1670384893.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-07 03:53:26 +00:00
.iopoll_queue = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = 2 * sizeof(struct io_uring_sqe),
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
.prep = io_uring_cmd_prep,
.issue = io_uring_cmd,
},
io_uring/net: simplify zerocopy send user API Following user feedback, this patch simplifies zerocopy send API. One of the main complaints is that the current API is difficult with the userspace managing notification slots, and then send retries with error handling make it even worse. Instead of keeping notification slots change it to the per-request notifications model, which posts both completion and notification CQEs for each request when any data has been sent, and only one CQE if it fails. All notification CQEs will have IORING_CQE_F_NOTIF set and IORING_CQE_F_MORE in completion CQEs indicates whether to wait a notification or not. IOSQE_CQE_SKIP_SUCCESS is disallowed with zerocopy sends for now. This is less flexible, but greatly simplifies the user API and also the kernel implementation. We reuse notif helpers in this patch, but in the future there won't be need for keeping two requests. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/95287640ab98fc9417370afb16e310677c63e6ce.1662027856.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-01 10:54:04 +00:00
[IORING_OP_SEND_ZC] = {
io_uring: wire send zc request type Add a new io_uring opcode IORING_OP_SENDZC. The main distinction from IORING_OP_SEND is that the user should specify a notification slot index in sqe::notification_idx and the buffers are safe to reuse only when the used notification is flushed and completes. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a80387c6a68ce9cf99b3b6ef6f71068468761fb7.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-12 20:52:43 +00:00
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.audit_skip = 1,
.ioprio = 1,
#if defined(CONFIG_NET)
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_msghdr),
io_uring/net: rename io_sendzc() Simple renaming of io_sendzc*() functions in preparatio to adding a zerocopy sendmsg variant. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/265af46829e6076dd220011b1858dc3151969226.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21 11:17:52 +00:00
.prep = io_send_zc_prep,
.issue = io_send_zc,
io_uring: wire send zc request type Add a new io_uring opcode IORING_OP_SENDZC. The main distinction from IORING_OP_SEND is that the user should specify a notification slot index in sqe::notification_idx and the buffers are safe to reuse only when the used notification is flushed and completes. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a80387c6a68ce9cf99b3b6ef6f71068468761fb7.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-12 20:52:43 +00:00
#else
.prep = io_eopnotsupp_prep,
io_uring/net: zerocopy sendmsg Add a zerocopy version of sendmsg. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6aabc4bdfc0ec78df6ec9328137e394af9d4e7ef.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21 11:17:54 +00:00
#endif
},
[IORING_OP_SENDMSG_ZC] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.ioprio = 1,
#if defined(CONFIG_NET)
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_msghdr),
io_uring/net: zerocopy sendmsg Add a zerocopy version of sendmsg. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6aabc4bdfc0ec78df6ec9328137e394af9d4e7ef.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21 11:17:54 +00:00
.prep = io_send_zc_prep,
.issue = io_sendmsg_zc,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
#else
.prep = io_eopnotsupp_prep,
#endif
},
io_uring/rw: add support for IORING_OP_READ_MULTISHOT This behaves like IORING_OP_READ, except: 1) It only supports pollable files (eg pipes, sockets, etc). Note that for sockets, you probably want to use recv/recvmsg with multishot instead. 2) It supports multishot mode, meaning it will repeatedly trigger a read and fill a buffer when data is available. This allows similar use to recv/recvmsg but on non-sockets, where a single request will repeatedly post a CQE whenever data is read from it. 3) Because of #2, it must be used with provided buffers. This is uniformly true across any request type that supports multishot and transfers data, with the reason being that it's obviously not possible to pass in a single buffer for the data, as multiple reads may very well trigger before an application has a chance to process previous CQEs and the data passed from them. Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-11 19:35:42 +00:00
[IORING_OP_READ_MULTISHOT] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.audit_skip = 1,
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_async_rw),
io_uring/rw: add support for IORING_OP_READ_MULTISHOT This behaves like IORING_OP_READ, except: 1) It only supports pollable files (eg pipes, sockets, etc). Note that for sockets, you probably want to use recv/recvmsg with multishot instead. 2) It supports multishot mode, meaning it will repeatedly trigger a read and fill a buffer when data is available. This allows similar use to recv/recvmsg but on non-sockets, where a single request will repeatedly post a CQE whenever data is read from it. 3) Because of #2, it must be used with provided buffers. This is uniformly true across any request type that supports multishot and transfers data, with the reason being that it's obviously not possible to pass in a single buffer for the data, as multiple reads may very well trigger before an application has a chance to process previous CQEs and the data passed from them. Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-11 19:35:42 +00:00
.prep = io_read_mshot_prep,
.issue = io_read_mshot,
},
io_uring: add IORING_OP_WAITID support This adds support for an async version of waitid(2), in a fully async version. If an event isn't immediately available, wait for a callback to trigger a retry. The format of the sqe is as follows: sqe->len The 'which', the idtype being queried/waited for. sqe->fd The 'pid' (or id) being waited for. sqe->file_index The 'options' being set. sqe->addr2 A pointer to siginfo_t, if any, being filled in. buf_index, add3, and waitid_flags are reserved/unused for now. waitid_flags will be used for options for this request type. One interesting use case may be to add multi-shot support, so that the request stays armed and posts a notification every time a monitored process state change occurs. Note that this does not support rusage, on Arnd's recommendation. See the waitid(2) man page for details on the arguments. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-10 22:14:37 +00:00
[IORING_OP_WAITID] = {
io_uring: drop ->prep_async() It's now unused, drop the code related to it. This includes the io_issue_defs->manual alloc field. While in there, and since ->async_size is now being used a bit more frequently and in the issue path, move it to io_issue_defs[]. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-19 02:48:38 +00:00
.async_size = sizeof(struct io_waitid_async),
io_uring: add IORING_OP_WAITID support This adds support for an async version of waitid(2), in a fully async version. If an event isn't immediately available, wait for a callback to trigger a retry. The format of the sqe is as follows: sqe->len The 'which', the idtype being queried/waited for. sqe->fd The 'pid' (or id) being waited for. sqe->file_index The 'options' being set. sqe->addr2 A pointer to siginfo_t, if any, being filled in. buf_index, add3, and waitid_flags are reserved/unused for now. waitid_flags will be used for options for this request type. One interesting use case may be to add multi-shot support, so that the request stays armed and posts a notification every time a monitored process state change occurs. Note that this does not support rusage, on Arnd's recommendation. See the waitid(2) man page for details on the arguments. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-10 22:14:37 +00:00
.prep = io_waitid_prep,
.issue = io_waitid,
},
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
[IORING_OP_FUTEX_WAIT] = {
#if defined(CONFIG_FUTEX)
.prep = io_futex_prep,
.issue = io_futex_wait,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_FUTEX_WAKE] = {
#if defined(CONFIG_FUTEX)
.prep = io_futex_prep,
.issue = io_futex_wake,
#else
.prep = io_eopnotsupp_prep,
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
#endif
},
[IORING_OP_FUTEX_WAITV] = {
#if defined(CONFIG_FUTEX)
.prep = io_futexv_prep,
.issue = io_futexv_wait,
#else
.prep = io_eopnotsupp_prep,
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
#endif
},
io_uring/openclose: add support for IORING_OP_FIXED_FD_INSTALL io_uring can currently open/close regular files or fixed/direct descriptors. Or you can instantiate a fixed descriptor from a regular one, and then close the regular descriptor. But you currently can't turn a purely fixed/direct descriptor into a regular file descriptor. IORING_OP_FIXED_FD_INSTALL adds support for installing a direct descriptor into the normal file table, just like receiving a file descriptor or opening a new file would do. This is all nicely abstracted into receive_fd(), and hence adding support for this is truly trivial. Since direct descriptors are only usable within io_uring itself, it can be useful to turn them into real file descriptors if they ever need to be accessed via normal syscalls. This can either be a transitory thing, or just a permanent transition for a given direct descriptor. By default, new fds are installed with O_CLOEXEC set. The application can disable O_CLOEXEC by setting IORING_FIXED_FD_NO_CLOEXEC in the sqe->install_fd_flags member. Suggested-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-08 03:06:02 +00:00
[IORING_OP_FIXED_FD_INSTALL] = {
.needs_file = 1,
.prep = io_install_fixed_fd_prep,
.issue = io_install_fixed_fd,
},
io_uring: add support for ftruncate Adds support for doing truncate through io_uring, eliminating the need for applications to roll their own thread pool or offload mechanism to be able to do non-blocking truncates. Signed-off-by: Tony Solomonik <tony.solomonik@gmail.com> Link: https://lore.kernel.org/r/20240202121724.17461-3-tony.solomonik@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-02 12:17:24 +00:00
[IORING_OP_FTRUNCATE] = {
.needs_file = 1,
.hash_reg_file = 1,
.prep = io_ftruncate_prep,
.issue = io_ftruncate,
},
io_uring: Introduce IORING_OP_BIND IORING_OP_BIND provides the semantic of bind(2) via io_uring. While this is an essentially synchronous system call, the main point is to enable a network path to execute fully with io_uring registered and descriptorless files. Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20240614163047.31581-3-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-14 16:30:46 +00:00
[IORING_OP_BIND] = {
#if defined(CONFIG_NET)
.needs_file = 1,
.prep = io_bind_prep,
.issue = io_bind,
.async_size = sizeof(struct io_async_msghdr),
#else
.prep = io_eopnotsupp_prep,
io_uring: Introduce IORING_OP_LISTEN IORING_OP_LISTEN provides the semantic of listen(2) via io_uring. While this is an essentially synchronous system call, the main point is to enable a network path to execute fully with io_uring registered and descriptorless files. Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20240614163047.31581-4-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-14 16:30:47 +00:00
#endif
},
[IORING_OP_LISTEN] = {
#if defined(CONFIG_NET)
.needs_file = 1,
.prep = io_listen_prep,
.issue = io_listen,
.async_size = sizeof(struct io_async_msghdr),
#else
.prep = io_eopnotsupp_prep,
io_uring: Introduce IORING_OP_BIND IORING_OP_BIND provides the semantic of bind(2) via io_uring. While this is an essentially synchronous system call, the main point is to enable a network path to execute fully with io_uring registered and descriptorless files. Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20240614163047.31581-3-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-14 16:30:46 +00:00
#endif
},
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
};
const struct io_cold_def io_cold_defs[] = {
[IORING_OP_NOP] = {
.name = "NOP",
},
[IORING_OP_READV] = {
.name = "READV",
.cleanup = io_readv_writev_cleanup,
.fail = io_rw_fail,
},
[IORING_OP_WRITEV] = {
.name = "WRITEV",
.cleanup = io_readv_writev_cleanup,
.fail = io_rw_fail,
},
[IORING_OP_FSYNC] = {
.name = "FSYNC",
},
[IORING_OP_READ_FIXED] = {
.name = "READ_FIXED",
io_uring/rw: Free iovec before cleaning async data kmemleak shows that there is a memory leak in io_uring read operation, where a buffer is allocated at iovec import, but never de-allocated. The memory is allocated at io_async_rw->free_iovec, but, then io_async_rw is kfreed, taking the allocated memory with it. I saw this happening when the read operation fails with -11 (EAGAIN). This is the kmemleak splat. unreferenced object 0xffff8881da591c00 (size 256): ... backtrace (crc 7a15bdee): [<00000000256f2de4>] __kmalloc+0x2d6/0x410 [<000000007a9f5fc7>] iovec_from_user.part.0+0xc6/0x160 [<00000000cecdf83a>] __import_iovec+0x50/0x220 [<00000000d1d586a2>] __io_import_iovec+0x13d/0x220 [<0000000054ee9bd2>] io_prep_rw+0x186/0x340 [<00000000a9c0372d>] io_prep_rwv+0x31/0x120 [<000000001d1170b9>] io_prep_readv+0xe/0x30 [<0000000070b8eb67>] io_submit_sqes+0x1bd/0x780 [<00000000812496d4>] __do_sys_io_uring_enter+0x3ed/0x5b0 [<0000000081499602>] do_syscall_64+0x5d/0x170 [<00000000de1c5a4d>] entry_SYSCALL_64_after_hwframe+0x76/0x7e This occurs because the async data cleanup functions are not set for read/write operations. As a result, the potentially allocated iovec in the rw async data is not freed before the async data is released, leading to a memory leak. With this following patch, kmemleak does not show the leaked memory anymore, and all liburing tests pass. Fixes: a9165b83c193 ("io_uring/rw: always setup io_async_rw for read/write requests") Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240530142340.1248216-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-30 14:23:39 +00:00
.cleanup = io_readv_writev_cleanup,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
.fail = io_rw_fail,
},
[IORING_OP_WRITE_FIXED] = {
.name = "WRITE_FIXED",
io_uring/rw: Free iovec before cleaning async data kmemleak shows that there is a memory leak in io_uring read operation, where a buffer is allocated at iovec import, but never de-allocated. The memory is allocated at io_async_rw->free_iovec, but, then io_async_rw is kfreed, taking the allocated memory with it. I saw this happening when the read operation fails with -11 (EAGAIN). This is the kmemleak splat. unreferenced object 0xffff8881da591c00 (size 256): ... backtrace (crc 7a15bdee): [<00000000256f2de4>] __kmalloc+0x2d6/0x410 [<000000007a9f5fc7>] iovec_from_user.part.0+0xc6/0x160 [<00000000cecdf83a>] __import_iovec+0x50/0x220 [<00000000d1d586a2>] __io_import_iovec+0x13d/0x220 [<0000000054ee9bd2>] io_prep_rw+0x186/0x340 [<00000000a9c0372d>] io_prep_rwv+0x31/0x120 [<000000001d1170b9>] io_prep_readv+0xe/0x30 [<0000000070b8eb67>] io_submit_sqes+0x1bd/0x780 [<00000000812496d4>] __do_sys_io_uring_enter+0x3ed/0x5b0 [<0000000081499602>] do_syscall_64+0x5d/0x170 [<00000000de1c5a4d>] entry_SYSCALL_64_after_hwframe+0x76/0x7e This occurs because the async data cleanup functions are not set for read/write operations. As a result, the potentially allocated iovec in the rw async data is not freed before the async data is released, leading to a memory leak. With this following patch, kmemleak does not show the leaked memory anymore, and all liburing tests pass. Fixes: a9165b83c193 ("io_uring/rw: always setup io_async_rw for read/write requests") Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240530142340.1248216-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-30 14:23:39 +00:00
.cleanup = io_readv_writev_cleanup,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
.fail = io_rw_fail,
},
[IORING_OP_POLL_ADD] = {
.name = "POLL_ADD",
},
[IORING_OP_POLL_REMOVE] = {
.name = "POLL_REMOVE",
},
[IORING_OP_SYNC_FILE_RANGE] = {
.name = "SYNC_FILE_RANGE",
},
[IORING_OP_SENDMSG] = {
.name = "SENDMSG",
#if defined(CONFIG_NET)
.cleanup = io_sendmsg_recvmsg_cleanup,
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_RECVMSG] = {
.name = "RECVMSG",
#if defined(CONFIG_NET)
.cleanup = io_sendmsg_recvmsg_cleanup,
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_TIMEOUT] = {
.name = "TIMEOUT",
},
[IORING_OP_TIMEOUT_REMOVE] = {
.name = "TIMEOUT_REMOVE",
},
[IORING_OP_ACCEPT] = {
.name = "ACCEPT",
},
[IORING_OP_ASYNC_CANCEL] = {
.name = "ASYNC_CANCEL",
},
[IORING_OP_LINK_TIMEOUT] = {
.name = "LINK_TIMEOUT",
},
[IORING_OP_CONNECT] = {
.name = "CONNECT",
},
[IORING_OP_FALLOCATE] = {
.name = "FALLOCATE",
},
[IORING_OP_OPENAT] = {
.name = "OPENAT",
.cleanup = io_open_cleanup,
},
[IORING_OP_CLOSE] = {
.name = "CLOSE",
},
[IORING_OP_FILES_UPDATE] = {
.name = "FILES_UPDATE",
},
[IORING_OP_STATX] = {
.name = "STATX",
.cleanup = io_statx_cleanup,
},
[IORING_OP_READ] = {
.name = "READ",
io_uring/rw: Free iovec before cleaning async data kmemleak shows that there is a memory leak in io_uring read operation, where a buffer is allocated at iovec import, but never de-allocated. The memory is allocated at io_async_rw->free_iovec, but, then io_async_rw is kfreed, taking the allocated memory with it. I saw this happening when the read operation fails with -11 (EAGAIN). This is the kmemleak splat. unreferenced object 0xffff8881da591c00 (size 256): ... backtrace (crc 7a15bdee): [<00000000256f2de4>] __kmalloc+0x2d6/0x410 [<000000007a9f5fc7>] iovec_from_user.part.0+0xc6/0x160 [<00000000cecdf83a>] __import_iovec+0x50/0x220 [<00000000d1d586a2>] __io_import_iovec+0x13d/0x220 [<0000000054ee9bd2>] io_prep_rw+0x186/0x340 [<00000000a9c0372d>] io_prep_rwv+0x31/0x120 [<000000001d1170b9>] io_prep_readv+0xe/0x30 [<0000000070b8eb67>] io_submit_sqes+0x1bd/0x780 [<00000000812496d4>] __do_sys_io_uring_enter+0x3ed/0x5b0 [<0000000081499602>] do_syscall_64+0x5d/0x170 [<00000000de1c5a4d>] entry_SYSCALL_64_after_hwframe+0x76/0x7e This occurs because the async data cleanup functions are not set for read/write operations. As a result, the potentially allocated iovec in the rw async data is not freed before the async data is released, leading to a memory leak. With this following patch, kmemleak does not show the leaked memory anymore, and all liburing tests pass. Fixes: a9165b83c193 ("io_uring/rw: always setup io_async_rw for read/write requests") Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240530142340.1248216-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-30 14:23:39 +00:00
.cleanup = io_readv_writev_cleanup,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
.fail = io_rw_fail,
},
[IORING_OP_WRITE] = {
.name = "WRITE",
io_uring/rw: Free iovec before cleaning async data kmemleak shows that there is a memory leak in io_uring read operation, where a buffer is allocated at iovec import, but never de-allocated. The memory is allocated at io_async_rw->free_iovec, but, then io_async_rw is kfreed, taking the allocated memory with it. I saw this happening when the read operation fails with -11 (EAGAIN). This is the kmemleak splat. unreferenced object 0xffff8881da591c00 (size 256): ... backtrace (crc 7a15bdee): [<00000000256f2de4>] __kmalloc+0x2d6/0x410 [<000000007a9f5fc7>] iovec_from_user.part.0+0xc6/0x160 [<00000000cecdf83a>] __import_iovec+0x50/0x220 [<00000000d1d586a2>] __io_import_iovec+0x13d/0x220 [<0000000054ee9bd2>] io_prep_rw+0x186/0x340 [<00000000a9c0372d>] io_prep_rwv+0x31/0x120 [<000000001d1170b9>] io_prep_readv+0xe/0x30 [<0000000070b8eb67>] io_submit_sqes+0x1bd/0x780 [<00000000812496d4>] __do_sys_io_uring_enter+0x3ed/0x5b0 [<0000000081499602>] do_syscall_64+0x5d/0x170 [<00000000de1c5a4d>] entry_SYSCALL_64_after_hwframe+0x76/0x7e This occurs because the async data cleanup functions are not set for read/write operations. As a result, the potentially allocated iovec in the rw async data is not freed before the async data is released, leading to a memory leak. With this following patch, kmemleak does not show the leaked memory anymore, and all liburing tests pass. Fixes: a9165b83c193 ("io_uring/rw: always setup io_async_rw for read/write requests") Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240530142340.1248216-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-30 14:23:39 +00:00
.cleanup = io_readv_writev_cleanup,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
.fail = io_rw_fail,
},
[IORING_OP_FADVISE] = {
.name = "FADVISE",
},
[IORING_OP_MADVISE] = {
.name = "MADVISE",
},
[IORING_OP_SEND] = {
.name = "SEND",
#if defined(CONFIG_NET)
io_uring/net: switch io_send() and io_send_zc() to using io_async_msghdr No functional changes in this patch, just in preparation for carrying more state then what is being done now, if necessary. While unifying some of this code, add a generic send setup prep handler that they can both use. This gets rid of some manual msghdr and sockaddr on the stack, and makes it look a bit more like the sendmsg/recvmsg variants. Going forward, more can get unified on top. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-05 16:34:21 +00:00
.cleanup = io_sendmsg_recvmsg_cleanup,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_RECV] = {
.name = "RECV",
#if defined(CONFIG_NET)
io_uring/net: switch io_recv() to using io_async_msghdr No functional changes in this patch, just in preparation for carrying more state than what is available now, if necessary. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-05 22:39:16 +00:00
.cleanup = io_sendmsg_recvmsg_cleanup,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_OPENAT2] = {
.name = "OPENAT2",
.cleanup = io_open_cleanup,
},
[IORING_OP_EPOLL_CTL] = {
.name = "EPOLL",
},
[IORING_OP_SPLICE] = {
.name = "SPLICE",
io_uring/splice: open code 2nd direct file assignment In preparation for not pinning the whole registered file table, open code the second potential direct file assignment. This will be handled by appropriate helpers in the future, for now just do it manually. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-28 14:03:04 +00:00
.cleanup = io_splice_cleanup,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
},
[IORING_OP_PROVIDE_BUFFERS] = {
.name = "PROVIDE_BUFFERS",
},
[IORING_OP_REMOVE_BUFFERS] = {
.name = "REMOVE_BUFFERS",
},
[IORING_OP_TEE] = {
.name = "TEE",
io_uring/splice: open code 2nd direct file assignment In preparation for not pinning the whole registered file table, open code the second potential direct file assignment. This will be handled by appropriate helpers in the future, for now just do it manually. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-28 14:03:04 +00:00
.cleanup = io_splice_cleanup,
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
},
[IORING_OP_SHUTDOWN] = {
.name = "SHUTDOWN",
},
[IORING_OP_RENAMEAT] = {
.name = "RENAMEAT",
.cleanup = io_renameat_cleanup,
},
[IORING_OP_UNLINKAT] = {
.name = "UNLINKAT",
.cleanup = io_unlinkat_cleanup,
},
[IORING_OP_MKDIRAT] = {
.name = "MKDIRAT",
.cleanup = io_mkdirat_cleanup,
},
[IORING_OP_SYMLINKAT] = {
.name = "SYMLINKAT",
.cleanup = io_link_cleanup,
},
[IORING_OP_LINKAT] = {
.name = "LINKAT",
.cleanup = io_link_cleanup,
},
[IORING_OP_MSG_RING] = {
.name = "MSG_RING",
.cleanup = io_msg_ring_cleanup,
},
[IORING_OP_FSETXATTR] = {
.name = "FSETXATTR",
.cleanup = io_xattr_cleanup,
},
[IORING_OP_SETXATTR] = {
.name = "SETXATTR",
.cleanup = io_xattr_cleanup,
},
[IORING_OP_FGETXATTR] = {
.name = "FGETXATTR",
.cleanup = io_xattr_cleanup,
},
[IORING_OP_GETXATTR] = {
.name = "GETXATTR",
.cleanup = io_xattr_cleanup,
},
[IORING_OP_SOCKET] = {
.name = "SOCKET",
},
[IORING_OP_URING_CMD] = {
.name = "URING_CMD",
},
[IORING_OP_SEND_ZC] = {
.name = "SEND_ZC",
#if defined(CONFIG_NET)
.cleanup = io_send_zc_cleanup,
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_SENDMSG_ZC] = {
.name = "SENDMSG_ZC",
#if defined(CONFIG_NET)
io_uring/net: zerocopy sendmsg Add a zerocopy version of sendmsg. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/6aabc4bdfc0ec78df6ec9328137e394af9d4e7ef.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21 11:17:54 +00:00
.cleanup = io_send_zc_cleanup,
.fail = io_sendrecv_fail,
io_uring: wire send zc request type Add a new io_uring opcode IORING_OP_SENDZC. The main distinction from IORING_OP_SEND is that the user should specify a notification slot index in sqe::notification_idx and the buffers are safe to reuse only when the used notification is flushed and completes. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a80387c6a68ce9cf99b3b6ef6f71068468761fb7.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-12 20:52:43 +00:00
#endif
},
io_uring/rw: add support for IORING_OP_READ_MULTISHOT This behaves like IORING_OP_READ, except: 1) It only supports pollable files (eg pipes, sockets, etc). Note that for sockets, you probably want to use recv/recvmsg with multishot instead. 2) It supports multishot mode, meaning it will repeatedly trigger a read and fill a buffer when data is available. This allows similar use to recv/recvmsg but on non-sockets, where a single request will repeatedly post a CQE whenever data is read from it. 3) Because of #2, it must be used with provided buffers. This is uniformly true across any request type that supports multishot and transfers data, with the reason being that it's obviously not possible to pass in a single buffer for the data, as multiple reads may very well trigger before an application has a chance to process previous CQEs and the data passed from them. Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-11 19:35:42 +00:00
[IORING_OP_READ_MULTISHOT] = {
.name = "READ_MULTISHOT",
io_uring/rw: Free iovec before cleaning async data kmemleak shows that there is a memory leak in io_uring read operation, where a buffer is allocated at iovec import, but never de-allocated. The memory is allocated at io_async_rw->free_iovec, but, then io_async_rw is kfreed, taking the allocated memory with it. I saw this happening when the read operation fails with -11 (EAGAIN). This is the kmemleak splat. unreferenced object 0xffff8881da591c00 (size 256): ... backtrace (crc 7a15bdee): [<00000000256f2de4>] __kmalloc+0x2d6/0x410 [<000000007a9f5fc7>] iovec_from_user.part.0+0xc6/0x160 [<00000000cecdf83a>] __import_iovec+0x50/0x220 [<00000000d1d586a2>] __io_import_iovec+0x13d/0x220 [<0000000054ee9bd2>] io_prep_rw+0x186/0x340 [<00000000a9c0372d>] io_prep_rwv+0x31/0x120 [<000000001d1170b9>] io_prep_readv+0xe/0x30 [<0000000070b8eb67>] io_submit_sqes+0x1bd/0x780 [<00000000812496d4>] __do_sys_io_uring_enter+0x3ed/0x5b0 [<0000000081499602>] do_syscall_64+0x5d/0x170 [<00000000de1c5a4d>] entry_SYSCALL_64_after_hwframe+0x76/0x7e This occurs because the async data cleanup functions are not set for read/write operations. As a result, the potentially allocated iovec in the rw async data is not freed before the async data is released, leading to a memory leak. With this following patch, kmemleak does not show the leaked memory anymore, and all liburing tests pass. Fixes: a9165b83c193 ("io_uring/rw: always setup io_async_rw for read/write requests") Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240530142340.1248216-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-30 14:23:39 +00:00
.cleanup = io_readv_writev_cleanup,
io_uring/rw: add support for IORING_OP_READ_MULTISHOT This behaves like IORING_OP_READ, except: 1) It only supports pollable files (eg pipes, sockets, etc). Note that for sockets, you probably want to use recv/recvmsg with multishot instead. 2) It supports multishot mode, meaning it will repeatedly trigger a read and fill a buffer when data is available. This allows similar use to recv/recvmsg but on non-sockets, where a single request will repeatedly post a CQE whenever data is read from it. 3) Because of #2, it must be used with provided buffers. This is uniformly true across any request type that supports multishot and transfers data, with the reason being that it's obviously not possible to pass in a single buffer for the data, as multiple reads may very well trigger before an application has a chance to process previous CQEs and the data passed from them. Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-11 19:35:42 +00:00
},
io_uring: add IORING_OP_WAITID support This adds support for an async version of waitid(2), in a fully async version. If an event isn't immediately available, wait for a callback to trigger a retry. The format of the sqe is as follows: sqe->len The 'which', the idtype being queried/waited for. sqe->fd The 'pid' (or id) being waited for. sqe->file_index The 'options' being set. sqe->addr2 A pointer to siginfo_t, if any, being filled in. buf_index, add3, and waitid_flags are reserved/unused for now. waitid_flags will be used for options for this request type. One interesting use case may be to add multi-shot support, so that the request stays armed and posts a notification every time a monitored process state change occurs. Note that this does not support rusage, on Arnd's recommendation. See the waitid(2) man page for details on the arguments. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-10 22:14:37 +00:00
[IORING_OP_WAITID] = {
.name = "WAITID",
},
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
[IORING_OP_FUTEX_WAIT] = {
.name = "FUTEX_WAIT",
},
[IORING_OP_FUTEX_WAKE] = {
.name = "FUTEX_WAKE",
},
io_uring: add support for vectored futex waits This adds support for IORING_OP_FUTEX_WAITV, which allows registering a notification for a number of futexes at once. If one of the futexes are woken, then the request will complete with the index of the futex that got woken as the result. This is identical to what the normal vectored futex waitv operation does. Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a pointer to a struct futex_waitv array, and sqe->off must now contain the number of elements in that array. As flags are passed in the futex_vector array, and likewise for the value and futex address(es), sqe->addr2 and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV. For cancelations, FUTEX_WAITV does not rely on the futex_unqueue() return value as we're dealing with multiple futexes. Instead, a separate per io_uring request atomic is used to claim ownership of the request. Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well, but that punts a lot of the work to the application: 1) Application would need to submit N IORING_OP_FUTEX_WAIT requests, rather than just a single IORING_OP_FUTEX_WAITV. 2) When one futex is woken, application would need to cancel the remaining N-1 requests that didn't trigger. While this is of course doable, having a single vectored futex wait makes for much simpler application code. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-13 01:04:32 +00:00
[IORING_OP_FUTEX_WAITV] = {
.name = "FUTEX_WAITV",
},
io_uring/openclose: add support for IORING_OP_FIXED_FD_INSTALL io_uring can currently open/close regular files or fixed/direct descriptors. Or you can instantiate a fixed descriptor from a regular one, and then close the regular descriptor. But you currently can't turn a purely fixed/direct descriptor into a regular file descriptor. IORING_OP_FIXED_FD_INSTALL adds support for installing a direct descriptor into the normal file table, just like receiving a file descriptor or opening a new file would do. This is all nicely abstracted into receive_fd(), and hence adding support for this is truly trivial. Since direct descriptors are only usable within io_uring itself, it can be useful to turn them into real file descriptors if they ever need to be accessed via normal syscalls. This can either be a transitory thing, or just a permanent transition for a given direct descriptor. By default, new fds are installed with O_CLOEXEC set. The application can disable O_CLOEXEC by setting IORING_FIXED_FD_NO_CLOEXEC in the sqe->install_fd_flags member. Suggested-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-08 03:06:02 +00:00
[IORING_OP_FIXED_FD_INSTALL] = {
.name = "FIXED_FD_INSTALL",
},
io_uring: add support for ftruncate Adds support for doing truncate through io_uring, eliminating the need for applications to roll their own thread pool or offload mechanism to be able to do non-blocking truncates. Signed-off-by: Tony Solomonik <tony.solomonik@gmail.com> Link: https://lore.kernel.org/r/20240202121724.17461-3-tony.solomonik@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-02 12:17:24 +00:00
[IORING_OP_FTRUNCATE] = {
.name = "FTRUNCATE",
},
io_uring: Introduce IORING_OP_BIND IORING_OP_BIND provides the semantic of bind(2) via io_uring. While this is an essentially synchronous system call, the main point is to enable a network path to execute fully with io_uring registered and descriptorless files. Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20240614163047.31581-3-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-14 16:30:46 +00:00
[IORING_OP_BIND] = {
.name = "BIND",
},
io_uring: Introduce IORING_OP_LISTEN IORING_OP_LISTEN provides the semantic of listen(2) via io_uring. While this is an essentially synchronous system call, the main point is to enable a network path to execute fully with io_uring registered and descriptorless files. Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20240614163047.31581-4-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-14 16:30:47 +00:00
[IORING_OP_LISTEN] = {
.name = "LISTEN",
},
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
};
const char *io_uring_get_opcode(u8 opcode)
{
if (opcode < IORING_OP_LAST)
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
return io_cold_defs[opcode].name;
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
return "INVALID";
}
io_uring: Fix probe of disabled operations io_probe checks io_issue_def->not_supported, but we never really set that field, as we mark non-supported functions through a specific ->prep handler. This means we end up returning IO_URING_OP_SUPPORTED, even for disabled operations. Fix it by just checking the prep handler itself. Fixes: 66f4af93da57 ("io_uring: add support for probing opcodes") Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20240619020620.5301-2-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-19 02:06:18 +00:00
bool io_uring_op_supported(u8 opcode)
{
if (opcode < IORING_OP_LAST &&
io_issue_defs[opcode].prep != io_eopnotsupp_prep)
return true;
return false;
}
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
void __init io_uring_optable_init(void)
{
int i;
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
BUILD_BUG_ON(ARRAY_SIZE(io_cold_defs) != IORING_OP_LAST);
io_uring: Rename struct io_op_def The current io_op_def struct is becoming huge and the name is a bit generic. The goal of this patch is to rename this struct to `io_issue_def`. This struct will contain the hot functions associated with the issue code path. For now, this patch only renames the structure, and an upcoming patch will break up the structure in two, moving the non-issue fields to a secondary struct. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:10 +00:00
BUILD_BUG_ON(ARRAY_SIZE(io_issue_defs) != IORING_OP_LAST);
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
io_uring: Rename struct io_op_def The current io_op_def struct is becoming huge and the name is a bit generic. The goal of this patch is to rename this struct to `io_issue_def`. This struct will contain the hot functions associated with the issue code path. For now, this patch only renames the structure, and an upcoming patch will break up the structure in two, moving the non-issue fields to a secondary struct. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-1-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:10 +00:00
for (i = 0; i < ARRAY_SIZE(io_issue_defs); i++) {
BUG_ON(!io_issue_defs[i].prep);
if (io_issue_defs[i].prep != io_eopnotsupp_prep)
BUG_ON(!io_issue_defs[i].issue);
io_uring: Split io_issue_def struct This patch removes some "cold" fields from `struct io_issue_def`. The plan is to keep only highly used fields into `struct io_issue_def`, so, it may be hot in the cache. The hot fields are basically all the bitfields and the callback functions for .issue and .prep. The other less frequently used fields are now located in a secondary and cold struct, called `io_cold_def`. This is the size for the structs: Before: io_issue_def = 56 bytes After: io_issue_def = 24 bytes; io_cold_def = 40 bytes Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12 14:44:11 +00:00
WARN_ON_ONCE(!io_cold_defs[i].name);
io_uring: move opcode table to opdef.c We already have the declarations in opdef.h, move the rest into its own file rather than in the main io_uring.c file. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15 22:27:42 +00:00
}
}
Reference in New Issue Copy Permalink