linux/io_uring/opdef.c

738 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* io_uring opcode handling table
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/io_uring.h>
#include "io_uring.h"
#include "opdef.h"
#include "refs.h"
#include "tctx.h"
#include "sqpoll.h"
#include "fdinfo.h"
#include "kbuf.h"
#include "rsrc.h"
#include "xattr.h"
#include "nop.h"
#include "fs.h"
#include "splice.h"
#include "sync.h"
#include "advise.h"
#include "openclose.h"
#include "uring_cmd.h"
#include "epoll.h"
#include "statx.h"
#include "net.h"
#include "msg_ring.h"
#include "timeout.h"
#include "poll.h"
#include "cancel.h"
#include "rw.h"
#include "waitid.h"
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
#include "futex.h"
static int io_no_issue(struct io_kiocb *req, unsigned int issue_flags)
{
WARN_ON_ONCE(1);
return -ECANCELED;
}
static __maybe_unused int io_eopnotsupp_prep(struct io_kiocb *kiocb,
const struct io_uring_sqe *sqe)
{
return -EOPNOTSUPP;
}
const struct io_issue_def io_issue_defs[] = {
[IORING_OP_NOP] = {
.audit_skip = 1,
.iopoll = 1,
.prep = io_nop_prep,
.issue = io_nop,
},
[IORING_OP_READV] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
.iopoll_queue = 1,
.vectored = 1,
.prep = io_prep_rwv,
.issue = io_read,
},
[IORING_OP_WRITEV] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
.iopoll_queue = 1,
.vectored = 1,
.prep = io_prep_rwv,
.issue = io_write,
},
[IORING_OP_FSYNC] = {
.needs_file = 1,
.audit_skip = 1,
.prep = io_fsync_prep,
.issue = io_fsync,
},
[IORING_OP_READ_FIXED] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
.iopoll_queue = 1,
.prep = io_prep_rw_fixed,
.issue = io_read,
},
[IORING_OP_WRITE_FIXED] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
.iopoll_queue = 1,
.prep = io_prep_rw_fixed,
.issue = io_write,
},
[IORING_OP_POLL_ADD] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.audit_skip = 1,
.prep = io_poll_add_prep,
.issue = io_poll_add,
},
[IORING_OP_POLL_REMOVE] = {
.audit_skip = 1,
.prep = io_poll_remove_prep,
.issue = io_poll_remove,
},
[IORING_OP_SYNC_FILE_RANGE] = {
.needs_file = 1,
.audit_skip = 1,
.prep = io_sfr_prep,
.issue = io_sync_file_range,
},
[IORING_OP_SENDMSG] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.ioprio = 1,
.manual_alloc = 1,
#if defined(CONFIG_NET)
.prep = io_sendmsg_prep,
.issue = io_sendmsg,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_RECVMSG] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.ioprio = 1,
.manual_alloc = 1,
#if defined(CONFIG_NET)
.prep = io_recvmsg_prep,
.issue = io_recvmsg,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_TIMEOUT] = {
.audit_skip = 1,
.prep = io_timeout_prep,
.issue = io_timeout,
},
[IORING_OP_TIMEOUT_REMOVE] = {
/* used by timeout updates' prep() */
.audit_skip = 1,
.prep = io_timeout_remove_prep,
.issue = io_timeout_remove,
},
[IORING_OP_ACCEPT] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.poll_exclusive = 1,
.ioprio = 1, /* used for flags */
#if defined(CONFIG_NET)
.prep = io_accept_prep,
.issue = io_accept,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_ASYNC_CANCEL] = {
.audit_skip = 1,
.prep = io_async_cancel_prep,
.issue = io_async_cancel,
},
[IORING_OP_LINK_TIMEOUT] = {
.audit_skip = 1,
.prep = io_link_timeout_prep,
.issue = io_no_issue,
},
[IORING_OP_CONNECT] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
#if defined(CONFIG_NET)
.prep = io_connect_prep,
.issue = io_connect,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_FALLOCATE] = {
.needs_file = 1,
.prep = io_fallocate_prep,
.issue = io_fallocate,
},
[IORING_OP_OPENAT] = {
.prep = io_openat_prep,
.issue = io_openat,
},
[IORING_OP_CLOSE] = {
.prep = io_close_prep,
.issue = io_close,
},
[IORING_OP_FILES_UPDATE] = {
.audit_skip = 1,
.iopoll = 1,
.prep = io_files_update_prep,
.issue = io_files_update,
},
[IORING_OP_STATX] = {
.audit_skip = 1,
.prep = io_statx_prep,
.issue = io_statx,
},
[IORING_OP_READ] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
.iopoll_queue = 1,
.prep = io_prep_rw,
.issue = io_read,
},
[IORING_OP_WRITE] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.plug = 1,
.audit_skip = 1,
.ioprio = 1,
.iopoll = 1,
.iopoll_queue = 1,
.prep = io_prep_rw,
.issue = io_write,
},
[IORING_OP_FADVISE] = {
.needs_file = 1,
.audit_skip = 1,
.prep = io_fadvise_prep,
.issue = io_fadvise,
},
[IORING_OP_MADVISE] = {
.audit_skip = 1,
.prep = io_madvise_prep,
.issue = io_madvise,
},
[IORING_OP_SEND] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.audit_skip = 1,
.ioprio = 1,
.manual_alloc = 1,
#if defined(CONFIG_NET)
.prep = io_sendmsg_prep,
.issue = io_send,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_RECV] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.audit_skip = 1,
.ioprio = 1,
#if defined(CONFIG_NET)
.prep = io_recvmsg_prep,
.issue = io_recv,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_OPENAT2] = {
.prep = io_openat2_prep,
.issue = io_openat2,
},
[IORING_OP_EPOLL_CTL] = {
.unbound_nonreg_file = 1,
.audit_skip = 1,
#if defined(CONFIG_EPOLL)
.prep = io_epoll_ctl_prep,
.issue = io_epoll_ctl,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_SPLICE] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.audit_skip = 1,
.prep = io_splice_prep,
.issue = io_splice,
},
[IORING_OP_PROVIDE_BUFFERS] = {
.audit_skip = 1,
.iopoll = 1,
.prep = io_provide_buffers_prep,
.issue = io_provide_buffers,
},
[IORING_OP_REMOVE_BUFFERS] = {
.audit_skip = 1,
.iopoll = 1,
.prep = io_remove_buffers_prep,
.issue = io_remove_buffers,
},
[IORING_OP_TEE] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
.audit_skip = 1,
.prep = io_tee_prep,
.issue = io_tee,
},
[IORING_OP_SHUTDOWN] = {
.needs_file = 1,
#if defined(CONFIG_NET)
.prep = io_shutdown_prep,
.issue = io_shutdown,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_RENAMEAT] = {
.prep = io_renameat_prep,
.issue = io_renameat,
},
[IORING_OP_UNLINKAT] = {
.prep = io_unlinkat_prep,
.issue = io_unlinkat,
},
[IORING_OP_MKDIRAT] = {
.prep = io_mkdirat_prep,
.issue = io_mkdirat,
},
[IORING_OP_SYMLINKAT] = {
.prep = io_symlinkat_prep,
.issue = io_symlinkat,
},
[IORING_OP_LINKAT] = {
.prep = io_linkat_prep,
.issue = io_linkat,
},
[IORING_OP_MSG_RING] = {
.needs_file = 1,
.iopoll = 1,
.prep = io_msg_ring_prep,
.issue = io_msg_ring,
},
[IORING_OP_FSETXATTR] = {
.needs_file = 1,
.prep = io_fsetxattr_prep,
.issue = io_fsetxattr,
},
[IORING_OP_SETXATTR] = {
.prep = io_setxattr_prep,
.issue = io_setxattr,
},
[IORING_OP_FGETXATTR] = {
.needs_file = 1,
.prep = io_fgetxattr_prep,
.issue = io_fgetxattr,
},
[IORING_OP_GETXATTR] = {
.prep = io_getxattr_prep,
.issue = io_getxattr,
},
[IORING_OP_SOCKET] = {
.audit_skip = 1,
#if defined(CONFIG_NET)
.prep = io_socket_prep,
.issue = io_socket,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_URING_CMD] = {
.needs_file = 1,
.plug = 1,
.iopoll = 1,
.iopoll_queue = 1,
.prep = io_uring_cmd_prep,
.issue = io_uring_cmd,
},
[IORING_OP_SEND_ZC] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.audit_skip = 1,
.ioprio = 1,
.manual_alloc = 1,
#if defined(CONFIG_NET)
.prep = io_send_zc_prep,
.issue = io_send_zc,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_SENDMSG_ZC] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollout = 1,
.ioprio = 1,
.manual_alloc = 1,
#if defined(CONFIG_NET)
.prep = io_send_zc_prep,
.issue = io_sendmsg_zc,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_READ_MULTISHOT] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.pollin = 1,
.buffer_select = 1,
.audit_skip = 1,
.prep = io_read_mshot_prep,
.issue = io_read_mshot,
},
[IORING_OP_WAITID] = {
.prep = io_waitid_prep,
.issue = io_waitid,
},
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
[IORING_OP_FUTEX_WAIT] = {
#if defined(CONFIG_FUTEX)
.prep = io_futex_prep,
.issue = io_futex_wait,
#else
.prep = io_eopnotsupp_prep,
#endif
},
[IORING_OP_FUTEX_WAKE] = {
#if defined(CONFIG_FUTEX)
.prep = io_futex_prep,
.issue = io_futex_wake,
#else
.prep = io_eopnotsupp_prep,
2023-06-13 01:04:32 +00:00
#endif
},
[IORING_OP_FUTEX_WAITV] = {
#if defined(CONFIG_FUTEX)
.prep = io_futexv_prep,
.issue = io_futexv_wait,
#else
.prep = io_eopnotsupp_prep,
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
#endif
},
[IORING_OP_FIXED_FD_INSTALL] = {
.needs_file = 1,
.prep = io_install_fixed_fd_prep,
.issue = io_install_fixed_fd,
},
};
const struct io_cold_def io_cold_defs[] = {
[IORING_OP_NOP] = {
.name = "NOP",
},
[IORING_OP_READV] = {
.async_size = sizeof(struct io_async_rw),
.name = "READV",
.prep_async = io_readv_prep_async,
.cleanup = io_readv_writev_cleanup,
.fail = io_rw_fail,
},
[IORING_OP_WRITEV] = {
.async_size = sizeof(struct io_async_rw),
.name = "WRITEV",
.prep_async = io_writev_prep_async,
.cleanup = io_readv_writev_cleanup,
.fail = io_rw_fail,
},
[IORING_OP_FSYNC] = {
.name = "FSYNC",
},
[IORING_OP_READ_FIXED] = {
.async_size = sizeof(struct io_async_rw),
.name = "READ_FIXED",
.fail = io_rw_fail,
},
[IORING_OP_WRITE_FIXED] = {
.async_size = sizeof(struct io_async_rw),
.name = "WRITE_FIXED",
.fail = io_rw_fail,
},
[IORING_OP_POLL_ADD] = {
.name = "POLL_ADD",
},
[IORING_OP_POLL_REMOVE] = {
.name = "POLL_REMOVE",
},
[IORING_OP_SYNC_FILE_RANGE] = {
.name = "SYNC_FILE_RANGE",
},
[IORING_OP_SENDMSG] = {
.name = "SENDMSG",
#if defined(CONFIG_NET)
.async_size = sizeof(struct io_async_msghdr),
.prep_async = io_sendmsg_prep_async,
.cleanup = io_sendmsg_recvmsg_cleanup,
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_RECVMSG] = {
.name = "RECVMSG",
#if defined(CONFIG_NET)
.async_size = sizeof(struct io_async_msghdr),
.prep_async = io_recvmsg_prep_async,
.cleanup = io_sendmsg_recvmsg_cleanup,
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_TIMEOUT] = {
.async_size = sizeof(struct io_timeout_data),
.name = "TIMEOUT",
},
[IORING_OP_TIMEOUT_REMOVE] = {
.name = "TIMEOUT_REMOVE",
},
[IORING_OP_ACCEPT] = {
.name = "ACCEPT",
},
[IORING_OP_ASYNC_CANCEL] = {
.name = "ASYNC_CANCEL",
},
[IORING_OP_LINK_TIMEOUT] = {
.async_size = sizeof(struct io_timeout_data),
.name = "LINK_TIMEOUT",
},
[IORING_OP_CONNECT] = {
.name = "CONNECT",
#if defined(CONFIG_NET)
.async_size = sizeof(struct io_async_connect),
.prep_async = io_connect_prep_async,
#endif
},
[IORING_OP_FALLOCATE] = {
.name = "FALLOCATE",
},
[IORING_OP_OPENAT] = {
.name = "OPENAT",
.cleanup = io_open_cleanup,
},
[IORING_OP_CLOSE] = {
.name = "CLOSE",
},
[IORING_OP_FILES_UPDATE] = {
.name = "FILES_UPDATE",
},
[IORING_OP_STATX] = {
.name = "STATX",
.cleanup = io_statx_cleanup,
},
[IORING_OP_READ] = {
.async_size = sizeof(struct io_async_rw),
.name = "READ",
.fail = io_rw_fail,
},
[IORING_OP_WRITE] = {
.async_size = sizeof(struct io_async_rw),
.name = "WRITE",
.fail = io_rw_fail,
},
[IORING_OP_FADVISE] = {
.name = "FADVISE",
},
[IORING_OP_MADVISE] = {
.name = "MADVISE",
},
[IORING_OP_SEND] = {
.name = "SEND",
#if defined(CONFIG_NET)
.async_size = sizeof(struct io_async_msghdr),
.fail = io_sendrecv_fail,
.prep_async = io_send_prep_async,
#endif
},
[IORING_OP_RECV] = {
.name = "RECV",
#if defined(CONFIG_NET)
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_OPENAT2] = {
.name = "OPENAT2",
.cleanup = io_open_cleanup,
},
[IORING_OP_EPOLL_CTL] = {
.name = "EPOLL",
},
[IORING_OP_SPLICE] = {
.name = "SPLICE",
},
[IORING_OP_PROVIDE_BUFFERS] = {
.name = "PROVIDE_BUFFERS",
},
[IORING_OP_REMOVE_BUFFERS] = {
.name = "REMOVE_BUFFERS",
},
[IORING_OP_TEE] = {
.name = "TEE",
},
[IORING_OP_SHUTDOWN] = {
.name = "SHUTDOWN",
},
[IORING_OP_RENAMEAT] = {
.name = "RENAMEAT",
.cleanup = io_renameat_cleanup,
},
[IORING_OP_UNLINKAT] = {
.name = "UNLINKAT",
.cleanup = io_unlinkat_cleanup,
},
[IORING_OP_MKDIRAT] = {
.name = "MKDIRAT",
.cleanup = io_mkdirat_cleanup,
},
[IORING_OP_SYMLINKAT] = {
.name = "SYMLINKAT",
.cleanup = io_link_cleanup,
},
[IORING_OP_LINKAT] = {
.name = "LINKAT",
.cleanup = io_link_cleanup,
},
[IORING_OP_MSG_RING] = {
.name = "MSG_RING",
.cleanup = io_msg_ring_cleanup,
},
[IORING_OP_FSETXATTR] = {
.name = "FSETXATTR",
.cleanup = io_xattr_cleanup,
},
[IORING_OP_SETXATTR] = {
.name = "SETXATTR",
.cleanup = io_xattr_cleanup,
},
[IORING_OP_FGETXATTR] = {
.name = "FGETXATTR",
.cleanup = io_xattr_cleanup,
},
[IORING_OP_GETXATTR] = {
.name = "GETXATTR",
.cleanup = io_xattr_cleanup,
},
[IORING_OP_SOCKET] = {
.name = "SOCKET",
},
[IORING_OP_URING_CMD] = {
.name = "URING_CMD",
.async_size = 2 * sizeof(struct io_uring_sqe),
.prep_async = io_uring_cmd_prep_async,
},
[IORING_OP_SEND_ZC] = {
.name = "SEND_ZC",
#if defined(CONFIG_NET)
.async_size = sizeof(struct io_async_msghdr),
.prep_async = io_send_prep_async,
.cleanup = io_send_zc_cleanup,
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_SENDMSG_ZC] = {
.name = "SENDMSG_ZC",
#if defined(CONFIG_NET)
.async_size = sizeof(struct io_async_msghdr),
.prep_async = io_sendmsg_prep_async,
.cleanup = io_send_zc_cleanup,
.fail = io_sendrecv_fail,
#endif
},
[IORING_OP_READ_MULTISHOT] = {
.name = "READ_MULTISHOT",
},
[IORING_OP_WAITID] = {
.name = "WAITID",
.async_size = sizeof(struct io_waitid_async),
},
io_uring: add support for futex wake and wait Add support for FUTEX_WAKE/WAIT primitives. IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as it does support passing in a bitset. Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and FUTEX_WAIT_BITSET. For both of them, they are using the futex2 interface. FUTEX_WAKE is straight forward, as those can always be done directly from the io_uring submission without needing async handling. For FUTEX_WAIT, things are a bit more complicated. If the futex isn't ready, then we rely on a callback via futex_queue->wake() when someone wakes up the futex. From that calback, we queue up task_work with the original task, which will post a CQE and wake it, if necessary. Cancelations are supported, both from the application point-of-view, but also to be able to cancel pending waits if the ring exits before all events have occurred. The return value of futex_unqueue() is used to gate who wins the potential race between cancelation and futex wakeups. Whomever gets a 'ret == 1' return from that claims ownership of the io_uring futex request. This is just the barebones wait/wake support. PI or REQUEUE support is not added at this point, unclear if we might look into that later. Likewise, explicit timeouts are not supported either. It is expected that users that need timeouts would do so via the usual io_uring mechanism to do that using linked timeouts. The SQE format is as follows: `addr` Address of futex `fd` futex2(2) FUTEX2_* flags `futex_flags` io_uring specific command flags. None valid now. `addr2` Value of futex `addr3` Mask to wake/wait Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-08 17:57:40 +00:00
[IORING_OP_FUTEX_WAIT] = {
.name = "FUTEX_WAIT",
},
[IORING_OP_FUTEX_WAKE] = {
.name = "FUTEX_WAKE",
},
2023-06-13 01:04:32 +00:00
[IORING_OP_FUTEX_WAITV] = {
.name = "FUTEX_WAITV",
},
[IORING_OP_FIXED_FD_INSTALL] = {
.name = "FIXED_FD_INSTALL",
},
};
const char *io_uring_get_opcode(u8 opcode)
{
if (opcode < IORING_OP_LAST)
return io_cold_defs[opcode].name;
return "INVALID";
}
void __init io_uring_optable_init(void)
{
int i;
BUILD_BUG_ON(ARRAY_SIZE(io_cold_defs) != IORING_OP_LAST);
BUILD_BUG_ON(ARRAY_SIZE(io_issue_defs) != IORING_OP_LAST);
for (i = 0; i < ARRAY_SIZE(io_issue_defs); i++) {
BUG_ON(!io_issue_defs[i].prep);
if (io_issue_defs[i].prep != io_eopnotsupp_prep)
BUG_ON(!io_issue_defs[i].issue);
WARN_ON_ONCE(!io_cold_defs[i].name);
}
}