linux/drivers/dma/ioat/dma.c

574 lines
14 KiB
C
Raw Normal View History

/*
* Intel I/OAT DMA Linux driver
* Copyright(c) 2004 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
*/
/*
* This driver supports an Intel I/OAT DMA engine, which does asynchronous
* copy operations.
*/
#include <linux/init.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/workqueue.h>
#include <linux/prefetch.h>
#include "dma.h"
#include "registers.h"
#include "hw.h"
#include "../dmaengine.h"
int ioat_pending_level = 4;
module_param(ioat_pending_level, int, 0644);
MODULE_PARM_DESC(ioat_pending_level,
"high-water mark for pushing ioat descriptors (default: 4)");
/**
* ioat_dma_do_interrupt - handler used for single vector interrupt mode
* @irq: interrupt id
* @data: interrupt data
*/
static irqreturn_t ioat_dma_do_interrupt(int irq, void *data)
{
struct ioatdma_device *instance = data;
struct ioat_chan_common *chan;
unsigned long attnstatus;
int bit;
u8 intrctrl;
intrctrl = readb(instance->reg_base + IOAT_INTRCTRL_OFFSET);
if (!(intrctrl & IOAT_INTRCTRL_MASTER_INT_EN))
return IRQ_NONE;
if (!(intrctrl & IOAT_INTRCTRL_INT_STATUS)) {
writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
return IRQ_NONE;
}
attnstatus = readl(instance->reg_base + IOAT_ATTNSTATUS_OFFSET);
for_each_set_bit(bit, &attnstatus, BITS_PER_LONG) {
chan = ioat_chan_by_index(instance, bit);
if (test_bit(IOAT_RUN, &chan->state))
tasklet_schedule(&chan->cleanup_task);
}
writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
return IRQ_HANDLED;
}
/**
* ioat_dma_do_interrupt_msix - handler used for vector-per-channel interrupt mode
* @irq: interrupt id
* @data: interrupt data
*/
static irqreturn_t ioat_dma_do_interrupt_msix(int irq, void *data)
{
struct ioat_chan_common *chan = data;
if (test_bit(IOAT_RUN, &chan->state))
tasklet_schedule(&chan->cleanup_task);
return IRQ_HANDLED;
}
/* common channel initialization */
void ioat_init_channel(struct ioatdma_device *device, struct ioat_chan_common *chan, int idx)
{
struct dma_device *dma = &device->common;
struct dma_chan *c = &chan->common;
unsigned long data = (unsigned long) c;
chan->device = device;
chan->reg_base = device->reg_base + (0x80 * (idx + 1));
spin_lock_init(&chan->cleanup_lock);
chan->common.device = dma;
dma_cookie_init(&chan->common);
list_add_tail(&chan->common.device_node, &dma->channels);
device->idx[idx] = chan;
init_timer(&chan->timer);
chan->timer.function = device->timer_fn;
chan->timer.data = data;
tasklet_init(&chan->cleanup_task, device->cleanup_fn, data);
}
void ioat_stop(struct ioat_chan_common *chan)
{
struct ioatdma_device *device = chan->device;
struct pci_dev *pdev = device->pdev;
int chan_id = chan_num(chan);
struct msix_entry *msix;
/* 1/ stop irq from firing tasklets
* 2/ stop the tasklet from re-arming irqs
*/
clear_bit(IOAT_RUN, &chan->state);
/* flush inflight interrupts */
switch (device->irq_mode) {
case IOAT_MSIX:
msix = &device->msix_entries[chan_id];
synchronize_irq(msix->vector);
break;
case IOAT_MSI:
case IOAT_INTX:
synchronize_irq(pdev->irq);
break;
default:
break;
}
/* flush inflight timers */
del_timer_sync(&chan->timer);
/* flush inflight tasklet runs */
tasklet_kill(&chan->cleanup_task);
/* final cleanup now that everything is quiesced and can't re-arm */
device->cleanup_fn((unsigned long) &chan->common);
}
dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan)
{
dma_addr_t phys_complete;
u64 completion;
completion = *chan->completion;
phys_complete = ioat_chansts_to_addr(completion);
dev_dbg(to_dev(chan), "%s: phys_complete: %#llx\n", __func__,
(unsigned long long) phys_complete);
if (is_ioat_halted(completion)) {
u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
dev_err(to_dev(chan), "Channel halted, chanerr = %x\n",
chanerr);
/* TODO do something to salvage the situation */
}
return phys_complete;
}
bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
dma_addr_t *phys_complete)
{
*phys_complete = ioat_get_current_completion(chan);
if (*phys_complete == chan->last_completion)
return false;
clear_bit(IOAT_COMPLETION_ACK, &chan->state);
mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
return true;
}
enum dma_status
ioat_dma_tx_status(struct dma_chan *c, dma_cookie_t cookie,
struct dma_tx_state *txstate)
{
struct ioat_chan_common *chan = to_chan_common(c);
struct ioatdma_device *device = chan->device;
enum dma_status ret;
ret = dma_cookie_status(c, cookie, txstate);
if (ret == DMA_COMPLETE)
return ret;
device->cleanup_fn((unsigned long) c);
return dma_cookie_status(c, cookie, txstate);
}
/*
* Perform a IOAT transaction to verify the HW works.
*/
#define IOAT_TEST_SIZE 2000
static void ioat_dma_test_callback(void *dma_async_param)
{
struct completion *cmp = dma_async_param;
complete(cmp);
}
/**
* ioat_dma_self_test - Perform a IOAT transaction to verify the HW works.
* @device: device to be tested
*/
int ioat_dma_self_test(struct ioatdma_device *device)
{
int i;
u8 *src;
u8 *dest;
struct dma_device *dma = &device->common;
struct device *dev = &device->pdev->dev;
struct dma_chan *dma_chan;
struct dma_async_tx_descriptor *tx;
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int err = 0;
struct completion cmp;
unsigned long tmo;
unsigned long flags;
src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
if (!src)
return -ENOMEM;
dest = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
if (!dest) {
kfree(src);
return -ENOMEM;
}
/* Fill in src buffer */
for (i = 0; i < IOAT_TEST_SIZE; i++)
src[i] = (u8)i;
/* Start copy, using first DMA channel */
dma_chan = container_of(dma->channels.next, struct dma_chan,
device_node);
if (dma->device_alloc_chan_resources(dma_chan) < 1) {
dev_err(dev, "selftest cannot allocate chan resource\n");
err = -ENODEV;
goto out;
}
dma_src = dma_map_single(dev, src, IOAT_TEST_SIZE, DMA_TO_DEVICE);
drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test() Check DMA mapping return values in function ioat_dma_self_test() to get rid of following warning message. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0() ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single] Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8 Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013 Call Trace: dump_stack+0x4d/0x66 warn_slowpath_common+0x7d/0xa0 warn_slowpath_fmt+0x4c/0x50 check_unmap+0x4c0/0x9a0 debug_dma_unmap_page+0x81/0x90 ioat_dma_self_test+0x3d2/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] ioat_pci_probe+0x122/0x1b0 [ioatdma] local_pci_probe+0x45/0xa0 pci_device_probe+0xd9/0x130 driver_probe_device+0x171/0x490 __driver_attach+0x93/0xa0 bus_for_each_dev+0x6b/0xb0 driver_attach+0x1e/0x20 bus_add_driver+0x1f8/0x2b0 driver_register+0x81/0x110 __pci_register_driver+0x60/0x70 ioat_init_module+0x89/0x1000 [ioatdma] do_one_initcall+0xe2/0x250 load_module+0x2313/0x2a00 SyS_init_module+0xd9/0x130 system_call_fastpath+0x1a/0x1f ---[ end trace 990c591681d27c31 ]--- Mapped at: debug_dma_map_page+0xbe/0x180 ioat_dma_self_test+0x1ab/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02 20:58:52 +00:00
if (dma_mapping_error(dev, dma_src)) {
dev_err(dev, "mapping src buffer failed\n");
goto free_resources;
}
dma_dest = dma_map_single(dev, dest, IOAT_TEST_SIZE, DMA_FROM_DEVICE);
drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test() Check DMA mapping return values in function ioat_dma_self_test() to get rid of following warning message. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0() ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single] Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8 Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013 Call Trace: dump_stack+0x4d/0x66 warn_slowpath_common+0x7d/0xa0 warn_slowpath_fmt+0x4c/0x50 check_unmap+0x4c0/0x9a0 debug_dma_unmap_page+0x81/0x90 ioat_dma_self_test+0x3d2/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] ioat_pci_probe+0x122/0x1b0 [ioatdma] local_pci_probe+0x45/0xa0 pci_device_probe+0xd9/0x130 driver_probe_device+0x171/0x490 __driver_attach+0x93/0xa0 bus_for_each_dev+0x6b/0xb0 driver_attach+0x1e/0x20 bus_add_driver+0x1f8/0x2b0 driver_register+0x81/0x110 __pci_register_driver+0x60/0x70 ioat_init_module+0x89/0x1000 [ioatdma] do_one_initcall+0xe2/0x250 load_module+0x2313/0x2a00 SyS_init_module+0xd9/0x130 system_call_fastpath+0x1a/0x1f ---[ end trace 990c591681d27c31 ]--- Mapped at: debug_dma_map_page+0xbe/0x180 ioat_dma_self_test+0x1ab/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02 20:58:52 +00:00
if (dma_mapping_error(dev, dma_dest)) {
dev_err(dev, "mapping dest buffer failed\n");
goto unmap_src;
}
flags = DMA_PREP_INTERRUPT;
tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
IOAT_TEST_SIZE, flags);
if (!tx) {
dev_err(dev, "Self-test prep failed, disabling\n");
err = -ENODEV;
goto unmap_dma;
}
dmaengine: refactor dmaengine around dma_async_tx_descriptor The current dmaengine interface defines mutliple routines per operation, i.e. dma_async_memcpy_buf_to_buf, dma_async_memcpy_buf_to_page etc. Adding more operation types (xor, crc, etc) to this model would result in an unmanageable number of method permutations. Are we really going to add a set of hooks for each DMA engine whizbang feature? - Jeff Garzik The descriptor creation process is refactored using the new common dma_async_tx_descriptor structure. Instead of per driver do_<operation>_<dest>_to_<src> methods, drivers integrate dma_async_tx_descriptor into their private software descriptor and then define a 'prep' routine per operation. The prep routine allocates a descriptor and ensures that the tx_set_src, tx_set_dest, tx_submit routines are valid. Descriptor creation and submission becomes: struct dma_device *dev; struct dma_chan *chan; struct dma_async_tx_descriptor *tx; tx = dev->device_prep_dma_<operation>(chan, len, int_flag) tx->tx_set_src(dma_addr_t, tx, index /* for multi-source ops */) tx->tx_set_dest(dma_addr_t, tx, index) tx->tx_submit(tx) In addition to the refactoring, dma_async_tx_descriptor also lays the groundwork for definining cross-channel-operation dependencies, and a callback facility for asynchronous notification of operation completion. Changelog: * drop dma mapping methods, suggested by Chris Leech * fix ioat_dma_dependency_added, also caught by Andrew Morton * fix dma_sync_wait, change from Andrew Morton * uninline large functions, change from Andrew Morton * add tx->callback = NULL to dmaengine calls to interoperate with async_tx calls * hookup ioat_tx_submit * convert channel capabilities to a 'cpumask_t like' bitmap * removed DMA_TX_ARRAY_INIT, no longer needed * checkpatch.pl fixes * make set_src, set_dest, and tx_submit descriptor specific methods * fixup git-ioat merge * move group_list and phys to dma_async_tx_descriptor Cc: Jeff Garzik <jeff@garzik.org> Cc: Chris Leech <christopher.leech@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David S. Miller <davem@davemloft.net>
2007-01-02 18:10:43 +00:00
async_tx_ack(tx);
init_completion(&cmp);
tx->callback = ioat_dma_test_callback;
tx->callback_param = &cmp;
cookie = tx->tx_submit(tx);
if (cookie < 0) {
dev_err(dev, "Self-test setup failed, disabling\n");
err = -ENODEV;
goto unmap_dma;
}
dma->device_issue_pending(dma_chan);
tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
if (tmo == 0 ||
dma->device_tx_status(dma_chan, cookie, NULL)
!= DMA_COMPLETE) {
dev_err(dev, "Self-test copy timed out, disabling\n");
err = -ENODEV;
goto unmap_dma;
}
if (memcmp(src, dest, IOAT_TEST_SIZE)) {
dev_err(dev, "Self-test copy failed compare, disabling\n");
err = -ENODEV;
goto free_resources;
}
unmap_dma:
dma_unmap_single(dev, dma_dest, IOAT_TEST_SIZE, DMA_FROM_DEVICE);
drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test() Check DMA mapping return values in function ioat_dma_self_test() to get rid of following warning message. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0() ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single] Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8 Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013 Call Trace: dump_stack+0x4d/0x66 warn_slowpath_common+0x7d/0xa0 warn_slowpath_fmt+0x4c/0x50 check_unmap+0x4c0/0x9a0 debug_dma_unmap_page+0x81/0x90 ioat_dma_self_test+0x3d2/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] ioat_pci_probe+0x122/0x1b0 [ioatdma] local_pci_probe+0x45/0xa0 pci_device_probe+0xd9/0x130 driver_probe_device+0x171/0x490 __driver_attach+0x93/0xa0 bus_for_each_dev+0x6b/0xb0 driver_attach+0x1e/0x20 bus_add_driver+0x1f8/0x2b0 driver_register+0x81/0x110 __pci_register_driver+0x60/0x70 ioat_init_module+0x89/0x1000 [ioatdma] do_one_initcall+0xe2/0x250 load_module+0x2313/0x2a00 SyS_init_module+0xd9/0x130 system_call_fastpath+0x1a/0x1f ---[ end trace 990c591681d27c31 ]--- Mapped at: debug_dma_map_page+0xbe/0x180 ioat_dma_self_test+0x1ab/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02 20:58:52 +00:00
unmap_src:
dma_unmap_single(dev, dma_src, IOAT_TEST_SIZE, DMA_TO_DEVICE);
free_resources:
dma->device_free_chan_resources(dma_chan);
out:
kfree(src);
kfree(dest);
return err;
}
static char ioat_interrupt_style[32] = "msix";
module_param_string(ioat_interrupt_style, ioat_interrupt_style,
sizeof(ioat_interrupt_style), 0644);
MODULE_PARM_DESC(ioat_interrupt_style,
"set ioat interrupt style: msix (default), msi, intx");
/**
* ioat_dma_setup_interrupts - setup interrupt handler
* @device: ioat device
*/
int ioat_dma_setup_interrupts(struct ioatdma_device *device)
{
struct ioat_chan_common *chan;
struct pci_dev *pdev = device->pdev;
struct device *dev = &pdev->dev;
struct msix_entry *msix;
int i, j, msixcnt;
int err = -EINVAL;
u8 intrctrl = 0;
if (!strcmp(ioat_interrupt_style, "msix"))
goto msix;
if (!strcmp(ioat_interrupt_style, "msi"))
goto msi;
if (!strcmp(ioat_interrupt_style, "intx"))
goto intx;
dev_err(dev, "invalid ioat_interrupt_style %s\n", ioat_interrupt_style);
goto err_no_irq;
msix:
/* The number of MSI-X vectors should equal the number of channels */
msixcnt = device->common.chancnt;
for (i = 0; i < msixcnt; i++)
device->msix_entries[i].entry = i;
err = pci_enable_msix_exact(pdev, device->msix_entries, msixcnt);
if (err)
goto msi;
for (i = 0; i < msixcnt; i++) {
msix = &device->msix_entries[i];
chan = ioat_chan_by_index(device, i);
err = devm_request_irq(dev, msix->vector,
ioat_dma_do_interrupt_msix, 0,
"ioat-msix", chan);
if (err) {
for (j = 0; j < i; j++) {
msix = &device->msix_entries[j];
chan = ioat_chan_by_index(device, j);
devm_free_irq(dev, msix->vector, chan);
}
goto msi;
}
}
intrctrl |= IOAT_INTRCTRL_MSIX_VECTOR_CONTROL;
device->irq_mode = IOAT_MSIX;
goto done;
msi:
err = pci_enable_msi(pdev);
if (err)
goto intx;
err = devm_request_irq(dev, pdev->irq, ioat_dma_do_interrupt, 0,
"ioat-msi", device);
if (err) {
pci_disable_msi(pdev);
goto intx;
}
device->irq_mode = IOAT_MSI;
goto done;
intx:
err = devm_request_irq(dev, pdev->irq, ioat_dma_do_interrupt,
IRQF_SHARED, "ioat-intx", device);
if (err)
goto err_no_irq;
device->irq_mode = IOAT_INTX;
done:
if (device->intr_quirk)
device->intr_quirk(device);
intrctrl |= IOAT_INTRCTRL_MASTER_INT_EN;
writeb(intrctrl, device->reg_base + IOAT_INTRCTRL_OFFSET);
return 0;
err_no_irq:
/* Disable all interrupt generation */
writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
device->irq_mode = IOAT_NOIRQ;
dev_err(dev, "no usable interrupts\n");
return err;
}
EXPORT_SYMBOL(ioat_dma_setup_interrupts);
static void ioat_disable_interrupts(struct ioatdma_device *device)
{
/* Disable all interrupt generation */
writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
}
int ioat_probe(struct ioatdma_device *device)
{
int err = -ENODEV;
struct dma_device *dma = &device->common;
struct pci_dev *pdev = device->pdev;
struct device *dev = &pdev->dev;
/* DMA coherent memory pool for DMA descriptor allocations */
device->dma_pool = pci_pool_create("dma_desc_pool", pdev,
sizeof(struct ioat_dma_descriptor),
64, 0);
if (!device->dma_pool) {
err = -ENOMEM;
goto err_dma_pool;
}
device->completion_pool = pci_pool_create("completion_pool", pdev,
sizeof(u64), SMP_CACHE_BYTES,
SMP_CACHE_BYTES);
if (!device->completion_pool) {
err = -ENOMEM;
goto err_completion_pool;
}
device->enumerate_channels(device);
dma_cap_set(DMA_MEMCPY, dma->cap_mask);
dma->dev = &pdev->dev;
if (!dma->chancnt) {
dev_err(dev, "channel enumeration error\n");
goto err_setup_interrupts;
}
err = ioat_dma_setup_interrupts(device);
if (err)
goto err_setup_interrupts;
err = device->self_test(device);
if (err)
goto err_self_test;
return 0;
err_self_test:
ioat_disable_interrupts(device);
err_setup_interrupts:
pci_pool_destroy(device->completion_pool);
err_completion_pool:
pci_pool_destroy(device->dma_pool);
err_dma_pool:
return err;
}
int ioat_register(struct ioatdma_device *device)
{
int err = dma_async_device_register(&device->common);
if (err) {
ioat_disable_interrupts(device);
pci_pool_destroy(device->completion_pool);
pci_pool_destroy(device->dma_pool);
}
return err;
}
static ssize_t cap_show(struct dma_chan *c, char *page)
{
struct dma_device *dma = c->device;
return sprintf(page, "copy%s%s%s%s%s\n",
dma_has_cap(DMA_PQ, dma->cap_mask) ? " pq" : "",
dma_has_cap(DMA_PQ_VAL, dma->cap_mask) ? " pq_val" : "",
dma_has_cap(DMA_XOR, dma->cap_mask) ? " xor" : "",
dma_has_cap(DMA_XOR_VAL, dma->cap_mask) ? " xor_val" : "",
dma_has_cap(DMA_INTERRUPT, dma->cap_mask) ? " intr" : "");
}
struct ioat_sysfs_entry ioat_cap_attr = __ATTR_RO(cap);
static ssize_t version_show(struct dma_chan *c, char *page)
{
struct dma_device *dma = c->device;
struct ioatdma_device *device = to_ioatdma_device(dma);
return sprintf(page, "%d.%d\n",
device->version >> 4, device->version & 0xf);
}
struct ioat_sysfs_entry ioat_version_attr = __ATTR_RO(version);
static ssize_t
ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
{
struct ioat_sysfs_entry *entry;
struct ioat_chan_common *chan;
entry = container_of(attr, struct ioat_sysfs_entry, attr);
chan = container_of(kobj, struct ioat_chan_common, kobj);
if (!entry->show)
return -EIO;
return entry->show(&chan->common, page);
}
const struct sysfs_ops ioat_sysfs_ops = {
.show = ioat_attr_show,
};
void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type)
{
struct dma_device *dma = &device->common;
struct dma_chan *c;
list_for_each_entry(c, &dma->channels, device_node) {
struct ioat_chan_common *chan = to_chan_common(c);
struct kobject *parent = &c->dev->device.kobj;
int err;
err = kobject_init_and_add(&chan->kobj, type, parent, "quickdata");
if (err) {
dev_warn(to_dev(chan),
"sysfs init error (%d), continuing...\n", err);
kobject_put(&chan->kobj);
set_bit(IOAT_KOBJ_INIT_FAIL, &chan->state);
}
}
}
void ioat_kobject_del(struct ioatdma_device *device)
{
struct dma_device *dma = &device->common;
struct dma_chan *c;
list_for_each_entry(c, &dma->channels, device_node) {
struct ioat_chan_common *chan = to_chan_common(c);
if (!test_bit(IOAT_KOBJ_INIT_FAIL, &chan->state)) {
kobject_del(&chan->kobj);
kobject_put(&chan->kobj);
}
}
}
void ioat_dma_remove(struct ioatdma_device *device)
{
struct dma_device *dma = &device->common;
ioat_disable_interrupts(device);
ioat_kobject_del(device);
dma_async_device_unregister(dma);
pci_pool_destroy(device->dma_pool);
pci_pool_destroy(device->completion_pool);
INIT_LIST_HEAD(&dma->channels);
}