linux/drivers/infiniband/core/uverbs_cmd.c

2182 lines
53 KiB
C
Raw Normal View History

/*
* Copyright (c) 2005 Topspin Communications. All rights reserved.
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
* Copyright (c) 2005, 2006, 2007 Cisco Systems. All rights reserved.
* Copyright (c) 2005 PathScale, Inc. All rights reserved.
* Copyright (c) 2006 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/file.h>
#include <linux/fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <asm/uaccess.h>
#include "uverbs.h"
static struct lock_class_key pd_lock_key;
static struct lock_class_key mr_lock_key;
static struct lock_class_key cq_lock_key;
static struct lock_class_key qp_lock_key;
static struct lock_class_key ah_lock_key;
static struct lock_class_key srq_lock_key;
#define INIT_UDATA(udata, ibuf, obuf, ilen, olen) \
do { \
(udata)->inbuf = (void __user *) (ibuf); \
(udata)->outbuf = (void __user *) (obuf); \
(udata)->inlen = (ilen); \
(udata)->outlen = (olen); \
} while (0)
/*
* The ib_uobject locking scheme is as follows:
*
* - ib_uverbs_idr_lock protects the uverbs idrs themselves, so it
* needs to be held during all idr operations. When an object is
* looked up, a reference must be taken on the object's kref before
* dropping this lock.
*
* - Each object also has an rwsem. This rwsem must be held for
* reading while an operation that uses the object is performed.
* For example, while registering an MR, the associated PD's
* uobject.mutex must be held for reading. The rwsem must be held
* for writing while initializing or destroying an object.
*
* - In addition, each object has a "live" flag. If this flag is not
* set, then lookups of the object will fail even if it is found in
* the idr. This handles a reader that blocks and does not acquire
* the rwsem until after the object is destroyed. The destroy
* operation will set the live flag to 0 and then drop the rwsem;
* this will allow the reader to acquire the rwsem, see that the
* live flag is 0, and then drop the rwsem and its reference to
* object. The underlying storage will not be freed until the last
* reference to the object is dropped.
*/
static void init_uobj(struct ib_uobject *uobj, u64 user_handle,
struct ib_ucontext *context, struct lock_class_key *key)
{
uobj->user_handle = user_handle;
uobj->context = context;
kref_init(&uobj->ref);
init_rwsem(&uobj->mutex);
lockdep_set_class(&uobj->mutex, key);
uobj->live = 0;
}
static void release_uobj(struct kref *kref)
{
kfree(container_of(kref, struct ib_uobject, ref));
}
static void put_uobj(struct ib_uobject *uobj)
{
kref_put(&uobj->ref, release_uobj);
}
static void put_uobj_read(struct ib_uobject *uobj)
{
up_read(&uobj->mutex);
put_uobj(uobj);
}
static void put_uobj_write(struct ib_uobject *uobj)
{
up_write(&uobj->mutex);
put_uobj(uobj);
}
static int idr_add_uobj(struct idr *idr, struct ib_uobject *uobj)
{
int ret;
retry:
if (!idr_pre_get(idr, GFP_KERNEL))
return -ENOMEM;
spin_lock(&ib_uverbs_idr_lock);
ret = idr_get_new(idr, uobj, &uobj->id);
spin_unlock(&ib_uverbs_idr_lock);
if (ret == -EAGAIN)
goto retry;
return ret;
}
void idr_remove_uobj(struct idr *idr, struct ib_uobject *uobj)
{
spin_lock(&ib_uverbs_idr_lock);
idr_remove(idr, uobj->id);
spin_unlock(&ib_uverbs_idr_lock);
}
static struct ib_uobject *__idr_get_uobj(struct idr *idr, int id,
struct ib_ucontext *context)
{
struct ib_uobject *uobj;
spin_lock(&ib_uverbs_idr_lock);
uobj = idr_find(idr, id);
if (uobj) {
if (uobj->context == context)
kref_get(&uobj->ref);
else
uobj = NULL;
}
spin_unlock(&ib_uverbs_idr_lock);
return uobj;
}
static struct ib_uobject *idr_read_uobj(struct idr *idr, int id,
struct ib_ucontext *context, int nested)
{
struct ib_uobject *uobj;
uobj = __idr_get_uobj(idr, id, context);
if (!uobj)
return NULL;
if (nested)
down_read_nested(&uobj->mutex, SINGLE_DEPTH_NESTING);
else
down_read(&uobj->mutex);
if (!uobj->live) {
put_uobj_read(uobj);
return NULL;
}
return uobj;
}
static struct ib_uobject *idr_write_uobj(struct idr *idr, int id,
struct ib_ucontext *context)
{
struct ib_uobject *uobj;
uobj = __idr_get_uobj(idr, id, context);
if (!uobj)
return NULL;
down_write(&uobj->mutex);
if (!uobj->live) {
put_uobj_write(uobj);
return NULL;
}
return uobj;
}
static void *idr_read_obj(struct idr *idr, int id, struct ib_ucontext *context,
int nested)
{
struct ib_uobject *uobj;
uobj = idr_read_uobj(idr, id, context, nested);
return uobj ? uobj->object : NULL;
}
static struct ib_pd *idr_read_pd(int pd_handle, struct ib_ucontext *context)
{
return idr_read_obj(&ib_uverbs_pd_idr, pd_handle, context, 0);
}
static void put_pd_read(struct ib_pd *pd)
{
put_uobj_read(pd->uobject);
}
static struct ib_cq *idr_read_cq(int cq_handle, struct ib_ucontext *context, int nested)
{
return idr_read_obj(&ib_uverbs_cq_idr, cq_handle, context, nested);
}
static void put_cq_read(struct ib_cq *cq)
{
put_uobj_read(cq->uobject);
}
static struct ib_ah *idr_read_ah(int ah_handle, struct ib_ucontext *context)
{
return idr_read_obj(&ib_uverbs_ah_idr, ah_handle, context, 0);
}
static void put_ah_read(struct ib_ah *ah)
{
put_uobj_read(ah->uobject);
}
static struct ib_qp *idr_read_qp(int qp_handle, struct ib_ucontext *context)
{
return idr_read_obj(&ib_uverbs_qp_idr, qp_handle, context, 0);
}
static void put_qp_read(struct ib_qp *qp)
{
put_uobj_read(qp->uobject);
}
static struct ib_srq *idr_read_srq(int srq_handle, struct ib_ucontext *context)
{
return idr_read_obj(&ib_uverbs_srq_idr, srq_handle, context, 0);
}
static void put_srq_read(struct ib_srq *srq)
{
put_uobj_read(srq->uobject);
}
ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
{
struct ib_uverbs_get_context cmd;
struct ib_uverbs_get_context_resp resp;
struct ib_udata udata;
struct ib_device *ibdev = file->device->ib_dev;
struct ib_ucontext *ucontext;
struct file *filp;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
mutex_lock(&file->mutex);
if (file->ucontext) {
ret = -EINVAL;
goto err;
}
INIT_UDATA(&udata, buf + sizeof cmd,
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
ucontext = ibdev->alloc_ucontext(ibdev, &udata);
if (IS_ERR(ucontext)) {
ret = PTR_ERR(ucontext);
goto err;
}
ucontext->device = ibdev;
INIT_LIST_HEAD(&ucontext->pd_list);
INIT_LIST_HEAD(&ucontext->mr_list);
INIT_LIST_HEAD(&ucontext->mw_list);
INIT_LIST_HEAD(&ucontext->cq_list);
INIT_LIST_HEAD(&ucontext->qp_list);
INIT_LIST_HEAD(&ucontext->srq_list);
INIT_LIST_HEAD(&ucontext->ah_list);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
ucontext->closing = 0;
resp.num_comp_vectors = file->device->num_comp_vectors;
ret = get_unused_fd();
if (ret < 0)
goto err_free;
resp.async_fd = ret;
filp = ib_uverbs_alloc_event_file(file, 1);
if (IS_ERR(filp)) {
ret = PTR_ERR(filp);
goto err_fd;
}
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
goto err_file;
}
file->async_file = filp->private_data;
INIT_IB_EVENT_HANDLER(&file->event_handler, file->device->ib_dev,
ib_uverbs_event_handler);
ret = ib_register_event_handler(&file->event_handler);
if (ret)
goto err_file;
kref_get(&file->async_file->ref);
kref_get(&file->ref);
file->ucontext = ucontext;
fd_install(resp.async_fd, filp);
mutex_unlock(&file->mutex);
return in_len;
err_file:
fput(filp);
err_fd:
put_unused_fd(resp.async_fd);
err_free:
ibdev->dealloc_ucontext(ucontext);
err:
mutex_unlock(&file->mutex);
return ret;
}
ssize_t ib_uverbs_query_device(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
{
struct ib_uverbs_query_device cmd;
struct ib_uverbs_query_device_resp resp;
struct ib_device_attr attr;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
ret = ib_query_device(file->device->ib_dev, &attr);
if (ret)
return ret;
memset(&resp, 0, sizeof resp);
resp.fw_ver = attr.fw_ver;
resp.node_guid = file->device->ib_dev->node_guid;
resp.sys_image_guid = attr.sys_image_guid;
resp.max_mr_size = attr.max_mr_size;
resp.page_size_cap = attr.page_size_cap;
resp.vendor_id = attr.vendor_id;
resp.vendor_part_id = attr.vendor_part_id;
resp.hw_ver = attr.hw_ver;
resp.max_qp = attr.max_qp;
resp.max_qp_wr = attr.max_qp_wr;
resp.device_cap_flags = attr.device_cap_flags;
resp.max_sge = attr.max_sge;
resp.max_sge_rd = attr.max_sge_rd;
resp.max_cq = attr.max_cq;
resp.max_cqe = attr.max_cqe;
resp.max_mr = attr.max_mr;
resp.max_pd = attr.max_pd;
resp.max_qp_rd_atom = attr.max_qp_rd_atom;
resp.max_ee_rd_atom = attr.max_ee_rd_atom;
resp.max_res_rd_atom = attr.max_res_rd_atom;
resp.max_qp_init_rd_atom = attr.max_qp_init_rd_atom;
resp.max_ee_init_rd_atom = attr.max_ee_init_rd_atom;
resp.atomic_cap = attr.atomic_cap;
resp.max_ee = attr.max_ee;
resp.max_rdd = attr.max_rdd;
resp.max_mw = attr.max_mw;
resp.max_raw_ipv6_qp = attr.max_raw_ipv6_qp;
resp.max_raw_ethy_qp = attr.max_raw_ethy_qp;
resp.max_mcast_grp = attr.max_mcast_grp;
resp.max_mcast_qp_attach = attr.max_mcast_qp_attach;
resp.max_total_mcast_qp_attach = attr.max_total_mcast_qp_attach;
resp.max_ah = attr.max_ah;
resp.max_fmr = attr.max_fmr;
resp.max_map_per_fmr = attr.max_map_per_fmr;
resp.max_srq = attr.max_srq;
resp.max_srq_wr = attr.max_srq_wr;
resp.max_srq_sge = attr.max_srq_sge;
resp.max_pkeys = attr.max_pkeys;
resp.local_ca_ack_delay = attr.local_ca_ack_delay;
resp.phys_port_cnt = file->device->ib_dev->phys_port_cnt;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
return -EFAULT;
return in_len;
}
ssize_t ib_uverbs_query_port(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
{
struct ib_uverbs_query_port cmd;
struct ib_uverbs_query_port_resp resp;
struct ib_port_attr attr;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
ret = ib_query_port(file->device->ib_dev, cmd.port_num, &attr);
if (ret)
return ret;
memset(&resp, 0, sizeof resp);
resp.state = attr.state;
resp.max_mtu = attr.max_mtu;
resp.active_mtu = attr.active_mtu;
resp.gid_tbl_len = attr.gid_tbl_len;
resp.port_cap_flags = attr.port_cap_flags;
resp.max_msg_sz = attr.max_msg_sz;
resp.bad_pkey_cntr = attr.bad_pkey_cntr;
resp.qkey_viol_cntr = attr.qkey_viol_cntr;
resp.pkey_tbl_len = attr.pkey_tbl_len;
resp.lid = attr.lid;
resp.sm_lid = attr.sm_lid;
resp.lmc = attr.lmc;
resp.max_vl_num = attr.max_vl_num;
resp.sm_sl = attr.sm_sl;
resp.subnet_timeout = attr.subnet_timeout;
resp.init_type_reply = attr.init_type_reply;
resp.active_width = attr.active_width;
resp.active_speed = attr.active_speed;
resp.phys_state = attr.phys_state;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
return -EFAULT;
return in_len;
}
ssize_t ib_uverbs_alloc_pd(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
{
struct ib_uverbs_alloc_pd cmd;
struct ib_uverbs_alloc_pd_resp resp;
struct ib_udata udata;
struct ib_uobject *uobj;
struct ib_pd *pd;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
INIT_UDATA(&udata, buf + sizeof cmd,
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
uobj = kmalloc(sizeof *uobj, GFP_KERNEL);
if (!uobj)
return -ENOMEM;
init_uobj(uobj, 0, file->ucontext, &pd_lock_key);
down_write(&uobj->mutex);
pd = file->device->ib_dev->alloc_pd(file->device->ib_dev,
file->ucontext, &udata);
if (IS_ERR(pd)) {
ret = PTR_ERR(pd);
goto err;
}
pd->device = file->device->ib_dev;
pd->uobject = uobj;
atomic_set(&pd->usecnt, 0);
uobj->object = pd;
ret = idr_add_uobj(&ib_uverbs_pd_idr, uobj);
if (ret)
goto err_idr;
memset(&resp, 0, sizeof resp);
resp.pd_handle = uobj->id;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
goto err_copy;
}
mutex_lock(&file->mutex);
list_add_tail(&uobj->list, &file->ucontext->pd_list);
mutex_unlock(&file->mutex);
uobj->live = 1;
up_write(&uobj->mutex);
return in_len;
err_copy:
idr_remove_uobj(&ib_uverbs_pd_idr, uobj);
err_idr:
ib_dealloc_pd(pd);
err:
put_uobj_write(uobj);
return ret;
}
ssize_t ib_uverbs_dealloc_pd(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
{
struct ib_uverbs_dealloc_pd cmd;
struct ib_uobject *uobj;
int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
uobj = idr_write_uobj(&ib_uverbs_pd_idr, cmd.pd_handle, file->ucontext);
if (!uobj)
return -EINVAL;
ret = ib_dealloc_pd(uobj->object);
if (!ret)
uobj->live = 0;
put_uobj_write(uobj);
if (ret)
return ret;
idr_remove_uobj(&ib_uverbs_pd_idr, uobj);
mutex_lock(&file->mutex);
list_del(&uobj->list);
mutex_unlock(&file->mutex);
put_uobj(uobj);
return in_len;
}
ssize_t ib_uverbs_reg_mr(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_reg_mr cmd;
struct ib_uverbs_reg_mr_resp resp;
struct ib_udata udata;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
struct ib_uobject *uobj;
struct ib_pd *pd;
struct ib_mr *mr;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
INIT_UDATA(&udata, buf + sizeof cmd,
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
if ((cmd.start & ~PAGE_MASK) != (cmd.hca_va & ~PAGE_MASK))
return -EINVAL;
/*
* Local write permission is required if remote write or
* remote atomic permission is also requested.
*/
if (cmd.access_flags & (IB_ACCESS_REMOTE_ATOMIC | IB_ACCESS_REMOTE_WRITE) &&
!(cmd.access_flags & IB_ACCESS_LOCAL_WRITE))
return -EINVAL;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
uobj = kmalloc(sizeof *uobj, GFP_KERNEL);
if (!uobj)
return -ENOMEM;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
init_uobj(uobj, 0, file->ucontext, &mr_lock_key);
down_write(&uobj->mutex);
pd = idr_read_pd(cmd.pd_handle, file->ucontext);
if (!pd) {
ret = -EINVAL;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
goto err_free;
}
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
mr = pd->device->reg_user_mr(pd, cmd.start, cmd.length, cmd.hca_va,
cmd.access_flags, &udata);
if (IS_ERR(mr)) {
ret = PTR_ERR(mr);
goto err_put;
}
mr->device = pd->device;
mr->pd = pd;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
mr->uobject = uobj;
atomic_inc(&pd->usecnt);
atomic_set(&mr->usecnt, 0);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
uobj->object = mr;
ret = idr_add_uobj(&ib_uverbs_mr_idr, uobj);
if (ret)
goto err_unreg;
memset(&resp, 0, sizeof resp);
resp.lkey = mr->lkey;
resp.rkey = mr->rkey;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
resp.mr_handle = uobj->id;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
goto err_copy;
}
put_pd_read(pd);
mutex_lock(&file->mutex);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
list_add_tail(&uobj->list, &file->ucontext->mr_list);
mutex_unlock(&file->mutex);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
uobj->live = 1;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
up_write(&uobj->mutex);
return in_len;
err_copy:
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
idr_remove_uobj(&ib_uverbs_mr_idr, uobj);
err_unreg:
ib_dereg_mr(mr);
err_put:
put_pd_read(pd);
err_free:
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
put_uobj_write(uobj);
return ret;
}
ssize_t ib_uverbs_dereg_mr(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_dereg_mr cmd;
struct ib_mr *mr;
struct ib_uobject *uobj;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
uobj = idr_write_uobj(&ib_uverbs_mr_idr, cmd.mr_handle, file->ucontext);
if (!uobj)
return -EINVAL;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 00:15:11 +00:00
mr = uobj->object;
ret = ib_dereg_mr(mr);
if (!ret)
uobj->live = 0;
put_uobj_write(uobj);
if (ret)
return ret;
idr_remove_uobj(&ib_uverbs_mr_idr, uobj);
mutex_lock(&file->mutex);
list_del(&uobj->list);
mutex_unlock(&file->mutex);
put_uobj(uobj);
return in_len;
}
ssize_t ib_uverbs_create_comp_channel(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_create_comp_channel cmd;
struct ib_uverbs_create_comp_channel_resp resp;
struct file *filp;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
ret = get_unused_fd();
if (ret < 0)
return ret;
resp.fd = ret;
filp = ib_uverbs_alloc_event_file(file, 0);
if (IS_ERR(filp)) {
put_unused_fd(resp.fd);
return PTR_ERR(filp);
}
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
put_unused_fd(resp.fd);
fput(filp);
return -EFAULT;
}
fd_install(resp.fd, filp);
return in_len;
}
ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_create_cq cmd;
struct ib_uverbs_create_cq_resp resp;
struct ib_udata udata;
struct ib_ucq_object *obj;
struct ib_uverbs_event_file *ev_file = NULL;
struct ib_cq *cq;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
INIT_UDATA(&udata, buf + sizeof cmd,
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
if (cmd.comp_vector >= file->device->num_comp_vectors)
return -EINVAL;
obj = kmalloc(sizeof *obj, GFP_KERNEL);
if (!obj)
return -ENOMEM;
init_uobj(&obj->uobject, cmd.user_handle, file->ucontext, &cq_lock_key);
down_write(&obj->uobject.mutex);
if (cmd.comp_channel >= 0) {
ev_file = ib_uverbs_lookup_comp_file(cmd.comp_channel);
if (!ev_file) {
ret = -EINVAL;
goto err;
}
}
obj->uverbs_file = file;
obj->comp_events_reported = 0;
obj->async_events_reported = 0;
INIT_LIST_HEAD(&obj->comp_list);
INIT_LIST_HEAD(&obj->async_list);
cq = file->device->ib_dev->create_cq(file->device->ib_dev, cmd.cqe,
cmd.comp_vector,
file->ucontext, &udata);
if (IS_ERR(cq)) {
ret = PTR_ERR(cq);
goto err_file;
}
cq->device = file->device->ib_dev;
cq->uobject = &obj->uobject;
cq->comp_handler = ib_uverbs_comp_handler;
cq->event_handler = ib_uverbs_cq_event_handler;
cq->cq_context = ev_file;
atomic_set(&cq->usecnt, 0);
obj->uobject.object = cq;
ret = idr_add_uobj(&ib_uverbs_cq_idr, &obj->uobject);
if (ret)
goto err_free;
memset(&resp, 0, sizeof resp);
resp.cq_handle = obj->uobject.id;
resp.cqe = cq->cqe;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
goto err_copy;
}
mutex_lock(&file->mutex);
list_add_tail(&obj->uobject.list, &file->ucontext->cq_list);
mutex_unlock(&file->mutex);
obj->uobject.live = 1;
up_write(&obj->uobject.mutex);
return in_len;
err_copy:
idr_remove_uobj(&ib_uverbs_cq_idr, &obj->uobject);
err_free:
ib_destroy_cq(cq);
err_file:
if (ev_file)
ib_uverbs_release_ucq(file, ev_file, obj);
err:
put_uobj_write(&obj->uobject);
return ret;
}
ssize_t ib_uverbs_resize_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_resize_cq cmd;
struct ib_uverbs_resize_cq_resp resp;
struct ib_udata udata;
struct ib_cq *cq;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
INIT_UDATA(&udata, buf + sizeof cmd,
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
cq = idr_read_cq(cmd.cq_handle, file->ucontext, 0);
if (!cq)
return -EINVAL;
ret = cq->device->resize_cq(cq, cmd.cqe, &udata);
if (ret)
goto out;
resp.cqe = cq->cqe;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp.cqe))
ret = -EFAULT;
out:
put_cq_read(cq);
return ret ? ret : in_len;
}
ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_poll_cq cmd;
struct ib_uverbs_poll_cq_resp *resp;
struct ib_cq *cq;
struct ib_wc *wc;
int ret = 0;
int i;
int rsize;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
wc = kmalloc(cmd.ne * sizeof *wc, GFP_KERNEL);
if (!wc)
return -ENOMEM;
rsize = sizeof *resp + cmd.ne * sizeof(struct ib_uverbs_wc);
resp = kmalloc(rsize, GFP_KERNEL);
if (!resp) {
ret = -ENOMEM;
goto out_wc;
}
cq = idr_read_cq(cmd.cq_handle, file->ucontext, 0);
if (!cq) {
ret = -EINVAL;
goto out;
}
resp->count = ib_poll_cq(cq, cmd.ne, wc);
put_cq_read(cq);
for (i = 0; i < resp->count; i++) {
resp->wc[i].wr_id = wc[i].wr_id;
resp->wc[i].status = wc[i].status;
resp->wc[i].opcode = wc[i].opcode;
resp->wc[i].vendor_err = wc[i].vendor_err;
resp->wc[i].byte_len = wc[i].byte_len;
RDMA/core: Add memory management extensions support This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 06:48:45 +00:00
resp->wc[i].ex.imm_data = (__u32 __force) wc[i].ex.imm_data;
resp->wc[i].qp_num = wc[i].qp->qp_num;
resp->wc[i].src_qp = wc[i].src_qp;
resp->wc[i].wc_flags = wc[i].wc_flags;
resp->wc[i].pkey_index = wc[i].pkey_index;
resp->wc[i].slid = wc[i].slid;
resp->wc[i].sl = wc[i].sl;
resp->wc[i].dlid_path_bits = wc[i].dlid_path_bits;
resp->wc[i].port_num = wc[i].port_num;
}
if (copy_to_user((void __user *) (unsigned long) cmd.response, resp, rsize))
ret = -EFAULT;
out:
kfree(resp);
out_wc:
kfree(wc);
return ret ? ret : in_len;
}
ssize_t ib_uverbs_req_notify_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_req_notify_cq cmd;
struct ib_cq *cq;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
cq = idr_read_cq(cmd.cq_handle, file->ucontext, 0);
if (!cq)
return -EINVAL;
ib_req_notify_cq(cq, cmd.solicited_only ?
IB_CQ_SOLICITED : IB_CQ_NEXT_COMP);
put_cq_read(cq);
return in_len;
}
ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_destroy_cq cmd;
struct ib_uverbs_destroy_cq_resp resp;
struct ib_uobject *uobj;
struct ib_cq *cq;
struct ib_ucq_object *obj;
struct ib_uverbs_event_file *ev_file;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
uobj = idr_write_uobj(&ib_uverbs_cq_idr, cmd.cq_handle, file->ucontext);
if (!uobj)
return -EINVAL;
cq = uobj->object;
ev_file = cq->cq_context;
obj = container_of(cq->uobject, struct ib_ucq_object, uobject);
ret = ib_destroy_cq(cq);
if (!ret)
uobj->live = 0;
put_uobj_write(uobj);
if (ret)
return ret;
idr_remove_uobj(&ib_uverbs_cq_idr, uobj);
mutex_lock(&file->mutex);
list_del(&uobj->list);
mutex_unlock(&file->mutex);
ib_uverbs_release_ucq(file, ev_file, obj);
memset(&resp, 0, sizeof resp);
resp.comp_events_reported = obj->comp_events_reported;
resp.async_events_reported = obj->async_events_reported;
put_uobj(uobj);
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
return -EFAULT;
return in_len;
}
ssize_t ib_uverbs_create_qp(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_create_qp cmd;
struct ib_uverbs_create_qp_resp resp;
struct ib_udata udata;
struct ib_uqp_object *obj;
struct ib_pd *pd;
struct ib_cq *scq, *rcq;
struct ib_srq *srq;
struct ib_qp *qp;
struct ib_qp_init_attr attr;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
INIT_UDATA(&udata, buf + sizeof cmd,
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
obj = kmalloc(sizeof *obj, GFP_KERNEL);
if (!obj)
return -ENOMEM;
init_uobj(&obj->uevent.uobject, cmd.user_handle, file->ucontext, &qp_lock_key);
down_write(&obj->uevent.uobject.mutex);
srq = cmd.is_srq ? idr_read_srq(cmd.srq_handle, file->ucontext) : NULL;
pd = idr_read_pd(cmd.pd_handle, file->ucontext);
scq = idr_read_cq(cmd.send_cq_handle, file->ucontext, 0);
rcq = cmd.recv_cq_handle == cmd.send_cq_handle ?
scq : idr_read_cq(cmd.recv_cq_handle, file->ucontext, 1);
if (!pd || !scq || !rcq || (cmd.is_srq && !srq)) {
ret = -EINVAL;
goto err_put;
}
attr.event_handler = ib_uverbs_qp_event_handler;
attr.qp_context = file;
attr.send_cq = scq;
attr.recv_cq = rcq;
attr.srq = srq;
attr.sq_sig_type = cmd.sq_sig_all ? IB_SIGNAL_ALL_WR : IB_SIGNAL_REQ_WR;
attr.qp_type = cmd.qp_type;
attr.create_flags = 0;
attr.cap.max_send_wr = cmd.max_send_wr;
attr.cap.max_recv_wr = cmd.max_recv_wr;
attr.cap.max_send_sge = cmd.max_send_sge;
attr.cap.max_recv_sge = cmd.max_recv_sge;
attr.cap.max_inline_data = cmd.max_inline_data;
obj->uevent.events_reported = 0;
INIT_LIST_HEAD(&obj->uevent.event_list);
INIT_LIST_HEAD(&obj->mcast_list);
qp = pd->device->create_qp(pd, &attr, &udata);
if (IS_ERR(qp)) {
ret = PTR_ERR(qp);
goto err_put;
}
qp->device = pd->device;
qp->pd = pd;
qp->send_cq = attr.send_cq;
qp->recv_cq = attr.recv_cq;
qp->srq = attr.srq;
qp->uobject = &obj->uevent.uobject;
qp->event_handler = attr.event_handler;
qp->qp_context = attr.qp_context;
qp->qp_type = attr.qp_type;
atomic_inc(&pd->usecnt);
atomic_inc(&attr.send_cq->usecnt);
atomic_inc(&attr.recv_cq->usecnt);
if (attr.srq)
atomic_inc(&attr.srq->usecnt);
obj->uevent.uobject.object = qp;
ret = idr_add_uobj(&ib_uverbs_qp_idr, &obj->uevent.uobject);
if (ret)
goto err_destroy;
memset(&resp, 0, sizeof resp);
resp.qpn = qp->qp_num;
resp.qp_handle = obj->uevent.uobject.id;
resp.max_recv_sge = attr.cap.max_recv_sge;
resp.max_send_sge = attr.cap.max_send_sge;
resp.max_recv_wr = attr.cap.max_recv_wr;
resp.max_send_wr = attr.cap.max_send_wr;
resp.max_inline_data = attr.cap.max_inline_data;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
goto err_copy;
}
put_pd_read(pd);
put_cq_read(scq);
if (rcq != scq)
put_cq_read(rcq);
if (srq)
put_srq_read(srq);
mutex_lock(&file->mutex);
list_add_tail(&obj->uevent.uobject.list, &file->ucontext->qp_list);
mutex_unlock(&file->mutex);
obj->uevent.uobject.live = 1;
up_write(&obj->uevent.uobject.mutex);
return in_len;
err_copy:
idr_remove_uobj(&ib_uverbs_qp_idr, &obj->uevent.uobject);
err_destroy:
ib_destroy_qp(qp);
err_put:
if (pd)
put_pd_read(pd);
if (scq)
put_cq_read(scq);
if (rcq && rcq != scq)
put_cq_read(rcq);
if (srq)
put_srq_read(srq);
put_uobj_write(&obj->uevent.uobject);
return ret;
}
ssize_t ib_uverbs_query_qp(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_query_qp cmd;
struct ib_uverbs_query_qp_resp resp;
struct ib_qp *qp;
struct ib_qp_attr *attr;
struct ib_qp_init_attr *init_attr;
int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
attr = kmalloc(sizeof *attr, GFP_KERNEL);
init_attr = kmalloc(sizeof *init_attr, GFP_KERNEL);
if (!attr || !init_attr) {
ret = -ENOMEM;
goto out;
}
qp = idr_read_qp(cmd.qp_handle, file->ucontext);
if (!qp) {
ret = -EINVAL;
goto out;
}
ret = ib_query_qp(qp, attr, cmd.attr_mask, init_attr);
put_qp_read(qp);
if (ret)
goto out;
memset(&resp, 0, sizeof resp);
resp.qp_state = attr->qp_state;
resp.cur_qp_state = attr->cur_qp_state;
resp.path_mtu = attr->path_mtu;
resp.path_mig_state = attr->path_mig_state;
resp.qkey = attr->qkey;
resp.rq_psn = attr->rq_psn;
resp.sq_psn = attr->sq_psn;
resp.dest_qp_num = attr->dest_qp_num;
resp.qp_access_flags = attr->qp_access_flags;
resp.pkey_index = attr->pkey_index;
resp.alt_pkey_index = attr->alt_pkey_index;
resp.sq_draining = attr->sq_draining;
resp.max_rd_atomic = attr->max_rd_atomic;
resp.max_dest_rd_atomic = attr->max_dest_rd_atomic;
resp.min_rnr_timer = attr->min_rnr_timer;
resp.port_num = attr->port_num;
resp.timeout = attr->timeout;
resp.retry_cnt = attr->retry_cnt;
resp.rnr_retry = attr->rnr_retry;
resp.alt_port_num = attr->alt_port_num;
resp.alt_timeout = attr->alt_timeout;
memcpy(resp.dest.dgid, attr->ah_attr.grh.dgid.raw, 16);
resp.dest.flow_label = attr->ah_attr.grh.flow_label;
resp.dest.sgid_index = attr->ah_attr.grh.sgid_index;
resp.dest.hop_limit = attr->ah_attr.grh.hop_limit;
resp.dest.traffic_class = attr->ah_attr.grh.traffic_class;
resp.dest.dlid = attr->ah_attr.dlid;
resp.dest.sl = attr->ah_attr.sl;
resp.dest.src_path_bits = attr->ah_attr.src_path_bits;
resp.dest.static_rate = attr->ah_attr.static_rate;
resp.dest.is_global = !!(attr->ah_attr.ah_flags & IB_AH_GRH);
resp.dest.port_num = attr->ah_attr.port_num;
memcpy(resp.alt_dest.dgid, attr->alt_ah_attr.grh.dgid.raw, 16);
resp.alt_dest.flow_label = attr->alt_ah_attr.grh.flow_label;
resp.alt_dest.sgid_index = attr->alt_ah_attr.grh.sgid_index;
resp.alt_dest.hop_limit = attr->alt_ah_attr.grh.hop_limit;
resp.alt_dest.traffic_class = attr->alt_ah_attr.grh.traffic_class;
resp.alt_dest.dlid = attr->alt_ah_attr.dlid;
resp.alt_dest.sl = attr->alt_ah_attr.sl;
resp.alt_dest.src_path_bits = attr->alt_ah_attr.src_path_bits;
resp.alt_dest.static_rate = attr->alt_ah_attr.static_rate;
resp.alt_dest.is_global = !!(attr->alt_ah_attr.ah_flags & IB_AH_GRH);
resp.alt_dest.port_num = attr->alt_ah_attr.port_num;
resp.max_send_wr = init_attr->cap.max_send_wr;
resp.max_recv_wr = init_attr->cap.max_recv_wr;
resp.max_send_sge = init_attr->cap.max_send_sge;
resp.max_recv_sge = init_attr->cap.max_recv_sge;
resp.max_inline_data = init_attr->cap.max_inline_data;
resp.sq_sig_all = init_attr->sq_sig_type == IB_SIGNAL_ALL_WR;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
ret = -EFAULT;
out:
kfree(attr);
kfree(init_attr);
return ret ? ret : in_len;
}
ssize_t ib_uverbs_modify_qp(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_modify_qp cmd;
struct ib_udata udata;
struct ib_qp *qp;
struct ib_qp_attr *attr;
int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
INIT_UDATA(&udata, buf + sizeof cmd, NULL, in_len - sizeof cmd,
out_len);
attr = kmalloc(sizeof *attr, GFP_KERNEL);
if (!attr)
return -ENOMEM;
qp = idr_read_qp(cmd.qp_handle, file->ucontext);
if (!qp) {
ret = -EINVAL;
goto out;
}
attr->qp_state = cmd.qp_state;
attr->cur_qp_state = cmd.cur_qp_state;
attr->path_mtu = cmd.path_mtu;
attr->path_mig_state = cmd.path_mig_state;
attr->qkey = cmd.qkey;
attr->rq_psn = cmd.rq_psn;
attr->sq_psn = cmd.sq_psn;
attr->dest_qp_num = cmd.dest_qp_num;
attr->qp_access_flags = cmd.qp_access_flags;
attr->pkey_index = cmd.pkey_index;
attr->alt_pkey_index = cmd.alt_pkey_index;
attr->en_sqd_async_notify = cmd.en_sqd_async_notify;
attr->max_rd_atomic = cmd.max_rd_atomic;
attr->max_dest_rd_atomic = cmd.max_dest_rd_atomic;
attr->min_rnr_timer = cmd.min_rnr_timer;
attr->port_num = cmd.port_num;
attr->timeout = cmd.timeout;
attr->retry_cnt = cmd.retry_cnt;
attr->rnr_retry = cmd.rnr_retry;
attr->alt_port_num = cmd.alt_port_num;
attr->alt_timeout = cmd.alt_timeout;
memcpy(attr->ah_attr.grh.dgid.raw, cmd.dest.dgid, 16);
attr->ah_attr.grh.flow_label = cmd.dest.flow_label;
attr->ah_attr.grh.sgid_index = cmd.dest.sgid_index;
attr->ah_attr.grh.hop_limit = cmd.dest.hop_limit;
attr->ah_attr.grh.traffic_class = cmd.dest.traffic_class;
attr->ah_attr.dlid = cmd.dest.dlid;
attr->ah_attr.sl = cmd.dest.sl;
attr->ah_attr.src_path_bits = cmd.dest.src_path_bits;
attr->ah_attr.static_rate = cmd.dest.static_rate;
attr->ah_attr.ah_flags = cmd.dest.is_global ? IB_AH_GRH : 0;
attr->ah_attr.port_num = cmd.dest.port_num;
memcpy(attr->alt_ah_attr.grh.dgid.raw, cmd.alt_dest.dgid, 16);
attr->alt_ah_attr.grh.flow_label = cmd.alt_dest.flow_label;
attr->alt_ah_attr.grh.sgid_index = cmd.alt_dest.sgid_index;
attr->alt_ah_attr.grh.hop_limit = cmd.alt_dest.hop_limit;
attr->alt_ah_attr.grh.traffic_class = cmd.alt_dest.traffic_class;
attr->alt_ah_attr.dlid = cmd.alt_dest.dlid;
attr->alt_ah_attr.sl = cmd.alt_dest.sl;
attr->alt_ah_attr.src_path_bits = cmd.alt_dest.src_path_bits;
attr->alt_ah_attr.static_rate = cmd.alt_dest.static_rate;
attr->alt_ah_attr.ah_flags = cmd.alt_dest.is_global ? IB_AH_GRH : 0;
attr->alt_ah_attr.port_num = cmd.alt_dest.port_num;
ret = qp->device->modify_qp(qp, attr, cmd.attr_mask, &udata);
put_qp_read(qp);
if (ret)
goto out;
ret = in_len;
out:
kfree(attr);
return ret;
}
ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_destroy_qp cmd;
struct ib_uverbs_destroy_qp_resp resp;
struct ib_uobject *uobj;
struct ib_qp *qp;
struct ib_uqp_object *obj;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
memset(&resp, 0, sizeof resp);
uobj = idr_write_uobj(&ib_uverbs_qp_idr, cmd.qp_handle, file->ucontext);
if (!uobj)
return -EINVAL;
qp = uobj->object;
obj = container_of(uobj, struct ib_uqp_object, uevent.uobject);
if (!list_empty(&obj->mcast_list)) {
put_uobj_write(uobj);
return -EBUSY;
}
ret = ib_destroy_qp(qp);
if (!ret)
uobj->live = 0;
put_uobj_write(uobj);
if (ret)
return ret;
idr_remove_uobj(&ib_uverbs_qp_idr, uobj);
mutex_lock(&file->mutex);
list_del(&uobj->list);
mutex_unlock(&file->mutex);
ib_uverbs_release_uevent(file, &obj->uevent);
resp.events_reported = obj->uevent.events_reported;
put_uobj(uobj);
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
return -EFAULT;
return in_len;
}
ssize_t ib_uverbs_post_send(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_post_send cmd;
struct ib_uverbs_post_send_resp resp;
struct ib_uverbs_send_wr *user_wr;
struct ib_send_wr *wr = NULL, *last, *next, *bad_wr;
struct ib_qp *qp;
int i, sg_ind;
int is_ud;
ssize_t ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
if (in_len < sizeof cmd + cmd.wqe_size * cmd.wr_count +
cmd.sge_count * sizeof (struct ib_uverbs_sge))
return -EINVAL;
if (cmd.wqe_size < sizeof (struct ib_uverbs_send_wr))
return -EINVAL;
user_wr = kmalloc(cmd.wqe_size, GFP_KERNEL);
if (!user_wr)
return -ENOMEM;
qp = idr_read_qp(cmd.qp_handle, file->ucontext);
if (!qp)
goto out;
is_ud = qp->qp_type == IB_QPT_UD;
sg_ind = 0;
last = NULL;
for (i = 0; i < cmd.wr_count; ++i) {
if (copy_from_user(user_wr,
buf + sizeof cmd + i * cmd.wqe_size,
cmd.wqe_size)) {
ret = -EFAULT;
goto out_put;
}
if (user_wr->num_sge + sg_ind > cmd.sge_count) {
ret = -EINVAL;
goto out_put;
}
next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) +
user_wr->num_sge * sizeof (struct ib_sge),
GFP_KERNEL);
if (!next) {
ret = -ENOMEM;
goto out_put;
}
if (!last)
wr = next;
else
last->next = next;
last = next;
next->next = NULL;
next->wr_id = user_wr->wr_id;
next->num_sge = user_wr->num_sge;
next->opcode = user_wr->opcode;
next->send_flags = user_wr->send_flags;
if (is_ud) {
next->wr.ud.ah = idr_read_ah(user_wr->wr.ud.ah,
file->ucontext);
if (!next->wr.ud.ah) {
ret = -EINVAL;
goto out_put;
}
next->wr.ud.remote_qpn = user_wr->wr.ud.remote_qpn;
next->wr.ud.remote_qkey = user_wr->wr.ud.remote_qkey;
} else {
switch (next->opcode) {
case IB_WR_RDMA_WRITE_WITH_IMM:
2008-04-17 04:09:32 +00:00
next->ex.imm_data =
(__be32 __force) user_wr->ex.imm_data;
case IB_WR_RDMA_WRITE:
case IB_WR_RDMA_READ:
next->wr.rdma.remote_addr =
user_wr->wr.rdma.remote_addr;
next->wr.rdma.rkey =
user_wr->wr.rdma.rkey;
break;
2008-04-17 04:09:32 +00:00
case IB_WR_SEND_WITH_IMM:
next->ex.imm_data =
(__be32 __force) user_wr->ex.imm_data;
break;
case IB_WR_SEND_WITH_INV:
next->ex.invalidate_rkey =
user_wr->ex.invalidate_rkey;
break;
case IB_WR_ATOMIC_CMP_AND_SWP:
case IB_WR_ATOMIC_FETCH_AND_ADD:
next->wr.atomic.remote_addr =
user_wr->wr.atomic.remote_addr;
next->wr.atomic.compare_add =
user_wr->wr.atomic.compare_add;
next->wr.atomic.swap = user_wr->wr.atomic.swap;
next->wr.atomic.rkey = user_wr->wr.atomic.rkey;
break;
default:
break;
}
}
if (next->num_sge) {
next->sg_list = (void *) next +
ALIGN(sizeof *next, sizeof (struct ib_sge));
if (copy_from_user(next->sg_list,
buf + sizeof cmd +
cmd.wr_count * cmd.wqe_size +
sg_ind * sizeof (struct ib_sge),
next->num_sge * sizeof (struct ib_sge))) {
ret = -EFAULT;
goto out_put;
}
sg_ind += next->num_sge;
} else
next->sg_list = NULL;
}
resp.bad_wr = 0;
ret = qp->device->post_send(qp, wr, &bad_wr);
if (ret)
for (next = wr; next; next = next->next) {
++resp.bad_wr;
if (next == bad_wr)
break;
}
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
ret = -EFAULT;
out_put:
put_qp_read(qp);
while (wr) {
if (is_ud && wr->wr.ud.ah)
put_ah_read(wr->wr.ud.ah);
next = wr->next;
kfree(wr);
wr = next;
}
out:
kfree(user_wr);
return ret ? ret : in_len;
}
static struct ib_recv_wr *ib_uverbs_unmarshall_recv(const char __user *buf,
int in_len,
u32 wr_count,
u32 sge_count,
u32 wqe_size)
{
struct ib_uverbs_recv_wr *user_wr;
struct ib_recv_wr *wr = NULL, *last, *next;
int sg_ind;
int i;
int ret;
if (in_len < wqe_size * wr_count +
sge_count * sizeof (struct ib_uverbs_sge))
return ERR_PTR(-EINVAL);
if (wqe_size < sizeof (struct ib_uverbs_recv_wr))
return ERR_PTR(-EINVAL);
user_wr = kmalloc(wqe_size, GFP_KERNEL);
if (!user_wr)
return ERR_PTR(-ENOMEM);
sg_ind = 0;
last = NULL;
for (i = 0; i < wr_count; ++i) {
if (copy_from_user(user_wr, buf + i * wqe_size,
wqe_size)) {
ret = -EFAULT;
goto err;
}
if (user_wr->num_sge + sg_ind > sge_count) {
ret = -EINVAL;
goto err;
}
next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) +
user_wr->num_sge * sizeof (struct ib_sge),
GFP_KERNEL);
if (!next) {
ret = -ENOMEM;
goto err;
}
if (!last)
wr = next;
else
last->next = next;
last = next;
next->next = NULL;
next->wr_id = user_wr->wr_id;
next->num_sge = user_wr->num_sge;
if (next->num_sge) {
next->sg_list = (void *) next +
ALIGN(sizeof *next, sizeof (struct ib_sge));
if (copy_from_user(next->sg_list,
buf + wr_count * wqe_size +
sg_ind * sizeof (struct ib_sge),
next->num_sge * sizeof (struct ib_sge))) {
ret = -EFAULT;
goto err;
}
sg_ind += next->num_sge;
} else
next->sg_list = NULL;
}
kfree(user_wr);
return wr;
err:
kfree(user_wr);
while (wr) {
next = wr->next;
kfree(wr);
wr = next;
}
return ERR_PTR(ret);
}
ssize_t ib_uverbs_post_recv(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_post_recv cmd;
struct ib_uverbs_post_recv_resp resp;
struct ib_recv_wr *wr, *next, *bad_wr;
struct ib_qp *qp;
ssize_t ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
wr = ib_uverbs_unmarshall_recv(buf + sizeof cmd,
in_len - sizeof cmd, cmd.wr_count,
cmd.sge_count, cmd.wqe_size);
if (IS_ERR(wr))
return PTR_ERR(wr);
qp = idr_read_qp(cmd.qp_handle, file->ucontext);
if (!qp)
goto out;
resp.bad_wr = 0;
ret = qp->device->post_recv(qp, wr, &bad_wr);
put_qp_read(qp);
if (ret)
for (next = wr; next; next = next->next) {
++resp.bad_wr;
if (next == bad_wr)
break;
}
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
ret = -EFAULT;
out:
while (wr) {
next = wr->next;
kfree(wr);
wr = next;
}
return ret ? ret : in_len;
}
ssize_t ib_uverbs_post_srq_recv(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_post_srq_recv cmd;
struct ib_uverbs_post_srq_recv_resp resp;
struct ib_recv_wr *wr, *next, *bad_wr;
struct ib_srq *srq;
ssize_t ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
wr = ib_uverbs_unmarshall_recv(buf + sizeof cmd,
in_len - sizeof cmd, cmd.wr_count,
cmd.sge_count, cmd.wqe_size);
if (IS_ERR(wr))
return PTR_ERR(wr);
srq = idr_read_srq(cmd.srq_handle, file->ucontext);
if (!srq)
goto out;
resp.bad_wr = 0;
ret = srq->device->post_srq_recv(srq, wr, &bad_wr);
put_srq_read(srq);
if (ret)
for (next = wr; next; next = next->next) {
++resp.bad_wr;
if (next == bad_wr)
break;
}
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
ret = -EFAULT;
out:
while (wr) {
next = wr->next;
kfree(wr);
wr = next;
}
return ret ? ret : in_len;
}
ssize_t ib_uverbs_create_ah(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_create_ah cmd;
struct ib_uverbs_create_ah_resp resp;
struct ib_uobject *uobj;
struct ib_pd *pd;
struct ib_ah *ah;
struct ib_ah_attr attr;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
uobj = kmalloc(sizeof *uobj, GFP_KERNEL);
if (!uobj)
return -ENOMEM;
init_uobj(uobj, cmd.user_handle, file->ucontext, &ah_lock_key);
down_write(&uobj->mutex);
pd = idr_read_pd(cmd.pd_handle, file->ucontext);
if (!pd) {
ret = -EINVAL;
goto err;
}
attr.dlid = cmd.attr.dlid;
attr.sl = cmd.attr.sl;
attr.src_path_bits = cmd.attr.src_path_bits;
attr.static_rate = cmd.attr.static_rate;
attr.ah_flags = cmd.attr.is_global ? IB_AH_GRH : 0;
attr.port_num = cmd.attr.port_num;
attr.grh.flow_label = cmd.attr.grh.flow_label;
attr.grh.sgid_index = cmd.attr.grh.sgid_index;
attr.grh.hop_limit = cmd.attr.grh.hop_limit;
attr.grh.traffic_class = cmd.attr.grh.traffic_class;
memcpy(attr.grh.dgid.raw, cmd.attr.grh.dgid, 16);
ah = ib_create_ah(pd, &attr);
if (IS_ERR(ah)) {
ret = PTR_ERR(ah);
goto err_put;
}
ah->uobject = uobj;
uobj->object = ah;
ret = idr_add_uobj(&ib_uverbs_ah_idr, uobj);
if (ret)
goto err_destroy;
resp.ah_handle = uobj->id;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
goto err_copy;
}
put_pd_read(pd);
mutex_lock(&file->mutex);
list_add_tail(&uobj->list, &file->ucontext->ah_list);
mutex_unlock(&file->mutex);
uobj->live = 1;
up_write(&uobj->mutex);
return in_len;
err_copy:
idr_remove_uobj(&ib_uverbs_ah_idr, uobj);
err_destroy:
ib_destroy_ah(ah);
err_put:
put_pd_read(pd);
err:
put_uobj_write(uobj);
return ret;
}
ssize_t ib_uverbs_destroy_ah(struct ib_uverbs_file *file,
const char __user *buf, int in_len, int out_len)
{
struct ib_uverbs_destroy_ah cmd;
struct ib_ah *ah;
struct ib_uobject *uobj;
int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
uobj = idr_write_uobj(&ib_uverbs_ah_idr, cmd.ah_handle, file->ucontext);
if (!uobj)
return -EINVAL;
ah = uobj->object;
ret = ib_destroy_ah(ah);
if (!ret)
uobj->live = 0;
put_uobj_write(uobj);
if (ret)
return ret;
idr_remove_uobj(&ib_uverbs_ah_idr, uobj);
mutex_lock(&file->mutex);
list_del(&uobj->list);
mutex_unlock(&file->mutex);
put_uobj(uobj);
return in_len;
}
ssize_t ib_uverbs_attach_mcast(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_attach_mcast cmd;
struct ib_qp *qp;
struct ib_uqp_object *obj;
struct ib_uverbs_mcast_entry *mcast;
int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
qp = idr_read_qp(cmd.qp_handle, file->ucontext);
if (!qp)
return -EINVAL;
obj = container_of(qp->uobject, struct ib_uqp_object, uevent.uobject);
list_for_each_entry(mcast, &obj->mcast_list, list)
if (cmd.mlid == mcast->lid &&
!memcmp(cmd.gid, mcast->gid.raw, sizeof mcast->gid.raw)) {
ret = 0;
goto out_put;
}
mcast = kmalloc(sizeof *mcast, GFP_KERNEL);
if (!mcast) {
ret = -ENOMEM;
goto out_put;
}
mcast->lid = cmd.mlid;
memcpy(mcast->gid.raw, cmd.gid, sizeof mcast->gid.raw);
ret = ib_attach_mcast(qp, &mcast->gid, cmd.mlid);
if (!ret)
list_add_tail(&mcast->list, &obj->mcast_list);
else
kfree(mcast);
out_put:
put_qp_read(qp);
return ret ? ret : in_len;
}
ssize_t ib_uverbs_detach_mcast(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_detach_mcast cmd;
struct ib_uqp_object *obj;
struct ib_qp *qp;
struct ib_uverbs_mcast_entry *mcast;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
qp = idr_read_qp(cmd.qp_handle, file->ucontext);
if (!qp)
return -EINVAL;
ret = ib_detach_mcast(qp, (union ib_gid *) cmd.gid, cmd.mlid);
if (ret)
goto out_put;
obj = container_of(qp->uobject, struct ib_uqp_object, uevent.uobject);
list_for_each_entry(mcast, &obj->mcast_list, list)
if (cmd.mlid == mcast->lid &&
!memcmp(cmd.gid, mcast->gid.raw, sizeof mcast->gid.raw)) {
list_del(&mcast->list);
kfree(mcast);
break;
}
out_put:
put_qp_read(qp);
return ret ? ret : in_len;
}
ssize_t ib_uverbs_create_srq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_create_srq cmd;
struct ib_uverbs_create_srq_resp resp;
struct ib_udata udata;
struct ib_uevent_object *obj;
struct ib_pd *pd;
struct ib_srq *srq;
struct ib_srq_init_attr attr;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
INIT_UDATA(&udata, buf + sizeof cmd,
(unsigned long) cmd.response + sizeof resp,
in_len - sizeof cmd, out_len - sizeof resp);
obj = kmalloc(sizeof *obj, GFP_KERNEL);
if (!obj)
return -ENOMEM;
init_uobj(&obj->uobject, cmd.user_handle, file->ucontext, &srq_lock_key);
down_write(&obj->uobject.mutex);
pd = idr_read_pd(cmd.pd_handle, file->ucontext);
if (!pd) {
ret = -EINVAL;
goto err;
}
attr.event_handler = ib_uverbs_srq_event_handler;
attr.srq_context = file;
attr.attr.max_wr = cmd.max_wr;
attr.attr.max_sge = cmd.max_sge;
attr.attr.srq_limit = cmd.srq_limit;
obj->events_reported = 0;
INIT_LIST_HEAD(&obj->event_list);
srq = pd->device->create_srq(pd, &attr, &udata);
if (IS_ERR(srq)) {
ret = PTR_ERR(srq);
goto err_put;
}
srq->device = pd->device;
srq->pd = pd;
srq->uobject = &obj->uobject;
srq->event_handler = attr.event_handler;
srq->srq_context = attr.srq_context;
atomic_inc(&pd->usecnt);
atomic_set(&srq->usecnt, 0);
obj->uobject.object = srq;
ret = idr_add_uobj(&ib_uverbs_srq_idr, &obj->uobject);
if (ret)
goto err_destroy;
memset(&resp, 0, sizeof resp);
resp.srq_handle = obj->uobject.id;
resp.max_wr = attr.attr.max_wr;
resp.max_sge = attr.attr.max_sge;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
ret = -EFAULT;
goto err_copy;
}
put_pd_read(pd);
mutex_lock(&file->mutex);
list_add_tail(&obj->uobject.list, &file->ucontext->srq_list);
mutex_unlock(&file->mutex);
obj->uobject.live = 1;
up_write(&obj->uobject.mutex);
return in_len;
err_copy:
idr_remove_uobj(&ib_uverbs_srq_idr, &obj->uobject);
err_destroy:
ib_destroy_srq(srq);
err_put:
put_pd_read(pd);
err:
put_uobj_write(&obj->uobject);
return ret;
}
ssize_t ib_uverbs_modify_srq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_modify_srq cmd;
struct ib_udata udata;
struct ib_srq *srq;
struct ib_srq_attr attr;
int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
INIT_UDATA(&udata, buf + sizeof cmd, NULL, in_len - sizeof cmd,
out_len);
srq = idr_read_srq(cmd.srq_handle, file->ucontext);
if (!srq)
return -EINVAL;
attr.max_wr = cmd.max_wr;
attr.srq_limit = cmd.srq_limit;
ret = srq->device->modify_srq(srq, &attr, cmd.attr_mask, &udata);
put_srq_read(srq);
return ret ? ret : in_len;
}
ssize_t ib_uverbs_query_srq(struct ib_uverbs_file *file,
const char __user *buf,
int in_len, int out_len)
{
struct ib_uverbs_query_srq cmd;
struct ib_uverbs_query_srq_resp resp;
struct ib_srq_attr attr;
struct ib_srq *srq;
int ret;
if (out_len < sizeof resp)
return -ENOSPC;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
srq = idr_read_srq(cmd.srq_handle, file->ucontext);
if (!srq)
return -EINVAL;
ret = ib_query_srq(srq, &attr);
put_srq_read(srq);
if (ret)
return ret;
memset(&resp, 0, sizeof resp);
resp.max_wr = attr.max_wr;
resp.max_sge = attr.max_sge;
resp.srq_limit = attr.srq_limit;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
return -EFAULT;
return in_len;
}
ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_destroy_srq cmd;
struct ib_uverbs_destroy_srq_resp resp;
struct ib_uobject *uobj;
struct ib_srq *srq;
struct ib_uevent_object *obj;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
uobj = idr_write_uobj(&ib_uverbs_srq_idr, cmd.srq_handle, file->ucontext);
if (!uobj)
return -EINVAL;
srq = uobj->object;
obj = container_of(uobj, struct ib_uevent_object, uobject);
ret = ib_destroy_srq(srq);
if (!ret)
uobj->live = 0;
put_uobj_write(uobj);
if (ret)
return ret;
idr_remove_uobj(&ib_uverbs_srq_idr, uobj);
mutex_lock(&file->mutex);
list_del(&uobj->list);
mutex_unlock(&file->mutex);
ib_uverbs_release_uevent(file, obj);
memset(&resp, 0, sizeof resp);
resp.events_reported = obj->events_reported;
put_uobj(uobj);
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp))
ret = -EFAULT;
return ret ? ret : in_len;
}