2018-07-24 13:04:02 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
//
|
|
|
|
// Copyright 2013 Freescale Semiconductor, Inc.
|
|
|
|
//
|
|
|
|
// Freescale DSPI driver
|
|
|
|
// This file contains a driver for the Freescale DSPI
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2014-09-29 02:57:06 +00:00
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/delay.h>
|
2016-11-10 12:19:15 +00:00
|
|
|
#include <linux/dmaengine.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
2014-09-29 02:57:06 +00:00
|
|
|
#include <linux/interrupt.h>
|
2013-08-16 03:08:55 +00:00
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
2014-09-29 02:57:06 +00:00
|
|
|
#include <linux/of_device.h>
|
2015-06-12 16:55:22 +00:00
|
|
|
#include <linux/pinctrl/consumer.h>
|
2014-02-12 07:29:05 +00:00
|
|
|
#include <linux/regmap.h>
|
2013-08-16 03:08:55 +00:00
|
|
|
#include <linux/spi/spi.h>
|
2017-10-27 22:23:01 +00:00
|
|
|
#include <linux/spi/spi-fsl-dspi.h>
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-08-18 18:01:02 +00:00
|
|
|
#define DRIVER_NAME "fsl-dspi"
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-08-18 18:01:02 +00:00
|
|
|
#define SPI_MCR 0x00
|
2019-08-18 18:01:04 +00:00
|
|
|
#define SPI_MCR_MASTER BIT(31)
|
2019-08-18 18:01:02 +00:00
|
|
|
#define SPI_MCR_PCSIS (0x3F << 16)
|
2019-08-18 18:01:04 +00:00
|
|
|
#define SPI_MCR_CLR_TXF BIT(11)
|
|
|
|
#define SPI_MCR_CLR_RXF BIT(10)
|
|
|
|
#define SPI_MCR_XSPI BIT(3)
|
2019-08-18 18:01:02 +00:00
|
|
|
|
|
|
|
#define SPI_TCR 0x08
|
2019-08-18 18:01:04 +00:00
|
|
|
#define SPI_TCR_GET_TCNT(x) (((x) & GENMASK(31, 16)) >> 16)
|
|
|
|
|
|
|
|
#define SPI_CTAR(x) (0x0c + (((x) & GENMASK(1, 0)) * 4))
|
|
|
|
#define SPI_CTAR_FMSZ(x) (((x) << 27) & GENMASK(30, 27))
|
2019-08-18 18:01:06 +00:00
|
|
|
#define SPI_CTAR_CPOL BIT(26)
|
|
|
|
#define SPI_CTAR_CPHA BIT(25)
|
|
|
|
#define SPI_CTAR_LSBFE BIT(24)
|
2019-08-18 18:01:04 +00:00
|
|
|
#define SPI_CTAR_PCSSCK(x) (((x) << 22) & GENMASK(23, 22))
|
|
|
|
#define SPI_CTAR_PASC(x) (((x) << 20) & GENMASK(21, 20))
|
|
|
|
#define SPI_CTAR_PDT(x) (((x) << 18) & GENMASK(19, 18))
|
|
|
|
#define SPI_CTAR_PBR(x) (((x) << 16) & GENMASK(17, 16))
|
|
|
|
#define SPI_CTAR_CSSCK(x) (((x) << 12) & GENMASK(15, 12))
|
|
|
|
#define SPI_CTAR_ASC(x) (((x) << 8) & GENMASK(11, 8))
|
|
|
|
#define SPI_CTAR_DT(x) (((x) << 4) & GENMASK(7, 4))
|
|
|
|
#define SPI_CTAR_BR(x) ((x) & GENMASK(3, 0))
|
2019-08-18 18:01:02 +00:00
|
|
|
#define SPI_CTAR_SCALE_BITS 0xf
|
|
|
|
|
|
|
|
#define SPI_CTAR0_SLAVE 0x0c
|
|
|
|
|
|
|
|
#define SPI_SR 0x2c
|
2019-08-18 18:01:04 +00:00
|
|
|
#define SPI_SR_TCFQF BIT(31)
|
|
|
|
#define SPI_SR_EOQF BIT(28)
|
2019-08-18 18:01:05 +00:00
|
|
|
#define SPI_SR_TFUF BIT(27)
|
|
|
|
#define SPI_SR_TFFF BIT(25)
|
|
|
|
#define SPI_SR_CMDTCF BIT(23)
|
|
|
|
#define SPI_SR_SPEF BIT(21)
|
|
|
|
#define SPI_SR_RFOF BIT(19)
|
|
|
|
#define SPI_SR_TFIWF BIT(18)
|
|
|
|
#define SPI_SR_RFDF BIT(17)
|
|
|
|
#define SPI_SR_CMDFFF BIT(16)
|
|
|
|
#define SPI_SR_CLEAR (SPI_SR_TCFQF | SPI_SR_EOQF | \
|
|
|
|
SPI_SR_TFUF | SPI_SR_TFFF | \
|
|
|
|
SPI_SR_CMDTCF | SPI_SR_SPEF | \
|
|
|
|
SPI_SR_RFOF | SPI_SR_TFIWF | \
|
|
|
|
SPI_SR_RFDF | SPI_SR_CMDFFF)
|
2019-08-18 18:01:02 +00:00
|
|
|
|
|
|
|
#define SPI_RSER_TFFFE BIT(25)
|
|
|
|
#define SPI_RSER_TFFFD BIT(24)
|
|
|
|
#define SPI_RSER_RFDFE BIT(17)
|
|
|
|
#define SPI_RSER_RFDFD BIT(16)
|
|
|
|
|
|
|
|
#define SPI_RSER 0x30
|
2019-08-18 18:01:04 +00:00
|
|
|
#define SPI_RSER_TCFQE BIT(31)
|
|
|
|
#define SPI_RSER_EOQFE BIT(28)
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
#define SPI_RSER_CMDTCFE BIT(23)
|
2019-08-18 18:01:02 +00:00
|
|
|
|
|
|
|
#define SPI_PUSHR 0x34
|
2019-08-18 18:01:04 +00:00
|
|
|
#define SPI_PUSHR_CMD_CONT BIT(15)
|
|
|
|
#define SPI_PUSHR_CMD_CTAS(x) (((x) << 12 & GENMASK(14, 12)))
|
|
|
|
#define SPI_PUSHR_CMD_EOQ BIT(11)
|
|
|
|
#define SPI_PUSHR_CMD_CTCNT BIT(10)
|
|
|
|
#define SPI_PUSHR_CMD_PCS(x) (BIT(x) & GENMASK(5, 0))
|
2019-08-18 18:01:02 +00:00
|
|
|
|
|
|
|
#define SPI_PUSHR_SLAVE 0x34
|
|
|
|
|
|
|
|
#define SPI_POPR 0x38
|
|
|
|
|
|
|
|
#define SPI_TXFR0 0x3c
|
|
|
|
#define SPI_TXFR1 0x40
|
|
|
|
#define SPI_TXFR2 0x44
|
|
|
|
#define SPI_TXFR3 0x48
|
|
|
|
#define SPI_RXFR0 0x7c
|
|
|
|
#define SPI_RXFR1 0x80
|
|
|
|
#define SPI_RXFR2 0x84
|
|
|
|
#define SPI_RXFR3 0x88
|
|
|
|
|
2019-08-18 18:01:04 +00:00
|
|
|
#define SPI_CTARE(x) (0x11c + (((x) & GENMASK(1, 0)) * 4))
|
2019-08-18 18:01:02 +00:00
|
|
|
#define SPI_CTARE_FMSZE(x) (((x) & 0x1) << 16)
|
|
|
|
#define SPI_CTARE_DTCP(x) ((x) & 0x7ff)
|
|
|
|
|
|
|
|
#define SPI_SREX 0x13c
|
|
|
|
|
|
|
|
#define SPI_FRAME_BITS(bits) SPI_CTAR_FMSZ((bits) - 1)
|
|
|
|
#define SPI_FRAME_EBITS(bits) SPI_CTARE_FMSZE(((bits) - 1) >> 4)
|
2018-06-20 07:34:39 +00:00
|
|
|
|
2018-06-20 07:34:38 +00:00
|
|
|
/* Register offsets for regmap_pushr */
|
2019-08-18 18:01:02 +00:00
|
|
|
#define PUSHR_CMD 0x0
|
|
|
|
#define PUSHR_TX 0x2
|
2018-06-20 07:34:38 +00:00
|
|
|
|
2019-08-18 18:01:02 +00:00
|
|
|
#define DMA_COMPLETION_TIMEOUT msecs_to_jiffies(3000)
|
2016-11-10 12:19:15 +00:00
|
|
|
|
2013-08-16 03:08:55 +00:00
|
|
|
struct chip_data {
|
2019-08-18 18:01:02 +00:00
|
|
|
u32 ctar_val;
|
2013-08-16 03:08:55 +00:00
|
|
|
};
|
|
|
|
|
2015-06-09 11:45:27 +00:00
|
|
|
enum dspi_trans_mode {
|
|
|
|
DSPI_EOQ_MODE = 0,
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
DSPI_XSPI_MODE,
|
2016-11-10 12:19:15 +00:00
|
|
|
DSPI_DMA_MODE,
|
2015-06-09 11:45:27 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct fsl_dspi_devtype_data {
|
2019-08-18 18:01:02 +00:00
|
|
|
enum dspi_trans_mode trans_mode;
|
|
|
|
u8 max_clock_factor;
|
2020-03-02 00:19:55 +00:00
|
|
|
int fifo_size;
|
|
|
|
int dma_bufsize;
|
2015-06-09 11:45:27 +00:00
|
|
|
};
|
|
|
|
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
enum {
|
|
|
|
LS1021A,
|
|
|
|
LS1012A,
|
|
|
|
LS1043A,
|
|
|
|
LS1046A,
|
|
|
|
LS2080A,
|
|
|
|
LS2085A,
|
|
|
|
LX2160A,
|
|
|
|
MCF5441X,
|
|
|
|
VF610,
|
2015-06-09 11:45:27 +00:00
|
|
|
};
|
|
|
|
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
static const struct fsl_dspi_devtype_data devtype_data[] = {
|
|
|
|
[VF610] = {
|
|
|
|
.trans_mode = DSPI_DMA_MODE,
|
|
|
|
.max_clock_factor = 2,
|
2020-03-02 00:19:55 +00:00
|
|
|
.dma_bufsize = 4096,
|
|
|
|
.fifo_size = 4,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
|
|
|
[LS1021A] = {
|
2020-03-02 00:19:58 +00:00
|
|
|
/* Has A-011218 DMA erratum */
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
.trans_mode = DSPI_XSPI_MODE,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
.max_clock_factor = 8,
|
2020-03-02 00:19:55 +00:00
|
|
|
.fifo_size = 4,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
|
|
|
[LS1012A] = {
|
2020-03-02 00:19:58 +00:00
|
|
|
/* Has A-011218 DMA erratum */
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
.trans_mode = DSPI_XSPI_MODE,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
.max_clock_factor = 8,
|
2020-03-02 00:19:55 +00:00
|
|
|
.fifo_size = 16,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
|
|
|
[LS1043A] = {
|
2020-03-02 00:19:58 +00:00
|
|
|
/* Has A-011218 DMA erratum */
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
.trans_mode = DSPI_XSPI_MODE,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
.max_clock_factor = 8,
|
2020-03-02 00:19:55 +00:00
|
|
|
.fifo_size = 16,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
|
|
|
[LS1046A] = {
|
2020-03-02 00:19:58 +00:00
|
|
|
/* Has A-011218 DMA erratum */
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
.trans_mode = DSPI_XSPI_MODE,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
.max_clock_factor = 8,
|
2020-03-02 00:19:55 +00:00
|
|
|
.fifo_size = 16,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
|
|
|
[LS2080A] = {
|
2020-03-02 00:19:58 +00:00
|
|
|
.trans_mode = DSPI_DMA_MODE,
|
|
|
|
.dma_bufsize = 8,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
.max_clock_factor = 8,
|
2020-03-02 00:19:55 +00:00
|
|
|
.fifo_size = 4,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
|
|
|
[LS2085A] = {
|
2020-03-02 00:19:58 +00:00
|
|
|
.trans_mode = DSPI_DMA_MODE,
|
|
|
|
.dma_bufsize = 8,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
.max_clock_factor = 8,
|
2020-03-02 00:19:55 +00:00
|
|
|
.fifo_size = 4,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
|
|
|
[LX2160A] = {
|
2020-03-02 00:19:58 +00:00
|
|
|
.trans_mode = DSPI_DMA_MODE,
|
|
|
|
.dma_bufsize = 8,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
.max_clock_factor = 8,
|
2020-03-02 00:19:55 +00:00
|
|
|
.fifo_size = 4,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
|
|
|
[MCF5441X] = {
|
|
|
|
.trans_mode = DSPI_EOQ_MODE,
|
|
|
|
.max_clock_factor = 8,
|
2020-03-02 00:19:55 +00:00
|
|
|
.fifo_size = 16,
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
},
|
2017-10-27 22:23:01 +00:00
|
|
|
};
|
|
|
|
|
2016-11-10 12:19:15 +00:00
|
|
|
struct fsl_dspi_dma {
|
2020-03-02 00:19:55 +00:00
|
|
|
/* Length of transfer in words of dspi->fifo_size */
|
2019-08-18 18:01:02 +00:00
|
|
|
u32 curr_xfer_len;
|
|
|
|
|
|
|
|
u32 *tx_dma_buf;
|
|
|
|
struct dma_chan *chan_tx;
|
|
|
|
dma_addr_t tx_dma_phys;
|
|
|
|
struct completion cmd_tx_complete;
|
|
|
|
struct dma_async_tx_descriptor *tx_desc;
|
|
|
|
|
|
|
|
u32 *rx_dma_buf;
|
|
|
|
struct dma_chan *chan_rx;
|
|
|
|
dma_addr_t rx_dma_phys;
|
|
|
|
struct completion cmd_rx_complete;
|
|
|
|
struct dma_async_tx_descriptor *rx_desc;
|
2016-11-10 12:19:15 +00:00
|
|
|
};
|
|
|
|
|
2013-08-16 03:08:55 +00:00
|
|
|
struct fsl_dspi {
|
2019-08-18 18:01:10 +00:00
|
|
|
struct spi_controller *ctlr;
|
2019-08-18 18:01:02 +00:00
|
|
|
struct platform_device *pdev;
|
|
|
|
|
|
|
|
struct regmap *regmap;
|
|
|
|
struct regmap *regmap_pushr;
|
|
|
|
int irq;
|
|
|
|
struct clk *clk;
|
|
|
|
|
|
|
|
struct spi_transfer *cur_transfer;
|
|
|
|
struct spi_message *cur_msg;
|
|
|
|
struct chip_data *cur_chip;
|
2019-12-27 01:24:17 +00:00
|
|
|
size_t progress;
|
2019-08-18 18:01:02 +00:00
|
|
|
size_t len;
|
|
|
|
const void *tx;
|
|
|
|
void *rx;
|
|
|
|
u16 tx_cmd;
|
|
|
|
const struct fsl_dspi_devtype_data *devtype_data;
|
|
|
|
|
|
|
|
wait_queue_head_t waitq;
|
|
|
|
u32 waitflags;
|
|
|
|
|
|
|
|
struct fsl_dspi_dma *dma;
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
|
2020-03-04 22:00:41 +00:00
|
|
|
int oper_word_size;
|
|
|
|
int oper_bits_per_word;
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
int words_in_flight;
|
2020-03-04 22:00:41 +00:00
|
|
|
|
|
|
|
void (*host_to_dev)(struct fsl_dspi *dspi, u32 *txdata);
|
|
|
|
void (*dev_to_host)(struct fsl_dspi *dspi, u32 rxdata);
|
2013-08-16 03:08:55 +00:00
|
|
|
};
|
|
|
|
|
2020-03-04 22:00:41 +00:00
|
|
|
static void dspi_native_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
|
|
|
|
{
|
|
|
|
memcpy(txdata, dspi->tx, dspi->oper_word_size);
|
|
|
|
dspi->tx += dspi->oper_word_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_native_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
|
|
|
|
{
|
|
|
|
memcpy(dspi->rx, &rxdata, dspi->oper_word_size);
|
|
|
|
dspi->rx += dspi->oper_word_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_8on32_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
|
|
|
|
{
|
|
|
|
*txdata = cpu_to_be32(*(u32 *)dspi->tx);
|
|
|
|
dspi->tx += sizeof(u32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_8on32_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
|
|
|
|
{
|
|
|
|
*(u32 *)dspi->rx = be32_to_cpu(rxdata);
|
|
|
|
dspi->rx += sizeof(u32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_8on16_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
|
|
|
|
{
|
|
|
|
*txdata = cpu_to_be16(*(u16 *)dspi->tx);
|
|
|
|
dspi->tx += sizeof(u16);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_8on16_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
|
|
|
|
{
|
|
|
|
*(u16 *)dspi->rx = be16_to_cpu(rxdata);
|
|
|
|
dspi->rx += sizeof(u16);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_16on32_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
|
|
|
|
{
|
|
|
|
u16 hi = *(u16 *)dspi->tx;
|
|
|
|
u16 lo = *(u16 *)(dspi->tx + 2);
|
|
|
|
|
|
|
|
*txdata = (u32)hi << 16 | lo;
|
|
|
|
dspi->tx += sizeof(u32);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_16on32_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
|
|
|
|
{
|
|
|
|
u16 hi = rxdata & 0xffff;
|
|
|
|
u16 lo = rxdata >> 16;
|
|
|
|
|
|
|
|
*(u16 *)dspi->rx = lo;
|
|
|
|
*(u16 *)(dspi->rx + 2) = hi;
|
|
|
|
dspi->rx += sizeof(u32);
|
|
|
|
}
|
|
|
|
|
2020-03-04 22:00:36 +00:00
|
|
|
/*
|
|
|
|
* Pop one word from the TX buffer for pushing into the
|
|
|
|
* PUSHR register (TX FIFO)
|
|
|
|
*/
|
2018-06-20 07:34:40 +00:00
|
|
|
static u32 dspi_pop_tx(struct fsl_dspi *dspi)
|
2018-06-20 07:34:35 +00:00
|
|
|
{
|
2018-06-20 07:34:40 +00:00
|
|
|
u32 txdata = 0;
|
2018-06-20 07:34:35 +00:00
|
|
|
|
2020-03-04 22:00:41 +00:00
|
|
|
if (dspi->tx)
|
|
|
|
dspi->host_to_dev(dspi, &txdata);
|
|
|
|
dspi->len -= dspi->oper_word_size;
|
2018-06-20 07:34:35 +00:00
|
|
|
return txdata;
|
|
|
|
}
|
2016-11-22 07:01:31 +00:00
|
|
|
|
2020-03-04 22:00:36 +00:00
|
|
|
/* Prepare one TX FIFO entry (txdata plus cmd) */
|
2018-06-20 07:34:35 +00:00
|
|
|
static u32 dspi_pop_tx_pushr(struct fsl_dspi *dspi)
|
2013-08-16 03:08:55 +00:00
|
|
|
{
|
2018-06-20 07:34:35 +00:00
|
|
|
u16 cmd = dspi->tx_cmd, data = dspi_pop_tx(dspi);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
if (spi_controller_is_slave(dspi->ctlr))
|
2019-02-05 22:13:49 +00:00
|
|
|
return data;
|
|
|
|
|
2018-06-20 07:34:35 +00:00
|
|
|
if (dspi->len > 0)
|
|
|
|
cmd |= SPI_PUSHR_CMD_CONT;
|
|
|
|
return cmd << 16 | data;
|
|
|
|
}
|
|
|
|
|
2020-03-04 22:00:36 +00:00
|
|
|
/* Push one word to the RX buffer from the POPR register (RX FIFO) */
|
2018-06-20 07:34:35 +00:00
|
|
|
static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata)
|
|
|
|
{
|
|
|
|
if (!dspi->rx)
|
|
|
|
return;
|
2020-03-04 22:00:41 +00:00
|
|
|
dspi->dev_to_host(dspi, rxdata);
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
2016-11-10 12:19:15 +00:00
|
|
|
static void dspi_tx_dma_callback(void *arg)
|
|
|
|
{
|
|
|
|
struct fsl_dspi *dspi = arg;
|
|
|
|
struct fsl_dspi_dma *dma = dspi->dma;
|
|
|
|
|
|
|
|
complete(&dma->cmd_tx_complete);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_rx_dma_callback(void *arg)
|
|
|
|
{
|
|
|
|
struct fsl_dspi *dspi = arg;
|
|
|
|
struct fsl_dspi_dma *dma = dspi->dma;
|
2016-11-22 07:01:30 +00:00
|
|
|
int i;
|
2016-11-10 12:19:15 +00:00
|
|
|
|
2018-06-20 07:34:32 +00:00
|
|
|
if (dspi->rx) {
|
2018-06-20 07:34:35 +00:00
|
|
|
for (i = 0; i < dma->curr_xfer_len; i++)
|
|
|
|
dspi_push_rx(dspi, dspi->dma->rx_dma_buf[i]);
|
2016-11-10 12:19:15 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
complete(&dma->cmd_rx_complete);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
|
|
|
|
{
|
|
|
|
struct device *dev = &dspi->pdev->dev;
|
2019-08-18 18:01:11 +00:00
|
|
|
struct fsl_dspi_dma *dma = dspi->dma;
|
2016-11-10 12:19:15 +00:00
|
|
|
int time_left;
|
2016-11-22 07:01:30 +00:00
|
|
|
int i;
|
2016-11-10 12:19:15 +00:00
|
|
|
|
2018-06-20 07:34:35 +00:00
|
|
|
for (i = 0; i < dma->curr_xfer_len; i++)
|
|
|
|
dspi->dma->tx_dma_buf[i] = dspi_pop_tx_pushr(dspi);
|
2016-11-10 12:19:15 +00:00
|
|
|
|
|
|
|
dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
|
|
|
|
dma->tx_dma_phys,
|
2016-11-22 07:01:30 +00:00
|
|
|
dma->curr_xfer_len *
|
|
|
|
DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
|
|
DMA_MEM_TO_DEV,
|
2016-11-10 12:19:15 +00:00
|
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
|
|
if (!dma->tx_desc) {
|
|
|
|
dev_err(dev, "Not able to get desc for DMA xfer\n");
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
dma->tx_desc->callback = dspi_tx_dma_callback;
|
|
|
|
dma->tx_desc->callback_param = dspi;
|
|
|
|
if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
|
|
|
|
dev_err(dev, "DMA submit failed\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
|
|
|
|
dma->rx_dma_phys,
|
2016-11-22 07:01:30 +00:00
|
|
|
dma->curr_xfer_len *
|
|
|
|
DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
|
|
DMA_DEV_TO_MEM,
|
2016-11-10 12:19:15 +00:00
|
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
|
|
if (!dma->rx_desc) {
|
|
|
|
dev_err(dev, "Not able to get desc for DMA xfer\n");
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
dma->rx_desc->callback = dspi_rx_dma_callback;
|
|
|
|
dma->rx_desc->callback_param = dspi;
|
|
|
|
if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
|
|
|
|
dev_err(dev, "DMA submit failed\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
reinit_completion(&dspi->dma->cmd_rx_complete);
|
|
|
|
reinit_completion(&dspi->dma->cmd_tx_complete);
|
|
|
|
|
|
|
|
dma_async_issue_pending(dma->chan_rx);
|
|
|
|
dma_async_issue_pending(dma->chan_tx);
|
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
if (spi_controller_is_slave(dspi->ctlr)) {
|
2019-02-05 22:13:49 +00:00
|
|
|
wait_for_completion_interruptible(&dspi->dma->cmd_rx_complete);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-11-10 12:19:15 +00:00
|
|
|
time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
|
2019-08-18 18:01:02 +00:00
|
|
|
DMA_COMPLETION_TIMEOUT);
|
2016-11-10 12:19:15 +00:00
|
|
|
if (time_left == 0) {
|
|
|
|
dev_err(dev, "DMA tx timeout\n");
|
|
|
|
dmaengine_terminate_all(dma->chan_tx);
|
|
|
|
dmaengine_terminate_all(dma->chan_rx);
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
|
|
|
|
time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
|
2019-08-18 18:01:02 +00:00
|
|
|
DMA_COMPLETION_TIMEOUT);
|
2016-11-10 12:19:15 +00:00
|
|
|
if (time_left == 0) {
|
|
|
|
dev_err(dev, "DMA rx timeout\n");
|
|
|
|
dmaengine_terminate_all(dma->chan_tx);
|
|
|
|
dmaengine_terminate_all(dma->chan_rx);
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dspi_dma_xfer(struct fsl_dspi *dspi)
|
|
|
|
{
|
2018-07-17 04:33:29 +00:00
|
|
|
struct spi_message *message = dspi->cur_msg;
|
2019-08-18 18:01:11 +00:00
|
|
|
struct device *dev = &dspi->pdev->dev;
|
|
|
|
struct fsl_dspi_dma *dma = dspi->dma;
|
2016-11-10 12:19:15 +00:00
|
|
|
int curr_remaining_bytes;
|
|
|
|
int bytes_per_buffer;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
curr_remaining_bytes = dspi->len;
|
2020-03-02 00:19:55 +00:00
|
|
|
bytes_per_buffer = dspi->devtype_data->dma_bufsize /
|
|
|
|
dspi->devtype_data->fifo_size;
|
2016-11-10 12:19:15 +00:00
|
|
|
while (curr_remaining_bytes) {
|
|
|
|
/* Check if current transfer fits the DMA buffer */
|
2020-03-04 22:00:41 +00:00
|
|
|
dma->curr_xfer_len = curr_remaining_bytes /
|
|
|
|
dspi->oper_word_size;
|
2016-11-22 07:01:30 +00:00
|
|
|
if (dma->curr_xfer_len > bytes_per_buffer)
|
2016-11-10 12:19:15 +00:00
|
|
|
dma->curr_xfer_len = bytes_per_buffer;
|
|
|
|
|
|
|
|
ret = dspi_next_xfer_dma_submit(dspi);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "DMA transfer failed\n");
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
} else {
|
2020-03-04 22:00:41 +00:00
|
|
|
const int len = dma->curr_xfer_len *
|
|
|
|
dspi->oper_word_size;
|
2018-07-17 04:33:29 +00:00
|
|
|
curr_remaining_bytes -= len;
|
|
|
|
message->actual_length += len;
|
2016-11-10 12:19:15 +00:00
|
|
|
if (curr_remaining_bytes < 0)
|
|
|
|
curr_remaining_bytes = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
exit:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
|
|
|
|
{
|
|
|
|
struct device *dev = &dspi->pdev->dev;
|
2019-08-18 18:01:11 +00:00
|
|
|
struct dma_slave_config cfg;
|
|
|
|
struct fsl_dspi_dma *dma;
|
2016-11-10 12:19:15 +00:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
|
|
|
|
if (!dma)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2019-12-12 13:55:48 +00:00
|
|
|
dma->chan_rx = dma_request_chan(dev, "rx");
|
|
|
|
if (IS_ERR(dma->chan_rx)) {
|
2016-11-10 12:19:15 +00:00
|
|
|
dev_err(dev, "rx dma channel not available\n");
|
2019-12-12 13:55:48 +00:00
|
|
|
ret = PTR_ERR(dma->chan_rx);
|
2016-11-10 12:19:15 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2019-12-12 13:55:48 +00:00
|
|
|
dma->chan_tx = dma_request_chan(dev, "tx");
|
|
|
|
if (IS_ERR(dma->chan_tx)) {
|
2016-11-10 12:19:15 +00:00
|
|
|
dev_err(dev, "tx dma channel not available\n");
|
2019-12-12 13:55:48 +00:00
|
|
|
ret = PTR_ERR(dma->chan_tx);
|
2016-11-10 12:19:15 +00:00
|
|
|
goto err_tx_channel;
|
|
|
|
}
|
|
|
|
|
2020-03-02 00:19:55 +00:00
|
|
|
dma->tx_dma_buf = dma_alloc_coherent(dev, dspi->devtype_data->dma_bufsize,
|
2019-08-18 18:01:02 +00:00
|
|
|
&dma->tx_dma_phys, GFP_KERNEL);
|
2016-11-10 12:19:15 +00:00
|
|
|
if (!dma->tx_dma_buf) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto err_tx_dma_buf;
|
|
|
|
}
|
|
|
|
|
2020-03-02 00:19:55 +00:00
|
|
|
dma->rx_dma_buf = dma_alloc_coherent(dev, dspi->devtype_data->dma_bufsize,
|
2019-08-18 18:01:02 +00:00
|
|
|
&dma->rx_dma_phys, GFP_KERNEL);
|
2016-11-10 12:19:15 +00:00
|
|
|
if (!dma->rx_dma_buf) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto err_rx_dma_buf;
|
|
|
|
}
|
|
|
|
|
|
|
|
cfg.src_addr = phy_addr + SPI_POPR;
|
|
|
|
cfg.dst_addr = phy_addr + SPI_PUSHR;
|
|
|
|
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
|
|
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
|
|
cfg.src_maxburst = 1;
|
|
|
|
cfg.dst_maxburst = 1;
|
|
|
|
|
|
|
|
cfg.direction = DMA_DEV_TO_MEM;
|
|
|
|
ret = dmaengine_slave_config(dma->chan_rx, &cfg);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "can't configure rx dma channel\n");
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto err_slave_config;
|
|
|
|
}
|
|
|
|
|
|
|
|
cfg.direction = DMA_MEM_TO_DEV;
|
|
|
|
ret = dmaengine_slave_config(dma->chan_tx, &cfg);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "can't configure tx dma channel\n");
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto err_slave_config;
|
|
|
|
}
|
|
|
|
|
|
|
|
dspi->dma = dma;
|
|
|
|
init_completion(&dma->cmd_tx_complete);
|
|
|
|
init_completion(&dma->cmd_rx_complete);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_slave_config:
|
2020-03-02 00:19:55 +00:00
|
|
|
dma_free_coherent(dev, dspi->devtype_data->dma_bufsize,
|
|
|
|
dma->rx_dma_buf, dma->rx_dma_phys);
|
2016-11-10 12:19:15 +00:00
|
|
|
err_rx_dma_buf:
|
2020-03-02 00:19:55 +00:00
|
|
|
dma_free_coherent(dev, dspi->devtype_data->dma_bufsize,
|
|
|
|
dma->tx_dma_buf, dma->tx_dma_phys);
|
2016-11-10 12:19:15 +00:00
|
|
|
err_tx_dma_buf:
|
|
|
|
dma_release_channel(dma->chan_tx);
|
|
|
|
err_tx_channel:
|
|
|
|
dma_release_channel(dma->chan_rx);
|
|
|
|
|
|
|
|
devm_kfree(dev, dma);
|
|
|
|
dspi->dma = NULL;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_release_dma(struct fsl_dspi *dspi)
|
|
|
|
{
|
|
|
|
struct fsl_dspi_dma *dma = dspi->dma;
|
|
|
|
struct device *dev = &dspi->pdev->dev;
|
|
|
|
|
2019-08-18 18:01:07 +00:00
|
|
|
if (!dma)
|
|
|
|
return;
|
2016-11-10 12:19:15 +00:00
|
|
|
|
2019-08-18 18:01:07 +00:00
|
|
|
if (dma->chan_tx) {
|
|
|
|
dma_unmap_single(dev, dma->tx_dma_phys,
|
2020-03-02 00:19:55 +00:00
|
|
|
dspi->devtype_data->dma_bufsize,
|
|
|
|
DMA_TO_DEVICE);
|
2019-08-18 18:01:07 +00:00
|
|
|
dma_release_channel(dma->chan_tx);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dma->chan_rx) {
|
|
|
|
dma_unmap_single(dev, dma->rx_dma_phys,
|
2020-03-02 00:19:55 +00:00
|
|
|
dspi->devtype_data->dma_bufsize,
|
|
|
|
DMA_FROM_DEVICE);
|
2019-08-18 18:01:07 +00:00
|
|
|
dma_release_channel(dma->chan_rx);
|
2016-11-10 12:19:15 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-08-16 03:08:55 +00:00
|
|
|
static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
|
2019-08-18 18:01:02 +00:00
|
|
|
unsigned long clkrate)
|
2013-08-16 03:08:55 +00:00
|
|
|
{
|
|
|
|
/* Valid baud rate pre-scaler values */
|
|
|
|
int pbr_tbl[4] = {2, 3, 5, 7};
|
|
|
|
int brs[16] = { 2, 4, 6, 8,
|
2019-08-18 18:01:02 +00:00
|
|
|
16, 32, 64, 128,
|
|
|
|
256, 512, 1024, 2048,
|
|
|
|
4096, 8192, 16384, 32768 };
|
spi: fsl-dspi: Fix clock rate scale values
Previous algorithm had an outer loop with the values {2,3,5,7} and an
inner loop with {2,4,6,8,16,32,...,32768}, and would pick the first
value over the required scaling value (where the total scale was the two
numbers multiplied).
Since the inner loop went up to 32768 it would always pick a value of 2
for PBR and a much higher than necessary value for BR. The desired
scale factor was being divided by two I believe to compensate for the
much higher scale factors (the divide by two not specified in the
reference manual).
Updated to check all values and find the smallest scale factor possible
without going over the desired clock rate.
Signed-off-by: Aaron Brice <aaron.brice@datasoft.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-30 17:49:15 +00:00
|
|
|
int scale_needed, scale, minscale = INT_MAX;
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
scale_needed = clkrate / speed_hz;
|
spi: fsl-dspi: Fix clock rate scale values
Previous algorithm had an outer loop with the values {2,3,5,7} and an
inner loop with {2,4,6,8,16,32,...,32768}, and would pick the first
value over the required scaling value (where the total scale was the two
numbers multiplied).
Since the inner loop went up to 32768 it would always pick a value of 2
for PBR and a much higher than necessary value for BR. The desired
scale factor was being divided by two I believe to compensate for the
much higher scale factors (the divide by two not specified in the
reference manual).
Updated to check all values and find the smallest scale factor possible
without going over the desired clock rate.
Signed-off-by: Aaron Brice <aaron.brice@datasoft.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-03 20:39:29 +00:00
|
|
|
if (clkrate % speed_hz)
|
|
|
|
scale_needed++;
|
spi: fsl-dspi: Fix clock rate scale values
Previous algorithm had an outer loop with the values {2,3,5,7} and an
inner loop with {2,4,6,8,16,32,...,32768}, and would pick the first
value over the required scaling value (where the total scale was the two
numbers multiplied).
Since the inner loop went up to 32768 it would always pick a value of 2
for PBR and a much higher than necessary value for BR. The desired
scale factor was being divided by two I believe to compensate for the
much higher scale factors (the divide by two not specified in the
reference manual).
Updated to check all values and find the smallest scale factor possible
without going over the desired clock rate.
Signed-off-by: Aaron Brice <aaron.brice@datasoft.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-30 17:49:15 +00:00
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(brs); i++)
|
|
|
|
for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) {
|
|
|
|
scale = brs[i] * pbr_tbl[j];
|
|
|
|
if (scale >= scale_needed) {
|
|
|
|
if (scale < minscale) {
|
|
|
|
minscale = scale;
|
|
|
|
*br = i;
|
|
|
|
*pbr = j;
|
|
|
|
}
|
|
|
|
break;
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
spi: fsl-dspi: Fix clock rate scale values
Previous algorithm had an outer loop with the values {2,3,5,7} and an
inner loop with {2,4,6,8,16,32,...,32768}, and would pick the first
value over the required scaling value (where the total scale was the two
numbers multiplied).
Since the inner loop went up to 32768 it would always pick a value of 2
for PBR and a much higher than necessary value for BR. The desired
scale factor was being divided by two I believe to compensate for the
much higher scale factors (the divide by two not specified in the
reference manual).
Updated to check all values and find the smallest scale factor possible
without going over the desired clock rate.
Signed-off-by: Aaron Brice <aaron.brice@datasoft.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-30 17:49:15 +00:00
|
|
|
if (minscale == INT_MAX) {
|
|
|
|
pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n",
|
|
|
|
speed_hz, clkrate);
|
|
|
|
*pbr = ARRAY_SIZE(pbr_tbl) - 1;
|
|
|
|
*br = ARRAY_SIZE(brs) - 1;
|
|
|
|
}
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
2015-04-03 20:39:31 +00:00
|
|
|
static void ns_delay_scale(char *psc, char *sc, int delay_ns,
|
2019-08-18 18:01:02 +00:00
|
|
|
unsigned long clkrate)
|
2015-04-03 20:39:31 +00:00
|
|
|
{
|
|
|
|
int scale_needed, scale, minscale = INT_MAX;
|
2019-08-18 18:01:11 +00:00
|
|
|
int pscale_tbl[4] = {1, 3, 5, 7};
|
2015-04-03 20:39:31 +00:00
|
|
|
u32 remainder;
|
2019-08-18 18:01:11 +00:00
|
|
|
int i, j;
|
2015-04-03 20:39:31 +00:00
|
|
|
|
|
|
|
scale_needed = div_u64_rem((u64)delay_ns * clkrate, NSEC_PER_SEC,
|
2019-08-18 18:01:02 +00:00
|
|
|
&remainder);
|
2015-04-03 20:39:31 +00:00
|
|
|
if (remainder)
|
|
|
|
scale_needed++;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pscale_tbl); i++)
|
|
|
|
for (j = 0; j <= SPI_CTAR_SCALE_BITS; j++) {
|
|
|
|
scale = pscale_tbl[i] * (2 << j);
|
|
|
|
if (scale >= scale_needed) {
|
|
|
|
if (scale < minscale) {
|
|
|
|
minscale = scale;
|
|
|
|
*psc = i;
|
|
|
|
*sc = j;
|
|
|
|
}
|
|
|
|
break;
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-04-03 20:39:31 +00:00
|
|
|
if (minscale == INT_MAX) {
|
|
|
|
pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value",
|
|
|
|
delay_ns, clkrate);
|
|
|
|
*psc = ARRAY_SIZE(pscale_tbl) - 1;
|
|
|
|
*sc = SPI_CTAR_SCALE_BITS;
|
|
|
|
}
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
2020-03-04 22:00:37 +00:00
|
|
|
static void dspi_pushr_write(struct fsl_dspi *dspi)
|
2013-08-16 03:08:55 +00:00
|
|
|
{
|
2018-06-20 07:34:35 +00:00
|
|
|
regmap_write(dspi->regmap, SPI_PUSHR, dspi_pop_tx_pushr(dspi));
|
2015-06-09 11:45:27 +00:00
|
|
|
}
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2020-03-04 22:00:37 +00:00
|
|
|
static void dspi_pushr_cmd_write(struct fsl_dspi *dspi)
|
2018-06-20 07:34:40 +00:00
|
|
|
{
|
|
|
|
u16 cmd = dspi->tx_cmd;
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
/*
|
|
|
|
* The only time when the PCS doesn't need continuation after this word
|
|
|
|
* is when it's last. We need to look ahead, because we actually call
|
|
|
|
* dspi_pop_tx (the function that decrements dspi->len) _after_
|
|
|
|
* dspi_pushr_cmd_write with XSPI mode. As for how much in advance? One
|
|
|
|
* word is enough. If there's more to transmit than that,
|
|
|
|
* dspi_xspi_write will know to split the FIFO writes in 2, and
|
|
|
|
* generate a new PUSHR command with the final word that will have PCS
|
|
|
|
* deasserted (not continued) here.
|
|
|
|
*/
|
2020-03-04 22:00:41 +00:00
|
|
|
if (dspi->len > dspi->oper_word_size)
|
2018-06-20 07:34:40 +00:00
|
|
|
cmd |= SPI_PUSHR_CMD_CONT;
|
|
|
|
regmap_write(dspi->regmap_pushr, PUSHR_CMD, cmd);
|
|
|
|
}
|
|
|
|
|
2020-03-04 22:00:37 +00:00
|
|
|
static void dspi_pushr_txdata_write(struct fsl_dspi *dspi, u16 txdata)
|
2018-06-20 07:34:40 +00:00
|
|
|
{
|
|
|
|
regmap_write(dspi->regmap_pushr, PUSHR_TX, txdata);
|
|
|
|
}
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
static void dspi_xspi_write(struct fsl_dspi *dspi, int cnt)
|
2015-06-09 11:45:27 +00:00
|
|
|
{
|
2020-03-04 22:00:41 +00:00
|
|
|
/* Update CTARE */
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
regmap_write(dspi->regmap, SPI_CTARE(0),
|
2020-03-04 22:00:41 +00:00
|
|
|
SPI_FRAME_EBITS(dspi->oper_bits_per_word) |
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
SPI_CTARE_DTCP(cnt));
|
2018-06-20 07:34:40 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
/*
|
|
|
|
* Write the CMD FIFO entry first, and then the two
|
|
|
|
* corresponding TX FIFO entries (or one...).
|
|
|
|
*/
|
|
|
|
dspi_pushr_cmd_write(dspi);
|
|
|
|
|
|
|
|
/* Fill TX FIFO with as many transfers as possible */
|
|
|
|
while (cnt--) {
|
2018-06-20 07:34:40 +00:00
|
|
|
u32 data = dspi_pop_tx(dspi);
|
|
|
|
|
2020-03-04 22:00:37 +00:00
|
|
|
dspi_pushr_txdata_write(dspi, data & 0xFFFF);
|
2020-03-04 22:00:41 +00:00
|
|
|
if (dspi->oper_bits_per_word > 16)
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
dspi_pushr_txdata_write(dspi, data >> 16);
|
2018-06-20 07:34:40 +00:00
|
|
|
}
|
2015-06-09 11:45:27 +00:00
|
|
|
}
|
2013-08-16 03:08:55 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
static void dspi_xspi_fifo_write(struct fsl_dspi *dspi)
|
2015-06-09 11:45:27 +00:00
|
|
|
{
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
int num_fifo_entries = dspi->devtype_data->fifo_size;
|
|
|
|
int bytes_in_flight;
|
2015-06-09 11:45:27 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
/* In XSPI mode each 32-bit word occupies 2 TX FIFO entries */
|
2020-03-04 22:00:41 +00:00
|
|
|
if (dspi->oper_word_size == 4)
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
num_fifo_entries /= 2;
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2020-03-04 22:00:41 +00:00
|
|
|
/*
|
|
|
|
* Integer division intentionally trims off odd (or non-multiple of 4)
|
|
|
|
* numbers of bytes at the end of the buffer, which will be sent next
|
|
|
|
* time using a smaller oper_word_size.
|
|
|
|
*/
|
|
|
|
dspi->words_in_flight = dspi->len / dspi->oper_word_size;
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
|
|
|
|
if (dspi->words_in_flight > num_fifo_entries)
|
|
|
|
dspi->words_in_flight = num_fifo_entries;
|
|
|
|
|
2020-03-04 22:00:41 +00:00
|
|
|
bytes_in_flight = dspi->words_in_flight * dspi->oper_word_size;
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If the PCS needs to de-assert (i.e. we're at the end of the buffer
|
|
|
|
* and cs_change does not want the PCS to stay on), then we need a new
|
|
|
|
* PUSHR command, since this one (for the body of the buffer)
|
|
|
|
* necessarily has the CONT bit set.
|
|
|
|
* So send one word less during this go, to force a split and a command
|
|
|
|
* with a single word next time, when CONT will be unset.
|
|
|
|
*/
|
|
|
|
if (bytes_in_flight == dspi->len && dspi->words_in_flight > 1 &&
|
|
|
|
!(dspi->tx_cmd & SPI_PUSHR_CMD_CONT))
|
|
|
|
dspi->words_in_flight--;
|
|
|
|
|
|
|
|
dspi_xspi_write(dspi, dspi->words_in_flight);
|
2015-06-09 11:45:27 +00:00
|
|
|
}
|
2013-08-16 03:08:55 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
static void dspi_eoq_fifo_write(struct fsl_dspi *dspi)
|
2015-06-09 11:45:27 +00:00
|
|
|
{
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
int num_fifo_entries = dspi->devtype_data->fifo_size;
|
2018-08-17 23:51:58 +00:00
|
|
|
u16 xfer_cmd = dspi->tx_cmd;
|
2018-06-20 07:34:35 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
dspi->words_in_flight = num_fifo_entries;
|
|
|
|
|
2018-06-20 07:34:35 +00:00
|
|
|
/* Fill TX FIFO with as many transfers as possible */
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
while (dspi->len && num_fifo_entries--) {
|
2018-08-17 23:51:58 +00:00
|
|
|
dspi->tx_cmd = xfer_cmd;
|
2018-06-20 07:34:35 +00:00
|
|
|
/* Request EOQF for last transfer in FIFO */
|
2020-03-04 22:00:41 +00:00
|
|
|
if (dspi->len == dspi->oper_word_size || num_fifo_entries == 0)
|
2018-06-20 07:34:35 +00:00
|
|
|
dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;
|
|
|
|
/* Write combined TX FIFO and CMD FIFO entry */
|
2020-03-04 22:00:37 +00:00
|
|
|
dspi_pushr_write(dspi);
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
2015-06-09 11:45:27 +00:00
|
|
|
}
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
static u32 dspi_popr_read(struct fsl_dspi *dspi)
|
2015-06-09 11:45:27 +00:00
|
|
|
{
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
u32 rxdata = 0;
|
2015-06-09 11:45:27 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
regmap_read(dspi->regmap, SPI_POPR, &rxdata);
|
|
|
|
return rxdata;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dspi_fifo_read(struct fsl_dspi *dspi)
|
|
|
|
{
|
2019-08-18 18:01:12 +00:00
|
|
|
/* Read one FIFO entry and push to rx buffer */
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
while (dspi->words_in_flight--)
|
2020-03-04 22:00:37 +00:00
|
|
|
dspi_push_rx(dspi, dspi_popr_read(dspi));
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
2020-03-04 22:00:41 +00:00
|
|
|
static void dspi_setup_accel(struct fsl_dspi *dspi)
|
|
|
|
{
|
|
|
|
struct spi_transfer *xfer = dspi->cur_transfer;
|
|
|
|
|
|
|
|
/* Start off with maximum supported by hardware */
|
|
|
|
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
|
|
|
|
dspi->oper_bits_per_word = 32;
|
|
|
|
else
|
|
|
|
dspi->oper_bits_per_word = 16;
|
|
|
|
|
|
|
|
/* And go down only if the buffer can't be sent with words this big */
|
|
|
|
do {
|
|
|
|
if (dspi->len >= DIV_ROUND_UP(dspi->oper_bits_per_word, 8))
|
|
|
|
break;
|
|
|
|
|
|
|
|
dspi->oper_bits_per_word /= 2;
|
|
|
|
} while (dspi->oper_bits_per_word > 8);
|
|
|
|
|
|
|
|
if (xfer->bits_per_word == 8 && dspi->oper_bits_per_word == 32) {
|
|
|
|
dspi->dev_to_host = dspi_8on32_dev_to_host;
|
|
|
|
dspi->host_to_dev = dspi_8on32_host_to_dev;
|
|
|
|
} else if (xfer->bits_per_word == 8 && dspi->oper_bits_per_word == 16) {
|
|
|
|
dspi->dev_to_host = dspi_8on16_dev_to_host;
|
|
|
|
dspi->host_to_dev = dspi_8on16_host_to_dev;
|
|
|
|
} else if (xfer->bits_per_word == 16 && dspi->oper_bits_per_word == 32) {
|
|
|
|
dspi->dev_to_host = dspi_16on32_dev_to_host;
|
|
|
|
dspi->host_to_dev = dspi_16on32_host_to_dev;
|
|
|
|
} else {
|
|
|
|
/* No acceleration needed (8<N<=16 on 16, 16<N<=32 on 32) */
|
|
|
|
dspi->dev_to_host = dspi_native_dev_to_host;
|
|
|
|
dspi->host_to_dev = dspi_native_host_to_dev;
|
|
|
|
dspi->oper_bits_per_word = xfer->bits_per_word;
|
|
|
|
}
|
|
|
|
|
|
|
|
dspi->oper_word_size = DIV_ROUND_UP(dspi->oper_bits_per_word, 8);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Update CTAR here (code is common for both EOQ and XSPI modes).
|
|
|
|
* We will update CTARE in the portion specific to XSPI, when we
|
|
|
|
* also know the preload value (DTCP).
|
|
|
|
*/
|
|
|
|
regmap_write(dspi->regmap, SPI_CTAR(0),
|
|
|
|
dspi->cur_chip->ctar_val |
|
|
|
|
SPI_FRAME_BITS(dspi->oper_bits_per_word));
|
|
|
|
}
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
static void dspi_fifo_write(struct fsl_dspi *dspi)
|
|
|
|
{
|
2020-03-04 22:00:41 +00:00
|
|
|
dspi_setup_accel(dspi);
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE)
|
|
|
|
dspi_eoq_fifo_write(dspi);
|
|
|
|
else
|
|
|
|
dspi_xspi_fifo_write(dspi);
|
|
|
|
}
|
|
|
|
|
2019-08-22 21:15:13 +00:00
|
|
|
static int dspi_rxtx(struct fsl_dspi *dspi)
|
2019-08-18 18:01:13 +00:00
|
|
|
{
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
struct spi_transfer *xfer = dspi->cur_transfer;
|
2019-08-18 18:01:13 +00:00
|
|
|
struct spi_message *msg = dspi->cur_msg;
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
int bytes_sent;
|
|
|
|
|
|
|
|
/* Update total number of bytes that were transferred */
|
2020-03-04 22:00:41 +00:00
|
|
|
bytes_sent = dspi->words_in_flight * dspi->oper_word_size;
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
msg->actual_length += bytes_sent;
|
|
|
|
dspi->progress += bytes_sent / DIV_ROUND_UP(xfer->bits_per_word, 8);
|
2019-08-22 21:15:10 +00:00
|
|
|
|
2019-09-05 01:01:13 +00:00
|
|
|
spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer,
|
2019-12-27 01:24:17 +00:00
|
|
|
dspi->progress, !dspi->irq);
|
2019-09-05 01:01:13 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
dspi_fifo_read(dspi);
|
2019-08-18 18:01:13 +00:00
|
|
|
|
2019-08-22 21:15:13 +00:00
|
|
|
if (!dspi->len)
|
|
|
|
/* Success! */
|
|
|
|
return 0;
|
2019-08-18 18:01:13 +00:00
|
|
|
|
2019-09-05 01:01:13 +00:00
|
|
|
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
|
2019-12-27 01:24:17 +00:00
|
|
|
dspi->progress, !dspi->irq);
|
2019-09-05 01:01:13 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
dspi_fifo_write(dspi);
|
2019-08-18 18:01:13 +00:00
|
|
|
|
2019-08-22 21:15:13 +00:00
|
|
|
return -EINPROGRESS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dspi_poll(struct fsl_dspi *dspi)
|
|
|
|
{
|
|
|
|
int tries = 1000;
|
|
|
|
u32 spi_sr;
|
|
|
|
|
|
|
|
do {
|
|
|
|
regmap_read(dspi->regmap, SPI_SR, &spi_sr);
|
|
|
|
regmap_write(dspi->regmap, SPI_SR, spi_sr);
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
if (spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF))
|
2019-08-22 21:15:13 +00:00
|
|
|
break;
|
|
|
|
} while (--tries);
|
|
|
|
|
|
|
|
if (!tries)
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
|
|
|
|
return dspi_rxtx(dspi);
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t dspi_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
|
|
|
|
u32 spi_sr;
|
|
|
|
|
|
|
|
regmap_read(dspi->regmap, SPI_SR, &spi_sr);
|
|
|
|
regmap_write(dspi->regmap, SPI_SR, spi_sr);
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF)))
|
2019-08-22 21:15:13 +00:00
|
|
|
return IRQ_NONE;
|
|
|
|
|
2019-09-03 10:57:08 +00:00
|
|
|
if (dspi_rxtx(dspi) == 0) {
|
2019-08-22 21:15:13 +00:00
|
|
|
dspi->waitflags = 1;
|
|
|
|
wake_up_interruptible(&dspi->waitq);
|
|
|
|
}
|
|
|
|
|
2019-08-18 18:01:13 +00:00
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
static int dspi_transfer_one_message(struct spi_controller *ctlr,
|
2019-08-18 18:01:02 +00:00
|
|
|
struct spi_message *message)
|
2013-08-16 03:08:55 +00:00
|
|
|
{
|
2019-08-18 18:01:10 +00:00
|
|
|
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
|
2015-01-27 10:57:22 +00:00
|
|
|
struct spi_device *spi = message->spi;
|
2019-08-18 18:01:11 +00:00
|
|
|
enum dspi_trans_mode trans_mode;
|
2015-01-27 10:57:22 +00:00
|
|
|
struct spi_transfer *transfer;
|
|
|
|
int status = 0;
|
2015-06-09 11:45:27 +00:00
|
|
|
|
2015-01-27 10:57:22 +00:00
|
|
|
message->actual_length = 0;
|
|
|
|
|
|
|
|
list_for_each_entry(transfer, &message->transfers, transfer_list) {
|
|
|
|
dspi->cur_transfer = transfer;
|
|
|
|
dspi->cur_msg = message;
|
|
|
|
dspi->cur_chip = spi_get_ctldata(spi);
|
2018-06-20 07:34:33 +00:00
|
|
|
/* Prepare command word for CMD FIFO */
|
|
|
|
dspi->tx_cmd = SPI_PUSHR_CMD_CTAS(0) |
|
2019-08-18 18:01:02 +00:00
|
|
|
SPI_PUSHR_CMD_PCS(spi->chip_select);
|
2016-04-05 12:33:14 +00:00
|
|
|
if (list_is_last(&dspi->cur_transfer->transfer_list,
|
2018-06-20 07:34:33 +00:00
|
|
|
&dspi->cur_msg->transfers)) {
|
|
|
|
/* Leave PCS activated after last transfer when
|
|
|
|
* cs_change is set.
|
|
|
|
*/
|
|
|
|
if (transfer->cs_change)
|
|
|
|
dspi->tx_cmd |= SPI_PUSHR_CMD_CONT;
|
|
|
|
} else {
|
|
|
|
/* Keep PCS active between transfers in same message
|
|
|
|
* when cs_change is not set, and de-activate PCS
|
|
|
|
* between transfers in the same message when
|
|
|
|
* cs_change is set.
|
|
|
|
*/
|
|
|
|
if (!transfer->cs_change)
|
|
|
|
dspi->tx_cmd |= SPI_PUSHR_CMD_CONT;
|
|
|
|
}
|
|
|
|
|
2018-06-20 07:34:35 +00:00
|
|
|
dspi->tx = transfer->tx_buf;
|
2015-01-27 10:57:22 +00:00
|
|
|
dspi->rx = transfer->rx_buf;
|
|
|
|
dspi->len = transfer->len;
|
2019-12-27 01:24:17 +00:00
|
|
|
dspi->progress = 0;
|
2015-01-27 10:57:22 +00:00
|
|
|
|
|
|
|
regmap_update_bits(dspi->regmap, SPI_MCR,
|
2018-06-20 07:34:37 +00:00
|
|
|
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
|
|
|
|
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
|
2020-03-04 22:00:41 +00:00
|
|
|
/*
|
|
|
|
* Static CTAR setup for modes that don't dynamically adjust it
|
|
|
|
* via dspi_setup_accel (aka for DMA)
|
|
|
|
*/
|
2015-12-10 05:55:30 +00:00
|
|
|
regmap_write(dspi->regmap, SPI_CTAR(0),
|
2018-06-20 07:34:35 +00:00
|
|
|
dspi->cur_chip->ctar_val |
|
|
|
|
SPI_FRAME_BITS(transfer->bits_per_word));
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-09-05 01:01:13 +00:00
|
|
|
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
|
2019-12-27 01:24:17 +00:00
|
|
|
dspi->progress, !dspi->irq);
|
2019-09-05 01:01:13 +00:00
|
|
|
|
2015-06-09 11:45:27 +00:00
|
|
|
trans_mode = dspi->devtype_data->trans_mode;
|
|
|
|
switch (trans_mode) {
|
|
|
|
case DSPI_EOQ_MODE:
|
|
|
|
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
dspi_fifo_write(dspi);
|
2015-06-09 11:45:27 +00:00
|
|
|
break;
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
case DSPI_XSPI_MODE:
|
|
|
|
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE);
|
|
|
|
dspi_fifo_write(dspi);
|
2015-06-09 11:45:27 +00:00
|
|
|
break;
|
2016-11-10 12:19:15 +00:00
|
|
|
case DSPI_DMA_MODE:
|
|
|
|
regmap_write(dspi->regmap, SPI_RSER,
|
2019-08-18 18:01:02 +00:00
|
|
|
SPI_RSER_TFFFE | SPI_RSER_TFFFD |
|
|
|
|
SPI_RSER_RFDFE | SPI_RSER_RFDFD);
|
2016-11-10 12:19:15 +00:00
|
|
|
status = dspi_dma_xfer(dspi);
|
2016-11-17 12:16:48 +00:00
|
|
|
break;
|
2015-06-09 11:45:27 +00:00
|
|
|
default:
|
|
|
|
dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
|
|
|
|
trans_mode);
|
|
|
|
status = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
2014-02-12 07:29:05 +00:00
|
|
|
|
2019-08-22 21:15:13 +00:00
|
|
|
if (!dspi->irq) {
|
|
|
|
do {
|
|
|
|
status = dspi_poll(dspi);
|
|
|
|
} while (status == -EINPROGRESS);
|
|
|
|
} else if (trans_mode != DSPI_DMA_MODE) {
|
|
|
|
status = wait_event_interruptible(dspi->waitq,
|
|
|
|
dspi->waitflags);
|
2016-11-17 12:16:48 +00:00
|
|
|
dspi->waitflags = 0;
|
|
|
|
}
|
2019-08-22 21:15:13 +00:00
|
|
|
if (status)
|
|
|
|
dev_err(&dspi->pdev->dev,
|
|
|
|
"Waiting for transfer to complete failed!\n");
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-09-26 10:51:37 +00:00
|
|
|
spi_transfer_delay_exec(transfer);
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
2015-06-09 11:45:27 +00:00
|
|
|
out:
|
2015-01-27 10:57:22 +00:00
|
|
|
message->status = status;
|
2019-08-18 18:01:10 +00:00
|
|
|
spi_finalize_current_message(ctlr);
|
2015-01-27 10:57:22 +00:00
|
|
|
|
|
|
|
return status;
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
2015-01-27 10:57:22 +00:00
|
|
|
static int dspi_setup(struct spi_device *spi)
|
2013-08-16 03:08:55 +00:00
|
|
|
{
|
2019-08-18 18:01:10 +00:00
|
|
|
struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller);
|
2015-04-03 20:39:31 +00:00
|
|
|
unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0;
|
2019-08-18 18:01:11 +00:00
|
|
|
u32 cs_sck_delay = 0, sck_cs_delay = 0;
|
|
|
|
struct fsl_dspi_platform_data *pdata;
|
2018-06-20 07:34:35 +00:00
|
|
|
unsigned char pasc = 0, asc = 0;
|
2019-08-18 18:01:11 +00:00
|
|
|
struct chip_data *chip;
|
2015-04-03 20:39:31 +00:00
|
|
|
unsigned long clkrate;
|
2013-08-16 03:08:55 +00:00
|
|
|
|
|
|
|
/* Only alloc on first setup */
|
|
|
|
chip = spi_get_ctldata(spi);
|
|
|
|
if (chip == NULL) {
|
2015-01-27 10:57:20 +00:00
|
|
|
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
|
2013-08-16 03:08:55 +00:00
|
|
|
if (!chip)
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2017-10-27 22:23:01 +00:00
|
|
|
pdata = dev_get_platdata(&dspi->pdev->dev);
|
2015-04-03 20:39:31 +00:00
|
|
|
|
2017-10-27 22:23:01 +00:00
|
|
|
if (!pdata) {
|
|
|
|
of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay",
|
2019-08-18 18:01:02 +00:00
|
|
|
&cs_sck_delay);
|
2017-10-27 22:23:01 +00:00
|
|
|
|
|
|
|
of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay",
|
2019-08-18 18:01:02 +00:00
|
|
|
&sck_cs_delay);
|
2017-10-27 22:23:01 +00:00
|
|
|
} else {
|
|
|
|
cs_sck_delay = pdata->cs_sck_delay;
|
|
|
|
sck_cs_delay = pdata->sck_cs_delay;
|
|
|
|
}
|
2015-04-03 20:39:31 +00:00
|
|
|
|
|
|
|
clkrate = clk_get_rate(dspi->clk);
|
|
|
|
hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate);
|
|
|
|
|
|
|
|
/* Set PCS to SCK delay scale values */
|
|
|
|
ns_delay_scale(&pcssck, &cssck, cs_sck_delay, clkrate);
|
|
|
|
|
|
|
|
/* Set After SCK delay scale values */
|
|
|
|
ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-08-18 18:01:06 +00:00
|
|
|
chip->ctar_val = 0;
|
|
|
|
if (spi->mode & SPI_CPOL)
|
|
|
|
chip->ctar_val |= SPI_CTAR_CPOL;
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
|
|
chip->ctar_val |= SPI_CTAR_CPHA;
|
2019-02-05 22:13:49 +00:00
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
if (!spi_controller_is_slave(dspi->ctlr)) {
|
2019-08-18 18:01:06 +00:00
|
|
|
chip->ctar_val |= SPI_CTAR_PCSSCK(pcssck) |
|
|
|
|
SPI_CTAR_CSSCK(cssck) |
|
|
|
|
SPI_CTAR_PASC(pasc) |
|
|
|
|
SPI_CTAR_ASC(asc) |
|
|
|
|
SPI_CTAR_PBR(pbr) |
|
|
|
|
SPI_CTAR_BR(br);
|
|
|
|
|
|
|
|
if (spi->mode & SPI_LSB_FIRST)
|
|
|
|
chip->ctar_val |= SPI_CTAR_LSBFE;
|
2019-02-05 22:13:49 +00:00
|
|
|
}
|
2013-08-16 03:08:55 +00:00
|
|
|
|
|
|
|
spi_set_ctldata(spi, chip);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-01-27 10:57:20 +00:00
|
|
|
static void dspi_cleanup(struct spi_device *spi)
|
|
|
|
{
|
|
|
|
struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
|
|
|
|
|
|
|
|
dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
|
2019-08-18 18:01:10 +00:00
|
|
|
spi->controller->bus_num, spi->chip_select);
|
2015-01-27 10:57:20 +00:00
|
|
|
|
|
|
|
kfree(chip);
|
|
|
|
}
|
|
|
|
|
2014-05-07 07:45:41 +00:00
|
|
|
static const struct of_device_id fsl_dspi_dt_ids[] = {
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
{
|
|
|
|
.compatible = "fsl,vf610-dspi",
|
|
|
|
.data = &devtype_data[VF610],
|
|
|
|
}, {
|
|
|
|
.compatible = "fsl,ls1021a-v1.0-dspi",
|
|
|
|
.data = &devtype_data[LS1021A],
|
|
|
|
}, {
|
|
|
|
.compatible = "fsl,ls1012a-dspi",
|
|
|
|
.data = &devtype_data[LS1012A],
|
|
|
|
}, {
|
|
|
|
.compatible = "fsl,ls1043a-dspi",
|
|
|
|
.data = &devtype_data[LS1043A],
|
|
|
|
}, {
|
|
|
|
.compatible = "fsl,ls1046a-dspi",
|
|
|
|
.data = &devtype_data[LS1046A],
|
|
|
|
}, {
|
|
|
|
.compatible = "fsl,ls2080a-dspi",
|
|
|
|
.data = &devtype_data[LS2080A],
|
|
|
|
}, {
|
|
|
|
.compatible = "fsl,ls2085a-dspi",
|
|
|
|
.data = &devtype_data[LS2085A],
|
|
|
|
}, {
|
|
|
|
.compatible = "fsl,lx2160a-dspi",
|
|
|
|
.data = &devtype_data[LX2160A],
|
|
|
|
},
|
2013-08-16 03:08:55 +00:00
|
|
|
{ /* sentinel */ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int dspi_suspend(struct device *dev)
|
|
|
|
{
|
2019-08-18 18:01:10 +00:00
|
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
|
|
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
spi_controller_suspend(ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
clk_disable_unprepare(dspi->clk);
|
|
|
|
|
2015-06-12 16:55:22 +00:00
|
|
|
pinctrl_pm_select_sleep_state(dev);
|
|
|
|
|
2013-08-16 03:08:55 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dspi_resume(struct device *dev)
|
|
|
|
{
|
2019-08-18 18:01:10 +00:00
|
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
|
|
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
|
2016-08-22 02:05:30 +00:00
|
|
|
int ret;
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2015-06-12 16:55:22 +00:00
|
|
|
pinctrl_pm_select_default_state(dev);
|
|
|
|
|
2016-08-22 02:05:30 +00:00
|
|
|
ret = clk_prepare_enable(dspi->clk);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2019-08-18 18:01:10 +00:00
|
|
|
spi_controller_resume(ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
|
2014-02-26 01:30:14 +00:00
|
|
|
static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2018-06-20 07:34:36 +00:00
|
|
|
static const struct regmap_range dspi_volatile_ranges[] = {
|
|
|
|
regmap_reg_range(SPI_MCR, SPI_TCR),
|
|
|
|
regmap_reg_range(SPI_SR, SPI_SR),
|
|
|
|
regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct regmap_access_table dspi_volatile_table = {
|
2019-08-18 18:01:02 +00:00
|
|
|
.yes_ranges = dspi_volatile_ranges,
|
|
|
|
.n_yes_ranges = ARRAY_SIZE(dspi_volatile_ranges),
|
2018-06-20 07:34:36 +00:00
|
|
|
};
|
|
|
|
|
2014-10-09 03:27:45 +00:00
|
|
|
static const struct regmap_config dspi_regmap_config = {
|
2019-08-18 18:01:02 +00:00
|
|
|
.reg_bits = 32,
|
|
|
|
.val_bits = 32,
|
|
|
|
.reg_stride = 4,
|
|
|
|
.max_register = 0x88,
|
|
|
|
.volatile_table = &dspi_volatile_table,
|
2013-08-16 03:08:55 +00:00
|
|
|
};
|
|
|
|
|
2018-06-20 07:34:38 +00:00
|
|
|
static const struct regmap_range dspi_xspi_volatile_ranges[] = {
|
|
|
|
regmap_reg_range(SPI_MCR, SPI_TCR),
|
|
|
|
regmap_reg_range(SPI_SR, SPI_SR),
|
|
|
|
regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
|
|
|
|
regmap_reg_range(SPI_SREX, SPI_SREX),
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct regmap_access_table dspi_xspi_volatile_table = {
|
2019-08-18 18:01:02 +00:00
|
|
|
.yes_ranges = dspi_xspi_volatile_ranges,
|
|
|
|
.n_yes_ranges = ARRAY_SIZE(dspi_xspi_volatile_ranges),
|
2018-06-20 07:34:38 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct regmap_config dspi_xspi_regmap_config[] = {
|
|
|
|
{
|
2019-08-18 18:01:02 +00:00
|
|
|
.reg_bits = 32,
|
|
|
|
.val_bits = 32,
|
|
|
|
.reg_stride = 4,
|
|
|
|
.max_register = 0x13c,
|
|
|
|
.volatile_table = &dspi_xspi_volatile_table,
|
2018-06-20 07:34:38 +00:00
|
|
|
},
|
|
|
|
{
|
2019-08-18 18:01:02 +00:00
|
|
|
.name = "pushr",
|
|
|
|
.reg_bits = 16,
|
|
|
|
.val_bits = 16,
|
|
|
|
.reg_stride = 2,
|
|
|
|
.max_register = 0x2,
|
2018-06-20 07:34:38 +00:00
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2016-10-17 10:02:34 +00:00
|
|
|
static void dspi_init(struct fsl_dspi *dspi)
|
|
|
|
{
|
2019-08-18 18:01:06 +00:00
|
|
|
unsigned int mcr = SPI_MCR_PCSIS;
|
2019-02-05 22:13:49 +00:00
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
|
2019-08-18 18:01:06 +00:00
|
|
|
mcr |= SPI_MCR_XSPI;
|
2019-08-18 18:01:10 +00:00
|
|
|
if (!spi_controller_is_slave(dspi->ctlr))
|
2019-02-05 22:13:49 +00:00
|
|
|
mcr |= SPI_MCR_MASTER;
|
|
|
|
|
|
|
|
regmap_write(dspi->regmap, SPI_MCR, mcr);
|
2016-10-17 10:02:34 +00:00
|
|
|
regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
|
|
|
|
}
|
|
|
|
|
2019-09-24 11:05:47 +00:00
|
|
|
static int dspi_slave_abort(struct spi_master *master)
|
|
|
|
{
|
|
|
|
struct fsl_dspi *dspi = spi_master_get_devdata(master);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Terminate all pending DMA transactions for the SPI working
|
|
|
|
* in SLAVE mode.
|
|
|
|
*/
|
|
|
|
dmaengine_terminate_sync(dspi->dma->chan_rx);
|
|
|
|
dmaengine_terminate_sync(dspi->dma->chan_tx);
|
|
|
|
|
|
|
|
/* Clear the internal DSPI RX and TX FIFO buffers */
|
|
|
|
regmap_update_bits(dspi->regmap, SPI_MCR,
|
|
|
|
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
|
|
|
|
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-03-04 22:00:38 +00:00
|
|
|
/*
|
|
|
|
* EOQ mode will inevitably deassert its PCS signal on last word in a queue
|
|
|
|
* (hardware limitation), so we need to inform the spi_device that larger
|
|
|
|
* buffers than the FIFO size are going to have the chip select randomly
|
|
|
|
* toggling, so it has a chance to adapt its message sizes.
|
|
|
|
*/
|
|
|
|
static size_t dspi_max_message_size(struct spi_device *spi)
|
|
|
|
{
|
|
|
|
struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller);
|
|
|
|
|
|
|
|
if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE)
|
|
|
|
return dspi->devtype_data->fifo_size;
|
|
|
|
|
|
|
|
return SIZE_MAX;
|
|
|
|
}
|
|
|
|
|
2013-08-16 03:08:55 +00:00
|
|
|
static int dspi_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device_node *np = pdev->dev.of_node;
|
2019-08-18 18:01:11 +00:00
|
|
|
const struct regmap_config *regmap_config;
|
|
|
|
struct fsl_dspi_platform_data *pdata;
|
2019-08-18 18:01:10 +00:00
|
|
|
struct spi_controller *ctlr;
|
2019-08-18 18:01:11 +00:00
|
|
|
int ret, cs_num, bus_num;
|
2013-08-16 03:08:55 +00:00
|
|
|
struct fsl_dspi *dspi;
|
|
|
|
struct resource *res;
|
2014-02-12 07:29:05 +00:00
|
|
|
void __iomem *base;
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
|
|
|
|
if (!ctlr)
|
2013-08-16 03:08:55 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
dspi = spi_controller_get_devdata(ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
dspi->pdev = pdev;
|
2019-08-18 18:01:10 +00:00
|
|
|
dspi->ctlr = ctlr;
|
2015-01-27 10:57:22 +00:00
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->setup = dspi_setup;
|
|
|
|
ctlr->transfer_one_message = dspi_transfer_one_message;
|
2020-03-04 22:00:38 +00:00
|
|
|
ctlr->max_message_size = dspi_max_message_size;
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->dev.of_node = pdev->dev.of_node;
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->cleanup = dspi_cleanup;
|
2019-09-24 11:05:47 +00:00
|
|
|
ctlr->slave_abort = dspi_slave_abort;
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2017-10-27 22:23:01 +00:00
|
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
|
|
if (pdata) {
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->num_chipselect = pdata->cs_num;
|
|
|
|
ctlr->bus_num = pdata->bus_num;
|
2013-08-16 03:08:55 +00:00
|
|
|
|
spi: spi-fsl-dspi: Use specific compatible strings for all SoC instantiations
Currently, the device tree bindings submitted in mainline for Layerscape
SoCs look like this:
LS1021A:
compatible = "fsl,ls1021a-v1.0-dspi";
LS1012A:
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
LS2085A:
compatible = "fsl,ls2085a-dspi";
LS2088A:
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
LX2160A:
compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
LS1043A:
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
LS1046A:
compatible = "fsl,ls1021a-v1.0-dspi";
Due to a lack of a more specific compatible string, LS1012A, LS1043A and
LS1046A will fall under the LS1021A umbrella, and LS2088A and LX2160A
under the LS2085A umbrella.
They do work in those modes, but there are slight differences in the
hardware instantiations, mostly related to FIFO sizes (with the more
specific compatible strings, the FIFO size can be increased properly).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-3-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-02 00:19:54 +00:00
|
|
|
/* Only Coldfire uses platform data */
|
|
|
|
dspi->devtype_data = &devtype_data[MCF5441X];
|
2017-10-27 22:23:01 +00:00
|
|
|
} else {
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2017-10-27 22:23:01 +00:00
|
|
|
ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev, "can't get spi-num-chipselects\n");
|
2019-08-18 18:01:10 +00:00
|
|
|
goto out_ctlr_put;
|
2017-10-27 22:23:01 +00:00
|
|
|
}
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->num_chipselect = cs_num;
|
2017-10-27 22:23:01 +00:00
|
|
|
|
|
|
|
ret = of_property_read_u32(np, "bus-num", &bus_num);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev, "can't get bus-num\n");
|
2019-08-18 18:01:10 +00:00
|
|
|
goto out_ctlr_put;
|
2017-10-27 22:23:01 +00:00
|
|
|
}
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->bus_num = bus_num;
|
2017-10-27 22:23:01 +00:00
|
|
|
|
2019-02-05 22:13:49 +00:00
|
|
|
if (of_property_read_bool(np, "spi-slave"))
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->slave = true;
|
2019-02-05 22:13:49 +00:00
|
|
|
|
2017-10-27 22:23:01 +00:00
|
|
|
dspi->devtype_data = of_device_get_match_data(&pdev->dev);
|
|
|
|
if (!dspi->devtype_data) {
|
|
|
|
dev_err(&pdev->dev, "can't get devtype_data\n");
|
|
|
|
ret = -EFAULT;
|
2019-08-18 18:01:10 +00:00
|
|
|
goto out_ctlr_put;
|
2017-10-27 22:23:01 +00:00
|
|
|
}
|
2015-06-09 11:45:27 +00:00
|
|
|
}
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
2018-06-20 07:34:41 +00:00
|
|
|
else
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
|
2018-06-20 07:34:41 +00:00
|
|
|
|
2013-08-16 03:08:55 +00:00
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
2014-02-12 07:29:05 +00:00
|
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
|
|
if (IS_ERR(base)) {
|
|
|
|
ret = PTR_ERR(base);
|
2019-08-18 18:01:10 +00:00
|
|
|
goto out_ctlr_put;
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
|
2018-06-20 07:34:38 +00:00
|
|
|
regmap_config = &dspi_xspi_regmap_config[0];
|
|
|
|
else
|
|
|
|
regmap_config = &dspi_regmap_config;
|
|
|
|
dspi->regmap = devm_regmap_init_mmio(&pdev->dev, base, regmap_config);
|
2014-02-12 07:29:05 +00:00
|
|
|
if (IS_ERR(dspi->regmap)) {
|
|
|
|
dev_err(&pdev->dev, "failed to init regmap: %ld\n",
|
|
|
|
PTR_ERR(dspi->regmap));
|
2017-02-19 13:19:02 +00:00
|
|
|
ret = PTR_ERR(dspi->regmap);
|
2019-08-18 18:01:10 +00:00
|
|
|
goto out_ctlr_put;
|
2014-02-12 07:29:05 +00:00
|
|
|
}
|
|
|
|
|
spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode
The Transfer Complete Flag (TCF) interrupt gets raised after each write
to the TX FIFO (PUSHR) which means that it is not possible to devise a
transfer procedure that makes full utilization of the FIFO depth (4
entries on most controllers, 16 entries on some).
On the other hand, XSPI mode has a feature called "command cycling",
which allows a single TX command to be run for a pre-specified number of
TX words. When the command cycle ends, the Command Transfer Complete
Flag bit asserts and raises an interrupt. The advantage in this mode is
that the TX FIFO can be better utilized (more words can be batched at
once).
Other changes brought by this patch:
- The dspi->rx_end variable has been removed, since now the
dspi_fifo_write function sets up dspi->words_in_flight, so
dspi_fifo_read knows how much to read without overrunning the RX
buffer.
- Stop using poll mode unconditionally for TCFQ mode, since XSPI mode
is a little less efficient than that, and so, poll mode doesn't bring
as many improvements for XSPI.
- Stop relying on the hardware transfer counter (SPI_TCR_GET_TCNT) and
instead increment the message->actual_length based on the newly
introduced dspi->words_in_flight variable.
- The CTARE register is now written in the hotpath instead of just at
transfer init time, since it contains the DTCP field (transfer
preload - the counter indicating how many txdata words will follow),
which is a dynamic value.
Due to the fact that the Chip Select toggling setting is part of the
command written to the TX FIFO, the ending word of each buffer needs to
be sent via its own TX command, so that we have a chance to emit a
1-word command with deasserted PCS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-9-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-04 22:00:40 +00:00
|
|
|
if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE) {
|
2018-06-20 07:34:38 +00:00
|
|
|
dspi->regmap_pushr = devm_regmap_init_mmio(
|
|
|
|
&pdev->dev, base + SPI_PUSHR,
|
|
|
|
&dspi_xspi_regmap_config[1]);
|
|
|
|
if (IS_ERR(dspi->regmap_pushr)) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"failed to init pushr regmap: %ld\n",
|
|
|
|
PTR_ERR(dspi->regmap_pushr));
|
2018-06-21 13:22:09 +00:00
|
|
|
ret = PTR_ERR(dspi->regmap_pushr);
|
2019-08-18 18:01:10 +00:00
|
|
|
goto out_ctlr_put;
|
2018-06-20 07:34:38 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-06-29 11:33:09 +00:00
|
|
|
dspi->clk = devm_clk_get(&pdev->dev, "dspi");
|
|
|
|
if (IS_ERR(dspi->clk)) {
|
|
|
|
ret = PTR_ERR(dspi->clk);
|
|
|
|
dev_err(&pdev->dev, "unable to get clock\n");
|
2019-08-18 18:01:10 +00:00
|
|
|
goto out_ctlr_put;
|
2018-06-29 11:33:09 +00:00
|
|
|
}
|
|
|
|
ret = clk_prepare_enable(dspi->clk);
|
|
|
|
if (ret)
|
2019-08-18 18:01:10 +00:00
|
|
|
goto out_ctlr_put;
|
2018-06-29 11:33:09 +00:00
|
|
|
|
2016-10-17 10:02:34 +00:00
|
|
|
dspi_init(dspi);
|
2019-08-22 21:15:13 +00:00
|
|
|
|
2013-08-16 03:08:55 +00:00
|
|
|
dspi->irq = platform_get_irq(pdev, 0);
|
2019-08-22 21:15:13 +00:00
|
|
|
if (dspi->irq <= 0) {
|
|
|
|
dev_info(&pdev->dev,
|
|
|
|
"can't get platform irq, using poll mode\n");
|
|
|
|
dspi->irq = 0;
|
|
|
|
goto poll_mode;
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
2018-10-29 03:11:16 +00:00
|
|
|
ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt,
|
|
|
|
IRQF_SHARED, pdev->name, dspi);
|
2013-08-16 03:08:55 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
|
2018-06-29 11:33:09 +00:00
|
|
|
goto out_clk_put;
|
2013-08-16 03:08:55 +00:00
|
|
|
}
|
|
|
|
|
2019-08-22 21:15:13 +00:00
|
|
|
init_waitqueue_head(&dspi->waitq);
|
|
|
|
|
|
|
|
poll_mode:
|
2019-09-05 01:01:13 +00:00
|
|
|
|
2016-11-10 12:19:15 +00:00
|
|
|
if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
|
2017-05-22 13:19:20 +00:00
|
|
|
ret = dspi_request_dma(dspi, res->start);
|
|
|
|
if (ret < 0) {
|
2016-11-10 12:19:15 +00:00
|
|
|
dev_err(&pdev->dev, "can't get dma channels\n");
|
|
|
|
goto out_clk_put;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
ctlr->max_speed_hz =
|
2016-03-21 20:11:52 +00:00
|
|
|
clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
|
|
|
|
|
2020-03-02 00:19:57 +00:00
|
|
|
if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE)
|
|
|
|
ctlr->ptp_sts_supported = true;
|
2019-09-05 01:01:13 +00:00
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
platform_set_drvdata(pdev, ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
2019-08-18 18:01:10 +00:00
|
|
|
ret = spi_register_controller(ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
if (ret != 0) {
|
2019-08-18 18:01:10 +00:00
|
|
|
dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
|
2013-08-16 03:08:55 +00:00
|
|
|
goto out_clk_put;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
out_clk_put:
|
|
|
|
clk_disable_unprepare(dspi->clk);
|
2019-08-18 18:01:10 +00:00
|
|
|
out_ctlr_put:
|
|
|
|
spi_controller_put(ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dspi_remove(struct platform_device *pdev)
|
|
|
|
{
|
2019-08-18 18:01:10 +00:00
|
|
|
struct spi_controller *ctlr = platform_get_drvdata(pdev);
|
|
|
|
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
|
|
|
/* Disconnect from the SPI framework */
|
2016-11-10 12:19:15 +00:00
|
|
|
dspi_release_dma(dspi);
|
2013-10-12 07:15:31 +00:00
|
|
|
clk_disable_unprepare(dspi->clk);
|
2019-08-18 18:01:10 +00:00
|
|
|
spi_unregister_controller(dspi->ctlr);
|
2013-08-16 03:08:55 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver fsl_dspi_driver = {
|
2019-08-18 18:01:02 +00:00
|
|
|
.driver.name = DRIVER_NAME,
|
|
|
|
.driver.of_match_table = fsl_dspi_dt_ids,
|
|
|
|
.driver.owner = THIS_MODULE,
|
|
|
|
.driver.pm = &dspi_pm,
|
|
|
|
.probe = dspi_probe,
|
|
|
|
.remove = dspi_remove,
|
2013-08-16 03:08:55 +00:00
|
|
|
};
|
|
|
|
module_platform_driver(fsl_dspi_driver);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Freescale DSPI Controller Driver");
|
2013-09-10 08:46:33 +00:00
|
|
|
MODULE_LICENSE("GPL");
|
2013-08-16 03:08:55 +00:00
|
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|